Initial working version as independent repo

20 files changed, 0 insertions, 3105 deletions

diff --git a/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt
deleted file mode 100644
index 3204dd1..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-ADD_SUBDIRECTORY(ucs2-vol)
-
-# Add target to project dependency list
-PROJECT_TARGET_ADD(hal-most-unicens)
-
-    # Define project Targets
-    ADD_LIBRARY(hal-most-unicens MODULE hal_most_unicens.c wrap-json.c wrap_unicens.c wrap_volume.c)
-
-    # Binder exposes a unique public entry point
-    SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES
-	PREFIX "afb-"
-        LABELS "BINDING"
-	LINK_FLAGS  ${BINDINGS_LINK_FLAG}
-        OUTPUT_NAME ${TARGET_NAME}
-    )
-
-    # Library dependencies (include updates automatically)
-    TARGET_LINK_LIBRARIES(${TARGET_NAME}
-        hal-interface
-        audio-common
-        ucs2-volume
-        ${link_libraries}
-    )
-
-    # Define properties to expose when others use this target
-    TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME}
-       PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/ucs2-vol/inc
-    )
diff --git a/HAL-afb/HAL_MOST_UNICENS/README.md b/HAL-afb/HAL_MOST_UNICENS/README.md
deleted file mode 100644
index 4ce4261..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/README.md
+++ /dev/null
@@ -1,51 +0,0 @@
-
-# HAL for MOST Sound Card
-
-## Introduction
-This Hardware Abstraction Layer (HAL) is intended to control MOST audio via
-standard ALSA mixer controls. Therefore the HAL add's controls to the MOST sound
-card. Modification of the mixer controls is mapped to control commands which are
-send to MOST nodes.
-
-The HAL requires to access the UNICENS V2 binding which is setting up the MOST
-network and the MOST node.
-
-Please check the following required components:
-* MOST Linux Driver
-* User must be member of "audio" group
-* UNICENS V2 binding
-* [K2L MOST150 Audio 5.1 Kit](https://www.k2l.de/products/74/MOST150%20Audio%205.1%20Kit/)
-
-## Possible Modifications
-Check if you need to adapt the default path for UNICENS configuration, e.g.
-```
-#define XML_CONFIG_PATH "/opt/AGL/unicens2-binding/config_multichannel_audio_kit.xml"
-```
-
-Check if you need to adapt the name of the MOST sound card.
-```
-#define ALSA_CARD_NAME  "Microchip MOST:1"
-```
-
-You can check your MOST sound card name by calling ```aplay -l```, e.g.
-```
-aplay -l
-**** List of PLAYBACK Hardware Devices ****
-card 0: PCH [HDA Intel PCH], device 0: 92HD90BXX Analog [92HD90BXX Analog]
-  Subdevices: 1/1
-  Subdevice #0: subdevice #0
-card 1: ep016ch [Microchip MOST:1], device 0: ep01-6ch []
-  Subdevices: 1/1
-  Subdevice #0: subdevice #0
-card 2: ep022ch [Microchip MOST:2], device 0: ep02-2ch []
-  Subdevices: 1/1
-  Subdevice #0: subdevice #0
-
-```
-Choose the first sound card with 6 channels, e.g. if you see ```ep01-6ch``` just
-take ```Microchip MOST:1```.
-
-If you get messed up with card enumeration the following action may help:
-- Unplug your MOST USB hardware from target
-- Call ```sudo rm /var/lib/alsa/asound.state```
-- Connect MOST USB hardware after reboot or restart of ALSA
diff --git a/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c b/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c
deleted file mode 100644
index 5e29b59..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
- * Author Tobias Jahnke
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-#define _GNU_SOURCE
-#include <string.h>
-#include "hal-interface.h"
-#include "audio-common.h"
-#include "wrap-json.h"
-#include "wrap_unicens.h"
-#include "wrap_volume.h"
-
-#ifndef UCS2_CFG_PATH
-# define UCS2_CFG_PATH "/home/agluser/DEVELOPMENT/AGL/BINDING/unicens2-binding/data"
-#endif
-
-#define ALSA_CARD_NAME    "Microchip MOST:1"
-#define ALSA_DEVICE_ID    "hw:1"
-#define PCM_MAX_CHANNELS  6
-
-static int master_volume;
-static json_bool master_switch;
-static int pcm_volume[PCM_MAX_CHANNELS];
-
-static void unicens_request_card_values_cb(void *closure, int status, struct json_object *j_response) {
-    
-    json_object *j_obj;
-    int num_id;
-    int values[6];
-    
-    AFB_INFO("unicens_request_card_values_cb: closure=%p status=%d, res=%s", closure, status, json_object_to_json_string(j_response));
-    
-    json_object_object_get_ex(j_response, "response", &j_obj);
-    
-    if (json_object_is_type(j_obj, json_type_object)) {
-       
-    }
-    else if (json_object_is_type(j_obj, json_type_array)) {
-        AFB_ERROR("unicens_request_card_values_cb: array not handled yet");
-        return;
-    }
-    else {
-        AFB_ERROR("unicens_request_card_values_cb: unknown response type");
-        return;
-    }
-    
-    if (wrap_json_unpack(j_obj, "{s:i, s:[iiiiii!]}", "id", &num_id, "val", 
-            &values[0], &values[1], &values[2], &values[3], &values[4], &values[5])
-            == 0) {
-        AFB_NOTICE("unicens_request_card_values_cb: success, num id:%d", num_id);
-    }
-    else {
-        AFB_ERROR("unicens_request_card_values_cb: unpack failure");
-        return;
-    }
-    
-#if 0
-    if (num_id == 2) {
-        wrap_volume_pcm(&values[0], 6);
-    }
-#endif
-    
-}
-
-__attribute__ ((unused)) static void unicens_request_card_values(const char* dev_id) {
-
-    int err;
-    json_object *j_query = NULL;
-    
-    err = wrap_json_pack(&j_query, "{s:s, s:i}", "devid", dev_id, "mode", 0);
-
-    if (err) {
-        AFB_ERROR("Failed to call wrap_json_pack");
-        goto OnErrorExit;
-    }   
-
-    afb_service_call("alsacore", "ctlget", j_query,
-            &unicens_request_card_values_cb,
-            NULL);
-    
-    if (err) {
-        AFB_ERROR("Failed to call listconfig");
-        goto OnErrorExit;
-    }
-    
-OnErrorExit:
-    return;
-}
-
-void unicens_master_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle,  json_object *j_obj) {
-
-    const char *j_str = json_object_to_json_string(j_obj);
-
-    if (wrap_json_unpack(j_obj, "[i!]", &master_volume) == 0) {
-        AFB_NOTICE("master_volume: %s, value=%d", j_str, master_volume);
-        wrap_volume_master(master_volume);
-    }
-    else {
-        AFB_NOTICE("master_volume: INVALID STRING %s", j_str);
-    }
-}
-
-void unicens_master_switch_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle,  json_object *j_obj) {
-
-    const char *j_str = json_object_to_json_string(j_obj);
-
-    if (wrap_json_unpack(j_obj, "[b!]", &master_switch) == 0) {
-        AFB_NOTICE("master_switch: %s, value=%d", j_str, master_switch);
-    }
-    else {
-        AFB_NOTICE("master_switch: INVALID STRING %s", j_str);
-    }
-}
-
-void unicens_pcm_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle,  json_object *j_obj) {
-
-    const char *j_str = json_object_to_json_string(j_obj);
-
-    if (wrap_json_unpack(j_obj, "[iiiiii!]", &pcm_volume[0], &pcm_volume[1], &pcm_volume[2], &pcm_volume[3],
-                                             &pcm_volume[4], &pcm_volume[5]) == 0) {
-        AFB_NOTICE("pcm_vol: %s", j_str);
-        wrap_volume_pcm(pcm_volume, PCM_MAX_CHANNELS/*array size*/);
-    }
-    else {
-        AFB_NOTICE("pcm_vol: INVALID STRING %s", j_str);
-    }
-}
-
-/* declare ALSA mixer controls */
-STATIC alsaHalMapT  alsaHalMap[]= {
-  { .tag=Master_Playback_Volume, .cb={.callback=unicens_master_vol_cb, .handle=&master_volume}, .info="Sets master playback volume",
-    .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=1, .minval=0, .maxval=100, .step=1, .value=50, .name="Master Playback Volume"}
-  },
-  /*{ .tag=Master_OnOff_Switch, .cb={.callback=unicens_master_switch_cb, .handle=&master_switch}, .info="Sets master playback switch",
-    .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_BOOLEAN, .count=1, .minval=0, .maxval=1, .step=1, .value=1, .name="Master Playback Switch"}
-  },*/
-  { .tag=PCM_Playback_Volume, .cb={.callback=unicens_pcm_vol_cb, .handle=&pcm_volume}, .info="Sets PCM playback volume",
-    .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=6, .minval=0, .maxval=100, .step=1, .value=100, .name="PCM Playback Volume"}
-  },
-  { .tag=EndHalCrlTag}              /* marker for end of the array */
-} ;
-
-/* HAL sound card mapping info */
-STATIC alsaHalSndCardT alsaHalSndCard  = {
-    .name  = ALSA_CARD_NAME,   /*  WARNING: name MUST match with 'aplay -l' */
-    .info  = "HAL for MICROCHIP MOST sound card controlled by UNICENS binding",
-    .ctls  = alsaHalMap,
-    .volumeCB = NULL,               /* use default volume normalization function */
-};
-
-/* initializes ALSA sound card, UNICENS API */
-STATIC int unicens_service_init() {
-    int err = 0;
-    char *config_file = NULL;
-    AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING");
-
-    err = halServiceInit(afbBindingV2.api, &alsaHalSndCard);
-    if (err) {
-        AFB_ERROR("Cannot initialize ALSA soundcard.");
-        goto OnErrorExit;
-    }
-
-    err= afb_daemon_require_api("UNICENS", 1);
-    if (err) {
-        AFB_ERROR("Failed to access UNICENS API");
-        goto OnErrorExit;
-    }
-
-    err = wrap_ucs_getconfig_sync(UCS2_CFG_PATH, &config_file);
-    if (err || (config_file == NULL)) {
-        AFB_ERROR("Failed to retrieve configuration");
-        goto OnErrorExit;
-    }
-    else {
-        AFB_NOTICE("Found configuration: %s", config_file);
-    }
-
-    err = wrap_ucs_subscribe_sync();
-    if (err) {
-        AFB_ERROR("Failed to subscribe to UNICENS binding");
-        goto OnErrorExit;
-    }
-
-    err = wrap_ucs_initialize_sync(config_file);
-    free(config_file);
-    config_file = NULL;
-
-    if (err) {
-        AFB_ERROR("Failed to initialize UNICENS binding");
-        goto OnErrorExit;
-    }
-
-    err = wrap_volume_init();
-    if (err) {
-        AFB_ERROR("Failed to initialize wrapper for volume library");
-        goto OnErrorExit;
-    }
-    
-    /* request of initial card values */
-    /* unicens_request_card_values(ALSA_DEVICE_ID); */
-    
-OnErrorExit:
-    AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING done..");
-    return err;
-}
-
-// This receive all event this binding subscribe to
-PUBLIC void unicens_event_cb(const char *evtname, json_object *j_event) {
-
-    if (strncmp(evtname, "alsacore/", 9) == 0) {
-        halServiceEvent(evtname, j_event);
-        return;
-    }
-
-    if (strncmp(evtname, "UNICENS/", 8) == 0) {
-        //AFB_NOTICE("unicens_event_cb: evtname=%s, event=%s", evtname, json_object_get_string(j_event));
-        if (strcmp(evtname, "UNICENS/node-availibility") == 0) {
-            
-            int node;
-            int available;
-            if (wrap_json_unpack(j_event, "{s:i,s:b}", "node", &node, "available", &available) == 0) {
-                AFB_NOTICE("Node-Availability: node=0x%03X, available=%d", node, available);
-                wrap_volume_node_avail(node, available);
-            }
-        }
-        
-        return;
-    }
-    
-    AFB_NOTICE("unicens_event_cb: UNHANDLED EVENT, evtname=%s, event=%s", evtname, json_object_get_string(j_event));
-}
-
-/* API prefix should be unique for each snd card */
-PUBLIC const struct afb_binding_v2 afbBindingV2 = {
-    .api     = "hal-most-unicens",
-    .init    = unicens_service_init,
-    .verbs   = halServiceApi,
