summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2024-01-02grpc-proxy: Add a prefix tag for debugging messagesquillback_17.1.2quillback_17.1.1quillback_17.1.0quillback_17.0.2quillback_17.0.1quillback_17.0.0quillback/17.1.2quillback/17.1.1quillback/17.1.0quillback/17.0.2quillback/17.0.1quillback/17.0.017.1.217.1.117.1.017.0.217.0.117.0.0Marius Vlad1-1/+1
Bug-AGL: SPEC-4977 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib26d0b9f9d47e7d2e2d42b47a9702ba31d03f3b9
2024-01-02grpc-proxy: Re-work bound_ok/bound_fail events handlingMarius Vlad5-280/+166
This bigger patch changes the way gRPC proxy client connects to the server, more specifically how it binds to the same agl_shell interface as the shell client. I debated if this should be split into more pieces but I think it makes more sense to have contained into a single patch as it doesn't make sense to have some bits off and some bits on, as both the server and the client side need to be changed at the same time. This biggest change with this patch is to avoid a potential race condition between the gRPC proxy client and the shell-client, but also to simplify the way the gRPC client connects to the server as there aren't sufficient guards in the server to the provent various corner cases to take place. Rather than attempting to fix that, simplifying the entire bit and allow only a single agl-shell client and a sigle gRPC proxy client connected at a single time and remove any other potential clients trying to connect at all, later on. Context and usage: Both the gRPC proxy and shell-client bind to the same agl_shell interface, meaning that both use the shell-client (homescreen, flutter-ics-homescreen, flutter-auto, wam) and the gRPC proxy can issue agl_shell requests, with some minor differences -- setting background and panels which do not make sense for gRPC proxy client. The compositor can signal back to clients when a bind was OK or not with the bound_ok/bound_fail event. Previously to adding the bound_ok/bound_fail events, any other client trying to use agl_shell interface, more than once, would get a protocol violation. With the bound_ok/bound_fail events clients would instead receive this event and could theoretically act upon it. The race that this patch tries to overcome is that the gRPC client will periodically attempt to verify if there's a shell-client already connected to server by binding to agl_shell interface and waiting for bound_fail event. In case it got bound_ok, it would disconnect and attempt at latter point in time, until it got the bound_failed event, and thus signalling that there's shell client already connected, allowing to proceed further. This worked fine most of the time, depending on how fast the shell client also bind to agl_shell. For a brief period of time, it might be that shell client also gets a bound_fail, requiring it to retry at a later point in time. The disconnected/reconnect of the gRPC proxy would then complicate matters as the client resources will get overwritten. So rather than trying to try that fix that, a better approach is to simplify the way this works entirely. The change in this patch is that the gRPC proxy doesn't connect/disconnect periodically but rather it waits for the compositor to signal when it is ready to bind to agl_shell interface. That happens with the help of the doas event status, from the agl_shell_ext interface. If this event status is alright (OK) then it means the gRPC can then bind to agl_shell interface. If it gets a failed status it would just wait and then issue another doas request and continue as such forever until it got an alright status. The distinct is that in this case the gRPC proxy would not disconnect and then reconnect retrying the same thing. This change to simplify some of the assumption in server, and client side implementation would just race with the shell client when binding to the agl_shell interface. Bug-AGL: SPEC-4977 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib74f789553d3b130ee8e61d0068e617dc2209a58
2023-12-20shell: Provide a better explanation for terminating the connectionMarius Vlad1-5/+7
And make sure we clear off the remaing client resources when doing an unbind. It seems we would hit it when checking set_background/ready/set_panel requests, resulting in a protocol violation and finally terminating the connection. Bug-AGL: SPEC-4977 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ie5ed881511ec2ac4501d2a5cac349abc7f83c1fe
2023-12-15shell: Don't assume an output previously set-upMarius Vlad1-3/+5
This is unlikely to happen in practice, but discovered while doing a code audit, so let's let be on the safe side and don't attempt to deref as we'll get invalid memory. Bug-AGL: SPEC-5018 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib874a7194ab3a7019a304ec4c1974824c78b26cc
