agl-basesystem

251 files changed, 44949 insertions, 0 deletions

diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/COPYING.MIT b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/COPYING.MIT
new file mode 100644
index 00000000..89de3547
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.evaproprietary.md b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.evaproprietary.md
new file mode 100644
index 00000000..69a33d8c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.evaproprietary.md
@@ -0,0 +1,121 @@
+# R-Car Gen3 Evaluation Software Package for Linux
+
+
+The meta-rcar-gen3 layer of meta-renesas supports the Click-through licensed
+Linux Drivers and Gfx/MMP packages.
+
+This README describes how to use these features and setting local.conf.
+
+```bash
+    I/   Build configuration
+    II/  Obtain and Install Renesas Graphics Drivers
+```
+
+**NOTE:**
+
+* However, to have a completed local.conf, please also refer to Build
+Instruction in [meta-renesas/meta-rcar-gen3/README.md](README.md).
+
+* In addition, these libraries are not provided with recipes. If you would like
+to use, you will need to get them from Renesas.
+
+## I/ Build configuration
+
+
+* Add the target board to local.conf
+
+    * For Salvator-X board
+
+    ```bash
+       MACHINE = "salvator-x"
+    ```
+
+    * For R-Car Starter Kit Premier(H3ULCB) board
+
+    ```bash
+       MACHINE = "h3ulcb"
+    ```
+
+    * For R-Car Starter Kit Pro(M3ULCB) board
+
+    ```bash
+       MACHINE = "m3ulcb"
+    ```
+
+    * For R-Car Starter Kit Pro(M3NULCB) board
+
+    ```bash
+       MACHINE = "m3nulcb"
+    ```
+
+    * For Ebisu board
+
+    ```bash
+       MACHINE = "ebisu"
+    ```
+
+* Set SOC family name
+
+    * For H3: r8a7795
+
+    ```bash
+       SOC_FAMILY = "r8a7795"
+    ```
+
+    * For M3: r8a7796
+
+    ```bash
+       SOC_FAMILY = "r8a7796"
+    ```
+
+    * For M3N: r8a77965
+
+    ```bash
+       SOC_FAMILY = "r8a77965"
+    ```
+
+    * For E3: r8a77990
+
+    ```bash
+        # Already added in machine config: ebisu.conf
+        SOC_FAMILY = "r8a77990"
+    ```
+
+* When using the click-through version of the gfx/mmp packages, you need to add
+the following to your local.conf
+
+```bash
+   DISTRO_FEATURES_append = " use_eva_pkg"
+```
+
+## II/ Obtain and Install Renesas Graphics Drivers
+
+
+Before setting up the build environment, you need to download the proprietary
+drivers.
+
+* Download Renesas graphic drivers with a "click through" license from
+[Renesas website][rcar Linux Drivers] and unzip them into a folder.
+
+**NOTE:**
+
+* You have to register with a free account on MyRenesas and accept the license
+conditions before downloading the drivers.
+The operation is fast and simple nevertheless mandatory to access evaluation of
+non open-source drivers for free.
+Once you registered, you can download two zip files.
+
+```bash
+$ cd <folder containing the two zip files>
+$ unzip -o R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip
+$ unzip -o R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip
+```
+
+To install them into the correct place in the Yocto BSP, a copy script is used.
+
+```bash
+$ cd ./meta-renesas
+$ sh meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh <path to the folder containing the packages>
+```
+
+[rcar Linux Drivers]: https://www.renesas.com/us/en/solutions/automotive/rcar-download/rcar-demoboard-2.html
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.md b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.md
new file mode 100644
index 00000000..dfb712cb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.md
@@ -0,0 +1,243 @@
+# meta-rcar-gen3
+
+
+This layer provides the support for the evaluation board mounted ARM SoCs of
+Renesas Electronics, called the R-Car Generation 3.
+
+Currently, this supports boards and the SoCs of the following:
+
+```bash
+    - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N)
+    - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3)
+    - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3)
+    - Board: R-Car Starter Kit pro(M3NULCB) / SoC: R8A77965 (R-Car M3N)
+    - Board: Ebisu / SoC: R8A77990 (R-Car E3)
+```
+
+## Branch Policy
+
+
+* This is Community Yocto BSP to follow Yocto/Poky releases.
+
+* It is not supported to the level of the Customer Yocto BSP.
+
+## Tag Policy
+
+
+*  Releases are created from the respective working branch.
+
+*  After a Customer Yocto BSP version releases, the Community Yocto BSP will be
+rebased and released accordingly.
+
+*  thud-X:
+
+    * The versions used on thud (Yocto Project 2.6) will start on
+      thud-Yocto-v3.19.0 to keep the major version numbers in sync.
+
+## Contribution
+
+
+* Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
+
+* Please see the MAINTAINERS file for more details.
