diff options
Diffstat (limited to 'include/afb/afb-dynapi.h')
| -rw-r--r-- | include/afb/afb-dynapi.h | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/include/afb/afb-dynapi.h b/include/afb/afb-dynapi.h deleted file mode 100644 index 2a26915c..00000000 --- a/include/afb/afb-dynapi.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2016, 2017, 2018 "IoT.bzh" - * Author: José Bollo <jose.bollo@iot.bzh> - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#pragma once - -#include "afb-dynapi-itf.h" - -static inline const char *afb_dynapi_name(struct afb_dynapi *dynapi) -{ - return dynapi->apiname; -} - -static inline void *afb_dynapi_get_userdata(struct afb_dynapi *dynapi) -{ - return dynapi->userdata; -} - -static inline void afb_dynapi_set_userdata(struct afb_dynapi *dynapi, void *userdata) -{ - dynapi->userdata = userdata; -} - -/* - * Send a message described by 'fmt' and following parameters - * to the journal for the verbosity 'level'. - * - * 'file', 'line' and 'func' are indicators of position of the code in source files - * (see macros __FILE__, __LINE__ and __func__). - * - * - * 'level' is defined by syslog standard: - * EMERGENCY 0 System is unusable - * ALERT 1 Action must be taken immediately - * CRITICAL 2 Critical conditions - * ERROR 3 Error conditions - * WARNING 4 Warning conditions - * NOTICE 5 Normal but significant condition - * INFO 6 Informational - * DEBUG 7 Debug-level messages - */ -static inline void afb_dynapi_verbose(struct afb_dynapi *dynapi, int level, const char *file, int line, const char *func, const char *fmt, ...) __attribute__((format(printf, 6, 7))); -static inline void afb_dynapi_verbose(struct afb_dynapi *dynapi, int level, const char *file, int line, const char *func, const char *fmt, ...) -{ - va_list args; - va_start(args, fmt); - dynapi->itf->vverbose(dynapi, level, file, line, func, fmt, args); - va_end(args); -} -static inline void afb_dynapi_vverbose(struct afb_dynapi *dynapi, int level, const char *file, int line, const char *func, const char *fmt, va_list args) -{ - dynapi->itf->vverbose(dynapi, level, file, line, func, fmt, args); -} - -/* - * Retrieves the common systemd's event loop of AFB - */ -static inline struct sd_event *afb_dynapi_get_event_loop(struct afb_dynapi *dynapi) -{ - return dynapi->itf->get_event_loop(dynapi); -} - -/* - * Retrieves the common systemd's user/session d-bus of AFB - */ -static inline struct sd_bus *afb_dynapi_get_user_bus(struct afb_dynapi *dynapi) -{ - return dynapi->itf->get_user_bus(dynapi); -} - -/* - * Retrieves the common systemd's system d-bus of AFB - */ -static inline struct sd_bus *afb_dynapi_get_system_bus(struct afb_dynapi *dynapi) -{ - return dynapi->itf->get_system_bus(dynapi); -} - -/* - * Get the root directory file descriptor. This file descriptor can - * be used with functions 'openat', 'fstatat', ... - */ -static inline int afb_dynapi_rootdir_get_fd(struct afb_dynapi *dynapi) -{ - return dynapi->itf->rootdir_get_fd(dynapi); -} - -/* - * Opens 'filename' within the root directory with 'flags' (see function openat) - * using the 'locale' definition (example: "jp,en-US") that can be NULL. - * Returns the file descriptor or -1 in case of error. - */ -static inline int afb_dynapi_rootdir_open_locale(struct afb_dynapi *dynapi, const char *filename, int flags, const char *locale) -{ - return dynapi->itf->rootdir_open_locale(dynapi, filename, flags, locale); -} - -/* - * Queue the job defined by 'callback' and 'argument' for being executed asynchronously - * in this thread (later) or in an other thread. - * If 'group' is not NUL, the jobs queued with a same value (as the pointer value 'group') - * are executed in sequence in the order of there submission. - * If 'timeout' is not 0, it represent the maximum execution time for the job in seconds. - * At first, the job is called with 0 as signum and the given argument. - * The job is executed with the monitoring of its time and some signals like SIGSEGV and - * SIGFPE. When a such signal is catched, the job is terminated and reexecuted but with - * signum being the signal number (SIGALRM when timeout expired). - * - * Returns 0 in case of success or -1 in case of error. - */ -static inline int afb_dynapi_queue_job(struct afb_dynapi *dynapi, void (*callback)(int signum, void *arg), void *argument, void *group, int timeout) -{ - return dynapi->itf->queue_job(dynapi, callback, argument, group, timeout); -} - -/* - * Tells that it requires the API of "name" to exist - * and if 'initialized' is not null to be initialized. - * Calling this function is only allowed within init. - * Returns 0 in case of success or -1 in case of error. - */ -static inline int afb_dynapi_require_api(struct afb_dynapi *dynapi, const char *name, int initialized) -{ - return dynapi->itf->require_api(dynapi, name, initialized); -} - -/* - * Set the name of the API to 'name'. - * Calling this function is only allowed within preinit. - * Returns 