diff options
Diffstat (limited to 'MOST_UNICENS')
| -rw-r--r-- | MOST_UNICENS/CMakeLists.txt | 45 | ||||
| -rw-r--r-- | MOST_UNICENS/README.md | 51 | ||||
| -rw-r--r-- | MOST_UNICENS/hal_most_unicens.c | 240 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/CMakeLists.txt | 26 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/inc/device_container.h | 59 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/inc/device_value.h | 104 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/inc/libmostvolume.h | 114 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/inc/setup.h | 73 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/src/CMakeLists.txt | 39 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/src/device_container.cpp | 194 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/src/device_value.cpp | 175 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp | 101 | ||||
| -rw-r--r-- | MOST_UNICENS/ucs2-vol/src/setup.cpp | 96 | ||||
| -rw-r--r-- | MOST_UNICENS/wrap_unicens.c | 368 | ||||
| -rw-r--r-- | MOST_UNICENS/wrap_unicens.h | 35 | ||||
| -rw-r--r-- | MOST_UNICENS/wrap_volume.c | 133 | ||||
| -rw-r--r-- | MOST_UNICENS/wrap_volume.h | 26 |
17 files changed, 0 insertions, 1879 deletions
diff --git a/MOST_UNICENS/CMakeLists.txt b/MOST_UNICENS/CMakeLists.txt deleted file mode 100644 index 5d91d1e..0000000 --- a/MOST_UNICENS/CMakeLists.txt +++ /dev/null @@ -1,45 +0,0 @@ -########################################################################### -# Copyright 2015, 2016, 2017 IoT.bzh -# -# author: Fulup Ar Foll <fulup@iot.bzh> -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -########################################################################### - -ADD_SUBDIRECTORY(ucs2-vol) - -# Add target to project dependency list -PROJECT_TARGET_ADD(hal-most-unicens) - - # Define project Targets - ADD_LIBRARY(hal-most-unicens MODULE hal_most_unicens.c wrap_unicens.c wrap_volume.c) - - # Binder exposes a unique public entry point - SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES - PREFIX "afb-" - LABELS "BINDING" - OUTPUT_NAME ${TARGET_NAME} - ) - - # Library dependencies (include updates automatically) - TARGET_LINK_LIBRARIES(${TARGET_NAME} - hal-utilities-4a - afb-helpers - ucs2-volume - ${link_libraries} - ) - - # Define properties to expose when others use this target - TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME} - PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/ucs2-vol/inc - ) diff --git a/MOST_UNICENS/README.md b/MOST_UNICENS/README.md deleted file mode 100644 index 4ce4261..0000000 --- a/MOST_UNICENS/README.md +++ /dev/null @@ -1,51 +0,0 @@ - -# HAL for MOST Sound Card - -## Introduction -This Hardware Abstraction Layer (HAL) is intended to control MOST audio via -standard ALSA mixer controls. Therefore the HAL add's controls to the MOST sound -card. Modification of the mixer controls is mapped to control commands which are -send to MOST nodes. - -The HAL requires to access the UNICENS V2 binding which is setting up the MOST -network and the MOST node. - -Please check the following required components: -* MOST Linux Driver -* User must be member of "audio" group -* UNICENS V2 binding -* [K2L MOST150 Audio 5.1 Kit](https://www.k2l.de/products/74/MOST150%20Audio%205.1%20Kit/) - -## Possible Modifications -Check if you need to adapt the default path for UNICENS configuration, e.g. -``` -#define XML_CONFIG_PATH "/opt/AGL/unicens2-binding/config_multichannel_audio_kit.xml" -``` - -Check if you need to adapt the name of the MOST sound card. -``` -#define ALSA_CARD_NAME "Microchip MOST:1" -``` - -You can check your MOST sound card name by calling ```aplay -l```, e.g. -``` -aplay -l -**** List of PLAYBACK Hardware Devices **** -card 0: PCH [HDA Intel PCH], device 0: 92HD90BXX Analog [92HD90BXX Analog] - Subdevices: 1/1 - Subdevice #0: subdevice #0 -card 1: ep016ch [Microchip MOST:1], device 0: ep01-6ch [] - Subdevices: 1/1 - Subdevice #0: subdevice #0 -card 2: ep022ch [Microchip MOST:2], device 0: ep02-2ch [] - Subdevices: 1/1 - Subdevice #0: subdevice #0 - -``` -Choose the first sound card with 6 channels, e.g. if you see ```ep01-6ch``` just -take ```Microchip MOST:1```. - -If you get messed up with card enumeration the following action may help: -- Unplug your MOST USB hardware from target -- Call ```sudo rm /var/lib/alsa/asound.state``` -- Connect MOST USB hardware after reboot or restart of ALSA diff --git a/MOST_UNICENS/hal_most_unicens.c b/MOST_UNICENS/hal_most_unicens.c deleted file mode 100644 index d106d6e..0000000 --- a/MOST_UNICENS/hal_most_unicens.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. - * Author Tobias Jahnke - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - */ -#define _GNU_SOURCE -#include <string.h> -#include "hal-interface.h" -#include "wrap-json.h" -#include "wrap_unicens.h" -#include "wrap_volume.h" - -#define ALSA_CARD_NAME "ep016ch" -#define ALSA_DEVICE_ID "hw:ep016ch" -#define PCM_MAX_CHANNELS 6 - -/* Define few private tag for not standard functions */ -#define PCM_Volume_Multimedia 1000 -#define PCM_Volume_Navigation 1001 -#define PCM_Volume_Emergency 1002 - -static int master_volume = 80; -static json_bool master_switch; -static int pcm_volume[PCM_MAX_CHANNELS] = {100,100,100,100,100,100}; - -static void unicens_apply_card_value(void *closure, struct json_object *j_obj){ - - int num_id = 0; - int values[6]; - - /* apply master volume */ - if (wrap_json_unpack(j_obj, "{s:i, s:[i!]}", "id", &num_id, "val", - &values[0]) - == 0) { - if (num_id == 1) { - AFB_NOTICE("unicens_apply_card_value: num_id: %d, value: %d", - num_id, - values[0]); - wrap_volume_master(values[0]); - return; - } - } - - if (wrap_json_unpack(j_obj, "{s:i, s:[iiiiii!]