diff options
Diffstat (limited to 'cmake/cmake.d/03-macros.cmake')
| -rw-r--r-- | cmake/cmake.d/03-macros.cmake | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/cmake/cmake.d/03-macros.cmake b/cmake/cmake.d/03-macros.cmake new file mode 100644 index 0000000..62e5790 --- /dev/null +++ b/cmake/cmake.d/03-macros.cmake @@ -0,0 +1,361 @@ +########################################################################### +# Copyright 2015, 2016, 2017 IoT.bzh +# +# author: Fulup Ar Foll <fulup@iot.bzh> +# contrib: Romain Forlot <romain.forlot@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +########################################################################### + +#-------------------------------------------------------------------------- +# WARNING: +# Do not change this cmake template +# Customise your preferences in "./conf.d/cmake/config.cmake" +#-------------------------------------------------------------------------- +# Generic useful macro +# ----------------------- +macro(PROJECT_TARGET_ADD TARGET_NAME) + set_property(GLOBAL APPEND PROPERTY PROJECT_TARGETS ${TARGET_NAME}) + set(TARGET_NAME ${TARGET_NAME}) +endmacro(PROJECT_TARGET_ADD) + +macro(PROJECT_PKGDEP_ADD PKG_NAME) + set_property(GLOBAL APPEND PROPERTY PROJECT_PKG_DEPS ${PKG_NAME}) +endmacro(PROJECT_PKGDEP_ADD) + +macro(defstr name value) + add_definitions(-D${name}=${value}) +endmacro(defstr) + +macro(configure_files_in_dir dir) + file(GLOB filelist "${dir}/*in") + foreach(file ${filelist}) + get_filename_component(filename ${file} NAME) + string(REGEX REPLACE "target" "${RSYNC_TARGET}" destinationfile ${filename}) + string(REGEX REPLACE ".in$" "" destinationfile ${destinationfile}) + configure_file(${file} ${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile}) + set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile}") + endforeach() +endmacro(configure_files_in_dir) + +# Create custom target dedicated for HTML5 and DATA AGL target type +macro(add_input_files INPUT_FILES) + add_custom_target(${TARGET_NAME} + DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + ) + + add_custom_command(TARGET ${TARGET_NAME} + PRE_BUILD + WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} + COMMAND [ -f *xml ] && ${XML_CHECKER} ${INPUT_FILES} + COMMAND [ -f *lua ] && ${LUA_CHECKER} ${INPUT_FILES} + COMMAND [ -f *json ] && for f in ${INPUT_FILES}; do cat ${INPUT_FILES} | ${JSON_CHECKER}; done + ) + + add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + DEPENDS ${INPUT_FILES} + OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + COMMAND touch ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + COMMAND cp -r ${INPUT_FILES} ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME} + ) +endmacro() + +# Set the name of the OPENAPI definition JSON file for binding v2 +macro(set_openapi_filename openapi_filename) + set(OPENAPI_DEF ${openapi_filename} CACHE STRING "OpenAPI JSON file name used to generate binding header file before building a binding v2 target.") +endmacro() + +# Pre-packaging +macro(project_targets_populate) + # Default Widget default directory + set(PACKAGE_BINDIR ${PROJECT_PKG_BUILD_DIR}/bin) + set(PACKAGE_ETCDIR ${PROJECT_PKG_BUILD_DIR}/etc) + set(PACKAGE_LIBDIR ${PROJECT_PKG_BUILD_DIR}/lib) + set(PACKAGE_HTTPDIR ${PROJECT_PKG_BUILD_DIR}/htdocs) + set(PACKAGE_DATADIR ${PROJECT_PKG_BUILD_DIR}/data) + + add_custom_command(OUTPUT ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR} + COMMAND mkdir -p ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR}) + add_custom_target(populate DEPENDS ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR}) + get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS) + foreach(TARGET ${PROJECT_TARGETS}) + get_target_property(T ${TARGET} LABELS) + if(T) + # Declaration of a custom command that will populate widget tree with the target + set(POPULE_PACKAGE_TARGET "project_populate_${TARGET}") + + get_target_property(P ${TARGET} PREFIX) + get_target_property(BD ${TARGET} BINARY_DIR) + get_target_property(SD ${TARGET} SOURCE_DIR) + get_target_property(OUT ${TARGET} OUTPUT_NAME) + + if(P MATCHES "NOTFOUND$") + if (${T} STREQUAL "BINDING") + set(P "lib") + else() + set(P "") + endif() + endif() + + if(${T} STREQUAL "BINDING") + list(APPEND BINDINGS_LIST "${P}${OUT}") + add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so + DEPENDS ${BD}/${P}${OUT}.so + COMMAND mkdir -p ${PACKAGE_LIBDIR} + COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR} + ) + add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so) + add_dependencies(populate ${POPULE_PACKAGE_TARGET}) + add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET}) + elseif(${T} STREQUAL "BINDINGV2") + add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so + DEPENDS ${BD}/${P}${OUT}.so + COMMAND mkdir -p ${PACKAGE_LIBDIR} + COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR} + ) + add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so) + + if (OPENAPI_DEF) + add_custom_command(OUTPUT ${SD}/${OPENAPI_DEF}.h + DEPENDS ${SD}/${OPENAPI_DEF}.json + COMMAND afb-genskel ${SD}/${OPENAPI_DEF}.json > ${SD}/${OPENAPI_DEF}.h + ) + add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OPENAPI_DEF}.h + COMMENT "Generating OpenAPI header file ${OPENAPI_DEF}.h") + add_dependencies(${TARGET} "${TARGET}_GENSKEL") + else() + add_custom_command(OUTPUT ${SD}/${OUT}-apidef.h + DEPENDS ${SD}/${OUT}-apidef.json + COMMAND afb-genskel ${SD}/${OUT}-apidef.json > ${SD}/${OUT}-apidef.h + ) + add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OUT}-apidef.h + COMMENT "Generating OpenAPI header file ${OUT}-apidef.h") + add_dependencies(${TARGET} "${TARGET}_GENSKEL") + endif() + elseif(${T} STREQUAL "EXECUTABLE") + add_custom_command(OUTPUT ${PACKAGE_BINDIR}/${P}${OUT} + DEPENDS ${BD}/${P}${OUT} + COMMAND mkdir -p ${PACKAGE_BINDIR} + COMMAND cp ${BD}/${P}${OUT} ${PACKAGE_BINDIR} + ) + add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_BINDIR}/${P}${OUT}) + add_dependencies(populate ${POPULE_PACKAGE_TARGET}) + add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET}) + elseif(${T} STREQUAL "HTDOCS") + add_custom_command(OUTPUT ${PACKAGE_HTTPDIR}-xx + DEPENDS ${BD}/${P}${OUT} + COMMAND mkdir -p ${PACKAGE_HTTPDIR} + COMMAND touch ${PACKAGE_HTTPDIR} + COMMAND cp -r ${BD}/${P}${OUT}/* ${PACKAGE_HTTPDIR} + ) + add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_HTTPDIR}-xx) + add_dependencies(populate ${POPULE_PACKAGE_TARGET}) + add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET}) + elseif(${T} STREQUAL "DATA") + add_custom_command(OUTPUT ${PACKAGE_DATADIR}-xx + DEPENDS ${BD}/${P}${OUT} + COMMAND mkdir -p ${PACKAGE_DATADIR} + COMMAND touch ${PACKAGE_DATADIR} + COMMAND cp -r ${BD}/${P}${OUT}/* ${PACKAGE_DATADIR} + ) + add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_DATADIR}-xx) + add_dependencies(populate ${POPULE_PACKAGE_TARGET}) + add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET}) + endif(${T} STREQUAL "BINDING") + elseif(${CMAKE_BUILD_TYPE} MATCHES "[Dd][Ee][Bb][Uu][Gg]") + MESSAGE("${Yellow}.. Warning: ${TARGET} ignored when packaging.