0 in case of success or -1 in case of error. - */ -static inline int afb_dynapi_rename_api(struct afb_dynapi *dynapi, const char *name) -{ - return dynapi->itf->rename_api(dynapi, name); -} - -/* - * Broadcasts widely the event of 'name' with the data 'object'. - * 'object' can be NULL. - * - * For convenience, the function calls 'json_object_put' for 'object'. - * Thus, in the case where 'object' should remain available after - * the function returns, the function 'json_object_get' shall be used. - * - * Calling this function is only forbidden during preinit. - * - * Returns the count of clients that received the event. - */ -static inline int afb_dynapi_broadcast_event(struct afb_dynapi *dynapi, const char *name, struct json_object *object) -{ - return dynapi->itf->event_broadcast(dynapi, name, object); -} - -/* - * Creates an event of 'name' and returns it. - * - * Calling this function is only forbidden during preinit. - * - * See afb_event_is_valid to check if there is an error. - */ -static inline struct afb_eventid *afb_dynapi_make_eventid(struct afb_dynapi *dynapi, const char *name) -{ - return dynapi->itf->eventid_make(dynapi, name); -} - -/** - * Calls the 'verb' of the 'api' with the arguments 'args' and 'verb' in the name of the binding. - * The result of the call is delivered to the 'callback' function with the 'callback_closure'. - * - * For convenience, the function calls 'json_object_put' for 'args'. - * Thus, in the case where 'args' should remain available after - * the function returns, the function 'json_object_get' shall be used. - * - * The 'callback' receives 3 arguments: - * 1. 'closure' the user defined closure pointer 'callback_closure', - * 2. 'status' a status being 0 on success or negative when an error occured, - * 2. 'result' the resulting data as a JSON object. - * - * @param dynapi The dynapi - * @param api The api name of the method to call - * @param verb The verb name of the method to call - * @param args The arguments to pass to the method - * @param callback The to call on completion - * @param callback_closure The closure to pass to the callback - * - * @see also 'afb_req_subcall' - */ -static inline void afb_dynapi_call( - struct afb_dynapi *dynapi, - const char *api, - const char *verb, - struct json_object *args, - void (*callback)(void *closure, int status, struct json_object *result, struct afb_dynapi *dynapi), - void *callback_closure) -{ - dynapi->itf->call(dynapi, api, verb, args, callback, callback_closure); -} - -/** - * Calls the 'verb' of the 'api' with the arguments 'args' and 'verb' in the name of the binding. - * 'result' will receive the response. - * - * For convenience, the function calls 'json_object_put' for 'args'. - * Thus, in the case where 'args' should remain available after - * the function returns, the function 'json_object_get' shall be used. - * - * @param dynapi The dynapi - * @param api The api name of the method to call - * @param verb The verb name of the method to call - * @param args The arguments to pass to the method - * @param result Where to store the result - should call json_object_put on it - - * - * @returns 0 in case of success or a negative value in case of error. - * - * @see also 'afb_req_subcall' - */ -static inline int afb_dynapi_call_sync( - struct afb_dynapi *dynapi, - const char *api, - const char *verb, - struct json_object *args, - struct json_object **result) -{ - return dynapi->itf->call_sync(dynapi, api, verb, args, result); -} - - -static inline int afb_dynapi_new_api( - struct afb_dynapi *dynapi, - const char *api, - const char *info, - int noconcurrency, - int (*preinit)(void*, struct afb_dynapi *), - void *closure) -{ - return dynapi->itf->api_new_api(dynapi, api, info, noconcurrency, preinit, closure); -} - -static inline int afb_dynapi_set_verbs_v2( - struct afb_dynapi *dynapi, - const struct afb_verb_v2 *verbs) -{ - return dynapi->itf->api_set_verbs_v2(dynapi, verbs); -} - -static inline int afb_dynapi_add_verb( - struct afb_dynapi *dynapi, - const char *verb, - const char *info, - void (*callback)(struct afb_request *request), - void *vcbdata, - const struct afb_auth *auth, - uint32_t session) -{ - return dynapi->itf->api_add_verb(dynapi, verb, info, callback, vcbdata, auth, session); -} - - -static inline int afb_dynapi_sub_verb( - struct afb_dynapi *dynapi, - const char *verb) -{ - return dynapi->itf->api_sub_verb(dynapi, verb); -} - - -static inline int afb_dynapi_on_event( - struct afb_dynapi *dynapi, - void (*onevent)(struct afb_dynapi *dynapi, const char *event, struct json_object *object)) -{ - return dynapi->itf->api_set_on_event(dynapi, onevent); -} - - -static inline int afb_dynapi_on_init( - struct afb_dynapi *dynapi, - int (*oninit)(struct afb_dynapi *dynapi)) -{ - return dynapi->itf->api_set_on_init(dynapi, oninit); -} - - -static inline void afb_dynapi_seal( - struct afb_dynapi *dynapi) -{ - dynapi->itf->api_seal(dynapi); -} - - |