}", "id", &num_id, "val", - &values[0], &values[1], &values[2], &values[3], &values[4], &values[5]) - == 0) { - if (num_id == 2) { - AFB_NOTICE("unicens_apply_card_value: success, num_id: %d", num_id); - wrap_volume_pcm(&values[0], 6); - return; - } - } - - AFB_ERROR("unicens_apply_card_value: no card value applied"); -} - - -static void unicens_request_card_values_cb(void *closure, int status, struct json_object *j_response) { - - json_object *j_obj; - - AFB_INFO("unicens_request_card_values_cb: closure=%p status=%d, res=%s", closure, status, json_object_to_json_string(j_response)); - - if (json_object_object_get_ex(j_response, "response", &j_obj)) { - - wrap_json_optarray_for_all(j_obj, &unicens_apply_card_value, NULL); - } -} - -static __attribute__((unused)) void unicens_request_card_values(const char* dev_id) { - - int err; - json_object *j_query = NULL; - - err = wrap_json_pack(&j_query, "{s:s, s:i}", "devid", dev_id, "mode", 0); - - if (err) { - AFB_ERROR("Failed to call wrap_json_pack"); - goto OnErrorExit; - } - - afb_service_call("alsacore", "ctlget", j_query, - &unicens_request_card_values_cb, - NULL); - -OnErrorExit: - return; -} - -void unicens_master_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { - - const char *j_str = json_object_to_json_string(j_obj); - - if (wrap_json_unpack(j_obj, "[i!]", &master_volume) == 0) { - AFB_NOTICE("master_volume: %s, value=%d", j_str, master_volume); - wrap_volume_master(master_volume); - } - else { - AFB_NOTICE("master_volume: INVALID STRING %s", j_str); - } -} - -void unicens_master_switch_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { - - const char *j_str = json_object_to_json_string(j_obj); - - if (wrap_json_unpack(j_obj, "[b!]", &master_switch) == 0) { - AFB_NOTICE("master_switch: %s, value=%d", j_str, master_switch); - } - else { - AFB_NOTICE("master_switch: INVALID STRING %s", j_str); - } -} - -void unicens_pcm_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { - - const char *j_str = json_object_to_json_string(j_obj); - - if (wrap_json_unpack(j_obj, "[iiiiii!]", &pcm_volume[0], &pcm_volume[1], &pcm_volume[2], &pcm_volume[3], - &pcm_volume[4], &pcm_volume[5]) == 0) { - AFB_NOTICE("pcm_vol: %s", j_str); - wrap_volume_pcm(pcm_volume, PCM_MAX_CHANNELS/*array size*/); - } - else { - AFB_NOTICE("pcm_vol: INVALID STRING %s", j_str); - } -} - -/* declare ALSA mixer controls */ -STATIC alsaHalMapT alsaHalMap[]= { - { .tag=Master_Playback_Volume, .cb={.callback=unicens_master_vol_cb, .handle=&master_volume}, .info="Sets master playback volume", - .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=1, .minval=0, .maxval=100, .step=1, .value=80, .name="Master Playback Volume"} - }, -#if 0 - /*{ .tag=Master_OnOff_Switch, .cb={.callback=unicens_master_switch_cb, .handle=&master_switch}, .info="Sets master playback switch", - .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_BOOLEAN, .count=1, .minval=0, .maxval=1, .step=1, .value=1, .name="Master Playback Switch"} - },*/ - { .tag=PCM_Playback_Volume, .cb={.callback=unicens_pcm_vol_cb, .handle=&pcm_volume}, .info="Sets PCM playback volume", - .ctl={.numid=CTL_AUTO, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=6, .minval=0, .maxval=100, .step=1, .value=100, .name="PCM Playback Volume"} - }, -#endif - { .tag=EndHalCrlTag} /* marker for end of the array */ -} ; - -/* HAL sound card mapping info */ -STATIC alsaHalSndCardT alsaHalSndCard = { - .name = ALSA_CARD_NAME, /* WARNING: name MUST match with 'aplay -l' */ - .info = "HAL for MICROCHIP MOST sound card controlled by UNICENS binding", - .ctls = alsaHalMap, - .volumeCB = NULL, /* use default volume normalization function */ -}; - -/* initializes ALSA sound card, UNICENS API */ -STATIC int unicens_service_init() { - int err = 0; - AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING"); - - err = wrap_volume_init(); - if (err) { - AFB_ERROR("Failed to initialize wrapper for volume library"); - goto OnErrorExit; - } - - /* Step 1: Set output volume to pre-defined level */ - /* in order to avoid muted volume to be persistent after boot. */ - wrap_volume_master(80); - wrap_volume_pcm(pcm_volume, PCM_MAX_CHANNELS/*array size*/); - - /* Step 2: risk to have influence on mixer controls init */ - /* request of initial card values */ - /* unicens_request_card_values(ALSA_DEVICE_ID); */ - - err = halServiceInit(afbBindingV2.api, &alsaHalSndCard); - if (err) { - AFB_ERROR("Cannot initialize ALSA soundcard."); - goto OnErrorExit; - } - - err= afb_daemon_require_api("UNICENS", 1); - if (err) { - AFB_ERROR("Failed to access UNICENS API"); - goto OnErrorExit; - } - - err = wrap_ucs_subscribe_sync(); - if (err) { - AFB_ERROR("Failed to subscribe to UNICENS binding"); - goto OnErrorExit; - } - -OnErrorExit: - AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING done.."); - return err; -} - -// This receive all event this binding subscribe to -PUBLIC void unicens_event_cb(const char *evtname, json_object *j_event) { - - if (strncmp(evtname, "alsacore/", 9) == 0) { - halServiceEvent(evtname, j_event); - return; - } - - if (strncmp(evtname, "UNICENS/", 8) == 0) { - //AFB_NOTICE("unicens_event_cb: evtname=%s, event=%s", evtname, json_object_get_string(j_event)); - if (strcmp(evtname, "UNICENS/node-availibility") == 0) { - - int node; - int available; - if (wrap_json_unpack(j_event, "{s:i,s:b}", "node", &node, "available", &available) == 0) { - AFB_NOTICE("Node-Availability: node=0x%03X, available=%d", node, available); - wrap_volume_node_avail(node, available); - } - } - - return; - } - - AFB_NOTICE("unicens_event_cb: UNHANDLED EVENT, evtname=%s, event=%s", evtname, json_object_get_string(j_event)); -} - -/* API prefix should be unique for each snd card */ -PUBLIC const struct afb_binding_v2 afbBindingV2 = { - .api = "hal-most-unicens", - .init = unicens_service_init, - .verbs = halServiceApi, - .onevent = unicens_event_cb, -}; diff --git a/MOST_UNICENS/ucs2-vol/CMakeLists.txt b/MOST_UNICENS/ucs2-vol/CMakeLists.txt deleted file mode 100644 index c734639..0000000 --- a/MOST_UNICENS/ucs2-vol/CMakeLists.txt +++ /dev/null @@ -1,26 +0,0 @@ -########################################################################### -# Copyright 2015, 2016, 2017 IoT.bzh -# -# author: Fulup Ar Foll <fulup@iot.bzh> -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -########################################################################### - - - -# Define subproject targets -ADD_SUBDIRECTORY(src) - - - - diff --git a/MOST_UNICENS/ucs2-vol/inc/device_container.h b/MOST_UNICENS/ucs2-vol/inc/device_container.h deleted file mode 100644 index 9fabdb5..0000000 --- a/MOST_UNICENS/ucs2-vol/inc/device_container.