Isolate compatibility with old cynara

The compatibility items of the old cynara
librarie are separated and isolated.

The option WITH_CYNARA_COMPAT activates it or not.

Change-Id: Iba77c97d8df31f5f515b57411487943192451ac6
Signed-off-by: José Bollo <jose.bollo@iot.bzh>

18 files changed, 3434 insertions, 0 deletions

diff --git a/compat/include/CMakeLists.txt b/compat/include/CMakeLists.txt
new file mode 100644
index 0000000..6553f89
--- /dev/null
+++ b/compat/include/CMakeLists.txt
@@ -0,0 +1,19 @@
+###########################################################################
+# Copyright (C) 2018 "IoT.bzh"
+#
+# author: José Bollo <jose.bollo@iot.bzh>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###########################################################################
+
+INSTALL(DIRECTORY cynara DESTINATION ${CMAKE_INSTALL_FULL_INCLUDEDIR})
diff --git a/compat/include/cynara/cynara-admin-types.h b/compat/include/cynara/cynara-admin-types.h
new file mode 100644
index 0000000..95d27b9
--- /dev/null
+++ b/compat/include/cynara/cynara-admin-types.h
@@ -0,0 +1,91 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * \file        src/include/cynara-admin-types.h
+ * \author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * \author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * \author      Zofia Abramowska <z.abramowska@samsung.com>
+ * \author      Oskar Switalski <o.switalski@samsung.com>
+ * \version     1.0
+ * \brief       This file contains structs and consts for cynara admin.
+ */
+
+#ifndef CYNARA_ADMIN_TYPES_H
+#define CYNARA_ADMIN_TYPES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \struct cynara_admin_policy
+ * \brief Defines single policy
+ */
+struct cynara_admin_policy {
+    char *bucket;       /**< Name of bucket, in which policy is placed */
+
+    char *client;       /**< Identifier of client (application) */
+    char *user;         /**< Identifier of user */
+    char *privilege;    /**< Privilege name */
+
+    int result;         /**< Result of policy */
+    char *result_extra; /**< Not always used, may contain some additional result data
+                             like e.g. name of bucket in case result == CYNARA_ADMIN_BUCKET */
+};
+
+/**
+ * \struct cynara_admin_policy_descr
+ * \brief Describes policy of type given with result
+ */
+
+struct cynara_admin_policy_descr {
+    int result; /**< Result of policy to describe */
+    char *name; /**< Descriptive name of given policy result */
+};
+
+/**
+ * \name Wildcard
+ * Can replace client, user or privilege name.
+ * WILDCARD matches any string during check procedure from libcynara-client.
+ */
+#define CYNARA_ADMIN_WILDCARD "*"
+
+/**
+ * \name Name of Default Bucket
+ * Default bucket - the one that check starts in.
+ * Default bucket cannot be removed, although its default policy
+ * (which originally is set to DENY) can be changed.
+ */
+#define CYNARA_ADMIN_DEFAULT_BUCKET ""
+
+/**
+ * \name Any
+ * Can replace client, user or privilege name.
+ * ANY matches any string (including WILDCARD) during:
+ *
+ * * policy removal with cynara_admin_erase() function
+ * * listing policies from a single bucket.
+ *
+ * Using ANY as default policy for bucket or as policy type of inserted policy record
+ * is forbidden and will cause CYNARA_API_INVALID_PARAM error.
+ */
+#define CYNARA_ADMIN_ANY "#"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_ADMIN_TYPES_H */
diff --git a/compat/include/cynara/cynara-admin.h b/compat/include/cynara/cynara-admin.h
new file mode 100644
index 0000000..a0ab0c9
--- /dev/null
+++ b/compat/include/cynara/cynara-admin.h
@@ -0,0 +1,460 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * \file        src/include/cynara-admin.h
+ * \author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * \author      Zofia Abramowska <z.abramowska@samsung.com>
+ * \author      Oskar Switalski <o.switalski@samsung.com>
+ * \version     1.0
+ * \brief       This file contains administration APIs of cynara available with libcynara-admin.
+ * \example     cynara-admin.example
+ */
+
+#ifndef CYNARA_ADMIN_H
+#define CYNARA_ADMIN_H
+
+#include <cynara/cynara-admin-types.h>
+#include <cynara/cynara-error.h>
+#include <cynara/cynara-limits.h>
+#include <cynara/cynara-policy-types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \struct cynara_admin
+ * Forward declaration of structure allowing initialization of library
+ * and usage of all libcynara-admin API functions
+ */
+struct cynara_admin;
+
+/**
+ * \brief Initialize cynara-admin structure.
+ *
+ * \par Description:
+ * Initialize cynara-admin library.
+ * Creates structure used in following API calls.
+ *
+ * \par Purpose:
+ * This function must be invoked prior to other admin API calls. It creates structure needed by
+ * other cynara-admin library API functions.
+ *
+ * \par Typical use case:
+ * Once before a service can call other cynara-admin library functions.
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success creates cynara_admin
+ * structure and stores pointer to this structure at memory address passed in pp_cynara_admin
+ * parameter.
+ *
+ * \par Sync (or) async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * Structure cynara_admin created by cynara_admin_initialize() call should be released with
+ * cynara_admin_finish().
+ *
+ * \param[out] pp_cynara_admin address of pointer for created cynara_admin structure.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_initialize(struct cynara_admin **pp_cynara_admin);
+
+/**
+ * \brief Release cynara-admin structure.
+ *
+ * \par Description:
+ * Destroys structure created with cynara_admin_initialize() function.
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara-admin library.
+ *
+ * \par Typical use case:
+ * Function should be called once, when done with cynara-admin library API usage.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structures and destroys cynara_admin structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * No invocations of cynara-admin library API functions are allowed after call to
+ * cynara_admin_finish().
+ *
+ * \param[in] p_cynara_admin cynara_admin structure created in cynara_admin_initialize().
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_finish(struct cynara_admin *p_cynara_admin);
+
+/**
+ * \brief Insert, update or delete policies in cynara database.
+ *
+ * \par Description:
+ * Manages policies in cynara.
+ *
+ * \par Purpose:
+ * This API should be used to insert, update or delete policies in cynara.
+ *
+ * \par Typical use case:
+ * Enables privileged services to alter policies by adding, updating or removing records.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Policies are arranged into buckets. Every policy is defined in context of some bucket identified
+ * with bucket field (string). A bucket consists of policies identified with tripple: (client, user,
+ * privilege), which is a (unique) key within considered bucket.
+ *
+ * Every policy can be one of two types: simple or bucket-pointing policy.
+ *
+ *  * Simple policies have result field with value of CYNARA_ADMIN_DENY or CYNARA_ADMIN_ALLOW.
+ *    result_extra field should be NULL in this case.
+ *  * Bucket-pointing policies have result field with value of CYNARA_ADMIN_BUCKET and name of
+ *    bucket they point to in result_extra field.
+ *
+ *
+ * Type of operation, which is run for every record (single policy) is defined by result field in
+ * cynara_admin_policy structure.
+ *
+ * * In case of CYNARA_ADMIN_DENY or CYNARA_ADMIN_ALLOW a simple policy is updated or inserted into
+ *   cynara database.
+ * * In case of CYNARA_ADMIN_BUCKET, a bucket-pointing policy is updated or inserted into cynara
+ *   database.
+ * * In case of CYNARA_ADMIN_DELETE, a policy is removed from cynara database.
+ *
+ * One call of cynara_admin_set_policies() can manage many different policies in different buckets.
+ * However, considered buckets must exist before referring to them in policies.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * \parblock
+ * When plugin API will be specified, there will be more valid types to pass as result.
+ * Numerical values of defines CYNARA_ADMIN_... may change, so usage of defines names is strongly
+ * recommended.
+ *
+ * Policies size cannot exceed CYNARA_MAX_VECTOR_SIZE excluding last null element and string members
+ * length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[in] policies NULL terminated array of pointers to policy structures.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_set_policies(struct cynara_admin *p_cynara_admin,
+                              const struct cynara_admin_policy *const *policies);
+
+/**
+ * \brief Add, remove or update buckets in cynara database.
+ *
+ * \par Description:
+ * Adds new, updates or removes existing bucket for policies in cynara.
+ *
+ * \par Purpose:
+ * This API should be used to add, remove or update buckets.
+ *
+ * \par Typical use case:
+ * Enables privileged services to alter policies database by adding, updating or removing buckets.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Every bucket has a default policy. During search, if no policy matches the searched key (client,
+ * user, privilege), default policy is returned.
+
+ * Operation run on a single bucket defined with bucket parameter.
+
+ * Operation parameter defines what should happen with bucket. In case of:
+ *  * CYNARA_ADMIN_DENY, a bucket is inserted or updated with CYNARA_ADMIN_DENY default policy;
+ *  * CYNARA_ADMIN_ALLOW, a bucket is inserted or updated with CYNARA_ADMIN_ALLOW default policy;
+ *  * CYNARA_ADMIN_DELETE, a bucket is removed with all policies that were kept in it.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * \parblock
+ * When plugin API will be specified, there will be more valid types to pass as operation / default
+ * policy. Numerical values of defines CYNARA_ADMIN_... may change, so usages of provided consts is
+ * strongly recommended.
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ *
+ * Default bucket identified with CYNARA_ADMIN_DEFAULT_BUCKET exists always. Its default policy
+ * is preset to DENY (can be altered, however). Default bucket cannot be removed.
+ *
+ * Extra parameter will be used to pass additional data to cynara extensions to build more complex
+ * policies, such as ALLOW but for 5 minutes only, or ALLOW if user confirms.
+ * \endparblock
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[in] bucket bucket name
+ * \param[in] operation type of operation (default policy or CYNARA_ADMIN_DELETE)
+ * \param[in] extra additional data for default policy (will be available with cynara extensions)
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_set_bucket(struct cynara_admin *p_cynara_admin, const char *bucket, int operation,
+                            const char *extra);
+
+/**
+ * \brief Raw check client and user access for given privilege without using plugins extensions.
+ *
+ * \par Description:
+ * Raw check client and user access for given privilege without using plugins extensions.
+ *
+ * \par Purpose:
+ * This API should be used to check type of matching policy for check request
+ *
+ * \par Typical use case:
+ * Administrator of cynara want to know, what would cynara return to client, if asked about given
+ * access.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Function works almost the same way as cynara_check() client function.
+ * The differences are:
+ * * user must specify bucket, from which search would be started (in case of cynara_check()
+ *   it is always the default bucket)
+ * * user can specify if search should be recursive: disabling recursive check will constrain search
+ *   to single bucket only, ignoring all policies leading to other buckets (in case of
+ *   cynara_check() search is always recursive)
+ * * when matching policy in cynara is found, its result is returned without being interpreted by
+ *   plugin extensions.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * \parblock
+ * (*result_extra) may be set to NULL, if extra data are not used in matched policy
+ * If (*result_extra) is not NULL, it contains a string allocated by cynara admin library
+ * with malloc(3) function and must be released with free(3) function.
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[in] start_bucket name of bucket where search would start.
+ * \param[in] recursive FALSE (== 0) : single bucket search;
+ *                      TRUE  (!= 0) : search does not ignore policies leading to another buckets.
+ * \param[in] client application or process identifier.
+ * \param[in] user user running client.
+ * \param[in] privilege privilege that is a subject of a check.
+ * \param[out] result placeholder for matched policy type.
+ * \param[out] result_extra placeholder for matched policy additional data (see Important Notes!).
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_check(struct cynara_admin *p_cynara_admin,
+                       const char *start_bucket, const int recursive,
+                       const char *client, const char *user, const char *privilege,
+                       int *result, char **result_extra);
+
+/**
+ * \brief Lists policies from single bucket in cynara database.
+ *
+ * \par Description:
+ * Lists filtered cynara policies from single bucket.
+ *
+ * \par Purpose:
+ * This API should be used to list policies from single bucket.
+ *
+ * \par Typical use case:
+ * List all policies matching defined filter.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Policies are arranged into buckets. Every bucket contains set of policies. Each of policies are
+ * identified with triple {client, user, privilege}. Function lists all policies from single bucket
+ * with matching client, user and privilege names.
+ *
+ * CYNARA_ADMIN_ANY can be used to match any client, user or privilege, e.g.