${ColourReset}") + endif() + endforeach() +endmacro(project_targets_populate) + +macro(remote_targets_populate) + if (DEFINED ENV{RSYNC_TARGET}) + set (RSYNC_TARGET $ENV{RSYNC_TARGET}) + endif() + if (DEFINED ENV{RSYNC_PREFIX}) + set (RSYNC_PREFIX $ENV{RSYNC_PREFIX}) + endif() + + set( + REMOTE_LAUNCH "Test on target with: ${CMAKE_CURRENT_BINARY_DIR}/target/start-on-${RSYNC_TARGET}.sh" + CACHE STRING "Command to start ${PROJECT_NAME} on remote target ${RSYNC_TARGET}" + ) + + if(NOT RSYNC_TARGET OR NOT RSYNC_PREFIX) + message ("${Yellow}.. Warning: RSYNC_TARGET RSYNC_PREFIX not defined 'make remote-target-populate' not instanciated${ColourReset}") + add_custom_target(remote-target-populate + COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make remote-target-populate'${ColourReset}" + COMMAND exit -1 + ) + else() + set(BINDINGS_REGEX "not_set") + if(DEFINED BINDINGS_LIST) + list(LENGTH BINDINGS_LIST BINDINGS_LIST_LENGTH) + if(BINDINGS_LIST_LENGTH EQUAL 1) + list(GET BINDINGS_LIST 0 BINDINGS_REGEX) + string(APPEND BINDINGS_REGEX ".so") + elseif(BINDINGS_LIST_LENGTH GREATER 1) + foreach(B IN LISTS BINDINGS_LIST) + STRING(APPEND BINDINGS_STR "${B}|") + endforeach() + STRING(REGEX REPLACE "^(.*)\\|$" "(\\1).so" BINDINGS_REGEX ${BINDINGS_STR}) + endif() + endif() + + configure_files_in_dir(${TEMPLATE_DIR}) + configure_files_in_dir(${TEMPLATE_DIR}) + + add_custom_target(remote-target-populate + COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/*.sh + COMMAND rsync -e "ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null" --archive --delete ${PROJECT_PKG_BUILD_DIR}/ ${RSYNC_TARGET}:${RSYNC_PREFIX}/${PROJECT_NAME} + COMMENT "${REMOTE_LAUNCH}" + ) + add_dependencies(remote-target-populate populate) + endif() +endmacro(remote_targets_populate) + +macro(wgt_package_build) + if(NOT EXISTS ${WIDGET_CONFIG_TEMPLATE}) + MESSAGE(FATAL_ERROR "${Red}WARNING ! Missing mandatory files to build widget file.\nYou need a config.xml template: please specify WIDGET_CONFIG_TEMPLATE correctly.${ColourReset}") + endif() + if(NOT WIDGET_TYPE) + MESSAGE(FATAL_ERROR "WIDGET_TYPE must be set in your config.cmake.\neg.: set(WIDGET_TYPE application/vnd.agl.service)") + endif() + if(NOT DEFINED PROJECT_ICON) + if( ${WIDGET_TYPE} MATCHES "agl.native") + set(PROJECT_ICON ${PKG_APP_TEMPLATE_DIR}/wgt/icon-native.png) + elseif( ${WIDGET_TYPE} MATCHES "agl.service") + set(PROJECT_ICON ${PKG_APP_TEMPLATE_DIR}/wgt/icon-service.png) + elseif( ${WIDGET_TYPE} MATCHES "x-executable") + set(PROJECT_ICON ${PKG_APP_TEMPLATE_DIR}/wgt/icon-qml.png) + elseif( ${WIDGET_TYPE} MATCHES "text/html") + set(PROJECT_ICON ${PKG_APP_TEMPLATE_DIR}/wgt/icon-html5.png) + else() + set(PROJECT_ICON ${PKG_APP_TEMPLATE_DIR}/wgt/icon-default.png) + endif() + endif() + + if(NOT WIDGET_ENTRY_POINT) + set(WIDGET_ENTRY_POINT lib) + endif() + + add_custom_command(OUTPUT ${PROJECT_PKG_BUILD_DIR}/config.xml + COMMAND ${CMAKE_COMMAND} -DINFILE=${WIDGET_CONFIG_TEMPLATE} -DOUTFILE=${PROJECT_PKG_BUILD_DIR}/config.xml -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND cp ${TEMPLATE_DIR}/icon-default.png ${PROJECT_PKG_BUILD_DIR}/${PROJECT_ICON} + + ) + add_custom_target(packaging_wgt DEPENDS ${PROJECT_PKG_BUILD_DIR}/config.xml) + + # Fulup ??? copy any extra file in wgt/etc into populate package before building the widget + file(GLOB PROJECT_CONF_FILES "${TEMPLATE_DIR}/etc/*") + if(${PROJECT_CONF_FILES}) + file(COPY "${TEMPLATE_DIR}/etc/*" DESTINATION ${PROJECT_PKG_BUILD_DIR}/etc/) + endif(${PROJECT_CONF_FILES}) + + add_custom_command(OUTPUT ${PROJECT_NAME}.wgt + DEPENDS ${PROJECT_TARGETS} + COMMAND wgtpkg-pack -f -o ${PROJECT_NAME}.wgt ${PROJECT_PKG_BUILD_DIR} + ) + + add_custom_target(widget DEPENDS ${PROJECT_NAME}.wgt) + add_dependencies(widget populate packaging_wgt) + set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.wgt") + + if(NOT RSYNC_TARGET) + message ("${Yellow}.. Warning: RSYNC_TARGET not defined 'make widget-target-install' not instanciated${ColourReset}") + add_custom_target(widget-target-install + COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make widget-target-install'${ColourReset}" + COMMAND exit -1 + ) + else() + configure_files_in_dir(${TEMPLATE_DIR}) + add_custom_target(widget-target-install + DEPENDS widget + COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh + COMMAND ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh + ) +endif() + + if(PACKAGE_MESSAGE) + add_custom_command(TARGET widget + POST_BUILD + COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}") + endif() +endmacro(wgt_package_build) + +macro(rpm_package_build) + add_custom_command(OUTPUT ${NPKG_PROJECT_NAME}.spec + DEPENDS ${PROJECT_TARGETS} + archive + packaging + COMMAND rpmbuild --define=\"%_sourcedir ${PROJECT_PKG_ENTRY_POINT}\" -ba ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec + ) + + add_custom_target(rpm DEPENDS ${NPKG_PROJECT_NAME}.spec) + add_dependencies(rpm populate packaging) + + if(PACKAGE_MESSAGE) + add_custom_command(TARGET rpm + POST_BUILD + COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}") + endif() +endmacro(rpm_package_build) + +macro(deb_package_build) +#TODO +endmacro(deb_package_build) + +macro(project_package_build) + if(EXISTS ${TEMPLATE_DIR}) + rpm_package_build() + endif() + + if(EXISTS ${TEMPLATE_DIR}) + wgt_package_build() + endif() + + if(EXISTS ${TEMPLATE_DIR}) + deb_package_build() + endif() +endmacro(project_package_build) + +macro(project_subdirs_add) + set (ARGSLIST ${ARGN}) + list(LENGTH ARGSLIST ARGSNUM) + if(${ARGSNUM} GREATER 0) + file(GLOB filelist "${ARGV0}") + else() + file(GLOB filelist "*") + endif() + + foreach(filename ${filelist}) + if(EXISTS "${filename}/CMakeLists.txt") + add_subdirectory(${filename}) + endif(EXISTS "${filename}/CMakeLists.txt") + endforeach() +endmacro(project_subdirs_add) + +# Print developer helper message when build is done +# ------------------------------------------------------- +macro(project_closing_msg) + get_property(PROJECT_TARGETS_SET GLOBAL PROPERTY PROJECT_TARGETS SET) + get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS) + if(CLOSING_MESSAGE AND ${PROJECT_TARGETS_SET}) + add_custom_target(${PROJECT_NAME}_build_done ALL + COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${CLOSING_MESSAGE}" + ) + add_dependencies(${PROJECT_NAME}_build_done + ${DEPENDENCIES_TARGET} ${PROJECT_TARGETS}) + endif() +endmacro() |