diff options
Diffstat (limited to 'systemservice/interface_unified/library/include/system_service/ss_system_process.h')
-rwxr-xr-x | systemservice/interface_unified/library/include/system_service/ss_system_process.h | 1118 |
1 files changed, 1118 insertions, 0 deletions
diff --git a/systemservice/interface_unified/library/include/system_service/ss_system_process.h b/systemservice/interface_unified/library/include/system_service/ss_system_process.h new file mode 100755 index 0000000..a4ae743 --- /dev/null +++ b/systemservice/interface_unified/library/include/system_service/ss_system_process.h @@ -0,0 +1,1118 @@ +/* + * @copyright Copyright (c) 2016-2020 TOYOTA MOTOR CORPORATION. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/////////////////////////////////////////////////////////////////////////////// +/// \ingroup tag_SystemServicesIf +/// \brief This file supports the System Manager OS process abstraction. +/// +/////////////////////////////////////////////////////////////////////////////// +/** + * @file ss_system_process.h + */ +/** @addtogroup BaseSystem + * @{ + */ +/** @addtogroup system_service + * @ingroup BaseSystem + * @{ + */ +/** @addtogroup interface_unified + * @ingroup system_service + * @{ + */ +#ifndef __Process_H__ // NOLINT (build/header_guard) +#define __Process_H__ + +#include <spawn.h> +#include <native_service/frameworkunified_types.h> +#include <native_service/cl_process.h> +#include <system_service/ss_system_types.h> +#include <signal.h> +#include <vector> +#include <string> +#include <map> + +const long lProcess_VALIDATION_VALUE = 2198645; // NOLINT (runtime/int) +// Used to define a unique value that represents this class. +// This value is stored in the object when the object is created, +// and cleared when the object is destroyed. + +const int iProcess_DEFAULT_PROCESS_PRIORITY = 10; +// This is the default process priority that all new processes will use. + +const int iProcess_MAXIMUM_PROCESS_PRIORITY = 60; +// This is the maximum priority a process can have + +const long iProcess_DEFAULT_PROCESS_FLAGS = POSIX_SPAWN_SETSCHEDULER // NOLINT (runtime/int) + | POSIX_SPAWN_SETSCHEDPARAM; + +// This flag field is a bit wise OR of spawning options to use when a process +// is created. + +const int iProcess_MAXIMUM_NUMBER_OF_PROCESS_ARGUMENTS = 25; +// This is the maximum number of command line (i.e. argv[]) arguments we can +// send to a process. This includes; exectuable file name + process arguments + NULL + +const int iProcess_MAXIMUM_PROCESS_NAME_LENGTH = 32; +// This is the maximum number of characters that a process name can be in bytes. + +class Process; + +typedef std::map<SS_String, Process *> ProcessMap; + +/** + * @class TimerCtrl + * \~english @brief OS process + * \~english @par Brief Introduction + * This class is the System Manager OS process abstraction. + * + */ +class Process { + public: + enum eProcessLoadMode { + WAIT, // The invoked program is loaded into available memory, is executed, + // and then the original program resumes execution. + NOWAIT, // Causes the current program to execute concurrently with the new child process. + }; + + enum eProcessSchedulingPolicy { + FIFO, // A fixed priority scheduler in which the highest ready process runs until it + // blocks or is preempted by a higher priority process. + ROUND_ROBIN, // The same as FIFO, except processes at the same priority level time-slice. + OTHER // A general time sharing scheduler in which a process decays in priority if it + // consumes too much processor before blocking. It reverts to its default priority + // when it blocks. Should it fail to run over a 2 second period and it has decayed + // then it's boosted one priority level up to a maximum of its default priority. + }; + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup Process + /// \~english @par Summary + /// - Default Constructor, called when the class is instantiated. + /// \~english @param [in] - cpu_assign + /// - Assignment information of CPU. + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - initialize all var + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - initialize all var in class as default value + /// \~english @see ~Process + //////////////////////////////////////////////////////////////////////////////////// + Process(int cpu_assign = 0x0); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup Process + /// \~english @par Summary + /// - Copy Constructor + /// \~english @param [in] - p_rhs_i + /// - Process - Reference to a Process that you want to copy. + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Used to create an object and copy another object to the new object. + /// \~english @see ~Process + //////////////////////////////////////////////////////////////////////////////////// + Process(const Process& p_rhs_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup ~Process + /// \~english @par Summary + /// - Destructor function + /// \~english @param None + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - set m_lValidationTag with 0 + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Destructor, called when the object is destroyed.\n + /// set m_lValidationTag with 0 and kill process. + /// \~english @see Process + //////////////////////////////////////////////////////////////////////////////////// + virtual ~Process(); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup operator= + /// \~english @par Summary + /// - Assignment Operator + /// \~english @param [in] + /// \~english @retval Process - New Process object + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Assignment Operator, called when one object is assigned to another object. