diff options
Diffstat (limited to 'driver/hdm-dim2/dim2_hdm.c')
| -rw-r--r-- | driver/hdm-dim2/dim2_hdm.c | 913 |
1 files changed, 913 insertions, 0 deletions
diff --git a/driver/hdm-dim2/dim2_hdm.c b/driver/hdm-dim2/dim2_hdm.c new file mode 100644 index 0000000..87039d9 --- /dev/null +++ b/driver/hdm-dim2/dim2_hdm.c @@ -0,0 +1,913 @@ +/* + * dim2_hdm.c - MediaLB DIM2 Hardware Dependent Module + * + * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This file is licensed under GPLv2. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/sched.h> +#include <linux/kthread.h> + +#include <mostcore.h> +#include <networking.h> +#include "dim2_hal.h" +#include "dim2_hdm.h" +#include "dim2_errors.h" +#include "dim2_sysfs.h" + +#define DMA_CHANNELS (32 - 1) /* channel 0 is a system channel */ + +#define MAX_BUFFERS_PACKET 32 +#define MAX_BUFFERS_STREAMING 32 +#define MAX_BUF_SIZE_PACKET 2048 +#define MAX_BUF_SIZE_STREAMING (8 * 1024) + +/* command line parameter to select clock speed */ +static char *clock_speed; +module_param(clock_speed, charp, 0); +MODULE_PARM_DESC(clock_speed, "MediaLB Clock Speed"); + +/* + * The parameter representing the number of frames per sub-buffer for + * synchronous channels. Valid values: [0 .. 6]. + * + * The values 0, 1, 2, 3, 4, 5, 6 represent corresponding number of frames per + * sub-buffer 1, 2, 4, 8, 16, 32, 64. + */ +static u8 fcnt = 4; /* (1 << fcnt) frames per subbuffer */ +module_param(fcnt, byte, 0); +MODULE_PARM_DESC(fcnt, "Num of frames per sub-buffer for sync channels as a power of 2"); + +/* + * ############################################################################# + * + * The define below activates an utility function used by HAL-simu + * for calling DIM interrupt handler. + * It is used only for TEST PURPOSE and shall be commented before release. + * + * ############################################################################# + */ +/* #define ENABLE_HDM_TEST */ + +static DEFINE_SPINLOCK(dim_lock); + +static void dim2_tasklet_fn(unsigned long data); +static DECLARE_TASKLET(dim2_tasklet, dim2_tasklet_fn, 0); + +/** + * struct hdm_channel - private structure to keep channel specific data + * @is_initialized: identifier to know whether the channel is initialized + * @ch: HAL specific channel data + * @pending_list: list to keep MBO's before starting transfer + * @started_list: list to keep MBO's after starting transfer + * @direction: channel direction (TX or RX) + * @data_type: channel data type + */ +struct hdm_channel { + char name[sizeof "caNNN"]; + bool is_initialized; + struct dim_channel ch; + struct list_head pending_list; /* before dim_enqueue_buffer() */ + struct list_head started_list; /* after dim_enqueue_buffer() */ + enum most_channel_direction direction; + enum most_channel_data_type data_type; +}; + +/** + * struct dim2_hdm - private structure to keep interface specific data + * @hch: an array of channel specific data + * @most_iface: most interface structure + * @capabilities: an array of channel capability data + * @io_base: I/O register base address + * @irq_ahb0: dim2 AHB0 irq number + * @clk_speed: user selectable (through command line parameter) clock speed + * @netinfo_task: thread to deliver network status + * @netinfo_waitq: waitq for the thread to sleep + * @deliver_netinfo: to identify whether network status received + * @mac_addrs: INIC mac address + * @link_state: network link state + * @atx_idx: index of async tx channel + */ +struct dim2_hdm { + struct hdm_channel hch[DMA_CHANNELS]; + struct