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#ifndef DEVICECONTAINER_H -#define DEVICECONTAINER_H - -#include "device_value.h" -#include "libmostvolume.h" - -class CDeviceContainer { - -public: - CDeviceContainer(); - virtual ~CDeviceContainer(); - - void AssignService(lib_most_volume_init_t *init_ptr) {_init_ptr = init_ptr;} - - void RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz); - void SetValue(uint16_t key, uint8_t value); - void ClearValues(); - void Update(); - void ChangeNodeAvailable(uint16_t address, bool available); - -private: - void RequestService(uint16_t timeout); - void IncrementProcIndex(void); - void HandleI2cResult(uint8_t result); - static void OnI2cResult(uint8_t result, void *obj_ptr); - - uint16_t _idx_processing; - uint16_t _values_sz; - CDeviceValue **_values_pptr; - bool _tx_busy; - bool _service_requested; - lib_most_volume_init_t *_init_ptr; -}; - -#endif /* DEVICECONTAINER_H */ - diff --git a/MOST_UNICENS/ucs2-vol/inc/device_value.h b/MOST_UNICENS/ucs2-vol/inc/device_value.h deleted file mode 100644 index c2fe0b1..0000000 --- a/MOST_UNICENS/ucs2-vol/inc/device_value.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#ifndef DEVICEVALUE_H -#define DEVICEVALUE_H - -#include <stdint.h> -#include "libmostvolume.h" - -struct SRxMessage { - uint32_t devInst; /*instance if multiple devices are using the same group id*/ - uint32_t sourceAddr; - uint32_t targetAddr; - uint32_t nFBlock; - uint32_t nInst; - uint32_t nFunc; - uint32_t nOpType; - const uint8_t *pPayload; - uint32_t payloadLen; -}; - -struct STxMessage { - uint32_t devInst; /*instance if multiple devices are using the same group id*/ - uint32_t targetAddr; - uint32_t nFBlock; - uint32_t nInst; - uint32_t nFunc; - uint32_t nOpType; - const uint8_t *pPayload; - uint32_t payloadLen; -}; - -enum DeviceValueType { - DEVICE_VAL_MASTER = 0, - DEVICE_VAL_LEFT = 1, - DEVICE_VAL_RIGHT = 2, - DEVICE_VAL_FIBERDYNE_MASTER = 3 - -}; - -class CDeviceValue { -public: - CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key, bool is_i2c); - virtual ~CDeviceValue(); - - uint16_t GetKey(){return _key;} - DeviceValueType GetType(){return _type;} // returns the assigned type - void SetValue(uint8_t value){_target_value = value;} // sets desired value - - bool RequiresUpdate(); // returns true if target is not actual value - // returns true if success, false if failed - // -> stop transmission - bool FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr, - lib_most_volume_writei2c_result_cb_t result_fptr, - void *result_user_ptr);// fires message & updates actual value - bool FireControlMessage(lib_most_volume_sendmessage_cb_t sendmsg_fptr); - - void SetAvailable(bool active){this->_is_available = active; _actual_value = 0x01u;} - bool IsAvailable() {return this->_is_available;} - uint16_t GetAddress() {return this->_address;} - -private: - void ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[]); - void HandleI2cResult(uint8_t result); - static void OnI2cResult(uint8_t result, void *obj_ptr); - - bool _is_available; // related node is available - bool _is_busy; // do not update while busy - bool _is_i2c; - DeviceValueType _type; // determines the remote i2c command - uint16_t _key; // lookup key - uint16_t _address; // target node/group address - uint8_t _target_value; // desired value - uint8_t _transmitted_value;// value pending during transmission - uint8_t _actual_value; // value set and confirmed via network - uint8_t _tx_payload[20]; - uint8_t _tx_payload_sz; - - lib_most_volume_writei2c_result_cb_t _result_fptr; - void *_result_user_ptr; -}; - -#endif /* DEVICEPROPERTY_H */ - diff --git a/MOST_UNICENS/ucs2-vol/inc/libmostvolume.h b/MOST_UNICENS/ucs2-vol/inc/libmostvolume.h deleted file mode 100644 index 5335754..0000000 --- a/MOST_UNICENS/ucs2-vol/inc/libmostvolume.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#ifndef LIB_MOST_VOLUME_H -#define LIB_MOST_VOLUME_H - -#include <stdint.h> - - -#ifdef __cplusplus -extern "C" { -#endif - -/** Describes the volume control */ -enum lib_most_volume_channel_t{ - LIB_MOST_VOLUME_CH_FRONT_LEFT = 0, - LIB_MOST_VOLUME_CH_FRONT_RIGHT = 1, - LIB_MOST_VOLUME_CH_REAR_LEFT = 2, - LIB_MOST_VOLUME_CH_REAR_RIGHT = 3, - LIB_MOST_VOLUME_CH_CENTER = 4, - LIB_MOST_VOLUME_CH_SUB = 5, - LIB_MOST_VOLUME_MASTER = 6 -}; - -/** Is fired when the application shall call "lib_most_volume_service()" after a certain time - * \param timeout Time in ms after which the application shall call lib_most_volume_service(). - * Valid values: - * 0x0000: as soon as possible, - * 0x0001..0xFFFE: timeout in ms, - * 0xFFFF: never - */ -typedef void (*lib_most_volume_service_cb_t)(uint16_t timeout); - -typedef void (*lib_most_volume_writei2c_result_cb_t)(uint8_t result, void *user_ptr); - -/** Callback function required to write volume changes to network devices - * \param node The node address - * \param data_ptr I2C command data - * \param data_sz Size of the I2C command data - * \return Returns \c 0 for success, other value on failure. - */ -typedef int (*lib_most_volume_writei2c_cb_t)(uint16_t node, uint8_t *data_ptr, uint8_t data_sz, - lib_most_volume_writei2c_result_cb_t result_fptr, - void *result_user_ptr); - -typedef int (*lib_most_volume_sendmessage_cb_t)(uint16_t node, uint16_t msgid, uint8_t *data_ptr, uint8_t data_sz); - -typedef struct lib_most_volume_init_ { - lib_most_volume_service_cb_t service_cb; - lib_most_volume_writei2c_cb_t writei2c_cb; - lib_most_volume_sendmessage_cb_t sendmsg_cb; - -} lib_most_volume_init_t; - - -/** Initializes the library - * \param UNICENS_inst Reference to the UNICENS instance, created by the application. - * \param req_service_fptr