diff options
Diffstat (limited to 'include/hw/misc/aspeed_scu.h')
-rw-r--r-- | include/hw/misc/aspeed_scu.h | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h new file mode 100644 index 000000000..c14aff2bc --- /dev/null +++ b/include/hw/misc/aspeed_scu.h @@ -0,0 +1,319 @@ +/* + * ASPEED System Control Unit + * + * Andrew Jeffery <andrew@aj.id.au> + * + * Copyright 2016 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ +#ifndef ASPEED_SCU_H +#define ASPEED_SCU_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_ASPEED_SCU "aspeed.scu" +OBJECT_DECLARE_TYPE(AspeedSCUState, AspeedSCUClass, ASPEED_SCU) +#define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400" +#define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500" +#define TYPE_ASPEED_2600_SCU TYPE_ASPEED_SCU "-ast2600" + +#define ASPEED_SCU_NR_REGS (0x1A8 >> 2) +#define ASPEED_AST2600_SCU_NR_REGS (0xE20 >> 2) + +struct AspeedSCUState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t regs[ASPEED_AST2600_SCU_NR_REGS]; + uint32_t silicon_rev; + uint32_t hw_strap1; + uint32_t hw_strap2; + uint32_t hw_prot_key; +}; + +#define AST2400_A0_SILICON_REV 0x02000303U +#define AST2400_A1_SILICON_REV 0x02010303U +#define AST2500_A0_SILICON_REV 0x04000303U +#define AST2500_A1_SILICON_REV 0x04010303U +#define AST2600_A0_SILICON_REV 0x05000303U +#define AST2600_A1_SILICON_REV 0x05010303U +#define AST2600_A2_SILICON_REV 0x05020303U +#define AST2600_A3_SILICON_REV 0x05030303U + +#define ASPEED_IS_AST2500(si_rev) ((((si_rev) >> 24) & 0xff) == 0x04) + +extern bool is_supported_silicon_rev(uint32_t silicon_rev); + + +struct AspeedSCUClass { + SysBusDeviceClass parent_class; + + const uint32_t *resets; + uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg); + uint32_t apb_divider; + uint32_t nr_regs; + const MemoryRegionOps *ops; +}; + +#define ASPEED_SCU_PROT_KEY 0x1688A8A8 + +uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); + +/* + * Extracted from Aspeed SDK v00.03.21. Fixes and extra definitions + * were added. + * + * Original header file : + * arch/arm/mach-aspeed/include/mach/regs-scu.h + * + * Copyright (C) 2012-2020 ASPEED Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * History : + * 1. 2012/12/29 Ryan Chen Create + */ + +/* SCU08 Clock Selection Register + * + * 31 Enable Video Engine clock dynamic slow down + * 30:28 Video Engine clock slow down setting + * 27 2D Engine GCLK clock source selection + * 26 2D Engine GCLK clock throttling enable + * 25:23 APB PCLK divider selection + * 22:20 LPC Host LHCLK divider selection + * 19 LPC Host LHCLK clock generation/output enable control + * 18:16 MAC AHB bus clock divider selection + * 15 SD/SDIO clock running enable + * 14:12 SD/SDIO divider selection + * 11 Reserved + * 10:8 Video port output clock delay control bit + * 7 ARM CPU/AHB clock slow down enable + * 6:4 ARM CPU/AHB clock slow down setting + * 3:2 ECLK clock source selection + * 1 CPU/AHB clock slow down idle timer + * 0 CPU/AHB clock dynamic slow down enable (defined in bit[6:4]) + */ +#define SCU_CLK_GET_PCLK_DIV(x) (((x) >> 23) & 0x7) + +/* SCU24 H-PLL Parameter Register (for Aspeed AST2400 SOC) + * + * 18 H-PLL parameter selection + * 0: Select H-PLL by strapping resistors + * 1: Select H-PLL by the programmed registers (SCU24[17:0]) + * 17 Enable H-PLL bypass mode + * 16 Turn off H-PLL + * 10:5 H-PLL Numerator + * 4 H-PLL Output Divider + * 3:0 H-PLL Denumerator + * + * (Output frequency) = 24MHz * (2-OD) * [(Numerator+2) / (Denumerator+1)] + */ + +#define SCU_AST2400_H_PLL_PROGRAMMED (0x1 << 18) +#define SCU_AST2400_H_PLL_BYPASS_EN (0x1 << 17) +#define SCU_AST2400_H_PLL_OFF (0x1 << 16) + +/* SCU24 H-PLL Parameter Register (for Aspeed AST2500 SOC) + * + * 21 Enable H-PLL reset + * 20 Enable H-PLL bypass mode + * 19 Turn off H-PLL + * 18:13 H-PLL Post Divider + * 12:5 H-PLL Numerator (M) + * 4:0 H-PLL Denumerator (N) + * + * (Output frequency) = CLKIN(24MHz) * [(M+1) / (N+1)] / (P+1) + * + * The default frequency is 792Mhz when CLKIN = 24MHz + */ + +#define SCU_H_PLL_BYPASS_EN (0x1 << 20) +#define SCU_H_PLL_OFF (0x1 << 19) + +/* SCU70 Hardware Strapping Register definition (for Aspeed AST2400 SOC) + * + * 31:29 Software defined strapping registers + * 28:27 DRAM size setting (for VGA driver use) + * 26:24 DRAM configuration setting + * 23 Enable 25 MHz reference clock input + * 22 Enable GPIOE pass-through mode + * 21 Enable GPIOD pass-through mode + * 20 Disable LPC to decode SuperIO 0x2E/0x4E address + * 19 Disable ACPI function + * 23,18 Clock source selection + * 17 Enable BMC 2nd boot watchdog timer + * 16 SuperIO configuration address selection + * 15 VGA Class Code selection + * 14 Enable LPC dedicated reset pin function + * 13:12 SPI mode selection + * 11:10 CPU/AHB clock frequency ratio selection + * 9:8 H-PLL default clock frequency selection + * 7 Define MAC#2 interface + * 6 Define MAC#1 interface + * 5 Enable VGA BIOS ROM + * 4 Boot flash memory extended option + * 3:2 VGA memory size selection + * 1:0 BMC CPU boot code selection + */ +#define SCU_AST2400_HW_STRAP_SW_DEFINE(x) ((x) << 29) +#define SCU_AST2400_HW_STRAP_SW_DEFINE_MASK (0x7 << 29) + +#define SCU_AST2400_HW_STRAP_DRAM_SIZE(x) ((x) << 27) +#define SCU_AST2400_HW_STRAP_DRAM_SIZE_MASK (0x3 << 27) +#define DRAM_SIZE_64MB 0 +#define DRAM_SIZE_128MB 1 +#define DRAM_SIZE_256MB 2 +#define DRAM_SIZE_512MB 3 + +#define SCU_AST2400_HW_STRAP_DRAM_CONFIG(x) ((x) << 24) +#define SCU_AST2400_HW_STRAP_DRAM_CONFIG_MASK (0x7 << 24) + +#define SCU_HW_STRAP_GPIOE_PT_EN (0x1 << 22) +#define SCU_HW_STRAP_GPIOD_PT_EN (0x1 << 21) +#define SCU_HW_STRAP_LPC_DEC_SUPER_IO (0x1 << 20) +#define SCU_AST2400_HW_STRAP_ACPI_DIS (0x1 << 19) + +/* bit 23, 18 [1,0] */ +#define SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(x) (((((x) & 0x3) >> 1) << 23) \ + | (((x) & 0x1) << 18)) +#define SCU_AST2400_HW_STRAP_GET_CLK_SOURCE(x) (((((x) >> 23) & 0x1) << 1) \ + | (((x) >> 18) & 0x1)) +#define SCU_AST2400_HW_STRAP_CLK_SOURCE_MASK ((0x1 << 23) | (0x1 << 18)) +#define SCU_HW_STRAP_CLK_25M_IN (0x1 << 23) +#define AST2400_CLK_24M_IN 0 +#define AST2400_CLK_48M_IN 1 +#define AST2400_CLK_25M_IN_24M_USB_CKI 2 +#define AST2400_CLK_25M_IN_48M_USB_CKI 3 + +#define SCU_HW_STRAP_CLK_48M_IN (0x1 << 18) +#define SCU_HW_STRAP_2ND_BOOT_WDT (0x1 << 17) +#define SCU_HW_STRAP_SUPER_IO_CONFIG (0x1 << 16) +#define SCU_HW_STRAP_VGA_CLASS_CODE (0x1 << 15) +#define SCU_HW_STRAP_LPC_RESET_PIN (0x1 << 14) + +#define SCU_HW_STRAP_SPI_MODE(x) ((x) << 12) +#define SCU_HW_STRAP_SPI_MODE_MASK (0x3 << 12) +#define SCU_HW_STRAP_SPI_DIS 0 +#define SCU_HW_STRAP_SPI_MASTER 1 +#define SCU_HW_STRAP_SPI_M_S_EN 2 +#define SCU_HW_STRAP_SPI_PASS_THROUGH 3 + +#define SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(x) ((x) << 10) +#define SCU_AST2400_HW_STRAP_GET_CPU_AHB_RATIO(x) (((x) >> 10) & 3) +#define SCU_AST2400_HW_STRAP_CPU_AHB_RATIO_MASK (0x3 << 10) +#define AST2400_CPU_AHB_RATIO_1_1 0 +#define AST2400_CPU_AHB_RATIO_2_1 1 +#define AST2400_CPU_AHB_RATIO_4_1 2 +#define AST2400_CPU_AHB_RATIO_3_1 3 + +#define SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(x) (((x) >> 8) & 0x3) +#define SCU_AST2400_HW_STRAP_H_PLL_CLK_MASK (0x3 << 8) +#define AST2400_CPU_384MHZ 0 +#define AST2400_CPU_360MHZ 1 +#define AST2400_CPU_336MHZ 2 +#define AST2400_CPU_408MHZ 3 + +#define SCU_HW_STRAP_MAC1_RGMII (0x1 << 7) +#define SCU_HW_STRAP_MAC0_RGMII (0x1 << 6) +#define SCU_HW_STRAP_VGA_BIOS_ROM (0x1 << 5) +#define SCU_HW_STRAP_SPI_WIDTH (0x1 << 4) + +#define SCU_HW_STRAP_VGA_SIZE_GET(x) (((x) >> 2) & 0x3) +#define SCU_HW_STRAP_VGA_MASK (0x3 << 2) +#define SCU_HW_STRAP_VGA_SIZE_SET(x) ((x) << 2) +#define VGA_8M_DRAM 0 +#define VGA_16M_DRAM 1 +#define VGA_32M_DRAM 2 +#define VGA_64M_DRAM 3 + +#define SCU_AST2400_HW_STRAP_BOOT_MODE(x) (x) +#define AST2400_NOR_BOOT 0 +#define AST2400_NAND_BOOT 1 +#define AST2400_SPI_BOOT 2 +#define AST2400_DIS_BOOT 3 + +/* + * SCU70 Hardware strapping register definition (for Aspeed AST2500 + * SoC and higher) + * + * 31 Enable SPI Flash Strap Auto Fetch Mode + * 30 Enable GPIO Strap Mode + * 29 Select UART Debug Port + * 28 Reserved (1) + * 27 Enable fast reset mode for ARM ICE debugger + * 26 Enable eSPI flash mode + * 25 Enable eSPI mode + * 24 Select DDR4 SDRAM + * 23 Select 25 MHz reference clock input mode + * 22 Enable GPIOE pass-through mode + * 21 Enable GPIOD pass-through mode + * 20 Disable LPC to decode SuperIO 0x2E/0x4E address + * 19 Enable ACPI function + * 18 Select USBCKI input frequency + * 17 Enable BMC 2nd boot watchdog timer + * 16 SuperIO configuration address selection + * 15 VGA Class Code selection + * 14 Select dedicated LPC reset input + * 13:12 SPI mode selection + * 11:9 AXI/AHB clock frequency ratio selection + * 8 Reserved (0) + * 7 Define MAC#2 interface + * 6 Define MAC#1 interface + * 5 Enable dedicated VGA BIOS ROM + * 4 Reserved (0) + * 3:2 VGA memory size selection + * 1 Reserved (1) + * 0 Disable CPU boot + */ +#define SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE (0x1 << 31) +#define SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE (0x1 << 30) +#define SCU_AST2500_HW_STRAP_UART_DEBUG (0x1 << 29) +#define UART_DEBUG_UART1 0 +#define UART_DEBUG_UART5 1 +#define SCU_AST2500_HW_STRAP_RESERVED28 (0x1 << 28) + +#define SCU_AST2500_HW_STRAP_FAST_RESET_DBG (0x1 << 27) +#define SCU_AST2500_HW_STRAP_ESPI_FLASH_ENABLE (0x1 << 26) +#define SCU_AST2500_HW_STRAP_ESPI_ENABLE (0x1 << 25) +#define SCU_AST2500_HW_STRAP_DDR4_ENABLE (0x1 << 24) +#define SCU_AST2500_HW_STRAP_25HZ_CLOCK_MODE (0x1 << 23) + +#define SCU_AST2500_HW_STRAP_ACPI_ENABLE (0x1 << 19) +#define SCU_AST2500_HW_STRAP_USBCKI_FREQ (0x1 << 18) +#define USBCKI_FREQ_24MHZ 0 +#define USBCKI_FREQ_28MHZ 1 + +#define SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(x) ((x) << 9) +#define SCU_AST2500_HW_STRAP_GET_AXI_AHB_RATIO(x) (((x) >> 9) & 7) +#define SCU_AST2500_HW_STRAP_CPU_AXI_RATIO_MASK (0x7 << 9) +#define AXI_AHB_RATIO_UNDEFINED 0 +#define AXI_AHB_RATIO_2_1 1 +#define AXI_AHB_RATIO_3_1 2 +#define AXI_AHB_RATIO_4_1 3 +#define AXI_AHB_RATIO_5_1 4 +#define AXI_AHB_RATIO_6_1 5 +#define AXI_AHB_RATIO_7_1 6 +#define AXI_AHB_RATIO_8_1 7 + +#define SCU_AST2500_HW_STRAP_RESERVED1 (0x1 << 1) +#define SCU_AST2500_HW_STRAP_DIS_BOOT (0x1 << 0) + +#define AST2500_HW_STRAP1_DEFAULTS ( \ + SCU_AST2500_HW_STRAP_RESERVED28 | \ + SCU_HW_STRAP_2ND_BOOT_WDT | \ + SCU_HW_STRAP_VGA_CLASS_CODE | \ + SCU_HW_STRAP_LPC_RESET_PIN | \ + SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ + SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ + SCU_AST2500_HW_STRAP_RESERVED1) + +#endif /* ASPEED_SCU_H */ |