most_channel_capability capabilities[DMA_CHANNELS]; + struct most_interface most_iface; + char name[16 + sizeof "dim2-"]; + void __iomem *io_base; + unsigned int irq_ahb0; + int clk_speed; + struct task_struct *netinfo_task; + wait_queue_head_t netinfo_waitq; + int deliver_netinfo; + unsigned char mac_addrs[6]; + unsigned char link_state; + int atx_idx; + struct medialb_bus bus; +}; + +#define iface_to_hdm(iface) container_of(iface, struct dim2_hdm, most_iface) + +/* Macro to identify a network status message */ +#define PACKET_IS_NET_INFO(p) \ + (((p)[1] == 0x18) && ((p)[2] == 0x05) && ((p)[3] == 0x0C) && \ + ((p)[13] == 0x3C) && ((p)[14] == 0x00) && ((p)[15] == 0x0A)) + +#if defined(ENABLE_HDM_TEST) +static struct dim2_hdm *test_dev; +#endif + +bool dim2_sysfs_get_state_cb(void) +{ + bool state; + unsigned long flags; + + spin_lock_irqsave(&dim_lock, flags); + state = dim_get_lock_state(); + spin_unlock_irqrestore(&dim_lock, flags); + + return state; +} + +/** + * dimcb_io_read - callback from HAL to read an I/O register + * @ptr32: register address + */ +u32 dimcb_io_read(u32 __iomem *ptr32) +{ + return readl(ptr32); +} + +/** + * dimcb_io_write - callback from HAL to write value to an I/O register + * @ptr32: register address + * @value: value to write + */ +void dimcb_io_write(u32 __iomem *ptr32, u32 value) +{ + writel(value, ptr32); +} + +/** + * dimcb_on_error - callback from HAL to report miscommunication between + * HDM and HAL + * @error_id: Error ID + * @error_message: Error message. Some text in a free format + */ +void dimcb_on_error(u8 error_id, const char *error_message) +{ + pr_err("dimcb_on_error: error_id - %d, error_message - %s\n", error_id, + error_message); +} + +/** + * startup_dim - initialize the dim2 interface + * @pdev: platform device + * + * Get the value of command line parameter "clock_speed" if given or use the + * default value, enable the clock and PLL, and initialize the dim2 interface. + */ +static int startup_dim(struct platform_device *pdev) +{ + struct dim2_hdm *dev = platform_get_drvdata(pdev); + struct dim2_platform_data *pdata = pdev->dev.platform_data; + u8 hal_ret; + + dev->clk_speed = -1; + + if (clock_speed) { + if (!strcmp(clock_speed, "256fs")) + dev->clk_speed = CLK_256FS; + else if (!strcmp(clock_speed, "512fs")) + dev->clk_speed = CLK_512FS; + else if (!strcmp(clock_speed, "1024fs")) + dev->clk_speed = CLK_1024FS; + else if (!strcmp(clock_speed, "2048fs")) + dev->clk_speed = CLK_2048FS; + else if (!strcmp(clock_speed, "3072fs")) + dev->clk_speed = CLK_3072FS; + else if (!strcmp(clock_speed, "4096fs")) + dev->clk_speed = CLK_4096FS; + else if (!strcmp(clock_speed, "6144fs")) + dev->clk_speed = CLK_6144FS; + else if (!strcmp(clock_speed, "8192fs")) + dev->clk_speed = CLK_8192FS; + } + + if (dev->clk_speed == -1) { + pr_info("Bad or missing clock speed parameter, using default value: 3072fs\n"); + dev->clk_speed = CLK_3072FS; + } else { + pr_info("Selected clock speed: %s\n", clock_speed); + } + if (pdata && pdata->init) { + int ret = pdata->init(pdata, dev->io_base, dev->clk_speed); + + if (ret) + return ret; + } + + pr_info("sync: num of frames per sub-buffer: %u\n", fcnt); + hal_ret = dim_startup(dev->io_base, dev->clk_speed, fcnt); + if (hal_ret != DIM_NO_ERROR) { + pr_err("dim_startup failed: %d\n", hal_ret); + if (pdata && pdata->destroy) + pdata->destroy(pdata); + return -ENODEV; + } + + return 0; +} + +/** + * try_start_dim_transfer - try to transfer a buffer on a channel + * @hdm_ch: channel