+
+## Layer Dependencies
+
+
+This layer depends on:
+
+* poky
+
+```bash
+    URI: git://git.yoctoproject.org/poky
+    layers: meta, meta-yocto, meta-yocto-bsp
+    branch: thud
+    revision: e7f0177ef3b6e06b8bc1722fca0241fef08a1530
+```
+* meta-linaro
+
+```bash
+    URI: git://git.linaro.org/openembedded/meta-linaro.git
+    layers: meta-optee
+    branch: thud
+    revision: 0a94decea3bd2504590d1637eadff9d502c19ee2
+```
+
+* meta-openembedded
+
+```bash
+    URI: git://git.openembedded.org/meta-openembedded
+    layers: meta-oe
+    branch: thud
+    revision: 4cd3a39f22a2712bfa8fc657d09fe2c7765a4005
+```
+
+## Build Instructions
+
+
+The following instructions require a Poky installation (or equivalent).
+
+* This also needs git user name and email defined:
+
+```bash
+   $ git config --global user.email "you@example.com"
+   $ git config --global user.name "Your Name"
+```
+
+* Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
+
+```bash
+    $ source poky/oe-init-build-env
+```
+
+* After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer.
+e.g.:
+
+```bash
+    BBLAYERS ?= " \
+        <path to layer>/poky/meta \
+        <path to layer>/poky/meta-yocto \
+        <path to layer>/poky/meta-yocto-bsp \
+        <path to layer>/meta-renesas/meta-rcar-gen3 \
+        <path to layer>/meta-linaro/meta-optee \
+        <path to layer>/meta-openembedded/meta-oe \
+    "
+```
+
+* To build a specific target BSP, configure the associated machine in local.conf:
+
+```bash
+    MACHINE ??= "<supported board name>"
+```
+
+Board|MACHINE
+-----|-------
+Salvator-X/XS|MACHINE="salvator-x"
+Ebisu|MACHINE="ebisu"
+Starter Kit Pro (M3ULCB)|MACHINE="m3ulcb"
+Starter Kit Pro (M3NULCB)|MACHINE="m3nulcb"
+Starter Kit Premier (H3ULCB)|MACHINE="h3ulcb"
+
+* Select the SOC
+
+    * For H3: r8a7795
+
+    ```bash
+        SOC_FAMILY = "r8a7795"
+    ```
+
+    * For M3: r8a7796
+
+    ```bash
+        SOC_FAMILY = "r8a7796"
+    ```
+
+    * For M3N: r8a77965
+
+    ```bash
+        SOC_FAMILY = "r8a77965"
+    ```
+
+    * For E3: r8a77990
+
+    ```bash
+        # Already added in machine config: ebisu.conf
+        SOC_FAMILY = "r8a77990"
+    ```
+
+* Configure for systemd init in local.conf:
+
+```bash
+    DISTRO_FEATURES_append = " systemd"
+    VIRTUAL-RUNTIME_init_manager = "systemd"
+```
+
+* Configure for ivi-shell and ivi-extension
+
+```bash
+    DISTRO_FEATURES_append = " ivi-shell"
+```
+
+* Configure for USB 3.0
+
+```bash
+    MACHINE_FEATURES_append = " usb3"
+```
+
+* Enable tuning support for Capacity Aware migration Strategy (CAS)
+
+```bash
+    MACHINE_FEATURES_append = " cas"
+```
+
+* For a list of sample local.conf file, please refer to: [docs/sample/conf/](docs/sample/conf/)
+
+* Build the target file system image using bitbake:
+
+```bash
+    $ bitbake core-image-minimal
+```
+
+After completing the images for the target machine will be available in the
+output directory 'tmp/deploy/images/<supported board name>'.
+
+Images generated:
+
+* Image (generic Linux Kernel binary image file)
+
+* \<SoC\>-\<machine name\>.dtb (DTB for target machine)
+
+* core-image-minimal-\<machine name\>.tar.bz2 (rootfs tar+bzip2)
+
+* core-image-minimal-\<machine name\>.ext4  (rootfs ext4 format)
+
+## Build Instructions for SDK
+
+
+NOTE:
+
+**This may be changed in the near feature. These instructions are tentative.**
+
+Should define the staticdev in SDK image feature for installing the static libs
+to SDK in local.conf.
+
+```bash
+    SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+```
+
+### For 64-bit target SDK (aarch64)
+
+
+Use `bitbake -c populate_sdk` for generating the toolchain SDK
+
+```bash
+    $ bitbake core-image-minimal -c populate_sdk
+```
+
+The SDK can be found in the output directory `tmp/deploy/sdk`
+
+* `poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh`
+
+### Usage of toolchain SDK
+
+
+Install the SDK to the default: `/opt/poky/x.x`
+
+* For 64-bit target SDK
+
+```bash
+    $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
+```
+
+* For 64-bit application, using environment script in `/opt/poky/x.x`
+
+```bash
+    $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
+```
+
+## R-Car Generation 3 Information
+
+
+Refer to the following for more information from eLinux website
+
+https://elinux.org/R-Car
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.proprietary.md b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.proprietary.md
new file mode 100644
index 00000000..22da393d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/README.proprietary.md
@@ -0,0 +1,219 @@
+# Proprietary libraries for meta-rcar-gen3
+
+
+The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX)
+libraries, proprietary library of multimedia, and ICCOM software.
+
+This README describes how to use these features and setting to local.conf.