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + Process& operator=(const Process& p_rhs_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup GetProcessId + /// \~english @par Summary + /// - get process id + /// \~english @param None + /// \~english @retval process pid - the process pid of the process running. + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - This method will return to the caller the PosixBasedOS001 Specific Process ID. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + int const GetProcessId(void) { + return static_cast<int>(m_tProcessId); + } + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetCallingArgumentList + /// \~english @par Summary + /// - This method will set the calling argument list that this object represents + /// \~english @param [in] p_pcArgv_i + /// - const char *[] - Pointer to array of null terminated parameter list. + /// \~english @param [in] p_iArgc_i + /// - const int - - Number of arguments in the array passed. + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - put the new arguments into m_strlstArgv + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Set the executable filename first. This is always the 1st argument + /// - in the argument list. Then set the argument list for the process + /// - which is held in m_strlstArgv. + /// - First make sure that the argument list is empty. + /// - Once empty, put the new arguments into the list + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetCallingArgumentList(const char *p_pcArgv_i[], const int p_iArgc_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetCallingArgumentList + /// \~english @par Summary + /// - This method will set the calling argument list that this object represents. + /// \~english @param [in] p_strlstParameters_i + /// - const StringList& - String list of arguments that will be used to start. + /// \~english @retval None. + /// \~english @par Preconditions + /// - no preconditions. + /// \~english @par Change of the internal state + /// - set m_strlstArgv with p_strlstParameters_i. + /// \~english @par Causes of failures + /// - None. + /// \~english @par Classification + /// - Public. + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - if p_strlstParameters_i is not empty,then clear m_strlstArgv \n + /// - and set m_strlstArgv with p_strlstParameters_i. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetCallingArgumentList(const StringList& p_strlstParameters_i); + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup GetExecutableFileName +/// \~english @par Summary +/// - Get executable file name +/// \~english @param None +/// \~english @retval Pointer +/// - Points to SS_String object that holds the path and executable file name for this process +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will return a pointer to the executable filename that this object represents +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + const char * const GetExecutableFileName() { + return m_strFile.c_str(); + } + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup GetProcessReturnCode + /// \~english @par Summary + /// - This function will return the processes exit/return code. + /// \~english @param None + /// \~english @retval process exit code - Code for the last process to execute + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - set m_iReturnCode with WEXITSTATUS(iProcessReturn) + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - This function will return the processes exit/return code.\n + /// This is not the value of ERRNO as returned by GetLastPosixBasedOS001ErrorCode(). + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + int GetProcessReturnCode(void); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetSchedulingPolicy + /// \~english @par Summary + /// - This method will change the scheduling policy for the process this object represents. + /// \~english @param [in] p_eSchedulingPolicy_i + /// - const eProcessSchedulingPolicy - Scheduling Policy for this process + /// \~english @par + /// - eProcessSchedulingPolicy + /// \~english @code + /// - enum eProcessSchedulingPolicy { + /// FIFO, A fixed priority scheduler in which the highest ready process runs until it\n + /// blocks or is preempted by a higher priority process. + /// ROUND_ROBIN, The same as FIFO, except processes at the same priority level time-slice. + /// OTHER A general time sharing scheduler in which a process decays in priority if it\n + /// consumes too much processor before blocking. It reverts to its default priority\n + /// when it blocks. Should it fail to run over a 2 second period and it has decayed\n + /// then it's boosted one priority level up to a maximum of its default priority. + /// }; + /// @endcode + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// -If the result of function is not 0,then set m_iErrorCode with errno + /// - else set m_iErrorCode with 0. + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Attempt to change the scheduling policy for the process that this object + /// represents. If the change fails, restore the previous settings. