summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--README.md218
1 files changed, 216 insertions, 2 deletions
diff --git a/README.md b/README.md
index 15e86f8..a7247ee 100644
--- a/README.md
+++ b/README.md
@@ -1,2 +1,216 @@
-# 4a-hal-generic
-New 4A HAL which makes use of the controller submodule
+# 4a-hal-generic for 4A (AGL Advance Audio Architecture).
+
+------------------------------------------------------------
+
+* Object: Use a new api to centralize call to hals, automatically create hal api from configuration files
+* Status: In Progress (RC1)
+* Author: Jonathan Aillet jonathan.aillet@iot.bzh
+* Date : June-2018
+
+
+## Cloning repositories for RC1 version
+
+### Cloning 4a-hal-generic rc1 version with its submodules
+
+git clone --recurse-submodules -b rc1 https://github.com/iotbzh/4a-hal-generic.git
+
+### Cloning 4a-softmixer hal-rc1 version (needed to make work '4a-hal-generic') with its submodules
+
+git clone --recurse-submodules -b hal-rc1-sandbox https://github.com/iotbzh/4a-softmixer.git
+
+
+## Quick introduction to how hal are handled with 4a-hal-generic
+
+* At startup of the 4a-hal binding, a new api called '4a-hal-manger' will be created.
+ This api is meant to provide verbs to list the loaded hal in your system and to now there current status.
+* The '4a-hal-manager' will also create a new hal for each audio configuration files found.
+ These configration files are used by the controller and are meant to be used with a mixer.
+* External hal (e.g. loaded in another binding) can be loaded/unloaded into '4a-hal-manger' by reaching it
+ with this hal. It must provides information such as 'api' and 'uid' at loading. It must also provides
+ a subscription to an event that the '4a-hal-manager' will use to known this hal status.
+ WARNING: not fully implemented yet.
+
+
+## Preparation
+
+### Install Alsa Loopback
+
+You must have snd-aloop enabled as a module in the running kernel.
+Check that this way on the target:
+
+```
+ zcat /proc/config.gz | grep CONFIG_SND_ALOOP
+ CONFIG_SND_ALOOP=m
+```
+
+If it not the case, run menuconfig and enable it under:
+> Device Drivers > Sound card support > Advanced Linux Sound Architecture > Generic sound device
+
+
+```
+ sudo modprobe snd-aloop
+```
+
+### Create a new hal json configuration correponding to your audio hardware configuration
+
+#### Information about audio json configuration files
+
+* All audio hardware configuration files are a json description of you audio device.
+* They all must be in ./4a-hal-references-boards-cfg/ and must begin with 'hal-4a'.
+* You can found some examples of these configurations in this directory.
+* Each configuration file found at startup will create a new hal with its own api.
+* At 'init-mixer' command of your hal, your
+
+#### What you need to set in this configuration file to make you audio work
+
+* In 'metadata' section:
+ * The 'uid' field must be the path to your alsa audio device.
+ * The 'api' field should be changed to the desired application framework api of you hal
+* For 'onload', 'controls', and 'events' sections, please look at the controller documentation
+ (In ./app-controller/README.md)
+* In 'halcontrol' section:
+ * This section is where you put controls which are alsa control calls
+ * If a control is not available, it will be registered in alsa using '4a-alsa-core'
+ * Thsese controls will be available as verb for your hal api using 'card/' prefix
+ * WARNING: use of this section is not yet implemented
+* In 'halmixer' section (what it is passed to the mixer):.
+ * The 'uid' field will be the name of the mixer correponding to your hal
+ * The 'mixerapi' field should contain the name of the api to call for reaching the mixer
+ (not need to be changed if you use '4a-softmixer').
+ * The 'backend' section will contain your audio information (such as the path to you alsa audio device
+ and the configration of you device).
+ * In 'frontend' section:
+ * In 'ramps' section: will be defined the ramp that you can use in your mixer (ramps in example files can be used).
+ * In 'zones' section: (zones in example files can be used)
+ * You can defined the zones that you want for your mixer.
+ * You must defined which sink will be used in these zones.
+ * These zones will be used to defined streams.
+ * In 'streams' section: (streams in example files can be used)
+ * You can defined the streams that you want for your mixer.
+ * It must contain:
+ * A 'uid' field (which will be used to reach the stream).
+ * The 'zone' field must correspond to the wanted zone of the stream.
