aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSebastien Douheret <sebastien.douheret@iot.bzh>2018-06-04 15:54:13 +0200
committerJonathan Aillet <jonathan.aillet@iot.bzh>2018-10-08 15:51:55 +0200
commit249617727566e04fdb859be21a69531a16b9764b (patch)
tree1bdf92b6f47be66ccd1b5bf36ffdb0703289e38b
parentc2c210a4d14287e83c97dfccdd36682fc3b5c727 (diff)
Fixed README.md
Change-Id: I835119e68aaf2eb7d5576d93f15bd4a7bfd55a29 Signed-off-by: Sebastien Douheret <sebastien.douheret@iot.bzh>
-rw-r--r--README.md159
1 files changed, 76 insertions, 83 deletions
diff --git a/README.md b/README.md
index a7247ee..5ced714 100644
--- a/README.md
+++ b/README.md
@@ -7,7 +7,6 @@
* Author: Jonathan Aillet jonathan.aillet@iot.bzh
* Date : June-2018
-
## Cloning repositories for RC1 version
### Cloning 4a-hal-generic rc1 version with its submodules
@@ -18,19 +17,17 @@ git clone --recurse-submodules -b rc1 https://github.com/iotbzh/4a-hal-generic.g
git clone --recurse-submodules -b hal-rc1-sandbox https://github.com/iotbzh/4a-softmixer.git
-
## Quick introduction to how hal are handled with 4a-hal-generic
* At startup of the 4a-hal binding, a new api called '4a-hal-manger' will be created.
- This api is meant to provide verbs to list the loaded hal in your system and to now there current status.
+ This api is meant to provide verbs to list the loaded hals in your system and to know there current status.
* The '4a-hal-manager' will also create a new hal for each audio configuration files found.
- These configration files are used by the controller and are meant to be used with a mixer.
+ These configuration files are used by the controller and are meant to be used with a mixer.
* External hal (e.g. loaded in another binding) can be loaded/unloaded into '4a-hal-manger' by reaching it
- with this hal. It must provides information such as 'api' and 'uid' at loading. It must also provides
- a subscription to an event that the '4a-hal-manager' will use to known this hal status.
+ with this hal. It must provide information such as 'api' and 'uid' at loading. It must also provide
+ a subscription to an event that the '4a-hal-manager' will use to know this hal status.
WARNING: not fully implemented yet.
-
## Preparation
### Install Alsa Loopback
@@ -38,85 +35,82 @@ git clone --recurse-submodules -b hal-rc1-sandbox https://github.com/iotbzh/4a-s
You must have snd-aloop enabled as a module in the running kernel.
Check that this way on the target:
-```
- zcat /proc/config.gz | grep CONFIG_SND_ALOOP
- CONFIG_SND_ALOOP=m
+```bash
+zcat /proc/config.gz | grep CONFIG_SND_ALOOP
+CONFIG_SND_ALOOP=m
```
-If it not the case, run menuconfig and enable it under:
+If it is not the case, run menuconfig and enable it under:
> Device Drivers > Sound card support > Advanced Linux Sound Architecture > Generic sound device
-
-```
- sudo modprobe snd-aloop
+```bash
+sudo modprobe snd-aloop
```
-### Create a new hal json configuration correponding to your audio hardware configuration
+### Create a new hal json configuration corresponding to your audio hardware configuration
#### Information about audio json configuration files
-* All audio hardware configuration files are a json description of you audio device.
+* All audio hardware configuration files are a json description of your audio devices.
* They all must be in ./4a-hal-references-boards-cfg/ and must begin with 'hal-4a'.
* You can found some examples of these configurations in this directory.
* Each configuration file found at startup will create a new hal with its own api.
-* At 'init-mixer' command of your hal, your
+* At 'init-mixer' hal command, your mixer configuration will be sent.
-#### What you need to set in this configuration file to make you audio work
+#### What you need to set in this configuration file to make your audio work
-* In 'metadata' section:
- * The 'uid' field must be the path to your alsa audio device.
- * The 'api' field should be changed to the desired application framework api of you hal
-* For 'onload', 'controls', and 'events' sections, please look at the controller documentation
+* In `metadata` section:
+ * The `uid` field must be the path to your alsa audio device.
