diff options
| author |   Jan-Simon Moeller <jsmoeller@linuxfoundation.org> | 2022-09-02 00:05:07 +0200 |
|---|---|---|
| committer | Jan-Simon Moeller <jsmoeller@linuxfoundation.org> | 2022-09-02 00:05:07 +0200 |
| commit | ec46ff0810a05d97d6604af75dd7fbad130a40e5 (patch) | |
| tree | 4b8037d47e388c624e60a3a70badfcec34faf2f2 /firmware-CANpico/firmware-20220805.uf2 | |
| parent | ecd7267d9ffa216610507c4f5bfd5e7a21691ebe (diff) | |
Initial version of Steering Wheel Microcontroller Firmwaresandbox/jsmoeller/WIP
Reads all buttons and sends out CAN bus messages similar to the
previous LIN converter.
Best use thonny as IDE/Editor. Board is available on ttyACM0.
Source code is stored on the board itself as:
- boot.py (blinks board at boot)
- main.py (main script that runs by default)
The steering wheel decoder is in the steering-wheel subfolder.
The monitor folder contains a simple serial monitor printing the CAN message.
You need a CANpico board for this.
The firmware used/tested with this code is in the firmware-CANpico subfolder.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I9751b6e0e7a2fc6cb6c82bb0a64719c6aa6ebe11
Diffstat (limited to 'firmware-CANpico/firmware-20220805.uf2')
| -rw-r--r-- | firmware-CANpico/firmware-20220805.uf2 | bin | 0 -> 637440 bytes |
1 files changed, 0 insertions, 0 deletions
diff --git a/firmware-CANpico/firmware-20220805.uf2 b/firmware-CANpico/firmware-20220805.uf2 Binary files differnew file mode 100644 index 0000000..9d99dcd --- /dev/null +++ b/firmware-CANpico/firmware-20220805.uf2 |