diff options
Diffstat (limited to 'cmake/extra_targets.cmake')
| -rw-r--r-- | cmake/extra_targets.cmake | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/cmake/extra_targets.cmake b/cmake/extra_targets.cmake new file mode 100644 index 0000000..7ff038b --- /dev/null +++ b/cmake/extra_targets.cmake @@ -0,0 +1,152 @@ +########################################################################### +# Copyright 2015, 2016, 2017 IoT.bzh +# +# author: Fulup Ar Foll <fulup@iot.bzh> +# contrib: Romain Forlot <romain.forlot@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +########################################################################### + + +#-------------------------------------------------------------------------- +# WARNING: +# Do not change this cmake template +# Customise your preferences in "./etc/config.cmake" +#-------------------------------------------------------------------------- + +# Add a dummy target to enable global dependency order +# ----------------------------------------------------- +if(EXTRA_DEPENDENCIES_ORDER) + set(DEPENDENCIES_TARGET ${PROJECT_NAME}_extra_dependencies) + add_custom_target(${DEPENDENCIES_TARGET} ALL + DEPENDS ${EXTRA_DEPENDENCY_ORDER} + ) +endif() + +# Add RSYNCTARGET +remote_targets_populate() + +#Archive project +add_custom_command(OUTPUT ${ARCHIVE_OUTPUT} + DEPENDS ${PROJECT_TARGETS} + #Create git archive of the main project + COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git archive --format=tar --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/ HEAD -o ${ARCHIVE_OUTPUT_ARCHIVE} + #Create tmp git archive for each submodule + COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git submodule foreach --recursive ${CMD_ARCHIVE_SUBMODULE} + #Concatenate main archive and tmp submodule archive + COMMAND for SUBTAR in ${TMP_ARCHIVE_SUBMODULE}-*.tar\; do tar --concatenate --file=${ARCHIVE_OUTPUT_ARCHIVE} $$SUBTAR\;done + #Remove tmp submodule archive + COMMAND rm -rf ${TMP_ARCHIVE_SUBMODULE}-*.tar + #Compress main archive + COMMAND gzip --force --verbose ${ARCHIVE_OUTPUT_ARCHIVE} +) +add_custom_target(archive DEPENDS ${ARCHIVE_OUTPUT}) + + #Format Build require package + foreach (PKG_CONFIG ${PKG_REQUIRED_LIST}) + #Unset TMP variable + unset(XPREFIX) + unset(XRULE) + unset(RPM_EXTRA_DEP) + unset(DEB_EXTRA_DEP) + #For deb package,add EOL format only for a new line + if(DEB_PKG_DEPS) + set(DEB_PKG_DEPS "${DEB_PKG_DEPS},\n") + endif() + #Get pkg-config rule on version + string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG}) + string(REGEX MATCH "[<>]?=" XRULE ${PKG_CONFIG}) + #Only if pkg-config has rule on version + if(XRULE) + string(REGEX REPLACE ".*[<>]?=" "" XVERS ${PKG_CONFIG}) + set(RPM_EXTRA_DEP " ${XRULE} ${XVERS}") + set(DEB_EXTRA_DEP " (${XRULE} ${XVERS})") + endif() + #Format for rpm package + set(RPM_PKG_DEPS "${RPM_PKG_DEPS}BuildRequires: pkgconfig(${XPREFIX})${RPM_EXTRA_DEP}\n") + #Format for deb package + #Because the tool "dpkg" is used on the packages db to find the + #package providing the pkg-cong file ${XPREFIX}.pc, we need + #to test the OS release package type + if( OSRELEASE MATCHES "debian" ) + execute_process( + COMMAND dpkg -S *${XPREFIX}.pc + OUTPUT_VARIABLE TMP_PKG_BIN + ) + #Need to be harden check + string(REGEX REPLACE ":.*$" "" PKG_BIN ${TMP_PKG_BIN}) + set(DEB_PKG_DEPS "${DEB_PKG_DEPS} ${PKG_BIN} ${DEB_EXTRA_DEP}") + endif() + endforeach() + + if(NOT EXISTS ${RPM_TEMPLATE_DIR}/rpm-config.spec.in) + MESSAGE(FATAL_ERROR "${Red}Missing mandatory files: you need rpm-config.spec.in in ${RPM_TEMPLATE_DIR} folder.${ColourReset}") + endif() + set(PACKAGING_SPEC_OUTPUT ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec) +add_custom_command(OUTPUT ${PACKAGING_SPEC_OUTPUT} + COMMAND ${CMAKE_COMMAND} -DINFILE=${RPM_TEMPLATE_DIR}/rpm-config.spec.in -DOUTFILE=${PACKAGING_SPEC_OUTPUT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + ) + +#Because the tool "dpkg" is used on the packages db to find the +#package providing the pkg-cong file ${XPREFIX}.pc, we need +#to test the OS release package type +if(OSRELEASE MATCHES "debian") + add_custom_command(OUTPUT ${PACKAGING_DEB_OUTPUT_DSC} + ${PACKAGING_DEB_OUTPUT_INSTALL} + ${PACKAGING_DEB_OUTPUT_CHANGELOG} + ${PACKAGING_DEB_OUTPUT_COMPAT} + ${PACKAGING_DEB_OUTPUT_CONTROL} + ${PACKAGING_DEB_OUTPUT_RULES} + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.compat.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_COMPAT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.changelog.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_CHANGELOG} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/deb-config.dsc.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_DSC} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/deb-config.install.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_INSTALL} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.control.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_CONTROL} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.rules.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_RULES} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake + ) + add_custom_target(packaging_deb DEPENDS ${PACKAGING_DEB_OUTPUT_DSC} + ${PACKAGING_DEB_OUTPUT_INSTALL} + ${PACKAGING_DEB_OUTPUT_CHANGELOG} + ${PACKAGING_DEB_OUTPUT_COMPAT} + ${PACKAGING_DEB_OUTPUT_CONTROL} + ${PACKAGING_DEB_OUTPUT_CONTROL} + ${PACKAGING_DEB_OUTPUT_RULES}) +endif() + +add_custom_target(packaging) +add_custom_target(packaging_rpm DEPENDS ${PACKAGING_SPEC_OUTPUT}) +add_dependencies(packaging packaging_rpm) +if(TARGET packaging_wgt) + add_dependencies(packaging packaging_wgt) +endif() +if(OSRELEASE MATCHES "debian") + # Target to add dependencies indirectly to "packaging" target. + add_dependencies(packaging packaging_deb) +endif() + +#Generate a cmake cache file usable by cmake script. +set(CacheForScript ${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake) +#Create a tmp cmake file. +file(WRITE ${CacheForScript} "") + +get_cmake_property(Vars VARIABLES) +foreach(Var ${Vars}) + if(${Var}) + #Replace unwanted char. + string(REPLACE "\\" "\\\\" VALUE ${${Var}}) + string(REPLACE "\n" "\\n" VALUE ${VALUE}) + string(REPLACE "\r" "\\n" VALUE ${VALUE}) + string(REPLACE "\"" "\\\"" VALUE ${VALUE}) + endif() + file(APPEND ${CacheForScript} "set(${Var} \"${VALUE}\")\n") +endforeach() |