specific data + * + * Transfer a buffer from pending_list if the channel is ready + */ +static int try_start_dim_transfer(struct hdm_channel *hdm_ch) +{ + u16 buf_size; + struct list_head *head = &hdm_ch->pending_list; + struct mbo *mbo; + unsigned long flags; + struct dim_ch_state_t st; + + BUG_ON(!hdm_ch); + BUG_ON(!hdm_ch->is_initialized); + + spin_lock_irqsave(&dim_lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(&dim_lock, flags); + return -EAGAIN; + } + + if (!dim_get_channel_state(&hdm_ch->ch, &st)->ready) { + spin_unlock_irqrestore(&dim_lock, flags); + return -EAGAIN; + } + + mbo = list_first_entry(head, struct mbo, list); + buf_size = mbo->buffer_length; + + BUG_ON(mbo->bus_address == 0); + if (!dim_enqueue_buffer(&hdm_ch->ch, mbo->bus_address, buf_size)) { + list_del(head->next); + spin_unlock_irqrestore(&dim_lock, flags); + mbo->processed_length = 0; + mbo->status = MBO_E_INVAL; + mbo->complete(mbo); + return -EFAULT; + } + + list_move_tail(head->next, &hdm_ch->started_list); + spin_unlock_irqrestore(&dim_lock, flags); + + return 0; +} + +/** + * deliver_netinfo_thread - thread to deliver network status to mostcore + * @data: private data + * + * Wait for network status and deliver it to mostcore once it is received + */ +static int deliver_netinfo_thread(void *data) +{ + struct dim2_hdm *dev = data; + + while (!kthread_should_stop()) { + wait_event_interruptible(dev->netinfo_waitq, + dev->deliver_netinfo || + kthread_should_stop()); + + if (dev->deliver_netinfo) { + dev->deliver_netinfo--; + most_deliver_netinfo(&dev->most_iface, dev->link_state, + dev->mac_addrs); + } + } + + return 0; +} + +/** + * retrieve_netinfo - retrieve network status from received buffer + * @dev: private data + * @mbo: received MBO + * + * Parse the message in buffer and get node address, link state, MAC address. + * Wake up a thread to deliver this status to mostcore + */ +static void retrieve_netinfo(struct dim2_hdm *dev, struct mbo *mbo) +{ + u8 *data = mbo->virt_address; + u8 *mac = dev->mac_addrs; + + pr_info("Node Address: 0x%03x\n", (u16)data[16] << 8 | data[17]); + dev->link_state = data[18]; + pr_info("NIState: %d\n", dev->link_state); + memcpy(mac, data + 19, 6); + pr_info("MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + dev->deliver_netinfo++; + wake_up_interruptible(&dev->netinfo_waitq); +} + +/** + * service_done_flag - handle completed buffers + * @dev: private data + * @ch_idx: channel index + * + * Return back the completed buffers to mostcore, using completion callback + */ +static void service_done_flag(struct dim2_hdm *dev, int ch_idx) +{ + struct hdm_channel *hdm_ch = dev->hch + ch_idx; + struct dim_ch_state_t st; + struct list_head *head; + struct mbo *mbo; + int done_buffers; + unsigned long flags; + u8 *data; + + BUG_ON(!hdm_ch); + BUG_ON(!hdm_ch->is_initialized); + + spin_lock_irqsave(&dim_lock, flags); + + done_buffers = dim_get_channel_state(&hdm_ch->ch, &st)->done_buffers; + if (!done_buffers) { + spin_unlock_irqrestore(&dim_lock, flags); + return; + } + + if (!dim_detach_buffers(&hdm_ch->ch, done_buffers)) { + spin_unlock_irqrestore(&dim_lock, flags); + return; + } + spin_unlock_irqrestore(&dim_lock, flags); + + head = &hdm_ch->started_list; + + while (done_buffers) { + spin_lock_irqsave(&dim_lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(&dim_lock, flags); + pr_crit("hard error: started_mbo list is empty whereas DIM2 has sent buffers\n"); + break; + } + + mbo = list_first_entry(head, struct