diff options
Diffstat (limited to 'roms/u-boot/drivers/net/Kconfig')
| -rw-r--r-- | roms/u-boot/drivers/net/Kconfig | 837 |
1 files changed, 837 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/net/Kconfig b/roms/u-boot/drivers/net/Kconfig new file mode 100644 index 000000000..9fc28b149 --- /dev/null +++ b/roms/u-boot/drivers/net/Kconfig @@ -0,0 +1,837 @@ +source "drivers/net/phy/Kconfig" +source "drivers/net/pfe_eth/Kconfig" +source "drivers/net/fsl-mc/Kconfig" + +config DM_ETH + bool "Enable Driver Model for Ethernet drivers" + depends on DM + help + Enable driver model for Ethernet. + + The eth_*() interface will be implemented by the UCLASS_ETH class + This is currently implemented in net/eth-uclass.c + Look in include/net.h for details. + +config DM_MDIO + bool "Enable Driver Model for MDIO devices" + depends on DM_ETH && PHYLIB + help + Enable driver model for MDIO devices + + Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as + stand-alone devices. Useful in particular for systems that support + DM_ETH and have a stand-alone MDIO hardware block shared by multiple + Ethernet interfaces. + This is currently implemented in net/mdio-uclass.c + Look in include/miiphy.h for details. + +config DM_MDIO_MUX + bool "Enable Driver Model for MDIO MUX devices" + depends on DM_MDIO + help + Enable driver model for MDIO MUX devices + + Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for + systems that support DM_MDIO and integrate one or multiple muxes on + the MDIO bus. + This is currently implemented in net/mdio-mux-uclass.c + Look in include/miiphy.h for details. + +config DM_DSA + bool "Enable Driver Model for DSA switches" + depends on DM_ETH && DM_MDIO + depends on PHY_FIXED + help + Enable driver model for DSA switches + + Adds UCLASS_DSA class supporting switches that follow the Distributed + Switch Architecture (DSA). These switches rely on the presence of a + management switch port connected to an Ethernet controller capable of + receiving frames from the switch. This host Ethernet controller is + called the "master" Ethernet interface in DSA terminology. + This is currently implemented in net/dsa-uclass.c, refer to + include/net/dsa.h for API details. + +config MDIO_SANDBOX + depends on DM_MDIO && SANDBOX + default y + bool "Sandbox: Mocked MDIO driver" + help + This driver implements dummy read/write/reset MDIO functions mimicking + a bus with a single PHY. + + This driver is used in for testing in test/dm/mdio.c + +config MDIO_MUX_SANDBOX + depends on DM_MDIO_MUX && MDIO_SANDBOX + default y + bool "Sandbox: Mocked MDIO-MUX driver" + help + This driver implements dummy select/deselect ops mimicking a MUX on + the MDIO bux. It uses mdio_sandbox driver as parent MDIO. + + This driver is used for testing in test/dm/mdio.c + +config DM_ETH_PHY + bool "Enable Driver Model for Ethernet Generic PHY drivers" + depends on DM + help + Enable driver model for Ethernet Generic PHY . + +config DSA_SANDBOX + depends on DM_DSA && SANDBOX + default y + bool "Sandbox: Mocked DSA driver" + help + This driver implements a dummy DSA switch connected to a dummy sandbox + Ethernet device used as DSA master, to test DSA class code, including + exported DSA API and datapath processing of Ethernet traffic. + +menuconfig NETDEVICES + bool "Network device support" + depends on NET + default y if DM_ETH + help + You must select Y to enable any network device support + Generally if you have any networking support this is a given + + If unsure, say Y + +if NETDEVICES + +config PHY_GIGE + bool "Enable GbE PHY status parsing and configuration" + help + Enables support for parsing the status output and for + configuring GbE PHYs (affects the inner workings of some + commands and miiphyutil.c). + +config AG7XXX + bool "Atheros AG7xxx Ethernet MAC support" + depends on DM_ETH && ARCH_ATH79 + select PHYLIB + help + This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is + present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. + + +config ALTERA_TSE + bool "Altera Triple-Speed Ethernet MAC support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. + Please find details on the "Triple-Speed Ethernet MegaCore Function + Resource Center" of Altera. + +config BCM_SF2_ETH + bool "Broadcom SF2 (Starfighter2) Ethernet support" + select PHYLIB + help + This is an abstract framework which provides a generic interface + to MAC and DMA management for multiple Broadcom SoCs such as + Cygnus, NSP and bcm28155_ap platforms. + +config BCM_SF2_ETH_DEFAULT_PORT + int "Broadcom SF2 (Starfighter2) Ethernet default port number" + depends on BCM_SF2_ETH + default 0 + help + Default port number for the Starfighter2 ethernet driver. + +config BCM_SF2_ETH_GMAC + bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support" + depends on BCM_SF2_ETH + help + This flag enables the ethernet support for Broadcom platforms with + GMAC such as Cygnus. This driver is based on the framework provided + by the BCM_SF2_ETH driver. + Say Y to any bcmcygnus based platforms. + +config BCM6348_ETH + bool "BCM6348 EMAC support" + depends on DM_ETH && ARCH_BMIPS + select DMA + select DMA_CHANNELS + select MII + select PHYLIB + help + This driver supports the BCM6348 Ethernet MAC. + +config BCM6368_ETH + bool "BCM6368 EMAC support" + depends on DM_ETH && ARCH_BMIPS + select DMA + select MII + help + This driver supports the BCM6368 Ethernet MAC. + +config BCMGENET + bool "BCMGENET V5 support" + depends on DM_ETH + select PHYLIB + help + This driver supports the BCMGENET Ethernet MAC. + +config CORTINA_NI_ENET + bool "Cortina-Access Ethernet driver" + depends on DM_ETH && CORTINA_PLATFORM + help + This driver supports the Cortina-Access Ethernet MAC for + all supported CAxxxx SoCs. + +config CALXEDA_XGMAC + bool "Calxeda XGMAC support" + depends on DM_ETH + help + This driver supports the XGMAC in Calxeda Highbank and Midway + machines. + +config DWC_ETH_QOS + bool "Synopsys DWC Ethernet QOS device support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Synopsys Designware Ethernet QOS (Quality + Of Service) IP block. The IP supports many options for bus type, + clocking/reset structure, and feature list. + +config DWC_ETH_QOS_IMX + bool "Synopsys DWC Ethernet QOS device support for IMX" + depends on DWC_ETH_QOS + help + The Synopsys Designware Ethernet QOS IP block with the specific + configuration used in IMX soc. + +config DWC_ETH_QOS_STM32 + bool "Synopsys DWC Ethernet QOS device support for STM32" + depends on DWC_ETH_QOS + default y if ARCH_STM32MP + help + The Synopsys Designware Ethernet QOS IP block with the specific + configuration used in STM32MP soc. + +config DWC_ETH_QOS_TEGRA186 + bool "Synopsys DWC Ethernet QOS device support for TEGRA186" + depends on DWC_ETH_QOS + default y if TEGRA186 + help + The Synopsys Designware Ethernet QOS IP block with specific + configuration used in NVIDIA's Tegra186 chip. + +config E1000 + bool "Intel PRO/1000 Gigabit Ethernet support" + depends on (DM_ETH && DM_PCI) || !DM_ETH + help + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + +config E1000_SPI_GENERIC + bool "Allow access to the Intel 8257x SPI bus" + depends on E1000 + help + Allow generic access to the SPI bus on the Intel 8257x, for + example with the "sspi" command. + +config E1000_SPI + bool "Enable SPI bus utility code" + depends on E1000 + help + Utility code for direct access to the SPI bus on Intel 8257x. + This does not do anything useful unless you set at least one + of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. + +config CMD_E1000 + bool "Enable the e1000 command" + depends on E1000 + help + This enables the 'e1000' management command for E1000 devices. When + used on devices with SPI support you can reprogram the EEPROM from + U-Boot. + +config EEPRO100 + bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support" + help + This