+
+```bash
+    I/   Board configuration
+    II/  Build with GLES
+    III/ Build with Renesas multimedia libraries
+    IV/  Enable Linux ICCOM driver and Linux ICCOM library
+```
+
+There are 2 main paths:
+
+* Please check section II to config for GLES.
+* Please check section III to enable Multimedia functions.
+
+If you would like to use Linux ICCOM driver and Linux ICCOM library, please
+check section IV.
+
+**NOTE:**
+
+* However, to have a completed local.conf, please also refer to Build
+Instruction in [meta-renesas/meta-rcar-gen3/README.md](README.md).
+
+* In addition, these libraries are not provided with recipes. If you would like
+to use, you will need to get them from Renesas.
+
+## I/ Board configuration
+
+
+* Add this line to local.conf
+
+    * For Salvator-X board
+
+    ```bash
+       MACHINE = "salvator-x"
+    ```
+
+    * For R-Car Starter Kit Premier(H3ULCB) board
+
+    ```bash
+       MACHINE = "h3ulcb"
+    ```
+
+    * For R-Car Starter Kit Pro(M3ULCB) board
+
+    ```bash
+       MACHINE = "m3ulcb"
+    ```
+
+    * For R-Car Starter Kit Pro(M3NULCB) board
+
+    ```bash
+        MACHINE = "m3nulcb"
+    ```
+
+    * For Ebisu board
+
+    ```bash
+       MACHINE = "ebisu"
+    ```
+
+* Set SOC family name
+
+    * For H3: r8a7795
+
+    ```bash
+       SOC_FAMILY = "r8a7795"
+    ```
+
+    * For M3: r8a7796
+
+    ```bash
+       SOC_FAMILY = "r8a7796"
+    ```
+
+    * For M3N: r8a77965
+
+    ```bash
+       SOC_FAMILY = "r8a77965"
+    ```
+
+    * For E3: r8a77990
+
+    ```bash
+        # Already added in machine config: ebisu.conf
+        SOC_FAMILY = "r8a77990"
+    ```
+
+## II/ Build with GLES
+
+
+For wayland with GSX
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Set local.conf the following.
+
+```bash
+    # Enable Gfx Pkgs
+    MACHINE_FEATURES_append = " gsx"
+    MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+    # for Wayland/Weston
+    DISTRO_FEATURES_NATIVESDK_append = " wayland"
+    DISTRO_FEATURES_append = " pam"
+    PREFERRED_PROVIDER_virtual/libgles1 = ""
+    PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+    PREFERRED_PROVIDER_virtual/egl = "libegl"
+    PREFERRED_PROVIDER_virtual/libgl = ""
+    PREFERRED_PROVIDER_virtual/mesa = ""
+    PREFERRED_PROVIDER_libgbm = "libgbm"
+    PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+    BBMASK = "mesa-gl"
+```
+
+* Run `bitbake core-image-weston`
+
+## III/ Build with Renesas multimedia libraries
+
+
+Multimedia portions depend on GLES portions.
+
+### A/ Configuration for Multimedia features
+
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Please set local.conf the following.
+
+```bash
+    # Enable multimedia features.
+    # This provides package group of plug-ins of the GStreamer, multimedia
+    # libraries and kernel drivers.
+
+        MACHINE_FEATURES_append = " multimedia"
+```
+
+### B/ Configuration for optional codecs and middleware
+
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Add features to DISTRO_FEATURES_append to local.conf
+
+```bash
+    # Additional configuration in OMX module
+    " h263dec_lib"       - for OMX Media Component H263 Decoder Library
+    " h264dec_lib"       - for OMX Media Component H264 Decoder Library
+    " h264enc_lib"       - for OMX Media Component H.264 Encoder Library
+    " h265dec_lib"       - for OMX Media Component H265 Decoder Library
+    " mpeg2dec_lib"      - for OMX Media Component MPEG2 Decoder Library
+    " mpeg4dec_lib"      - for OMX Media Component MPEG4 Decoder Library
+    " vc1dec_lib"        - for OMX Media Component VC-1 Decoder Library
+    " divxdec_lib"       - for OMX Media Component DivX Decoder Library
+    " rvdec_lib"         - for OMX Media Component RealVideo Decoder Library
+    " alacdec_lib"       - for OMX Media Component ALAC Decoder Library
+    " flacdec_lib"       - for OMX Media Component FLAC Decoder Library
+    " aaclcdec_lib"      - for OMX Media Component AAC-LC Decoder Library
+    " aaclcdec_mdw"      - for AAC-LC 2ch Decoder Middleware for Linux
+    " aacpv2dec_lib"     - for OMX Media Component aacPlus V2 Decoder Library
+    " aacpv2dec_mdw"     - for aacPlus V2 Decoder Middleware for Linux
+    " mp3dec_lib"        - for OMX Media Component MP3 Decoder Library
+    " mp3dec_mdw"        - for MP3 Decoder Middleware for Linux
+    " wmadec_lib"        - for OMX Media Component WMA Standard Decoder Library
+    " wmadec_mdw"        - for WMA Standard Decoder Middleware for Linux
+    " dddec_lib"         - for OMX Media Component Dolby(R) Digital Decoder Library
+    " dddec_mdw"         - for Dolby(R) Digital Decoder Middleware for Linux
+    " aaclcenc_lib"      - for OMX Media Component AAC-LC Encoder Library
+    " vp8dec_lib"        - for OMX Media Component VP8 Decoder Library for Linux
+    " vp8enc_lib"        - for OMX Media Component VP8 Encoder Library for Linux
+    " vp9dec_lib"        - for OMX Media Component VP9 Decoder Library for Linux
+    " aaclcenc_mdw"      - for AAC-LC Encoder Middleware for Linux
+    " cmsbcm"            - for CMS Basic Color Management Middleware for Linux
+    " cmsblc"            - for CMS CMM3 Backlight Control Middleware for Linux
+    " cmsdgc"            - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux
+    " dtv"               - for ISDB-T DTV Software Package for Linux
+    " dvd"               - for DVD Core-Middleware for Linux
+    " adsp"              - for ADSP driver, ADSP interface and ADSP framework for Linux
+    " avb"               - for AVB Software Package for Linux
+```
+
+Ex:
+```
+    DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw"
+```
+
+### C/ Configuration for test packages
+
+
+Must ensure that Multimedia features have been enabled.
