summaryrefslogtreecommitdiffstats
path: root/conf.d/project/alsa.d/README.md
diff options
context:
space:
mode:
authorTobias Jahnke <tobias.jahnke@microchip.com>2018-12-17 16:51:56 +0100
committerTobias Jahnke <tobias.jahnke@microchip.com>2018-12-17 16:51:56 +0100
commit8ef79c4fe380e590a7050f76605f304726eca664 (patch)
tree6a4f9dfd669c8e1541d01581c0eb2409091fbc83 /conf.d/project/alsa.d/README.md
parent6c067df867da74cab78c987aa9299290f08c280a (diff)
4a-hal-unicens: prepare import of plugin
Bug-AGL: SPEC-1505 - remove all files from legacy hal binding Change-Id: I69e6d170cfa6a16d116f63263a1a5f75e2098d5b Signed-off-by: Tobias Jahnke <tobias.jahnke@microchip.com>
Diffstat (limited to 'conf.d/project/alsa.d/README.md')
-rw-r--r--conf.d/project/alsa.d/README.md175
1 files changed, 0 insertions, 175 deletions
diff --git a/conf.d/project/alsa.d/README.md b/conf.d/project/alsa.d/README.md
deleted file mode 100644
index aa2a54e..0000000
--- a/conf.d/project/alsa.d/README.md
+++ /dev/null
@@ -1,175 +0,0 @@
-
-Alsa Configuration is not complex, but it's heavy and every except intuitive.
-
-In order to set your configuration move step by step. And verify at each new step that you did not introduce a regression.
-
-### Make sure your board is not taken by PulseAudio
-
-* Pavucontrol is your friend. Go in device configuration and switch to off the device you want to make available to ALSA.
-* Check for your device list with 'play -l'. Note that just after card number your get an alias for your sound card.
- it is simpler to use this alias, card number will change depending on plug/unplug of device when this alias name
- is more stable (except for few stupid driver who use 'USB' as sound card name.
-* When your know your sound alias (eg:v1340 in mu case) you can test it with 'speaker-test -D v1340 -c2 -twav'. You may also
- use sound card number with 'speaker-test -D hw:0 -c2 -twav'. Nevertheless as said previously this number is not stable.
-* you are now ready to write your $HOME/.asoundrc config
-
-Note that $HOME/.asoundrc is loaded within libasound client and not by Alsa kernel, this is the reason why you do not need
-to activate any control or restart a daemon for modifications to be taken in account.
-
-To use ALSA with AAAA and the controller you need to write 1 section in your ALSA config
-
-* Sound Card Mixer: Allows multiple audio stream to be played on the same sound card. If hardware support mixer, Alsa will use it. If
- not it will provide mixing by software.
-* Audio Role Volume: They provide independent volume for each audio role. For reference, we use Alsa softvolume, depending on
- your hardware you may have this directly avaliable from your sound card.
-* Authorised Audio PCM: those channel are designed for applications we do not trust and then enforce AAAA control check
- before granting the access to a given channel.
-
-### Sound Card Mixer
-
-```
-pcm.SoundCardMixer {
- type dmix
- ipc_key 1024
- ipc_key_add_uid false
- ipc_perm 0666 # mixing for all users
-
- # Define target effective sound card (cannot be a plugin)
- slave { pcm "hw:v1340" } #Jabra Solmate
-
- # DMIX can only map two channels
- bindings {
- 0 0
- 1 1
- }
-}
-```
-
-Warning: if you have more than one Mixer each of them should have a unique ipc_key. You sound card alias move in the slave section.
-When this is done you may try your mixer with:
-
-```
- speaker-test -D MyMixerPCM -c2 -twav
-```
-
-
-### Audio Role
-
-```
-pcm.NavigationRole {
- type softvol
-
- # Point Slave on HOOK for policies control
- slave.pcm "SoundCardMixer"
-
- # name should match with HAL but do not set card=xx
- control.name "Playback Navigation"
-
-}
-
-```
-
-The slave you point to your SoundCardMixer, and the control.name should be EXACTLY the same as the one defined in your HAL.