+ *
+ * List with parameters: {client = CYNARA_ADMIN_ANY, user = "alice", privilege = CYNARA_ADMIN_ANY}
+ * will match all policies related to "alice", so will match {"app1", "alice", "gps"} and
+ * {CYNARA_ADMIN_WILDCARD, "alice", "sms"}, but won't match {"app3", CYNARA_ADMIN_WILDCARD, "call"}.
+ *
+ * List with parameters: {client = "calculator", user = CYNARA_ADMIN_WILDCARD,
+ * privilege = CYNARA_ADMIN_ANY} will match {"calculator", CYNARA_ADMIN_WILDCARD, "sms"} but won't
+ * match {CYNARA_ADMIN_WILDCARD, CYNARA_ADMIN_WILDCARD, "sms"} nor {"calculator", "bob", "sms"}
+ *
+ * Matching policies are returned as NULL terminated array of pointers to cynara_admin_policy
+ * structures.
+ *
+ * If any of: bucket, client, user, privilege, policies is NULL then CYNARA_API_INVALID_PARAM
+ * is returned.
+ *
+ * If there is no bucket with given name CYNARA_API_BUCKET_NOT_FOUND is returned.
+ *
+ * In case of successful call CYNARA_API_SUCCESS is returned and *policies points to newly created
+ * array of pointers to struct cynara_admin_policy. It is responsibility of caller to release:
+ *
+ * * all non-NULL const char* pointers in all cynara_admin_policy structures;
+ * * all pointers to cynara_admin_policy structures kept in *policies array;
+ * * *policies array itself.
+ *
+ * All allocation made by cynara admin library are done with malloc(3) function and must be released
+ * with free(3) function.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[in] bucket name.
+ * \param[in] client filter for client name.
+ * \param[in] user filter for user name.
+ * \param[in] privilege filter for privilege.
+ * \param[out] policies placeholder for NULL terminated array of pointers to policy structures.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_list_policies(struct cynara_admin *p_cynara_admin, const char *bucket,
+                               const char *client, const char *user, const char *privilege,
+                               struct cynara_admin_policy ***policies);
+
+/**
+ * \brief Erase policies matching filter from cynara database.
+ *
+ * \par Description:
+ * Erase policies matching filter from cynara database.
+ *
+ * \par Purpose:
+ * This API should be used to erase multiple policies with some common key part,
+ * e.g. all policies related to given user.
+ *
+ * \par Typical use case:
+ * Erase all policies matching defined filter.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Policies are arranged into buckets. Every bucket contains set of policies. Each of policies are
+ * identified with triple {client, user, privilege}. Function erases all policies with matching
+ * client, user and privilege names.
+ *
+ * There are two modes:
+ * * non-recursive (recursive parameter set to 0) - when policies are erased only from single bucket
+ * * recursive (recursive parameter set to 1) when policies are removed from given start_bucket and
+ * all nested buckets.
+ *
+ * CYNARA_ADMIN_ANY can be used to match any client, user or privilege, e.g.
+ *
+ * Erase with parameters: {client = CYNARA_ADMIN_ANY, user = "alice", privilege = CYNARA_ADMIN_ANY}
+ * will match all policies related to "alice", so will match {"app1", "alice", "gps"} and
+ * {CYNARA_ADMIN_WILDCARD, "alice", "sms"}, but won't match {"app3", CYNARA_ADMIN_WILDCARD, "call"}.
+ *
+ * Erase with parameters: {client = "calculator", user = CYNARA_ADMIN_WILDCARD,
+ * privilege = CYNARA_ADMIN_ANY} will match {"calculator", CYNARA_ADMIN_WILDCARD, "sms"} but won't
+ * match {CYNARA_ADMIN_WILDCARD, CYNARA_ADMIN_WILDCARD, "sms"} nor {"calculator", "bob", "sms"}
+ *
+ * If any of: start_bucket, client, user, privilege, policies is NULL then CYNARA_API_INVALID_PARAM
+ * is returned.
+ *
+ * If there is no bucket with given name CYNARA_API_BUCKET_NOT_FOUND is returned.
+ *
+ * In case of successful call CYNARA_API_SUCCESS is returned.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Important notes:
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[in] start_bucket name of bucket where erase would start.
+ * \param[in] recursive FALSE (== 0) : erase is not recursive (single bucket erase); \n
+ *                      TRUE  (!= 0) : erase follows all policies leading to nested buckets
+ * \param[in] client filter for client name.
+ * \param[in] user filter for user name.
+ * \param[in] privilege filter for privilege.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_erase(struct cynara_admin *p_cynara_admin,
+                       const char *start_bucket, int recursive,
+                       const char *client, const char *user, const char *privilege);
+
+/**
+ * \brief Lists available policies with their name description.
+ *
+ * \par Description:
+ *
+ * Lists available cynara policy results with name description.
+ *
+ * \par Purpose:
+ * This API should be used to list all available policy results
+ * (also from cynara extension plugins).
+ *
+ * \par Typical use case:
+ * Gathering information about possible policy results and presenting them to user (using name
+ * attribute of description). Result can be passed to cynara_admin_set_policies().
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Policies are based on policy result number. Policies can be built in (like primitives: ALLOW,
+ * DENY...) or can be loaded from cynara plugin extensions. This API gives possibility of checking,
+ * which of these result exist in current cynara server and can be presented to user in a readable
+ * way (of course additional translation may be needed).
+ *
+ * Descriptions of existing policy results are returned as NULL terminated array of pointers of
+ * cynara_admin_policy_descr structures.
+ *
+ * Example output could be {{0, "Deny"}, {11, "AskUser"}, {65535, "Allow"}, NULL}
+ *
+ * In case of successful call CYNARA_API_SUCCESS is returned and *descriptions points
+ * to newly created array of pointers to struct cynara_admin_policy_descr. It is responsibility
+ * of caller to release:
+ *
+ * * all non-NULL char* pointers in all cynara_admin_policy_descr structures;
+ * * all pointers to cynara_admin_policy_descr structures kept in *descriptions array;
+ * * *descriptions array itself.
+ *
+ * All allocation made by cynara admin library are done with malloc(3) function and must be released
+ * with free(3) function.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \param[in] p_cynara_admin cynara admin structure.
+ * \param[out] descriptions placeholder for NULL terminated array of pointers of
+ *             description structures.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_admin_list_policies_descriptions(struct cynara_admin *p_cynara_admin,
+                                            struct cynara_admin_policy_descr ***descriptions);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_ADMIN_H */
diff --git a/compat/include/cynara/cynara-agent.h b/compat/include/cynara/cynara-agent.h
new file mode 100644
index 0000000..3e6d4f0
--- /dev/null
+++ b/compat/include/cynara/cynara-agent.h
@@ -0,0 +1,256 @@
+/*
+ *  Copyright (c) 2014-2017 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-agent.h
+ * @author      Adam Malinowski <a.malinowsk2@partner.samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains agent APIs available with libcynara-agent.
+ */
+
+#ifndef CYNARA_AGENT_H
+#define CYNARA_AGENT_H
+
+#include <stdint.h>
+
+#include <cynara/cynara-error.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef uint16_t cynara_agent_req_id;
+typedef struct cynara_agent cynara_agent;
+
+/**
+ * \enum cynara_agent_msg_type
+ * Values specifying type of message.
+ *
+ * \var cynara_agent_msg_type::CYNARA_MSG_TYPE_ACTION
+ * Message of this type indicates its content is a request for performing an action or response to
+ * such request.
+ *
+ * \var cynara_agent_msg_type::CYNARA_MSG_TYPE_CANCEL
+ * Message of this type indicates its content is a request for canceling action or response to such
+ * request.
+ */
+typedef enum {
+    CYNARA_MSG_TYPE_ACTION,
+    CYNARA_MSG_TYPE_CANCEL
+} cynara_agent_msg_type;
+
+/**
+ * \par Description:
+ * Initialize cynara-agent structure.
+ * Create structure used in following API calls.
+ *
+ * \par Purpose:
+ * This API must be used prior to calling other agent API functions.
+ *
+ * \par Typical use case:
+ * Once before other agent API functions are called.
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success returns cynara_agent
+ * structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_agent created by this function should be released with cynara_agent_finish().
+ *
+ * \param[out] pp_cynara_agent Place holder for created cynara_agent structure.
+ * \param[in]  p_agent_type Type (name) of agent used by cynara for communication agent<->plugin.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code on error.
+ */
+int cynara_agent_initialize(cynara_agent **pp_cynara_agent, const char *p_agent_type);
+
+/**
+ * \par Description:
+ * Destroy structure created with cynara_agent_initialize().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara-agent library.
+ *
+ * \par Typical use case:
+ * Once after connection to cynara is not needed.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structure and destroys cynara_agent structure. Connection to
+ * cynara service is closed.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * No other call to cynara-agent library should be made after call to cynara_agent_finish() except
+ * cynara_agent_initialize().
+ *
+ * \param[in] p_cynara_agent cynara_agent structure. If NULL, then the call has no effect.
+ */
+int cynara_agent_finish(cynara_agent *p_cynara_agent);
+
+/**
+ * \par Description:
+ * Get request from cynara service.
+ *
+ * \par Purpose:
+ * This API should be used to get request from cynara service. Request is generated by corresponding
+ * plugin loaded into cynara service.
+ *
+ * \par Typical use case:
+ * Agent waits for request from cynara service. Request may be either ask for performing agent
+ * specific action or ask for canceling such action. Agent calls this function when is ready to
+ * perform or cancel an action.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Function reads data incoming from cynara service and if at least one complete request is ready
+ * then returns with CYNARA_API_SUCCESS code. Request type, request id and specific
+ * plugin data are stored in given arguments. Function returns exactly one request. If there are
+ * more then one requests ready to get then one must call this function multiple times.
+ *
+ * This function is blocking which means that if there is no request from cynara service it will not
+ * return. On success, buffer for plugin specific data is allocated and size is set. Developer is
+ * responsible for freeing this memory using free() function.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * Call to cynara_agent_get_request() needs cynara_agent structure to be created first.
+ * Use cynara_agent_initialize() before calling this function.
+ *
+ * After CYNARA_API_ACCESS_DENIED error is returned agent should be terminated or at least should
+ * not invoke neither cynara_agent_get_request() nor cynara_agent_put_response() functions.
+ * \endparblock
+ *
+ * \param[in]  p_cynara_agent cynara_agent structure.
+ * \param[out] req_type Request type, demand an action or cancel this action.
+ * \param[out] req_id Request identifier used to pair with answer #cynara_agent_put_response() and
+ *                    cancel request.
+ * \param[out] data Plugin specific data. Buffer is allocated in this function and developer is
+ *                  responsible for freeing it using free() function. Buffer is filled with data
+ *                  from corresponding plugin. If there is no enough memory for data
+ *                  CYNARA_API_OUT_OF_MEMORY is returned and all arguments remain untouched.
+ * \param[out] data_size Size of plugin data (bytes count). In case of out of memory this value
+ *                  stays untouched.
+ *
+ * \return CYNARA_API_SUCCESS on successfully read request,
+ *         CYNARA_API_INTERRUPTED when cynara_agent_cancel_waiting() is called during waiting,
+ *         or negative error code otherwise.
+ */
+int cynara_agent_get_request(cynara_agent *p_cynara_agent, cynara_agent_msg_type *req_type,
+                             cynara_agent_req_id *req_id, void **data, size_t *data_size);
+
+/**
+ * \par Description:
+ * Send response to cynara service.
+ *
+ * \par Purpose:
+ * This API should be used to send response to cynara service.
+ *
+ * \par Typical use case:
+ * Agent calls this function when is ready to answer request for action or cancel request.
+ *
+ * \par Method of function operation:
+ * Function sends data to cynara service. Data contains answer for previously got question.
+ * Answer may be of type CYNARA_MSG_TYPE_ACTION or CYNARA_MSG_TYPE_CANCEL. Type is
+ * CYNARA_MSG_TYPE_ACTION when request for an action was processed and answer is ready, or
+ * CYNARA_MSG_TYPE_CANCEL when processing request for an action was interrupted by cancel request.
+ * Agent must send exactly one response per one request and cancel. If request is processed before
+ * cancel message arrives the agent sends action response. If cancel arrives before action request
+ * is processed then agent sends cancel response and drops processing related action.
+ * Request id in response must be the same as request id in corresponding request.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Call to cynara_agent_get_request() needs cynara_agent structure to be created first.
+ * Use cynara_agent_initialize() before calling this function. Also successful call to
+ * cynara_agent_get_request() is needed before calling this function.