+(Please refer to III/A to enable Multimedia.)
+
+* Please add feature to DISTRO_FEATURES_append to local.conf.
+
+```bash
+    # Configuration for multimedia test package
+
+        DISTRO_FEATURES_append = " mm-test"
+```
+
+## IV/ Enable Linux ICCOM driver and Linux ICCOM library
+
+
+For Linux ICCOM driver and Linux ICCOM library
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Please set local.conf the following.
+
+```bash
+    DISTRO_FEATURES_append = " iccom"
+```
+END.
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/layer.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/layer.conf
new file mode 100644
index 00000000..cc52dc6b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/layer.conf
@@ -0,0 +1,12 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+    ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "rcar-gen3"
+BBFILE_PATTERN_rcar-gen3 = "^${LAYERDIR}/"
+BBFILE_PRIORITY_rcar-gen3 = "6"
+
+LAYERSERIES_COMPAT_rcar-gen3 = "thud"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/ebisu.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/ebisu.conf
new file mode 100644
index 00000000..8d53a3f7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/ebisu.conf
@@ -0,0 +1,55 @@
+#@TYPE: Machine
+#@NAME: Ebisu machine
+#@DESCRIPTION: Machine configuration for running Ebisu
+
+SOC_FAMILY = "r8a77990"
+
+DEFAULTTUNE ?= "cortexa53"
+require conf/machine/include/tune-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for E3
+KERNEL_DEVICETREE = " \
+    renesas/r8a77990-ebisu.dtb \
+    renesas/r8a77990-ebisu-4d.dtb \
+    renesas/r8a77990-es10-ebisu.dtb \
+    renesas/r8a77990-es10-ebisu-4d.dtb \
+"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+# E3 u-boot configure
+UBOOT_CONFIG ??= "ebisu ebisu-4d"
+UBOOT_CONFIG[ebisu] = "r8a77990_ebisu_defconfig"
+UBOOT_CONFIG[ebisu-4d] = "r8a77990_ebisu-4d_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.85"
+
+# xserver-xorg
+PREFERRED_VERSION_xserver-xorg = "1.19.6"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/h3ulcb.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/h3ulcb.conf
new file mode 100644
index 00000000..2161e22a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/h3ulcb.conf
@@ -0,0 +1,55 @@
+#@TYPE: Machine
+#@NAME: H3ULCB machine
+#@DESCRIPTION: Machine configuration for running H3ULCB
+
+SOC_FAMILY = "r8a7795"
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = " \
+    renesas/r8a7795-h3ulcb.dtb \
+    renesas/r8a7795-es1-h3ulcb.dtb \
+    renesas/r8a7795-h3ulcb-4x2g.dtb \
+"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+# H3ULCB u-boot configure
+UBOOT_CONFIG ??= "h3ulcb h3ulcb-4x2g"
+UBOOT_CONFIG[h3ulcb] = "r8a7795_ulcb_defconfig"
+UBOOT_CONFIG[h3ulcb-4x2g] = "r8a7795_ulcb-4x2g_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.85"
+
+# xserver-xorg
+PREFERRED_VERSION_xserver-xorg = "1.19.6"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+MACHINEOVERRIDES .= ":ulcb"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7795.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7795.inc
new file mode 100644
index 00000000..dda3d76d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7795.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.14%"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7796.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7796.inc
new file mode 100644
index 00000000..dda3d76d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a7796.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.14%"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77965.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77965.inc
new file mode 100644
index 00000000..dda3d76d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77965.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.14%"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77990.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77990.inc
new file mode 100644
index 00000000..dda3d76d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/r8a77990.inc
@@ -0,0 +1,3 @@
+SOC_FAMILY =. "rcar-gen3:"
+require conf/machine/include/soc-family.inc
+LINUXLIBCVERSION = "4.14%"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa53.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa53.inc
new file mode 100644
index 00000000..ebf2c4f9
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa53.inc
@@ -0,0 +1,18 @@
+DEFAULTTUNE ?= "cortexa53"
+require conf/machine/include/arm/arch-armv8.inc
+
+TUNEVALID[cortexa53] = "Enable Cortex-A53 specific processor optimizations"
+TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}"
+
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa53", "cortexa53:", "" ,d)}"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa53", " -mtune=cortex-a53", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa53"
+ARMPKGARCH_tune-cortexa53 = "cortexa53"
+TUNE_FEATURES_tune-cortexa53 = "${TUNE_FEATURES_tune-aarch64} cortexa53"
+PACKAGE_EXTRA_ARCHS_tune-cortexa53 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa53"
+BASE_LIB_tune-cortexa53 = "lib64"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc
new file mode 100644
index 00000000..17f1f255
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc
@@ -0,0 +1,18 @@
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/arm/arch-armv8.inc
+
+TUNEVALID[cortexa57-cortexa53] = "Enable big.LITTLE Cortex-A57.Cortex-A53 specific processor optimizations"
+TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}"
+
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", "cortexa57-cortexa53:", "" ,d)}"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", " -mtune=cortex-a57.cortex-a53", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa57-cortexa53"
+ARMPKGARCH_tune-cortexa57-cortexa53 = "cortexa57-cortexa53"
+TUNE_FEATURES_tune-cortexa57-cortexa53 = "${TUNE_FEATURES_tune-aarch64} cortexa57-cortexa53"
+PACKAGE_EXTRA_ARCHS_tune-cortexa57-cortexa53 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57-cortexa53"
