diff options
Diffstat (limited to 'systemservice/power_service/server/src/ss_power_config.cpp')
-rwxr-xr-x | systemservice/power_service/server/src/ss_power_config.cpp | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/systemservice/power_service/server/src/ss_power_config.cpp b/systemservice/power_service/server/src/ss_power_config.cpp deleted file mode 100755 index 3975b56..0000000 --- a/systemservice/power_service/server/src/ss_power_config.cpp +++ /dev/null @@ -1,188 +0,0 @@ -/* - * @copyright Copyright (c) 2016-2020 TOYOTA MOTOR CORPORATION. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/////////////////////////////////////////////////////////////////////////////// -/// \ingroup tag_PowerService -/// \brief This file supports power service configuration. -/// -/////////////////////////////////////////////////////////////////////////////// -#include <string> -#include "ss_power_config.h" - -// define all the configuration parmeters that will be used to get data -const char * PowerConfiguration::kPowerLogicPlugin = "PowerLogicPlugin.dll"; -const char * PowerConfiguration::kLVI1Timeout = "LVI1.Timeouts_Timeout"; -const char * PowerConfiguration::kLVI1HysteresisTimeout = - "LVI1.Hysteresis_Timeout"; -const char * PowerConfiguration::kLVI1HysteresisEnabled = - "LVI1.Hysteresis_Enabled"; -const char * PowerConfiguration::kLVI1HysteresisTries = "LVI1.Hysteresis_Tries"; -const char * PowerConfiguration::kLVI2Timeout = "LVI2.Timeouts_Timeout"; -const char * PowerConfiguration::kLVI2HysteresisTimeout = - "LVI2.Hysteresis_Timeout"; -const char * PowerConfiguration::kLVI2HysteresisEnabled = - "LVI2.Hysteresis_Enabled"; -const char * PowerConfiguration::kLVI2HysteresisTries = "LVI2.Hysteresis_Tries"; -const char * PowerConfiguration::kShutdownTimeout = "Shutdown.Timeouts_Timeout"; -const char * PowerConfiguration::kShutdownHysteresisTimeout = - "Shutdown.Hysteresis_Timeout"; -const char * PowerConfiguration::kShutdownHysteresisEnabled = - "Shutdown.Hysteresis_Enabled"; -const char * PowerConfiguration::kShutdownHysteresisTries = - "Shutdown.Hysteresis_Tries"; -/// < defines the names in the cfg file that are used to get required modules names -const char * PowerConfiguration::kRequiredWakeupModules = - "Wakeup.RequiredModules."; /// < once all the modules have been wakened up send wake-up complete -const char * PowerConfiguration::kRequiredShutdownModules = - "Shutdown.RequiredModules."; /// < once all the modules have been shutdown send shutdown complete -const char * PowerConfiguration::kRequiredLvi2Modules = - "LVI2.RequiredModules."; /// < once all the modules have been wakened up send wake-up complete - -PowerConfiguration::PowerConfiguration(std::string f_configfilename) - : m_ConfigFileName(f_configfilename) { -} - -PowerConfiguration::~PowerConfiguration() { -} - -BOOL PowerConfiguration::LoadParameters(PowerConfigParams & params) { - EFrameworkunifiedStatus l_eStatus; - BOOL l_rtnCode = FALSE; - - CNSConfigReader *l_pReaderCfg = new CNSConfigReader(); - if (NULL == l_pReaderCfg) { // LCOV_EXCL_BR_LINE 5:new error case - // LCOV_EXCL_START 5:new error case - AGL_ASSERT_NOT_TESTED(); // LCOV_EXCL_LINE 200: test assert - FRAMEWORKUNIFIEDLOG(ZONE_ERR, __FUNCTION__, - " Error. new CNSConfigReader() returned NULL pointer."); - // LCOV_EXCL_STOP 5:new error case - } else { - if (eFrameworkunifiedStatusOK != (l_eStatus = l_pReaderCfg->Parse(m_ConfigFileName))) { - FRAMEWORKUNIFIEDLOG(ZONE_ERR, __FUNCTION__, - " Error. l_pReaderCfg->Open(%s) returned NULL pointer.", - m_ConfigFileName.c_str()); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kShutdownTimeout, - params.shutdown.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(ShutdownTimeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI1Timeout, params.lvi1.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(LVI1Timeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI2Timeout, params.lvi2.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(LVI2Timeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kShutdownHysteresisTimeout, - params.shutdown.hysteresis.