+ *
+ * \param[in] p_cynara_agent cynara_agent structure.
+ * \param[in] resp_type Response type - see Method of operation for details.
+ * \param[in] req_id Request identifier obtained from request.
+ * \param[in] data Plugin specific data. If necessary agent should fill this buffer with data
+ *                 directed to plugin.
+ * \param[in] data_size Size of plugin data (bytes count).
+ *
+ * \return CYNARA_API_SUCCESS on successfully read request, or negative error code otherwise.
+ */
+int cynara_agent_put_response(cynara_agent *p_cynara_agent, const cynara_agent_msg_type resp_type,
+                              const cynara_agent_req_id req_id, const void *data,
+                              const size_t data_size);
+
+/**
+ * \par Description:
+ * Break from waiting for cynara service request using cynara_agent_get_request().
+ *
+ * \par Purpose:
+ * This API should be used when cynara_agent_get_request() is blocked and before calling
+ * cynara_agent_finish().
+ *
+ * \par Typical use case:
+ * Agent calls this API, when it wants to gracefully quit.
+ *
+ * \par Method of function operation:
+ * Function notifies cynara_agent_get_request() to stop waiting for request from cynara.
+ * Then cynara_agent_get_request() returns CYNARA_API_INTERRUPTED and no request is fetched.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function can be used only together with cynara_agent_get_request(), otherwise should
+ * be treaded as NOT thread safe.
+ *
+ * \par Important notes:
+ * Call to cynara_agent_cancel_waiting() needs cynara_agent structure to be created first and
+ * cynara_agent_get_request() running.
+ * Use cynara_agent_initialize() before calling this function.
+ *
+ * \param[in] p_cynara_agent cynara_agent structure.
+ * \return CYNARA_API_SUCCESS on successful waiting cancel, or negative error code otherwise.
+ */
+int cynara_agent_cancel_waiting(cynara_agent *p_cynara_agent);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_AGENT_H */
diff --git a/compat/include/cynara/cynara-client-async.h b/compat/include/cynara/cynara-client-async.h
new file mode 100644
index 0000000..78a1313
--- /dev/null
+++ b/compat/include/cynara/cynara-client-async.h
@@ -0,0 +1,645 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-client-async.h
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @author      Marcin Niesluchowski <m.niesluchow@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains asynchronous client APIs of Cynara available
+ *              with libcynara-client-asynchronous.
+ * @example     cynara-client-async.example
+ */
+
+#ifndef CYNARA_CLIENT_ASYNC_H
+#define CYNARA_CLIENT_ASYNC_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include <cynara/cynara-error.h>
+#include <cynara/cynara-limits.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef uint16_t cynara_check_id;
+typedef struct cynara_async cynara_async;
+typedef struct cynara_async_configuration cynara_async_configuration;
+
+/**
+ * \enum cynara_async_status
+ * Values indicating the status of connected cynara socket.
+ *
+ * \var cynara_async_status::CYNARA_STATUS_FOR_READ
+ * Wait for read events on socket.
+ *
+ * \var cynara_async_status::CYNARA_STATUS_FOR_RW
+ * Wait for both read and write events on socket.
+ */
+typedef enum {
+    CYNARA_STATUS_FOR_READ,
+    CYNARA_STATUS_FOR_RW
+} cynara_async_status;
+
+/**
+ * \enum cynara_async_call_cause
+ * Values indicating the reason of cynara_response_callback call.
+ *
+ * \var cynara_async_call_cause::CYNARA_CALL_CAUSE_ANSWER
+ * Callback was called due to response to previous cynara_async_create_request() or
+ * cynara_async_create_simple_request() call.
+ *
+ * \var cynara_async_call_cause::CYNARA_CALL_CAUSE_CANCEL
+ * Callback was called due to request cancellation with cynara_async_cancel_request() call.
+ *
+ * \var cynara_async_call_cause::CYNARA_CALL_CAUSE_FINISH
+ * Callback was called due to cynara_async_finish() call.
+ *
+ * \var cynara_async_call_cause::CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE
+ * Callback was called due to service not available.
+ */
+typedef enum {
+    CYNARA_CALL_CAUSE_ANSWER,
+    CYNARA_CALL_CAUSE_CANCEL,
+    CYNARA_CALL_CAUSE_FINISH,
+    CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE
+} cynara_async_call_cause;
+
+/**
+ * \brief Response_callback is registered once in cynara_async_create_request() or
+ * cynara_async_create_simple_request() and will be triggered exactly once in 4 kinds of situations:
+ *
+ * -# after response is received from cynara service (CYNARA_CALL_CAUSE_ANSWER)
+ * -# when request is canceled with cynara_async_cancel_request() (CYNARA_CALL_CAUSE_CANCEL)
+ * -# when request was pending for response, but cynara_async_finish() was called
+ *    (CYNARA_CALL_CAUSE_FINISH)
+ * -# when connection to cynara service was broken and cannot be established again - probably cynara
+ *    is unoperational (CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE)
+ *
+ * API functions called during this callback with CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE
+ * or CYNARA_CALL_CAUSE_FINISH cause will return CYNARA_API_OPERATION_NOT_ALLOWED.
+ * cynara_async_finish() will be ignored if called from within this callback.
+ *
+ * \param[in] check_id Number identifying check request. Number is generated in
+ *            cynara_async_create_request() or cynara_async_create_simple_request()
+ *            and returned to user. It can be used to match response with sent request.
+ *            Number is valid since cynara_async_create_request() call or
+ *            cynara_async_create_simple_request() call till callback call.
+ *            After that the number can be reused by cynara to run new request.
+ * \param[in] cause Cause of triggering this callback.
+ * \param[in] response Response for created request. Should be ignored if cause is not
+ *            an answer to request (cause != CYNARA_CALL_CAUSE_ANSWER).
+ * \param[in] user_response_data User specific data - passed to cynara library in
+ *            cynara_async_cancel_request() is being only remembered by library.
+ *            Cynara library does not take any actions on this pointer,
+ *            except for giving it back to user in cynara_response_callback.
+ *            After that cynara forgets this data.
+ */
+typedef void (*cynara_response_callback) (cynara_check_id check_id, cynara_async_call_cause cause,
+                                          int response, void *user_response_data);
+
+/**
+ * \brief Callback used by cynara async API when status of cynara socket is changed in
+ * cynara_async_initialize(), cynara_async_check_cache(), cynara_async_create_request(),
+ * cynara_async_create_simple_request(), cynara_async_process(), cynara_async_cancel_request()
+ * or cynara_async_finish().
+ *
+ * File descriptor changes every time cynara library connects or disconnects cynara service.
+ * Status change is triggered when check_request or cancel needs to be send to
+ * cynara service or sending data has finished and there is nothing more to send to cynara
+ * service.
+ *
+ * Note, that provided file descriptor is used internally by libcynara-client-async
+ * so user should not use it in other way than waiting on it in event loop.
+ * In particular user should not write to, read from or close this fd.
+ * CYNARA_API_OPERATION_NOT_ALLOWED will be returned for every api function called in this callback.
+ * cynara_async_finish() will be ignored if called from within this callback.
+ *
+ * \param[in] old_fd Old descriptor which should be unregistered from event loop,
+ *            Special value -1 is used when callback is called after first
+ *            successful connect.
+ * \param[in] new_fd New descriptor which should be registered in event loop,
+ *            Special value -1 is used when cynara_async_finish() is called and
+ *            cynara is disconnected. In this case status should be ignored.
+ * \param[in] status Status indicating which events should be awaited on socket
+ * \param[in] user_status_data User specific data - passed to cynara library in
+ *            cynara_async_initialize() is being only remembered by library.
+ *            Cynara library does not take any actions on this pointer,
+ *            except for giving it back to user in cynara_status_callback.
+ *            Data should be valid at least until cynara_async_finish() is called.
+ */
+typedef void (*cynara_status_callback) (int old_fd, int new_fd, cynara_async_status status,
+                                        void *user_status_data);
+
+/**
+ * \par Description:
+ * Initialize cynara_async_configuration. Create structure used in following configuration
+ * API calls.
+ *
+ * \par Purpose:
+ * For configuration parameter to be used in cynara async initialization function, this API must be
+ * called before any other cynara async configuration API function.
+ * It will create cynara_async_configuration structure, an optional parameter of cynara async
+ * initialization.
+ *
+ * \par Typical use case:
+ * Once before setting parameters of cynara async configuration and passing to
+ * cynara_async_initialize().
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success returns pointer
+ * to created cynara_async_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This as a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_async_configuration created by cynara_async_configuration_create() call
+ * should be released with cynara_async_configuration_destroy().
+ * Structure cynara_async_configuration should be destroyed after passing it to
+ * cynara_async_initialize().
+ *
+ * \param[out] pp_conf Placeholder for created cynara_async_configuration structure.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return negative error code on error
+ */
+int cynara_async_configuration_create(cynara_async_configuration **pp_conf);
+
+/**
+ * \par Description:
+ * Release cynara_async_configuration structure created with cynara_async_configuration_create().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara_async_configuration.
+ *
+ * \par Typical use case:
+ * Once cynara_async_configuration is not needed.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structure and destroys cynara_async_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \param[in] p_conf cynara_async_configuration structure. If NULL, the call has no effect.
+ */
+void cynara_async_configuration_destroy(cynara_async_configuration *p_conf);
+
+/**
+ * \par Description:
+ * Set client cache size.
+ *
+ * \par Purpose:
+ * This API is used to change default number of cached responses returned from cynara.
+ *
+ * \par Typical use case:
+ * Once before setting parameters of cynara async configuration and passing to
+ * cynara_async_initialize().
+ *
+ * \par Method of function operation:
+ * This API initializes cache with given capacity.
+ *
+ * \par Sync (or) Async:
+ * This as a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * After passing cynara_async_configuration to cynara_async_initialize() calling this API will have
+ * no effect.
+ *
+ * \param[in] p_conf cynara_async_configuration structure pointer.
+ * \param[in] cache_size Cache size to be set.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return negative error code on error
+ */
+int cynara_async_configuration_set_cache_size(cynara_async_configuration *p_conf,
+                                              size_t cache_size);
+
+/**
+ * \par Description:
+ * Initialize cynara-async-client library with given configuration. Create structure used in
+ * following API calls and register callback and user_status_data for
+ * further cynara async API calls.
+ *
+ * \par Purpose:
+ * This API must be used prior to calling any other cynara async API function.
+ * It will create cynara_async structure required for any other cynara async API calls.
+ *
+ * \par Typical use case:
+ * Once before entering event loop and before any other cynara async API is called.
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success
+ * returns cynara_async structure.
+ *
+ * \par Sync (or) Async:
+ * This is an synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_async created by cynara_async_initialize() call should be released
+ * with cynara_async_finish().
+ *
+ * \param[out] pp_cynara Placeholder for created cynara_async structure.
+ * \param[in] p_conf Configuration for cynara-async-client library.
+ *            NULL should be used for default configuration.
+ *            Configuration management functions will be added later.
+ *            Configuration will be able to specify e.g. size of cache used by library
+ *            for holding checks results.
+ * \param[in] callback Function called when connection is started.
+ *            If NULL, no callback will be called, when status changes.
+ * \param[in] user_status_data User specific data, passed to callback is being only remembered
+ *            by library. Cynara library does not take any actions on this pointer,
+ *            except for giving it back to user in cynara_status_callback.
+ *            Data should be valid at least until cynara_async_finish() is called.
+ *            Can be NULL.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return negative error code on error
+ */
+int cynara_async_initialize(cynara_async **pp_cynara, const cynara_async_configuration *p_conf,
+                            cynara_status_callback callback, void *user_status_data);
+
+/**
+ * \par Description:
+ * Release cynara-async-client library and destroy structure created with cynara_async_initialize().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara-async-client library.
+ *
+ * \par Typical use case:
+ * Once after connection to cynara is not needed.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structure and destroys cynara_async structure. Connection to
+ * cynara server is closed. Upon disconnecting this will trigger cynara_status_callback callback
+ * with -1 as new_fd param so client can unregister file descriptor connected with cynara. It will
+ * also trigger cynara_response_callback callback for each created request with
+ * cynara_async_call_cause::CYNARA_CALL_CAUSE_FINISH as cause param.
+ *
+ * \par Sync (or) Async:
+ * This is an asynchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * No other call to cynara-async-client library should be made after call to cynara_async_finish().