Callback function which is fired if the application shall call - * lib_most_volume_service. - * \return '0' on success, otherwise value >'0'. - */ -extern uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr); - -/** Terminates the library - * \return '0' on success, otherwise value >'0'. - */ -extern uint8_t lib_most_volume_exit(void); - -/** Sets a single volume value. - * \param channel The volume control to be set. - * \param volume The volume value to be set. Valid values: 0..255. - * \return '0' on success, otherwise value >'0'. - */ -extern uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume); - -/** Must be called when the availability of a node has changed - * \param address The node address - * \param available Availability: 0 - not available, 1 - available - * \return '0' on success, otherwise value >'0'. - */ -extern uint8_t lib_most_volume_node_available(uint16_t address, uint8_t available); - -/** Shall be called either cyclically (e.g. 50ms -> polling) or after "timeout" - * when "service_fptr" is fired (-> event triggered). - * \return '0' on success, otherwise value >'0'. - */ -extern uint8_t lib_most_volume_service(void); - -#ifdef __cplusplus -} -#endif - -#endif /* LIB_MOST_VOLUME_H */ - diff --git a/MOST_UNICENS/ucs2-vol/inc/setup.h b/MOST_UNICENS/ucs2-vol/inc/setup.h deleted file mode 100644 index 3be8bf4..0000000 --- a/MOST_UNICENS/ucs2-vol/inc/setup.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#ifndef SETUP_H -#define SETUP_H - -#include "libmostvolume.h" -#include "device_value.h" -#include "device_container.h" - -#define MAX_CHANNELS (LIB_MOST_VOLUME_MASTER + 1u) -#define MAX_MASTERS 3u - -class CSetup { - -public: - void Configure(lib_most_volume_init_t *init_ptr); - void SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume); - void Update(); - void SetNodeAvailable(uint16_t address, bool available); - -private: - CDeviceValue _volume_amp_270_m; - CDeviceValue _volume_amp_270_l; - CDeviceValue _volume_amp_270_r; - - CDeviceValue _volume_amp_271_m; - CDeviceValue _volume_amp_271_l; - CDeviceValue _volume_amp_271_r; - - CDeviceValue _volume_amp_272_m; - CDeviceValue _volume_amp_272_l; - CDeviceValue _volume_amp_272_r; - - CDeviceValue _volume_amp_510_m; - - CDeviceContainer _value_container; - lib_most_volume_init_t init_data; - -public: - static CSetup* GetInstance(); // singleton - static void Release(); // singleton - -protected: - CSetup(); // singleton - virtual ~CSetup(); // singleton - -private: - static CSetup* _instance; // singleton -}; - -#endif /* SETUP_H */ - diff --git a/MOST_UNICENS/ucs2-vol/src/CMakeLists.txt b/MOST_UNICENS/ucs2-vol/src/CMakeLists.txt deleted file mode 100644 index 1be7184..0000000 --- a/MOST_UNICENS/ucs2-vol/src/CMakeLists.txt +++ /dev/null @@ -1,39 +0,0 @@ -########################################################################### -# Copyright 2015, 2016, 2017 IoT.bzh -# -# author: Fulup Ar Foll <fulup@iot.bzh> -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -########################################################################### - -# Add target to project dependency list -PROJECT_TARGET_ADD(ucs2-volume) - -# Define targets source files -ADD_LIBRARY(${TARGET_NAME} STATIC device_container.cpp device_value.cpp libmostvolume.cpp setup.cpp) - - # Library properties - SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES - OUTPUT_NAME ${TARGET_NAME} - ) - - # Library dependencies from PKG_REQUIRED_LIST - #TARGET_LINK_LIBRARIES(ucs2-volume # Library dependencies (include updates automatically) - # ${link_libraries} - #) - - # Define properties to expose when others use this target - TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME} - PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/../inc - ) - diff --git a/MOST_UNICENS/ucs2-vol/src/device_container.cpp b/MOST_UNICENS/ucs2-vol/src/device_container.cpp deleted file mode 100644 index 3448a23..0000000 --- a/MOST_UNICENS/ucs2-vol/src/device_container.cpp +++ /dev/null @@ -1,194 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#include <stddef.h> -#include "device_container.h" - -#define DEVCONT_TIME_RETRIGGER (uint16_t)30U -#define DEVCONT_TIME_NOW (uint16_t)0U -#define DEVCONT_TIME_STOP (uint16_t)0xFFFFU - -#define DEVCONT_UNUSED(a) (a = a) - -CDeviceContainer::CDeviceContainer() -{ - this->_idx_processing = 0U; - this->_values_pptr = NULL; - this->_values_sz = 0U; - this->_tx_busy = false; - this->_service_requested = false; - this->_init_ptr = NULL; -} - -CDeviceContainer::~CDeviceContainer() -{ - /*Clb_RegisterI2CResultCB(NULL, NULL);*/ /* avoid that the result callback is fired after object is destroyed */ -} - -void CDeviceContainer::RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz) -{ - this->_idx_processing = 0U; - this->_values_pptr = list_pptr; - this->_values_sz = list_sz; - this->_tx_busy = false; - - if ((list_pptr != NULL) && (list_sz > 0U)) - { - this->_idx_processing = (uint16_t)(list_sz - 1U); - } -} - -void CDeviceContainer::ClearValues() -{ - this->_idx_processing = 0U; - this->_values_pptr = NULL; - this->_values_sz = 0U; - this->_tx_busy = false; -} - -void CDeviceContainer::SetValue(uint16_t key, uint8_t value) -{ - uint16_t idx; - bool req_update = false; - - for (idx = 0U; idx < this->_values_sz; idx++) - { - if (this->_values_pptr[idx]->GetKey() == key) - { - this->_values_pptr[idx]->SetValue(value); - if (this->_values_pptr[idx]->RequiresUpdate()) - { - req_update = true; - } - } - } - - if (req_update && (!this->_tx_busy)) - { - RequestService(DEVCONT_TIME_NOW); //fire callback - } -} - -void CDeviceContainer::IncrementProcIndex(void) -{ - if ((_idx_processing + 1U) >= this->_values_sz) - { - _idx_processing = 0U; - } - else - { - _idx_processing++; - } -} - -// starts at latest position, searches next value to update, waits until response -void CDeviceContainer::Update() -{ - uint16_t cnt; - bool error = false; - _service_requested = false; - - if (this->_tx_busy) - { - return; - } - - for (cnt = 0u; cnt < this->_values_sz; cnt++) /* just