2023-11-14meson.build: Bump version to 0.0.22Marius Vlad1-1/+1
We haven't add an official release since the beginning of the year, when we introduced the gRPC API. So do another one, as we've changed a bit the say the gRPC starts. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Idc2feace89a0cd77d1788e629fff9b5f2f443fce
2023-11-03grpc-proxy: Use smaller waiting timeMarius Vlad1-1/+1
This would speed the time checking if agl-shell was bounded or not. Shouldn't make that much of a difference but we do not need to wait 250 ms just for testing that. Bug-AGL: SPEC-4912 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I8751c1d69898a82a415ba9b756bdfe9657ef0546
2023-11-03grpc-proxy: Start the gRPC server and waiting thread much soonerMarius Vlad3-16/+66
This change moves a bit the start-up sequence of the gRPC server and when it connects to the compositor. Changing the start-up sequence avoids waiting for the channel to change its state from disconnected to connected, and only wait for the wayland connection to take place. Otherwise, we would wait first for the wayland connection to take place, then wait for the gRPC server to start up and finally wait for the channel to be in connected state, all which would incur a massive waiting time. Moving it a bit early requires to at least verify that we have the proxy side (the wayland connection) is already set-up at that time. Bug-AGL: SPEC-4912 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ied88a917df8ff98fefa601103ce04e13c8bb21ac
2023-11-03grpc-proxy: Fix missing args LOG()Marius Vlad2-2/+2
These are not seen until enabling the DEBUG directive. Bug-AGL: SPEC-4912 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ic18c701909975978e82ef811ade416d802e567b5
2023-10-27grpc-proxy/main-grpc: Don't fall trough assuming we have a wl_displayMarius Vlad1-1/+4
Maybe the third time is a charm to avoid fall through and assume on the exit path we do have a wl_display. Bug-AGL: SPEC-4935 Reported-by: Lisandro Pérez Meyer <lpmeyer@ics.com> Tested-by: Lisandro Pérez Meyer <lpmeyer@ics.com> Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I4adef5bf72d6b1a32a218bf1cfa6c8ed4450ba48
2023-10-27grpc-proxy: Don't attempt to connect if there's no compositor runningMarius Vlad1-0/+7
Commit d8e72099ecbcad, 'grpc-proxy: Terminate thread when we're exiting', addressed a rather bigger issue to handle correctly the shutdown/restart sequence. A consequence of that is the initial issue opened in SPEC-4935 with a trace showing a protocol issue, due to fact we're supplying an invalid wl_display without being connected to the compositor. While commit d8e72099ecbcad, 'grpc-proxy: Terminate thread when we're exiting' does fix the issue and would make the underlying bug disappear let's be more pedantic and don't attempt assume we have a compositor connection when in fact we do not. Bug-AGL: SPEC-4935 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Id10dabe5178f52fa6a0cf6d70c70799c98f4b6d5
2023-10-24grpc-proxy: Terminate thread when we're exitingMarius Vlad1-0/+1
We need to be joining the thread to be able to exit properly, so let us do that. Bug-AGL: SPEC-4935 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib4e54fcb23267b632f61c10d6ec2835c55ec2f23
2023-08-29grpc-proxy: Add dynamic scale of floating windowsMarius Vlad8-14/+86
This adds basic scaling for floating windows, sending new dimensions to the clients to resize itself. Bug-AGL: SPEC-4862 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ic693153cd704b278dcddd2514afc8dafecf8829b
2023-08-29grpc-proxy: Add dynamic floating window movementMarius Vlad8-11/+83
This adds basic movement for floating type of windows. The window needs to be a floating type for this request to work out. For the agl-shell protocol, this adds a set_app_float() request while for gRPC it adds a SetAppPosition() request. Bug-AGL: SPEC-4863 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I5ecc4257c3e84d15a8cabb183757753be37867f5
2023-08-17desktop: Fix Xwayland buildMarius Vlad1-0/+8
Turns out weston doesn't install xwayland-api header if Xwayland is not installed, which is a shame, and should be rectified. Meanwhile, let's guard access to the header and the API that the header exports. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I77638b263483628f8cc7a3dcbd08c8947db1d86b
2023-08-03compositor: Use the logging context when iterating over scopesMarius Vlad1-1/+1
In accordance to the upstream changes refer to the logging context rather than the compositor instance. Depends on https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29064 Bug-AGL: SPEC-4861 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I4a8aeac4ef33e0631c23ae85347fea8a1b36c4de
2023-07-24layout: Check against app_id being validMarius Vlad1-1/+1
All app_ids are not valid for xwayland type of surfaces to need to check against it. Bug-AGL: SPEC-4847 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I84dc9b493648f4fe48b1c23c8ead0283505acce0