mbo, list); + list_del(head->next); + spin_unlock_irqrestore(&dim_lock, flags); + + data = mbo->virt_address; + + if (hdm_ch->data_type == MOST_CH_ASYNC && + hdm_ch->direction == MOST_CH_RX && + PACKET_IS_NET_INFO(data)) { + retrieve_netinfo(dev, mbo); + + spin_lock_irqsave(&dim_lock, flags); + list_add_tail(&mbo->list, &hdm_ch->pending_list); + spin_unlock_irqrestore(&dim_lock, flags); + } else { + if (hdm_ch->data_type == MOST_CH_CONTROL || + hdm_ch->data_type == MOST_CH_ASYNC) { + u32 const data_size = + (u32)data[0] * 256 + data[1] + 2; + + mbo->processed_length = + min_t(u32, data_size, + mbo->buffer_length); + } else { + mbo->processed_length = mbo->buffer_length; + } + mbo->status = MBO_SUCCESS; + mbo->complete(mbo); + } + + done_buffers--; + } +} + +static struct dim_channel **get_active_channels(struct dim2_hdm *dev, + struct dim_channel **buffer) +{ + int idx = 0; + int ch_idx; + + for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) { + if (dev->hch[ch_idx].is_initialized) + buffer[idx++] = &dev->hch[ch_idx].ch; + } + buffer[idx++] = NULL; + + return buffer; +} + +/** + * dim2_tasklet_fn - tasklet function + * @data: private data + * + * Service each initialized channel, if needed + */ +static void dim2_tasklet_fn(unsigned long data) +{ + struct dim2_hdm *dev = (struct dim2_hdm *)data; + unsigned long flags; + int ch_idx; + + for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) { + if (!dev->hch[ch_idx].is_initialized) + continue; + + spin_lock_irqsave(&dim_lock, flags); + dim_service_channel(&dev->hch[ch_idx].ch); + spin_unlock_irqrestore(&dim_lock, flags); + + service_done_flag(dev, ch_idx); + while (!try_start_dim_transfer(dev->hch + ch_idx)) + continue; + } +} + +/** + * dim2_ahb_isr - interrupt service routine + * @irq: irq number + * @_dev: private data + * + * Acknowledge the interrupt and schedule a tasklet to service channels. + * Return IRQ_HANDLED. + */ +static irqreturn_t dim2_ahb_isr(int irq, void *_dev) +{ + struct dim2_hdm *dev = _dev; + struct dim_channel *buffer[DMA_CHANNELS + 1]; + unsigned long flags; + + spin_lock_irqsave(&dim_lock, flags); + dim_service_irq(get_active_channels(dev, buffer)); + spin_unlock_irqrestore(&dim_lock, flags); + +#if !defined(ENABLE_HDM_TEST) + dim2_tasklet.data = (unsigned long)dev; + tasklet_schedule(&dim2_tasklet); +#else + dim2_tasklet_fn((unsigned long)dev); +#endif + return IRQ_HANDLED; +} + +#if defined(ENABLE_HDM_TEST) + +/* + * Utility function used by HAL-simu for calling DIM interrupt handler. + * It is used only for TEST PURPOSE. + */ +void raise_dim_interrupt(void) +{ + (void)dim2_ahb_isr(0, test_dev); +} +#endif + +/** + * complete_all_mbos - complete MBO's in a list + * @head: list head + * + * Delete all the entries in list and return back MBO's to mostcore using + * completion call back. + */ +static void complete_all_mbos(struct list_head *head) +{ + unsigned long flags; + struct mbo *mbo; + + for (;;) { + spin_lock_irqsave(&dim_lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(&dim_lock, flags); + break; + } + + mbo = list_first_entry(head, struct mbo, list); + list_del(head->next); + spin_unlock_irqrestore(&dim_lock, flags); + + mbo->processed_length = 0; + mbo->status = MBO_E_CLOSE; + mbo->complete(mbo); + } +} + +/** + * configure_channel - initialize a channel + * @iface: interface the channel belongs to + * @channel: channel to be configured + * @channel_config: structure that holds the configuration information + * + * Receives configuration information from mostcore and initialize + * the