2 files changed, 57 insertions, 0 deletions
diff --git a/docs/1. Introduction.md b/docs/1. Introduction.md
index e69de29..f2d088d 100644
--- a/docs/1. Introduction.md
+++ b/docs/1. Introduction.md
@@ -0,0 +1,18 @@
+Introduction
+===================
+
+## Problem
+- Insecure
+- Limited
+- Not fully optimised for use case (ie. Routing Audio to DSP vs. Loopback)
+- Not generic interface for highly configurable hardware
+- 
+
+## Solution
+
+## Added Features
+- Dynamic Runtime Alsa Front end
+- Adjustable Audio Path
+- Mappable Audio Path
+- Secure Audio Routing w/ SMACK
+- 
+\ No newline at end of file
diff --git a/docs/2. Building.md b/docs/2. Building.md
index e69de29..983db8d 100644
--- a/docs/2. Building.md
+++ b/docs/2. Building.md
@@ -0,0 +1,39 @@
+Building AVIRT
+===================================
+
+## Table of Contents
+1. [Out of Tree](#out-of-tree)	
+2. [In Tree](#in-tree)
+
+<a name="out-of-tree"/>
+
+## Out Of Tree
+
+The kernel modules can be built either in-tree, or out-of-tree.
+To build both AVIRT and the dummy Audio Path out-of-tree, use the following command:
+
+```sh
+$ CONFIG_AVIRT=m CONFIG_AVIRT_BUILDLOCAL=y CONFIG_AVIRT_DUMMYAP=m make -C /lib/modules/$(uname -r)/build/ M=$(pwd)
+```
+
+To build both AVIRT and the dummy Audio Path out-of-tree for [AGL](http://docs.automotivelinux.org/) (`aarch64` currently supported), use the [XDS](http://docs.automotivelinux.org/docs/devguides/en/dev/reference/xds/part-1/0_Abstract.html) build system together with the `make_agl.sh` script:
+
+```sh
+$ ./make_agl.sh ${XDS_SDK_ID}
+```
+
+<a name="in-tree"/>
+
+## In tree
+
+
+To build in tree, use the [Fiberdyne Linux fork](https://github.com/fiberdyne/linux), which will automatically clone the AVIRT Driver and required AudioPath modules to the `drivers/staging` directory. You can then turn AVIRT Support on by setting to `<M>`. The drivers can be found here:
+```
+$ make menuconfig
+
+# Navigate to: Device Drivers--->Staging Drivers--->AVIRT Support
+```
+Finally build the kernel with the configuration selected by making.
+```
+$ make
+```
+\ No newline at end of file