summaryrefslogtreecommitdiffstats
path: root/docs/3.Usage.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/3.Usage.md')
-rw-r--r--docs/3.Usage.md140
1 files changed, 140 insertions, 0 deletions
diff --git a/docs/3.Usage.md b/docs/3.Usage.md
new file mode 100644
index 0000000..ba5c3e6
--- /dev/null
+++ b/docs/3.Usage.md
@@ -0,0 +1,140 @@
+Using AVIRT
+===================================
+
+## Introduction
+
+## Table of Contents
+
+1. [Load/Unload AVIRT](#un-load-avirt)
+2. [Configuring AVIRT](#configuring-avirt)
+3. [Checking AVIRT](#checking-avirt)
+
+<a name="un-load-avirt"/>
+
+## 1. Loading and Unloading AVIRT
+
+### Load Out of Tree
+
+As root, load the required `avirt_core.ko` and subsequent audio path.
+As an example, the Dummy Audiopath is being loaded here.
+
+```sh
+insmod snd-avirt-core.ko
+insmod dummy/snd-avirt-ap-dummy.ko
+insmod loopback/snd-avirt-ap-loopback.ko
+```
+
+### Note:
+
+The loading and unloading of drivers can be performed using the helper scripts.
+To run, we must load the kernel modules using the `scripts/load.sh` script:
+
+```sh
+$ ./scripts/load.sh
+```
+
+To unload the drivers use:
+
+```sh
+$ ./scripts/unload.sh
+```
+
+### Load In Tree
+
+#### Note:
+
+Either build the module in tree, or you can copy the modules manually and then run `depmod` to generate dependencies.
+For example, in AGL:
+
+```sh
+mkdir -p /lib/modules/$(uname -r)/extra
+cp snd-avirt-core.ko snd-avirt-ap-dummy.ko snd-avirt-ap-loopback.ko /lib/modules/$(uname -r)/extra
+depmod
+```
+
+Once the modules are in place, we can load the modules using:
+
+```sh
+modprobe snd-avirt-core
+modprobe snd-avirt-ap-dummy
+modprobe snd-avirt-ap-loopback
+```
+
+<a name="configure-avirt" />
+
+## 2. Configuring AVIRT
+
+AVIRT is configured using configfs.
+
+### Note:
+
+A sample script for the following is supplied inside the `scripts` folder.
+
+First, verify the kernel supports the use of configfs.
+
+```sh
+fgrep configfs /proc/filesystems
+```
+
+The expected output is:
+
+```
+nodev configfs
+```
+
+Once confirmed, we can mount the `configfs` filesystem at the conventional point:
+
+```sh
+# Check configfs is mounted on the system
+mkdir -p /config
+mount -t configfs none /config
+```
+
+Finally, we can configure AVIRT, for example:
+
+```sh
+# Set up each of the cards channels
+mkdir /config/snd-avirt/streams/playback_media
+echo "2">/config/snd-avirt/streams/playback_media/channels
+echo "ap_dummy">/config/snd-avirt/streams/playback_media/map
+
+mkdir /config/snd-avirt/streams/playback_navigation
+echo "1">/config/snd-avirt/streams/playback_navigation/channels
+echo "ap_dummy">/config/snd-avirt/streams/playback_navigation/map
+
+mkdir /config/snd-avirt/streams/playback_emergency
+echo "1">/config/snd-avirt/streams/playback_emergency/channels
+echo "ap_dummy">/config/snd-avirt/streams/playback_emergency/map
+
+mkdir /config/snd-avirt/streams/capture_voice
+echo "1">/config/snd-avirt/streams/capture_voice/channels
+echo "ap_dummy">/config/snd-avirt/streams/capture_voice/map
+
+# Finally, seal the card, and initiate configuration
+echo "1">/config/snd-avirt/streams/sealed
+```
+
+Alternatively, the test script at `scripts/test_configfs.sh` can be used.
+
+The user-space library, [libavirt](https://github.com/fiberdyne/libavirt) can be used to interact with the configfs interface. Please refer to the README in libavirt for further details.
+
+<a name="checking-avirt" />
+
+## 3. Checking AVIRT Loaded Correctly
+
+We can see the newly created streams by using the `aplay` utility. For example, the device list might look a little like this:
+
+```sh
+aplay -l
+...
+card 2: avirt [avirt], device 0: multimedia [multimedia]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
+card 2: avirt [avirt], device 1: navigation [navigation]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
+card 2: avirt [avirt], device 2: emergency [emergency]
+ Subdevices: 1/1
+ Subdevice #0: subdevice #0
+...
+```