+ * cynara_async_finish() called from within cynara_response_callback or cynara_status_callback will
+ * be ignored.
+ *
+ * \param[in] p_cynara cynara_async structure. If NULL, then the call has no effect.
+ */
+void cynara_async_finish(cynara_async *p_cynara);
+
+/**
+ * \par Description:
+ * Check access to given privilege for specified user, client and client_session in cache.
+ *
+ * \par Purpose:
+ * This API should be used to check if cache holds information about access of user,
+ * running application identified as clients to a privilege.
+ * This API should be used for fast check in cache.
+ *
+ * \par Typical use case:
+ * A service wants to check in cache, if a client requesting access to some privilege
+ * has proper rights.
+ *
+ * \par Method of function operation:
+ * Client (a process / application) requesting access to a privilege is running as some user.
+ * For such triple (client, user, privilege) a cache is checked.
+ * If cache is invalid it is cleared and call returns same as access not found.
+ * Additional parameter client_session
+ * may be used to distinguish between client session (e.g. for allowing access only for this
+ * particular application launch). Empty string "" can be used, when session differentiation
+ * is not needed.
+ *
+ * \par Sync (or) Async:
+ * This is an synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * Call to cynara_async_check_cache() needs cynara_async structure to be created first.
+ * Use cynara_async_initialize() before calling this function. cynara_async_check_cache() called
+ * from within cynara_status_callback or cynara_response_callback with
+ * CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE or CYNARA_CALL_CAUSE_FINISH cause will return
+ * CYNARA_API_OPERATION_NOT_ALLOWED.
+ *
+ * Socket status may occasionally be changed to CYNARA_STATUS_FOR_RW, to ensure
+ * that cynara_async_process() is triggered in event loop after socket is ready to send
+ * monitor logs to Cynara service.
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara cynara_async structure.
+ * \param[in] client Application or process identifier.
+ * \param[in] client_session Client defined session.
+ * \param[in] user User of running client.
+ * \param[in] privilege Privilege that is a subject of a check.
+ *
+ * \return CYNARA_API_ACCESS_ALLOWED on checked access allowed
+ * \return CYNARA_API_ACCESS_DENIED on checked access denied
+ * \return CYNARA_API_CACHE_MISS on access not in cache
+ * \return other negative error code on error
+ */
+int cynara_async_check_cache(cynara_async *p_cynara, const char *client, const char *client_session,
+                             const char *user, const char *privilege);
+
+/**
+ * \par Description:
+ * Creates access check request to cynara service for client, user accessing given privilege.
+ * Set callback and user_response_data to be called and passed when request processing is finished.
+ *
+ * \par Purpose:
+ * This API should be used to create check request for client identified by a triple
+ * (client, user, privilege) in custom defined session.
+ * Response can be received with cynara_async_process().
+ * Check id is returned to pair request with response for canceling purposes.
+ *
+ * \par Typical use case:
+ * When cynara_async_check_cache() returned CYNARA_API_CACHE_MISS, so cynara service
+ * has to be asked, if a client requesting access to some privilege has proper rights.
+ * To receive matching response client sets callback and specifies arbitrary data to be passed
+ * to this callback.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Client (a process / application) requesting access to a privilege is running as some user.
+ * For such triple (client, user, privilege) a request event is created and added to pending
+ * requests for cynara_async_process() to process.
+ *
+ * Socket status will be changed to CYNARA_STATUS_FOR_RW, to ensure that cynara_async_process()
+ * will be triggered in event loop after socket is ready to send request to cynara service.
+ * After request is sent and there is nothing more to send to cynara service, status will change
+ * back to CYNARA_STATUS_FOR_READ. Status changes are delivered with cynara_status_callback.
+ * When function is successfully called unique check_id is returned. It is used for matching
+ * generated request with response, that will be received by registered callback.
+ *
+ * Because check_id is coded as 16-bit unsigned integer, there can be only 2^16 = 65536 pending
+ * requests. When response callback is called either because of getting answer or because
+ * of cancel check_id used for that request is released and can be reused by cynara library.
+ * When maximum of pending requests is reached cynara_async_create_request() fails with
+ * CYNARA_API_MAX_PENDING_REQUESTS error code.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is an asynchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * Call cynara_async_create_request() needs cynara_async structure to be created first with
+ * cynara_async_initialize().
+ * Call cynara_async_cancel_request() to cancel pending request.
+ * Call cynara_async_process() to receive response.
+ *
+ * It is guaranteed that if cynara_async_create_request() function succeeds (CYNARA_API_SUCCESS)
+ * a callback will be called exactly once and that it will receive user_response_data.
+ *
+ * If function fails (returns negative error code) request won't be generated and won't be pending,
+ * callback function won't be ever called and user_response_data won't be remembered by library.
+ *
+ * Also no check_id will be generated and *p_check_id value should be ignored.
+ * cynara_async_create_request() called from within cynara_status_callback or
+ * cynara_response_callback with CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE or CYNARA_CALL_CAUSE_FINISH
+ * cause will return CYNARA_API_OPERATION_NOT_ALLOWED.
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH ,otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara cynara_async structure.
+ * \param[in] client Application or process identifier.
+ * \param[in] client_session Client defined session.
+ * \param[in] user User of running client.
+ * \param[in] privilege Privilege that is a subject of a check.
+ * \param[out] p_check_id Placeholder for check id. If NULL, then no check_id is returned.
+ * \param[in] callback Function called when matching response is received.
+ *            If NULL then no callback will be called when response, cancel, finish
+ *            or service not availble error happens.
+ * \param[in] user_response_data User specific data, passed to callback is being only remembered
+ *            by library. Cynara library does not take any actions on this pointer,
+ *            except for giving it back to user in cynara_response_callback.
+ *            Can be NULL.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_MAX_PENDING_REQUESTS on too much pending requests
+ * \return other negative error code on error
+ */
+int cynara_async_create_request(cynara_async *p_cynara, const char *client,
+                                const char *client_session, const char *user, const char *privilege,
+                                cynara_check_id *p_check_id, cynara_response_callback callback,
+                                void *user_response_data);
+
+/**
+ * \par Description:
+ * Creates simple access check request to cynara service for (potential) permission to take some
+ * action or access a resource.
+ * Set callback and user_response_data to be called and passed when request processing is finished.
+ *
+ * \par Purpose:
+ * This API should be used for a quick check if a user running application identified as client
+ * has access to a given privilege.
+ * Response can be received with cynara_async_process().
+ * Check id is returned to pair request with response for canceling purposes.
+ *
+ * \par Typical use case:
+ * An application may use this API to check if it has (potential) permission to take some action
+ * or access resource in future (permissions may rarely change). The typical use would be to disable
+ * or hide some of functionalities if they probably could not be used anyways.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * This function is very similar to cynara_async_create_request() with the difference, that in case
+ * of answer not being one of CYNARA_API_PERMISSION_DENIED or CYNARA_API_PERMISSION_ALLOWED,
+ * no external application will be consulted. Instead, CYNARA_API_ACCESS_NOT_RESOLVED is returned
+ * by a callback, meaning, that only creating full request through cynara_async_create_request() API
+ * would yield eventual answer.
+ *
+ * If access permission cannot be acquired without usage of external agents, callback can be
+ * called with CYNARA_CALL_CAUSE_ANSWER and response value being CYNARA_API_ACCESS_NOT_RESOLVED.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * Call cynara_async_create_simple_request() needs cynara_async structure to be created first
+ * with cynara_async_initialize().
+ * Call cynara_async_cancel_request() to cancel pending request.
+ * Call cynara_async_process() to send request and receive response.
+ *
+ * The answer will be taken from cynara's database without consulting any external applications.
+ * If the answer cannot be resolved in one of CYNARA_API_ACCESS_ALLOWED or
+ * CYNARA_API_ACCESS_DENIED without communicating with external application, response returned
+ * through callback will have value CYNARA_API_ACCESS_NOT_RESOLVED.
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara cynara_async structure.
+ * \param[in] client Application or process identifier.
+ * \param[in] client_session Client defined session.
+ * \param[in] user User of running client.
+ * \param[in] privilege Privilege that is a subject of a check.
+ * \param[out] p_check_id Placeholder for check id. If NULL, then no check_id is returned.
+ * \param[in] callback Function called when matching response is received.
+ *            If NULL then no callback will be called when response, cancel, finish
+ *            or service not availble error happens.
+ * \param[in] user_response_data User specific data, passed to callback is being only stored by
+ *            library. Cynara library does not take any actions on this pointer, except for giving
+ *            it back to user in cynara_response_callback.
+ *            Can be NULL.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_MAX_PENDING_REQUESTS on too much pending requests
+ * \return other negative error code on error
+ */
+int cynara_async_create_simple_request(cynara_async *p_cynara, const char *client,
+                                       const char *client_session, const char *user,
+                                       const char *privilege, cynara_check_id *p_check_id,
+                                       cynara_response_callback callback, void *user_response_data);
+
+/**
+ * \par Description:
+ * Process events that appeared on cynara socket.
+ *
+ * \par Purpose:
+ * Process events after they appear on cynara socket.
+ *
+ * \par Typical use case:
+ * After request was queued with cynara_async_create_request() or
+ * cynara_async_create_simple_request() this API will return response.
+ * When event loop will return readiness on cynara socket, client should use this API.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * This API sends pending requests, receives all responses and reacts when cynara
+ * has disconnected. If cynara has disconnected all values in cache become invalid. During these
+ * operations status of cynara socket may change, so cynara_status_callback callback will be
+ * triggered to indicate these changes. cynara_response_callback callback will be triggered with
+ * cynara_async_call_cause::CYNARA_CALL_CAUSE_ANSWER as cause param when response is available.
+ *
+ * If cynara has disconnected it will be triggered with
+ * cynara_async_call_cause::CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE as cause param.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is an asynchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Call to cynara_async_process() requires initialized cynara_async structure. For this use
+ * cynara_async_initialize(). cynara_async_process() called from within cynara_status_callback or
+ * cynara_response_callback with CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE or CYNARA_CALL_CAUSE_FINISH
+ * cause will return CYNARA_API_OPERATION_NOT_ALLOWED.
+ *
+ * \param[in] p_cynara cynara_async structure.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return negative error code on error
+ */
+int cynara_async_process(cynara_async *p_cynara);
+
+/**
+ * \par Description:
+ * Cancel request created by cynara_async_create_request() or cynara_async_create_simple_request().
+ *
+ * \par Purpose:
+ * This API should be used to cancel pending check request,
+ * created by cynara_async_create_request() or cynara_async_create_simple_request().
+ *
+ * \par Typical use case:
+ * When cynara client is no longer interested in receiving an answer.
+ * Same check_id value should be used to identify proper request as was generated during
+ * request creation with cynara_async_create_request() or cynara_async_create_simple_request().
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Cancels request created by cynara_async_create_request() or cynara_async_create_simple_request()
+ * call.
+ *
+ * cynara_status_callback callback may be triggered to be able to send cancel to cynara.
+ * cynara_response_callback callback will be triggered with with
+ * cynara_async_call_cause::CYNARA_CALL_CAUSE_CANCEL as cause param.
+ *
+ * If given id is not valid (was not requested or response callback was already delivered)
+ * cynara_async_cancel_request() returns CYNARA_API_INVALID_PARAM.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Call to cynara_async_cancel_request() needs cynara_async structure to be created first. For this
+ * use cynara_async_initialize(). cynara_async_cancel_request() called from within
+ * cynara_status_callback or cynara_response_callback with CYNARA_CALL_CAUSE_SERVICE_NOT_AVAILABLE
+ * or CYNARA_CALL_CAUSE_FINISH cause will return CYNARA_API_OPERATION_NOT_ALLOWED.
+ *
+ * \param[in] p_cynara cynara_async structure.
+ * \param[in] check_id Check id to be cancelled
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return negative error code on error
+ */
+int cynara_async_cancel_request(cynara_async *p_cynara, cynara_check_id check_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CLIENT_ASYNC_H */
diff --git a/compat/include/cynara/cynara-client-plugin.h b/compat/include/cynara/cynara-client-plugin.h
new file mode 100644
index 0000000..70000e6
--- /dev/null
+++ b/compat/include/cynara/cynara-client-plugin.h
@@ -0,0 +1,75 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-client-plugin.h
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file defines cynara client side of external plugin interface -
+ *              ClientPluginInterface.
