diff options
20 files changed, 2939 insertions, 0 deletions
diff --git a/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt new file mode 100644 index 0000000..b7740f0 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/CMakeLists.txt @@ -0,0 +1,49 @@ +########################################################################### +# Copyright 2015, 2016, 2017 IoT.bzh +# +# author: Fulup Ar Foll <fulup@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +########################################################################### + +ADD_SUBDIRECTORY(ucs2-vol) + +# Add target to project dependency list +PROJECT_TARGET_ADD(hal-most-unicens) + + # Define project Targets + ADD_LIBRARY(hal-most-unicens MODULE hal_most_unicens.c wrap-json.c wrap_unicens.c wrap_volume.c) + + # Binder exposes a unique public entry point + SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES + PREFIX "afb-" + LABELS "BINDING" + LINK_FLAGS ${BINDINGS_LINK_FLAG} + OUTPUT_NAME ${TARGET_NAME} + ) + + # Library dependencies (include updates automatically) + TARGET_LINK_LIBRARIES(${TARGET_NAME} + hal-interface + audio-common + ucs2-volume + ) + + # installation directory + INSTALL(TARGETS ${TARGET_NAME} + LIBRARY DESTINATION ${BINDINGS_INSTALL_DIR}) + + # Define properties to expose when others use this target + TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME} + PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/ucs2-vol/inc + ) diff --git a/HAL-afb/HAL_MOST_UNICENS/README.md b/HAL-afb/HAL_MOST_UNICENS/README.md new file mode 100644 index 0000000..a0cc190 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/README.md @@ -0,0 +1,51 @@ + +# HAL for MOST Sound Card + +## Introduction +This Hardware Abstraction Layer (HAL) is intended to control MOST audio via +standard ALSA mixer controls. Therefore the HAL add's controls to the MOST sound +card. Modification of the mixer controls is mapped to control commands which are +send to MOST nodes. + +The HAL requires to access the UNICENS V2 binding which is setting up the MOST +network and the MOST node. + +Please check the following required components: +* MOST Linux Driver +* User must be member of "audio" group +* UNICENS V2 binding +* [K2L MOST150 Audio 5.1 Kit](https://www.k2l.de/products/74/MOST150%20Audio%205.1%20Kit/) + +## Possible Modifications +Check if you need to adapt the default path for UNICENS configuration, e.g. +``` +#define XML_CONFIG_PATH "/opt/AGL/unicens2-binding/config_multichannel_audio_kit.xml" +``` + +Check if you need to adapt the name of the MOST sound card. +``` +#define ALSA_CARD_NAME "Microchip MOST:1" +``` + +You can check your MOST sound card name by calling ```aplay -l```, e.g. +``` +aplay -l +**** List of PLAYBACK Hardware Devices **** +card 0: PCH [HDA Intel PCH], device 0: 92HD90BXX Analog [92HD90BXX Analog] + Subdevices: 1/1 + Subdevice #0: subdevice #0 +card 1: ep016ch [Microchip MOST:1], device 0: ep01-6ch [] + Subdevices: 1/1 + Subdevice #0: subdevice #0 +card 2: ep022ch [Microchip MOST:2], device 0: ep02-2ch [] + Subdevices: 1/1 + Subdevice #0: subdevice #0 + +``` +Choose the first sound card with 6 channels, e.g. if you see ```ep01-6ch``` just +take ```Microchip MOST:1```. + +If you get messed up with card enumeration the following action may help: +- Unplug your MOST USB hardware from target +- Call ```sudo rm /var/lib/alsa/asound.state``` +- Connect MOST USB hardware after reboot or restart of ALSA diff --git a/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c b/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c new file mode 100644 index 0000000..4405e61 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/hal_most_unicens.c @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. + * Author Tobias Jahnke + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ +#define _GNU_SOURCE +#include <string.h> +#include "hal-interface.h" +#include "audio-common.h" +#include "wrap-json.h" +#include "wrap_unicens.h" +#include "wrap_volume.h" + +#ifndef UCS2_CFG_PATH +# define UCS2_CFG_PATH "/home/agluser/DEVELOPMENT/AGL/BINDING/unicens2-binding/data" +#endif + +#define ALSA_CARD_NAME "Microchip MOST:1" +#define PCM_MAX_CHANNELS 6 + +static int master_volume; +static json_bool master_switch; +static int pcm_volume[PCM_MAX_CHANNELS]; + +void unicens_master_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { + + const char *j_str = json_object_to_json_string(j_obj); + + if (wrap_json_unpack(j_obj, "[i!]", &master_volume) == 0) { + AFB_NOTICE("master_volume: %s, value=%d", j_str, master_volume); + wrap_volume_master(master_volume); + } + else { + AFB_NOTICE("master_volume: INVALID STRING %s", j_str); + } +} + +void unicens_master_switch_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { + + const char *j_str = json_object_to_json_string(j_obj); + + if (wrap_json_unpack(j_obj, "[b!]", &master_switch) == 0) { + AFB_NOTICE("master_switch: %s, value=%d", j_str, master_switch); + } + else { + AFB_NOTICE("master_switch: INVALID STRING %s", j_str); + } +} + +void unicens_pcm_vol_cb(halCtlsTagT tag, alsaHalCtlMapT *control, void* handle, json_object *j_obj) { + + const char *j_str = json_object_to_json_string(j_obj); + + if (wrap_json_unpack(j_obj, "[iiiiii!]", &pcm_volume[0], &pcm_volume[1], &pcm_volume[2], &pcm_volume[3], + &pcm_volume[4], &pcm_volume[5]) == 0) { + AFB_NOTICE("pcm_vol: %s", j_str); + wrap_volume_pcm(pcm_volume, PCM_MAX_CHANNELS/*array size*/); + } + else { + AFB_NOTICE("pcm_vol: INVALID STRING %s", j_str); + } +} + +/* declare ALSA mixer controls */ +STATIC alsaHalMapT alsaHalMap[]= { + { .tag=Master_Playback_Volume, .cb={.callback=unicens_master_vol_cb, .handle=&master_volume}, .info="Sets master playback volume", + .ctl={.numid=1, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=1, .minval=0, .maxval=100, .step=1, .value=50, .name="Master Playback Volume"} + }, + /*{ .tag=Master_OnOff_Switch, .cb={.callback=unicens_master_switch_cb, .handle=&master_switch}, .info="Sets master playback switch", + .ctl={.numid=2, .type=SND_CTL_ELEM_TYPE_BOOLEAN, .count=1, .minval=0, .maxval=1, .step=1, .value=1, .name="Master Playback Switch"} + },*/ + { .tag=PCM_Playback_Volume, .cb={.callback=unicens_pcm_vol_cb, .handle=&pcm_volume}, .info="Sets PCM playback volume", + .ctl={.numid=3, .type=SND_CTL_ELEM_TYPE_INTEGER, .count=6, .minval=0, .maxval=100, .step=1, .value=100, .name="PCM Playback Volume"} + }, + { .tag=EndHalCrlTag} /* marker for end of the array */ +} ; + +/* HAL sound card mapping info */ +STATIC alsaHalSndCardT alsaHalSndCard = { + .name = ALSA_CARD_NAME, /* WARNING: name MUST match with 'aplay -l' */ + .info = "HAL for MICROCHIP MOST sound card controlled by UNICENS binding", + .ctls = alsaHalMap, + .volumeCB = NULL, /* use default volume normalization function */ +}; + +/* initializes ALSA sound card, UNICENS API */ +STATIC int unicens_service_init() { + int err = 0; + char *config_file = NULL; + AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING"); + + err = halServiceInit(afbBindingV2.api, &alsaHalSndCard); + if (err) { + AFB_ERROR("Cannot initialize ALSA soundcard."); + goto OnErrorExit; + } + + err= afb_daemon_require_api("UNICENS", 1); + if (err) { + AFB_ERROR("Failed to access UNICENS API"); + goto OnErrorExit; + } + + err = wrap_ucs_getconfig_sync(UCS2_CFG_PATH, &config_file); + if (err || (config_file == NULL)) { + AFB_ERROR("Failed to retrieve configuration"); + goto OnErrorExit; + } + else { + AFB_NOTICE("Found configuration: %s", config_file); + } + + err = wrap_ucs_subscribe_sync(); + if (err) { + AFB_ERROR("Failed to subscribe to UNICENS binding"); + goto OnErrorExit; + } + + err = wrap_ucs_initialize_sync(config_file); + free(config_file); + config_file = NULL; + + if (err) { + AFB_ERROR("Failed to initialize UNICENS binding"); + goto OnErrorExit; + } + + err = wrap_volume_init(); + if (err) { + AFB_ERROR("Failed to initialize wrapper for volume library"); + goto OnErrorExit; + } + +OnErrorExit: + AFB_NOTICE("Initializing HAL-MOST-UNICENS-BINDING done.."); + return err; +} + +// This receive all event this binding subscribe to +PUBLIC void unicens_event_cb(const char *evtname, json_object *j_event) { + + if (strncmp(evtname, "alsacore/", 9) == 0) { + halServiceEvent(evtname, j_event); + return; + } + + if (strncmp(evtname, "UNICENS/", 8) == 0) { + AFB_NOTICE("unicens_event_cb: evtname=%s [msg=%s]", evtname, json_object_get_string(j_event)); + return; + } + + AFB_NOTICE("unicens_event_cb: UNHANDLED EVENT, evtname=%s [msg=%s]", evtname, json_object_get_string(j_event)); +} + +/* API prefix should be unique for each snd card */ +PUBLIC const struct afb_binding_v2 afbBindingV2 = { + .api = "hal-most-unicens", + .init = unicens_service_init, + .verbs = halServiceApi, + .onevent = unicens_event_cb, +}; diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt new file mode 100644 index 0000000..8735677 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/CMakeLists.txt @@ -0,0 +1,26 @@ +########################################################################### +# Copyright 