run one cycle */ - { - IncrementProcIndex(); - - if (_values_pptr[_idx_processing]->RequiresUpdate()) - { - if (_values_pptr[_idx_processing]->GetType() == DEVICE_VAL_FIBERDYNE_MASTER) - { - _values_pptr[_idx_processing]->FireControlMessage(this->_init_ptr->sendmsg_cb); - } - else - { - if (_values_pptr[_idx_processing]->FireUpdateMessage(this->_init_ptr->writei2c_cb, - &OnI2cResult, - this)) - { - this->_tx_busy = true; - error = false; - break; - } - else - { - error = true; - break; - } - } - } - } - - if (error) - { - RequestService(DEVCONT_TIME_RETRIGGER); - } -} - -void CDeviceContainer::HandleI2cResult(uint8_t result) -{ - this->_tx_busy = false; - if (result == 0) - this->RequestService(DEVCONT_TIME_NOW); - else - this->RequestService(DEVCONT_TIME_RETRIGGER); -} - -void CDeviceContainer::OnI2cResult(uint8_t result, void *obj_ptr) -{ - ((CDeviceContainer*)obj_ptr)->HandleI2cResult(result); -} - -void CDeviceContainer::RequestService(uint16_t timeout) -{ - if (!_service_requested) - { - _service_requested = true; - - if (this->_init_ptr && this->_init_ptr->service_cb) - { - this->_init_ptr->service_cb(timeout); - } - } -} - -void CDeviceContainer::ChangeNodeAvailable(uint16_t address, bool available) -{ - uint16_t idx; - - for (idx = 0U; idx < this->_values_sz; idx++) - { - if (this->_values_pptr[idx]->GetAddress() == address) - { - this->_values_pptr[idx]->SetAvailable(available); - } - } - - if (available) - { - RequestService(DEVCONT_TIME_RETRIGGER); - } -} diff --git a/MOST_UNICENS/ucs2-vol/src/device_value.cpp b/MOST_UNICENS/ucs2-vol/src/device_value.cpp deleted file mode 100644 index 22b8dfb..0000000 --- a/MOST_UNICENS/ucs2-vol/src/device_value.cpp +++ /dev/null @@ -1,175 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ -#include <stddef.h> -#include "device_value.h" -#include "setup.h" - -#define MUTE_VALUE 0x03FFU -#define MUTE_VALUE_HB 0x03U -#define MUTE_VALUE_LB 0xFFU - -#define CONTROL_MASTER 0x07U -#define CONTROL_CH_1 0x08U -#define CONTROL_CH_2 0x09U - -CDeviceValue::CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key, bool is_i2c) -{ - this->_is_available = false; - this->_is_busy = false; - this->_address = address; - this->_is_i2c = is_i2c; - this->_target_value = 0x01u; - this->_actual_value = 0x01u; - - this->_result_fptr = NULL; - this->_result_user_ptr = NULL; - - this->_type = type; - this->_key = key; - - _tx_payload[0] = CONTROL_MASTER;// 7: master, 8: channel 1, 9: Channel 2 - _tx_payload[1] = MUTE_VALUE_HB; //HB:Volume - _tx_payload[2] = MUTE_VALUE_LB; //LB:Volume - - if (type == DEVICE_VAL_FIBERDYNE_MASTER) - _tx_payload_sz = 2u; - else - _tx_payload_sz = 3u; -} - -CDeviceValue::~CDeviceValue() -{ -} - -void CDeviceValue::ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[]) -{ - uint16_t tmp = MUTE_VALUE; - - if (type == DEVICE_VAL_FIBERDYNE_MASTER) - { - tx_payload[0] = 0x00U; - tx_payload[1] = value; - - return; - } - - switch (type) - { - case DEVICE_VAL_LEFT: - tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU))); - //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF)); - //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF)); - tx_payload[0] = CONTROL_CH_1; - break; - case DEVICE_VAL_RIGHT: - tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU))); - //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF)); - //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF)); - tx_payload[0] = CONTROL_CH_2; - break; - default: - /*std::cerr << "CDeviceValue::ApplyMostValue() error matching incorrect" << std::endl;*/ - case DEVICE_VAL_MASTER: - tmp = (uint16_t)(0x100U + 0x2FFU - (0x2FFU * ((int32_t)value) / (0xFFU))); - tx_payload[0] = CONTROL_MASTER; - break; - } - - tx_payload[1] = (uint8_t)((tmp >> 8U) & (uint16_t)0xFFU); //HB:Volume - tx_payload[2] = (uint8_t)(tmp & (uint16_t)0xFFU); //LB:Volume -} - -// returns true if target is not actual value -bool CDeviceValue::RequiresUpdate() -{ - if (this->_is_available && !this->_is_busy && (this->_target_value != this->_actual_value)) - { - return true; - } - - return false; -} - -bool CDeviceValue::FireControlMessage(lib_most_volume_sendmessage_cb_t sendmsg_fptr) -{ - ApplyMostValue(this->_target_value, _type, _tx_payload); - - if (this->_is_available && !this->_is_busy) - { - sendmsg_fptr(this->_address, 0x100U, _tx_payload, _tx_payload_sz); - - this->_actual_value = this->_target_value; - } - - return true; -} - -bool CDeviceValue::FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr, - lib_most_volume_writei2c_result_cb_t result_fptr, - void *result_user_ptr) -{ - int ret = -1; - ApplyMostValue(this->_target_value, _type, _tx_payload); - - if (this->_is_available && !this->_is_busy) - { - ret = writei2c_fptr(this->_address, &_tx_payload[0], _tx_payload_sz, - &OnI2cResult, - this); - - if (ret == 0) - { - this->_transmitted_value = this->_target_value; - this->_is_busy = true; - this->_result_fptr = result_fptr; - this->_result_user_ptr = result_user_ptr; - return true; - } - } - - return false; -} - -void CDeviceValue::HandleI2cResult(uint8_t result) -{ - if (result == 0) - { - /* transmission succeeded - now apply transmitted value */ - this->_actual_value = this->_transmitted_value; - } - - if (this->_result_fptr) - { - /* notify container */ - this->_result_fptr(result, this->_result_user_ptr); - } - - this->_result_fptr = NULL; - this->_result_user_ptr = NULL; - this->_is_busy = false; -} - -void CDeviceValue::OnI2cResult(uint8_t result, void *obj_ptr) -{ - ((CDeviceValue*)obj_ptr)->HandleI2cResult(result); -} diff --git a/MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp b/MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp deleted file mode 100644 index 35f769f..0000000 --- a/MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp +++ /dev/null @@ -1,101 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ - -#include "libmostvolume.h" -#include "setup.h" -#include <afb/afb-binding.h> -/*#include <iostream>*/ - -static bool _running = false; - -extern "C" uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr) -{ - uint8_t success = 1U; - /*std::cerr << "lib_most_volume_init(): called" << std::endl;*/ - - if (!