+ */
+
+#ifndef CYNARACLIENTPLUGIN_H_
+#define CYNARACLIENTPLUGIN_H_
+
+#include <memory>
+
+#include <plugin/ExternalPluginInterface.h>
+#include <types/ClientSession.h>
+#include <types/PolicyResult.h>
+
+namespace Cynara {
+
+class ClientPluginInterface;
+typedef std::shared_ptr<ClientPluginInterface> ClientPluginInterfacePtr;
+
+/**
+ * A class defining external plugins interface.
+ *
+ * These plugins work inside of cynara client library. They interpret
+ * PolicyResult returned by cynara in terms of:
+ * * cacheability - tells, whether value should be cached (for e.g. policyType like
+ *                  ALLOW_ONCE should not be cached)
+ * * usability - whether cache entry can still be used (for e.g. policy allowing access for
+ *               given type)
+ * * value - translates PolicyResult to CYNARA_API_ACCESS_ALLOWED or CYNARA_API_ACCESS_DENIED
+ *
+ * Plugin implementing ClientPluginInterface must implement ExternalPluginInterface.
+ * Creation/destruction functions with signatures compatible to Cynara::create_t and
+ * Cynara::destroy_t must be provided as factories of ClientPluginInterface.
+ */
+class ClientPluginInterface : public ExternalPluginInterface {
+public:
+    /**
+     * Return entry cacheability
+     */
+    virtual bool isCacheable(const ClientSession &session, const PolicyResult &result) = 0;
+    /**
+     * Return entry usability
+     */
+    virtual bool isUsable(const ClientSession &session, const ClientSession &prevSession,
+                          bool &updateSession, PolicyResult &result) = 0;
+    /**
+     * Translate PolicyResult to CYNARA_API_ACCESS_ALLOWED or CYNARA_API_ACCESS_DENIED
+     */
+    virtual int toResult(const ClientSession &session, PolicyResult &result) = 0;
+
+    virtual ~ClientPluginInterface() {};
+};
+
+}
+
+#endif // CYNARACLIENTPLUGIN_H_
diff --git a/compat/include/cynara/cynara-client.h b/compat/include/cynara/cynara-client.h
new file mode 100644
index 0000000..d1388ec
--- /dev/null
+++ b/compat/include/cynara/cynara-client.h
@@ -0,0 +1,305 @@
+/*
+ *  Copyright (c) 2014-2016 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-client.h
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains client APIs of Cynara available with libcynara-client.
+ * @example     cynara-client.example
+ */
+
+#ifndef CYNARA_CLIENT_H
+#define CYNARA_CLIENT_H
+
+#include <stddef.h>
+
+#include <cynara/cynara-error.h>
+#include <cynara/cynara-limits.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct cynara cynara;
+typedef struct cynara_configuration cynara_configuration;
+
+/**
+ * \par Description:
+ * Initialize cynara_configuration. Create structure used in following configuration
+ * API calls.
+ *
+ * \par Purpose:
+ * For configuration parameter to be used in cynara_initialize() function, this API must be
+ * called before any other cynara configuration API function.
+ * It will create cynara_configuration structure, an optional parameter of cynara initialization.
+ *
+ * \par Typical use case:
+ * Once before setting parameters of cynara configuration and passing to
+ * cynara_initialize().
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success returns pointer
+ * to created cynara_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This as a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_configuration created by cynara_configuration_create() call
+ * should be released with cynara_configuration_destroy().
+ * Structure cynara_configuration should be destroyed after passing it to
+ * cynara_initialize().
+ *
+ * \param[out] pp_conf Placeholder for created cynara_configuration structure.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ *         or negative error code on error.
+ */
+int cynara_configuration_create(cynara_configuration **pp_conf);
+
+/**
+ * \par Description:
+ * Release cynara_configuration structure created with cynara_configuration_create().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara_configuration.
+ *
+ * \par Typical use case:
+ * Once cynara_configuration is not needed.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structure and destroys cynara_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \param[in] p_conf cynara_configuration structure. If NULL, the call has no effect.
+ */
+void cynara_configuration_destroy(cynara_configuration *p_conf);
+
+/**
+ * \par Description:
+ * Set client cache size.
+ *
+ * \par Purpose:
+ * This API is used to change default number of cached responses returned from cynara.
+ *
+ * \par Typical use case:
+ * Once after cynara_configuration is created with cynara_configuration_create()
+ * and before passing configuration to cynara_initialize().
+ *
+ * \par Method of function operation:
+ * This API initializes cache with given capacity.
+ *
+ * \par Sync (or) Async:
+ * This as a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * After passing cynara_configuration to cynara_initialize() calling this API will have
+ * no effect.
+ *
+ * \param[in] p_conf cynara_configuration structure pointer.
+ * \param[in] cache_size Cache size to be set.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ *        or negative error code on error.
+ */
+int cynara_configuration_set_cache_size(cynara_configuration *p_conf, size_t cache_size);
+
+/**
+ * \par Description:
+ * Initialize cynara-client library with given configuration.
+ * Create structure used in following API calls.
+ *
+ * \par Purpose:
+ * This API must be used by prior calling cynara_check() function.
+ *
+ * \par Typical use case:
+ * Once before a service can call cynara_check().
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success
+ * creates and returns cynara structure.
+ *
+ * \par Sync (or) Async:
+ * This is a Synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara created by cynara_initialize() call should be released with cynara_finish().
+ *
+ * \param[out] pp_cynara Place holder for created cynara structure.
+ * \param[in] p_conf Configuration for cynara-client library. NULL for default parameters.
+ * [TODO define and describe functions for custom parameters].
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code on error.
+ */
+int cynara_initialize(cynara **pp_cynara, const cynara_configuration *p_conf);
+
+/**
+ * \par Description:
+ * Release cynara-client library and destroy structure created with cynara_initialize().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara-client library.
+ *
+ * \par Typical use case:
+ * Once after last call to cynara_check().
+ *
+ * \par Method of function operation:
+ * This API releases inner library structures and destroys cynara structure.
+ *
+ * \par Sync (or) Async:
+ * This is a Synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * No other call to libcynara-client should be made after call to cynara_finish().
+ *
+ * \param[in] p_cynara Cynara structure.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code on error.
+ */
+int cynara_finish(cynara *p_cynara);
+
+/**
+ * \par Description:
+ * Check client, user access for given privilege.
+ *
+ * \par Purpose:
+ * This API should be used to check if a user running application identified as client
+ * has access to a privilege.
+ *
+ * \par Typical use case:
+ * A service want to ask trusted process (Cynara), if a client demanding access to some privilege
+ * has proper rights.
+ *
+ * \par Method of function operation:
+ * Client (a process / application) demanding access to a privilege is running as some user.
+ * For such triple an access to a privilege is checked by calling cynara.
+ * Depending on defined policy, an external application may be launched to ask user a question,
+ * e.g. if [s]he wants to allow client to use a privilege. Additional parameter client_session
+ * may be used to distinguish between client session (e.g. for allowing access only for this
+ * particular application launch).
+ *
+ * \par Sync (or) Async:
+ * This is a Synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * An external application may be launched to allow user interaction in granting or denying access.
+ *
+ * Call to cynara_check() needs cynara structure to be created first with call to
+ * cynara_initialize().
+ *
+ * String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise CYNARA_API_INVALID_PARAM will be
+ * returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara Cynara structure.
+ * \param[in] client Application or process identifier.
+ * \param[in] client_session Session of client (connection, launch).
+ * \param[in] user User running client.
+ * \param[in] privilege Privilege that is a subject of a check..
+ *
+ * \return CYNARA_API_ACCESS_ALLOWED on access allowed, CYNARA_API_ACCESS_DENIED on access denial
+ * or other error code on error.
+ */
+int cynara_check(cynara *p_cynara, const char *client, const char *client_session, const char *user,
+                 const char *privilege);
+
+/**
+ * \par Description:
+ * Check for (potential) permission to take some action or access a resource.
+ *
+ * \par Purpose:
+ * This API should be used for a quick check if a user running application identified as client
+ * has access to a given privilege.
+ *
+ * \par Typical use case:
+ * An application may use this API to check, if it has (potential) permission to take some action
+ * or access resource in future (permissions may rarely change). The typical use would be to disable
+ * or hide some of functionalities, if they probably could not be used anyways.
+ *
+ * \par Method of function operation:
+ * This function is very similar to cynara_check() with the difference, that in case of answer not
+ * being one of CYNARA_API_ACCESS_DENIED or CYNARA_API_ACCESS_ALLOWED, no external application will
+ * be consulted. Instead, CYNARA_API_ACCESS_NOT_RESOLVED is returned, meaning, that only running
+ * full cynara_check() API would yield eventual answer.
+ * Similarly, like in cynara_check(), argument client_session can be used to distinguish client
+ * sessions and grant possibility to yield answer from cache.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * \parblock
+ * The answer will be taken from Cynara's database without consulting any external applications.
+ * If the answer cannot be resolved in one of CYNARA_API_PERMISSION_DENIED or
+ * CYNARA_API_PERMISSION_ALLOWED without communicating with external application the API will return
+ * CYNARA_API_ACCESS_NOT_RESOLVED.
+ *
+ * Call to cynara_simple_check() needs cynara structure to be created first with call to
+ * cynara_initialize(). String length cannot exceed CYNARA_MAX_ID_LENGTH, otherwise
+ * CYNARA_API_INVALID_PARAM will be returned.
+ * \endparblock
+ *
+ * \param[in] p_cynara Cynara structure.
+ * \param[in] client Application or process identifier.
+ * \param[in] client_session Session of client (connection, launch).
+ * \param[in] user User running client.
+ * \param[in] privilege Privilege that is a subject of a check.
+ *
+ * \return CYNARA_API_ACCESS_ALLOWED on access allowed, CYNARA_API_ACCESS_DENIED on access denial,
+ * CYNARA_API_ACCESS_NOT_RESOLVED when decision is not known without usage of external plugins or
+ * agents or negative error code on error.
+ */
+int cynara_simple_check(cynara *p_cynara, const char *client, const char *client_session,
+                        const char *user, const char *privilege);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CLIENT_H */
diff --git a/compat/include/cynara/cynara-creds-commons.h b/compat/include/cynara/cynara-creds-commons.h
new file mode 100644
index 0000000..81b9784
--- /dev/null
+++ b/compat/include/cynara/cynara-creds-commons.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-creds-commons.h
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Radoslaw Bartosiak <r.bartosiak@samsung.com>
+ * @author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains common APIs for Cynara credentials helper.
+ */
+
+#ifndef CYNARA_CREDS_COMMONS_H
+#define CYNARA_CREDS_COMMONS_H
+
+#include <cynara/cynara-error.h>
+
+enum cynara_client_creds {
+    CLIENT_METHOD_SMACK,
+    CLIENT_METHOD_PID,
+
+    CLIENT_METHOD_DEFAULT = 0xFFFF,
+};
+
+enum cynara_user_creds {
+    USER_METHOD_UID,
+    USER_METHOD_GID,
+
+    USER_METHOD_DEFAULT = 0xFFFF,
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Gets the system default method value for client feature used in cynara-creds.
+ *
+ * \par Purpose:
+ * Functions cynara_creds_dbus_get_client() and cynara_creds_socket_get_client() take a method
+ * parameter, which determines a kind of process feature (i.e PID, SMACK label) returned by them.
+ * The described function provides implementation for obtaining a system default value
+ * for this parameter.
+ *
+ * \par Typical use case:
+ * The function might be called before cynara_creds_dbus_get_client()
+ * and cynara_creds_socket_get_client(), when functions shall be invoked with system default
+ * value of method parameter.
+ *
+ * \par Method of function operation:
+ * When this function is called for the first time it reads and returns the value of client_default
+ * parameter from /etc/cynara/creds.conf file.
+ * Returned value is cached so subsequent calls will not consult file again but use cached value.
+ * This also means that after the initial call any changes in the file will be ignored for the
+ * remaining lifetime of the process.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is thread-safe.
+ *
+ * \param[out] method Placeholder for system default client feature
+ *                     (like CLIENT_METHOD_SMACK, CLIENT_METHOD_PID)
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY if there is error in memory allocation
+ * \return CYNARA_API_UNKNOWN_ERROR if there is other error
+ *
+ */
+int cynara_creds_get_default_client_method(enum cynara_client_creds *method);
+
+/**
+ * \par Description:
+ * Gets the system default method value for user feature used in cynara-creds.