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetSchedulingPolicy( + const eProcessSchedulingPolicy p_eSchedulingPolicy_i); + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup GetSchedulingPolicy +/// \~english @par Summary +/// - Get currently configured scheduling policy +/// \~english @param None +/// \~english @retval FIFO - A fixed priority scheduler in which the highest ready process runs until it\n +/// blocks or is preempted by a higher priority process. +/// \~english @retval ROUND_ROBIN - The same as FIFO, except processes at the same priority level time-slice. +/// \~english @retval OTHER - A general time sharing scheduler in which a process decays in priority if it\n +/// consumes too much processor before blocking. It reverts to its default priority\n +/// when it blocks. Should it fail to run over a 2 second period and it has decayed\n +/// then it's boosted one priority level up to a maximum of its default priority. +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - If the result of calling function sched_getscheduler(m_tProcessId) is -1 +/// then set m_iErrorCode with errno +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will return to the caller the currently configured process scheduling policy. +/// If the result of calling function sched_getscheduler(m_tProcessId) is -1, +/// then return ROUND_ROBIN. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + eProcessSchedulingPolicy const GetSchedulingPolicy(void); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetPriority + /// \~english @par Summary + /// - This method will change the priority for the process this object represents. + /// \~english @param [in] p_iPriority_i + /// - int - Priority of the process + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - If the result of function sched_setparam(m_tProcessId, &cur_sch_params)\n + /// is -1,then set m_iErrorCode with errno, else set m_iErrorCode with 0. + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Using p_iPriority_i to change the priority for the process\n + /// this object represents,if the result of function \n + /// sched_setparam(m_tProcessId, &cur_sch_params) is -1 + /// m_iErrorCode will be seted with errno,else be seted with 0 + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetPriority(const int p_iPriority_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetPriority Notice:Can't find the body of this function + /// \~english @par Summary + /// - This method will change the priority for the specified process ID. + /// \~english @param [in] p_iPid_i + /// - pid_t - PID of the process to change the priority + /// \~english @param [in] p_iPriority_i + /// - int - Priority of the process + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - + /// \~english @par Causes of failures + /// - + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// -none + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetPriority(const pid_t p_iPid_i, const int p_iPriority_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup IncreasePriorityByOne + /// \~english @par Summary + /// - This method will increase the priority for the process this\n + /// object represents by one. + /// \~english @param None + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Retrieve the current priority of the process. Check to see if already at max.\n + /// If so just return. Otherwise increase by one and set the priority... + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void IncreasePriorityByOne(void); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup DecreasePriorityByOne + /// \~english @par Summary + /// - This method will decrease the priority for the process this object represents by one. + /// \~english @param None + /// \~english @retval None + /// \~english @par Preconditions + /// -no precondition + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - Retrieve the current priority of the process. Check to see if already at minimum. + /// If so just return. Otherwise decrease by one and set the priority... + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void DecreasePriorityByOne(void); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup GetPriority + /// \~english @par Summary + /// - This method will return to the caller the currently configured process priority. + /// \~english @param None + /// \~english @retval int priority - process priority + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - If the result of function sched_getparam(m_tProcessId, &cur_sch_params) is less than -1,\n + /// then m_iErrorCode will be seted with errno. + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - If the result of function sched_getparam(m_tProcessId, &cur_sch_params)\n + /// is less than -1,will be return -1,else return Currently configured process priority. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + int const GetPriority(void); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SetProcessName + /// \~english @par Summary + /// - This method will set this objects process name member variable to the provided string value. + /// \~english @param [in] p_strProcessName_i + /// - SS_String - Process Name to set the m_strProcessName member variable to + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - Using p_strProcessName_i to set m_strProcessName + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - This method will set this objects process name member variable to the provided string value.\n + /// If the user of this object wishes to register the name with PosixBasedOS001 OS,\n + /// the AttachName() method should be called. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void SetProcessName(const SS_String& p_strProcessName_i); + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup GetProcessName + /// \~english @par Summary + /// - Get process name + /// \~english @param None + /// \~english @retval SS_String - Process Name + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - This method will return to the caller the registered name of this process.