-    .onevent = unicens_event_cb,
-};
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt
deleted file mode 100644
index c734639..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-
-# Define subproject targets
-ADD_SUBDIRECTORY(src)
-
-
-
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h
deleted file mode 100644
index 9fabdb5..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#ifndef DEVICECONTAINER_H
-#define	DEVICECONTAINER_H
-
-#include "device_value.h"
-#include "libmostvolume.h"
-
-class CDeviceContainer {
-
-public:
-    CDeviceContainer();
-    virtual ~CDeviceContainer();
-
-    void AssignService(lib_most_volume_init_t *init_ptr) {_init_ptr = init_ptr;}
-
-    void RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz);
-    void SetValue(uint16_t key, uint8_t value);
-    void ClearValues();
-    void Update();
-    void ChangeNodeAvailable(uint16_t address, bool available);
-
-private:
-    void RequestService(uint16_t timeout);
-    void IncrementProcIndex(void);
-    void HandleI2cResult(uint8_t result);
-    static void OnI2cResult(uint8_t result, void *obj_ptr);
-
-    uint16_t _idx_processing;
-    uint16_t _values_sz;
-    CDeviceValue **_values_pptr;
-    bool _tx_busy;
-    bool _service_requested;
-    lib_most_volume_init_t *_init_ptr;
-};
-
-#endif	/* DEVICECONTAINER_H */
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h
deleted file mode 100644
index bc8f142..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#ifndef DEVICEVALUE_H
-#define	DEVICEVALUE_H
-
-#include <stdint.h>
-#include "libmostvolume.h"
-
-struct SRxMessage {
-    uint32_t devInst;   /*instance if multiple devices are using the same group id*/
-    uint32_t sourceAddr;
-    uint32_t targetAddr;
-    uint32_t nFBlock;
-    uint32_t nInst;
-    uint32_t nFunc;
-    uint32_t nOpType;
-    const uint8_t *pPayload;
-    uint32_t payloadLen;
-};
-
-struct STxMessage {
-    uint32_t devInst;   /*instance if multiple devices are using the same group id*/
-    uint32_t targetAddr;
-    uint32_t nFBlock;
-    uint32_t nInst;
-    uint32_t nFunc;
-    uint32_t nOpType;
-    const uint8_t *pPayload;
-    uint32_t payloadLen;
-};
-
-enum DeviceValueType {
-    DEVICE_VAL_MASTER = 0,
-    DEVICE_VAL_LEFT = 1,
-    DEVICE_VAL_RIGHT = 2
-
-};
-
-class CDeviceValue {
-public:
-    CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key);
-    virtual ~CDeviceValue();
-
-    uint16_t GetKey(){return _key;}
-    DeviceValueType GetType(){return _type;}        // returns the assigned type
-    void SetValue(uint8_t value){_target_value = value;}   // sets desired value
-
-    bool RequiresUpdate();      // returns true if target is not actual value
-                                // returns true if success, false if failed
-                                // -> stop transmission
-    bool FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr,
-                           lib_most_volume_writei2c_result_cb_t result_fptr,
-                           void *result_user_ptr);// fires message & updates actual value
-    
-    void SetAvailable(bool active){this->_is_available = active; _actual_value = 0x01u;}
-    bool IsAvailable() {return this->_is_available;}
-    uint16_t GetAddress() {return this->_address;}
-
-private:
-    void ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[]);
-    void HandleI2cResult(uint8_t result);
-    static void OnI2cResult(uint8_t result, void *obj_ptr);
-
-    bool     _is_available;     // related node is available
-    bool     _is_busy;          // do not update while busy
-    DeviceValueType _type;      // determines the remote i2c command
-    uint16_t _key;              // lookup key
-    uint16_t _address;          // target node/group address
-    uint8_t  _target_value;     // desired value
-    uint8_t  _transmitted_value;// value pending during transmission        
-    uint8_t  _actual_value;     // value set and confirmed via network
-    uint8_t  _tx_payload[20];
-    uint8_t  _tx_payload_sz;
-    
-    lib_most_volume_writei2c_result_cb_t _result_fptr;
-    void *_result_user_ptr;
-};
-
-#endif	/* DEVICEPROPERTY_H */
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h
deleted file mode 100644
index 1147993..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#ifndef LIB_MOST_VOLUME_H
-#define	LIB_MOST_VOLUME_H
-
-#include <stdint.h>
-
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/** Describes the volume control */
-enum lib_most_volume_channel_t{
-    LIB_MOST_VOLUME_CH_FRONT_LEFT   = 0,
-    LIB_MOST_VOLUME_CH_FRONT_RIGHT  = 1,
-    LIB_MOST_VOLUME_CH_REAR_LEFT    = 2,
-    LIB_MOST_VOLUME_CH_REAR_RIGHT   = 3,
-    LIB_MOST_VOLUME_CH_CENTER       = 4,
-    LIB_MOST_VOLUME_CH_SUB          = 5,
-    LIB_MOST_VOLUME_MASTER          = 6
-};
-
-/** Is fired when the application shall call "lib_most_volume_service()" after a certain time
-  * \param timeout  Time in ms after which the application shall call lib_most_volume_service().
-  *                 Valid values:
-  *                 0x0000: as soon as possible,
-  *                 0x0001..0xFFFE: timeout in ms,
-  *                 0xFFFF: never
-  */
-typedef void (*lib_most_volume_service_cb_t)(uint16_t timeout);
-
-typedef void (*lib_most_volume_writei2c_result_cb_t)(uint8_t result, void *user_ptr);
-
-/** Callback function required to write volume changes to network devices
-  * \param node     The node address
-  * \param data_ptr I2C command data
-  * \param data_sz  Size of the I2C command data
-  * \return         Returns \c 0 for success, other value on failure.
-  */
-typedef int (*lib_most_volume_writei2c_cb_t)(uint16_t node, uint8_t *data_ptr, uint8_t data_sz,
-                                            lib_most_volume_writei2c_result_cb_t result_fptr,
-                                            void *result_user_ptr);
-
-typedef struct lib_most_volume_init_ {
-    lib_most_volume_service_cb_t  service_cb;
-    lib_most_volume_writei2c_cb_t writei2c_cb;
-
-} lib_most_volume_init_t;
-
-
-/** Initializes the library
-  * \param   UNICENS_inst       Reference to the UNICENS instance, created by the application.
-  * \param   req_service_fptr   Callback function which is fired if the application shall call
-  *                             lib_most_volume_service.
-  * \return  '0' on success, otherwise value >'0'.
-  */
-extern uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr);
-
-/** Terminates the library
-  * \return  '0' on success, otherwise value >'0'.
-  */
-extern uint8_t lib_most_volume_exit(void);
-
-/** Sets a single volume value.
-  * \param   channel        The volume control to be set.
-  * \param   volume         The volume value to be set. Valid values: 0..255.
-  * \return  '0' on success, otherwise value >'0'.
-  */
-extern uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume);
-
-/** Must be called when the availability of a node has changed
-  * \param   address        The node address
-  * \param   available      Availability: 0 - not available, 1 - available
-  * \return  '0' on success, otherwise value >'0'.
-  */
-extern uint8_t lib_most_volume_node_available(uint16_t address, uint8_t available);
-
-/** Shall be called either cyclically (e.g. 50ms -> polling) or after "timeout"
-  * when "service_fptr" is fired (-> event triggered).
-  * \return  '0' on success, otherwise value >'0'.
-  */
-extern uint8_t lib_most_volume_service(void);
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif	/* LIB_MOST_VOLUME_H */
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h
deleted file mode 100644
index e7cda01..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#ifndef SETUP_H
-#define	SETUP_H
-
-#include "libmostvolume.h"
-#include "device_value.h"
-#include "device_container.h"
-
-#define MAX_CHANNELS    (LIB_MOST_VOLUME_MASTER + 1u)
-#define MAX_MASTERS     3u
-
-class CSetup {
-
-public:
-    void Configure(lib_most_volume_init_t *init_ptr);
-    void SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume);
-    void Update();
-    void SetNodeAvailable(uint16_t address, bool available);
-
-private:
-    CDeviceValue _volume_amp_270_m;
-    CDeviceValue _volume_amp_270_l;
-    CDeviceValue _volume_amp_270_r;
-
-    CDeviceValue _volume_amp_271_m;
-    CDeviceValue _volume_amp_271_l;
-    CDeviceValue _volume_amp_271_r;
-
-    CDeviceValue _volume_amp_272_m;
-    CDeviceValue _volume_amp_272_l;
-    CDeviceValue _volume_amp_272_r;
-
-    CDeviceContainer _value_container;
-    lib_most_volume_init_t init_data;
-
-public:
-    static CSetup* GetInstance();   // singleton
-    static void Release();          // singleton
-
-protected:
-    CSetup();                       // singleton
-    virtual ~CSetup();              // singleton
-
-private:
-    static CSetup* _instance;       // singleton
-};
-
-#endif	/* SETUP_H */
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt
deleted file mode 100644
index 1be7184..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-# Add target to project dependency list
-PROJECT_TARGET_ADD(ucs2-volume)
-
-# Define targets source files
-ADD_LIBRARY(${TARGET_NAME} STATIC device_container.cpp  device_value.cpp  libmostvolume.cpp  setup.cpp)
-
-    # Library properties
-    SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES
-        OUTPUT_NAME ${TARGET_NAME}
-    )
-
-    # Library dependencies from PKG_REQUIRED_LIST
-    #TARGET_LINK_LIBRARIES(ucs2-volume     # Library dependencies (include updates automatically)
-    #    ${link_libraries}
-    #)
-
-    # Define properties to expose when others use this target
-    TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME}
-       PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/../inc
-    )
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp
deleted file mode 100644
index f8b1961..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#include <stddef.h>
-#include "device_container.h"
-
-#define DEVCONT_TIME_RETRIGGER      (uint16_t)30U
-#define DEVCONT_TIME_NOW            (uint16_t)0U
-#define DEVCONT_TIME_STOP           (uint16_t)0xFFFFU
-
-#define DEVCONT_UNUSED(a)     (a = a)
-
-CDeviceContainer::CDeviceContainer()
-{
-    this->_idx_processing = 0U;
-    this->_values_pptr = NULL;
-    this->_values_sz = 0U;
-    this->_tx_busy = false;
-    this->_service_requested = false;
-    this->_init_ptr = NULL;
-}
-
-CDeviceContainer::~CDeviceContainer()
-{
-    /*Clb_RegisterI2CResultCB(NULL, NULL);*/    /* avoid that the result callback is fired after object is destroyed */
-}
-
-void CDeviceContainer::RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz)
-{
-    this->_idx_processing = 0U;
-    this->_values_pptr = list_pptr;
-    this->_values_sz = list_sz;
-    this->_tx_busy = false;
-
-    if ((list_pptr != NULL) && (list_sz > 0U))
-    {
-        this->_idx_processing = (uint16_t)(list_sz - 1U);
-    }
-}
-
-void CDeviceContainer::ClearValues()
-{
-    this->_idx_processing = 0U;
-    this->_values_pptr = NULL;
-    this->_values_sz = 0U;
-    this->_tx_busy = false;
-}
-
-void CDeviceContainer::SetValue(uint16_t key, uint8_t value)
-{
-     uint16_t idx;
-     bool req_update = false;
-
-     for (idx = 0U; idx < this->_values_sz; idx++)
-     {
-         if (this->_values_pptr[idx]->GetKey() == key)