+ *
+ * \par Purpose:
+ * Functions cynara_creds_dbus_get_user() and cynara_creds_socket_get_user() take a method
+ * parameter, which determines a kind of process feature (i.e UID, GID) returned by them.
+ * The described function provides implementation for obtaining a system default value
+ * for this parameter.
+ *
+ * \par Typical use case:
+ * The function might be called before cynara_creds_dbus_get_user()
+ * and cynara_creds_socket_get_user() when functions shall be invoked with system default
+ * value of method parameter.
+ *
+ * \par Method of function operation:
+ * When this function is called for the first time it reads and returns the value of user_default
+ * parameter from /etc/cynara/creds.conf file.
+ * Returned value is cached so subsequent calls will not consult file again but use cached value.
+ * This also means that after the initial call any changes in the file will be ignored for the
+ * remaining lifetime of the process.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is thread-safe.
+ *
+ * \param[out] method Placeholder for system default user feature
+ * (like USER_METHOD_UID, USER_METHOD_GID)
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY if there is error in memory allocation
+ * \return CYNARA_API_UNKNOWN_ERROR if there is other error
+ */
+int cynara_creds_get_default_user_method(enum cynara_user_creds *method);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CREDS_COMMONS_H */
diff --git a/compat/include/cynara/cynara-creds-dbus.h b/compat/include/cynara/cynara-creds-dbus.h
new file mode 100644
index 0000000..04af96f
--- /dev/null
+++ b/compat/include/cynara/cynara-creds-dbus.h
@@ -0,0 +1,171 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-creds-dbus.h
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Radoslaw Bartosiak <r.bartosiak@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains Cynara credentials helper APIs for dbus clients.
+ * @example     cynara-creds-dbus.example
+ */
+
+#ifndef CYNARA_CREDS_DBUS_H
+#define CYNARA_CREDS_DBUS_H
+
+#include <dbus/dbus.h>
+#include <sys/types.h>
+
+#include <cynara/cynara-creds-commons.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Creates a client identification string with given method. Client is a process identified by the
+ * unique name at the other side of the dbus connection.
+ *
+ * \par Purpose:
+ * Client identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as client parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates client string by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus").
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned client string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is CLIENT_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client
+ * \param[in] method Method of client identifier creation
+ * \param[out] client Placeholder for allocated string containing client id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when client is NULL or uniqueName or client has wrong
+ *                                  value (i.e NULL or non-existing)
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_dbus_get_client(DBusConnection *connection, const char *uniqueName,
+                                 enum cynara_client_creds method, char **client);
+
+/**
+ * \par Description:
+ * Creates a user identification string with given method. User is an executor of process
+ * at the other side of socket.
+ *
+ * \par Purpose:
+ * User identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as user parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates user string by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus").
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned user string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is USER_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client invoked by the user
+ * \param[in] method Method of client identifier creation
+ * \param[out] user Placeholder for allocated string containing user id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when user is NULL or connection is not valid DBus connection or
+ *                                  uniqueName does not represent a process conected to the DBus
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_dbus_get_user(DBusConnection *connection, const char *uniqueName,
+                               enum cynara_user_creds method, char **user);
+
+/**
+ * \par Description:
+ * Return PID of a proces identified by the unique name at the other side of the dbus connection.
+ *
+ * \par Purpose:
+ * PID may be used for client_session creation with cynara_helper_session_from_pid() function
+ * from libcynara-helper-session library. Client_session is needed for cynara_check()
+ * and cynara_async_create_request() functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_helper_session_from_pid() function.
+ *
+ * \par Method of function operation:
+ * The function reads PID of the peer by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus")
+ * with "GetConnectionUnixProcessID" argument.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client invoked by the user
+ * \param[out] pid Placeholder for PID returned by function
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when socket_fd is not valid connected socket descriptor
+ * \return CYNARA_API_UNKNOWN_ERROR when system function fails in incredible situation
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_dbus_get_pid(DBusConnection *connection, const char *uniqueName, pid_t *pid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CREDS_DBUS_H */
diff --git a/compat/include/cynara/cynara-creds-gdbus.h b/compat/include/cynara/cynara-creds-gdbus.h
new file mode 100644
index 0000000..2334e45
--- /dev/null
+++ b/compat/include/cynara/cynara-creds-gdbus.h
@@ -0,0 +1,167 @@
+/*
+ *  Copyright (c) 2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-creds-gdbus.h
+ * @author      Jacek Bukarewicz <j.bukarewicz@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains Cynara credentials helper APIs for gdbus clients.
+ * @example     cynara-creds-gdbus.example
+ */
+
+#ifndef CYNARA_CREDS_GDBUS_H
+#define CYNARA_CREDS_GDBUS_H
+
+#include <gio/gio.h>
+#include <sys/types.h>
+
+#include <cynara/cynara-creds-commons.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Creates a client identification string with given method. Client is a process identified by the
+ * unique name at the other side of the dbus connection.
+ *
+ * \par Purpose:
+ * Client identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as client parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with g_free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates client string by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus").
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned user string should be freed with g_free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is CLIENT_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client
+ * \param[in] method Method of client identifier creation
+ * \param[out] client Placeholder for allocated string containing client id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when client is NULL or uniqueName or client has wrong
+ *                                  value (i.e NULL or non-existing)
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ */
+int cynara_creds_gdbus_get_client(GDBusConnection *connection, const gchar *uniqueName,
+                                  enum cynara_client_creds method, gchar **client);
+
+/**
+ * \par Description:
+ * Creates a user identification string with given method. User is an executor of process
+ * at the other side of socket.
+ *
+ * \par Purpose:
+ * User identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as user parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with g_free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates user string by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus").
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned user string should be freed with g_free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is USER_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client invoked by the user
+ * \param[in] method Method of client identifier creation
+ * \param[out] user Placeholder for allocated string containing user id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when user is NULL or connection is not valid DBus connection or
+ *                                  uniqueName does not represent a process conected to the DBus
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ */
+int cynara_creds_gdbus_get_user(GDBusConnection *connection, const gchar *uniqueName,
+                                enum cynara_user_creds method, gchar **user);
+
+/**
+ * \par Description:
+ * Return PID of a process identified by the unique name at the other side of the dbus connection.
+ *
+ * \par Purpose:
+ * PID may be used for client_session creation with cynara_helper_session_from_pid() function
+ * from libcynara-helper-session library. Client_session is needed for cynara_check()
+ * and cynara_async_create_request() functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_helper_session_from_pid() function.
+ *
+ * \par Method of function operation:
+ * The function reads PID of the peer by calling a method from DBus Interface
+ * ("org.freedesktop.DBus") which is placed on system bus ("org.freedesktop.DBus")
+ * with "GetConnectionUnixProcessID" argument.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \param[in] connection DBus connection to a bus. It manages incomming and outgoing messages
+ * \param[in] uniqueName DBus identifier of the client invoked by the user
+ * \param[out] pid Placeholder for PID returned by function
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when one of parameters is not valid
+ * \return CYNARA_API_UNKNOWN_ERROR when function fails because of unknown error
+ */
+int cynara_creds_gdbus_get_pid(GDBusConnection *connection, const gchar *uniqueName, pid_t *pid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CREDS_GDBUS_H */
diff --git a/compat/include/cynara/cynara-creds-self.h b/compat/include/cynara/cynara-creds-self.h
new file mode 100644
index 0000000..580a19d
--- /dev/null
+++ b/compat/include/cynara/cynara-creds-self.h
@@ -0,0 +1,121 @@
+/*
+ *  Copyright (c) 2016 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-creds-self.h
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @version     1.0
+ * @brief       This file contains Cynara credentials helper APIs for current process
+ * @example     cynara-creds-self.example
+ */
+
+#ifndef CYNARA_CREDS_SELF_H
+#define CYNARA_CREDS_SELF_H
+
+#include <sys/types.h>
+
+#include <cynara/cynara-creds-commons.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Creates a client identification string with given method. Client is a current process.
+ *
+ * \par Purpose:
+ * Client identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as client parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates client string using current process context.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned client string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is CLIENT_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] method Method of client identifier creation
+ * \param[out] client Placeholder for allocated string containing client id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when client is NULL
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_self_get_client(enum cynara_client_creds method, char **client);
+
+/**
+ * \par Description:
+ * Creates a user identification string with given method. User is current process.
+ *
+ * \par Purpose:
+ * User identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as user parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates user string using current process context.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned user string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is USER_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] method Method of user identifier creation
+ * \param[out] user Placeholder for allocated string containing user id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when user is NULL
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_self_get_user(enum cynara_user_creds method, char **user);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CREDS_SELF_H */
diff --git a/compat/include/cynara/cynara-creds-socket.h b/compat/include/cynara/cynara-creds-socket.h
new file mode 100644
index 0000000..fe5cbdb
--- /dev/null
+++ b/compat/include/cynara/cynara-creds-socket.h
@@ -0,0 +1,161 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-creds-socket.h
+ * @author      Radoslaw Bartosiak <r.bartosiak@samsung.com>
+ * @author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains Cynara credentials helper APIs for socket clients.
+ * @example     cynara-creds-socket.example
+ */
+
+#ifndef CYNARA_CREDS_SOCKET_H
+#define CYNARA_CREDS_SOCKET_H
+
+#include <sys/types.h>
+
+#include <cynara/cynara-creds-commons.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Creates a client identification string with given method. Client is a process at the other
+ * side of socket.
+ *
+ * \par Purpose:
+ * Client identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as client parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates client string using SO_PEERCRED on socket.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned client string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is CLIENT_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] socket_fd Descriptor of open connected UNIX socket
+ * \param[in] method Method of client identifier creation
+ * \param[out] client Placeholder for allocated string containing client id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when client is NULL or socket_fd is not valid connected socket
+ *                                  descriptor
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_socket_get_client(int socket_fd, enum cynara_client_creds method, char **client);
+
+/**
+ * \par Description:
+ * Creates a user identification string with given method. User is an executor of process
+ * at the other side of socket.
+ *
+ * \par Purpose:
+ * User identification string is required for cynara_check() and cynara_async_create_request()
+ * functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as user parameter in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function when it is no
+ * longer needed.
+ *
+ * \par Method of function operation:
+ * The function generates user string using SO_PEERCRED on socket.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \par Important notes:
+ * Memory for returned user string is obtained with malloc(), and should be freed with free().
+ * Allocated string is returned only, when function succeeds.
+ * If method is USER_METHOD_DEFAULT then it will be chosen based on Cynara configuration file.
+ *
+ * \param[in] socket_fd Descriptor of open connected UNIX socket
+ * \param[in] method Method of user identifier creation
+ * \param[out] user Placeholder for allocated string containing user id
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when user is NULL or socket_fd is not valid connected socket
+ *                                  descriptor
+ * \return CYNARA_API_METHOD_NOT_SUPPORTED when requested method is not supported
+ * \return CYNARA_API_CONFIGURATION_ERROR if the configuration file can not be opened or
+ *                                        there are errors in configuration file
+ * \return CYNARA_API_OUT_OF_MEMORY when there was error allocating memory
+ */
+int cynara_creds_socket_get_user(int socket_fd, enum cynara_user_creds method, char **user);
+
+/**
+ * \par Description:
+ * Return PID of process at the other side of socket.
+ *
+ * \par Purpose:
+ * PID may be used for client_session creation with cynara_session_from_pid() function
+ * from libcynara-session library. Client_session is needed for cynara_check()
+ * and cynara_async_create_request() functions.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_session_from_pid() function.
+ *
+ * \par Method of function operation:
+ * The function reads PID of peer using SO_PEERCRED on socket.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is NOT thread-safe. If functions from described API are called by multithreaded
+ * application from different threads, they must be put into mutex protected critical section.