2015, 2016, 2017 IoT.bzh +# +# author: Fulup Ar Foll <fulup@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +########################################################################### + + + +# Define subproject targets +ADD_SUBDIRECTORY(src) + + + + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h new file mode 100644 index 0000000..5e3b753 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_container.h @@ -0,0 +1,59 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#ifndef DEVICECONTAINER_H +#define DEVICECONTAINER_H + +#include "device_value.h" +#include "libmostvolume.h" + +class CDeviceContainer { + +public: + CDeviceContainer(); + virtual ~CDeviceContainer(); + + void AssignService(lib_most_volume_init_t *init_ptr) {_init_ptr = init_ptr;} + + void RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz); + void SetValue(uint16_t key, uint8_t value); + void ClearValues(); + void Update(); + +private: + void RequestService(uint16_t timeout); + void IncrementProcIndex(void); + void HandleI2cResult(uint8_t result); + + static void OnI2cResult(uint8_t result, void *obj_ptr); + + uint16_t _idx_processing; + uint16_t _values_sz; + CDeviceValue **_values_pptr; + bool _tx_busy; + bool _service_requested; + lib_most_volume_init_t *_init_ptr; +}; + +#endif /* DEVICECONTAINER_H */ + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h new file mode 100644 index 0000000..21fdbdc --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/device_value.h @@ -0,0 +1,91 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#ifndef DEVICEVALUE_H +#define DEVICEVALUE_H + +#include <stdint.h> +#include "libmostvolume.h" + +struct SRxMessage { + uint32_t devInst; /*instance if multiple devices are using the same group id*/ + uint32_t sourceAddr; + uint32_t targetAddr; + uint32_t nFBlock; + uint32_t nInst; + uint32_t nFunc; + uint32_t nOpType; + const uint8_t *pPayload; + uint32_t payloadLen; +}; + +struct STxMessage { + uint32_t devInst; /*instance if multiple devices are using the same group id*/ + uint32_t targetAddr; + uint32_t nFBlock; + uint32_t nInst; + uint32_t nFunc; + uint32_t nOpType; + const uint8_t *pPayload; + uint32_t payloadLen; +}; + +enum DeviceValueType { + DEVICE_VAL_MASTER = 0, + DEVICE_VAL_LEFT = 1, + DEVICE_VAL_RIGHT = 2 + +}; + +class CDeviceValue { +public: + CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key); + virtual ~CDeviceValue(); + + uint16_t GetKey(){return _key;} + DeviceValueType GetType(){return _type;} // returns the assigned type + void SetValue(uint8_t value){_target_value = value;} // sets desired value + + bool RequiresUpdate(); // returns true if target is not actual value + // returns true if success, false if failed + // -> stop transmission + bool FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr, + lib_most_volume_writei2c_result_cb_t result_fptr, + void *result_user_ptr);// fires message & updates actual value + +private: + void HandleI2cResult(uint8_t result); + void ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[]); + + bool _is_initial; // ensure first update + DeviceValueType _type; // determines the remote i2c command + uint16_t _key; // lookup key + uint16_t _address; // target node/group address + uint8_t _target_value; // desired value + uint8_t _actual_value; // value set and confirmed via network + uint8_t _tx_payload[20]; + uint8_t _tx_payload_sz; +}; + +#endif /* DEVICEPROPERTY_H */ + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h new file mode 100644 index 0000000..1d7249d --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/libmostvolume.h @@ -0,0 +1,104 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#ifndef LIB_MOST_VOLUME_H +#define LIB_MOST_VOLUME_H + +#include <stdint.h> + + +#ifdef __cplusplus +extern "C" { +#endif + +/** Describes the volume control */ +enum lib_most_volume_channel_t{ + LIB_MOST_VOLUME_CH_FRONT_LEFT = 0, + LIB_MOST_VOLUME_CH_FRONT_RIGHT = 1, + LIB_MOST_VOLUME_CH_REAR_LEFT = 2, + LIB_MOST_VOLUME_CH_REAR_RIGHT = 3, + LIB_MOST_VOLUME_CH_CENTER = 4, + LIB_MOST_VOLUME_CH_SUB = 5, + LIB_MOST_VOLUME_MASTER = 6 +}; + +/** Is fired when the application shall call "lib_most_volume_service()" after a certain time + * \param timeout Time in ms after which the application shall call lib_most_volume_service(). + * Valid values: + * 0x0000: as soon as possible, + * 0x0001..0xFFFE: timeout in ms, + * 0xFFFF: never + */ +typedef void (*lib_most_volume_service_cb_t)(uint16_t timeout); + +typedef void (*lib_most_volume_writei2c_result_cb_t)(uint8_t result, void *user_ptr); + +/** Callback function required to write volume changes to network devices + * \param node The node address + * \param data_ptr I2C command data + * \param data_sz Size of the I2C command data + * \return Returns \c 0 for success, other value on failure. + */ +typedef int (*lib_most_volume_writei2c_cb_t)(uint16_t node, uint8_t *data_ptr, uint8_t data_sz, + lib_most_volume_writei2c_result_cb_t result_fptr, + void *result_user_ptr); + +typedef struct lib_most_volume_init_ { + lib_most_volume_service_cb_t service_cb; + lib_most_volume_writei2c_cb_t writei2c_cb; + +} lib_most_volume_init_t; + + +/** Initializes the library + * \param UNICENS_inst Reference to the UNICENS instance, created by the application. + * \param req_service_fptr Callback function which is fired if the application shall call + * lib_most_volume_service. + * \return '0' on success, otherwise value >'0'. + */ +extern uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr); + +/** Terminates the library + * \return '0' on success, otherwise value >'0'. + */ +extern uint8_t lib_most_volume_exit(void); + +/** Sets a single volume value. + * \param channel The volume control to be set. + * \param volume The volume value to be set. Valid values: 0..255. + * \return '0' on success, otherwise value >'0'. + */ +extern uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume); + +/** Shall be called either cyclically (e.g. 50ms -> polling) or after "timeout" + * when "service_fptr" is fired (-> event triggered). + * \return '0' on success, otherwise value >'0'. + */ +extern uint8_t lib_most_volume_service(void); + +#ifdef __cplusplus +} +#endif + +#endif /* LIB_MOST_VOLUME_H */ + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h new file mode 100644 index 0000000..63bc0e2 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/inc/setup.h @@ -0,0 +1,70 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#ifndef SETUP_H +#define SETUP_H + +#include "libmostvolume.h" +#include "device_value.h" +#include "device_container.h" + +#define MAX_CHANNELS (LIB_MOST_VOLUME_MASTER + 1u) +#define MAX_MASTERS 3u + +class CSetup { + +public: + void Configure(lib_most_volume_init_t *init_ptr); + void SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume); + void Update(); + +private: + CDeviceValue _volume_amp_270_m; + CDeviceValue _volume_amp_270_l; + CDeviceValue _volume_amp_270_r; + + CDeviceValue _volume_amp_271_m; + CDeviceValue _volume_amp_271_l; + CDeviceValue _volume_amp_271_r; + + CDeviceValue _volume_amp_272_m; + CDeviceValue _volume_amp_272_l; + CDeviceValue _volume_amp_272_r; + + CDeviceContainer _value_container; + lib_most_volume_init_t init_data; + +public: + static CSetup* GetInstance(); // singleton + static void Release(); // singleton + +protected: + CSetup(); // singleton + virtual ~CSetup(); // singleton + +private: + static CSetup* _instance; // singleton +}; + +#endif /* SETUP_H */ + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt new file mode 100644 index 0000000..1be7184 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/CMakeLists.txt @@ -0,0 +1,39 @@ +########################################################################### +# Copyright 2015, 2016, 2017 IoT.bzh +# +# author: Fulup Ar Foll <fulup@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +########################################################################### + +# Add target to project dependency list +PROJECT_TARGET_ADD(ucs2-volume) + +# Define targets source files +ADD_LIBRARY(${TARGET_NAME} STATIC device_container.cpp device_value.cpp libmostvolume.cpp setup.cpp) + + # Library properties + SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES + OUTPUT_NAME ${TARGET_NAME} + ) + + # Library dependencies from PKG_REQUIRED_LIST + #TARGET_LINK_LIBRARIES(ucs2-volume # Library dependencies (include updates automatically) + # ${link_libraries} + #) + + # Define properties to expose when others use this target + TARGET_INCLUDE_DIRECTORIES(${TARGET_NAME} + PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/../inc + ) + diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp new file mode 100644 index 0000000..cef25b1 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_container.cpp @@ -0,0 +1,166 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#include <stddef.h> +#include "device_container.h" + +#define DEVCONT_TIME_RETRIGGER (uint16_t)100U +#define DEVCONT_TIME_NOW (uint16_t)0U +#define DEVCONT_TIME_STOP (uint16_t)0xFFFFU + +#define DEVCONT_UNUSED(a) (a = a) + +CDeviceContainer::CDeviceContainer() +{ + this->_idx_processing = 0U; + this->_values_pptr = NULL; + this->_values_sz = 0U; + this->_tx_busy = false; + this->_service_requested = false; + this->_init_ptr = NULL; +} + +CDeviceContainer::~CDeviceContainer() +{ + /*Clb_RegisterI2CResultCB(NULL, NULL);*/ /* avoid that the result callback is fired after object is destroyed */ +} + +void CDeviceContainer::RegisterValues(CDeviceValue** list_pptr, uint16_t list_sz) +{ + this->_idx_processing = 0U; + this->_values_pptr = list_pptr; + this->_values_sz = list_sz; + this->_tx_busy = false; + + if ((list_pptr != NULL) && (list_sz > 0U)) + { + this->_idx_processing = (uint16_t)(list_sz - 1U); + } +} + +void CDeviceContainer::ClearValues() +{ + this->_idx_processing = 0U; + this->_values_pptr = NULL; + this->_values_sz = 0U; + this->_tx_busy = false; +} + +void CDeviceContainer::SetValue(uint16_t key, uint8_t value) +{ + uint16_t idx; + bool req_update = false; + + for (idx = 0U; idx < this->_values_sz; idx++) + { + if (this->_values_pptr[idx]->GetKey() == key) + { + this->_values_pptr[idx]->SetValue(value); + if (this->_values_pptr[idx]->RequiresUpdate()) + { + req_update = true; + } + } + } + + if (req_update && (!this->_tx_busy)) + { + RequestService(DEVCONT_TIME_NOW); //fire callback + } +} + +void CDeviceContainer::IncrementProcIndex(void) +{ + if ((_idx_processing + 1U) >= this->_values_sz) + { + _idx_processing = 0U; + } + else + { + _idx_processing++; + } +} + +// starts at latest position, searches next value to update, waits until response +void CDeviceContainer::Update() +{ + uint16_t cnt; + bool error = false; + _service_requested = false; + + if (this->_tx_busy) + { + return; + } + + for (cnt = 0u; cnt < this->_values_sz; cnt++) /* just run one cycle */ + { + IncrementProcIndex(); + + if (_values_pptr[_idx_processing]->RequiresUpdate()) + { + if (_values_pptr[_idx_processing]->FireUpdateMessage(this->_init_ptr->writei2c_cb, + &OnI2cResult, + this)) + { + /*Clb_RegisterI2CResultCB(&OnI2cResult, this);*/ + this->_tx_busy = true; + break; + } + else + { + error = true; + } + } + } + + if (error) + { + RequestService(DEVCONT_TIME_RETRIGGER); + } +} + +void CDeviceContainer::HandleI2cResult(uint8_t result) +{ + DEVCONT_UNUSED(result); + this->_tx_busy = false; + this->RequestService(DEVCONT_TIME_NOW); +} + +void CDeviceContainer::OnI2cResult(uint8_t result, void *obj_ptr) +{ + ((CDeviceContainer*)obj_ptr)->HandleI2cResult(result); +} + +void CDeviceContainer::RequestService(uint16_t timeout) +{ + if (!_service_requested) + { + _service_requested = true; + + if (this->_init_ptr && this->_init_ptr->service_cb) + { + this->_init_ptr->service_cb(timeout); + } + } +} diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp new file mode 100644 index 0000000..b8c681e --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/device_value.cpp @@ -0,0 +1,130 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#include "device_value.h" +#include "setup.h" + +#define MUTE_VALUE 0x03FFU +#define MUTE_VALUE_HB 0x03U +#define MUTE_VALUE_LB 0xFFU + +#define CONTROL_MASTER 0x07U +#define CONTROL_CH_1 0x08U +#define CONTROL_CH_2 0x09U + +CDeviceValue::CDeviceValue(uint16_t address, DeviceValueType type, uint16_t key) +{ + this->_is_initial = true; + this->_address = address; + this->_target_value = 0x01u; + this->_actual_value = 0x01u; + + this->_type = type; + this->_key = key; + + _tx_payload[0] = CONTROL_MASTER;// 7: master, 8: channel 1, 9: Channel 2 + _tx_payload[1] = MUTE_VALUE_HB; //HB:Volume + _tx_payload[2] = MUTE_VALUE_LB; //LB:Volume + _tx_payload_sz = 3u; +} + +CDeviceValue::~CDeviceValue() +{ +} + +void CDeviceValue::ApplyMostValue(uint8_t value, DeviceValueType type, uint8_t tx_payload[]) +{ + uint16_t tmp = MUTE_VALUE; + + switch (type) + { + case DEVICE_VAL_LEFT: + tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU))); + //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF)); + //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF)); + tx_payload[0] = CONTROL_CH_1; + break; + case DEVICE_VAL_RIGHT: + tmp = (uint16_t)(0x80U + 0x37FU - (0x37FU * ((int32_t)value) / (0xFFU))); + //tmp = 0x3FF - (0x3FF * ((int32_t)value) / (0xFF)); + //tmp = 0x100 + 0x2FF - (0x2FF * ((int32_t)value) / (0xFF)); + tx_payload[0] = CONTROL_CH_2; + break; + default: + /*std::cerr << "CDeviceValue::ApplyMostValue() error matching incorrect" << std::endl;*/ + case DEVICE_VAL_MASTER: + tmp = (uint16_t)(0x100U + 0x2FFU - (0x2FFU * ((int32_t)value) / (0xFFU))); + tx_payload[0] = CONTROL_MASTER; + break; + } + + tx_payload[1] = (uint8_t)((tmp >> 8U) & (uint16_t)0xFFU); //HB:Volume + tx_payload[2] = (uint8_t)(tmp & (uint16_t)0xFFU); //LB:Volume +} + +// returns true if target is not actual value +bool CDeviceValue::RequiresUpdate() +{ + if (this->_target_value != this->_actual_value) + { + return true; + } + + return false; +} + +bool CDeviceValue::FireUpdateMessage(lib_most_volume_writei2c_cb_t writei2c_fptr, + lib_most_volume_writei2c_result_cb_t result_fptr, + void *result_user_ptr) +{ + int ret; + ApplyMostValue(this->_target_value, _type, _tx_payload); + + ret = writei2c_fptr(this->_address, &_tx_payload[0], _tx_payload_sz, + result_fptr, + result_user_ptr); + + if (ret == 0) + { + // Clb_RegisterI2CResultCB(OnI2cResult, this); + // mark value as set! + this->_actual_value = this->_target_value; + return true; + } + + return false; +} + +#if 0 + ret = Ucs_I2c_WritePort( CSetup::GetInstance()->RetrieveUnicensInst(), + this->_address, + 0x0F00u, /* i2c port handle */ + UCS_I2C_DEFAULT_MODE, /* 0 */ + 0u, /* block count */ + 0x2Au, /* i2c slave address */ + 0x03E8u, /* timeout 1000 milliseconds */ + _tx_payload_sz, /* data length */ + &_tx_payload[0], /* data pointer */ + &Clb_OnWriteI2CPortResult + ); +#endif diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp new file mode 100644 index 0000000..a90b5b1 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/libmostvolume.cpp @@ -0,0 +1,86 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ + +#include "libmostvolume.h" +#include "setup.h" +/*#include <iostream>*/ + +static bool _running = false; + +extern "C" uint8_t lib_most_volume_init(lib_most_volume_init_t *init_ptr) +{ + uint8_t success = 1U; + /*std::cerr << "lib_most_volume_init(): called" << std::endl;*/ + + if (!_running && init_ptr) + { + CSetup::GetInstance()->Configure(init_ptr); + success = 0U; + _running = true; + } + + return success; +} + +extern "C" uint8_t lib_most_volume_exit(void) +{ + uint8_t success = 1U; + /*std::cerr << "lib_most_volume_exit(): called" << std::endl;*/ + + if (_running) + { + CSetup::Release(); + success = 0U; + _running = false; + } + + return success; +} + +extern "C" uint8_t lib_most_volume_set(enum lib_most_volume_channel_t channel, uint8_t volume) +{ + uint8_t success = 1U; + /*std::cerr << "lib_most_volume_set(): channel=" << channel << ", volume=" << (int)volume << std::endl;*/ + + if (_running) + { + CSetup::GetInstance()->SetVolume(channel, volume); + success = 0U; + } + + return success; +} + +extern "C" uint8_t lib_most_volume_service(void) +{ + uint8_t success = 1U; + /*std::cerr << "lib_most_volume_service(): called" << std::endl;*/ + + if (_running) + { + CSetup::GetInstance()->Update(); + success = 0U; + } + + return success; +} diff --git a/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp new file mode 100644 index 0000000..61b8a68 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/ucs2-vol/src/setup.cpp @@ -0,0 +1,89 @@ +/* + * libmostvolume example + * + * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * You may also obtain this software under a propriety license from Microchip. + * Please contact Microchip for further information. + * + */ +#include <stddef.h> +#include "setup.h" + +CSetup* CSetup::_instance = NULL; + +// singleton +CSetup* CSetup::GetInstance() { + if (_instance == NULL) { + _instance = new CSetup(); + } + + return _instance; +} + +// singleton +void CSetup::Release() { + if (_instance != NULL) { + delete _instance; + } + _instance = NULL; +} + +CSetup::CSetup() + : _volume_amp_270_m(0x270U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER), + _volume_amp_270_l(0x270U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_FRONT_LEFT), + _volume_amp_270_r(0x270U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_FRONT_RIGHT), + _volume_amp_271_m(0x271U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER), + _volume_amp_271_l(0x271U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_REAR_LEFT), + _volume_amp_271_r(0x271U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_REAR_RIGHT), + _volume_amp_272_m(0x272U, DEVICE_VAL_MASTER, LIB_MOST_VOLUME_MASTER), + _volume_amp_272_l(0x272U, DEVICE_VAL_LEFT, LIB_MOST_VOLUME_CH_CENTER), + _volume_amp_272_r(0x272U, DEVICE_VAL_RIGHT, LIB_MOST_VOLUME_CH_SUB), + _value_container() +{ + static CDeviceValue* value_list[9] = { &_volume_amp_270_m, + &_volume_amp_270_l, + &_volume_amp_270_r, + &_volume_amp_271_m, + &_volume_amp_271_l, + &_volume_amp_271_r, + &_volume_amp_272_m, + &_volume_amp_272_l, + &_volume_amp_272_r}; + + _value_container.RegisterValues(value_list, 9U); +} + +CSetup::~CSetup() +{ + +} + +void CSetup::Configure(lib_most_volume_init_t *init_ptr) +{ + this->init_data = *init_ptr; + _value_container.AssignService(&this->init_data); +} + +void CSetup::SetVolume(enum lib_most_volume_channel_t channel, uint8_t volume) +{ + _value_container.SetValue((uint16_t)channel, volume); +} + +void CSetup::Update() +{ + _value_container.Update(); +} diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.c b/HAL-afb/HAL_MOST_UNICENS/wrap-json.c new file mode 100644 index 0000000..987a008 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap-json.c @@ -0,0 +1,940 @@ +/*