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(ShutdownHysteresisTimeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI1HysteresisTimeout, - params.lvi1.hysteresis.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI1HysteresisTimeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI2HysteresisTimeout, - params.lvi2.hysteresis.timeout))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI2HysteresisTimeout)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kShutdownHysteresisTries, - params.shutdown.hysteresis.tries))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(ShutdownHysteresisTries)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI1HysteresisTries, - params.lvi1.hysteresis.tries))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI1HysteresisTries)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetInt(kLVI2HysteresisTries, - params.lvi2.hysteresis.tries))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI2HysteresisTries)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetBool( - kShutdownHysteresisEnabled, params.shutdown.hysteresis.enabled))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(ShutdownHysteresisEnabled)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetBool(kLVI1HysteresisEnabled, - params.lvi1.hysteresis.enabled))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI1HysteresisEnabled)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetBool(kLVI2HysteresisEnabled, - params.lvi2.hysteresis.enabled))) { - LOG_STATUS_IF_ERRORED(l_eStatus, - "l_pReaderCfg->GetInt(LVI2HysteresisEnabled)"); - } else if (eFrameworkunifiedStatusOK - != (l_eStatus = l_pReaderCfg->GetString(kPowerLogicPlugin, - params.power_logic_plugin))) { - LOG_STATUS_IF_ERRORED(l_eStatus, "l_pReaderCfg->GetInt(PowerLogicPlugin)"); - } else { - l_rtnCode = TRUE; - } - - delete l_pReaderCfg; - } - - return (l_rtnCode); -} - -void PowerConfiguration::LoadDefaultParameters(PowerConfigParams & params) { - params.power_logic_plugin = "ss_powerlogic.dll"; - params.shutdown.timeout = 600; // thats 5mins - params.shutdown.hysteresis.enabled = FALSE; // There should be hysteresis for Shutdown - params.shutdown.hysteresis.timeout = 0; // Don't Care since disabled. - params.shutdown.hysteresis.tries = 0; // Don't Care since disabled. - params.lvi1.timeout = 2; // thats 2secs - params.lvi1.hysteresis.enabled = TRUE; // Enable LVI1 hysteresis - params.lvi1.hysteresis.tries = 2; // check twice before switching to LVI1 - params.lvi1.hysteresis.timeout = 500; // thats 500 msecs - params.lvi2.timeout = 2; // thats 2secs - params.lvi2.hysteresis.enabled = TRUE; // Enable LVI2 hysteresis - params.lvi2.hysteresis.tries = 2; // check twice before switching to LVI2 - params.lvi2.hysteresis.timeout = 100; // thats 100 msecs -} - -void PowerConfiguration::PrintConfigInfo(PowerConfigParams & f_params) { - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.timeout: %d", - f_params.shutdown.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.timeout: %d", f_params.lvi1.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.timeout: %d", f_params.lvi2.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.timeout: %d", - f_params.shutdown.hysteresis.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.timeout: %d", - f_params.lvi1.hysteresis.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.hysteresis.timeout: %d", - f_params.lvi2.hysteresis.timeout); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.tries: %d", - f_params.shutdown.hysteresis.tries); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.tries: %d", - f_params.lvi1.hysteresis.tries); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.tries: %d", - f_params.lvi1.hysteresis.tries); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "shutdown.hysteresis.enabled: %d", - f_params.shutdown.hysteresis.enabled); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi1.hysteresis.enabled: %d", - f_params.lvi1.hysteresis.enabled); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "lvi2.hysteresis.enabled: %d", - f_params.lvi2.hysteresis.enabled); - FRAMEWORKUNIFIEDLOG(ZONE_INFO, __FUNCTION__, "power_logic_plugin: %s", - f_params.power_logic_plugin.c_str()); - return; -} |