+ *
+ * \param[in] socket_fd Descriptor of open connected UNIX socket
+ * \param[out] pid Placeholder for pid
+ *
+ * \return CYNARA_API_SUCCESS on success
+ * \return CYNARA_API_INVALID_PARAM when socket_fd is not valid connected socket descriptor
+ * \return CYNARA_API_UNKNOWN_ERROR when system function fails in incredible situation
+ */
+int cynara_creds_socket_get_pid(int socket_fd, pid_t *pid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_CREDS_SOCKET_H */
diff --git a/compat/include/cynara/cynara-error.h b/compat/include/cynara/cynara-error.h
new file mode 100644
index 0000000..8316f1d
--- /dev/null
+++ b/compat/include/cynara/cynara-error.h
@@ -0,0 +1,148 @@
+/*
+ *  Copyright (c) 2014-2017 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-error.h
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @author      Radoslaw Bartosiak <r.bartosiak@samsung.com>
+ * @author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * @version     1.0
+ * @brief       This file contains error codes returned by APIs of Cynara.
+ */
+
+#ifndef CYNARA_ERROR_H
+#define CYNARA_ERROR_H
+
+#include <stddef.h>
+
+/**
+ * \name Return Codes
+ * Exported by the foundation API. Return codes beginning with negative codes indicate an error.
+ * @{
+*/
+
+/*! \brief  indicating that API call was interrupted by user*/
+#define CYNARA_API_INTERRUPTED                  4
+
+/*! \brief  indicating access that cannot be resolved without further actions*/
+#define CYNARA_API_ACCESS_NOT_RESOLVED          3
+
+/*! \brief   indicating access that was checked is allowed */
+#define CYNARA_API_ACCESS_ALLOWED               2
+
+/*! \brief   indicating that access that was checked is denied */
+#define CYNARA_API_ACCESS_DENIED                1
+
+/*! \brief   indicating the result of the one specific API is successful */
+#define CYNARA_API_SUCCESS                      0
+
+/*! \brief   indicating that value is not present in cache */
+#define CYNARA_API_CACHE_MISS                   -1
+
+/*! \brief   indicating that pending requests reached maximum */
+#define CYNARA_API_MAX_PENDING_REQUESTS         -2
+
+/*! \brief   indicating system is running out of memory state */
+#define CYNARA_API_OUT_OF_MEMORY                -3
+
+/*! \brief   indicating the API's parameter is malformed */
+#define CYNARA_API_INVALID_PARAM                -4
+
+/*! \brief   indicating that service is not available */
+#define CYNARA_API_SERVICE_NOT_AVAILABLE        -5
+
+/*! \brief   indicating that provided method is not supported by library */
+#define CYNARA_API_METHOD_NOT_SUPPORTED         -6
+
+/*! \brief   cynara service does not allow to perform requested operation */
+#define CYNARA_API_OPERATION_NOT_ALLOWED        -7
+
+/*! \brief   cynara service failed to perform requested operation */
+#define CYNARA_API_OPERATION_FAILED             -8
+
+/*! \brief   cynara service hasn't found requested bucket */
+#define CYNARA_API_BUCKET_NOT_FOUND             -9
+
+/*! \brief   indicating an unknown error */
+#define CYNARA_API_UNKNOWN_ERROR                -10
+
+/*! \brief   indicating configuration error */
+#define CYNARA_API_CONFIGURATION_ERROR          -11
+
+/*! \brief   indicating invalid parameter in command-line */
+#define CYNARA_API_INVALID_COMMANDLINE_PARAM    -12
+
+/*! \brief   indicating that provided buffer is too short */
+#define CYNARA_API_BUFFER_TOO_SHORT             -13
+
+/*! \brief   indicating that database is corrupted */
+#define CYNARA_API_DATABASE_CORRUPTED           -14
+
+/*! \brief   indicating that user doesn't have enough permission to perform action */
+#define CYNARA_API_PERMISSION_DENIED            -15
+/** @}*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Returns the error string in the user-supplied buffer buf of length buflen.
+ *
+ * \par Purpose:
+ * This function populates passed argument buf with a string that describes the error code
+ * passed in the argument errnum, possibly using the LC_MESSAGES part of the current locale
+ * to select the appropriate language.
+ *
+ * \par Typical use case:
+ * Once after any of API functions returns negative value (if the error message is to be presented
+ * to the user).
+ *
+ * \par Method of function operation:
+ * This function copies error string to memory pointed by argument buf along with termination
+ * character ('\0').
+ *
+ * \par Sync (or) async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is thread-safe as long as setlocale() is not invoked concurrently.
+ *
+ * \par Important notes:
+ * This function copies error string to memory pointed by argument buf only if the buffer is
+ * of sufficient size (indicated by argument buflen). User is responsible for allocating sufficient
+ * memory for both error string and termination character ('\0').
+ * Moreover, the user must not invoke setlocale() concurrently with this function, because results
+ * are unspecified.
+ *
+ * \param[in] errnum error number
+ * \param[out] buf buffer for error message
+ * \param[in] buflen buffer size
+ *
+ * \return CYNARA_API_SUCCESS on success, CYNARA_API_BUFFER_TOO_SHORT, if error message couldn't fit
+ *         into allocated buffer, or CYNARA_API_INVALID_PARAM if errnum is not a valid error number
+ *         or argument buf is NULL.
+ *
+ * \brief Obtain error message from error number.
+ */
+int cynara_strerror(int errnum, char *buf, size_t buflen);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_ERROR_H */
diff --git a/compat/include/cynara/cynara-limits.h b/compat/include/cynara/cynara-limits.h
new file mode 100644
index 0000000..f4e98c1
--- /dev/null
+++ b/compat/include/cynara/cynara-limits.h
@@ -0,0 +1,35 @@
+/*
+ *  Copyright (c) 2015-2016 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-limits.h
+ * @author      Rafal Krypa <r.krypa@samsung.com>
+ * @version     1.0
+ * @brief       This file contains limits for parameter sizes of Cynara APIs.
+ */
+
+#ifndef CYNARA_LIMITS_H
+#define CYNARA_LIMITS_H
+
+/*! \brief Maximum length of text identifier accepted by Cynara */
+#define CYNARA_MAX_ID_LENGTH                    4096
+
+/*! \brief Maximum size of vector accepted by Cynara */
+#define CYNARA_MAX_VECTOR_SIZE                  4096
+
+/*! \brief Maximum size of monitor entries buffer accepted by Cynara */
+#define CYNARA_MAX_MONITOR_BUFFER_SIZE          65535
+
+#endif /* CYNARA_LIMITS_H */
diff --git a/compat/include/cynara/cynara-monitor.h b/compat/include/cynara/cynara-monitor.h
new file mode 100644
index 0000000..ce7b8d0
--- /dev/null
+++ b/compat/include/cynara/cynara-monitor.h
@@ -0,0 +1,421 @@
+/*
+ *  Copyright (c) 2016 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-monitor.h
+ * @author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * @version     1.0
+ * @brief       This file contains client APIs of Cynara monitoring.
+ */
+
+#ifndef CYNARA_MONITOR_H
+#define CYNARA_MONITOR_H
+
+#include <stddef.h>
+#include <time.h>
+
+#include <cynara/cynara-error.h>
+#include <cynara/cynara-limits.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct cynara_monitor_configuration cynara_monitor_configuration;
+typedef struct cynara_monitor cynara_monitor;
+typedef struct cynara_monitor_entry cynara_monitor_entry;
+
+/**
+ * \par Description:
+ * Initializes cynara_monitor_configuration. Creates structure used in following configuration
+ * API calls.
+ *
+ * \par Purpose:
+ * For configuration parameter to be used in cynara_monitor_initialize() function, this API must be
+ * called before any other Cynara monitor configuration API function.
+ * It will create cynara_monitor_configuration structure, an optional parameter
+ * of Cynara monitor initialization.
+ *
+ * \par Typical use case:
+ * Once before setting parameters of Cynara monitor configuration and passing to
+ * cynara_monitor_initialize().
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success returns pointer
+ * to created cynara_monitor_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * \parblock
+ * This function is NOT thread-safe. If this function is called simultaneously with other functions
+ * from described API in different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_monitor_configuration created by cynara_monitor_configuration_create() call
+ * should be released with cynara_monitor_configuration_destroy().
+ * Structure cynara_monitor_configuration should be destroyed after passing it to
+ * cynara_monitor_initialize().
+ * \endparblock
+ *
+ * \param[out] pp_conf Placeholder for created cynara_monitor_configuration structure.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ *         or negative error code on error.
+ */
+int cynara_monitor_configuration_create(cynara_monitor_configuration **pp_conf);
+
+/**
+ * \par Description:
+ * Releases cynara_monitor_configuration structure created
+ * with cynara_monitor_configuration_create().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after usage of cynara_monitor_configuration.
+ *
+ * \par Typical use case:
+ * Once cynara_monitor_configuration is not needed.
+ *
+ * \par Method of function operation:
+ * This API releases inner library structure and destroys cynara_monitor_configuration structure.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If this function is called simultaneously with other functions
+ * from described API in different threads, they must be put into protected critical section.
+ *
+ * \param[in] p_conf cynara_monitor_configuration structure. If NULL, the call has no effect.
+ */
+void cynara_monitor_configuration_destroy(cynara_monitor_configuration *p_conf);
+
+/**
+ * \par Description:
+ * Set monitor entries buffer size.
+ *
+ * \par Purpose:
+ * This API is used to change default number of monitor entries stored on server side
+ * before returning them to client of libcynara-monitor. Buffer size cannot exceed value
+ * of CYNARA_MAX_MONITOR_BUFFER_SIZE, otherwise CYNARA_API_INPUT_PARAM will be returned.
+ *
+ * \par Typical use case:
+ * Once after cynara_configuration is created with cynara_monitor_configuration_create()
+ * and before passing configuration to cynara_monitor_configuration().
+ *
+ * \par Method of function operation:
+ * This API initializes buffer with given capacity.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safety:
+ * This function is NOT thread-safe. If this function is called simultaneously with other functions
+ * from described API in different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * After passing cynara_configuration to cynara_monitor_initialize() calling this API will have
+ * no effect.
+ *
+ * If buffer size is not set with cynara_monitor_configuration_set_buffer_size(),
+ * a default size will be taken.
+ * \endparblock
+ *
+ * \param[in] p_conf cynara_monitor_configuration structure pointer.
+ * \param[in] buffer_size buffer size to be set.
+ *
+ * \return CYNARA_API_SUCCESS on success
+ *        or negative error code on error.
+ */
+int cynara_monitor_configuration_set_buffer_size(cynara_monitor_configuration *p_conf,
+                                                 size_t buffer_size);
+
+/**
+ * \par Description:
+ * Initializes cynara-monitor library with given configuration.
+ * Creates structure used in following API calls.
+ *
+ * \par Purpose:
+ * This API must be used by prior calling cynara_monitor_entries_get() function.
+ *
+ * \par Typical use case:
+ * Once before a service can call cynara_monitor_entries_get().
+ *
+ * \par Method of function operation:
+ * This API initializes inner library structures and in case of success
+ * creates cynara_monitor structure.
+ *
+ * \par Sync (or) Async:
+ * This is a Synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is NOT thread-safe. If this function is called simultaneously with other functions
+ * from described API in different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * Structure cynara_monitor created by cynara_monitor_initialize() call should be released
+ * with cynara_monitor_finish().
+ *
+ * \param[out] pp_cynara_monitor Placeholder for created cynara_monitor structure.
+ * \param[in] p_conf Configuration for cynara-monitor library. NULL for default parameters.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code on error.
+ */
+int cynara_monitor_initialize(cynara_monitor **pp_cynara_monitor,
+                              const cynara_monitor_configuration *p_conf);
+
+/**
+ * \par Description:
+ * Releases cynara-monitor library and destroys structure created with cynara_monitor_initialize().
+ *
+ * \par Purpose:
+ * This API should be used to clean up after the usage of cynara-monitor library.
+ *
+ * \par Typical use case:
+ * Once after last call to cynara_monitor_entries_get().
+ *
+ * \par Method of function operation:
+ * This API releases inner library structures and destroys cynara_monitor structure.
+ *
+ * \par Sync (or) Async:
+ * This is a Synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is NOT thread-safe. If this function is called simultaneously with other functions
+ * from described API in different threads, they must be put into protected critical section.
+ *
+ * \par Important notes:
+ * No other call to libcynara-monitor should be made after call to cynara_monitor_finish().
+ * This function cannot be called, if cynara_monitor_entries_get() haven't returned yet.
+ *
+ * \param[in] p_cynara_monitor Cynara monitor structure.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code on error.
+ */
+int cynara_monitor_finish(cynara_monitor *p_cynara_monitor);
+
+/**
+ * \brief Returns monitor entries.
+ *
+ * \par Description:
+ *
+ * Returns all available monitor entries right after the size of buffer reaches set limit.