corresponding channel. Return 0 on success, negative on failure. + */ +static int configure_channel(struct most_interface *most_iface, int ch_idx, + struct most_channel_config *ccfg) +{ + struct dim2_hdm *dev = iface_to_hdm(most_iface); + bool const is_tx = ccfg->direction == MOST_CH_TX; + u16 const sub_size = ccfg->subbuffer_size; + u16 const buf_size = ccfg->buffer_size; + u16 new_size; + unsigned long flags; + u8 hal_ret; + int const ch_addr = ch_idx * 2 + 2; + struct hdm_channel *const hdm_ch = dev->hch + ch_idx; + + BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS); + + if (hdm_ch->is_initialized) + return -EPERM; + + switch (ccfg->data_type) { + case MOST_CH_CONTROL: + new_size = dim_norm_ctrl_async_buffer_size(buf_size); + if (new_size == 0) { + pr_err("%s: too small buffer size\n", hdm_ch->name); + return -EINVAL; + } + ccfg->buffer_size = new_size; + if (new_size != buf_size) + pr_warn("%s: fixed buffer size (%d -> %d)\n", + hdm_ch->name, buf_size, new_size); + spin_lock_irqsave(&dim_lock, flags); + hal_ret = dim_init_control(&hdm_ch->ch, is_tx, ch_addr, + buf_size); + break; + case MOST_CH_ASYNC: + new_size = dim_norm_ctrl_async_buffer_size(buf_size); + if (new_size == 0) { + pr_err("%s: too small buffer size\n", hdm_ch->name); + return -EINVAL; + } + ccfg->buffer_size = new_size; + if (new_size != buf_size) + pr_warn("%s: fixed buffer size (%d -> %d)\n", + hdm_ch->name, buf_size, new_size); + spin_lock_irqsave(&dim_lock, flags); + hal_ret = dim_init_async(&hdm_ch->ch, is_tx, ch_addr, buf_size); + break; + case MOST_CH_ISOC_AVP: + new_size = dim_norm_isoc_buffer_size(buf_size, sub_size); + if (new_size == 0) { + pr_err("%s: invalid sub-buffer size or too small buffer size\n", + hdm_ch->name); + return -EINVAL; + } + ccfg->buffer_size = new_size; + if (new_size != buf_size) + pr_warn("%s: fixed buffer size (%d -> %d)\n", + hdm_ch->name, buf_size, new_size); + spin_lock_irqsave(&dim_lock, flags); + hal_ret = dim_init_isoc(&hdm_ch->ch, is_tx, ch_addr, sub_size); + break; + case MOST_CH_SYNC: + new_size = dim_norm_sync_buffer_size(buf_size, sub_size); + if (new_size == 0) { + pr_err("%s: invalid sub-buffer size or too small buffer size\n", + hdm_ch->name); + return -EINVAL; + } + ccfg->buffer_size = new_size; + if (new_size != buf_size) + pr_warn("%s: fixed buffer size (%d -> %d)\n", + hdm_ch->name, buf_size, new_size); + spin_lock_irqsave(&dim_lock, flags); + hal_ret = dim_init_sync(&hdm_ch->ch, is_tx, ch_addr, sub_size); + break; + default: + pr_err("%s: configure failed, bad channel type: %d\n", + hdm_ch->name, ccfg->data_type); + return -EINVAL; + } + + if (hal_ret != DIM_NO_ERROR) { + spin_unlock_irqrestore(&dim_lock, flags); + pr_err("%s: configure failed (%d), type: %d, is_tx: %d\n", + hdm_ch->name, hal_ret, ccfg->data_type, (int)is_tx); + return -ENODEV; + } + + hdm_ch->data_type = ccfg->data_type; + hdm_ch->direction = ccfg->direction; + hdm_ch->is_initialized = true; + + if (hdm_ch->data_type == MOST_CH_ASYNC && + hdm_ch->direction == MOST_CH_TX && + dev->atx_idx < 0) + dev->atx_idx = ch_idx; + + spin_unlock_irqrestore(&dim_lock, flags); + + return 0; +} + +/** + * enqueue - enqueue a buffer for data transfer + * @iface: intended interface + * @channel: ID of the channel the buffer is intended for + * @mbo: pointer to the buffer object + * + * Push the buffer into pending_list and try to transfer one buffer from + * pending_list. Return 0 on success, negative on failure. + */ +static int enqueue(struct most_interface *most_iface, int