+ * The `api` field should be changed to the desired application framework api of your hal
+* For `onload`, `controls`, and `events` sections, please look at the controller documentation
(In ./app-controller/README.md)
-* In 'halcontrol' section:
+* In `halcontrol` section:
+ * WARNING: use of this section is not yet implemented
* This section is where you put controls which are alsa control calls
* If a control is not available, it will be registered in alsa using '4a-alsa-core'
- * Thsese controls will be available as verb for your hal api using 'card/' prefix
- * WARNING: use of this section is not yet implemented
-* In 'halmixer' section (what it is passed to the mixer):.
- * The 'uid' field will be the name of the mixer correponding to your hal
- * The 'mixerapi' field should contain the name of the api to call for reaching the mixer
+ * These controls will be available as verb for your hal api using 'card/' prefix
+* In `halmixer` section (what it is passed to the mixer):
+ * The `uid` field will be the name of the mixer corresponding to your hal
+ * The `mixerapi` field should contain the name of the api to call for reaching the mixer
(not need to be changed if you use '4a-softmixer').
- * The 'backend' section will contain your audio information (such as the path to you alsa audio device
- and the configration of you device).
- * In 'frontend' section:
- * In 'ramps' section: will be defined the ramp that you can use in your mixer (ramps in example files can be used).
- * In 'zones' section: (zones in example files can be used)
- * You can defined the zones that you want for your mixer.
- * You must defined which sink will be used in these zones.
- * These zones will be used to defined streams.
- * In 'streams' section: (streams in example files can be used)
- * You can defined the streams that you want for your mixer.
+ * The `backend` section will contain your audio information (such as the path to you alsa audio device
+ and the configuration of your device).
+ * In `frontend` section:
+ * In `ramps` section: will be defined the ramp that you can use in your mixer (ramps in example files can be used).
+ * In `zones` section: (zones in example files can be used)
+ * You can define the zones that you want for your mixer.
+ * You must define which sink will be used in these zones.
+ * These zones will be used to define streams.
+ * In `streams` section: (streams in example files can be used)
+ * You can define the streams that you want for your mixer.
* It must contain:
- * A 'uid' field (which will be used to reach the stream).
- * The 'zone' field must correspond to the wanted zone of the stream.
- * The 'ramp' field must correspond to the wanted ramp of the stream.
+ * A `uid` field (which will be used to reach the stream).
+ * The `zone` field must correspond to the wanted zone of the stream.
+ * The `ramp` field must correspond to the wanted ramp of the stream.
* Other fields are optionals
-
## Compile (for each repositories)
+```bash
+mkdir build
+cd build
+cmake ..
+make
```
- mkdir build
- cd build
- cmake ..
- make
-```
-
## Using '4a-hal' binder
### Run your binder from shell
-```
-afb-daemon --name=afb-4a --workdir=/home/jon/work/agl-audio/4a-softmixer/build --binding=/home/jon/work/agl-audio/4a-softmixer/build/package/lib/softmixer-binding.so --binding=/home/jon/work/agl-audio/4a-hal-generic/build/4a-hal/4a-hal.so --roothttp=/home/jon/work/agl-audio/4a-softmixer/build/package/htdocs --no-ldpaths --port=1234 --token= -vvv
+```bash
+afb-daemon --name=afb-4a --workdir=$PATH_TO_4a-softmixer/build --binding=$$PATH_TO_4a-softmixer/build/package/lib/softmixer-binding.so --binding=$PATH_TO_4a-hal-generic/build/4a-hal/4a-hal.so --roothttp=$PATH_TO_4a-softmixer/build/package/htdocs --no-ldpaths --port=1234 --token= -vvv
```
### Connect your binder
Connect to your 4a binder using afb-client-demo
-```
+```bash
afb-client-demo ws://localhost:1234/api?token=
```
@@ -126,72 +120,72 @@ In the connected client, try to list the loaded hal:
```4a-hal-manager loaded```
-And now with more informations:
+And now with more information:
```4a-hal-manager loaded { "verbose" : 1 }```
### Play with an 'internal' hal (described in a json configuration file)
-#### Initalize an internal hal
+#### Initialize an internal hal
Use an api name obtain in the previous command to initialize mixer of the wanted hal:
```4a-hal-*halapiname* init-mixer```
-#### Get streams informations
+#### Get streams information
-Now, you can obtain streams information of your initalized internal hal:
+Now, you can obtain streams information of your initialized internal hal:
```4a-hal-*halapiname* list```
-All the streams listed are available as a verb of the hal api using 'name' field.
-You can also get the corresponding card id of the stream in 'cardId' field.