+ Copyright (C) 2016, 2017 "IoT.bzh"
+
+ author: José Bollo <jose.bollo@iot.bzh>
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include <string.h>
+
+#include "wrap-json.h"
+
+#define STACKCOUNT 32
+#define STRCOUNT 8
+
+enum {
+ wrap_json_error_none,
+ wrap_json_error_null_object,
+ wrap_json_error_truncated,
+ wrap_json_error_internal_error,
+ wrap_json_error_out_of_memory,
+ wrap_json_error_invalid_character,
+ wrap_json_error_too_long,
+ wrap_json_error_too_deep,
+ wrap_json_error_null_spec,
+ wrap_json_error_null_key,
+ wrap_json_error_null_string,
+ wrap_json_error_out_of_range,
+ wrap_json_error_incomplete,
+ wrap_json_error_missfit_type,
+ wrap_json_error_key_not_found,
+ _wrap_json_error_count_
+};
+
+static const char ignore_all[] = " \t\n\r,:";
+static const char pack_accept_arr[] = "][{snbiIfoO";
+static const char pack_accept_key[] = "s}";
+#define pack_accept_any (&pack_accept_arr[1])
+
+static const char unpack_accept_arr[] = "*!][{snbiIfFoO";
+static const char unpack_accept_key[] = "*!s}";
+#define unpack_accept_any (&unpack_accept_arr[3])
+
+static const char *pack_errors[_wrap_json_error_count_] =
+{
+ [wrap_json_error_none] = "unknown error",
+ [wrap_json_error_null_object] = "null object",
+ [wrap_json_error_truncated] = "truncated",
+ [wrap_json_error_internal_error] = "internal error",
+ [wrap_json_error_out_of_memory] = "out of memory",
+ [wrap_json_error_invalid_character] = "invalid character",
+ [wrap_json_error_too_long] = "too long",
+ [wrap_json_error_too_deep] = "too deep",
+ [wrap_json_error_null_spec] = "spec is NULL",
+ [wrap_json_error_null_key] = "key is NULL",
+ [wrap_json_error_null_string] = "string is NULL",
+ [wrap_json_error_out_of_range] = "array too small",
+ [wrap_json_error_incomplete] = "incomplete container",
+ [wrap_json_error_missfit_type] = "missfit of type",
+ [wrap_json_error_key_not_found] = "key not found"
+};
+
+int wrap_json_get_error_position(int rc)
+{
+ if (rc < 0)
+ rc = -rc;
+ return (rc >> 4) + 1;
+}
+
+int wrap_json_get_error_code(int rc)
+{
+ if (rc < 0)
+ rc = -rc;
+ return rc & 15;
+}
+
+const char *wrap_json_get_error_string(int rc)
+{
+ rc = wrap_json_get_error_code(rc);
+ if (rc >= sizeof pack_errors / sizeof *pack_errors)
+ rc = 0;
+ return pack_errors[rc];
+}
+
+
+
+static inline const char *skip(const char *d)
+{
+ while (*d && strchr(ignore_all, *d))
+ d++;
+ return d;
+}
+
+int wrap_json_vpack(struct json_object **result, const char *desc, va_list args)
+{
+ /* TODO: the case of structs with key being single char should be optimized */
+ int nstr, notnull, nullable, rc;
+ size_t sz, dsz, ssz;
+ char *s;
+ char c;
+ const char *d;
+ char buffer[256];
+ struct { const char *str; size_t sz; } strs[STRCOUNT];
+ struct { struct json_object *cont, *key; const char *acc; char type; } stack[STACKCOUNT], *top;
+ struct json_object *obj;
+
+ ssz = sizeof buffer;
+ s = buffer;
+ top = stack;
+ top->key = NULL;
+ top->cont = NULL;
+ top->acc = pack_accept_any;
+ top->type = 0;
+ d = desc;
+ if (!d)
+ goto null_spec;
+ d = skip(d);
+ for(;;) {
+ c = *d;
+ if (!c)
+ goto truncated;
+ if (!strchr(top->acc, c))
+ goto invalid_character;
+ d = skip(++d);
+ switch(c) {
+ case 's':
+ nullable = 0;
+ notnull = 0;
+ nstr = 0;
+ sz = 0;
+ for (;;) {
+ strs[nstr].str = va_arg(args, const char*);
+ if (strs[nstr].str)
+ notnull = 1;
+ if (*d == '?') {
+ d = skip(++d);
+ nullable = 1;
+ }
+ switch(*d) {
+ case '%': strs[nstr].sz = va_arg(args, size_t); d = skip(++d); break;
+ case '#': strs[nstr].sz = (size_t)va_arg(args, int); d = skip(++d); break;
+ default: strs[nstr].sz = strs[nstr].str ? strlen(strs[nstr].str) : 0; break;
+ }
+ sz += strs[nstr++].sz;
+ if (*d == '?') {
+ d = skip(++d);
+ nullable = 1;
+ }
+ if (*d != '+')
+ break;
+ if (nstr >= STRCOUNT)
+ goto too_long;
+ d = skip(++d);
+ }
+ if (*d == '*')
+ nullable = 1;
+ if (notnull) {
+ if (sz > ssz) {
+ ssz += ssz;
+ if (ssz < sz)
+ ssz = sz;
+ s = alloca(sz);
+ }
+ dsz = sz;
+ while (nstr) {
+ nstr--;
+ dsz -= strs[nstr].sz;
+ memcpy(&s[dsz], strs[nstr].str, strs[nstr].sz);
+ }
+ obj = json_object_new_string_len(s, (int)sz);
+ if (!obj)
+ goto out_of_memory;
+ } else if (nullable)
+ obj = NULL;
+ else
+ goto null_string;
+ break;
+ case 'n':
+ obj = NULL;
+ break;
+ case 'b':
+ obj = json_object_new_boolean(va_arg(args, int));
+ if (!obj)
+ goto out_of_memory;
+ break;
+ case 'i':
+ obj = json_object_new_int(va_arg(args, int));
+ if (!obj)
+ goto out_of_memory;
+ break;
+ case 'I':
+ obj = json_object_new_int64(va_arg(args, int64_t));
+ if (!obj)
+ goto out_of_memory;
+ break;
+ case 'f':
+ obj = json_object_new_double(va_arg(args, double));
+ if (!obj)
+ goto out_of_memory;
+ break;
+ case 'o':
+ case 'O':
+ obj = va_arg(args, struct json_object*);
+ if (*d == '?')
+ d = skip(++d);
+ else if (*d != '*' && !obj)
+ goto null_object;
+ if (c == 'O')
+ json_object_get(obj);
+ break;
+ case '[':
+ case '{':
+ if (++top >= &stack[STACKCOUNT])
+ goto too_deep;
+ top->key = NULL;
+ if (c == '[') {
+ top->type = ']';
+ top->acc = pack_accept_arr;
+ top->cont = json_object_new_array();
+ } else {
+ top->type = '}';
+ top->acc = pack_accept_key;
+ top->cont = json_object_new_object();
+ }
+ if (!top->cont)
+ goto out_of_memory;
+ continue;
+ case '}':
+ case ']':
+ if (c != top->type || top <= stack)
+ goto internal_error;
+ obj = (top--)->cont;
+ if (*d == '*' && !(c == '}' ? json_object_object_length(obj) : json_object_array_length(obj))) {
+ json_object_put(obj);
+ obj = NULL;
+ }
+ break;
+ default:
+ goto internal_error;
+ }
+ switch (top->type) {
+ case 0:
+ if (top != stack)
+ goto internal_error;
+ if (*d)
+ goto invalid_character;
+ *result = obj;
+ return 0;
+ case ']':
+ if (obj || *d != '*')
+ json_object_array_add(top->cont, obj);
+ if (*d == '*')
+ d = skip(++d);
+ break;
+ case '}':
+ if (!obj)
+ goto null_key;
+ top->key = obj;
+ top->acc = pack_accept_any;
+ top->type = ':';
+ break;
+ case ':':
+ if (obj || *d != '*')
+ json_object_object_add(top->cont, json_object_get_string(top->key), obj);
+ if (*d == '*')
+ d = skip(++d);
+ json_object_put(top->key);
+ top->key = NULL;
+ top->acc = pack_accept_key;
+ top->type = '}';
+ break;
+ default:
+ goto internal_error;
+ }
+ }
+
+null_object:
+ rc = wrap_json_error_null_object;
+ goto error;
+truncated:
+ rc = wrap_json_error_truncated;
+ goto error;
+internal_error:
+ rc = wrap_json_error_internal_error;
+ goto error;
+out_of_memory:
+ rc = wrap_json_error_out_of_memory;
+ goto error;
+invalid_character:
+ rc = wrap_json_error_invalid_character;
+ goto error;
+too_long:
+ rc = wrap_json_error_too_long;
+ goto error;
+too_deep:
+ rc = wrap_json_error_too_deep;
+ goto error;
+null_spec:
+ rc = wrap_json_error_null_spec;
+ goto error;
+null_key:
+ rc = wrap_json_error_null_key;
+ goto error;
+null_string:
+ rc = wrap_json_error_null_string;
+ goto error;
+error:
+ do {
+ json_object_put(top->key);
+ json_object_put(top->cont);
+ } while (--top >= stack);
+ *result = NULL;
+ rc = rc | (int)((d - desc) << 4);
+ return -rc;
+}
+
+int wrap_json_pack(struct json_object **result, const char *desc, ...)
+{
+ int rc;
+ va_list args;
+
+ va_start(args, desc);
+ rc = wrap_json_vpack(result, desc, args);
+ va_end(args);
+ return rc;
+}
+
+static int vunpack(struct json_object *object, const char *desc, va_list args, int store)
+{
+ int rc = 0, optionnal, ignore;
+ char c, xacc[2] = { 0, 0 };
+ const char *acc;
+ const char *d, *fit = NULL;
+ const char *key = NULL;
+ const char **ps = NULL;
+ double *pf = NULL;
+ int *pi = NULL;
+ int64_t *pI = NULL;
+ size_t *pz = NULL;
+ struct { struct json_object *parent; const char *acc; int index, count; char type; } stack[STACKCOUNT], *top;
+ struct json_object *obj;
+ struct json_object **po;
+
+ xacc[0] = 0;
+ ignore = 0;
+ top = NULL;
+ acc = unpack_accept_any;
+ d = desc;
+ if (!d)
+ goto null_spec;
+ d = skip(d);
+ obj = object;
+ for(;;) {
+ fit = d;
+ c = *d;
+ if (!c)
+ goto truncated;
+ if (!strchr(acc, c))
+ goto invalid_character;
+ d = skip(++d);
+ switch(c) {
+ case 's':
+ if (xacc[0] == '}') {
+ /* expects a key */
+ key = va_arg(args, const char *);
+ if (!key)
+ goto null_key;
+ if (*d != '?')