2023-07-24layout: Determine xwayland surface in a generic fashionMarius Vlad3-4/+26
This provides a far better way of determining if the surface is xwayland or not. We can then make sure all X11 clients can be displayed. Bug-AGL: SPEC-4847 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I2140c452c0d37a84323eaf75787eb32a7771a56e
2023-06-21compositor: Add XWayland basic supportMarius Vlad7-25/+333
This allow starting up XWayland and the ability to display, albeit is incomplete, given that we have no way at this moment to make the window maximized, as we do with xdg-shell/native wayland applications. A further patch, together with libweston changes are needed to make this complete. For now this can provide us with initial smoke testing. Tested with basic X11 clients, including Unigine, which is the reason for having this the moment. Note that this at the moment compiled-out, requiring the pass -Dxwayland=true when building the compositor. Bug-AGL: SPEC-4782 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I87d2a852165cb3f03482bea1e04931bdd6d4c115
2023-06-13layout: Give ini config precedence over agl_shellMarius Vlad1-0/+6
The activation area can set-up with agl_shell as well, so give the ini configuration file precedence over the one set-up by agl_shell. Bug-AGL: SPEC-4829 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ifae82b8c29575e7a9a06422588ad6a8cce80946e
2023-06-13shell: Don't reset the activation area alwaysMarius Vlad1-2/+4
Rather than doing that always, be more selective, and perform it if we had already an application active. Bug-AGL: SPEC-4829 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I707f92d1cc1f820af493bae9daa5a948aa452ad8
2023-06-13layout: Add a fallback for reading activation-areaMarius Vlad3-1/+22
This is a temporary work-around for doing another read of the ini file for the activation-area in case we detected that we have one set-up but the activation area is empty. This happens when we're getting the ready() request from the shell client, when we're initializing the layout. Bug-AGL: SPEC-4829 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I152e7cba34b74390de2a46df4799c1fb44441d3f
2023-05-31policy-deny: Remove SMACK supportMarius Vlad3-91/+0
Similar to Waltham, SMACK hasn't been really used and it was actually a compile option, showing as a example the deny policy. The RBA and the allow-all policy still available, and we can revisit the policy mechanism if we plan on switching to SELinux. Bug-AGL: SPEC-4806 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Iedac63585676ebc47201debcf73870cb0538cc09
2023-05-31compositor: Remove Waltham supportMarius Vlad6-237/+0
Waltham hasn't been used in a while, its support has been removed for some time, we've been deprecating it last release so it's time to remove it from the compositor as well. Bug-AGL: SPEC-4669 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Iaf1e467b1228051fd96cac424ac6781d67f9fefa
2023-05-15clients/screenshooter: Add the output name to screenshot nameMarius Vlad1-83/+44
And split the screenshot in multiple files, to match each output. Bug-AGL: SPEC-4788 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I6d9e545c05ff949900f0158720888eb757c2c271
2023-05-04compositor: Let the user know about the debug scopes availableMarius Vlad1-0/+18
Bug-AGL: SPEC-4593 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I79d4447b7768b72712e244504782a33ba257a33d
2023-05-04compositor: Add support for subscribing to libweston scopesMarius Vlad1-1/+32
This brings in support to pass, over the command line, debug scopes that can help out debug issues with HW with other components or with libweston itself. One particular importance is the drm-backend debug scope. Bug-AGL: SPEC-4593 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I7a182ffe0b2b9bfdeced184514283265bb17c607
2023-05-03shell: Add the ability to dynamically move application windowMarius Vlad4-6/+42
So far, we could start an application on a different output, but moving them back-and-worth wasn't really supported. This handles a few use-cases like: - move an application's window from one output to another - install black curtain in case we no longer have any other surfaces on that output; - deactivate and switch to the previous active window in case there's one available - the activation is handled by the shell client, while deactivation is done implicitly by the compositor to simplify the shell client This does a bit of rewording of a function that returns true whenever we have only a single application window on a particular output. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I58cde58c6a2e2dade93566bfd7aff5ed697f5450
2023-05-03layout: Fix no-op check due to invalid checksMarius Vlad1-1/+3