-         {
-            this->_values_pptr[idx]->SetValue(value);
-            if (this->_values_pptr[idx]->RequiresUpdate())
-            {
-                req_update = true;
-            }
-         }
-     }
-
-    if (req_update && (!this->_tx_busy))
-    {
-        RequestService(DEVCONT_TIME_NOW); //fire callback
-    }
-}
-
-void CDeviceContainer::IncrementProcIndex(void)
-{
-    if ((_idx_processing + 1U) >=  this->_values_sz)
-    {
-        _idx_processing = 0U;
-    }
-    else
-    {
-        _idx_processing++;
-    }
-}
-
-// starts at latest position, searches next value to update, waits until response
-void CDeviceContainer::Update()
-{
-    uint16_t cnt;
-    bool error = false;
-    _service_requested = false;
-
-    if (this->_tx_busy)
-    {
-        return;
-    }
-
-    for (cnt = 0u; cnt < this->_values_sz; cnt++)   /* just run one cycle */
-    {
-        IncrementProcIndex();
-
-        if (_values_pptr[_idx_processing]->RequiresUpdate())
-        {
-            if (_values_pptr[_idx_processing]->FireUpdateMessage(this->_init_ptr->writei2c_cb,
-                                                                 &OnI2cResult,
-                                                                 this))
-            {
-                this->_tx_busy = true;
-                error = false;
-                break;
-            }
-            else
-            {
-                error = true;
-                break;
-            }
-        }
-    }
-
-    if (error)
-    {
-        RequestService(DEVCONT_TIME_RETRIGGER);
-    }
-}
-
-void CDeviceContainer::HandleI2cResult(uint8_t result)
-{
-    this->_tx_busy = false;
-    if (result == 0)
-        this->RequestService(DEVCONT_TIME_NOW);
-    else
-        this->RequestService(DEVCONT_TIME_RETRIGGER);
-}
-
-void CDeviceContainer::OnI2cResult(uint8_t result, void *obj_ptr)
-{
-    ((CDeviceContainer*)obj_ptr)->HandleI2cResult(result);
-}
-
-void CDeviceContainer::RequestService(uint16_t timeout)
-{
-    if (!_service_requested)
-    {
-        _service_requested = true;
-
-        if (this->_init_ptr && this->_init_ptr->service_cb)
-        {
-            this->_init_ptr->service_cb(timeout);
-        }
-    }
-}
-
-void CDeviceContainer::ChangeNodeAvailable(uint16_t address, bool available)
-{
-    uint16_t idx;
-    
-    for (idx = 0U; idx < this->_values_sz; idx++)
-    {
-        if (this->_values_pptr[idx]->GetAddress() == address)
-        {
-            this->_values_pptr[idx]->SetAvailable(available);
-        }
-    }
-    
-    if (available)
-    {
-        RequestService(DEVCONT_TIME_RETRIGGER);
-    }
-}
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp
deleted file mode 100644
index 7103192..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-#include <stddef.h>
-#include "device_value.h"
-#include "setup.h"
-
-#define MUTE_VALUE      0x03FFU
-#define MUTE_VALUE_HB   0x03U
-#define MUTE_VALUE_LB   0xFFU
-
-#define CONTROL_MASTER  0x07U
-#define CONTROL_CH_1    0x08U
-#define CONTROL_CH_2    0x09U
-
-CDeviceValue::CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key)
-{
-    this->_is_available = false;
-    this->_is_busy = false;
-    this->_address = address;
-    this->_target_value = 0x01u;
-    this->_actual_value = 0x01u;
-    
-    this->_result_fptr = NULL;
-    this->_result_user_ptr = NULL;
-
-    this->_type = type;
-    this->_key = key;
-
-    _tx_payload[0] = CONTROL_MASTER;// 7: master, 8: channel 1, 9: Channel 2
-    _tx_payload[1] = MUTE_VALUE_HB; //HB:Volume
-    _tx_payload[2] = MUTE_VALUE_LB; //LB:Volume
-    _tx_payload_sz = 3u;
-}
-
-CDeviceValue::~CDeviceValue()
-{
-}
-
-void CDeviceValue::ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[])
-{
-    uint16_t tmp = MUTE_VALUE;
-
-    switch (type)
-    {
-        case DEVICE_VAL_LEFT:
-            tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU)));
-            //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF));
-            //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF));
-            tx_payload[0] = CONTROL_CH_1;
-            break;
-        case DEVICE_VAL_RIGHT:
-            tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU)));
-            //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF));
-            //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF));
-            tx_payload[0] = CONTROL_CH_2;
-            break;
-        default:
-            /*std::cerr << "CDeviceValue::ApplyMostValue() error matching incorrect" << std::endl;*/
-        case DEVICE_VAL_MASTER:
-            tmp = (uint16_t)(0x100U + 0x2FFU - (0x2FFU * ((int32_t)value) / (0xFFU)));
-            tx_payload[0] = CONTROL_MASTER;
-            break;
-    }
-
-    tx_payload[1] = (uint8_t)((tmp >> 8U) & (uint16_t)0xFFU); //HB:Volume
-    tx_payload[2] = (uint8_t)(tmp  & (uint16_t)0xFFU); //LB:Volume
-}
-
-// returns true if target is not actual value
-bool CDeviceValue::RequiresUpdate()
-{
-    if (this->_is_available && !this->_is_busy && (this->_target_value != this->_actual_value))
-    {
-        return true;
-    }
-
-    return false;
-}
-
-bool CDeviceValue::FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr,
-                                     lib_most_volume_writei2c_result_cb_t result_fptr,
-                                     void *result_user_ptr)
-{
-    int ret = -1;
-    ApplyMostValue(this->_target_value, _type, _tx_payload);
-
-    if (this->_is_available && !this->_is_busy)
-    {
-        ret = writei2c_fptr(this->_address, &_tx_payload[0], _tx_payload_sz, 
-                            &OnI2cResult,
-                            this);
-        
-        if (ret == 0)
-        {
-            this->_transmitted_value = this->_target_value;
-            this->_is_busy = true;
-            this->_result_fptr = result_fptr;
-            this->_result_user_ptr = result_user_ptr;
-            return true;
-        }
-    }
-
-    return false;
-}
-
-void CDeviceValue::HandleI2cResult(uint8_t result)
-{
-    if (result == 0)
-    {
-        /* transmission succeeded - now apply transmitted value */
-        this->_actual_value = this->_transmitted_value;
-    }
-    
-    if (this->_result_fptr)
-    {
-        /* notify container */
-        this->_result_fptr(result, this->_result_user_ptr);
-    }
-    
-    this->_result_fptr = NULL;
-    this->_result_user_ptr = NULL;
-    this->_is_busy = false;
-}
-
-void CDeviceValue::OnI2cResult(uint8_t result, void *obj_ptr)
-{
-    ((CDeviceValue*)obj_ptr)->HandleI2cResult(result);
-}
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp
deleted file mode 100644
index 5eea3fd..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-
-#include "libmostvolume.h"
-#include "setup.h"
-/*#include <iostream>*/
-
-static bool _running = false;
-
-extern "C" uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr)
-{
-    uint8_t success = 1U;
-    /*std::cerr << "lib_most_volume_init(): called" << std::endl;*/
-
-    if (!_running && init_ptr)
-    {
-        CSetup::GetInstance()->Configure(init_ptr);
-        success = 0U;
-        _running = true;
-    }
-
-    return success;
-}
-
-extern "C" uint8_t lib_most_volume_exit(void)
-{
-    uint8_t success = 1U;
-    /*std::cerr << "lib_most_volume_exit(): called" << std::endl;*/
-
-    if (_running)
-    {
-        CSetup::Release();
-        success = 0U;
-        _running = false;
-    }
-
-    return success;
-}
-
-extern "C" uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume)
-{
-    uint8_t success = 1U;
-    /*std::cerr << "lib_most_volume_set(): channel=" << channel << ", volume=" << (int)volume << std::endl;*/
-
-    if (_running)
-    {
-        CSetup::GetInstance()->SetVolume(channel, volume);
-        success = 0U;
-    }
-
-    return success;
-}
-
-extern uint8_t lib_most_volume_node_available(uint16_t address, uint8_t available)
-{
-    uint8_t success = 1U;
-    
-    if (_running)
-    {
-        CSetup::GetInstance()->SetNodeAvailable(address, available);
-        success = 0U;
-    } 
-    
-    return success;
-}
-
-extern "C" uint8_t lib_most_volume_service(void)
-{
-    uint8_t success = 1U;
-    /*std::cerr << "lib_most_volume_service(): called" << std::endl;*/
-
-    if (_running)
-    {
-        CSetup::GetInstance()->Update();
-        success = 0U;
-    }
-
-    return success;
-}
diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp
deleted file mode 100644
index dd6675b..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * libmostvolume example
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
-#include <stddef.h>
-#include "setup.h"
-
-CSetup* CSetup::_instance = NULL;
-
-// singleton
-CSetup* CSetup::GetInstance() {
-    if (_instance == NULL) {
-        _instance = new CSetup();
-    }
-
-    return _instance;
-}
-
-// singleton
-void CSetup::Release() {
-    if (_instance != NULL) {
-        delete _instance;
-    }
-    _instance = NULL;
-}
-
-CSetup::CSetup()
-    :   _volume_amp_270_m(0x270U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER),
-        _volume_amp_270_l(0x270U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_FRONT_LEFT),
-        _volume_amp_270_r(0x270U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_FRONT_RIGHT),
-        _volume_amp_271_m(0x271U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER),
-        _volume_amp_271_l(0x271U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_REAR_LEFT),
-        _volume_amp_271_r(0x271U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_REAR_RIGHT),
-        _volume_amp_272_m(0x272U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER),
-        _volume_amp_272_l(0x272U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_CENTER),
-        _volume_amp_272_r(0x272U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_SUB),
-        _value_container()
-{
-    static CDeviceValue* value_list[9] = {  &_volume_amp_270_m,
-                                            &_volume_amp_270_l,
-                                            &_volume_amp_270_r,
-                                            &_volume_amp_271_m,
-                                            &_volume_amp_271_l,
-                                            &_volume_amp_271_r,
-                                            &_volume_amp_272_m,
-                                            &_volume_amp_272_l,
-                                            &_volume_amp_272_r};
-
-    _value_container.RegisterValues(value_list, 9U);
-}
-
-CSetup::~CSetup()
-{
-
-}
-
-void CSetup::Configure(lib_most_volume_init_t *init_ptr)
-{
-    this->init_data = *init_ptr;
-    _value_container.AssignService(&this->init_data);
-}
-
-void CSetup::SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume)
-{
-    _value_container.SetValue((uint16_t)channel, volume);
-}
-
-void CSetup::Update()
-{
-    _value_container.Update();
-}
-
-void CSetup::SetNodeAvailable(uint16_t address, bool available)
-{
-    _value_container.ChangeNodeAvailable(address, available);
-}
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.c b/HAL-afb/HAL_MOST_UNICENS/wrap-json.c
deleted file mode 100644
index 987a008..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap-json.c
+++ /dev/null
@@ -1,940 +0,0 @@
-/*