\n + /// been registered with the OS, a NULL string will be returned. If a name has not + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + SS_String GetProcessName(void) const { + return m_strProcessName; + } + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup CreateProcess + /// \~english @par Summary + /// - This method will create a process with the executable provided and \n + /// mode as a calling parameter.The caller can also provide a list of arguments \n + /// that will be provided to the executable at startup. + /// \~english @param [in] p_strFile_i + /// - SS_String - Path and Filename of executable to create process for + /// \~english @param [in] p_strlstArgv_i + /// - StringList - List of ARGV values for new process + /// \~english @param [in] p_eMode_i + /// - eProcessLoadMode - Mode to create and load new process + /// \~english @param [in] p_strProcessName_i + /// - SS_String - This is the name that will be registered to the OS for this process + /// \~english @param [in] p_eSchedulingPolicy_i + /// - eProcessSchedulingPolicy + /// \~english @param [in] p_iPriority_i + /// - int - Priority for this process + /// \~english @param [in] unix_user_name + /// - char* - unix user name + /// \~english @param [in] p_lSpawnFlags_i + /// - long - Spawning flags. These are PosixBasedOS001 specific.... + /// \~english @par + /// eProcessLoadMode enum + /// \~english @code + /// - enum eProcessLoadMode { + /// WAIT, //The invoked program is loaded into available memory, is executed, + /// //and then the original program resumes execution. + /// NOWAIT, // Causes the current program to execute concurrently with the new child process. + /// }; + /// @endcode + /// \~english @par + /// eProcessSchedulingPolicy enum + /// \~english @code + /// - enum eProcessSchedulingPolicy { + /// FIFO, // A fixed priority scheduler in which the highest ready process runs until it + /// // blocks or is preempted by a higher priority process. + /// ROUND_ROBIN, // The same as FIFO, except processes at the same priority level time-slice. + /// OTHER // A general time sharing scheduler in which a process decays in priority if it + /// // consumes too much processor before blocking. It reverts to its default priority + /// // when it blocks. Should it fail to run over a 2 second period and it has decayed + /// // then it's boosted one priority level up to a maximum of its default priority. + /// }; + /// @endcode + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - set m_iErrorCode with 0 + /// set m_iReturnCode with 0 + /// set m_eProcessLoadMode with p_eMode_i; + /// set m_strFile with p_strFile_i; + /// set m_strProcessName with p_strProcessName_i; + /// use the result of function CL_ProcessCreate() to set m_tProcessId + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// -This method will create a PosixBasedOS001 process with the executable provided\n + /// and mode as a calling parameter.The caller can also provide a list of arguments\n + /// that will be provided to the executable at startup.The calling p_strProcessName \m + /// parameter is a textual name that will be associated with the newly created process\n + /// by the OS. The process state information will be maintained by this object.\n + /// Upon successful creation of the process, the scheduling policy and priority\n + /// of the process will be set to the provided values. The user can change these\n + /// values through the SetSchedulingPolicy() and SetPriority() method calls.\n + /// Using unix_user_name to get uid and gid,set uid and gid when calling\n + /// CL_ProcessCreateAttrSetUid() and CL_ProcessCreateAttrSetGid\n + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const StringList& p_strlstArgv_i, // List of ARGV values for new process + const eProcessLoadMode p_eMode_i, // Mode to create and load new process + const SS_String& p_strProcessName_i, // This is the name that will be registered to the OS for this process + const eProcessSchedulingPolicy p_eSchedulingPolicy_i, // Scheduling Policy for this process + const int p_iPriority_i, // Priority for this process + const char* unix_user_name, const long p_lSpawnFlags_i); // Spawning flags. These are PosixBasedOS001 specific.... // NOLINT (runtime/int) + + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup CreateProcess + /// \~english @par Summary + /// - This method will create a PosixBasedOS001 process with the executable\n + /// provided and mode as a calling parameter. + /// \~english @param [in] p_strFile_i + /// - SS_String - Path and Filename of executable to create process for + /// \~english @param [in] p_strProcessName_i + /// - SS_String - This is the name that will be registered to the OS for this process + /// \~english @param [in] unix_user_name + /// - char* - unix user name + /// \~english @param [in] p_lSpawnFlags_i + /// - long - Posix Spawning flags. These are PosixBasedOS001 specific + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - The caller can also provide a list of arguments that will be provided\n + /// to the executable at startup.The calling p_strProcessName parameter is a textual name\n + /// that will be associated with the newly created process by the OS.\n + /// The process state information will be maintained by this object. