test target: launch user sshd for opening termflounder_5.99.6flounder_5.99.5flounder/5.99.6flounder/5.99.55.99.65.99.5

- fixtures for user ssh server (authorized_keys, ssh, sshd_config,
ssh_host_rsa_key, ssh.pub)
- exec following cmd
$ /usr/bin/sshd
    - D
    -f sshd_config
    -h ssh_host_rsa_key
    -o AuthorizedKeysFile=authorized_keys
    -p port
- uncomment former terminal tests for open/close

Change-Id: If1765c4860ef3a95f7a92f1f9652427828b98083
Signed-off-by: Clément Bénier <clement.benier@iot.bzh>

1 files changed, 116 insertions, 0 deletions

diff --git a/test/fixtures/ssh/sshd_config b/test/fixtures/ssh/sshd_config
new file mode 100644
index 0000000..cb8bff9
--- /dev/null
+++ b/test/fixtures/ssh/sshd_config
@@ -0,0 +1,116 @@
+#	$OpenBSD: sshd_config,v 1.102 2018/02/16 02:32:40 djm Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22222
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /tmp/sshtest/ssh_host_rsa_key
+#HostKey /tmp/sshtest/ssh_host_ecdsa_key
+#HostKey /tmp/sshtest/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+StrictModes no
+#MaxAuthTries 6
+#MaxSessions 10
+
+PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile	/tmp/sshtest/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+IgnoreUserKnownHosts yes
+# Don't read the user's ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication yes
+PermitEmptyPasswords yes
+
+# Change to no to disable s/key passwords
+ChallengeResponseAuthentication no
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no # pam does that
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+PermitUserEnvironment yes
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/ssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server