- Copyright (C) 2016, 2017 "IoT.bzh"

-

- author: José Bollo <jose.bollo@iot.bzh>

-

- Licensed under the Apache License, Version 2.0 (the "License");

- you may not use this file except in compliance with the License.

- You may obtain a copy of the License at

-

-     http://www.apache.org/licenses/LICENSE-2.0

-

- Unless required by applicable law or agreed to in writing, software

- distributed under the License is distributed on an "AS IS" BASIS,

- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

- See the License for the specific language governing permissions and

- limitations under the License.

-*/

-

-#include <string.h>

-

-#include "wrap-json.h"

-

-#define STACKCOUNT  32

-#define STRCOUNT    8

-

-enum {

-	wrap_json_error_none,

-	wrap_json_error_null_object,

-	wrap_json_error_truncated,

-	wrap_json_error_internal_error,

-	wrap_json_error_out_of_memory,

-	wrap_json_error_invalid_character,

-	wrap_json_error_too_long,

-	wrap_json_error_too_deep,

-	wrap_json_error_null_spec,

-	wrap_json_error_null_key,

-	wrap_json_error_null_string,

-	wrap_json_error_out_of_range,

-	wrap_json_error_incomplete,

-	wrap_json_error_missfit_type,

-	wrap_json_error_key_not_found,

-	_wrap_json_error_count_

-};

-

-static const char ignore_all[] = " \t\n\r,:";

-static const char pack_accept_arr[] = "][{snbiIfoO";

-static const char pack_accept_key[] = "s}";

-#define pack_accept_any (&pack_accept_arr[1])

-

-static const char unpack_accept_arr[] = "*!][{snbiIfFoO";

-static const char unpack_accept_key[] = "*!s}";

-#define unpack_accept_any (&unpack_accept_arr[3])

-

-static const char *pack_errors[_wrap_json_error_count_] =

-{

-	[wrap_json_error_none] = "unknown error",

-	[wrap_json_error_null_object] = "null object",

-	[wrap_json_error_truncated] = "truncated",

-	[wrap_json_error_internal_error] = "internal error",

-	[wrap_json_error_out_of_memory] = "out of memory",

-	[wrap_json_error_invalid_character] = "invalid character",

-	[wrap_json_error_too_long] = "too long",

-	[wrap_json_error_too_deep] = "too deep",

-	[wrap_json_error_null_spec] = "spec is NULL",

-	[wrap_json_error_null_key] = "key is NULL",

-	[wrap_json_error_null_string] = "string is NULL",

-	[wrap_json_error_out_of_range] = "array too small",

-	[wrap_json_error_incomplete] = "incomplete container",

-	[wrap_json_error_missfit_type] = "missfit of type",

-	[wrap_json_error_key_not_found] = "key not found"

-};

-

-int wrap_json_get_error_position(int rc)

-{

-	if (rc < 0)

-		rc = -rc;

-	return (rc >> 4) + 1;

-}

-

-int wrap_json_get_error_code(int rc)

-{

-	if (rc < 0)

-		rc = -rc;

-	return rc & 15;

-}

-

-const char *wrap_json_get_error_string(int rc)

-{

-	rc = wrap_json_get_error_code(rc);

-	if (rc >= sizeof pack_errors / sizeof *pack_errors)

-		rc = 0;

-	return pack_errors[rc];

-}

-

-

-

-static inline const char *skip(const char *d)

-{

-	while (*d && strchr(ignore_all, *d))

-		d++;

-	return d;

-}

-

-int wrap_json_vpack(struct json_object **result, const char *desc, va_list args)

-{

-	/* TODO: the case of structs with key being single char should be optimized */

-	int nstr, notnull, nullable, rc;

-	size_t sz, dsz, ssz;

-	char *s;

-	char c;

-	const char *d;

-	char buffer[256];

-	struct { const char *str; size_t sz; } strs[STRCOUNT];

-	struct { struct json_object *cont, *key; const char *acc; char type; } stack[STACKCOUNT], *top;

-	struct json_object *obj;

-

-	ssz = sizeof buffer;

-	s = buffer;

-	top = stack;

-	top->key = NULL;

-	top->cont = NULL;

-	top->acc = pack_accept_any;

-	top->type = 0;

-	d = desc;

-	if (!d)

-		goto null_spec;

-	d = skip(d);

-	for(;;) {

-		c = *d;

-		if (!c)

-			goto truncated;

-		if (!strchr(top->acc, c))

-			goto invalid_character;

-		d = skip(++d);

-		switch(c) {

-		case 's':

-			nullable = 0;

-			notnull = 0;

-			nstr = 0;

-			sz = 0;

-			for (;;) {

-				strs[nstr].str = va_arg(args, const char*);

-				if (strs[nstr].str)

-					notnull = 1;

-				if (*d == '?') {

-					d = skip(++d);

-					nullable = 1;

-				}

-				switch(*d) {

-				case '%': strs[nstr].sz = va_arg(args, size_t); d = skip(++d); break;

-				case '#': strs[nstr].sz = (size_t)va_arg(args, int); d = skip(++d); break;

-				default: strs[nstr].sz = strs[nstr].str ? strlen(strs[nstr].str) : 0; break;

-				}

-				sz += strs[nstr++].sz;

-				if (*d == '?') {

-					d = skip(++d);

-					nullable = 1;

-				}

-				if (*d != '+')

-					break;

-				if (nstr >= STRCOUNT)

-					goto too_long;

-				d = skip(++d);

-			}

-			if (*d == '*')

-				nullable = 1;

-			if (notnull) {

-				if (sz > ssz) {

-					ssz += ssz;

-					if (ssz < sz)

-						ssz = sz;

-					s = alloca(sz);

-				}

-				dsz = sz;

-				while (nstr) {

-					nstr--;

-					dsz -= strs[nstr].sz;

-					memcpy(&s[dsz], strs[nstr].str, strs[nstr].sz);

-				}

-				obj = json_object_new_string_len(s, (int)sz);

-				if (!obj)

-					goto out_of_memory;

-			} else if (nullable)

-				obj = NULL;

-			else

-				goto null_string;

-			break;

-		case 'n':

-			obj = NULL;

-			break;

-		case 'b':

-			obj = json_object_new_boolean(va_arg(args, int));

-			if (!obj)

-				goto out_of_memory;

-			break;

-		case 'i':

-			obj = json_object_new_int(va_arg(args, int));

-			if (!obj)

-				goto out_of_memory;

-			break;

-		case 'I':

-			obj = json_object_new_int64(va_arg(args, int64_t));

-			if (!obj)

-				goto out_of_memory;

-			break;

-		case 'f':

-			obj = json_object_new_double(va_arg(args, double));

-			if (!obj)

-				goto out_of_memory;

-			break;

-		case 'o':

-		case 'O':

-			obj = va_arg(args, struct json_object*);

-			if (*d == '?')

-				d = skip(++d);

-			else if (*d != '*' && !obj)

-				goto null_object;

-			if (c == 'O')

-				json_object_get(obj);

-			break;

-		case '[':

-		case '{':

-			if (++top >= &stack[STACKCOUNT])

-				goto too_deep;

-			top->key = NULL;

-			if (c == '[') {

-				top->type = ']';

-				top->acc = pack_accept_arr;

-				top->cont = json_object_new_array();

-			} else {

-				top->type = '}';

-				top->acc = pack_accept_key;

-				top->cont = json_object_new_object();

-			}

-			if (!top->cont)

-				goto out_of_memory;

-			continue;

-		case '}':

-		case ']':

-			if (c != top->type || top <= stack)

-				goto internal_error;

-			obj = (top--)->cont;

-			if (*d == '*' && !(c == '}' ? json_object_object_length(obj) : json_object_array_length(obj))) {

-				json_object_put(obj);

-				obj = NULL;

-			}

-			break;

-		default:

-			goto internal_error;

-		}

-		switch (top->type) {

-		case 0:

-			if (top != stack)

-				goto internal_error;

-			if (*d)

-				goto invalid_character;

-			*result = obj;

-			return 0;

-		case ']':

-			if (obj || *d != '*')

-				json_object_array_add(top->cont, obj);

-			if (*d == '*')

-				d = skip(++d);

-			break;

-		case '}':

-			if (!obj)

-				goto null_key;

-			top->key = obj;

-			top->acc = pack_accept_any;

-			top->type = ':';

-			break;

-		case ':':

-			if (obj || *d != '*')

-				json_object_object_add(top->cont, json_object_get_string(top->key), obj);

-			if (*d == '*')

-				d = skip(++d);

-			json_object_put(top->key);

-			top->key = NULL;

-			top->acc = pack_accept_key;

-			top->type = '}';

-			break;

-		default:

-			goto internal_error;

-		}

-	}

-

-null_object:

-	rc = wrap_json_error_null_object;

-	goto error;

-truncated:

-	rc = wrap_json_error_truncated;

-	goto error;

-internal_error:

-	rc = wrap_json_error_internal_error;

-	goto error;

-out_of_memory:

-	rc = wrap_json_error_out_of_memory;

-	goto error;

-invalid_character:

-	rc = wrap_json_error_invalid_character;

-	goto error;

-too_long:

-	rc = wrap_json_error_too_long;

-	goto error;

-too_deep:

-	rc = wrap_json_error_too_deep;

-	goto error;

-null_spec:

-	rc = wrap_json_error_null_spec;

-	goto error;

-null_key:

-	rc = wrap_json_error_null_key;

-	goto error;

-null_string:

-	rc = wrap_json_error_null_string;

-	goto error;

-error:

-	do {

-		json_object_put(top->key);

-		json_object_put(top->cont);

-	} while (--top >= stack);

-	*result = NULL;

-	rc = rc | (int)((d - desc) << 4);

-	return -rc;

-}

-

-int wrap_json_pack(struct json_object **result, const char *desc, ...)

-{

-	int rc;

-	va_list args;

-

-	va_start(args, desc);

-	rc = wrap_json_vpack(result, desc, args);

-	va_end(args);

-	return rc;

-}

-

-static int vunpack(struct json_object *object, const char *desc, va_list args, int store)

-{

-	int rc = 0, optionnal, ignore;

-	char c, xacc[2] = { 0, 0 };

-	const char *acc;

-	const char *d, *fit = NULL;

-	const char *key = NULL;

-	const char **ps = NULL;

-	double *pf = NULL;

-	int *pi = NULL;

-	int64_t *pI = NULL;

-	size_t *pz = NULL;

-	struct { struct json_object *parent; const char *acc; int index, count; char type; } stack[STACKCOUNT], *top;

-	struct json_object *obj;

-	struct json_object **po;

-

-	xacc[0] = 0;

-	ignore = 0;

-	top = NULL;

-	acc = unpack_accept_any;

-	d = desc;

-	if (!d)

-		goto null_spec;

-	d = skip(d);

-	obj = object;

-	for(;;) {

-		fit = d;

-		c = *d;

-		if (!c)

-			goto truncated;

-		if (!strchr(acc, c))

-			goto invalid_character;

-		d = skip(++d);

-		switch(c) {

-		case 's':

-			if (xacc[0] == '}') {

-				/* expects a key */

-				key = va_arg(args, const char *);

-				if (!key)

-					goto null_key;

-				if (*d != '?')