+ optionnal = 0;
+ else {
+ optionnal = 1;
+ d = skip(++d);
+ }
+ if (ignore)
+ ignore++;
+ else {
+ if (json_object_object_get_ex(top->parent, key, &obj)) {
+ /* found */
+ top->index++;
+ } else {
+ /* not found */
+ if (!optionnal)
+ goto key_not_found;
+ ignore = 1;
+ obj = NULL;
+ }
+ }
+ xacc[0] = ':';
+ acc = unpack_accept_any;
+ continue;
+ }
+ /* get a string */
+ if (store)
+ ps = va_arg(args, const char **);
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_string))
+ goto missfit;
+ if (store && ps)
+ *ps = json_object_get_string(obj);
+ }
+ if (*d == '%') {
+ d = skip(++d);
+ if (store) {
+ pz = va_arg(args, size_t *);
+ if (!ignore && pz)
+ *pz = (size_t)json_object_get_string_len(obj);
+ }
+ }
+ break;
+ case 'n':
+ if (!ignore && !json_object_is_type(obj, json_type_null))
+ goto missfit;
+ break;
+ case 'b':
+ if (store)
+ pi = va_arg(args, int *);
+
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_boolean))
+ goto missfit;
+ if (store && pi)
+ *pi = json_object_get_boolean(obj);
+ }
+ break;
+ case 'i':
+ if (store)
+ pi = va_arg(args, int *);
+
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_int))
+ goto missfit;
+ if (store && pi)
+ *pi = json_object_get_int(obj);
+ }
+ break;
+ case 'I':
+ if (store)
+ pI = va_arg(args, int64_t *);
+
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_int))
+ goto missfit;
+ if (store && pI)
+ *pI = json_object_get_int64(obj);
+ }
+ break;
+ case 'f':
+ case 'F':
+ if (store)
+ pf = va_arg(args, double *);
+
+ if (!ignore) {
+ if (!(json_object_is_type(obj, json_type_double) || (c == 'F' && json_object_is_type(obj, json_type_int))))
+ goto missfit;
+ if (store && pf)
+ *pf = json_object_get_double(obj);
+ }
+ break;
+ case 'o':
+ case 'O':
+ if (store) {
+ po = va_arg(args, struct json_object **);
+ if (!ignore && po) {
+ if (c == 'O')
+ obj = json_object_get(obj);
+ *po = obj;
+ }
+ }
+ break;
+
+ case '[':
+ case '{':
+ if (!top)
+ top = stack;
+ else if (++top >= &stack[STACKCOUNT])
+ goto too_deep;
+
+ top->acc = acc;
+ top->type = xacc[0];
+ top->index = 0;
+ top->parent = obj;
+ if (ignore)
+ ignore++;
+ if (c == '[') {
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_array))
+ goto missfit;
+ top->count = json_object_array_length(obj);
+ }
+ xacc[0] = ']';
+ acc = unpack_accept_arr;
+ } else {
+ if (!ignore) {
+ if (!json_object_is_type(obj, json_type_object))
+ goto missfit;
+ top->count = json_object_object_length(obj);
+ }
+ xacc[0] = '}';
+ acc = unpack_accept_key;
+ continue;
+ }
+ break;
+ case '}':
+ case ']':
+ if (!top || c != xacc[0])
+ goto internal_error;
+ acc = top->acc;
+ xacc[0] = top->type;
+ top = top == stack ? NULL : top - 1;
+ if (ignore)
+ ignore--;
+ break;
+ case '!':
+ if (*d != xacc[0])
+ goto invalid_character;
+ if (!ignore && top->index != top->count)
+ goto incomplete;
+ /*@fallthrough@*/
+ case '*':
+ acc = xacc;
+ continue;
+ default:
+ goto internal_error;
+ }
+ switch (xacc[0]) {
+ case 0:
+ if (top)
+ goto internal_error;
+ if (*d)
+ goto invalid_character;
+ return 0;
+ case ']':
+ if (!ignore) {
+ key = strchr(unpack_accept_arr, *d);
+ if (key && key >= unpack_accept_any) {
+ if (top->index >= top->count)
+ goto out_of_range;
+ obj = json_object_array_get_idx(top->parent, top->index++);
+ }
+ }
+ break;
+ case ':':
+ acc = unpack_accept_key;
+ xacc[0] = '}';
+ if (ignore)
+ ignore--;
+ break;
+ default:
+ goto internal_error;
+ }
+ }
+truncated:
+ rc = wrap_json_error_truncated;
+ goto error;
+internal_error:
+ rc = wrap_json_error_internal_error;
+ goto error;
+invalid_character:
+ rc = wrap_json_error_invalid_character;
+ goto error;
+too_deep:
+ rc = wrap_json_error_too_deep;
+ goto error;
+null_spec:
+ rc = wrap_json_error_null_spec;
+ goto error;
+null_key:
+ rc = wrap_json_error_null_key;
+ goto error;
+out_of_range:
+ rc = wrap_json_error_out_of_range;
+ goto error;
+incomplete:
+ rc = wrap_json_error_incomplete;
+ goto error;
+missfit:
+ rc = wrap_json_error_missfit_type;
+ goto errorfit;
+key_not_found:
+ rc = wrap_json_error_key_not_found;
+ goto error;
+errorfit:
+ d = fit;
+error:
+ rc = rc | (int)((d - desc) << 4);
+ return -rc;
+}
+
+int wrap_json_vcheck(struct json_object *object, const char *desc, va_list args)
+{
+ return vunpack(object, desc, args, 0);
+}
+
+int wrap_json_check(struct json_object *object, const char *desc, ...)
+{
+ int rc;
+ va_list args;
+
+ va_start(args, desc);
+ rc = vunpack(object, desc, args, 0);
+ va_end(args);
+ return rc;
+}
+
+int wrap_json_vmatch(struct json_object *object, const char *desc, va_list args)
+{
+ return !vunpack(object, desc, args, 0);
+}
+
+int wrap_json_match(struct json_object *object, const char *desc, ...)
+{
+ int rc;
+ va_list args;
+
+ va_start(args, desc);
+ rc = vunpack(object, desc, args, 0);
+ va_end(args);
+ return !rc;
+}
+
+int wrap_json_vunpack(struct json_object *object, const char *desc, va_list args)
+{
+ return vunpack(object, desc, args, 1);
+}
+
+int wrap_json_unpack(struct json_object *object, const char *desc, ...)
+{
+ int rc;
+ va_list args;
+
+ va_start(args, desc);
+ rc = vunpack(object, desc, args, 1);
+ va_end(args);
+ return rc;
+}
+
+static void object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)
+{
+ struct json_object_iterator it = json_object_iter_begin(object);
+ struct json_object_iterator end = json_object_iter_end(object);
+ while (!json_object_iter_equal(&it, &end)) {
+ callback(closure, json_object_iter_peek_value(&it), json_object_iter_peek_name(&it));
+ json_object_iter_next(&it);
+ }
+}
+
+static void array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)
+{
+ int n = json_object_array_length(object);
+ int i = 0;
+ while(i < n)
+ callback(closure, json_object_array_get_idx(object, i++));
+}
+
+void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)
+{
+ if (json_object_is_type(object, json_type_array))
+ array_for_all(object, callback, closure);
+ else
+ callback(closure, object);
+}
+
+void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure)
+{
+ if (json_object_is_type(object, json_type_array))
+ array_for_all(object, callback, closure);
+}
+
+void wrap_json_object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)
+{
+ if (json_object_is_type(object, json_type_object))
+ object_for_all(object, callback, closure);
+}
+
+void wrap_json_optobject_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)
+{
+ if (json_object_is_type(object, json_type_object))
+ object_for_all(object, callback, closure);
+ else
+ callback(closure, object, NULL);
+}
+
+void wrap_json_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure)
+{
+ if (!object)
+ /* do nothing */;
+ else if (json_object_is_type(object, json_type_object))
+ object_for_all(object, callback, closure);
+ else if (!json_object_is_type(object, json_type_array))
+ callback(closure, object, NULL);
+ else {
+ int n = json_object_array_length(object);
+ int i = 0;
+ while(i < n)
+ callback(closure, json_object_array_get_idx(object, i++), NULL);
+ }
+}
+
+#if defined(WRAP_JSON_TEST)
+#include <stdio.h>
+
+void p(const char *desc, ...)
+{
+ int rc;
+ va_list args;
+ struct json_object *result;
+
+ va_start(args, desc);
+ rc = wrap_json_vpack(&result, desc, args);
+ va_end(args);
+ if (!rc)
+ printf(" SUCCESS %s\n\n", json_object_to_json_string(result));
+ else
+ printf(" ERROR[char %d err %d] %s\n\n", wrap_json_get_error_position(rc), wrap_json_get_error_code(rc), wrap_json_get_error_string(rc));
+ json_object_put(result);
+}
+
+const char *xs[10];
+int *xi[10];
+int64_t *xI[10];
+double *xf[10];
+struct json_object *xo[10];
+size_t xz[10];
+
+void u(const char *value, const char *desc, ...)
+{
+ unsigned m, k;
+ int rc;
+ va_list args;
+ struct json_object *obj, *o;
+
+ memset(xs, 0, sizeof xs);
+ memset(xi, 0, sizeof xi);
+ memset(xI, 0, sizeof xI);
+ memset(xf, 0, sizeof xf);
+ memset(xo, 0, sizeof xo);
+ memset(xz, 0, sizeof xz);
+ obj = json_tokener_parse(value);
+ va_start(args, desc);
+ rc = wrap_json_vunpack(obj, desc, args);
+ va_end(args);
+ if (rc)
+ printf(" ERROR[char %d err %d] %s\n\n", wrap_json_get_error_position(rc), wrap_json_get_error_code(rc), wrap_json_get_error_string(rc));
+ else {
+ value = NULL;
+ printf(" SUCCESS");
+ va_start(args, desc);
+ k = m = 0;
+ while(*desc) {
+ switch(*desc) {
+ case '{': m = (m << 1) | 1; k = 1; break;
+ case '}': m = m >> 1; k = m&1; break;
+ case '[': m = m << 1; k = 0; break;
+ case ']': m = m >> 1; k = m&1; break;
+ case 's': printf(" s:%s", k ? va_arg(args, const char*) : *(va_arg(args, const char**)?:&value)); k ^= m&1; break;
+ case '%': printf(" %%:%zu", *va_arg(args, size_t*)); k = m&1; break;
+ case 'n': printf(" n"); k = m&1; break;
+ case 'b': printf(" b:%d", *va_arg(args, int*)); k = m&1; break;
+ case 'i': printf(" i:%d", *va_arg(args, int*)); k = m&1; break;
+ case 'I': printf(" I:%lld", *va_arg(args, int64_t*)); k = m&1; break;
+ case 'f': printf(" f:%f", *va_arg(args, double*)); k = m&1; break;
+ case 'F': printf(" F:%f", *va_arg(args, double*)); k = m&1; break;
+ case 'o': printf(" o:%s", json_object_to_json_string(*va_arg(args, struct json_object**))); k = m&1; break;
+ case 'O': o = *va_arg(args, struct json_object**); printf(" O:%s", json_object_to_json_string(o)); json_object_put(o); k = m&1; break;
+ default: break;
+ }
+ desc++;
+ }
+ va_end(args);
+ printf("\n\n");
+ }
+ json_object_put(obj);
+}
+
