blob: f5ff16fb3fbdfb8d86b4f0e583d9cd6c3e64ae99 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
|
# Commercial Licensed Packages
Append to following lines to **conf/local.conf** to include libomxil under a commercial license to your build:
```bash
# For libomxil
LICENSE_FLAGS_WHITELIST = "commercial"
IMAGE_INSTALL_append = " libomxil"
```
# Raspberry Pi Touchscreen with Rotation
If you have Raspberry Pi official 7" touchscreen connected, you can rotate it with these lines in /etc/xdg/weston/weston.ini
```bash
root@raspberrypi3:/etc/xdg/weston# cat weston.ini
[core]
backend=drm-backend.so
shell=desktop-shell.so
[shell]
locking=true
# Uncomment below to hide panel
#panel-location=none
[launcher]
icon=/usr/share/weston/terminal.png
path=/usr/bin/weston-terminal
[launcher]
icon=/usr/share/weston/icon_flower.png
path=/usr/bin/weston-flower
[output]
name=DSI-1
transform=270
```
# Debugging
It is possible to debug AGL images on Raspberry Pi using 3.3V USB to serial cable, such as [Olimex USB-Serial-Cable-F](https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/), connected to the UART of the board. Follow the instructions below to connect a cable to the board (do it on your own risk, no warranty is provided):
* Connect the BLUE wire if you are using Olimex USB-Serial-Cable-F to pin 6 of Raspberry Pi,
* Connect the RX line of the cable (GREEN wire if you are using Olimex USB-Serial-Cable-F) to pin 8 (TX line) of Raspberry Pi,
* Connect the TX line of the cable (RED wire if you are using Olimex USB-Serial-Cable-F) to pin 10 (RX line) of Raspberry Pi.
* Plug the USB connector of the cable to your computer and use your favorite tool for serial communication, for example on Ubuntu and other Linux distributions you may use screen:
```bash
sudo screen /dev/ttyUSB0 115200
```
Pay attention that the colors of the cable may vary depending on the vendor. If you have USB console cable from Adafruit please have a look [here](https://learn.adafruit.com/adafruits-raspberry-pi-lesson-5-using-a-console-cable/connect-the-lead).
|