+ *
+ * \par Purpose:
+ * This API should be used to get available monitor entries.
+ *
+ * \par Typical use case:
+ * Gathering information about possible accesses checked in Cynara by individual services.
+ *
+ * \par Method of function operation:
+ * \parblock
+ * Each call to cynara_check() made by individual services are logged. The logs can be obtained
+ * by privileged clients with usage of libcynara-monitor (this API).
+ *
+ * In case of successful call CYNARA_API_SUCCESS is returned and *monitor_entries points
+ * to newly created array of pointers to cynara_monitor_entry. It is responsibility
+ * of the caller to release entries with cynara_monitor_entries_free().
+ *
+ * The function blocks until the size of buffer reaches set limit or cynara_monitor_entries_flush()
+ * is called from another thread.
+ * \endparblock
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * Although this function is thread-safe, no multiple calls are allowed.
+ *
+ * \param[in] p_cynara_monitor cynara_monitor structure.
+ * \param[out] monitor_entries placeholder for NULL terminated array of pointers to
+ *             monitor_entries structures.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_monitor_entries_get(cynara_monitor *p_cynara_monitor,
+                               cynara_monitor_entry ***monitor_entries);
+
+/**
+ * \brief Makes cynara_monitor_entries_get() return immediately.
+ *
+ * \par Description:
+ *
+ * When called from another thread, makes cynara_monitor_entries_get() return immediately.
+ *
+ * \par Purpose:
+ * This API should be used to make cynara_monitor_entries_get() return immediately.
+ *
+ * \par Typical use case:
+ * User of libcynara-monitor wants to immediately get get monitor entries and/or make
+ * cynara_monitor_entries_get() return without waiting for full batch of entries.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \param[in] p_cynara_monitor cynara_monitor structure.
+ *
+ * \return CYNARA_API_SUCCESS on success, or error code otherwise.
+ */
+int cynara_monitor_entries_flush(cynara_monitor *p_cynara_monitor);
+
+/**
+ * \brief Releases monitor entries.
+ *
+ * \par Description:
+ *
+ * Releases monitor entries obtained with cynara_monitor_entries_get().
+ *
+ * \par Purpose:
+ * This API should be used to release array of cynara_monitor_entry obtained
+ * with cynara_monitor_entries_get.
+ *
+ * \par Typical use case:
+ * When user obtained all needed data from the entries and won't be accessing the
+ * memory any more.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \param[in] monitor_entries NULL terminated array of cynara_monitor_entry to be released.
+ */
+void cynara_monitor_entries_free(cynara_monitor_entry **monitor_entries);
+
+/**
+ * \brief Gets client from monitor_entry
+ *
+ * \par Description:
+ * Gives access to client field of monitor_entry given as a parameter.
+ * Please refer to cynara_check() in cynara-client.h for more information on client field.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * The returned pointer is valid as long as given monitor_entry is.
+ *
+ * \param[in] monitor_entry cynara_monitor_entry to be accessed.
+ *
+ * \return valid const char * pointer or NULL in case of error.
+ */
+const char *cynara_monitor_entry_get_client(const cynara_monitor_entry *monitor_entry);
+
+/**
+ * \brief Gets user from monitor_entry
+ *
+ * \par Description:
+ * Gives access to user field of monitor_entry given as a parameter.
+ * Please refer to cynara_check() in cynara-client.h for more information on user field.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * The returned pointer is valid as long as given monitor_entry is.
+ *
+ * \param[in] monitor_entry cynara_monitor_entry to be accessed.
+ *
+ * \return valid const char * pointer or NULL in case of error.
+ */
+const char *cynara_monitor_entry_get_user(const cynara_monitor_entry *monitor_entry);
+
+/**
+ * \brief Gets privilege from monitor_entry
+ *
+ * \par Description:
+ * Gives access to privilege field of monitor_entry given as a parameter.
+ * Please refer to cynara_check() in cynara-client.h for more information on privilege field.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * The returned pointer is valid as long as given monitor_entry is.
+ *
+ * \param[in] monitor_entry cynara_monitor_entry to be accessed.
+ *
+ * \return valid const char * pointer or NULL in case of error.
+ */
+const char *cynara_monitor_entry_get_privilege(const cynara_monitor_entry *monitor_entry);
+
+/**
+ * \brief Gets result from monitor_entry
+ *
+ * \par Description:
+ * Gives access to result field of monitor_entry given as a parameter.
+ * In case of successful get, the result is one of CYNARA_API_ACCESS_ALLOWED
+ * or CYNARA_API_ACCESS_DENIED. In case of error a negative code error is returned.
+ * Please refer to cynara-error.h for more information.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \param[in] monitor_entry cynara_monitor_entry to be accessed.
+ *
+ * \return CYNARA_API_ACCESS_ALLOWED on access allowed, CYNARA_API_ACCESS_DENIED on access denial
+ * or other error code on error.
+ */
+int cynara_monitor_entry_get_result(const cynara_monitor_entry *monitor_entry);
+
+/**
+ * \brief Gets timestamp from monitor_entry
+ *
+ * \par Description:
+ * Gives access to timestamp field of monitor_entry given as a parameter.
+ * This is the time of cynara_check() being invoked. Please refer to cynara-client.h
+ * for more information about cynara_check().
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread-safeness:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * The returned pointer is valid as long as given monitor_entry is.
+ *
+ * \param[in] monitor_entry cynara_monitor_entry to be accessed.
+ *
+ * \return valid const istruct timspec * pointer or NULL in case of error.
+ */
+const struct timespec *cynara_monitor_entry_get_timestamp(
+        const cynara_monitor_entry *monitor_entry);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_MONITOR_H */
diff --git a/compat/include/cynara/cynara-plugin.h b/compat/include/cynara/cynara-plugin.h
new file mode 100644
index 0000000..747966f
--- /dev/null
+++ b/compat/include/cynara/cynara-plugin.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+/**
+ * @file        src/include/cynara-plugin.h
+ * @author      Zofia Abramowska <z.abramowska@samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file defines cynara service side  of external plugin interface -
+ *              ServicePluginInterface
+ */
+
+#ifndef CYNARA_PLUGIN_H_
+#define CYNARA_PLUGIN_H_
+
+#include <memory>
+#include <string>
+#include <vector>
+
+#include <log/log.h>
+#include <plugin/ExternalPluginInterface.h>
+#include <types/PolicyResult.h>
+#include <types/PolicyType.h>
+
+namespace Cynara {
+
+//These typedefs will be defined in external headers
+typedef std::string PluginData;
+typedef std::string AgentType;
+
+class ServicePluginInterface;
+typedef std::shared_ptr<ServicePluginInterface> ServicePluginInterfacePtr;
+
+/**
+ * A class defining external plugins interface.
+ * These plugins work inside of cynara and either can produce
+ * response through check instantly or require communication
+ * with given type of agent. Agent must be registered through
+ * cynara-agent API.
+ *
+ * Plugin implementing ServicePluginInterface must implement ExternalPluginInterface.
+ * Creation/destruction functions with signatures compatible to Cynara::create_t and
+ * Cynara::destroy_t must be provided as factories of ServicePluginInterface.
+ */
+
+class ServicePluginInterface : public ExternalPluginInterface {
+public:
+    /**
+     * Enum indicating status of calling plugin method.
+     */
+    enum class PluginStatus {
+        SUCCESS,                /**<  update() finished successfully */
+        ANSWER_READY,           /**<  check() returns answer immediately through argument */
+        ANSWER_NOTREADY,        /**<  check() cannot return answer immediately,
+                                      communication with agent is required */
+        ERROR                   /**<  either check() or update() fails */
+    };
+
+    /**
+     * Asks plugin, what kind of permission does client, user and privilege has.
+     *
+     * @param[in] client
+     * @param[in] user
+     * @param[in] privilege
+     * @param[out] result        Immediate response (if available)
+     * @param[out] requiredAgent When ANSWER_NOTREADY, required AgentType to communicate with
+     * @param[out] pluginData    Additional data, that will be passed to agent
+     * @return PluginStatus      In case of success - either ANSWER_READY or ANSWER_NOTREADY,
+     *                           in case of error - ERROR
+     */
+    virtual PluginStatus check(const std::string &client, const std::string &user,
+                               const std::string &privilege, PolicyResult &result,
+                               AgentType &requiredAgent, PluginData &pluginData) noexcept = 0;
+
+    /**
+     * Updates response returned by agent
+     * @param[in] client
+     * @param[in] user
+     * @param[in] privilege
+     * @param[in] agentData   Additional data, passed from agent
+     * @param[out] result     Response interpreted from agent
+     * @return PluginStatus   In case of success - SUCCESS, in case of error - ERROR
+     */
+    virtual PluginStatus update(const std::string &client, const std::string &user,
+                                const std::string &privilege, const PluginData &agentData,
+                                PolicyResult &result) noexcept = 0;
+
+    virtual ~ServicePluginInterface() {};
+
+};
+
+} // namespace Cynara
+
+#endif /* CYNARA_PLUGIN_H_ */
diff --git a/compat/include/cynara/cynara-policy-types.h b/compat/include/cynara/cynara-policy-types.h
new file mode 100644
index 0000000..bd74b5a
--- /dev/null
+++ b/compat/include/cynara/cynara-policy-types.h
@@ -0,0 +1,48 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * \file        src/include/cynara-policy-types.h
+ * \author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * \version     1.0
+ * \brief       This file contains policy types / operations definitions.
+ */
+
+#ifndef CYNARA_POLICY_TYPES_H
+#define CYNARA_POLICY_TYPES_H
+
+/**
+ * \name Operation Codes
+ * Operation codes that define action type to be taken
+ * @{
+ */
+
+/*! \brief   a policy or bucket should be removed */
+#define CYNARA_ADMIN_DELETE -1
+
+/*! \brief   set policy result or bucket's default policy to DENY */
+#define CYNARA_ADMIN_DENY 0
+
+/*! \brief   set bucket's default policy to NONE */
+#define CYNARA_ADMIN_NONE 1
+
+/*! \brief   set policy to point into another bucket */
+#define CYNARA_ADMIN_BUCKET 0xFFFE
+
+/*! \brief   set policy result or bucket's default policy to ALLOW */
+#define CYNARA_ADMIN_ALLOW 0xFFFF
+/** @}*/
+
+#endif /* CYNARA_POLICY_TYPES_H */
diff --git a/compat/include/cynara/cynara-session.h b/compat/include/cynara/cynara-session.h
new file mode 100644
index 0000000..1c76bce
--- /dev/null
+++ b/compat/include/cynara/cynara-session.h
@@ -0,0 +1,73 @@
+/*
+ *  Copyright (c) 2014-2015 Samsung Electronics Co., Ltd All Rights Reserved
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License
+ */
+/**
+ * @file        src/include/cynara-session.h
+ * @author      Aleksander Zdyb <a.zdyb@samsung.com>
+ * @author      Radoslaw Bartosiak <r.bartosiak@samsung.com.pl>
+ * @author      Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
+ * @author      Oskar Switalski <o.switalski@samsung.com>
+ * @version     1.0
+ * @brief       This file contains Cynara session helper APIs.
+ * @example     cynara-session.example
+ */
+
+#ifndef CYNARA_SESSION_H
+#define CYNARA_SESSION_H
+
+#include <sys/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \par Description:
+ * Creates a client session string based on pid and time of creation of client process
+ *
+ * \par Purpose:
+ * This function can be used to create session string identifier used in cynara_check()
+ * and cynara_async_create_request() functions defined in  client libraries.
+ *
+ * \par Typical use case:
+ * The function is called before the call of cynara_check() or cynara_async_create_request()
+ * function. Returned string is used as client_session param in cynara_check() or
+ * cynara_async_create_request() function. String is released with free() function.
+ *
+ * \par Method of function operation:
+ * The function generates client session based on the pid and start time of the client process.
+ * Time is acquired from /proc/PID directory.
+ *
+ * \par Sync (or) Async:
+ * This is a synchronous API.
+ *
+ * \par Thread safety:
+ * This function is thread-safe.
+ *
+ * \par Important notes:
+ * Memory for returned string is obtained with malloc(), and should be freed with free().
+ *
+ * \param[in] client_pid client application process identifier (PID).
+ *
+ * \return session string on success
+ * \return NULL on error
+ */
+char *cynara_session_from_pid(pid_t client_pid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CYNARA_SESSION_H */