diff options
Diffstat (limited to 'include/hw/gpio')
| -rw-r--r-- | include/hw/gpio/aspeed_gpio.h | 96 | ||||
| -rw-r--r-- | include/hw/gpio/bcm2835_gpio.h | 40 | ||||
| -rw-r--r-- | include/hw/gpio/imx_gpio.h | 64 | ||||
| -rw-r--r-- | include/hw/gpio/npcm7xx_gpio.h | 55 | ||||
| -rw-r--r-- | include/hw/gpio/nrf51_gpio.h | 70 | ||||
| -rw-r--r-- | include/hw/gpio/sifive_gpio.h | 79 |
6 files changed, 404 insertions, 0 deletions
diff --git a/include/hw/gpio/aspeed_gpio.h b/include/hw/gpio/aspeed_gpio.h new file mode 100644 index 000000000..801846bef --- /dev/null +++ b/include/hw/gpio/aspeed_gpio.h @@ -0,0 +1,96 @@ +/* + * ASPEED GPIO Controller + * + * Copyright (C) 2017-2018 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#ifndef ASPEED_GPIO_H +#define ASPEED_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_ASPEED_GPIO "aspeed.gpio" +OBJECT_DECLARE_TYPE(AspeedGPIOState, AspeedGPIOClass, ASPEED_GPIO) + +#define ASPEED_GPIO_MAX_NR_SETS 8 +#define ASPEED_GPIOS_PER_SET 32 +#define ASPEED_REGS_PER_BANK 14 +#define ASPEED_GPIO_MAX_NR_REGS (ASPEED_REGS_PER_BANK * ASPEED_GPIO_MAX_NR_SETS) +#define ASPEED_GROUPS_PER_SET 4 +#define ASPEED_GPIO_NR_DEBOUNCE_REGS 3 +#define ASPEED_CHARS_PER_GROUP_LABEL 4 + +typedef struct GPIOSets GPIOSets; + +typedef struct GPIOSetProperties { + uint32_t input; + uint32_t output; + char group_label[ASPEED_GROUPS_PER_SET][ASPEED_CHARS_PER_GROUP_LABEL]; +} GPIOSetProperties; + +enum GPIORegType { + gpio_not_a_reg, + gpio_reg_data_value, + gpio_reg_direction, + gpio_reg_int_enable, + gpio_reg_int_sens_0, + gpio_reg_int_sens_1, + gpio_reg_int_sens_2, + gpio_reg_int_status, + gpio_reg_reset_tolerant, + gpio_reg_debounce_1, + gpio_reg_debounce_2, + gpio_reg_cmd_source_0, + gpio_reg_cmd_source_1, + gpio_reg_data_read, + gpio_reg_input_mask, +}; + +typedef struct AspeedGPIOReg { + uint16_t set_idx; + enum GPIORegType type; + } AspeedGPIOReg; + +struct AspeedGPIOClass { + SysBusDevice parent_obj; + const GPIOSetProperties *props; + uint32_t nr_gpio_pins; + uint32_t nr_gpio_sets; + const AspeedGPIOReg *reg_table; +}; + +struct AspeedGPIOState { + /* <private> */ + SysBusDevice parent; + + /*< public >*/ + MemoryRegion iomem; + int pending; + qemu_irq irq; + qemu_irq gpios[ASPEED_GPIO_MAX_NR_SETS][ASPEED_GPIOS_PER_SET]; + +/* Parallel GPIO Registers */ + uint32_t debounce_regs[ASPEED_GPIO_NR_DEBOUNCE_REGS]; + struct GPIOSets { + uint32_t data_value; /* Reflects pin values */ + uint32_t data_read; /* Contains last value written to data value */ + uint32_t direction; + uint32_t int_enable; + uint32_t int_sens_0; + uint32_t int_sens_1; + uint32_t int_sens_2; + uint32_t int_status; + uint32_t reset_tol; + uint32_t cmd_source_0; + uint32_t cmd_source_1; + uint32_t debounce_1; + uint32_t debounce_2; + uint32_t input_mask; + } sets[ASPEED_GPIO_MAX_NR_SETS]; +}; + +#endif /* _ASPEED_GPIO_H_ */ diff --git a/include/hw/gpio/bcm2835_gpio.h b/include/hw/gpio/bcm2835_gpio.h new file mode 100644 index 000000000..1c53a0509 --- /dev/null +++ b/include/hw/gpio/bcm2835_gpio.h @@ -0,0 +1,40 @@ +/* + * Raspberry Pi (BCM2835) GPIO Controller + * + * Copyright (c) 2017 Antfield SAS + * + * Authors: + * Clement Deschamps <clement.deschamps@antfield.fr> + * Luc Michel <luc.michel@antfield.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef BCM2835_GPIO_H +#define BCM2835_GPIO_H + +#include "hw/sd/sd.