diff options
Diffstat (limited to 'linux-headers/linux/vhost.h')
| -rw-r--r-- | linux-headers/linux/vhost.h | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h new file mode 100644 index 000000000..c998860d7 --- /dev/null +++ b/linux-headers/linux/vhost.h @@ -0,0 +1,153 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_VHOST_H +#define _LINUX_VHOST_H +/* Userspace interface for in-kernel virtio accelerators. */ + +/* vhost is used to reduce the number of system calls involved in virtio. + * + * Existing virtio net code is used in the guest without modification. + * + * This header includes interface used by userspace hypervisor for + * device configuration. + */ + +#include <linux/vhost_types.h> +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VHOST_FILE_UNBIND -1 + +/* ioctls */ + +#define VHOST_VIRTIO 0xAF + +/* Features bitmask for forward compatibility. Transport bits are used for + * vhost specific features. */ +#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64) +#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64) + +/* Set current process as the (exclusive) owner of this file descriptor. This + * must be called before any other vhost command. Further calls to + * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */ +#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01) +/* Give up ownership, and reset the device to default values. + * Allows subsequent call to VHOST_OWNER_SET to succeed. */ +#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02) + +/* Set up/modify memory layout */ +#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory) + +/* Write logging setup. */ +/* Memory writes can optionally be logged by setting bit at an offset + * (calculated from the physical address) from specified log base. + * The bit is set using an atomic 32 bit operation. */ +/* Set base address for logging. */ +#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) +/* Specify an eventfd file descriptor to signal on log write. */ +#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) + +/* Ring setup. */ +/* Set number of descriptors in ring. This parameter can not + * be modified while ring is running (bound to a device). */ +#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state) +/* Set addresses for the ring. */ +#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr) +/* Base value where queue looks for available descriptors */ +#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state) +/* Get accessor: reads index, writes value in num */ +#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state) + +/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN + * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL). + * The byte order cannot be changed while the device is active: trying to do so + * returns -EBUSY. + * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is + * set. + * Not all kernel configurations support this ioctl, but all configurations that + * support SET also support GET. + */ +#define VHOST_VRING_LITTLE_ENDIAN 0 +#define VHOST_VRING_BIG_ENDIAN 1 +#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) +#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) + +/* The following ioctls use eventfd file descriptors to signal and poll + * for events. */ + +/* Set eventfd to poll for added buffers */ +#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file) +/* Set eventfd to signal when buffers have beed used */ +#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file) +/* Set eventfd to signal an error */ +#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file) +/* Set busy loop timeout (in us) */ +#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23, \ + struct vhost_vring_state) +/* Get busy loop timeout (in us) */ +#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24, \ + struct vhost_vring_state) + +/* Set or get vhost backend capability */ + +/* Use message type V2 */ +#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 +/* IOTLB can accept batching hints */ +#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 + +#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) +#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) + +/* VHOST_NET specific defines */ + +/* Attach virtio net ring to a raw socket, or tap device. + * The socket must be already bound to an ethernet device, this device will be + * used for transmit. Pass fd -1 to unbind from the socket and the transmit + * device. This can be used to stop the ring (e.g. for migration). */ +#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file) + +/* VHOST_SCSI specific defines */ + +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) +/* Set and get the events missed flag */ +#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32) +#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32) + +/* VHOST_VSOCK specific defines */ + +#define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64) +#define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int) + +/* VHOST_VDPA specific defines */ + +/* Get the device id. The device ids follow the same definition of + * the device id defined in virtio-spec. + */ +#define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32) +/* Get and set the status. The status bits follow the same definition + * of the device status defined in virtio-spec. + */ +#define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8) +#define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8) +/* Get and set the device config. The device config follows the same + * definition of the device config defined in virtio-spec. + */ +#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \ + struct vhost_vdpa_config) +#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \ + struct vhost_vdpa_config) +/* Enable/disable the ring. */ +#define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \ + struct vhost_vring_state) +/* Get the max ring size. */ +#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) + +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) + +/* Get the valid iova range */ +#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ + struct vhost_vdpa_iova_range) +#endif |