+BASE_LIB_tune-cortexa57-cortexa53 = "lib64"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc
new file mode 100644
index 00000000..509aee48
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc
@@ -0,0 +1,18 @@
+DEFAULTTUNE ?= "cortexa57"
+require conf/machine/include/arm/arch-armv8.inc
+
+TUNEVALID[cortexa57] = "Enable Cortex-A57 specific processor optimizations"
+TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}"
+
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", "cortexa57:", "" ,d)}"
+
+TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", " -mtune=cortex-a57", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa57"
+ARMPKGARCH_tune-cortexa57 = "cortexa57"
+TUNE_FEATURES_tune-cortexa57 = "${TUNE_FEATURES_tune-aarch64} cortexa57"
+PACKAGE_EXTRA_ARCHS_tune-cortexa57 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57"
+BASE_LIB_tune-cortexa57 = "lib64"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3nulcb.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3nulcb.conf
new file mode 100644
index 00000000..06fb9a7b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3nulcb.conf
@@ -0,0 +1,45 @@
+#@TYPE: Machine
+#@NAME: M3NULCB machine
+#@DESCRIPTION: Machine configuration for running M3NULCB
+
+SOC_FAMILY = "r8a77965"
+
+DEFAULTTUNE ?= "cortexa57"
+require conf/machine/include/tune-cortexa57.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = "renesas/r8a77965-m3nulcb.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+UBOOT_MACHINE = "r8a77965_ulcb_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.85"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+MACHINEOVERRIDES .= ":ulcb"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3ulcb.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3ulcb.conf
new file mode 100644
index 00000000..50e6ba52
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/m3ulcb.conf
@@ -0,0 +1,48 @@
+#@TYPE: Machine
+#@NAME: M3ULCB machine
+#@DESCRIPTION: Machine configuration for running M3ULCB
+
+SOC_FAMILY = "r8a7796"
+
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+require conf/machine/include/tune-cortexa57-cortexa53.inc
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+KERNEL_DEVICETREE = "renesas/r8a7796-m3ulcb.dtb"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+UBOOT_MACHINE = "r8a7796_ulcb_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.85"
+
+# xserver-xorg
+PREFERRED_VERSION_xserver-xorg = "1.19.6"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+MACHINEOVERRIDES .= ":ulcb"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/salvator-x.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/salvator-x.conf
new file mode 100644
index 00000000..27cbf4e9
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/conf/machine/salvator-x.conf
@@ -0,0 +1,84 @@
+#@TYPE: Machine
+#@NAME: Salvator-X machine
+#@DESCRIPTION: Machine configuration for running Salvator-X
+
+require conf/machine/include/${SOC_FAMILY}.inc
+# Add default tune for H3/M3
+DEFAULTTUNE ?= "cortexa57-cortexa53"
+# Add default tune for M3N
+DEFAULTTUNE_r8a77965 = "cortexa57"
+
+# Add tune configure file for M3N
+TUNE_CONF ?= "conf/machine/include/tune-cortexa57-cortexa53.inc"
+TUNE_CONF_r8a77965 = "conf/machine/include/tune-cortexa57.inc"
+
+require ${TUNE_CONF}
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for H3
+KERNEL_DEVICETREE_r8a7795 = " \
+    renesas/r8a7795-es1-salvator-x.dtb \
+    renesas/r8a7795-salvator-x.dtb \
+    renesas/r8a7795-salvator-xs.dtb \
+    renesas/r8a7795-salvator-xs-2x2g.dtb \
+    renesas/r8a7795-salvator-xs-4x2g.dtb \
+"
+# Device tree for M3
+KERNEL_DEVICETREE_r8a7796 = " \
+    renesas/r8a7796-salvator-x.dtb \
+    renesas/r8a7796-salvator-xs.dtb \
+    renesas/r8a7796-salvator-xs-2x4g.dtb \
+"
+# Device tree for M3N
+KERNEL_DEVICETREE_r8a77965 = " \
+    renesas/r8a77965-salvator-x.dtb \
+    renesas/r8a77965-salvator-xs.dtb \
+"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+# H3 u-boot configure
+UBOOT_CONFIG_r8a7795 ??= "r8a7795_salvator-x r8a7795_salvator-xs r8a7795_salvator-xs-2x2g r8a7795_salvator-xs-4x2g"
+UBOOT_CONFIG[r8a7795_salvator-x] = "r8a7795_salvator-x_defconfig"
+UBOOT_CONFIG[r8a7795_salvator-xs] = "r8a7795_salvator-xs_defconfig"
+UBOOT_CONFIG[r8a7795_salvator-xs-2x2g] = "r8a7795_salvator-xs-2x2g_defconfig"
+UBOOT_CONFIG[r8a7795_salvator-xs-4x2g] = "r8a7795_salvator-xs-4x2g_defconfig"
+# M3 u-boot configure
+UBOOT_CONFIG_r8a7796 ??= "r8a7796_salvator-x r8a7796_salvator-xs r8a7796_salvator-xs-2x4g"
+UBOOT_CONFIG[r8a7796_salvator-x] = "r8a7796_salvator-x_defconfig"
+UBOOT_CONFIG[r8a7796_salvator-xs] = "r8a7796_salvator-xs_defconfig"
+UBOOT_CONFIG[r8a7796_salvator-xs-2x4g] = "r8a7796_salvator-xs-2x4g_defconfig"
+# M3N u-boot configure
+UBOOT_CONFIG_r8a77965 ??= "r8a77965_salvator-x r8a77965_salvator-xs"
+UBOOT_CONFIG[r8a77965_salvator-x] = "r8a77965_salvator-x_defconfig"
+UBOOT_CONFIG[r8a77965_salvator-xs] = "r8a77965_salvator-xs_defconfig"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.85"
+
+# xserver-xorg
+PREFERRED_VERSION_xserver-xorg = "1.19.6"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs-book.yml b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs-book.yml
new file mode 100644
index 00000000..5c54809a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs-book.yml
@@ -0,0 +1,18 @@
+type: books
+books:
+-
+    id: hardware-support
+    title: Renesas Gen3 Boards
+    title_fr: Cartes Renesas Gen3
+    description:
+    keywords:
+    author:
+    version: master
+    dst_prefix: renesas-gen3
+    chapters:
+      - name: meta-rcar-gen3 Layer
+        url: "README.md"
+        destination: "gen3.md"
+      - name: Proprietary Drivers
+        url: "README.proprietary.md"
+        destination: "proprietary.md"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..51d1e75f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local.conf
new file mode 100644