-
-
-WARNING: The control here "Playback Navigation" is a user defined kernel control. It means that this kernel is created in
-kernel space, but that its action happen in user space. When create those control remains visible until you reset your
-sound card (eg: unplug USB), but they are save each time you reboot. It is recommended to start AAAA binder before testing
-your softvol audio role channel. If you do the opposite the control will be create by Alsa Plugin and this will not inherit
-of the default value you have in your HAL.
-
-When in place you should test it with:
-```
- speaker-test -D NavigationRole -c2 -twav
-```
-
-IMPORTANT: control volume are attache to your physical hardware and not to intermediary level (Softvol or Mixer). To see the
-newly created channel you should use
-```
- amixer -Dhw:v1340 controls | grep -i playback
-```
-
-## Authorised Audio PCM
-
-This PCM is supervised with the AAAA audio hook plugin. The pluging and will any application request on this PCM and will
-1st request an autorisation from AAAA controller to grant access for the client application. To do so, two things:
-* the plugin should be declared (only once)
-* you should declare as many authorized PCM as you need.
-
-### Plugin declaration
-
-```
-pcm_hook_type.MyHookPlugin {
- install "AlsaInstallHook"
- lib "/home/fulup/Workspace/AGL-AppFW/audio-bindings-dev/build/Alsa-Plugin/Alsa-Policy-Hook/policy_hook_cb.so"
-}
-
-```
-
-Lib is the path where to find AAAA Alsa hook plugin, install is the name of the init function it should not be changed.
-
-
-When your plugin is defined you may declare your authorised PCM. Those PCM like softvol will take a slave, typically a lower
-level of the audio role, or directly a mixer if your goal is to protect directly the Mixer. The AAAA Plugin hook take as
-
-```
-pcm.AuthorisedToNavigationOnly {
- type hooks
- slave.pcm "NavigationRole"
- # Defined used hook sharelib and provide arguments/config to install func
- hooks.0 {
- type "MyHookPlugin"
- hook_args {
- verbose true # print few log messages (default false);
-
- # Every Call should return OK in order PCM to open (default timeout 100ms)
- uri "ws://localhost:1234/api?token=audio-agent-token&uuid=audio-agent-session"
- request {
- # Request autorisation to write on navigation
- RequestNavigation {
- api "control"
- verb "dispatch"
- query "{'target':'navigation', 'args':{'device':'Jabra SOLEMATE v1.34.0'}}"
- }
- }
- # map event reception to self generated signal
- event {
- pause 30
- resume 31
- stop 3
- }
- }
- }
-}
-
-```
-
- * The slave is the PCM that application will be transfer to if access to control is granted.
- * Request is a suite à control action that respond to AGL standard application framework API
- * Event is the mapping of signal an appplication will receive in case AAAA controller push event to the audio application.
-
-When using AAAA controller, most action should be transfert to the controller that will take action to authorise/deny the access.
-Nevertheless it is also possible to directly access a lower level (e.g. call alsa Use Case Manager). People may also have their
-own audio policy engine and request it directly from here.
-
-To test this last part your need to have a controller ready to respond to your request. Otherwise control will systematically
-be denied. When your AAAA controller is ready to serve your request you may check this with
-```
- amixer -Dhw:AuthorisedToMusicOnly controls | grep -i playback
- amixer -Dhw:AuthorisedToNavigationOnly controls | grep -i playback
-```
-
-IMPORTANT: you need at least to audio role to really test this part. While you may assert with one channel that your flow
-to accept/deny application works. You need two simultaneous audio stream to really play with the control. Typically when playing
-music if you send a navigation message then the audio will be lower during the rendering of the navigation message.
-
-The action on how you lower an audio role when an other one with a higger level of priority come in place not defined at the
-plugin level, but in the AAAA controller, where the API control/dispatch?target=xxxxx will execute a set of actions corresponding
-the set/unset accept/deny of requested control.
-
-Remark: to understand what is happening it is a good idea to have an alxamixer option on the your soundcard
-```
- amixer -Dhw:v1340
-```
-
-(!) Do not forget to replace 'hw:v1340' by what ever is the alias of your sound card. \ No newline at end of file