ch_idx, + struct mbo *mbo) +{ + struct dim2_hdm *dev = iface_to_hdm(most_iface); + struct hdm_channel *hdm_ch = dev->hch + ch_idx; + unsigned long flags; + + BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS); + + if (!hdm_ch->is_initialized) + return -EPERM; + + if (mbo->bus_address == 0) + return -EFAULT; + + spin_lock_irqsave(&dim_lock, flags); + list_add_tail(&mbo->list, &hdm_ch->pending_list); + spin_unlock_irqrestore(&dim_lock, flags); + + (void)try_start_dim_transfer(hdm_ch); + + return 0; +} + +/** + * request_netinfo - triggers retrieving of network info + * @iface: pointer to the interface + * @channel_id: corresponding channel ID + * + * Send a command to INIC which triggers retrieving of network info by means of + * "Message exchange over MDP/MEP". Return 0 on success, negative on failure. + */ +static void request_netinfo(struct most_interface *most_iface, int ch_idx) +{ + struct dim2_hdm *dev = iface_to_hdm(most_iface); + struct mbo *mbo; + u8 *data; + + if (dev->atx_idx < 0) { + pr_err("Async Tx Not initialized\n"); + return; + } + + mbo = most_get_mbo(&dev->most_iface, dev->atx_idx, NULL); + if (!mbo) + return; + + mbo->buffer_length = 5; + + data = mbo->virt_address; + + data[0] = 0x00; /* PML High byte */ + data[1] = 0x03; /* PML Low byte */ + data[2] = 0x02; /* PMHL */ + data[3] = 0x08; /* FPH */ + data[4] = 0x40; /* FMF (FIFO cmd msg - Triggers NAOverMDP) */ + + most_submit_mbo(mbo); +} + +/** + * poison_channel - poison buffers of a channel + * @iface: pointer to the interface the channel to be poisoned belongs to + * @channel_id: corresponding channel ID + * + * Destroy a channel and complete all the buffers in both started_list & + * pending_list. Return 0 on success, negative on failure. + */ +static int poison_channel(struct most_interface *most_iface, int ch_idx) +{ + struct dim2_hdm *dev = iface_to_hdm(most_iface); + struct hdm_channel *hdm_ch = dev->hch + ch_idx; + unsigned long flags; + u8 hal_ret; + int ret = 0; + + BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS); + + if (!hdm_ch->is_initialized) + return -EPERM; + + tasklet_disable(&dim2_tasklet); + spin_lock_irqsave(&dim_lock, flags); + hal_ret = dim_destroy_channel(&hdm_ch->ch); + hdm_ch->is_initialized = false; + if (ch_idx == dev->atx_idx) + dev->atx_idx = -1; + spin_unlock_irqrestore(&dim_lock, flags); + tasklet_enable(&dim2_tasklet); + if (hal_ret != DIM_NO_ERROR) { + pr_err("HAL Failed to close channel %s\n", hdm_ch->name); + ret = -EFAULT; + } + + complete_all_mbos(&hdm_ch->started_list); + complete_all_mbos(&hdm_ch->pending_list); + + return ret; +} + +/* + * dim2_probe - dim2 probe handler + * @pdev: platform device structure + * + * Register the dim2 interface with mostcore and initialize it. + * Return 0 on success, negative on failure. + */ +static int dim2_probe(struct platform_device *pdev) +{ + struct dim2_hdm *dev; + struct resource *res; + int ret, i; + struct kobject *kobj; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->atx_idx = -1; + + platform_set_drvdata(pdev, dev); +#if defined(ENABLE_HDM_TEST) + test_dev = dev; +#else + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->io_base)) + return PTR_ERR(dev->io_base); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get irq\n"); + return -ENODEV; + } + dev->irq_ahb0 = ret; + + ret = devm_request_irq(&pdev->dev, dev->irq_ahb0, dim2_ahb_isr, 0, + "mlb_ahb0", dev); + if (ret) { + dev_err(&pdev->dev, "failed to request IRQ: %d, err: %d\n", + dev->irq_ahb0, ret); + return ret; + } +#endif + init_waitqueue_head(&dev->netinfo_waitq); + dev->deliver_netinfo = 0; + dev->netinfo_task = kthread_run(&deliver_netinfo_thread, (void *)dev, + "dim2_netinfo"); + if (IS_ERR(dev->netinfo_task)) + return PTR_ERR(dev->netinfo_task); + + for (i = 0; i < DMA_CHANNELS; i++) { + struct most_channel_capability *cap = dev->capabilities + i; + struct hdm_channel *hdm_ch = dev->hch + i; + + INIT_LIST_HEAD(&hdm_ch->pending_list); + INIT_LIST_HEAD(&hdm_ch->started_list); + hdm_ch->is_initialized = false; + snprintf(hdm_ch->name, sizeof(hdm_ch->name), "ca%d", i * 2 + 2); + + cap->name_suffix = hdm_ch->name; + cap->direction = MOST_CH_RX | MOST_CH_TX; + cap->data_type = MOST_CH_CONTROL | MOST_CH_ASYNC | + MOST_CH_ISOC_AVP | MOST_CH_SYNC; + cap->num_buffers_packet = MAX_BUFFERS_PACKET; + cap->buffer_size_packet = MAX_BUF_SIZE_PACKET; + cap->num_buffers_streaming = MAX_BUFFERS_STREAMING; + cap->buffer_size_streaming = MAX_BUF_SIZE_STREAMING; + } + + { + const char *fmt; + + if (sizeof(res->start) == sizeof(long long)) + fmt = "dim2-%016llx"; + else if (sizeof(res->start) == sizeof(long)) + fmt = "dim2-%016lx"; + else + fmt = "dim2-%016x"; + + snprintf(dev->name, sizeof(dev->name), fmt, res->start); + } + + dev->most_iface.interface = ITYPE_MEDIALB_DIM2; + dev->most_iface.description = dev->name; + dev->most_iface.num_channels = DMA_CHANNELS; + dev->most_iface.channel_vector = dev->capabilities; + dev->most_iface.configure = configure_channel; + dev->most_iface.enqueue = enqueue; + dev->most_iface.poison_channel = poison_channel; + dev->most_iface.request_netinfo = request_netinfo; + + kobj = most_register_interface(&dev->most_iface); + if (IS_ERR(kobj)) { + ret = PTR_ERR(kobj); + dev_err(&pdev->dev, "failed to register MOST interface\n"); + goto err_stop_thread; + } + + ret = dim2_sysfs_probe(&dev->bus, kobj); + if (ret) + goto err_unreg_iface; + + ret = startup_dim(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to initialize DIM2\n"); + goto err_destroy_bus; + } + + return 0; + +err_destroy_bus: + dim2_sysfs_destroy(&dev->bus); +err_unreg_iface: + most_deregister_interface(&dev->most_iface); +err_stop_thread: + kthread_stop(dev->netinfo_task); + + return ret; +} + +/** + * dim2_remove - dim2 remove handler + * @pdev: platform device structure + * + * Unregister the interface from mostcore + */ +static int dim2_remove(struct platform_device *pdev) +{ + struct dim2_hdm *dev = platform_get_drvdata(pdev); + struct dim2_platform_data *pdata = pdev->dev.platform_data; + unsigned long flags; + + spin_lock_irqsave(&dim_lock, flags); + dim_shutdown(); + spin_unlock_irqrestore(&dim_lock, flags); + + if (pdata && pdata->destroy) + pdata->destroy(pdata); + + dim2_sysfs_destroy(&dev->bus); + most_deregister_interface(&dev->most_iface); + kthread_stop(dev->netinfo_task); + + /* + * break link to local platform_device_id struct + * to prevent crash by unload platform device module + */ + pdev->id_entry = NULL; + + return 0; +} + +static struct platform_device_id dim2_id[] = { + { "medialb_dim2" }, + { }, /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(platform, dim2_id); + +static struct platform_driver dim2_driver = { + .probe = dim2_probe, + .remove = dim2_remove, + .id_table = dim2_id, + .driver = { + .name = "hdm_dim2", + }, +}; + +module_platform_driver(dim2_driver); + +MODULE_AUTHOR("Jain Roy Ambi <JainRoy.Ambi@microchip.com>"); +MODULE_AUTHOR("Andrey Shvetsov <andrey.shvetsov@k2l.de>"); +MODULE_DESCRIPTION("MediaLB DIM2 Hardware Dependent Module"); +MODULE_LICENSE("GPL"); |