1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
|
/*
* Video On Demand Samples
*
* Copyright (C) 2015 Microchip Technology Germany II GmbH & Co. KG
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* You may also obtain this software under a propriety license from Microchip.
* Please contact Microchip for further information.
*
*/
/*----------------------------------------------------------*/
/*! \file
* \brief This file generates the start page of the document you are currently reading.
*/
/*----------------------------------------------------------*/
#ifndef DOXYGEN_START_PAGE_H
#define DOXYGEN_START_PAGE_H
/*----------------------------------------------------------*/
/*! \mainpage
*
* \section intro_sec Introduction
*
* The client device may have MLB attached INIC OS81110 or USB attached INIC OS81118. \n
* All components where written for and tested for the FreeScale i.MX6q platform. \n
*
* \subsection step1 Step 1: Execute Server Application
*
* Login to the server target device. \n
* Switch to the directory, where you have copied all outputs of the previous steps. \n
* Make sure, that all devices are up and running and the MOST bus is well connected. \n
* Start the application. \n
* Enter:
* \code sudo ./VideoOnDemand config.xml \endcode
*
* After a while, you should see the main menu, with available connections: \n
* Display Output: \n
* \code
* Index | MOST | MAC-ADDRESS | DEV | INST | ID | Type | BW | Dir | Multiplex | Con-Label | Buffer | State |DEVICE-NAME
* ------|------|-------------------|------|------|----|-------|-----|-----|-----------|-----------|--------|--------|-------------
* 00 | 00 | 02-00-00-00-00-01 | 310 | 00 | 01 | ISOC | 088 | TX | Yes | 077 | 8192 | XXX | /dev/mdev0-ep0a
* 01 | 00 | 02-00-00-00-00-01 | 310 | 00 | 02 | ISOC | 088 | TX | Yes | 0CF | 8192 | XXX | /dev/mdev0-ep0b
* 02 | 00 | 02-00-00-00-00-01 | 310 | 00 | 03 | ISOC | 088 | TX | Yes | 127 | 8192 | XXX | /dev/mdev0-ep0c
* 03 | 00 | 02-00-00-00-00-01 | 310 | 00 | 04 | ISOC | 088 | TX | Yes | 17F | 8192 | XXX | /dev/mdev0-ep0d
* 04 | 00 | 02-00-00-01-01-01 | 330 | 00 | 01 | ISOC | 088 | RX | No | 077 | None | XXX |
* 05 | 00 | 02-00-00-02-01-02 | 330 | 01 | 01 | ISOC | 088 | RX | No | 0CF | None | XXX |
* ------|------|-------------------|------|------|----|-------|-----|-----|-----------|-----------|--------|--------|-------------
* \endcode
*
* At this point you should be able to connect with either the native C++ application or the Android HMI app.<br/>
* Make sure, you set the IP address correct on all devices.
*
* - In order to check if the streaming is correctly working, enable the the statistics printing.
* - Enter "p" and press Enter key.
*
* Display Output:
* \code
* ==============Statistic Start==============
* Device:/dev/mdev0-ep0a, Stream 02-00-00-00-00-01, sent:0 (kBit/s), stuffed:28700 (kBit/s), read:0 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Device:/dev/mdev0-ep0b, Stream 02-00-00-00-00-01, sent:0 (kBit/s), stuffed:28730 (kBit/s), read:0 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Device:/dev/mdev0-ep0c, Stream 02-00-00-00-00-01, sent:0 (kBit/s), stuffed:33627 (kBit/s), read:0 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Device:/dev/mdev0-ep0d, Stream 02-00-00-00-00-01, sent:0 (kBit/s), stuffed:33627 (kBit/s), read:0 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Device:/dev/mdev0-ep0a, Stream 02-00-00-01-01-01, sent:4927 (kBit/s), stuffed:0 (kBit/s), read:5197 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Device:/dev/mdev0-ep0b, Stream 02-00-00-02-01-02, sent:4897 (kBit/s), stuffed:0 (kBit/s), read:5005 (kBit/s), PCR-error:0, Buf Ovfl-error:0, Buf Unfl-error:0, TS-error:0
* Overall sent performance of all streams: 134511 (kBit/s)
* ===============Statistic End===============
* \endcode
* - If everything is okay, the sent and read values are not zero. They may be different, as the Transport Stream file usually contains
* stuffing and control informations, which will not be sent over the MOST network.
* - The error values must be zero.
*
*
* \subsection step2 Step 2: Retrieve the isochronous stream on non Android clients
*
* If you are not using the Android App, login in to the client devices.\n
* \note Make sure you performed step
* - Step 1: Load Linux driver on target
* - Step 2: Enable Ethernet communication on MOST
* - Step 3: Execute the native C++ VideoOnDemand Client sample application
*
*
*
* In order to dump the received data to disk, enter:
* \code
* dd if=/dev/mdev0-ep0a of=myCapturedVideo.ts bs=7520
* \endcode
* \note Adapt the name of the character device, as listed by the VideoOnDemand sample application.
*
* You can also use the dev2udp helper tool, which is stored in the SlimCamera example folder.
*/
/*----------------------------------------------------------*/
#endif //DOXYGEN_START_PAGE_H
|