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const SS_String& p_strProcessName_i, // This is the name that will be registered to the OS for this process + const char* unix_user_name = NULL, const long p_lSpawnFlags_i = // NOLINT (runtime/int) + iProcess_DEFAULT_PROCESS_FLAGS); // Spawning flags. + // These are PosixBasedOS001 specific.... + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup CreateProcess + /// \~english @par Summary + /// - This method will create a process with the executable + /// provided and mode as a calling parameter. + /// \~english @param [in] p_strFile_i + /// - SS_String - Path and Filename of executable to create + /// process for + /// \~english @param [in] p_strProcessName_i + /// - SS_String - This is the name that will be registered to the + /// OS for this process + /// \~english @param [in] p_iPriority_i + /// - int - Priority of process + /// \~english @param [in] unix_user_name + /// - char* - unix user name + /// \~english @param [in] p_lSpawnFlags_i + /// - long - Posix Spawning flags. These are PosixBasedOS001 + /// specific + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - The caller can also provide a list of arguments that will be + /// provided\n + /// to the executable at startup.The calling p_strProcessName + /// parameter is a textual name\n + /// that will be associated with the newly created process by + /// the OS.\n + /// The process state information will be maintained by this + /// object. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const SS_String& p_strProcessName_i, // This is the name that will be registered to the OS for this process + const int p_iPriority_i, // Priority of this process + const char* unix_user_name = NULL, const long p_lSpawnFlags_i = // NOLINT (runtime/int) + iProcess_DEFAULT_PROCESS_FLAGS); // Spawning flags. + // These are PosixBasedOS001 specific.... + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup CreateProcess +/// \~english @par Summary +/// - This method will create a process with the executable provided and mode as a calling parameter. +/// \~english @param [in] p_strFile_i +/// - SS_String - p_strFile_i Path and Filename of executable to create process for +/// \~english @param [in] unix_user_name +/// - char* - unix user name +/// \~english @param [in] p_lSpawnFlags_i +/// - long - Spawning flags. These are PosixBasedOS001 specific. +/// \~english @retval None +/// \~english @par Preconditions +/// - +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - The caller can also provide a list of arguments that will be provided\n +/// to the executable at startup.The calling p_strProcessName parameter is a textual name\n +/// that will be associated with the newly created process by the OS.\n +/// The process state information will be maintained by this object. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const char* unix_user_name = NULL, const long p_lSpawnFlags_i = // NOLINT (runtime/int) + iProcess_DEFAULT_PROCESS_FLAGS); // Spawning flags. + // These are PosixBasedOS001 specific.... + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup CreateProcess +/// \~english @par Summary +/// - This method will create a process with the executable provided and mode as a calling parameter. +/// \~english @param [in] p_strFile_i +/// - SS_String - p_strFile_i Path and Filename of executable to create process for +/// \~english @param [in] p_strProcessName_i +/// - SS_String - This is the name that will be registered to the OS for this process +/// \~english @param [in] p_strlstArgv_i +/// - StringList - List of ARGV values for new process +/// \~english @param [in] unix_user_name +/// - char* - unix user name +/// \~english @param [in] p_lSpawnFlags_i +/// - long - Spawning flags. These are PosixBasedOS001 specific. +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - The caller can also provide a list of arguments that will be provided\n +/// to the executable at startup.The calling p_strProcessName parameter is a textual name\n +/// that will be associated with the newly created process by the OS.\n +/// The process state information will be maintained by this object. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const SS_String& p_strProcessName_i, // This is the name that will be registered to the OS for this process + const StringList& p_strlstArgv_i, // List of ARGV values for new process + const char* unix_user_name = NULL, const long p_lSpawnFlags_i = // NOLINT (runtime/int) + iProcess_DEFAULT_PROCESS_FLAGS); // Spawning flags. + // These are PosixBasedOS001 specific.... + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup CreateProcess +/// \~english @par Summary +/// - This method will create a process with the executable provided and mode as a calling parameter. +/// \~english @param [in] p_strFile_i +/// - SS_String - Path and Filename of executable to create process for +/// \~english @param [in] p_strProcessName_i +/// - SS_String - This is the name that will be registered to the OS for this process +/// \~english @param [in] p_iPriority_i +/// - int - Priority for this process +/// \~english @param [in] p_strlstArgv_i +/// - StringList - List of ARGV values for new process +/// \~english @param [in] unix_user_name +/// - char* - unix user name +/// \~english @param [in] p_lSpawnFlags_i +/// - long - Spawning flags.These are PosixBasedOS001 specific. +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - The caller can also provide a list of arguments that will be provided\n +/// to the executable at startup.The calling p_strProcessName parameter is a textual name\n +/// that will be associated with the newly created process by the OS.\n +/// The process state information will be maintained by this object. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const SS_String& p_strProcessName_i, // This is the name that will be registered to the OS for this process + const int p_iPriority_i, // Priority for this process + const StringList& p_strlstArgv_i, // List of ARGV values for new process + const char* unix_user_name = NULL, const long p_lSpawnFlags_i = // NOLINT (runtime/int) + iProcess_DEFAULT_PROCESS_FLAGS); // Spawning flags. + // These are PosixBasedOS001 specific.... + ///////////////////////////////////////////////////////////////////////////////////// + /// \ingroup CreateProcess + /// \~english @par Summary + /// - This method will create a process with the executable provided and mode as a calling parameter. + /// \~english @param [in] p_strFile_i + /// - SS_String - Path and Filename of executable to create process for + /// \~english @param [in] c_argv + /// - char - This is the argument that will be registered to the OS for this process + /// \~english @param [in] environment_string + /// - char - enviroment for this process + /// \~english @param [in] cl_attr + /// - CL_ProcessAttr_t - List of ARGV values for new process + /// \~english @retval None + /// \~english @par Preconditions + /// -no preconditions + /// \~english @par Change of the internal state + /// - None + /// \~english @par Causes of failures + /// - None + /// \~english @par Classification + /// - Public + /// \~english @par Type + /// - sync only + /// \~english @par Detail + /// - The caller can also provide a list of arguments that will be provided\n + /// that will be associated with the newly created process by the OS.\n + /// The process state information will be maintained by this object. + /// \~english @see None + //////////////////////////////////////////////////////////////////////////////////// + void CreateProcess(const SS_String* p_str_file, char* const * c_argv, + char* environment_string, const CL_ProcessAttr_t *cl_attr); + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup CreateProcessWait +/// \~english @par Summary +/// - This method will create a process with the executable provided. +/// \~english @param [in] p_strFile_i +/// - SS_String - Path and Filename of executable to create process for +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will create a process with the executable provided.\n +/// The process state information will be maintained by this object. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void CreateProcessWait(const SS_String& p_strFile_i); // Path and Filename of executable to create process for + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup CreateProcessWait +/// \~english @par Summary +/// - This method will create a PosixBasedOS001 process with the executable provided. +/// \~english @param [in] p_strFile_i +/// - SS_String - Path and Filename of executable to create process for +/// \~english @param [in] p_strlstArguments_i +/// - StringList - List of process calling arguments +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - None +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will create a PosixBasedOS001 process with the executable provided.\n +/// The process state information will be maintained by this object. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void CreateProcessWait(const SS_String& p_strFile_i, // Path and Filename of executable to create process for + const StringList& p_strlstArguments_i); // List of process calling arguments + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup KillProcess +/// \~english @par Summary +/// - This method will send the specified signal to the process represented by this object +/// \~english @param [in] signal +/// - int - signal +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - Intialize the objects m_iErrorCode member variable to 0 +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will send the specified signal to the process represented by this object.\n +/// All variables associated with this object will be initialized to a know value.\n +/// If this process has a name registered with the OS, that name will be removed. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void KillProcess(int signal = SIGKILL); + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup DoesProcessExist +/// \~english @par Summary +/// -Check if the process existed +/// \~english @param None +/// \~english @retval TRUE - Process Exists +/// \~english @retval FALSE - Process does not exist +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - The internal state is not changed. +/// \~english @par Causes of failures +/// -None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will return a BOOLean indicating whether this process exists. +/// \~english @see +//////////////////////////////////////////////////////////////////////////////////// + BOOL DoesProcessExist(void); + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup DisableAutoKill +/// \~english @par Summary +/// -none +/// \~english @param None +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - set m_fAutoKill as FALSE +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will disable the Auto Kill function in the destructor,\n +/// thus letting the process whom this object represents continue running. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void DisableAutoKill(void) { + m_fAutoKill = FALSE; + } + +///////////////////////////////////////////////////////////////////////////////////// +/// \ingroup EnableAutoKill +/// \~english @par Summary +/// - Enable the Auto Kill +/// \~english @param None +/// \~english @retval None +/// \~english @par Preconditions +/// -no preconditions +/// \~english @par Change of the internal state +/// - set m_fAutoKill as TRUE +/// \~english @par Causes of failures +/// - None +/// \~english @par Classification +/// - Public +/// \~english @par Type +/// - sync only +/// \~english @par Detail +/// - This method will Enable the Auto Kill function in the destructor,\n +/// thus killing the process whom this object represents. +/// \~english @see None +//////////////////////////////////////////////////////////////////////////////////// + void EnableAutoKill(void) { + m_fAutoKill = TRUE; + } + + private: + // Class Data Members + //--------------------------------------------- + + long m_lValidationTag; // Used to check if this is a valid // NOLINT (runtime/int) + // object or not. + + int m_cpu_assign; + pid_t m_tProcessId; // This is the process ID for this process. All command, control, + // and status gathering will use this ID. + eProcessLoadMode m_eProcessLoadMode; // This is the process load mode provided by the caller when this + // process was created. + SS_String m_strFile; // This is the executable path and file name of this process + StringList m_strlstArgv; // This is the calling parameter Argv list provided by the caller. + SS_String m_strProcessName; // This is the name that was registered to the OS for process identification + + int m_iErrorCode; // This was the returned PosixBasedOS001 error code for the last call. The programmer + // can look at this error code if an error was detected and an + // exception was thrown. + BOOL m_fAutoKill; // Used to indicate to destructor to kill the process whom this object + // represents on exit. + int m_iReturnCode; + + ////////////////////////////////////////////////////////////////////// + /// Copy + /// + /// Copies data members from the specified object to this object. + /// No attempt is made to free dynamically allocated objects within + /// this object (you must do that before calling this function). + /// + /////////////////////////////////////////////////////////////////////// + void Copy(const Process& p_rhs_i); + + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// ConvertToPosixBasedOS001SchedularPolicy + /// This method will return to the caller the equivalent PosixBasedOS001 schedular policy for the process + /// that this object represents + /// + /// + /// Calling Arguments: + /// Scheduling Policy + /// + /// \return policy + /// FIFO, A fixed priority scheduler in which the highest ready process runs until it + /// blocks or is preempted by a higher priority process. + /// ROUND_ROBIN, The same as FIFO, except processes at the same priority level time-slice. + /// OTHER A general time sharing scheduler in which a process decays in priority if it + /// consumes too much processor before blocking. It reverts to its default priority + /// when it blocks. Should it fail to run over a 2 second period and it has decayed + /// then it's boosted one priority level up to a maximum of its default priority. + ////////////////////////////////////////////////////////////////////////////////////////////////////////// + int const ConvertToPosixBasedOS001SchedularPolicy( + const eProcessSchedulingPolicy p_eSchedulingPolicy_i); + + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// ConvertFromPosixBasedOS001SchedularPolicy + /// + /// This method will return to the caller the eProcessSchedulingPolicy based on the PosixBasedOS001 schedular + /// policy for the process that this object represents + /// + /// + /// Calling Arguments: + /// PosixBasedOS001 Scheduling Policy + /// + /// \return policy + /// FIFO, A fixed priority scheduler in which the highest ready process runs until it + /// blocks or is preempted by a higher priority process. + /// ROUND_ROBIN, The same as FIFO, except processes at the same priority level time-slice. + /// OTHER A general time sharing scheduler in which a process decays in priority if it + /// consumes too much processor before blocking. It reverts to its default priority + /// when it blocks. Should it fail to run over a 2 second period and it has decayed + /// then it's boosted one priority level up to a maximum of its default priority. + /////////////////////////////////////////////////////////////////////////////////////////////////////// + eProcessSchedulingPolicy const ConvertFromPosixBasedOS001SchedularPolicy( + const int p_iPosixBasedOS001chedulingPolicy_i); + + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SS_SystemServicesIf + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// \brief Check environment variable MOCK_LIBRARY where Mock Library Name to set in LD_PRELOAD is set + /// and output character string to set in LD_PRELOAD if there is setting. + /// \return + //////////////////////////////////////////////////////////////////////////////////////////////////// + void CheckLdPreLoad(SS_String *process_path, char *environment_string); + + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// \ingroup SS_SystemServicesIf + //////////////////////////////////////////////////////////////////////////////////////////////////// + /// \brief Acquire the character string of the environment variable and set it in String Vector + /// and return in a pointer of Vector. + /// \return vector<SS_String> pointer + //////////////////////////////////////////////////////////////////////////////////////////////////// + std::vector<SS_String> *GetEnvironVector(void); +// ---------------------------------------- +// ---------------- End ------------------- +}; +#endif // NOLINT (build/header_guard) + +/** @}*/ +/** @}*/ +/** @}*/ |