index 00000000..52a23fe8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/bsp/local.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..83d8eb2e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,277 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..2ad6044f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,383 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..3b2c068a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..b9fde5c6
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,279 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf
new file mode 100644
index 00000000..bcbcef15
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf
@@ -0,0 +1,272 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..150e894f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,285 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..0f606bf7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf
@@ -0,0 +1,391 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "ebisu"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Configuration for USB 3.0
+MACHINE_FEATURES_append = " usb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..cfc98c06
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 00000000..c7b7b533
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..5785f2a2
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,277 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..14f4c607
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,383 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..3b2c068a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..57535bd6
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,279 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 00000000..3eb69269
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,272 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..683ae4ec
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,285 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..9b2cb09d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf
@@ -0,0 +1,391 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..7e71ed0c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,268 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 00000000..087a3a3e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,261 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..204a5043
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,274 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..b0eedb19
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,380 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..3b2c068a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..0a4a79be
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,265 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 00000000..4114bd5d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,258 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..77d6778d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..a73b537b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf
@@ -0,0 +1,377 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3nulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..0b6f13c4
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 00000000..3c63eff8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..dba007a6
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,277 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..a96df786
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,383 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..3b2c068a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..d953c74a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,279 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 00000000..672e16b8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,272 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..7b8f40cf
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,285 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..3300326e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf
@@ -0,0 +1,391 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-ltp.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-ltp.conf
new file mode 100644
index 00000000..9dd4d907
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-ltp.conf
@@ -0,0 +1,274 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks tools-sdk"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
+
+# Additional packages for LTP
+DISTRO_FEATURES_append = " pam"
+CORE_IMAGE_EXTRA_INSTALL_append = " ltp"
+IMAGE_INSTALL_append = " binutils elfutils file quota tar bzip2 sudo shadow glibc-utils net-tools procps cdrkit kernel-modules"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..ab2e8156
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,280 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
new file mode 100644
index 00000000..29c0f5db
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
@@ -0,0 +1,273 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..3d798264
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,286 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..96ff8ada
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..085d9119
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,395 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-7.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 00000000..3b2c068a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf
new file mode 100644
index 00000000..cfff0538
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf
@@ -0,0 +1,284 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks tools-sdk"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
+
+# Additional packages for LTP
+DISTRO_FEATURES_append = " pam"
+CORE_IMAGE_EXTRA_INSTALL_append = " ltp"
+IMAGE_INSTALL_append = " binutils elfutils file quota tar bzip2 sudo shadow glibc-utils net-tools procps cdrkit kernel-modules"
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 00000000..9b28b4e1
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,288 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
new file mode 100644