-					optionnal = 0;

-				else {

-					optionnal = 1;

-					d = skip(++d);

-				}

-				if (ignore)

-					ignore++;

-				else {

-					if (json_object_object_get_ex(top->parent, key, &obj)) {

-						/* found */

-						top->index++;

-					} else {

-						/* not found */

-						if (!optionnal)

-							goto key_not_found;

-						ignore = 1;

-						obj = NULL;

-					}

-				}

-				xacc[0] = ':';

-				acc = unpack_accept_any;

-				continue;

-			}

-			/* get a string */

-			if (store)

-				ps = va_arg(args, const char **);

-			if (!ignore) {

-				if (!json_object_is_type(obj, json_type_string))

-					goto missfit;

-				if (store && ps)

-					*ps = json_object_get_string(obj);

-			}

-			if (*d == '%') {

-				d = skip(++d);

-				if (store) {

-					pz = va_arg(args, size_t *);

-					if (!ignore && pz)

-						*pz = (size_t)json_object_get_string_len(obj);

-				}

-			}

-			break;

-		case 'n':

-			if (!ignore && !json_object_is_type(obj, json_type_null))

-				goto missfit;

-			break;

-		case 'b':

-			if (store)

-				pi = va_arg(args, int *);

-

-			if (!ignore) {

-				if (!json_object_is_type(obj, json_type_boolean))

-					goto missfit;

-				if (store && pi)

-					*pi = json_object_get_boolean(obj);

-			}

-			break;

-		case 'i':

-			if (store)

-				pi = va_arg(args, int *);

-

-			if (!ignore) {

-				if (!json_object_is_type(obj, json_type_int))

-					goto missfit;

-				if (store && pi)

-					*pi = json_object_get_int(obj);

-			}

-			break;

-		case 'I':

-			if (store)

-				pI = va_arg(args, int64_t *);

-

-			if (!ignore) {

-				if (!json_object_is_type(obj, json_type_int))

-					goto missfit;

-				if (store && pI)

-					*pI = json_object_get_int64(obj);

-			}

-			break;

-		case 'f':

-		case 'F':

-			if (store)

-				pf = va_arg(args, double *);

-

-			if (!ignore) {

-				if (!(json_object_is_type(obj, json_type_double) || (c == 'F' && json_object_is_type(obj, json_type_int))))

-					goto missfit;

-				if (store && pf)

-					*pf = json_object_get_double(obj);

-			}

-			break;

-		case 'o':

-		case 'O':

-			if (store) {

-				po = va_arg(args, struct json_object **);

-				if (!ignore && po) {

-					if (c == 'O')

-						obj = json_object_get(obj);

-					*po = obj;

-				}

-			}

-			break;

-

-		case '[':

-		case '{':

-			if (!top)

-				top = stack;

-			else if (++top  >= &stack[STACKCOUNT])

-				goto too_deep;

-

-			top->acc = acc;

-			top->type = xacc[0];

-			top->index = 0;

-			top->parent = obj;

-			if (ignore)

-				ignore++;

-			if (c == '[') {

-				if (!ignore) {

-					if (!json_object_is_type(obj, json_type_array))

-						goto missfit;

-					top->count = json_object_array_length(obj);

-				}

-				xacc[0] = ']';

-				acc = unpack_accept_arr;

-			} else {

-				if (!ignore) {

-					if (!json_object_is_type(obj, json_type_object))

-						goto missfit;

-					top->count = json_object_object_length(obj);

-				}

-				xacc[0] = '}';

-				acc = unpack_accept_key;

-				continue;

-			}

-			break;

-		case '}':

-		case ']':

-			if (!top || c != xacc[0])

-				goto internal_error;

-			acc = top->acc;

-			xacc[0] = top->type;

-			top = top == stack ? NULL : top - 1;

-			if (ignore)

-				ignore--;

-			break;

-		case '!':

-			if (*d != xacc[0])

-				goto invalid_character;

-			if (!ignore && top->index != top->count)

-				goto incomplete;

-			/*@fallthrough@*/

-		case '*':

-			acc = xacc;

-			continue;

-		default:

-			goto internal_error;

-		}

-		switch (xacc[0]) {

-		case 0:

-			if (top)

-				goto internal_error;

-			if (*d)

-				goto invalid_character;

-			return 0;

-		case ']':

-			if (!ignore) {

-				key = strchr(unpack_accept_arr, *d);

-				if (key && key >= unpack_accept_any) {

-					if (top->index >= top->count)

-						goto out_of_range;

-					obj = json_object_array_get_idx(top->parent, top->index++);

-				}

-			}

-			break;

-		case ':':

-			acc = unpack_accept_key;

-			xacc[0] = '}';

-			if (ignore)

-				ignore--;

-			break;

-		default:

-			goto internal_error;

-		}

-	}

-truncated:

-	rc = wrap_json_error_truncated;

-	goto error;

-internal_error:

-	rc = wrap_json_error_internal_error;

-	goto error;

-invalid_character:

-	rc = wrap_json_error_invalid_character;

-	goto error;

-too_deep:

-	rc = wrap_json_error_too_deep;

-	goto error;

-null_spec:

-	rc = wrap_json_error_null_spec;

-	goto error;

-null_key:

-	rc = wrap_json_error_null_key;

-	goto error;

-out_of_range:

-	rc = wrap_json_error_out_of_range;

-	goto error;

-incomplete:

-	rc = wrap_json_error_incomplete;

-	goto error;

-missfit:

-	rc = wrap_json_error_missfit_type;

-	goto errorfit;

-key_not_found:

-	rc = wrap_json_error_key_not_found;

-	goto error;

-errorfit:

-	d = fit;

-error:

-	rc = rc | (int)((d - desc) << 4);

-	return -rc;

-}

-

-int wrap_json_vcheck(struct json_object *object, const char *desc, va_list args)

-{

-	return vunpack(object, desc, args, 0);

-}

-

-int wrap_json_check(struct json_object *object, const char *desc, ...)

-{

-	int rc;

-	va_list args;

-

-	va_start(args, desc);

-	rc = vunpack(object, desc, args, 0);

-	va_end(args);

-	return rc;

-}

-

-int wrap_json_vmatch(struct json_object *object, const char *desc, va_list args)

-{

-	return !vunpack(object, desc, args, 0);

-}

-

-int wrap_json_match(struct json_object *object, const char *desc, ...)

-{

-	int rc;

-	va_list args;

-

-	va_start(args, desc);

-	rc = vunpack(object, desc, args, 0);

-	va_end(args);

-	return !rc;

-}

-

-int wrap_json_vunpack(struct json_object *object, const char *desc, va_list args)

-{

-	return vunpack(object, desc, args, 1);

-}

-

-int wrap_json_unpack(struct json_object *object, const char *desc, ...)

-{

-	int rc;

-	va_list args;

-

-	va_start(args, desc);

-	rc = vunpack(object, desc, args, 1);

-	va_end(args);

-	return rc;

-}

-

-static void object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)

-{

-	struct json_object_iterator it = json_object_iter_begin(object);

-	struct json_object_iterator end = json_object_iter_end(object);

-	while (!json_object_iter_equal(&it, &end)) {

-		callback(closure, json_object_iter_peek_value(&it), json_object_iter_peek_name(&it));

-		json_object_iter_next(&it);

-	}

-}

-

-static void array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)

-{

-	int n = json_object_array_length(object);

-	int i = 0;

-	while(i < n)

-		callback(closure, json_object_array_get_idx(object, i++));

-}

-

-void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)

-{

-	if (json_object_is_type(object, json_type_array))

-		array_for_all(object, callback, closure);

-	else

-		callback(closure, object);

-}

-

-void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)

-{

-	if (json_object_is_type(object, json_type_array))

-		array_for_all(object, callback, closure);

-}

-

-void wrap_json_object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)

-{

-	if (json_object_is_type(object, json_type_object))

-		object_for_all(object, callback, closure);

-}

-

-void wrap_json_optobject_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)

-{

-	if (json_object_is_type(object, json_type_object))

-		object_for_all(object, callback, closure);

-	else

-		callback(closure, object, NULL);

-}

-

-void wrap_json_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)

-{

-	if (!object)

-		/* do nothing */;

-	else if (json_object_is_type(object, json_type_object))

-		object_for_all(object, callback, closure);

-	else if (!json_object_is_type(object, json_type_array))

-		callback(closure, object, NULL);

-	else {

-		int n = json_object_array_length(object);

-		int i = 0;

-		while(i < n)

-			callback(closure, json_object_array_get_idx(object, i++), NULL);

-	}

-}

-

-#if defined(WRAP_JSON_TEST)

-#include <stdio.h>

-

-void p(const char *desc, ...)

-{

-	int rc;

-	va_list args;

-	struct json_object *result;

-

-	va_start(args, desc);

-	rc = wrap_json_vpack(&result, desc, args);

-	va_end(args);

-	if (!rc) 

-		printf("  SUCCESS %s\n\n", json_object_to_json_string(result));

-	else

-		printf("  ERROR[char %d err %d] %s\n\n", wrap_json_get_error_position(rc), wrap_json_get_error_code(rc), wrap_json_get_error_string(rc));

-	json_object_put(result);

-}

-

-const char *xs[10];

-int *xi[10];

-int64_t *xI[10];

-double *xf[10];

-struct json_object *xo[10];

-size_t xz[10];

-

-void u(const char *value, const char *desc, ...)

-{

-	unsigned m, k;

-	int rc;

-	va_list args;

-	struct json_object *obj, *o;

-

-	memset(xs, 0, sizeof xs);

-	memset(xi, 0, sizeof xi);

-	memset(xI, 0, sizeof xI);

-	memset(xf, 0, sizeof xf);

-	memset(xo, 0, sizeof xo);

-	memset(xz, 0, sizeof xz);

-	obj = json_tokener_parse(value);

-	va_start(args, desc);

-	rc = wrap_json_vunpack(obj, desc, args);

-	va_end(args);

-	if (rc) 

-		printf("  ERROR[char %d err %d] %s\n\n", wrap_json_get_error_position(rc), wrap_json_get_error_code(rc), wrap_json_get_error_string(rc));

-	else {

-		value = NULL;

-		printf("  SUCCESS");

-		va_start(args, desc);

-		k = m = 0;

-		while(*desc) {

-			switch(*desc) {

-			case '{': m = (m << 1) | 1; k = 1; break;

-			case '}': m = m >> 1; k = m&1; break;

-			case '[': m = m << 1; k = 0; break;

-			case ']': m = m >> 1; k = m&1; break;

-			case 's': printf(" s:%s", k ? va_arg(args, const char*) : *(va_arg(args, const char**)?:&value)); k ^= m&1; break;

-			case '%': printf(" %%:%zu", *va_arg(args, size_t*)); k = m&1; break;

-			case 'n': printf(" n"); k = m&1; break;

-			case 'b': printf(" b:%d", *va_arg(args, int*)); k = m&1; break;

-			case 'i': printf(" i:%d", *va_arg(args, int*)); k = m&1; break;

-			case 'I': printf(" I:%lld", *va_arg(args, int64_t*)); k = m&1; break;

-			case 'f': printf(" f:%f", *va_arg(args, double*)); k = m&1; break;

-			case 'F': printf(" F:%f", *va_arg(args, double*)); k = m&1; break;

-			case 'o': printf(" o:%s", json_object_to_json_string(*va_arg(args, struct json_object**))); k = m&1; break;

-			case 'O': o = *va_arg(args, struct json_object**); printf(" O:%s", json_object_to_json_string(o)); json_object_put(o); k = m&1; break;

-			default: break;

-			}

-			desc++;

-		}

-		va_end(args);

-		printf("\n\n");

-	}

-	json_object_put(obj);

-}

-

-#define P(...) do{ printf("pack(%s)\n",#__VA_ARGS__); p(__VA_ARGS__); } while(0)

-#define U(...) do{ printf("unpack(%s)\n",#__VA_ARGS__); u(__VA_ARGS__); } while(0)

-

-int main()

-{

-	char buffer[4] = {'t', 'e', 's', 't'};

-

-	P("n");

-	P("b", 1);

-	P("b", 0);

-	P("i", 1);

-	P("I", (uint64_t)0x123456789abcdef);

-	P("f", 3.14);

-	P("s", "test");

-	P("s?", "test");

-	P("s?", NULL);

-	P("s#", "test asdf", 4);

-	P("s%", "test asdf", (size_t)4);

