diff options
Diffstat (limited to 'hvac-demo-bindings.c')
-rw-r--r-- | hvac-demo-bindings.c | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/hvac-demo-bindings.c b/hvac-demo-bindings.c new file mode 100644 index 0000000..b43cfa1 --- /dev/null +++ b/hvac-demo-bindings.c @@ -0,0 +1,352 @@ +/* + * Copyright (C) 2015, 2016 "IoT.bzh" + * Author "Romain Forlot" + * Author "Jose Bolo" + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#define _GNU_SOURCE + +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <sys/ioctl.h> +#include <net/if.h> +#include <linux/can.h> + +#include <json-c/json.h> + +#include <afb/afb-binding.h> +#include <afb/afb-service-itf.h> + +#define CAN_DEV "can0" + +#define SIMULATE_HVAC + +static const struct afb_binding_interface *interface; + +// Initialize CAN hvac array that will be sent trough the socket +static char *can_hvac_components[8] = { + "LeftTemperature", + "RightTemperature", + "Temperature", + NULL, + "FanSpeed", + NULL, + NULL, + NULL +}; + +// Initialize CAN hvac array that will be sent trough the socket +static uint8_t can_hvac_values[8] = { + 21, // LeftTemperature + 21, // RightTemperature + 21, // AverageTemperature + 240, // Don't know why 240 but it was 0xF0 in the original amb hvacplugin + 0, // FanSpeed + 1, // Don't know why 1 but it was 0x01 in the original amb hvacplugin + 0, // Don't know why 0 but it was 0x00 in the original amb hvacplugin + 0 // Don't know why 0 but it was 0x00 in the original amb hvacplugin +}; + +struct can_handler { + int socket; + struct sockaddr_can txAddress; +}; + +static struct can_handler can_handler = { .socket = -1 }; + +/*****************************************************************************************/ +/*****************************************************************************************/ +/** **/ +/** **/ +/** SECTION: HANDLE CAN DEVICE **/ +/** **/ +/** **/ +/*****************************************************************************************/ +/*****************************************************************************************/ + +static int open_can_dev() +{ +#if defined(SIMULATE_HVAC) + can_handler.socket = 0; + return 0; +#else + struct ifreq ifr; + + can_handler.socket = socket(PF_CAN, SOCK_RAW, CAN_RAW); + if (can_handler.socket < 0) + { + ERROR(interface, "socket could not be created"); + } + else + { + // Attemts to open a socket to CAN bus + strcpy(ifr.ifr_name, CAN_DEV); + if(ioctl(can_handler.socket, SIOCGIFINDEX, &ifr) < 0) + { + ERROR(interface, "ioctl failed"); + } + else + { + can_handler.txAddress.can_family = AF_CAN; + can_handler.txAddress.can_ifindex = ifr.ifr_ifindex; + + // And bind it to txAddress + if (bind(can_handler.socket, (struct sockaddr *)&can_handler.txAddress, sizeof(can_handler.txAddress)) < 0) + { + ERROR(interface, "bind failed"); + } + else { + return 0; + } + } + close(can_handler.socket); + can_handler.socket = -1; + } + return -1; +#endif +} + +// Get original get temperature function from cpp hvacplugin code +static uint8_t get_temperature(uint8_t value) +{ + int result = ((0xF0 - 0x10) / 15) * value - 16; + if (result < 0x10) + result = 0x10; + if (result > 0xF0) + result = 0xF0; + + return (uint8_t)result; +} + +static int write_can() +{ + struct can_frame txCanFrame; + int rc = 0; + + rc = can_handler.socket; + if (rc >= 0) + { + // Hardcoded can_id and dlc (data lenght code) + txCanFrame.can_id = 0x30; + txCanFrame.can_dlc = 8; + txCanFrame.data[0] = get_temperature(can_hvac_values[0]); + txCanFrame.data[1] = get_temperature(can_hvac_values[1]); + txCanFrame.data[2] = get_temperature((can_hvac_values[0] + can_hvac_values[1]) / 2); + txCanFrame.data[3] = can_hvac_values[3]; + txCanFrame.data[4] = can_hvac_values[4]; + txCanFrame.data[5] = can_hvac_values[5]; + txCanFrame.data[6] = can_hvac_values[6]; + txCanFrame.data[7] = can_hvac_values[7]; + +#if defined(SIMULATE_HVAC) + DEBUG(interface, "WRITING CAN: %d %d [%02x %02x %02x %02x %02x %02x %02x %02x]\n", + txCanFrame.can_id, txCanFrame.can_dlc, + txCanFrame.data[0], txCanFrame.data[1], txCanFrame.data[2], txCanFrame.data[3], + txCanFrame.data[4], txCanFrame.data[5], txCanFrame.data[6], txCanFrame.data[7]); +#else + rc = sendto(can_handler.socket, &txCanFrame, sizeof(struct can_frame), 0, + (struct sockaddr*)&can_handler.txAddress, sizeof(can_handler.txAddress)); + if (rc < 0) + { + ERROR(interface, "Sending can frame failed"); + } +#endif + } + else + { + ERROR(interface, "socket not initialized"); + } + return rc; +} + +static uint8_t read_temp_left_zone() +{ + return can_hvac_values[0]; +} + +static uint8_t read_temp_right_zone() +{ + return can_hvac_values[1]; +} + +static uint8_t read_fanspeed() +{ + return can_hvac_values[4]; +} + +/*****************************************************************************************/ +/*****************************************************************************************/ +/** **/ +/** **/ +/** SECTION: BINDING VERBS IMPLEMENTATION **/ +/** **/ +/** **/ +/*****************************************************************************************/ +/*****************************************************************************************/ + +/* + * @brief Get fan speed HVAC system + * + * @param struct afb_req : an afb request structure + * + */ +static void get_fanspeed(struct afb_req request) +{ + json_object *ret_json; + uint8_t fanspeed = read_fanspeed(); + + ret_json = json_object_new_object(); + json_object_object_add(ret_json, "FanSpeed", json_object_new_int(fanspeed)); + + afb_req_success(request, ret_json, NULL); +} + +/* + * @brief Read Consign right zone temperature for HVAC system + * + * @param struct afb_req : an afb request structure + * + */ +static void get_temp_right_zone(struct afb_req request) +{ + json_object *ret_json; + uint8_t temp = read_temp_right_zone(); + + ret_json = json_object_new_object(); + json_object_object_add(ret_json, "RightTemperature", json_object_new_int(temp)); + + afb_req_success(request, ret_json, NULL); +} + +/* + * @brief Read Consign left zone temperature for HVAC system + * + * @param struct afb_req : an afb request structure + * + */ +static void get_temp_left_zone(struct afb_req request) +{ + json_object *ret_json; + uint8_t temp = read_temp_left_zone(); + + ret_json = json_object_new_object(); + json_object_object_add(ret_json, "LeftTemperature", json_object_new_int(temp)); + + afb_req_success(request, ret_json, NULL); +} + +/* + * @brief Read all values + * + * @param struct afb_req : an afb request structure + * + */ +static void get(struct afb_req request) +{ + json_object *ret_json; + + ret_json = json_object_new_object(); + json_object_object_add(ret_json, "LeftTemperature", json_object_new_int(read_temp_left_zone())); + json_object_object_add(ret_json, "RightTemperature", json_object_new_int(read_temp_right_zone())); + json_object_object_add(ret_json, "FanSpeed", json_object_new_int(read_fanspeed())); + + afb_req_success(request, ret_json, NULL); +} + +/* + * @brief Set a component value using a json object retrieved from request + * + * @param struct afb_req : an afb request structure + * + */ +static void set(struct afb_req request) +{ + int i, rc, x; + struct json_object *query, *val; + uint8_t values[sizeof can_hvac_components / sizeof *can_hvac_components]; + uint8_t saves[sizeof can_hvac_components / sizeof *can_hvac_components]; + + /* records initial values */ + memcpy(values, can_hvac_values, sizeof values); + memcpy(saves, can_hvac_values, sizeof saves); + + /* Loop getting arguments */ + query = afb_req_json(request); + i = (int)(sizeof can_hvac_components / sizeof *can_hvac_components); + while (i) + { + if (json_object_object_get_ex(query, can_hvac_components[--i], &val)) + { + if (!json_object_is_type(json_type_int)) + { + afb_req_fail_f(request, "bad-request", + "argument '%s' isn't integer", can_hvac_components[i]); + return; + } + x = json_object_get_int(val); + if (x < 0 || x > 255) + { + afb_req_fail_f(request, "bad-request", + "argument '%s' is out of bounds", can_hvac_components[i]); + return; + } + values[i] = (uint8_t)x; + } + } + + /* attemps to set new values */ + memcpy(can_hvac_values, values, sizeof values); + rc = nchg ? write_can() : 0; + if (rc >= 0) + afb_req_success(request, NULL, nerr ? "error detected" : NULL); + else { + /* restore initial values */ + memcpy(can_hvac_values, saves, sizeof saves); + afb_req_fail(request, "error", "CAN error"); + } +} + +// TODO: Have to change session management flag to AFB_SESSION_CHECK to use token auth +static const struct afb_verb_desc_v1 verbs[]= { + {"get_temp_left_zone" , AFB_SESSION_NONE, get_temp_left_zone , "Get the left zone temperature"}, + {"get_temp_right_zone" , AFB_SESSION_NONE, get_temp_right_zone , "Get the right zone temperature"}, + {"get_fanspeed" , AFB_SESSION_NONE, get_fanspeed , "Read fan speed"}, + {"get" , AFB_SESSION_NONE, get , "Read all values"}, + {"set" , AFB_SESSION_NONE, set , "Set a HVAC component value"}, + {NULL} +}; + +static const struct afb_binding binding_desc = { + .type = AFB_BINDING_VERSION_1, + .v1 = { + .info = "hvac service", + .prefix = "hvac", + .verbs = verbs + } +}; + +const struct afb_binding *afbBindingV1Register (const struct afb_binding_interface *itf) +{ + interface = itf; + + return &binding_desc; +} + +int afbBindingV1ServiceInit(struct afb_service service) +{ + return open_can_dev(); +} + |