+#define P(...) do{ printf("pack(%s)\n",#__VA_ARGS__); p(__VA_ARGS__); } while(0)
+#define U(...) do{ printf("unpack(%s)\n",#__VA_ARGS__); u(__VA_ARGS__); } while(0)
+
+int main()
+{
+ char buffer[4] = {'t', 'e', 's', 't'};
+
+ P("n");
+ P("b", 1);
+ P("b", 0);
+ P("i", 1);
+ P("I", (uint64_t)0x123456789abcdef);
+ P("f", 3.14);
+ P("s", "test");
+ P("s?", "test");
+ P("s?", NULL);
+ P("s#", "test asdf", 4);
+ P("s%", "test asdf", (size_t)4);
+ P("s#", buffer, 4);
+ P("s%", buffer, (size_t)4);
+ P("s++", "te", "st", "ing");
+ P("s#+#+", "test", 1, "test", 2, "test");
+ P("s%+%+", "test", (size_t)1, "test", (size_t)2, "test");
+ P("{}", 1.0);
+ P("[]", 1.0);
+ P("o", json_object_new_int(1));
+ P("o?", json_object_new_int(1));
+ P("o?", NULL);
+ P("O", json_object_new_int(1));
+ P("O?", json_object_new_int(1));
+ P("O?", NULL);
+ P("{s:[]}", "foo");
+ P("{s+#+: []}", "foo", "barbar", 3, "baz");
+ P("{s:s,s:o,s:O}", "a", NULL, "b", NULL, "c", NULL);
+ P("{s:**}", "a", NULL);
+ P("{s:s*,s:o*,s:O*}", "a", NULL, "b", NULL, "c", NULL);
+ P("[i,i,i]", 0, 1, 2);
+ P("[s,o,O]", NULL, NULL, NULL);
+ P("[**]", NULL);
+ P("[s*,o*,O*]", NULL, NULL, NULL);
+ P(" s ", "test");
+ P("[ ]");
+ P("[ i , i, i ] ", 1, 2, 3);
+ P("{\n\n1");
+ P("[}");
+ P("{]");
+ P("[");
+ P("{");
+ P("[i]a", 42);
+ P("ia", 42);
+ P("s", NULL);
+ P("+", NULL);
+ P(NULL);
+ P("{s:i}", NULL, 1);
+ P("{ {}: s }", "foo");
+ P("{ s: {}, s:[ii{} }", "foo", "bar", 12, 13);
+ P("[[[[[ [[[[[ [[[[ }]]]] ]]]] ]]]]]");
+
+ U("true", "b", &xi[0]);
+ U("false", "b", &xi[0]);
+ U("null", "n");
+ U("42", "i", &xi[0]);
+ U("123456789", "I", &xI[0]);
+ U("3.14", "f", &xf[0]);
+ U("12345", "F", &xf[0]);
+ U("3.14", "F", &xf[0]);
+ U("\"foo\"", "s", &xs[0]);
+ U("\"foo\"", "s%", &xs[0], &xz[0]);
+ U("{}", "{}");
+ U("[]", "[]");
+ U("{}", "o", &xo[0]);
+ U("{}", "O", &xo[0]);
+ U("{\"foo\":42}", "{si}", "foo", &xi[0]);
+ U("[1,2,3]", "[i,i,i]", &xi[0], &xi[1], &xi[2]);
+ U("{\"a\":1,\"b\":2,\"c\":3}", "{s:i, s:i, s:i}", "a", &xi[0], "b", &xi[1], "c", &xi[2]);
+ U("42", "z");
+ U("null", "[i]");
+ U("[]", "[}");
+ U("{}", "{]");
+ U("[]", "[");
+ U("{}", "{");
+ U("[42]", "[i]a", &xi[0]);
+ U("42", "ia", &xi[0]);
+ U("[]", NULL);
+ U("\"foo\"", "s", NULL);
+ U("42", "s", NULL);
+ U("42", "n");
+ U("42", "b", NULL);
+ U("42", "f", NULL);
+ U("42", "[i]", NULL);
+ U("42", "{si}", "foo", NULL);
+ U("\"foo\"", "n");
+ U("\"foo\"", "b", NULL);
+ U("\"foo\"", "i", NULL);
+ U("\"foo\"", "I", NULL);
+ U("\"foo\"", "f", NULL);
+ U("\"foo\"", "F", NULL);
+ U("true", "s", NULL);
+ U("true", "n");
+ U("true", "i", NULL);
+ U("true", "I", NULL);
+ U("true", "f", NULL);
+ U("true", "F", NULL);
+ U("[42]", "[ii]", &xi[0], &xi[1]);
+ U("{\"foo\":42}", "{si}", NULL, &xi[0]);
+ U("{\"foo\":42}", "{si}", "baz", &xi[0]);
+ U("[1,2,3]", "[iii!]", &xi[0], &xi[1], &xi[2]);
+ U("[1,2,3]", "[ii!]", &xi[0], &xi[1]);
+ U("[1,2,3]", "[ii]", &xi[0], &xi[1]);
+ U("[1,2,3]", "[ii*]", &xi[0], &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{sisi}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{sisi*}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{sisi!}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{si}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{si*}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42,\"baz\":45}", "{si!}", "baz", &xi[0], "foo", &xi[1]);
+ U("[1,{\"foo\":2,\"bar\":null},[3,4]]", "[i{sisn}[ii]]", &xi[0], "foo", &xi[1], "bar", &xi[2], &xi[3]);
+ U("[1,2,3]", "[ii!i]", &xi[0], &xi[1], &xi[2]);
+ U("[1,2,3]", "[ii*i]", &xi[0], &xi[1], &xi[2]);
+ U("{\"foo\":1,\"bar\":2}", "{si!si}", "foo", &xi[1], "bar", &xi[2]);
+ U("{\"foo\":1,\"bar\":2}", "{si*si}", "foo", &xi[1], "bar", &xi[2]);
+ U("{\"foo\":{\"baz\":null,\"bar\":null}}", "{s{sn!}}", "foo", "bar");
+ U("[[1,2,3]]", "[[ii!]]", &xi[0], &xi[1]);
+ U("{}", "{s?i}", "foo", &xi[0]);
+ U("{\"foo\":1}", "{s?i}", "foo", &xi[0]);
+ U("{}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);
+ U("{\"foo\":[1,2]}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);
+ U("{\"bar\":{\"baz\":{\"quux\":15}}}", "{s?[ii]s?{s{si!}}}", "foo", &xi[0], &xi[1], "bar", "baz", "quux", &xi[2]);
+ U("{\"foo\":{\"bar\":4}}", "{s?{s?i}}", "foo", "bar", &xi[0]);
+ U("{\"foo\":{}}", "{s?{s?i}}", "foo", "bar", &xi[0]);
+ U("{}", "{s?{s?i}}", "foo", "bar", &xi[0]);
+ U("{\"foo\":42,\"baz\":45}", "{s?isi!}", "baz", &xi[0], "foo", &xi[1]);
+ U("{\"foo\":42}", "{s?isi!}", "baz", &xi[0], "foo", &xi[1]);
+ return 0;
+}
+
+#endif
+
+#if 0
+
+
+ /* Unpack the same item twice */
+ j = json_pack("{s:s, s:i, s:b}", "foo", "bar", "baz", 42, "quux", 1);
+ if(!json_unpack_ex(j, &error, 0, "{s:s,s:s!}", "foo", &s, "foo", &s))
+ fail("json_unpack object with strict validation failed");
+ {
+ const char *possible_errors[] = {
+ "2 object item(s) left unpacked: baz, quux",
+ "2 object item(s) left unpacked: quux, baz"
+ };
+ check_errors(possible_errors, 2, "<validation>", 1, 10, 10);
+ }
+ json_decref(j);
+
+#endif
+
\ No newline at end of file diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.h b/HAL-afb/HAL_MOST_UNICENS/wrap-json.h new file mode 100644 index 0000000..b5eadf5 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap-json.h @@ -0,0 +1,47 @@ +/*
+ Copyright (C) 2016, 2017 "IoT.bzh"
+
+ author: José Bollo <jose.bollo@iot.bzh>
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#pragma once
+
+#include <stdarg.h>
+#include <json-c/json.h>
+
+extern int wrap_json_get_error_position(int rc);
+extern int wrap_json_get_error_code(int rc);
+extern const char *wrap_json_get_error_string(int rc);
+
+extern int wrap_json_vpack(struct json_object **result, const char *desc, va_list args);
+extern int wrap_json_pack(struct json_object **result, const char *desc, ...);
+
+extern int wrap_json_vunpack(struct json_object *object, const char *desc, va_list args);
+extern int wrap_json_unpack(struct json_object *object, const char *desc, ...);
+extern int wrap_json_vcheck(struct json_object *object, const char *desc, va_list args);
+extern int wrap_json_check(struct json_object *object, const char *desc, ...);
+extern int wrap_json_vmatch(struct json_object *object, const char *desc, va_list args);
+extern int wrap_json_match(struct json_object *object, const char *desc, ...);
+
+extern void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);
+extern void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);
+
+extern void wrap_json_optarray_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);
+extern void wrap_json_array_for_all(struct json_object *object, void (*callback)(void*,struct json_object*), void *closure);
+extern void wrap_json_object_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);
+extern void wrap_json_optobject_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);
+extern void wrap_json_for_all(struct json_object *object, void (*callback)(void*,struct json_object*,const char*), void *closure);
+
+
\ No newline at end of file diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap-json.md b/HAL-afb/HAL_MOST_UNICENS/wrap-json.md new file mode 100644 index 0000000..3718b66 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap-json.md @@ -0,0 +1,306 @@ +WRAP-JSON facility
+==================
+
+The facility wrap-json is based on the pack/unpack API on the
+libray jansson. The two chapters below are copied from the
+documentation of jansson library copyrighted by Petri Lehtinen
+(see at end).
+
+Building Values
+---------------
+
+This section describes functions that help to create, or *pack*, complex
+JSON values, especially nested objects and arrays. Value building is
+based on a *format string* that is used to tell the functions about the
+expected arguments.
+
+For example, the format string `"i"` specifies a single integer value,
+while the format string `"[ssb]"` or the equivalent `"[s, s, b]"`
+specifies an array value with two strings and a boolean as its items:
+
+ /* Create the JSON integer 42 */
+ wrap_json_pack(&result, "i", 42);
+
+ /* Create the JSON array ["foo", "bar", true] */
+ wrap_json_pack(&result, "[ssb]", "foo", "bar", 1);
+
+Here's the full list of format specifiers. The type in parentheses
+denotes the resulting JSON type, and the type in brackets (if any)
+denotes the C type that is expected as the corresponding argument or
+arguments.
+
+`s` (string) \[const char \*\]
+
+: Convert a null terminated UTF-8 string to a JSON string.
+
+`s?` (string) \[const char \*\]
+
+: Like `s`, but if the argument is *NULL*, output a JSON null value.
+
+`s*` (string) \[const char \*\]
+
+: Like `s`, but if the argument is *NULL*, do not output any value.
+ This format can only be used inside an object or an array. If used
+ inside an object, the corresponding key is additionally suppressed
+ when the value is omitted. See below for an example.
+
+`s#` (string) \[const char \*, int\]
+
+: Convert a UTF-8 buffer of a given length to a JSON string.
+
+`s%` (string) \[const char \*, size\_t\]
+
+: Like `s#` but the length argument is of type size\_t.
+
+`+` \[const char \*\]
+
+: Like `s`, but concatenate to the previous string. Only valid after
+ `s`, `s#`, `+` or `+#`.
+
+`+#` \[const char \*, int\]
+
+: Like `s#`, but concatenate to the previous string. Only valid after
+ `s`, `s#`, `+` or `+#`.
+
+`+%` (string) \[const char \*, size\_t\]
+
+: Like `+#` but the length argument is of type size\_t.