Checking both width and height isn't a strict requirement, either can different. This unties the check such that we can actually move windows/applications between different outputs. We also add here an explicit surface damage as we're removing the view from the layer. Bug-AGL: SPEC-4773 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ie91b8c0fd2e9357fe00fd693e2a70fa3b4b4d31a
2023-05-03desktop: Look for app_ids after the initial commitMarius Vlad1-1/+9
Some applications, set up their app_ids after the initial surface commit, which is too late to move them/place them to a different output. This addresses that in the case the application sets one up, after the initial surface commit. Bug-AGL: SPEC-4759 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I4762af1ba6e8708722385ac06c37486dd4b6aac1
2023-05-03src: Send out the output name for the remote roleMarius Vlad3-2/+9
A while ago we switched to activation-by-default turned off which passes the responsability of activating applications to the shell client. The shell client uses the app_id to indentify the application to display, and the output. The output would normally be hard-coded to the first available output but there is nothing that prevents the shell to display it on other outputs. This patch does just that, it would allow the user use configurable option in the ini file, under the [output], agl-shell-app-id=app_id, by re-using the event from the compositor sent to the shell client to pick up a different output, the one specified in the section entry. Bug-AGL: SPEC-4529 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ieea1a28fe6776ecc691fd38da9b4c3495ac5a5ea
2023-04-27layout: Split remote from desktop roleMarius Vlad4-34/+60
Though there's no difference between the desktop and remote role this would simplify handling, and with it we remove the implicit activation of surfaces, which wasn't addressed when we switched to activate-by-default=false by default. Bug-AGL: SPEC-4673, SPEC-4759, SPEC-4529, SPEC-4756 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ia5e57155ed26c53958e0e9590be04f91c5de1c28
2023-04-27grpc-proxy: Added set_app_output requestMarius Vlad8-10/+145
This is identical to the remote role, but I feel this conveys more information than remote role, as remote denotes that the output is displayed on another device, which it isn't always the case (the system has multiple outputs all connected directly). This introduces two new additions to the agl-shell protocol, a request to use a different output to display/show the application and an event to inform the shell client to use as a map between the application id and its output. The event is necessary to let the shell client know which output to activate the application on. This requests implements a wrapper for gRPC that maps 1-to-1 to the agl-shell request. There's no gRPC subscription similar to the event though. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I070e9fdbafd5616f3a98415193bf846aeaee9a4a
2023-04-06compositor: Don't reuse previous return valuesMarius Vlad1-1/+1
In case we couldn't enable the output do not return early without setting the proper return value. This causes an issue later one, because the signal list isn't initalized, taking down the compositor with a crash. Bug-AGL: SPEC-4734 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ia5ebc226f6b8f702e710a5976c471d04302bcb00
2023-03-15meson.build: Add an explicit weston dependencyMarius Vlad4-3/+4
Required when building the compositor locally, without yocto/OE as weston cflags includes the full path to weston. Bug-AGL: SPEC-4725 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: If3a4e8238cb40c6fbe0db26bd1056fce48243038
2023-03-15meson.build: Remove any prefix assumptionsMarius Vlad1-15/+0
This forces to create a include directory by hand, which we don't seem to be needing. This only affected the cases where we build the compositor locally, without yocto/OE. Bug-AGL: SPEC-4725 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ic279714671809eae2362da9fccaf592f10f2b888
2023-03-03grpc-proxy: Add set_app_fullscreen functionalityMarius Vlad9-8/+157
This implements set_app_fullscreen which clients can set-up before being mapped. The worthwhile change here was the fact that transitioning between fullscreen, normal, and float would cause invalid tracking of the active window when switching between these states. This would make floating operation display the incorrect active window, so in order to reconcile that, we only update the previous surface if it is different that the current active one. Otherwise this fairly similar to set_app_float. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ie912c86ff7ac38d034cf4d97b2adbc5ef47ce9d3
2023-03-03shell: Reset normal state when getting back to maximizedMarius Vlad1-0/+1