-	P("s#", buffer, 4);

-	P("s%", buffer, (size_t)4);

-	P("s++", "te", "st", "ing");

-	P("s#+#+", "test", 1, "test", 2, "test");

-	P("s%+%+", "test", (size_t)1, "test", (size_t)2, "test");

-	P("{}", 1.0);

-	P("[]", 1.0);

-	P("o", json_object_new_int(1));

-	P("o?", json_object_new_int(1));

-	P("o?", NULL);

-	P("O", json_object_new_int(1));

-	P("O?", json_object_new_int(1));

-	P("O?", NULL);

-	P("{s:[]}", "foo");

-	P("{s+#+: []}", "foo", "barbar", 3, "baz");

-	P("{s:s,s:o,s:O}", "a", NULL, "b", NULL, "c", NULL);

-	P("{s:**}", "a", NULL);

-	P("{s:s*,s:o*,s:O*}", "a", NULL, "b", NULL, "c", NULL);

-	P("[i,i,i]", 0, 1, 2);

-	P("[s,o,O]", NULL, NULL, NULL);

-	P("[**]", NULL);

-	P("[s*,o*,O*]", NULL, NULL, NULL);

-	P(" s ", "test");

-	P("[ ]");

-	P("[ i , i,  i ] ", 1, 2, 3);

-	P("{\n\n1");

-	P("[}");

-	P("{]");

-	P("[");

-	P("{");

-	P("[i]a", 42);

-	P("ia", 42);

-	P("s", NULL);

-	P("+", NULL);

-	P(NULL);

-	P("{s:i}", NULL, 1);

-	P("{ {}: s }", "foo");

-	P("{ s: {},  s:[ii{} }", "foo", "bar", 12, 13);

-	P("[[[[[   [[[[[  [[[[ }]]]] ]]]] ]]]]]");

-

-	U("true", "b", &xi[0]);

-	U("false", "b", &xi[0]);

-	U("null", "n");

-	U("42", "i", &xi[0]);

-	U("123456789", "I", &xI[0]);

-	U("3.14", "f", &xf[0]);

-	U("12345", "F", &xf[0]);

-	U("3.14", "F", &xf[0]);

-	U("\"foo\"", "s", &xs[0]);

-	U("\"foo\"", "s%", &xs[0], &xz[0]);

-	U("{}", "{}");

-	U("[]", "[]");

-	U("{}", "o", &xo[0]);

-	U("{}", "O", &xo[0]);

-	U("{\"foo\":42}", "{si}", "foo", &xi[0]);

-	U("[1,2,3]", "[i,i,i]", &xi[0], &xi[1], &xi[2]);

-	U("{\"a\":1,\"b\":2,\"c\":3}", "{s:i, s:i, s:i}", "a", &xi[0], "b", &xi[1], "c", &xi[2]);

-	U("42", "z");

-	U("null", "[i]");

-	U("[]", "[}");

-	U("{}", "{]");

-	U("[]", "[");

-	U("{}", "{");

-	U("[42]", "[i]a", &xi[0]);

-	U("42", "ia", &xi[0]);

-	U("[]", NULL);

-	U("\"foo\"", "s", NULL);

-	U("42", "s", NULL);

-	U("42", "n");

-	U("42", "b", NULL);

-	U("42", "f", NULL);

-	U("42", "[i]", NULL);

-	U("42", "{si}", "foo", NULL);

-	U("\"foo\"", "n");

-	U("\"foo\"", "b", NULL);

-	U("\"foo\"", "i", NULL);

-	U("\"foo\"", "I", NULL);

-	U("\"foo\"", "f", NULL);

-	U("\"foo\"", "F", NULL);

-	U("true", "s", NULL);

-	U("true", "n");

-	U("true", "i", NULL);

-	U("true", "I", NULL);

-	U("true", "f", NULL);

-	U("true", "F", NULL);

-	U("[42]", "[ii]", &xi[0], &xi[1]);

-	U("{\"foo\":42}", "{si}", NULL, &xi[0]);

-	U("{\"foo\":42}", "{si}", "baz", &xi[0]);

-	U("[1,2,3]", "[iii!]", &xi[0], &xi[1], &xi[2]);

-	U("[1,2,3]", "[ii!]", &xi[0], &xi[1]);

-	U("[1,2,3]", "[ii]", &xi[0], &xi[1]);

-	U("[1,2,3]", "[ii*]", &xi[0], &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{sisi}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{sisi*}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{sisi!}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{si}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{si*}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42,\"baz\":45}", "{si!}", "baz", &xi[0], "foo", &xi[1]);

-	U("[1,{\"foo\":2,\"bar\":null},[3,4]]", "[i{sisn}[ii]]", &xi[0], "foo", &xi[1], "bar", &xi[2], &xi[3]);

-	U("[1,2,3]", "[ii!i]", &xi[0], &xi[1], &xi[2]);

-	U("[1,2,3]", "[ii*i]", &xi[0], &xi[1], &xi[2]);

-	U("{\"foo\":1,\"bar\":2}", "{si!si}", "foo", &xi[1], "bar", &xi[2]);

-	U("{\"foo\":1,\"bar\":2}", "{si*si}", "foo", &xi[1], "bar", &xi[2]);

-	U("{\"foo\":{\"baz\":null,\"bar\":null}}", "{s{sn!}}", "foo", "bar");

-	U("[[1,2,3]]", "[[ii!]]", &xi[0], &xi[1]);

-	U("{}", "{s?i}", "foo", &xi[0]);

-	U("{\"foo\":1}", "{s?i}", "foo", &xi[0]);

-	U("{}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);

-	U("{\"foo\":[1,2]}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);

-	U("{\"bar\":{\"baz\":{\"quux\":15}}}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);

-	U("{\"foo\":{\"bar\":4}}", "{s?{s?i}}", "foo", "bar", &xi[0]);

-	U("{\"foo\":{}}", "{s?{s?i}}", "foo", "bar", &xi[0]);

-	U("{}", "{s?{s?i}}", "foo", "bar", &xi[0]);

-	U("{\"foo\":42,\"baz\":45}", "{s?isi!}", "baz", &xi[0], "foo", &xi[1]);

-	U("{\"foo\":42}", "{s?isi!}", "baz", &xi[0], "foo", &xi[1]);

-	return 0;

-}

-

-#endif

-

-#if 0

-

-

-    /* Unpack the same item twice */

-    j = json_pack("{s:s, s:i, s:b}", "foo", "bar", "baz", 42, "quux", 1);

-    if(!json_unpack_ex(j, &error, 0, "{s:s,s:s!}", "foo", &s, "foo", &s))

-        fail("json_unpack object with strict validation failed");

-    {

-        const char *possible_errors[] = {

-            "2 object item(s) left unpacked: baz, quux",

-            "2 object item(s) left unpacked: quux, baz"

-        };

-        check_errors(possible_errors, 2, "<validation>", 1, 10, 10);

-    }

-    json_decref(j);

-

-#endif

-
\ No newline at end of file
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.h b/HAL-afb/HAL_MOST_UNICENS/wrap-json.h
deleted file mode 100644
index b5eadf5..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap-json.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*

- Copyright (C) 2016, 2017 "IoT.bzh"

-

- author: José Bollo <jose.bollo@iot.bzh>

-

- Licensed under the Apache License, Version 2.0 (the "License");

- you may not use this file except in compliance with the License.

- You may obtain a copy of the License at

-

-     http://www.apache.org/licenses/LICENSE-2.0

-

- Unless required by applicable law or agreed to in writing, software

- distributed under the License is distributed on an "AS IS" BASIS,

- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

- See the License for the specific language governing permissions and

- limitations under the License.

-*/

-

-#pragma once

-

-#include <stdarg.h>

-#include <json-c/json.h>

-

-extern int wrap_json_get_error_position(int rc);

-extern int wrap_json_get_error_code(int rc);

-extern const char *wrap_json_get_error_string(int rc);

-

-extern int wrap_json_vpack(struct json_object **result, const char *desc, va_list args);

-extern int wrap_json_pack(struct json_object **result, const char *desc, ...);

-

-extern int wrap_json_vunpack(struct json_object *object, const char *desc, va_list args);

-extern int wrap_json_unpack(struct json_object *object, const char *desc, ...);

-extern int wrap_json_vcheck(struct json_object *object, const char *desc, va_list args);

-extern int wrap_json_check(struct json_object *object, const char *desc, ...);

-extern int wrap_json_vmatch(struct json_object *object, const char *desc, va_list args);

-extern int wrap_json_match(struct json_object *object, const char *desc, ...);

-

-extern void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);

-extern void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);

-

-extern void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);

-extern void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);

-extern void wrap_json_object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);

-extern void wrap_json_optobject_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);

-extern void wrap_json_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);

-

-
\ No newline at end of file
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.md b/HAL-afb/HAL_MOST_UNICENS/wrap-json.md
deleted file mode 100644
index 3718b66..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap-json.md
+++ /dev/null
@@ -1,306 +0,0 @@
-WRAP-JSON facility

-==================

-

-The facility wrap-json is based on the pack/unpack API on the

-libray jansson. The two chapters below are copied from the

-documentation of jansson library copyrighted by Petri Lehtinen

-(see at end).

-

-Building Values

----------------

-

-This section describes functions that help to create, or *pack*, complex

-JSON values, especially nested objects and arrays. Value building is

-based on a *format string* that is used to tell the functions about the

-expected arguments.

-

-For example, the format string `"i"` specifies a single integer value,

-while the format string `"[ssb]"` or the equivalent `"[s, s, b]"`

-specifies an array value with two strings and a boolean as its items:

-

-    /* Create the JSON integer 42 */

-    wrap_json_pack(&result, "i", 42);

-

-    /* Create the JSON array ["foo", "bar", true] */

-    wrap_json_pack(&result, "[ssb]", "foo", "bar", 1);

-

-Here's the full list of format specifiers. The type in parentheses

-denotes the resulting JSON type, and the type in brackets (if any)

-denotes the C type that is expected as the corresponding argument or

-arguments.

-

-`s` (string) \[const char \*\]

-

-:   Convert a null terminated UTF-8 string to a JSON string.

-

-`s?` (string) \[const char \*\]

-

-:   Like `s`, but if the argument is *NULL*, output a JSON null value.

-

-`s*` (string) \[const char \*\]

-

-:   Like `s`, but if the argument is *NULL*, do not output any value.

-    This format can only be used inside an object or an array. If used

-    inside an object, the corresponding key is additionally suppressed

-    when the value is omitted. See below for an example.

-

-`s#` (string) \[const char \*, int\]

-

-:   Convert a UTF-8 buffer of a given length to a JSON string.

-

-`s%` (string) \[const char \*, size\_t\]

-

-:   Like `s#` but the length argument is of type size\_t.

-

-`+` \[const char \*\]

-

-:   Like `s`, but concatenate to the previous string. Only valid after

-    `s`, `s#`, `+` or `+#`.

-

-`+#` \[const char \*, int\]

-

-:   Like `s#`, but concatenate to the previous string. Only valid after

-    `s`, `s#`, `+` or `+#`.

-

-`+%` (string) \[const char \*, size\_t\]

-

-:   Like `+#` but the length argument is of type size\_t.

-

-`n` (null)

-

-:   Output a JSON null value. No argument is consumed.

-

-`b` (boolean) \[int\]

-

-:   Convert a C int to JSON boolean value. Zero is converted to `false`

-    and non-zero to `true`.

-

-`i` (integer) \[int\]

-

-:   Convert a C int to JSON integer.

-

-`I` (integer) \[json\_int\_t\]

-

-:   Convert a C json\_int\_t to JSON integer.

-

-`f` (real) \[double\]

-

-:   Convert a C double to JSON real.