-The card id of a stream is 'hw:X,X,X' format and can be used to play music.
+All the streams listed are available as a verb of the hal api using `name` field.
+You can also get the corresponding card id of the stream in `cardId` field.
+The card id format of a stream is `hw:X,X,X` and can be used to play music.
#### Play some music into a stream
-WARNING: Current version does not handle audio rate conversion, using gstreamer or equivalent to match with audio hardware params is mandatory.
+WARNING: Current version does not handle audio rate conversion, using gstreamer
+or equivalent with audio hardware params is mandatory.
-Use the previously obtain card if to play audio in the selected stream:
+Use the previously obtain card id to play audio in the selected stream:
-```gst123 --audio-output alsa=hw:X,X,X your_audio_file.mp3```
+`gst123 --audio-output alsa=hw:X,X,X your_audio_file.mp3`
#### During playing, try the stream commands to change/ramp volume
-Now you can use your hal api to send command to mixer. This way, you can change/ramp volume :
-
-``` 4a-hal-*halapiname* *selected_stream* { "volume" : "+10" }```
+Now you can use your hal api to send commands to mixer. This way, you can change/ramp volume :
-``` 4a-hal-*halapiname* *selected_stream* { "volume" : 70 }```
+`4a-hal-*halapiname* *selected_stream* { "volume" : "+10" }`
-``` 4a-hal-*halapiname* *selected_stream* { "ramp" : "-10" }```
+`4a-hal-*halapiname* *selected_stream* { "volume" : 70 }`
-``` 4a-hal-*halapiname* *selected_stream* { "ramp" : 100 }```
+`4a-hal-*halapiname* *selected_stream* { "ramp" : "-10" }`
+`4a-hal-*halapiname* *selected_stream* { "ramp" : 100 }`
#### Warning
-Alsa try top automatically store current state into /var/lib/alsa/asound.state when developing/testing this may create impossible
-situation. In order to clean up your Alsa snd-aloop config, a simple "rmmod" might not be enough in some case you may have to delete
-/var/lib/alsa/asound.state before applying "modprobe".
+Alsa try to automatically store current state into `/var/lib/alsa/asound.state`
+that may result to odd situation during development/testing. In order to clean
+up your Alsa snd-aloop config, a simple `rmmod` might not be enough in some case
+you may have to delete `/var/lib/alsa/asound.state` before applying `modprobe`.
-In case of doubt check with folling command that you start from a clear green field
+In case of doubt, check with following command that you start from a clear green field
+```bash
+rmmod snd-aloop && modprobe --first-time snd-aloop && amixer -D hw:Loopback controls | grep vol
```
-rmmod snd-aloop && modprobe --first-time snd-aloop && amixer -D hw:Loopback controls | grep vol
-```
-
### Load an 'external' hal
To load an external to '4a-hal-manger', you need to you use an 'api_call' from you hal binding.
-With this 'api_call' you must sent a json descition of your api:
+With this 'api_call' you must sent a json description of your api:
-```
+```json
{
"api" : mandatory, string that is your hal binding api
"uid" : mandatory, string that specify your hal uid (usually the device used by your hal)
- "info" : optional, string that describe your hal
+ "info" : optional, string that describes your hal
"author" : optional, string that says who is the author of your hal
"version" : optional, string that says what is the version of your hal
"date" : optional, string that says the date of your hal
@@ -200,17 +194,16 @@ With this 'api_call' you must sent a json descition of your api:
Your hal must also have a 'subscribe' verb available and event name 'hal_status'.
-At external hal loading, the '4a-hal-manager' will subscibe to this event.
+At external hal loading, the '4a-hal-manager' will subscribe to this event.
Within your hal, you must generate an event each time the status of your hal changes.
-
## What is missing in RC1 version
-* Check that external really exist at loading
+* Check that external hal really exist at loading
* Handling external hal status events.
* Handling 'halcontrol' section in configuration files.
-* Generation of an event of '4a-hal-manager' when a hal status change.
+* Generation of an '4a-hal-manager' event when a hal status change.
* Checking that the specified device in configuration file is present ('4a-alsa-core' binding will be needed).
-* Actualization of the internal hal status after mixer initialization.
+* Update internal hal status after mixer initialization.
* At mixer initialization, check that the specified device is not already used by another hal.
-* Dynamic handling of USB devices. \ No newline at end of file
+* Dynamic handling of USB devices.