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +struct BCM2835GpioState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + /* SDBus selector */ + SDBus sdbus; + SDBus *sdbus_sdhci; + SDBus *sdbus_sdhost; + + uint8_t fsel[54]; + uint32_t lev0, lev1; + uint8_t sd_fsel; + qemu_irq out[54]; +}; + +#define TYPE_BCM2835_GPIO "bcm2835_gpio" +OBJECT_DECLARE_SIMPLE_TYPE(BCM2835GpioState, BCM2835_GPIO) + +#endif diff --git a/include/hw/gpio/imx_gpio.h b/include/hw/gpio/imx_gpio.h new file mode 100644 index 000000000..227860b9f --- /dev/null +++ b/include/hw/gpio/imx_gpio.h @@ -0,0 +1,64 @@ +/* + * i.MX processors GPIO registers definition. + * + * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef IMX_GPIO_H +#define IMX_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_IMX_GPIO "imx.gpio" +OBJECT_DECLARE_SIMPLE_TYPE(IMXGPIOState, IMX_GPIO) + +#define IMX_GPIO_MEM_SIZE 0x20 + +/* i.MX GPIO memory map */ +#define DR_ADDR 0x00 /* DATA REGISTER */ +#define GDIR_ADDR 0x04 /* DIRECTION REGISTER */ +#define PSR_ADDR 0x08 /* PAD STATUS REGISTER */ +#define ICR1_ADDR 0x0c /* INTERRUPT CONFIGURATION REGISTER 1 */ +#define ICR2_ADDR 0x10 /* INTERRUPT CONFIGURATION REGISTER 2 */ +#define IMR_ADDR 0x14 /* INTERRUPT MASK REGISTER */ +#define ISR_ADDR 0x18 /* INTERRUPT STATUS REGISTER */ +#define EDGE_SEL_ADDR 0x1c /* EDGE SEL REGISTER */ + +#define IMX_GPIO_PIN_COUNT 32 + +struct IMXGPIOState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t dr; + uint32_t gdir; + uint32_t psr; + uint64_t icr; + uint32_t imr; + uint32_t isr; + bool has_edge_sel; + uint32_t edge_sel; + bool has_upper_pin_irq; + + qemu_irq irq[2]; + qemu_irq output[IMX_GPIO_PIN_COUNT]; +}; + +#endif /* IMX_GPIO_H */ diff --git a/include/hw/gpio/npcm7xx_gpio.h b/include/hw/gpio/npcm7xx_gpio.h new file mode 100644 index 000000000..b1d771bd7 --- /dev/null +++ b/include/hw/gpio/npcm7xx_gpio.h @@ -0,0 +1,55 @@ +/* + * Nuvoton NPCM7xx General Purpose Input / Output (GPIO) + * + * Copyright 2020 Google LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef NPCM7XX_GPIO_H +#define NPCM7XX_GPIO_H + +#include "exec/memory.h" +#include "hw/sysbus.h" + +/* Number of pins managed by each controller. */ +#define NPCM7XX_GPIO_NR_PINS (32) + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM7XX_GPIO_NR_REGS (0x80 / sizeof(uint32_t)) + +typedef struct NPCM7xxGPIOState { + SysBusDevice parent; + + /* Properties to be defined by the SoC */ + uint32_t reset_pu; + uint32_t reset_pd; + uint32_t reset_osrc; + uint32_t reset_odsc; + + MemoryRegion mmio; + + qemu_irq irq; + qemu_irq output[NPCM7XX_GPIO_NR_PINS]; + + uint32_t pin_level; + uint32_t ext_level; + uint32_t ext_driven; + + uint32_t regs[NPCM7XX_GPIO_NR_REGS]; +} NPCM7xxGPIOState; + +#define TYPE_NPCM7XX_GPIO "npcm7xx-gpio" +#define NPCM7XX_GPIO(obj) \ + OBJECT_CHECK(NPCM7xxGPIOState, (obj), TYPE_NPCM7XX_GPIO) + +#endif /* NPCM7XX_GPIO_H */ diff --git a/include/hw/gpio/nrf51_gpio.h b/include/hw/gpio/nrf51_gpio.h new file mode 100644 index 000000000..8f9c2f86d --- /dev/null +++ b/include/hw/gpio/nrf51_gpio.h @@ -0,0 +1,70 @@ +/* + * nRF51 System-on-Chip general purpose input/output register definition + * + * QEMU interface: + * + sysbus MMIO regions 0: GPIO registers + * + Unnamed GPIO inputs 0-31: Set tri-state input level for GPIO pin. + * Level -1: Externally Disconnected/Floating; Pull-up/down will be regarded + * Level 0: Input externally driven LOW + * Level 1: Input