+
+`n` (null)
+
+: Output a JSON null value. No argument is consumed.
+
+`b` (boolean) \[int\]
+
+: Convert a C int to JSON boolean value. Zero is converted to `false`
+ and non-zero to `true`.
+
+`i` (integer) \[int\]
+
+: Convert a C int to JSON integer.
+
+`I` (integer) \[json\_int\_t\]
+
+: Convert a C json\_int\_t to JSON integer.
+
+`f` (real) \[double\]
+
+: Convert a C double to JSON real.
+
+`o` (any value) \[json\_t \*\]
+
+: Output any given JSON value as-is. If the value is added to an array
+ or object, the reference to the value passed to `o` is stolen by the
+ container.
+
+`O` (any value) \[json\_t \*\]
+
+: Like `o`, but the argument's reference count is incremented. This is
+ useful if you pack into an array or object and want to keep the
+ reference for the JSON value consumed by `O` to yourself.
+
+`o?`, `O?` (any value) \[json\_t \*\]
+
+: Like `o` and `O`, respectively, but if the argument is *NULL*,
+ output a JSON null value.
+
+`o*`, `O*` (any value) \[json\_t \*\]
+
+: Like `o` and `O`, respectively, but if the argument is *NULL*, do
+ not output any value. This format can only be used inside an object
+ or an array. If used inside an object, the corresponding key is
+ additionally suppressed. See below for an example.
+
+`[fmt]` (array)
+
+: Build an array with contents from the inner format string. `fmt` may
+ contain objects and arrays, i.e. recursive value building is
+ supported.
+
+`{fmt}` (object)
+
+: Build an object with contents from the inner format string `fmt`.
+ The first, third, etc. format specifier represent a key, and must be
+ a string (see `s`, `s#`, `+` and `+#` above), as object keys are
+ always strings. The second, fourth, etc. format specifier represent
+ a value. Any value may be an object or array, i.e. recursive value
+ building is supported.
+
+Whitespace, `:` and `,` are ignored.
+
+More examples:
+
+ /* Build an empty JSON object */
+ wrap_json_pack(&result, "{}");
+
+ /* Build the JSON object {"foo": 42, "bar": 7} */
+ wrap_json_pack(&result, "{sisi}", "foo", 42, "bar", 7);
+
+ /* Like above, ':', ',' and whitespace are ignored */
+ wrap_json_pack(&result, "{s:i, s:i}", "foo", 42, "bar", 7);
+
+ /* Build the JSON array [[1, 2], {"cool": true}] */
+ wrap_json_pack(&result, "[[i,i],{s:b}]", 1, 2, "cool", 1);
+
+ /* Build a string from a non-null terminated buffer */
+ char buffer[4] = {'t', 'e', 's', 't'};
+ wrap_json_pack(&result, "s#", buffer, 4);
+
+ /* Concatenate strings together to build the JSON string "foobarbaz" */
+ wrap_json_pack(&result, "s++", "foo", "bar", "baz");
+
+ /* Create an empty object or array when optional members are missing */
+ wrap_json_pack(&result, "{s:s*,s:o*,s:O*}", "foo", NULL, "bar", NULL, "baz", NULL);
+ wrap_json_pack(&result, "[s*,o*,O*]", NULL, NULL, NULL);
+
+Parsing and Validating Values
+-----------------------------
+
+This section describes functions that help to validate complex values
+and extract, or *unpack*, data from them. Like building values
+<apiref-pack>, this is also based on format strings.
+
+While a JSON value is unpacked, the type specified in the format string
+is checked to match that of the JSON value. This is the validation part
+of the process. In addition to this, the unpacking functions can also
+check that all items of arrays and objects are unpacked. This check be
+enabled with the format specifier `!` or by using the flag
+`JSON_STRICT`. See below for details.
+
+Here's the full list of format specifiers. The type in parentheses
+denotes the JSON type, and the type in brackets (if any) denotes the C
+type whose address should be passed.
+
+`s` (string) \[const char \*\]
+
+: Convert a JSON string to a pointer to a null terminated UTF-8
+ string. The resulting string is extracted by using
+ json\_string\_value() internally, so it exists as long as there are
+ still references to the corresponding JSON string.
+
+`s%` (string) \[const char \*, size\_t \*\]
+
+: Convert a JSON string to a pointer to a null terminated UTF-8 string
+ and its length.
+
+`n` (null)
+
+: Expect a JSON null value. Nothing is extracted.
+
+`b` (boolean) \[int\]
+
+: Convert a JSON boolean value to a C int, so that `true` is converted
+ to 1 and `false` to 0.
+
+`i` (integer) \[int\]
+
+: Convert a JSON integer to C int.
+
+`I` (integer) \[json\_int\_t\]
+
+: Convert a JSON integer to C json\_int\_t.
+
+`f` (real) \[double\]
+
+: Convert a JSON real to C double.
+
+`F` (integer or real) \[double\]
+
+: Convert a JSON number (integer or real) to C double.
+
+`o` (any value) \[json\_t \*\]
+
+: Store a JSON value with no conversion to a json\_t pointer.
+
+`O` (any value) \[json\_t \*\]
+
+: Like `O`, but the JSON value's reference count is incremented.
+
+`[fmt]` (array)
+
+: Convert each item in the JSON array according to the inner format
+ string. `fmt` may contain objects and arrays, i.e. recursive value
+ extraction is supported.
+
+`{fmt}` (object)
+
+: Convert each item in the JSON object according to the inner format
+ string `fmt`. The first, third, etc. format specifier represent a
+ key, and must be `s`. The corresponding argument to unpack functions
+ is read as the object key. The second fourth, etc. format specifier
+ represent a value and is written to the address given as the
+ corresponding argument. **Note** that every other argument is read
+ from and every other is written to.
+
+ `fmt` may contain objects and arrays as values, i.e. recursive value
+ extraction is supported.
+
+`!`
+
+: This special format specifier is used to enable the check that all
+ object and array items are accessed, on a per-value basis. It must
+ appear inside an array or object as the last format specifier before
+ the closing bracket or brace.
+
+`*`
+
+: This special format specifier is the opposite of `!`. This is the default.
+ It must appear inside an array or object as the last format specifier
+ before the closing bracket or brace.
+
+Whitespace, `:` and `,` are ignored.
+
+Examples:
+
+ /* root is the JSON integer 42 */
+ int myint;
+ wrap_json_unpack(root, "i", &myint);
+ assert(myint == 42);
+
+ /* root is the JSON object {"foo": "bar", "quux": true} */
+ const char *str;
+ int boolean;
+ wrap_json_unpack(root, "{s:s, s:b}", "foo", &str, "quux", &boolean);
+ assert(strcmp(str, "bar") == 0 && boolean == 1);
+
+ /* root is the JSON array [[1, 2], {"baz": null} */
+ wrap_json_check(root, "[[i,i], {s:n}]", "baz");
+ /* returns 0 for validation success, nothing is extracted */
+
+ /* root is the JSON array [1, 2, 3, 4, 5] */
+ int myint1, myint2;
+ wrap_json_unpack(root, "[ii!]", &myint1, &myint2);
+ /* returns -1 for failed validation */
+
+ /* root is an empty JSON object */
+ int myint = 0, myint2 = 0, myint3 = 0;
+ wrap_json_unpack(root, "{s?i, s?[ii]}",
+ "foo", &myint1,
+ "bar", &myint2, &myint3);
+ /* myint1, myint2 or myint3 is no touched as "foo" and "bar" don't exist */
+
+
+Copyright
+---------
+
+Copyright (c) 2009-2016 Petri Lehtinen <petri@digip.org>
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
\ No newline at end of file diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c new file mode 100644 index 0000000..dc82568 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.c @@ -0,0 +1,336 @@ +/* + * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. + * Author Tobias Jahnke + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ +#define _GNU_SOURCE +#define AFB_BINDING_VERSION 2 + +#include <string.h> +#include <json-c/json.h> +#include <afb/afb-binding.h> +#include "wrap_unicens.h" +#include "wrap-json.h" + +typedef struct async_job_ { + wrap_ucs_result_cb_t result_fptr; + void *result_user_ptr; +} async_job_t; + +typedef struct parse_result_ { + int done; + char *str_result; +} parse_result_t; + +/* Subscribes to unicens2-binding events. + * \return Returns 0 if successful, otherwise != 0". + */ +extern int wrap_ucs_subscribe_sync() { + + json_object *j_response, *j_query = NULL; + int err; + + /* Build an empty JSON object */ + err = wrap_json_pack(&j_query, "{}"); + if (err) { + AFB_ERROR("Failed to create subscribe json object"); + goto OnErrorExit; + } + + err = afb_service_call_sync("UNICENS", "subscribe", j_query, &j_response); + if (err) { + AFB_ERROR("Fail subscribing to UNICENS events"); + goto OnErrorExit; + } + else { + AFB_NOTICE("Subscribed to UNICENS events, res=%s", json_object_to_json_string(j_response)); + json_object_put(j_response); + } + json_object_put(j_query); + j_query = NULL; + +OnErrorExit: + if (j_query) + json_object_put(j_query); + return err; +} + +/* Checks if name ends with a given letter. */ +static int wrap_ucs_string_ends_with(const char *name, char letter) { + + int result = 0; + size_t len = strlen(name); + + if (len > 0) { + + if (name[len] == letter) { + result = 1; + } + } + + return result; +} + +/* Callback for iteration through found files. Marks search as "done" as + * soon as the search pattern "kit.xml" matches. + * \param closure User reference. Points to parse_result_t. + * \param j_obj Points to json object within array. + */ +static void wrap_ucs_find_xml_cb(void *closure, struct json_object *j_obj) { + + const char *dir, *name; + parse_result_t *result; + + if (!closure) + return; + + result = (parse_result_t *)closure; + if (result->done) + return; + + wrap_json_unpack(j_obj, "{s:s, s:s}", "dirpath", &dir, "basename", &name); + AFB_DEBUG("Found file: %s", name); + + if(strstr(name, "kit.xml") != NULL) { + size_t sz = strlen(dir)+strlen(name)+10; + char * full_path = malloc(sz); + + strncpy(full_path, dir, sz); + + if (!wrap_ucs_string_ends_with(dir, '/')) + strncat(full_path, "/", sz); + + strncat(full_path, name, sz); + AFB_DEBUG("Found XML file: %s", full_path); + + result->done = 1; + result->str_result = full_path; + } +} + +/* Retrieves XML configuration path to initialize unicens2-binding. + * \param config_path Directory containing XML