_running && init_ptr) - { - CSetup::GetInstance()->Configure(init_ptr); - success = 0U; - _running = true; - } - - return success; -} - -extern "C" uint8_t lib_most_volume_exit(void) -{ - uint8_t success = 1U; - /*std::cerr << "lib_most_volume_exit(): called" << std::endl;*/ - - if (_running) - { - CSetup::Release(); - success = 0U; - _running = false; - } - - return success; -} - -extern "C" uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume) -{ - uint8_t success = 1U; - /*std::cerr << "lib_most_volume_set(): channel=" << channel << ", volume=" << (int)volume << std::endl;*/ - AFB_NOTICE("lib_most_volume_set"); - - if (_running) - { - CSetup::GetInstance()->SetVolume(channel, volume); - success = 0U; - } - - return success; -} - -extern uint8_t lib_most_volume_node_available(uint16_t address, uint8_t available) -{ - uint8_t success = 1U; - - if (_running) - { - CSetup::GetInstance()->SetNodeAvailable(address, available); - success = 0U; - } - - return success; -} - -extern "C" uint8_t lib_most_volume_service(void) -{ - uint8_t success = 1U; - /*std::cerr << "lib_most_volume_service(): called" << std::endl;*/ - - if (_running) - { - CSetup::GetInstance()->Update(); - success = 0U; - } - - return success; -} diff --git a/MOST_UNICENS/ucs2-vol/src/setup.cpp b/MOST_UNICENS/ucs2-vol/src/setup.cpp deleted file mode 100644 index ad841ab..0000000 --- a/MOST_UNICENS/ucs2-vol/src/setup.cpp +++ /dev/null @@ -1,96 +0,0 @@ -/* - * libmostvolume example - * - * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * You may also obtain this software under a propriety license from Microchip. - * Please contact Microchip for further information. - * - */ -#include <stddef.h> -#include "setup.h" - -CSetup* CSetup::_instance = NULL; - -// singleton -CSetup* CSetup::GetInstance() { - if (_instance == NULL) { - _instance = new CSetup(); - } - - return _instance; -} - -// singleton -void CSetup::Release() { - if (_instance != NULL) { - delete _instance; - } - _instance = NULL; -} - -CSetup::CSetup() - : _volume_amp_270_m(0x270U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER, true), - _volume_amp_270_l(0x270U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_FRONT_LEFT, true), - _volume_amp_270_r(0x270U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_FRONT_RIGHT, true), - _volume_amp_271_m(0x271U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER, true), - _volume_amp_271_l(0x271U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_REAR_LEFT, true), - _volume_amp_271_r(0x271U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_REAR_RIGHT, true), - _volume_amp_272_m(0x272U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER, true), - _volume_amp_272_l(0x272U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_CENTER, true), - _volume_amp_272_r(0x272U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_SUB, true), - _volume_amp_510_m(0x510U, DEVICE_VAL_FIBERDYNE_MASTER, LIB_MOST_VOLUME_MASTER, false), - _value_container() -{ - static CDeviceValue* value_list[10] = { &_volume_amp_270_m, - &_volume_amp_270_l, - &_volume_amp_270_r, - &_volume_amp_271_m, - &_volume_amp_271_l, - &_volume_amp_271_r, - &_volume_amp_272_m, - &_volume_amp_272_l, - &_volume_amp_272_r, - &_volume_amp_510_m}; - - _value_container.RegisterValues(value_list, 10U); -} - -CSetup::~CSetup() -{ - -} - -void CSetup::Configure(lib_most_volume_init_t *init_ptr) -{ - this->init_data = *init_ptr; - _value_container.AssignService(&this->init_data); -} - -void CSetup::SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume) -{ - _value_container.SetValue((uint16_t)channel, volume); -} - -void CSetup::Update() -{ - _value_container.Update(); -} - -void CSetup::SetNodeAvailable(uint16_t address, bool available) -{ - _value_container.ChangeNodeAvailable(address, available); -} diff --git a/MOST_UNICENS/wrap_unicens.c b/MOST_UNICENS/wrap_unicens.c deleted file mode 100644 index 4b75780..0000000 --- a/MOST_UNICENS/wrap_unicens.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. - * Author Tobias Jahnke - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - */ -#define _GNU_SOURCE -#define AFB_BINDING_VERSION 2 - -#include <string.h> -#include <json-c/json.h> -#include <afb/afb-binding.h> -#include "wrap_unicens.h" -#include "wrap-json.h" - -typedef struct async_job_ { - wrap_ucs_result_cb_t result_fptr; - void *result_user_ptr; -} async_job_t; - -typedef struct parse_result_ { - int done; - char *str_result; -} parse_result_t; - -/* Subscribes to unicens2-binding events. - * \return Returns 0 if successful, otherwise != 0". - */ -extern int wrap_ucs_subscribe_sync() { - - json_object *j_response, *j_query = NULL; - int err; - - /* Build an empty JSON object */ - err = wrap_json_pack(&j_query, "{}"); - if (err) { - AFB_ERROR("Failed to create subscribe json object"); - goto OnErrorExit; - } - - err = afb_service_call_sync("UNICENS", "subscribe", j_query, &j_response); - if (err) { - AFB_ERROR("Fail subscribing to UNICENS events"); - goto OnErrorExit; - } - else { - AFB_NOTICE("Subscribed to UNICENS events, res=%s", json_object_to_json_string(j_response)); - json_object_put(j_response); - } - json_object_put(j_query); - j_query = NULL; - -OnErrorExit: - if (j_query) - json_object_put(j_query); - return err; -} - -/* Checks if name ends with a given letter. */ -static int wrap_ucs_string_ends_with(const char *name, char letter) { - - int result = 0; - size_t len = strlen(name); - - if (len > 0) { - - if (name[len] == letter) { - result = 1; - } - } - - return result; -} - -/* Callback for iteration through found files. Marks search as "done" as - * soon as the search pattern "kit.xml" matches. - * \param closure User reference. Points to parse_result_t. - * \param j_obj Points to json object within array. - */ -static void wrap_ucs_find_xml_cb(void *closure, struct json_object *j_obj) { - - const char *dir, *name; - parse_result_t *result; - - if (!closure) - return; - - result = (parse_result_t *)closure; - if (result->done) - return; - - wrap_json_unpack(j_obj, "{s:s, s:s}", "dirpath", &dir, "basename", &name); - AFB_DEBUG("Found file: %s", name); - - if(strstr(name, "kit.xml") != NULL) { - size_t sz = strlen(dir)+strlen(name)+10; - char * full_path = malloc(sz); - - strncpy(full_path, dir, sz); - - if (!wrap_ucs_string_ends_with(dir, '/')) - strncat(full_path, "/", sz); - - strncat(full_path, name, sz); - AFB_DEBUG("Found XML file: %s", full_path); - - result->done = 1; - result->str_result = full_path; - } -} - -/* Retrieves XML configuration path to initialize unicens2-binding. - * \param config_path Directory containing XML configuration file(s). - * \param file_found Points to found file_path or NULL if not found. - * Memory must be released by calling free(). - * \return Returns 0 if successful, otherwise != 0". - */ -extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found) { - - int err = 0; - json_object *j_response, *j_query, *j_paths = NULL; - parse_result_t result = {.done = 0, .str_result = NULL}; - - *file_found = NULL; - - /* Build JSON object to retrieve UNICENS configuration */ - if ((config_path == NULL) || (strcmp(config_path, "") == 0)) - err = wrap_json_pack(&j_query, "{}"); - else - err = wrap_json_pack(&j_query, "{s:s}", "cfgpath", config_path); - - if (err) { - AFB_ERROR("Failed to create listconfig json object"); - goto OnErrorExit; - } - - err = afb_service_call_sync("UNICENS", "listconfig", j_query, &j_response); - if (err) { - AFB_ERROR("Failed to call listconfig"); - goto OnErrorExit; - } - else { - AFB_DEBUG("UNICENS listconfig result, res=%s", json_object_to_json_string(j_response)); - - if (json_object_object_get_ex(j_response, "response", &j_paths)) { - - AFB_DEBUG("UNICENS listconfig result, paths=%s", json_object_to_json_string(j_paths)); - - wrap_json_optarray_for_all(j_paths, &wrap_ucs_find_xml_cb, &result); - - if (result.done) { - *file_found = strdup(result.str_result); - free(result.str_result); - result.str_result = NULL; - } - else { - AFB_NOTICE("wrap_ucs_getconfig_sync, search pattern does not match for paths=%s", json_object_to_json_string(j_paths)); - err = -1; - } - } - - json_object_put(j_response); - } - json_object_put(j_query); - j_query = NULL; - -OnErrorExit: - if (j_query) - json_object_put(j_query); - return err; -} - -/* Initializes the unicens2-binding. - * \param file_name Path to XML configuration file or \c NULL for - * first found file in default path. - * \return Returns 0 if successful, otherwise != 0". - */ -extern int wrap_ucs_initialize_sync(const char *file_name) { - json_object *j_response, *j_query = NULL; - int err; - - /* Build JSON object to initialize UNICENS */ - if (file_name != NULL) - err = wrap_json_pack(&j_query, "{s:s}", "filename", file_name); - else - err = wrap_json_pack(&j_query, "{}"); - - if (err) { - AFB_ERROR("Failed to create initialize json object"); - goto OnErrorExit; - } - err = afb_service_call_sync("UNICENS", "initialise", j_query, &j_response); - if (err) { - AFB_ERROR("Failed to initialize UNICENS"); - goto OnErrorExit; - } - else { - AFB_NOTICE("Initialized UNICENS, res=%s", json_object_to_json_string(j_response)); - json_object_put(j_response); - } - - json_object_put(j_query); - j_query = NULL; - -OnErrorExit: - if (j_query) - json_object_put(j_query); - return err; -} - -/* Write I2C command to a network node. - * \param node Node address - * \param data_ptr Reference to command data - * \param data_sz Size of the command data. Valid values: 1..32. - * \return Returns 0 if successful, otherwise != 0". - */ -extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz) { - - json_object *j_response, *j_query, *j_array = NULL; - int err; - uint8_t cnt; - - j_query = json_object_new_object(); - j_array = json_object_new_array(); - - if (!j_query || !j_array) { - err = -1; - AFB_ERROR("Failed to create writei2c json objects"); - goto OnErrorExit; - } - - for (cnt = 0U; cnt < data_sz; cnt++) { - json_object_array_add(j_array, json_object_new_int(data_ptr[cnt])); - } - - json_object_object_add(j_query, "node", json_object_new_int(node)); - json_object_object_add(j_query, "data", j_array); - - err = afb_service_call_sync("UNICENS", "writei2c", j_query, &j_response); - - if (err) { - AFB_ERROR("Failed to call writei2c_sync"); - goto OnErrorExit; - } - else { - AFB_INFO("Called writei2c_sync, res=%s", json_object_to_json_string(j_response)); - json_object_put(j_response); - } - - json_object_put(j_query); - j_query = NULL; - -OnErrorExit: - if (j_query) - json_object_put(j_query); - return err; -} - -/* ------------------ ASYNCHRONOUS API ---------------------------------------*/ - -static void wrap_ucs_i2cwrite_cb(void *closure, int status, struct json_object *j_result) { - - AFB_INFO("wrap_ucs_i2cwrite_cb: closure=%p status=%d, res=%s", closure, status, json_object_to_json_string(j_result)); - - if (closure) { - async_job_t *job_ptr = (async_job_t *)closure; - - if (job_ptr->result_fptr) - job_ptr->result_fptr((uint8_t)abs(status), job_ptr->result_user_ptr); - - free(closure); - } -} - -/* Write I2C command to a network node. - * \param node Node address - * \param data_ptr Reference to command data - * \param data_sz Size of the command data. Valid values: 1..32. - * \return Returns 0 if successful, otherwise != 0". - */ -extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz, - wrap_ucs_result_cb_t result_fptr, - void *result_user_ptr) { - - json_object *j_query, *j_array = NULL; - async_job_t *job_ptr = NULL; - int err; - uint8_t cnt; - - j_query = json_object_new_object(); - j_array = json_object_new_array(); - - if (!j_query || !j_array) { - err = -1; - AFB_ERROR("Failed to create writei2c json objects"); - goto OnErrorExit; - } - - for (cnt = 0U; cnt < data_sz; cnt++) { - json_object_array_add(j_array, json_object_new_int(data_ptr[cnt])); - } - - json_object_object_add(j_query, "node", json_object_new_int(node)); - json_object_object_add(j_query, "data", j_array); - - job_ptr = malloc(sizeof(async_job_t)); - - if (!job_ptr) { - err = -1; - AFB_ERROR("Failed to create async job object"); - goto OnErrorExit; - } - - job_ptr->result_fptr = result_fptr; - job_ptr->result_user_ptr = result_user_ptr; - - afb_service_call("UNICENS", "writei2c", j_query, wrap_ucs_i2cwrite_cb, job_ptr); - err = 0; - j_query = NULL; - -OnErrorExit: - if (j_query) - json_object_put(j_query); - return err; -} - -extern int wrap_ucs_sendmessage(uint16_t src_addr, uint16_t msg_id, uint8_t *data_ptr, uint8_t data_sz) { - - json_object *j_query, *j_response = NULL; - int err; - int node = (int)src_addr; - int msgid = (int)msg_id; - size_t data_size = (size_t)data_sz; - - /* skip data attribute if possible, wrap_json_unpack may fail to deal with - * an empty Base64 string */ - if (data_size > 0) - wrap_json_pack(&j_query, "{s:i, s:i, s:Y}", "node", node, "msgid", msgid, "data", data_ptr, data_size); - else - wrap_json_pack(&j_query, "{s:i, s:i}", "node", node, "msgid", msgid); - - err = afb_service_call_sync("UNICENS", "sendmessage", j_query, &j_response); - - if (err) { - AFB_ERROR("Failed to call wrap_ucs_sendmessage"); - goto OnErrorExit; - } - else { - AFB_INFO("Called wrap_ucs_sendmessage, res=%s", json_object_to_json_string(j_response)); - json_object_put(j_response); - } - - j_query = NULL; - -OnErrorExit: - return err; -} diff --git a/MOST_UNICENS/wrap_unicens.h b/MOST_UNICENS/wrap_unicens.h deleted file mode 100644 index 734ea5d..0000000 --- a/MOST_UNICENS/wrap_unicens.h +++ /dev/null @@ -1,35 +0,0 @@ -/*
- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
- * Author Tobias Jahnke
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#pragma once
-#include <stdint.h>
-
-/* Asynchronous API: result callback */
-typedef void (*wrap_ucs_result_cb_t)(uint8_t result, void *user_ptr);
-
-/* Asynchronous API: functions */
-extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz,
- wrap_ucs_result_cb_t result_fptr,
- void *result_user_ptr);
-
-/* Synchronous API: functions */
-extern int wrap_ucs_subscribe_sync();
-extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found);
-extern int wrap_ucs_initialize_sync(const char* file_name);
-extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz);
-extern int wrap_ucs_sendmessage(uint16_t src_addr, uint16_t msg_id, uint8_t *data_ptr, uint8_t data_sz);
diff --git a/MOST_UNICENS/wrap_volume.c b/MOST_UNICENS/wrap_volume.c deleted file mode 100644 index 9f9ceff..0000000 --- a/MOST_UNICENS/wrap_volume.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. - * Author Tobias Jahnke - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - */ -#define _GNU_SOURCE -#define AFB_BINDING_VERSION 2 - -#include <string.h> -#include <time.h> -#include <assert.h> -#include <json-c/json.h> -#include <afb/afb-binding.h> - -#include "wrap_volume.h" -#include "wrap_unicens.h" -#include "libmostvolume.h" - -static int wrap_volume_service_timeout_cb(sd_event_source* source, - uint64_t timer __attribute__((__unused__)), - void *userdata __attribute__((__unused__))) { - - uint8_t ret; - - sd_event_source_unref(source); - ret = lib_most_volume_service(); - - if (ret != 0U) { - AFB_ERROR("lib_most_volume_service returns %d", ret); - } - - return 0; -} - -static void wrap_volume_service_cb(uint16_t timeout) { - uint64_t usec; - sd_event_now(afb_daemon_get_event_loop(), CLOCK_BOOTTIME, &usec); - sd_event_add_time( afb_daemon_get_event_loop(), NULL, CLOCK_MONOTONIC, - usec + (timeout*1000), - 250, - wrap_volume_service_timeout_cb, - NULL); -} - -/* Retrieves a new value adapted to a new maximum value. Minimum value is - * always zero. */ -static int wrap_volume_calculate(int value, int max_old, int max_new) { - - if (value > max_old) - value = max_old; - - value = (value * max_new) / max_old; /* calculate range: 0..255 */ - assert(value <= max_new); - - return value; -} - -extern int wrap_volume_init(void) { - - uint8_t ret = 0U; - lib_most_volume_init_t mv_init; - - mv_init.writei2c_cb = &wrap_ucs_i2cwrite; - mv_init.service_cb = &wrap_volume_service_cb; - mv_init.sendmsg_cb = &wrap_ucs_sendmessage; - - ret = lib_most_volume_init(&mv_init); - - return ret * (-1); -} - -extern int wrap_volume_master(int volume) { - - int new_value, ret; - - new_value = wrap_volume_calculate(volume, 100, 255); - ret = lib_most_volume_set(LIB_MOST_VOLUME_MASTER, (uint8_t)new_value); - - if (ret != 0) { - AFB_ERROR("wrap_volume_master: volume library not ready."); - ret = ret * (-1); /* make return value negative */ - } - - return ret; -} - -extern int wrap_volume_pcm(int *volume_ptr, int volume_sz) { - - const int MAX_PCM_CHANNELS = 6; - int cnt, ret; - assert(volume_ptr != NULL); - assert(volume_sz <= MAX_PCM_CHANNELS); - - for (cnt = 0; cnt < volume_sz; cnt ++) { - - int new_value = wrap_volume_calculate(volume_ptr[cnt], 100, 255); - ret = lib_most_volume_set((enum lib_most_volume_channel_t)cnt, (uint8_t)new_value); - - if (ret != 0) { - AFB_ERROR("wrap_volume_pcm: volume library not ready."); - ret = ret * (-1); /* make return value negative */ - break; - } - } - - return ret; -} - -extern int wrap_volume_node_avail(int node, int available) { - - int ret; - ret = lib_most_volume_node_available((uint16_t)node, (uint8_t)available); - - if (ret != 0) { - AFB_ERROR("wrap_volume_node_avail: volume library not ready."); - ret = ret * (-1); /* make return value negative */ - } - - return ret; -} - diff --git a/MOST_UNICENS/wrap_volume.h b/MOST_UNICENS/wrap_volume.h deleted file mode 100644 index 099b70c..0000000 --- a/MOST_UNICENS/wrap_volume.h +++ /dev/null @@ -1,26 +0,0 @@ -/*
- * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
- * Author Tobias Jahnke
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#pragma once
-#include <stdint.h>
-#include <systemd/sd-event.h>
-
-extern int wrap_volume_init(void);
-extern int wrap_volume_master(int volume);
-extern int wrap_volume_pcm(int *volume_ptr, int volume_sz);
-extern int wrap_volume_node_avail(int node, int available);
|