index 00000000..33c4cc2d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
@@ -0,0 +1,281 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Enable pam distro feature
+DISTRO_FEATURES_append = " pam"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 00000000..ea63a57c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,294 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/bblayers.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/bblayers.conf
new file mode 100644
index 00000000..882db523
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf
new file mode 100644
index 00000000..91f3c163
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf
@@ -0,0 +1,403 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796, M3N: r8a77965
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+#SOC_FAMILY = "r8a77965"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_NATIVESDK_append = " wayland"
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
+#DISTRO_FEATURES_append = " vp8dec_lib"
+
+# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
+#DISTRO_FEATURES_append = " vp8enc_lib"
+
+# OMX Media Component VP9 Decoder Library for Linux (RTM0AC0000XVVP9D30SL41C)
+#DISTRO_FEATURES_append = " vp9dec_lib"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
+# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
+#DISTRO_FEATURES_append = " dvd"
+#DISTRO_FEATURES_append = " dvd_encryption_library"
+
+# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
+# ADSP Framework (RCG3AHFWN0201ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
+# Linux ICCOM library (RCG3ZLILL4101ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
+
+# Configuration for ivi-shell and ivi-extension
+#DISTRO_FEATURES_append = " ivi-shell"
+
+# Configuration for USB 3.0
+#MACHINE_FEATURES_append = " usb3"
+
+# Add Capacity Aware migration Strategy (CAS)
+MACHINE_FEATURES_append = " cas"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
new file mode 100755
index 00000000..fd867b34
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
@@ -0,0 +1,1032 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2016-2018 All rights reserved.
+
+usage()
+{
+cat << EOF
+    usage: `basename $0` [-f] [-d] source-directory
+    -f: fource copy. ignore md5check
+    -d: debug mode
+
+    Ex)
+    `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL41C,RTM0AC0000XAAACD30SL41C.tar.gz \
+             AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL41C,RTM0AC0000XAAACE30SL41C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL41C,RTM0AC0000ADAACMZ1SL41C.tar.gz \
+                AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL41C,RTM0AC0000AEAACMZ1SL41C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H264_decoder,EVARTM0AC0000XV264D30SL41C,EVARTM0AC0000XV264D30SL41C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL41C,EVARTM0AC0000XV264E30SL41C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL41C,EVARTM0AC0000XCMCTL30SL41C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4101ZDO,RCG3VUDRL4101ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL41C,EVARTM0AC0000XVCMNE30SL41C.tar.bz2"
+_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL41C,EVARTM0AC0000XVCMND30SL41C.tar.bz2"
+_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL41C,RTM0AC0000XACMND30SL41C.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="EVARTM0RC7795GLPG0001SL41C,EVA_r8a77951_linux_gsx_binaries_gles.tar.bz2,RCH3G001L4101ZDO,GSX_KM_H3.tar.bz2 \
+           EVARTM0RC7796GLPG0001SL41C,EVA_r8a77960_linux_gsx_binaries_gles.tar.bz2,RCM3G001L4101ZDO,GSX_KM_M3.tar.bz2"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+#   echo "$1"
+#   echo "$2"
+    if [ -z "$1" ]; then
+        func_error "ERROR: func_cmn_find_file: empty filename"
+    fi
+
+    if [ -z "$2" ]; then
+        _search_dir=${_src_full}
+    else
+        _search_dir=$2
+    fi
+
+    # search zip file
+#   zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+    zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+    # search tar file
+#   tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+    tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+    # duplicate file check
+    if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+        echo "file1_zip       = $zip_count"
+        echo "file1_tar       = $tar_count"
+        func_error "ERROR: $1: too many files"
+    fi
+
+    # set result
+    if [ 1 = $zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_ZIP}
+    elif [ 1 = $tar_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+        _extract_mode=${_MODE_TAR}
+    else
+        _find_filename=""
+    fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+    case $1 in
+        $_MODE_ZIP)
+#           echo "Zip mode"
+            unzip -oq $2
+            ;;
+        $_MODE_TAR)
+#           echo "Tar mode"
+            tar xf $2
+            ;;
+        *)
+            func_error "ERROR: func_cmn_extract_archive: mode error."
+            exit 1
+            ;;
+    esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+    _md5_func_param_filename=$1
+    _md5_func_param_expectation=$2
+    if [ ! -e ${_md5_func_param_filename} ]; then
+        func_error "func_cmn_md5_check  : ERROR ${_md5_func_param_filename} not found."
+    fi
+
+    _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+    if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+        echo "Skip MD5        : `basename ${_md5_func_param_filename}`"
+        return
+    fi
+
+    if [ -n "${_debug}" ]; then
+        echo "MD5 target file = ${_md5_func_param_filename}"
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+    fi
+
+    if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+        echo "MD5 OK          : `basename ${_md5_func_param_filename}`"
+    else
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+        func_error "MD5 ERROR       : ${_md5_func_param_filename}"
+    fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+    echo "$1"
+    # cleanup temp directory.