configuration file(s). + * \param file_found Points to found file_path or NULL if not found. + * Memory must be released by calling free(). + * \return Returns 0 if successful, otherwise != 0". + */ +extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found) { + + int err = 0; + json_object *j_response, *j_query, *j_paths = NULL; + parse_result_t result = {.done = 0, .str_result = NULL}; + + *file_found = NULL; + + /* Build JSON object to retrieve UNICENS configuration */ + if ((config_path == NULL) || (strcmp(config_path, "") == 0)) + err = wrap_json_pack(&j_query, "{}"); + else + err = wrap_json_pack(&j_query, "{s:s}", "cfgpath", config_path); + + if (err) { + AFB_ERROR("Failed to create listconfig json object"); + goto OnErrorExit; + } + + err = afb_service_call_sync("UNICENS", "listconfig", j_query, &j_response); + if (err) { + AFB_ERROR("Failed to call listconfig"); + goto OnErrorExit; + } + else { + AFB_DEBUG("UNICENS listconfig result, res=%s", json_object_to_json_string(j_response)); + + if (json_object_object_get_ex(j_response, "response", &j_paths)) { + + AFB_DEBUG("UNICENS listconfig result, paths=%s", json_object_to_json_string(j_paths)); + + wrap_json_optarray_for_all(j_paths, &wrap_ucs_find_xml_cb, &result); + + if (result.done) { + *file_found = strdup(result.str_result); + free(result.str_result); + result.str_result = NULL; + } + else { + AFB_NOTICE("wrap_ucs_getconfig_sync, search pattern does not match for paths=%s", json_object_to_json_string(j_paths)); + err = -1; + } + } + + json_object_put(j_response); + } + json_object_put(j_query); + j_query = NULL; + +OnErrorExit: + if (j_query) + json_object_put(j_query); + return err; +} + +/* Initializes the unicens2-binding. + * \param file_name Path to XML configuration file or \c NULL for + * first found file in default path. + * \return Returns 0 if successful, otherwise != 0". + */ +extern int wrap_ucs_initialize_sync(const char *file_name) { + json_object *j_response, *j_query = NULL; + int err; + + /* Build JSON object to initialize UNICENS */ + if (file_name != NULL) + err = wrap_json_pack(&j_query, "{s:s}", "filename", file_name); + else + err = wrap_json_pack(&j_query, "{}"); + + if (err) { + AFB_ERROR("Failed to create initialize json object"); + goto OnErrorExit; + } + err = afb_service_call_sync("UNICENS", "initialise", j_query, &j_response); + if (err) { + AFB_ERROR("Failed to initialize UNICENS"); + goto OnErrorExit; + } + else { + AFB_NOTICE("Initialized UNICENS, res=%s", json_object_to_json_string(j_response)); + json_object_put(j_response); + } + + json_object_put(j_query); + j_query = NULL; + +OnErrorExit: + if (j_query) + json_object_put(j_query); + return err; +} + +/* Write I2C command to a network node. + * \param node Node address + * \param data_ptr Reference to command data + * \param data_sz Size of the command data. Valid values: 1..32. + * \return Returns 0 if successful, otherwise != 0". + */ +extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz) { + + json_object *j_response, *j_query, *j_array = NULL; + int err; + uint8_t cnt; + + j_query = json_object_new_object(); + j_array = json_object_new_array(); + + if (!j_query || !j_array) { + err = -1; + AFB_ERROR("Failed to create writei2c json objects"); + goto OnErrorExit; + } + + for (cnt = 0U; cnt < data_sz; cnt++) { + json_object_array_add(j_array, json_object_new_int(data_ptr[cnt])); + } + + json_object_object_add(j_query, "node", json_object_new_int(node)); + json_object_object_add(j_query, "data", j_array); + + err = afb_service_call_sync("UNICENS", "writei2c", j_query, &j_response); + + if (err) { + AFB_ERROR("Failed to call writei2c_sync"); + goto OnErrorExit; + } + else { + AFB_INFO("Called writei2c_sync, res=%s", json_object_to_json_string(j_response)); + json_object_put(j_response); + } + + json_object_put(j_query); + j_query = NULL; + +OnErrorExit: + if (j_query) + json_object_put(j_query); + return err; +} + +/* ------------------ ASYNCHRONOUS API ---------------------------------------*/ + +static void wrap_ucs_i2cwrite_cb(void *closure, int status, struct json_object *j_result) { + + AFB_INFO("wrap_ucs_i2cwrite_cb: closure=%p status=%d, res=%s", closure, status, json_object_to_json_string(j_result)); + + if (closure) { + async_job_t *job_ptr = (async_job_t *)closure; + + if (job_ptr->result_fptr) + job_ptr->result_fptr(0U, job_ptr->result_user_ptr); + + free(closure); + } +} + +/* Write I2C command to a network node. + * \param node Node address + * \param data_ptr Reference to command data + * \param data_sz Size of the command data. Valid values: 1..32. + * \return Returns 0 if successful, otherwise != 0". + */ +extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz, + wrap_ucs_result_cb_t result_fptr, + void *result_user_ptr) { + + json_object *j_query, *j_array = NULL; + async_job_t *job_ptr = NULL; + int err; + uint8_t cnt; + + j_query = json_object_new_object(); + j_array = json_object_new_array(); + + if (!j_query || !j_array) { + err = -1; + AFB_ERROR("Failed to create writei2c json objects"); + goto OnErrorExit; + } + + for (cnt = 0U; cnt < data_sz; cnt++) { + json_object_array_add(j_array, json_object_new_int(data_ptr[cnt])); + } + + json_object_object_add(j_query, "node", json_object_new_int(node)); + json_object_object_add(j_query, "data", j_array); + + job_ptr = malloc(sizeof(async_job_t)); + + if (!job_ptr) { + err = -1; + AFB_ERROR("Failed to create async job object"); + goto OnErrorExit; + } + + job_ptr->result_fptr = result_fptr; + job_ptr->result_user_ptr = result_user_ptr; + + afb_service_call("UNICENS", "writei2c", j_query, wrap_ucs_i2cwrite_cb, job_ptr); + err = 0; + j_query = NULL; + +OnErrorExit: + if (j_query) + json_object_put(j_query); + return err; +} diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h new file mode 100644 index 0000000..c28d13a --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap_unicens.h @@ -0,0 +1,34 @@ +/*
+ * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
+ * Author Tobias Jahnke
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+#pragma once
+#include <stdint.h>
+
+/* Asynchronous API: result callback */
+typedef void (*wrap_ucs_result_cb_t)(uint8_t result, void *user_ptr);
+
+/* Asynchronous API: functions */
+extern int wrap_ucs_i2cwrite(uint16_t node, uint8_t *data_ptr, uint8_t data_sz,
+ wrap_ucs_result_cb_t result_fptr,
+ void *result_user_ptr);
+
+/* Synchronous API: functions */
+extern int wrap_ucs_subscribe_sync();
+extern int wrap_ucs_getconfig_sync(const char *config_path, char **file_found);
+extern int wrap_ucs_initialize_sync(const char* file_name);
+extern int wrap_ucs_i2cwrite_sync(uint16_t node, uint8_t *data_ptr, uint8_t data_sz);
diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c new file mode 100644 index 0000000..cf70647 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries. + * Author Tobias Jahnke + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ +#define _GNU_SOURCE +#define AFB_BINDING_VERSION 2 + +#include <string.h> +#include <time.h> +#include <assert.h> +#include <json-c/json.h> +#include <afb/afb-binding.h> + +#include "wrap_volume.h" +#include "wrap_unicens.h" +#include "libmostvolume.h" + +static int wrap_volume_service_timeout_cb(sd_event_source* source, + uint64_t timer __attribute__((__unused__)), + void *userdata __attribute__((__unused__))) { + + uint8_t ret; + + sd_event_source_unref(source); + ret = lib_most_volume_service(); + + if (ret != 0U) { + AFB_ERROR("lib_most_volume_service returns %d", ret); + } + + return 0; +} + +static void wrap_volume_service_cb(uint16_t timeout) { + uint64_t usec; + sd_event_now(afb_daemon_get_event_loop(), CLOCK_BOOTTIME, &usec); + sd_event_add_time( afb_daemon_get_event_loop(), NULL, CLOCK_MONOTONIC, + usec + (timeout*1000), + 250, + wrap_volume_service_timeout_cb, + NULL); +} + +/* Retrieves a new value adapted to a new maximum value. Minimum value is + * always zero. */ +static int wrap_volume_calculate(int value, int max_old, int max_new) { + + if (value > max_old) + value = max_old; + + value = (value * max_new) / max_old; /* calculate range: 0..255 */ + assert(value <= max_new); + + return value; +} + +extern int wrap_volume_init(void) { + + uint8_t ret = 0U; + lib_most_volume_init_t mv_init; + + mv_init.writei2c_cb = &wrap_ucs_i2cwrite; + mv_init.service_cb = wrap_volume_service_cb; + + ret = lib_most_volume_init(&mv_init); + + return ret * (-1); +} + +extern int wrap_volume_master(int volume) { + + int new_value, ret; + + new_value = wrap_volume_calculate(volume, 100, 255); + ret = lib_most_volume_set(LIB_MOST_VOLUME_MASTER, (uint8_t)new_value); + + if (ret != 0) { + AFB_ERROR("wrap_volume_master: volume library not ready."); + ret = ret * (-1); /* make return value negative */ + } + + return ret; +} + +extern int wrap_volume_pcm(int *volume_ptr, int volume_sz) { + + const int MAX_PCM_CHANNELS = 6; + int cnt, ret; + assert(volume_ptr != NULL); + assert(volume_sz <= MAX_PCM_CHANNELS); + + for (cnt = 0; cnt < volume_sz; cnt ++) { + + int new_value = wrap_volume_calculate(volume_ptr[cnt], 100, 255); + ret = lib_most_volume_set((enum lib_most_volume_channel_t)cnt, (uint8_t)new_value); + + if (ret != 0) { + AFB_ERROR("wrap_volume_pcm: volume library not ready."); + ret = ret * (-1); /* make return value negative */ + break; + } + } + + return ret; +} diff --git a/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h new file mode 100644 index 0000000..3378540 --- /dev/null +++ b/HAL-afb/HAL_MOST_UNICENS/wrap_volume.h @@ -0,0 +1,25 @@ +/*
+ * Copyright (C) 2017, Microchip Technology Inc. and its subsidiaries.
+ * Author Tobias Jahnke
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+
+#pragma once
+#include <stdint.h>
+#include <systemd/sd-event.h>
+
+extern int wrap_volume_init(void);
+extern int wrap_volume_master(int volume);
+extern int wrap_volume_pcm(int *volume_ptr, int volume_sz);
|