-

-`o` (any value) \[json\_t \*\]

-

-:   Output any given JSON value as-is. If the value is added to an array

-    or object, the reference to the value passed to `o` is stolen by the

-    container.

-

-`O` (any value) \[json\_t \*\]

-

-:   Like `o`, but the argument's reference count is incremented. This is

-    useful if you pack into an array or object and want to keep the

-    reference for the JSON value consumed by `O` to yourself.

-

-`o?`, `O?` (any value) \[json\_t \*\]

-

-:   Like `o` and `O`, respectively, but if the argument is *NULL*,

-    output a JSON null value.

-

-`o*`, `O*` (any value) \[json\_t \*\]

-

-:   Like `o` and `O`, respectively, but if the argument is *NULL*, do

-    not output any value. This format can only be used inside an object

-    or an array. If used inside an object, the corresponding key is

-    additionally suppressed. See below for an example.

-

-`[fmt]` (array)

-

-:   Build an array with contents from the inner format string. `fmt` may

-    contain objects and arrays, i.e. recursive value building is

-    supported.

-

-`{fmt}` (object)

-

-:   Build an object with contents from the inner format string `fmt`.

-    The first, third, etc. format specifier represent a key, and must be

-    a string (see `s`, `s#`, `+` and `+#` above), as object keys are

-    always strings. The second, fourth, etc. format specifier represent

-    a value. Any value may be an object or array, i.e. recursive value

-    building is supported.

-

-Whitespace, `:` and `,` are ignored.

-

-More examples:

-

-    /* Build an empty JSON object */

-    wrap_json_pack(&result, "{}");

-

-    /* Build the JSON object {"foo": 42, "bar": 7} */

-    wrap_json_pack(&result, "{sisi}", "foo", 42, "bar", 7);

-

-    /* Like above, ':', ',' and whitespace are ignored */

-    wrap_json_pack(&result, "{s:i, s:i}", "foo", 42, "bar", 7);

-

-    /* Build the JSON array [[1, 2], {"cool": true}] */

-    wrap_json_pack(&result, "[[i,i],{s:b}]", 1, 2, "cool", 1);

-

-    /* Build a string from a non-null terminated buffer */

-    char buffer[4] = {'t', 'e', 's', 't'};

-    wrap_json_pack(&result, "s#", buffer, 4);

-

-    /* Concatenate strings together to build the JSON string "foobarbaz" */

-    wrap_json_pack(&result, "s++", "foo", "bar", "baz");

-

-    /* Create an empty object or array when optional members are missing */

-    wrap_json_pack(&result, "{s:s*,s:o*,s:O*}", "foo", NULL, "bar", NULL, "baz", NULL);

-    wrap_json_pack(&result, "[s*,o*,O*]", NULL, NULL, NULL);

-

-Parsing and Validating Values

------------------------------

-

-This section describes functions that help to validate complex values

-and extract, or *unpack*, data from them. Like building values

-&lt;apiref-pack&gt;, this is also based on format strings.

-

-While a JSON value is unpacked, the type specified in the format string

-is checked to match that of the JSON value. This is the validation part

-of the process. In addition to this, the unpacking functions can also

-check that all items of arrays and objects are unpacked. This check be

-enabled with the format specifier `!` or by using the flag

-`JSON_STRICT`. See below for details.

-

-Here's the full list of format specifiers. The type in parentheses

-denotes the JSON type, and the type in brackets (if any) denotes the C

-type whose address should be passed.

-

-`s` (string) \[const char \*\]

-

-:   Convert a JSON string to a pointer to a null terminated UTF-8

-    string. The resulting string is extracted by using

-    json\_string\_value() internally, so it exists as long as there are

-    still references to the corresponding JSON string.

-

-`s%` (string) \[const char \*, size\_t \*\]

-

-:   Convert a JSON string to a pointer to a null terminated UTF-8 string

-    and its length.

-

-`n` (null)

-

-:   Expect a JSON null value. Nothing is extracted.

-

-`b` (boolean) \[int\]

-

-:   Convert a JSON boolean value to a C int, so that `true` is converted

-    to 1 and `false` to 0.

-

-`i` (integer) \[int\]

-

-:   Convert a JSON integer to C int.

-

-`I` (integer) \[json\_int\_t\]

-

-:   Convert a JSON integer to C json\_int\_t.

-

-`f` (real) \[double\]

-

-:   Convert a JSON real to C double.

-

-`F` (integer or real) \[double\]

-

-:   Convert a JSON number (integer or real) to C double.

-

-`o` (any value) \[json\_t \*\]

-

-:   Store a JSON value with no conversion to a json\_t pointer.

-

-`O` (any value) \[json\_t \*\]

-

-:   Like `O`, but the JSON value's reference count is incremented.

-

-`[fmt]` (array)

-

-:   Convert each item in the JSON array according to the inner format

-    string. `fmt` may contain objects and arrays, i.e. recursive value

-    extraction is supported.

-

-`{fmt}` (object)

-

-:   Convert each item in the JSON object according to the inner format

-    string `fmt`. The first, third, etc. format specifier represent a

-    key, and must be `s`. The corresponding argument to unpack functions

-    is read as the object key. The second fourth, etc. format specifier

-    represent a value and is written to the address given as the

-    corresponding argument. **Note** that every other argument is read

-    from and every other is written to.

-

-    `fmt` may contain objects and arrays as values, i.e. recursive value

-    extraction is supported.

-

-`!`

-

-:   This special format specifier is used to enable the check that all

-    object and array items are accessed, on a per-value basis. It must

-    appear inside an array or object as the last format specifier before

-    the closing bracket or brace.

-

-`*`

-

-:   This special format specifier is the opposite of `!`. This is the default.

-    It must appear inside an array or object as the last format specifier

-    before the closing bracket or brace.

-

-Whitespace, `:` and `,` are ignored.

-

-Examples:

-

-    /* root is the JSON integer 42 */

-    int myint;

-    wrap_json_unpack(root, "i", &myint);

-    assert(myint == 42);

-

-    /* root is the JSON object {"foo": "bar", "quux": true} */

-    const char *str;

-    int boolean;

-    wrap_json_unpack(root, "{s:s, s:b}", "foo", &str, "quux", &boolean);

-    assert(strcmp(str, "bar") == 0 && boolean == 1);

-

-    /* root is the JSON array [[1, 2], {"baz": null} */

-    wrap_json_check(root, "[[i,i], {s:n}]", "baz");

-    /* returns 0 for validation success, nothing is extracted */

-

-    /* root is the JSON array [1, 2, 3, 4, 5] */

-    int myint1, myint2;

-    wrap_json_unpack(root, "[ii!]", &myint1, &myint2);

-    /* returns -1 for failed validation */

-

-    /* root is an empty JSON object */

-    int myint = 0, myint2 = 0, myint3 = 0;

-    wrap_json_unpack(root, "{s?i, s?[ii]}",

-                "foo", &myint1,

-                "bar", &myint2, &myint3);

-    /* myint1, myint2 or myint3 is no touched as "foo" and "bar" don't exist */

-

-

-Copyright

----------

-

-Copyright (c) 2009-2016 Petri Lehtinen <petri@digip.org>

-

-Permission is hereby granted, free of charge, to any person obtaining a copy

-of this software and associated documentation files (the "Software"), to deal

-in the Software without restriction, including without limitation the rights

-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

-copies of the Software, and to permit persons to whom the Software is

-furnished to do so, subject to the following conditions:

-

-The above copyright notice and this permission notice shall be included in

-all copies or substantial portions of the Software.

-

-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

-THE SOFTWARE.