When resetting back to normal, maximized state, reset also the state, just in case we might to check it up latter on. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I0107e6963c01bde22a5a3ab30f392cb618a4f258
2023-03-01protocol: Add set_app_normal requestMarius Vlad8-0/+97
This request allows transitioning back from other roles like float/split/fullscreen to regular maximized, normal state. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Id7f04ffee193677621bd32860998457498acc388
2023-03-01protocol, grpc-proxy: Add support for set_app_floatMarius Vlad9-8/+122
Add support for setting a window as float/popup. This allows either the application itself be set-up as float, or from other gRPC clients. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ic7ee8203cd9c4dfcc51b7fc9709f35be504ae9d0
2023-03-01protocol/grpc-proxy: Add deactivate_app requestMarius Vlad4-6/+36
This request will hide the currently active window, and activate either the background or the previously active window. This request mimics the agl-shell-desktop request, actually using the same code path. It only handles regular windows and float/pop-up. Once we add other roles like fullscreen/split we can improve on this. Bug-AGL: SPEC-4673 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I593cda5d008dfc32fe5e3b079fad9450dc1a490d
2023-02-15compositor: Added layout_save/layout_restoreMarius Vlad3-0/+99
In order to send correct dimensions after a hot-plug event, we need to be able to save the area we had before. Note that implies that the connectors do not change names in between hot-plugs, which normally doesn't happen, but it might if udev rules are executed/invoked. We restore based on output name it had previously. Bug-AGL: SPEC-4705 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ice3a127edfc9d356830ba8f0d0a20bb86284d7de
2023-02-15shell: Check for a valid ivi_surfaceMarius Vlad1-1/+2
A hot-plug/re-plug event means we remove the black curtain with it the ivi_surface that hangs out of it, so verify it before assuming there's one installed. Bug-AGL: SPEC-4705 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Iad53ae34b4e15b5962cf984978a65c344aac9200
2023-02-15shell: Check for invalid outputs passed on when activatingMarius Vlad1-4/+14
Connector hot-plugging would generate new wl_output object, which the client might re-use so rather than blindly trusting the client, make sure that the output we're getting is really one suitable. This should avoid getting an incorrect output upon re-plugging in a connector. Bug-AGL: SPEC-4705 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I732283fc16841e0e57ddbec5d8bd2333d5028433
2023-02-15compositor: Fix memleak when disabling the outputMarius Vlad1-0/+1
Turns out we're leaking out the app_ids when disabling the output so turn that memleak off. Bug-AGL: SPEC-4705 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ia2d46ecd1748c078e924d8d6c90bd86e9c49f64c
2023-01-29ivi-compositor: Add support for multiple app_idsMarius Vlad3-8/+29
Verify if more than one app_id is being passed in the agl-shell-app-id to allow more than one appid being placed to that output. Bug-AGL: SPEC-4666 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I79dc77564ffca41148832af597b6836d7d28f686
2023-01-29meson: Deprecate waltham and inform users of thatMarius Vlad2-1/+10
Waltham isn't really used, this is a step forward removing support for it. For now just add an configuration option if users still want to use it. Bug-AGL: SPEC-4670 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I5ec900ef075717b438ef9e41167ad4833b2a8b87
2023-01-29meson: Bump to version 0.0.21Marius Vlad1-2/+2
We should probably cut and update the compositor to a newer version as gRPC support is a big change to have. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Iac400a3d2f0e62c5fe3b2ab0f681ce228a1865db
2023-01-17shell: Reset the area activationMarius Vlad1-0/+3
Re-starting the shell client wouldn't reset the activation area, which might be rather confusing, so better be re-initialize it as to be able to switch in-between various configurations. Bug-AGL: SPEC-4674 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib964ebed2c189f82092ffcf4d54dee2cf22093e1
2023-01-05shell: Verify agl-shell version for bound_ok/bound_failMarius Vlad1-7/+18
Some additional checks to avoid cases where agl-shell is still using the version 1 but we're checking against at least version 2 (where we introduced some additional events). Part of the compat series. Bug-AGL: SPEC-4667 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I4f5d34fd8b9fe6cf6b8097948afebee550f5345d
2023-01-05shell: Add fallback agl-shell version 1Marius Vlad1-0/+5
Turns out I made a mistake making all clients with version 1 not able to bind to agl-shell anymore. Rather than doing that still allow older clients to bind to agl-shell. Bug-AGL: SPEC-4667 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I61224f39dd8b0d96b36695f536eed8e701130877