driver supports Intel(R) PRO/100 82557/82559/82559ER fast + ethernet family of adapters. + +config ETH_SANDBOX + depends on DM_ETH && SANDBOX + default y + bool "Sandbox: Mocked Ethernet driver" + help + This driver simply responds with fake ARP replies and ping + replies that are used to verify network stack functionality + + This driver is particularly useful in the test/dm/eth.c tests + +config ETH_SANDBOX_RAW + depends on DM_ETH && SANDBOX + default y + bool "Sandbox: Bridge to Linux Raw Sockets" + help + This driver is a bridge from the bottom of the network stack + in U-Boot to the RAW AF_PACKET API in Linux. This allows real + network traffic to be tested from within sandbox. See + doc/arch/index.rst for more details. + +config ETH_DESIGNWARE + bool "Synopsys Designware Ethernet MAC" + select PHYLIB + imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA + help + This MAC is present in SoCs from various vendors. It supports + 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to + provide the PHY (physical media interface). + +config ETH_DESIGNWARE_MESON8B + bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC" + depends on DM_ETH + select ETH_DESIGNWARE + help + This provides glue layer to use Synopsys Designware Ethernet MAC + present on the Amlogic Meson8b, GX, AXG & G12A SoCs. + +config ETH_DESIGNWARE_SOCFPGA + select REGMAP + select SYSCON + bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC" + depends on DM_ETH && ETH_DESIGNWARE + help + The Altera SoCFPGA requires additional configuration of the + Altera system manager to correctly interface with the PHY. + This code handles those SoC specifics. + +config ETH_DESIGNWARE_S700 + bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC" + depends on DM_ETH && ETH_DESIGNWARE + help + This provides glue layer to use Synopsys Designware Ethernet MAC + present on Actions S700 SoC. + +config ETHOC + bool "OpenCores 10/100 Mbps Ethernet MAC" + help + This MAC is present in OpenRISC and Xtensa XTFPGA boards. + +config FEC_MXC_SHARE_MDIO + bool "Share the MDIO bus for FEC controller" + depends on FEC_MXC + +config FEC_MXC_MDIO_BASE + hex "MDIO base address for the FEC controller" + depends on FEC_MXC_SHARE_MDIO + help + This specifies the MDIO registers base address. It is used when + two FEC controllers share MDIO bus. + +config FEC_MXC + bool "FEC Ethernet controller" + depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610 + help + This driver supports the 10/100 Fast Ethernet controller for + NXP i.MX processors. + +config FMAN_ENET + bool "Freescale FMan ethernet support" + depends on ARM || PPC + help + This driver support the Freescale FMan Ethernet controller + +config FTMAC100 + bool "Ftmac100 Ethernet Support" + help + This MAC is present in Andestech SoCs. + +config FTGMAC100 + bool "Ftgmac100 Ethernet Support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Faraday's FTGMAC100 Gigabit SoC + Ethernet controller that can be found on Aspeed SoCs (which + include NCSI). + + It is fully compliant with IEEE 802.3 specification for + 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 + Mbps Ethernet and includes Reduced Media Independent + Interface (RMII) and Reduced Gigabit Media Independent + Interface (RGMII) interfaces. It adopts an AHB bus interface + and integrates a link list DMA engine with direct M-Bus + accesses for transmitting and receiving packets. It has + independent TX/RX fifos, supports half and full duplex (1000 + Mbps mode only supports full duplex), flow control for full + duplex and backpressure for half duplex. + + The FTGMAC100 also implements IP, TCP, UDP checksum offloads + and supports IEEE 802.1Q VLAN tag insertion and removal. It + offers high-priority transmit queue for QoS and CoS + applications. + + +config MCFFEC + bool "ColdFire Ethernet Support" + depends on DM_ETH + select PHYLIB + help + This driver supports the network interface units in the + ColdFire family. + +config FSLDMAFEC + bool "ColdFire DMA Ethernet Support" + depends on DM_ETH + select PHYLIB + help + This driver supports the network interface units in the + ColdFire family. + +config KS8851_MLL + bool "Microchip KS8851-MLL controller driver" + help + The Microchip KS8851 parallel bus external ethernet interface chip. + +if KS8851_MLL +if !DM_ETH +config KS8851_MLL_BASEADDR + hex "Microchip KS8851-MLL Base Address" + help + Define this to hold the physical address of the device (I/O space) +endif #DM_ETH +endif #KS8851_MLL + +config MVGBE + bool "Marvell Orion5x/Kirkwood network interface support" + depends on ARCH_KIRKWOOD || ARCH_ORION5X + select PHYLIB if DM_ETH + help + This driver supports the network interface units in the + Marvell Orion5x and Kirkwood SoCs + +config MVNETA + bool "Marvell Armada XP/385/3700 network interface support" + depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 + select PHYLIB + help + This driver supports the network interface units in the + Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs + +config MVPP2 + bool "Marvell Armada 375/7K/8K network interface support" + depends on ARMADA_375 || ARMADA_8K + select PHYLIB + select MVMDIO + select DM_MDIO + help + This driver supports the network interface units in the + Marvell ARMADA 375, 7K and 8K SoCs. + +config MACB + bool "Cadence MACB/GEM Ethernet Interface" + depends on DM_ETH + select PHYLIB + help + The Cadence MACB ethernet interface is found on many Atmel + AT91 and SAMA5 parts. This driver also supports the Cadence + GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. + Say Y to include support for the MACB/GEM chip. + +config MACB_ZYNQ + bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq" + depends on MACB + help + The Cadence MACB ethernet interface was used on Zynq platform. + Say Y to enable support for the MACB/GEM in Zynq chip. + +config MT7620_ETH + bool "MediaTek MT7620 Ethernet Interface" + depends on SOC_MT7620 + select PHYLIB + select DM_RESET + select DM_GPIO + select CLK + help + The MediaTek MT7620 ethernet interface is used on MT7620 based + boards. It has a built-in switch with two configurable ports which + can connect to external PHY/MACs. + +config MT7628_ETH + bool "MediaTek MT7628 Ethernet Interface" + depends on SOC_MT7628 + select PHYLIB + help + The MediaTek MT7628 ethernet interface is used on MT7628 and + MT7688 based boards. + +config NET_OCTEONTX + bool "OcteonTX Ethernet support" + depends on ARCH_OCTEONTX + depends on PCI_SRIOV + help + You must select Y to enable network device support for + OcteonTX SoCs. If unsure, say n + +config NET_OCTEONTX2 + bool "OcteonTX2 Ethernet support" + depends on ARCH_OCTEONTX2 + select OCTEONTX2_CGX_INTF + help + You must select Y to enable network device support for + OcteonTX2 SoCs. If unsure, say n + +config OCTEONTX_SMI + bool "OcteonTX SMI Device support" + depends on ARCH_OCTEONTX || ARCH_OCTEONTX2 + help + You must select Y to enable SMI controller support for + OcteonTX or OcteonTX2 SoCs. If unsure, say n + +config OCTEONTX2_CGX_INTF + bool "OcteonTX2 CGX ATF interface support" + depends on ARCH_OCTEONTX2 + default y if ARCH_OCTEONTX2 + help + You must select Y to enable CGX ATF interface support for + OcteonTX2 SoCs. If unsure, say n + +config PCH_GBE + bool "Intel Platform Controller Hub EG20T GMAC driver" + depends on DM_ETH && DM_PCI + select PHYLIB + help + This MAC is present in Intel Platform Controller Hub EG20T. It + supports 10/100/1000 Mbps operation. + +config RGMII + bool "Enable RGMII" + help + Enable the support of the Reduced Gigabit Media-Independent + Interface (RGMII). + +config MII + bool "Enable MII" + help + Enable support of the Media-Independent Interface (MII) + +config PCNET + bool "AMD PCnet series Ethernet controller driver" + help + This driver supports AMD PCnet series fast ethernet family of + PCI chipsets/adapters. + +source "drivers/net/qe/Kconfig" + +config RTL8139 + bool "Realtek 8139 series Ethernet controller driver" + help + This driver supports Realtek 8139 series fast ethernet family of + PCI chipsets/adapters. + +config RTL8169 + bool "Realtek 8169 series Ethernet controller driver" + help + This driver supports Realtek 8169 series gigabit ethernet family of + PCI/PCIe chipsets/adapters. + +config SMC911X + bool "SMSC LAN911x and LAN921x controller driver" + +if SMC911X + +if !DM_ETH +config SMC911X_BASE + hex "SMC911X Base Address" + help + Define this to hold the physical address + of the device (I/O space) +endif #DM_ETH + +choice + prompt "SMC911X bus width" + default SMC911X_16_BIT + +config SMC911X_32_BIT + bool "Enable 32-bit interface" + +config SMC911X_16_BIT + bool "Enable 16-bit interface" + help + Define this if data bus is 16 bits. If your processor + automatically converts one 32 bit word to two 16 bit + words you may also try CONFIG_SMC911X_32_BIT. + +endchoice +endif #SMC911X + +config SUN7I_GMAC + bool "Enable Allwinner GMAC Ethernet support" + help + Enable the support for Sun7i GMAC Ethernet controller + +config SUN7I_GMAC_FORCE_TXERR + bool "Force PA17 as gmac function" + depends on SUN7I_GMAC + help + Some ethernet phys needs TXERR control. Since the GMAC + doesn't have such signal, setting PA17 as GMAC function + makes the pin output low, which enables data transmission. + +config SUN4I_EMAC + bool "Allwinner Sun4i Ethernet MAC support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Allwinner based SUN4I Ethernet MAC. + +config SUN8I_EMAC + bool "Allwinner Sun8i Ethernet MAC support" + depends on DM_ETH + select PHYLIB + select PHY_GIGE + help + This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. + It can be found in H3/A64/A83T based SoCs and compatible with both + External and Internal PHYs. + +config SH_ETHER + bool "Renesas SH Ethernet MAC" + select PHYLIB + help + This driver supports the Ethernet for Renesas SH and ARM SoCs. + +source "drivers/net/ti/Kconfig" + +config TULIP + bool "DEC Tulip DC2114x Ethernet support" + depends on (DM_ETH && DM_PCI) || !DM_ETH + help + This driver supports DEC DC2114x Fast ethernet chips. + +config XILINX_AXIEMAC + depends on DM_ETH + select PHYLIB + select MII + bool "Xilinx AXI Ethernet" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + +config XILINX_EMACLITE + depends on DM_ETH + select PHYLIB + select MII + bool "Xilinx Ethernetlite" + help + This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. + +config ZYNQ_GEM + depends on DM_ETH + select PHYLIB + bool "Xilinx Ethernet GEM" + help + This MAC is present in Xilinx Zynq and ZynqMP SoCs. + +config PIC32_ETH + bool "Microchip PIC32 Ethernet Support" + depends on DM_ETH && MACH_PIC32 + select PHYLIB + help + This driver implements 10/100 Mbps Ethernet and MAC layer for + Microchip PIC32 microcontrollers. + +config GMAC_ROCKCHIP + bool "Rockchip Synopsys Designware Ethernet MAC" + depends on DM_ETH && ETH_DESIGNWARE + help + This driver provides Rockchip SoCs network support based on the + Synopsys Designware driver. + +config RENESAS_RAVB + bool "Renesas Ethernet AVB MAC" + depends on DM_ETH && RCAR_GEN3 + select PHYLIB + help + This driver implements support for the Ethernet AVB block in + Renesas M3 and H3 SoCs. + +config MPC8XX_FEC + bool "Fast Ethernet Controller on MPC8XX" + depends on MPC8xx + select MII + help + This driver implements support for the Fast Ethernet Controller + on MPC8XX + +config SNI_AVE + bool "Socionext AVE Ethernet support" + depends on DM_ETH && ARCH_UNIPHIER + select PHYLIB + select SYSCON + select REGMAP + help + This driver implements support for the Socionext AVE Ethernet + controller, as found on the Socionext UniPhier family. + +config SNI_NETSEC + bool "Socionext NETSEC Ethernet support" + depends on DM_ETH && SYNQUACER_SPI + select PHYLIB + help + This driver implements support for the Socionext SynQuacer NETSEC + ethernet controller, as found on the Socionext SynQuacer family. + +source "drivers/net/mscc_eswitch/Kconfig" + +config ETHER_ON_FEC1 + bool "FEC1" + depends on MPC8XX_FEC + default y + +config FEC1_PHY + int "FEC1 PHY" + depends on ETHER_ON_FEC1 + default -1 + help + Define to the hardcoded PHY address which corresponds + to the given FEC; i. e. + #define CONFIG_FEC1_PHY 4 + means that the PHY with address 4 is connected to FEC1 + + When set to -1, means to probe for first available. + +config PHY_NORXERR + bool "PHY_NORXERR" + depends on ETHER_ON_FEC1 + default n + help + The PHY does not have a RXERR line (RMII only). + (so program the FEC to ignore it). + +config ETHER_ON_FEC2 + bool "FEC2" + depends on MPC8XX_FEC && MPC885 + default y + +config FEC2_PHY + int "FEC2 PHY" + depends on ETHER_ON_FEC2 + default -1 + help + Define to the hardcoded PHY address which corresponds + to the given FEC; i. e. + #define CONFIG_FEC1_PHY 4 + means that the PHY with address 4 is connected to FEC1 + + When set to -1, means to probe for first available. + +config FEC2_PHY_NORXERR + bool "PHY_NORXERR" + depends on ETHER_ON_FEC2 + default n + help + The PHY does not have a RXERR line (RMII only). + (so program the FEC to ignore it). + +config SYS_DPAA_QBMAN + bool "Device tree fixup for QBMan on freescale SOCs" + depends on (ARM || PPC) && !SPL_BUILD + default y if ARCH_B4860 || \ + ARCH_B4420 || \ + ARCH_P1023 || \ + ARCH_P2041 || \ + ARCH_T1023 || \ + ARCH_T1024 || \ + ARCH_T1040 || \ + ARCH_T1042 || \ + ARCH_T2080 || \ + ARCH_T4240 || \ + ARCH_T4160 || \ + ARCH_P4080 || \ + ARCH_P3041 || \ + ARCH_P5040 || \ + ARCH_LS1043A || \ + ARCH_LS1046A + help + QBman fixups to allow deep sleep in DPAA 1 SOCs + +config TSEC_ENET + select PHYLIB + bool "Enable Three-Speed Ethernet Controller" + help + This driver implements support for the (Enhanced) Three-Speed + Ethernet Controller found on Freescale SoCs. + +config MEDIATEK_ETH + bool "MediaTek Ethernet GMAC Driver" + depends on DM_ETH + select PHYLIB + select DM_GPIO + select DM_RESET + help + This Driver support MediaTek Ethernet GMAC + Say Y to enable support for the MediaTek Ethernet GMAC. + +config HIGMACV300_ETH + bool "HiSilicon Gigabit Ethernet Controller" + depends on DM_ETH + select DM_RESET + select PHYLIB + help + This driver supports HIGMACV300 Ethernet controller found on + HiSilicon SoCs. + +config FSL_ENETC + bool "NXP ENETC Ethernet controller" + depends on DM_PCI && DM_ETH && DM_MDIO + help + This driver supports the NXP ENETC Ethernet controller found on some + of the NXP SoCs. + +config MDIO_MUX_I2CREG + bool "MDIO MUX accessed as a register over I2C" + depends on DM_MDIO_MUX && DM_I2C + help + This driver is used for MDIO muxes driven by writing to a register of + an I2C chip. The board it was developed for uses a mux controlled by + on-board FPGA which in turn is accessed as a chip over I2C. + +config MDIO_IPQ4019 + bool "Qualcomm IPQ4019 MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO interface found in Qualcomm + IPQ40xx series Soc-s. + +config MVMDIO + bool "Marvell MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO interface found in the network + interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, + Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP). + + This driver is used by the MVPP2 and MVNETA drivers. + +config FSL_LS_MDIO + bool "NXP Layerscape MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and + on the mEMAC (which supports both Clauses 22 and 45). + +config MDIO_MUX_MMIOREG + bool "MDIO MUX accessed as a MMIO register access" + depends on DM_MDIO_MUX + help + This driver is used for MDIO muxes driven by writing to a register in + the MMIO physical memory. + +config MDIO_MUX_MESON_G12A + bool "MDIO MUX for Amlogic Meson G12A SoCs" + depends on DM_MDIO_MUX + help + This driver is used for the MDIO mux found on the Amlogic G12A & compatible + SoCs. + +endif # NETDEVICES |