-

-
\ No newline at end of file
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c
deleted file mode 100644
index 095a2fe..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
- * Author Tobias Jahnke
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-#define _GNU_SOURCE
-#define AFB_BINDING_VERSION 2
-
-#include <string.h>
-#include <json-c/json.h>
-#include <afb/afb-binding.h>
-#include "wrap_unicens.h"
-#include "wrap-json.h"
-
-typedef struct async_job_ {
-    wrap_ucs_result_cb_t result_fptr;
-    void *result_user_ptr;
-} async_job_t;
-
-typedef struct parse_result_ {
-    int done;
-    char *str_result;
-} parse_result_t;
-
-/* Subscribes to unicens2-binding events.
- * \return  Returns 0 if successful, otherwise != 0".
- */
-extern int wrap_ucs_subscribe_sync() {
-
-    json_object *j_response, *j_query = NULL;
-    int err;
-
-    /* Build an empty JSON object */
-    err = wrap_json_pack(&j_query, "{}");
-    if (err) {
-        AFB_ERROR("Failed to create subscribe json object");
-        goto OnErrorExit;
-    }
-
-    err = afb_service_call_sync("UNICENS", "subscribe", j_query, &j_response);
-    if (err) {
-        AFB_ERROR("Fail subscribing to UNICENS events");
-        goto OnErrorExit;
-    }
-    else {
-        AFB_NOTICE("Subscribed to UNICENS events, res=%s", json_object_to_json_string(j_response));
-        json_object_put(j_response);
-    }
-    json_object_put(j_query);
-    j_query = NULL;
-
-OnErrorExit:
-    if (j_query)
-        json_object_put(j_query);
-    return err;
-}
-
-/* Checks if name ends with a given letter. */
-static int wrap_ucs_string_ends_with(const char *name, char letter) {
-
-    int result = 0;
-    size_t len = strlen(name);
-
-    if (len > 0) {
-
-        if (name[len] == letter) {
-            result = 1;
-        }
-    }
-
-    return result;
-}
-
-/* Callback for iteration through found files. Marks search as "done" as
- * soon as the search pattern "kit.xml" matches.
- * \param closure   User reference. Points to parse_result_t.
- * \param j_obj     Points to json object within array.
- */
-static void wrap_ucs_find_xml_cb(void *closure, struct json_object *j_obj) {
-
-    const char *dir, *name;
-    parse_result_t *result;
-
-    if (!closure)
-        return;
-
-    result = (parse_result_t *)closure;
-    if (result->done)
-        return;
-
-    wrap_json_unpack(j_obj, "{s:s, s:s}", "dirpath", &dir, "basename", &name);
-    AFB_DEBUG("Found file: %s", name);
-
-    if(strstr(name, "kit.xml") != NULL) {
-        size_t sz = strlen(dir)+strlen(name)+10;
-        char * full_path = malloc(sz);
-
-        strncpy(full_path, dir, sz);
-
-        if (!wrap_ucs_string_ends_with(dir, '/'))
-            strncat(full_path, "/", sz);
-
-        strncat(full_path, name, sz);
-        AFB_DEBUG("Found XML file: %s", full_path);
-
-        result->done = 1;
-        result->str_result = full_path;
-    }
-}
-
-/* Retrieves XML configuration path to initialize unicens2-binding.
- * \param   config_path Directory containing XML configuration file(s).
- * \param   file_found  Points to found file_path or NULL if not found.
- *          Memory must be released by calling free().
- * \return  Returns 0 if successful, otherwise != 0".
- */
-extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found) {
-
-    int err = 0;
-    json_object *j_response, *j_query, *j_paths = NULL;
-    parse_result_t result = {.done = 0, .str_result = NULL};
-
-    *file_found = NULL;
-
-    /* Build JSON object to retrieve UNICENS configuration */
-    if ((config_path == NULL) || (strcmp(config_path, "") == 0))
-        err = wrap_json_pack(&j_query, "{}");
-    else
-        err = wrap_json_pack(&j_query, "{s:s}", "cfgpath", config_path);
-
-    if (err) {
-        AFB_ERROR("Failed to create listconfig json object");
-        goto OnErrorExit;
-    }
-
-    err = afb_service_call_sync("UNICENS", "listconfig", j_query, &j_response);
-    if (err) {
-        AFB_ERROR("Failed to call listconfig");
-        goto OnErrorExit;
-    }
-    else {
-        AFB_DEBUG("UNICENS listconfig result, res=%s", json_object_to_json_string(j_response));
-
-        if (json_object_object_get_ex(j_response, "response", &j_paths)) {
-
-            AFB_DEBUG("UNICENS listconfig result, paths=%s", json_object_to_json_string(j_paths));
-
-            wrap_json_optarray_for_all(j_paths, &wrap_ucs_find_xml_cb, &result);
-
-            if (result.done) {
-                *file_found = strdup(result.str_result);
-                free(result.str_result);
-                result.str_result = NULL;
-            }
-            else {
-                AFB_NOTICE("wrap_ucs_getconfig_sync, search pattern does not match for paths=%s", json_object_to_json_string(j_paths));
-                err = -1;
-            }
-        }
-
-        json_object_put(j_response);
-    }
-    json_object_put(j_query);
-    j_query = NULL;
-
-OnErrorExit:
-    if (j_query)
-        json_object_put(j_query);
-    return err;
-}
-
-/* Initializes the unicens2-binding.
- * \param   file_name     Path to XML configuration file or \c NULL for
- *                        first found file in default path.
- * \return  Returns 0 if successful, otherwise != 0".
- */
-extern int wrap_ucs_initialize_sync(const char *file_name) {
-    json_object *j_response, *j_query = NULL;
-    int err;
-
-    /* Build JSON object to initialize UNICENS */
-    if (file_name != NULL)
-        err = wrap_json_pack(&j_query, "{s:s}", "filename", file_name);
-    else
-        err = wrap_json_pack(&j_query, "{}");
-
-    if (err) {
-        AFB_ERROR("Failed to create initialize json object");
-        goto OnErrorExit;
-    }
-    err = afb_service_call_sync("UNICENS", "initialise", j_query, &j_response);
-    if (err) {
-        AFB_ERROR("Failed to initialize UNICENS");
-        goto OnErrorExit;
-    }
-    else {
-        AFB_NOTICE("Initialized UNICENS, res=%s", json_object_to_json_string(j_response));
-        json_object_put(j_response);
-    }
-
-    json_object_put(j_query);
-    j_query = NULL;
-
-OnErrorExit:
-    if (j_query)
-        json_object_put(j_query);
-    return err;
-}
-
-/* Write I2C command to a network node.
- * \param   node     Node address
- * \param   data_ptr Reference to command data
- * \param   data_sz  Size of the command data. Valid values: 1..32.
- * \return  Returns 0 if successful, otherwise != 0".
- */
-extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz) {
-
-    json_object *j_response, *j_query, *j_array = NULL;
-    int err;
-    uint8_t cnt;
-
-    j_query = json_object_new_object();
-    j_array = json_object_new_array();
-
-    if (!j_query || !j_array) {
-        err = -1;
-        AFB_ERROR("Failed to create writei2c json objects");
-        goto OnErrorExit;
-    }
-
-    for (cnt = 0U; cnt < data_sz; cnt++) {
-        json_object_array_add(j_array, json_object_new_int(data_ptr[cnt]));
-    }
-
-    json_object_object_add(j_query, "node", json_object_new_int(node));
-    json_object_object_add(j_query, "data", j_array);
-
-    err = afb_service_call_sync("UNICENS", "writei2c", j_query, &j_response);
-
-    if (err) {
-        AFB_ERROR("Failed to call writei2c_sync");
-        goto OnErrorExit;
-    }
-    else {
-        AFB_INFO("Called writei2c_sync, res=%s", json_object_to_json_string(j_response));
-        json_object_put(j_response);
-    }
-
-    json_object_put(j_query);
-    j_query = NULL;
-
-OnErrorExit:
-    if (j_query)
-        json_object_put(j_query);
-    return err;
-}
-
-/* ------------------ ASYNCHRONOUS API ---------------------------------------*/
-
-static void wrap_ucs_i2cwrite_cb(void *closure, int status, struct json_object *j_result) {
-
-    AFB_INFO("wrap_ucs_i2cwrite_cb: closure=%p status=%d, res=%s", closure, status, json_object_to_json_string(j_result));
-
-    if (closure) {
-        async_job_t *job_ptr = (async_job_t *)closure;
-
-        if (job_ptr->result_fptr)
-            job_ptr->result_fptr((uint8_t)abs(status), job_ptr->result_user_ptr);
-        
-        free(closure);
-    }
-}
-
-/* Write I2C command to a network node.
- * \param   node     Node address
- * \param   data_ptr Reference to command data
- * \param   data_sz  Size of the command data. Valid values: 1..32.
- * \return  Returns 0 if successful, otherwise != 0".
- */
-extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz,
-                             wrap_ucs_result_cb_t result_fptr,
-                             void *result_user_ptr) {
-
-    json_object *j_query, *j_array = NULL;
-    async_job_t *job_ptr = NULL;
-    int err;
-    uint8_t cnt;
-
-    j_query = json_object_new_object();
-    j_array = json_object_new_array();
-
-    if (!j_query || !j_array) {
-        err = -1;
-        AFB_ERROR("Failed to create writei2c json objects");
-        goto OnErrorExit;
-    }
-
-    for (cnt = 0U; cnt < data_sz; cnt++) {
-        json_object_array_add(j_array, json_object_new_int(data_ptr[cnt]));
-    }
-
-    json_object_object_add(j_query, "node", json_object_new_int(node));
-    json_object_object_add(j_query, "data", j_array);
-
-    job_ptr = malloc(sizeof(async_job_t));
-
-    if (!job_ptr) {
-        err = -1;
-        AFB_ERROR("Failed to create async job object");
-        goto OnErrorExit;
-    }
-
-    job_ptr->result_fptr = result_fptr;
-    job_ptr->result_user_ptr = result_user_ptr;
-
-    afb_service_call("UNICENS", "writei2c", j_query, wrap_ucs_i2cwrite_cb, job_ptr);
-    err = 0;
-    j_query = NULL;
-
-OnErrorExit:
-    if (j_query)
-        json_object_put(j_query);
-    return err;
-}
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h
deleted file mode 100644
index c28d13a..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*

- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.

- * Author Tobias Jahnke

- *

- * Licensed under the Apache License, Version 2.0 (the "License");

- * you may not use this file except in compliance with the License.

- * You may obtain a copy of the License at

- *

- *   http://www.apache.org/licenses/LICENSE-2.0

- *

- * Unless required by applicable law or agreed to in writing, software

- * distributed under the License is distributed on an "AS IS" BASIS,

- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

- * See the License for the specific language governing permissions and

- * limitations under the License.

- * 

- */

-

-#pragma once

-#include <stdint.h>

-

-/* Asynchronous API: result callback */

-typedef void (*wrap_ucs_result_cb_t)(uint8_t result, void *user_ptr);

-

-/* Asynchronous API: functions */

-extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz,

-                             wrap_ucs_result_cb_t result_fptr, 

-                             void *result_user_ptr);

-

-/* Synchronous API: functions */

-extern int wrap_ucs_subscribe_sync();

-extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found);

-extern int wrap_ucs_initialize_sync(const char* file_name);

-extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz);

diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c
deleted file mode 100644
index 5bc1e84..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
- * Author Tobias Jahnke
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-#define _GNU_SOURCE
-#define AFB_BINDING_VERSION 2
-
-#include <string.h>
-#include <time.h>
-#include <assert.h>
-#include <json-c/json.h>
-#include <afb/afb-binding.h>
-
-#include "wrap_volume.h"
-#include "wrap_unicens.h"
-#include "libmostvolume.h"
-
-static int wrap_volume_service_timeout_cb(sd_event_source* source,
-        uint64_t timer __attribute__((__unused__)),
-        void *userdata __attribute__((__unused__))) {
-
-    uint8_t ret;
-
-    sd_event_source_unref(source);
-    ret = lib_most_volume_service();
-
-    if (ret != 0U) {
-        AFB_ERROR("lib_most_volume_service returns %d", ret);
-    }
-
-    return 0;
-}
-
-static void wrap_volume_service_cb(uint16_t timeout) {
-    uint64_t usec;
-    sd_event_now(afb_daemon_get_event_loop(), CLOCK_BOOTTIME, &usec);
-    sd_event_add_time(  afb_daemon_get_event_loop(), NULL, CLOCK_MONOTONIC,
-                        usec + (timeout*1000),
-                        250,
-                        wrap_volume_service_timeout_cb,
-                        NULL);
-}
-
-/* Retrieves a new value adapted to a new maximum value. Minimum value is
- * always zero. */
-static int wrap_volume_calculate(int value, int max_old, int max_new) {
-
-    if (value > max_old)
-        value = max_old;
-
-    value = (value * max_new) / max_old; /* calculate range: 0..255 */
-    assert(value <= max_new);
-
-    return value;
-}
-
-extern int wrap_volume_init(void) {
-
-    uint8_t ret = 0U;
-    lib_most_volume_init_t mv_init;
-
-    mv_init.writei2c_cb = &wrap_ucs_i2cwrite;
-    mv_init.service_cb = wrap_volume_service_cb;
-
-    ret = lib_most_volume_init(&mv_init);
-
-    return ret * (-1);
-}
-
-extern int wrap_volume_master(int volume) {
-
-    int new_value, ret;
-
-    new_value = wrap_volume_calculate(volume, 100, 255);
-    ret = lib_most_volume_set(LIB_MOST_VOLUME_MASTER, (uint8_t)new_value);
-
-    if (ret != 0) {
-        AFB_ERROR("wrap_volume_master: volume library not ready.");
-        ret = ret * (-1); /* make return value negative */
-    }
-
-    return ret;
-}
-
-extern int wrap_volume_pcm(int *volume_ptr, int volume_sz) {
-
-    const int MAX_PCM_CHANNELS = 6;
-    int cnt, ret;
-    assert(volume_ptr != NULL);
-    assert(volume_sz <= MAX_PCM_CHANNELS);
-
-    for (cnt = 0; cnt < volume_sz; cnt ++) {
-
-        int new_value = wrap_volume_calculate(volume_ptr[cnt], 100, 255);
-        ret = lib_most_volume_set((enum lib_most_volume_channel_t)cnt, (uint8_t)new_value);
-
-        if (ret != 0) {
-            AFB_ERROR("wrap_volume_pcm: volume library not ready.");
-            ret = ret * (-1); /* make return value negative */
-            break;
-        }
-    }
-
-    return ret;
-}
-
-extern int wrap_volume_node_avail(int node, int available) {
-    
-    int ret;
-    ret = lib_most_volume_node_available((uint16_t)node, (uint8_t)available);
-    
-    if (ret != 0) {
-        AFB_ERROR("wrap_volume_node_avail: volume library not ready.");
-        ret = ret * (-1); /* make return value negative */
-    }
-    
-    return ret;
-}
-
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h
deleted file mode 100644
index 099b70c..0000000
--- a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*

- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.

- * Author Tobias Jahnke

- *

- * Licensed under the Apache License, Version 2.0 (the "License");

- * you may not use this file except in compliance with the License.

- * You may obtain a copy of the License at

- *

- *   http://www.apache.org/licenses/LICENSE-2.0

- *

- * Unless required by applicable law or agreed to in writing, software

- * distributed under the License is distributed on an "AS IS" BASIS,

- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

- * See the License for the specific language governing permissions and

- * limitations under the License.

- * 

- */

-

-#pragma once

-#include <stdint.h>

-#include <systemd/sd-event.h>

-

-extern int wrap_volume_init(void);

-extern int wrap_volume_master(int volume);

-extern int wrap_volume_pcm(int *volume_ptr, int volume_sz);

-extern int wrap_volume_node_avail(int node, int available);