CMake Section: Complete re-write.

Completely re-wrote the section.  New file names that do
not use the numbers also.

Change-Id: I443feb41cf83d760a57179473439e89e7b71f9c5
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>

1 files changed, 0 insertions, 138 deletions

diff --git a/docs/dev_guide/2-configuring-cmake.md b/docs/dev_guide/2-configuring-cmake.md
deleted file mode 100755
index 12842ac..0000000
--- a/docs/dev_guide/2-configuring-cmake.md
+++ /dev/null
@@ -1,138 +0,0 @@
-# Configuring CMake Templates
-
-Configuration consists of editing the `config.cmake` file for your
-specific project.
-
-## Creating Your `config.cmake` File
-
-First, you need to create a `confd/cmake` file in your CMake project
-directory.
-
-```bash
-mkdir -p conf.d/cmake
-```
-
-Next, use one of the following commands to copy a `cmake.sample` file to
-your `config.cmake` file.
-The first command applies if you have the SDK installed, while the
-second command applies if you installed the modules on your native Linux system.
-
-**NOTE:** The `OECORE_NATIVE_SYSROOT` variable is defined once you have
-a project folder, the AGL SDK source files, and the CMake modules installed.
-
-```bash
-mkdir -p conf.d/cmake
-# From the SDK sysroot >= RC2 of the 7.0.0 Guppy release
-cp ${OECORE_NATIVE_SYSROOT}/usr/share/doc/CMakeAfbTemplates/samples.d/config.cmake.sample conf.d/cmake/config.cmake
-# From a native installation
-cp /usr/share/doc/CMakeAfbTemplates/samples.d/config.cmake.sample conf.d/cmake/config.cmake
-```
-
-Once you have created your `config.cmake` file, you need to make the changes
-specific to your project.
-
-## Creating Your `CMakeLists.txt` File
-
-To create this file, use the example in the **cmake module**.
-Use one of the following two commands to create your file.
-The first command applies if you have the SDK installed, while the
-second command applies if you installed the modules on your native Linux system.
-
-**NOTE:** The `OECORE_NATIVE_SYSROOT` variable is defined once you have
-a project folder, the AGL SDK source files, and the CMake modules installed.
-
-```bash
-# From the SDK sysroot >= RC2 of the 7.0.0 Guppy release
-cp ${OECORE_NATIVE_SYSROOT}/usr/share/doc/CMakeAfbTemplates/samples.d/CMakeLists.txt.sample CMakeLists.txt
-# From a native installation
-cp /usr/share/doc/CMakeAfbTemplates/samples.d/CMakeLists.txt.sample CMakeLists.txt
-```
-
-## Creating Your CMake Targets
-
-Creating a CMake target is the result of editing your `CMakeLists.txt` file.
-
-For each target that is part of your project, you need to use the
-***PROJECT_TARGET_ADD*** statement.
-Using this statement includes the target in your project.
-
-Using the ***PROJECT_TARGET_ADD*** statement makes the CMake ***TARGET_NAME***
-variable available until the next ***PROJECT_TARGET_ADD*** statement is
-encountered that uses a new target name.
-
-Following is typical use within the `CMakeLists.txt` file to create a target:
-
-```cmake
-PROJECT_TARGET_ADD(target_name) --> Adds *target_name* to the project.
-*target_name* is a sub-folder in the CMake project.
-
-add_executable/add_library(${TARGET_NAME}.... --> Defines the target sources.
-
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES.... --> Configures the target properties
-so they can be used by macros.
-
-INSTALL(TARGETS ${TARGET_NAME}....
-```
-
-## Target Properties
-
-Target properties are used to determine the nature of the
-target and where the target is stored within the package being built.
-
-Use the **LABELS** property to specify the target type that you want
-included in the widget package.
-You can choose the following target types:
-
-Choose between:
-
-- **BINDING**: A shared library loaded by the AGL Application Framework.
-- **BINDINGV2**: A shared library loaded by the AGL Application Framework.
-  This library must be accompanied by a JSON file named similar to the
-  *${OUTPUT_NAME}-apidef* of the target, which describes the API with OpenAPI
-  syntax (e.g: *mybinding-apidef*).
-  Alternatively, you can choose the name without the extension using the
-  **set_openapi_filename** macro.
-  If you use C++, you must set **PROJECT_LANGUAGES** through *CXX*.
-- **BINDINGV3**: A shared library loaded by the AGL Application Framework.
-  This library must be accompanied by a JSON file named similar to the
-  *${OUTPUT_NAME}-apidef* of the target, which describes the API with OpenAPI
-  syntax (e.g: *mybinding-apidef*).
-  Alternatively, you can choose the name without the extension using the
-  **set_openapi_filename** macro.
-  If you use C++, you must set **PROJECT_LANGUAGES** through *CXX*.
-- **PLUGIN**: A shared library meant to be used as a binding plugin, which
-  would load the library as a plugin consequently extending its
-  functionalities.
-  You should name the binding using a special extension that you choose
-  with `SUFFIX cmake target property`.
-  If you do not use the special extension, it defaults to **.ctlso**.
-- **HTDOCS**: The root directory of a web application.
-  This target has to build its directory and puts its files in the
-  **${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}**.
-- **DATA**: Resources used by your application.
-  This target has to build its directory and puts its files in the
-  **${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}**.
-- **EXECUTABLE**: The entry point of your application executed by the AGL
-  Application Framework.
-- **LIBRARY**: An external third-party library bundled with the binding.
-  The library is bundled in this manner because the platform does not
-  provide bundling.
-- **BINDING-CONFIG**: Any files used as configuration by your binding.
-
-**TIP:** you should use the prefix _afb-_ (**Application Framework Binding**)
-with your *BINDING* targets.
-
-Following is an example that uses the **BINDINGV3** property:
-
-```cmake
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES
-	PREFIX "afb-"
-	LABELS "BINDINGV3"
-	OUTPUT_NAME "file_output_name")
-```
-
-**CAUTION**: You do not need to specify an **INSTALL** command for these
-targets.
-Installation is performed by the template.
-Targets are installed in the **${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}**
-directory.