+ * The 'ramp' field must correspond to the wanted ramp of the stream.
+ * Other fields are optionals
+
+
+## Compile (for each repositories)
+
+```
+ mkdir build
+ cd build
+ cmake ..
+ make
+```
+
+
+## Using '4a-hal' binder
+
+### Run your binder from shell
+
+```
+afb-daemon --name=afb-4a --workdir=/home/jon/work/agl-audio/4a-softmixer/build --binding=/home/jon/work/agl-audio/4a-softmixer/build/package/lib/softmixer-binding.so --binding=/home/jon/work/agl-audio/4a-hal-generic/build/4a-hal/4a-hal.so --roothttp=/home/jon/work/agl-audio/4a-softmixer/build/package/htdocs --no-ldpaths --port=1234 --token= -vvv
+```
+
+### Connect your binder
+
+Connect to your 4a binder using afb-client-demo
+
+```
+afb-client-demo ws://localhost:1234/api?token=
+```
+
+### List the loaded hal
+
+In the connected client, try to list the loaded hal:
+
+```4a-hal-manager loaded```
+
+And now with more informations:
+
+```4a-hal-manager loaded { "verbose" : 1 }```
+
+### Play with an 'internal' hal (described in a json configuration file)
+
+#### Initalize an internal hal
+
+Use an api name obtain in the previous command to initialize mixer of the wanted hal:
+
+```4a-hal-*halapiname* init-mixer```
+
+#### Get streams informations
+
+Now, you can obtain streams information of your initalized internal hal:
+
+```4a-hal-*halapiname* list```
+
+All the streams listed are available as a verb of the hal api using 'name' field.
+You can also get the corresponding card id of the stream in 'cardId' field.
+The card id of a stream is 'hw:X,X,X' format and can be used to play music.
+
+#### Play some music into a stream
+
+WARNING: Current version does not handle audio rate conversion, using gstreamer or equivalent to match with audio hardware params is mandatory.
+
+Use the previously obtain card if to play audio in the selected stream:
+
+```gst123 --audio-output alsa=hw:X,X,X your_audio_file.mp3```
+
+#### During playing, try the stream commands to change/ramp volume
+
+Now you can use your hal api to send command to mixer. This way, you can change/ramp volume :
+
+``` 4a-hal-*halapiname* *selected_stream* { "volume" : "+10" }```
+
+``` 4a-hal-*halapiname* *selected_stream* { "volume" : 70 }```
+
+``` 4a-hal-*halapiname* *selected_stream* { "ramp" : "-10" }```
+
+``` 4a-hal-*halapiname* *selected_stream* { "ramp" : 100 }```
+
+
+#### Warning
+
+Alsa try top automatically store current state into /var/lib/alsa/asound.state when developing/testing this may create impossible
+situation. In order to clean up your Alsa snd-aloop config, a simple "rmmod" might not be enough in some case you may have to delete
+/var/lib/alsa/asound.state before applying "modprobe".
+
+In case of doubt check with folling command that you start from a clear green field
+
+```
+rmmod snd-aloop && modprobe --first-time snd-aloop && amixer -D hw:Loopback controls | grep vol
+```
+
+
+### Load an 'external' hal
+
+To load an external to '4a-hal-manger', you need to you use an 'api_call' from you hal binding.
+With this 'api_call' you must sent a json descition of your api:
+
+```
+{
+ "api" : mandatory, string that is your hal binding api
+ "uid" : mandatory, string that specify your hal uid (usually the device used by your hal)
+ "info" : optional, string that describe your hal
+ "author" : optional, string that says who is the author of your hal
+ "version" : optional, string that says what is the version of your hal
+ "date" : optional, string that says the date of your hal
+}
+```
+
+Your hal must also have a 'subscribe' verb available and event name 'hal_status'.
+
+At external hal loading, the '4a-hal-manager' will subscibe to this event.
+Within your hal, you must generate an event each time the status of your hal changes.
+
+
+## What is missing in RC1 version
+
+* Check that external really exist at loading
+* Handling external hal status events.
+* Handling 'halcontrol' section in configuration files.
+* Generation of an event of '4a-hal-manager' when a hal status change.
+* Checking that the specified device in configuration file is present ('4a-alsa-core' binding will be needed).
+* Actualization of the internal hal status after mixer initialization.
+* At mixer initialization, check that the specified device is not already used by another hal.
+* Dynamic handling of USB devices. \ No newline at end of file