externally driven HIGH + * + Unnamed GPIO outputs 0-31: + * Level -1: Disconnected/Floating + * Level 0: Driven LOW + * Level 1: Driven HIGH + * + * Accuracy of the peripheral model: + * + The nRF51 GPIO output driver supports two modes, standard and high-current + * mode. These different drive modes are not modeled and handled the same. + * + Pin SENSEing is not modeled/implemented. + * + * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + * + */ +#ifndef NRF51_GPIO_H +#define NRF51_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" +#define TYPE_NRF51_GPIO "nrf51_soc.gpio" +OBJECT_DECLARE_SIMPLE_TYPE(NRF51GPIOState, NRF51_GPIO) + +#define NRF51_GPIO_PINS 32 + +#define NRF51_GPIO_SIZE 0x1000 + +#define NRF51_GPIO_REG_OUT 0x504 +#define NRF51_GPIO_REG_OUTSET 0x508 +#define NRF51_GPIO_REG_OUTCLR 0x50C +#define NRF51_GPIO_REG_IN 0x510 +#define NRF51_GPIO_REG_DIR 0x514 +#define NRF51_GPIO_REG_DIRSET 0x518 +#define NRF51_GPIO_REG_DIRCLR 0x51C +#define NRF51_GPIO_REG_CNF_START 0x700 +#define NRF51_GPIO_REG_CNF_END 0x77C + +#define NRF51_GPIO_PULLDOWN 1 +#define NRF51_GPIO_PULLUP 3 + +struct NRF51GPIOState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + qemu_irq irq; + + uint32_t out; + uint32_t in; + uint32_t in_mask; + uint32_t dir; + uint32_t cnf[NRF51_GPIO_PINS]; + + uint32_t old_out; + uint32_t old_out_connected; + + qemu_irq output[NRF51_GPIO_PINS]; +}; + + +#endif diff --git a/include/hw/gpio/sifive_gpio.h b/include/hw/gpio/sifive_gpio.h new file mode 100644 index 000000000..fc53785c9 --- /dev/null +++ b/include/hw/gpio/sifive_gpio.h @@ -0,0 +1,79 @@ +/* + * SiFive System-on-Chip general purpose input/output register definition + * + * Copyright 2019 AdaCore + * + * Base on nrf51_gpio.c: + * + * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#ifndef SIFIVE_GPIO_H +#define SIFIVE_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SIFIVE_GPIO "sifive_soc.gpio" +typedef struct SIFIVEGPIOState SIFIVEGPIOState; +DECLARE_INSTANCE_CHECKER(SIFIVEGPIOState, SIFIVE_GPIO, + TYPE_SIFIVE_GPIO) + +#define SIFIVE_GPIO_PINS 32 + +#define SIFIVE_GPIO_SIZE 0x100 + +#define SIFIVE_GPIO_REG_VALUE 0x000 +#define SIFIVE_GPIO_REG_INPUT_EN 0x004 +#define SIFIVE_GPIO_REG_OUTPUT_EN 0x008 +#define SIFIVE_GPIO_REG_PORT 0x00C +#define SIFIVE_GPIO_REG_PUE 0x010 +#define SIFIVE_GPIO_REG_DS 0x014 +#define SIFIVE_GPIO_REG_RISE_IE 0x018 +#define SIFIVE_GPIO_REG_RISE_IP 0x01C +#define SIFIVE_GPIO_REG_FALL_IE 0x020 +#define SIFIVE_GPIO_REG_FALL_IP 0x024 +#define SIFIVE_GPIO_REG_HIGH_IE 0x028 +#define SIFIVE_GPIO_REG_HIGH_IP 0x02C +#define SIFIVE_GPIO_REG_LOW_IE 0x030 +#define SIFIVE_GPIO_REG_LOW_IP 0x034 +#define SIFIVE_GPIO_REG_IOF_EN 0x038 +#define SIFIVE_GPIO_REG_IOF_SEL 0x03C +#define SIFIVE_GPIO_REG_OUT_XOR 0x040 + +struct SIFIVEGPIOState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + qemu_irq irq[SIFIVE_GPIO_PINS]; + qemu_irq output[SIFIVE_GPIO_PINS]; + + uint32_t value; /* Actual value of the pin */ + uint32_t input_en; + uint32_t output_en; + uint32_t port; /* Pin value requested by the user */ + uint32_t pue; + uint32_t ds; + uint32_t rise_ie; + uint32_t rise_ip; + uint32_t fall_ie; + uint32_t fall_ip; + uint32_t high_ie; + uint32_t high_ip; + uint32_t low_ie; + uint32_t low_ip; + uint32_t iof_en; + uint32_t iof_sel; + uint32_t out_xor; + uint32_t in; + uint32_t in_mask; + + /* config */ + uint32_t ngpio; +}; + +#endif /* SIFIVE_GPIO_H */ |