+    func_clean_tempdir
+    exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+    echo "cleanup temp directory"
+    rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+    # search package file
+    func_cmn_find_file $1 $3
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # search file
+    num=`find ${top_dir} -name $2 | wc -l`
+    if [ ${num} -eq 1 ]; then
+        _find_filename=`find ${top_dir} -name $2`
+    else
+        # same filename exists.
+        _find_filename=`find ${top_dir} -name $2 | grep Software`
+    fi
+
+    # set mode
+    if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+        _extract_mode=${_MODE_ZIP}
+    else
+        _extract_mode=${_MODE_TAR}
+    fi
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+    # search package file
+    func_cmn_find_file $1 $4
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # MD5
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # call func_cmn_md5_check
+#    func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support.
+func_search_and_md5check_grp()
+{
+    # search group package @SRCDIR
+    func_cmn_find_file $1 $5
+    if [ -n "${_debug}" ]; then
+        echo "search group package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract group package @TMPWORK
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    cd ${_find_filename}
+    # check group pachage structure
+    # <Package name>_<version>/Package_Info.txt
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    if [ ! -e ${top_dir}/Package_Info.txt ]; then
+        echo "grp package        = $1"
+        echo "single package     = $2"
+        func_error "ERROR: Package_Info.txt not found in Group package."
+    fi
+
+    # search single package @TMPWORK/TOPDIR/<Group Package name>/
+    func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+    if [ -n "${_debug}" ]; then
+        echo "search single package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # mv <single package> TMPWORK/.
+    mv ${_find_filename} ${TMPWORK}/.
+
+    # delete group package
+    rm -rf ${TMPWORK}/${top_dir}
+
+    # call search and md5check @TMPWORK
+    func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'${pkg_name}`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+            # rigid flag = TRUE. Not found = ERROR
+            if [ "X$2" = "X1" ]; then
+                return 0
+            fi
+        else
+            find_flag=1
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        copyfile_name=$(basename ${copyfile_name})
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # file search
+        func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # install
+            install -d $2
+            install -m 0644 ${_find_filename} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # seach & MD5 check
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # Get directory name
+            # _find_filename = pkg file (full path). It is not copyfile.
+            top_dir=$(basename ${_find_filename})
+            top_dir=${top_dir%.*}
+
+            # install
+            install -d $2
+            install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+    echo ""
+    echo "Copying for Graphic Packages"
+
+    copy_flag=0
+
+    for i in ${_gfx_list}
+    do
+        user_pkg_name=`echo $i | cut -d "," -f 1`
+        user_copyfile_name=`echo $i | cut -d "," -f 2`
+        user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+        kern_pkg_name=`echo $i | cut -d "," -f 3`
+        kern_copyfile_name=`echo $i | cut -d "," -f 4`
+        kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "user_pkg_name   = ${user_pkg_name}"
+            echo "user_copyfile_name= ${user_copyfile_name}"
+            echo "user_md5_val    = ${user_md5_val}"
+            echo "kern_pkg_name   = ${kern_pkg_name}"
+            echo "kern_copyfile_name= ${kern_copyfile_name}"
+            echo "kern_md5_val    = ${kern_md5_val}"
+        fi
+
+        # user module (file1)
+        func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+        if [ -z "${_find_filename}" ]; then
+            echo "${user_pkg_name} not found!"
+            continue
+        fi
+
+        file1_top_dir=${_extract_top_dir_name}
+        echo "file1 top       : ${file1_top_dir}"
+
+        # kernel module (file2)
+        func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+        # file1 exist, but file2 not exist
+        if [ -z "${_find_filename}" ]; then
+            func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+        fi
+
+        file2_top_dir=${_extract_top_dir_name}
+        echo "file2 top       : ${file2_top_dir}"
+
+        # Finally copy is performed
+        copy_flag=1
+        install -d ${_GFX_UM_INST_DIR}
+        install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200`
+        install -d ${_GFX_KM_INST_DIR}
+        install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+        echo "Installed GFX package"
+        echo "                : ${user_pkg_name}"
+        echo "                : ${kern_pkg_name}"
+        echo ""
+    done
+
+    if [ ${copy_flag} -eq 0 ]; then
+        return
+    fi
+
+    echo ""
+    echo "Packages for GFX module were found and copied."
+    echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+    # MD5 check: OMX Media Component Audio Common Library for Linux
+    func_list_search_and_md5check "${_audio_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo ""
+        return 0
+    fi
+
+    # MD5 check: audio library.
+    func_list_search_and_md5check "${_audio_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Audio library not found."
+        return 0
+    fi
+
+    # Add audio common library to list
+    _audio_list="${_audio_common_list} ${_audio_list}"
+
+    # Install omx common lib (if not installed)
+    func_install_omx_common
+
+    # Install Audio library packages
+    func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+    _audio_common_install=1
+
+    return 1
+}
+
+# For Audio library
+func_audio()
+{
+    echo ""
+    echo "Copying for Audio Common Packages"
+
+    _audio_common_install=0
+
+    # Audio requires OMX common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # Audio Library
+    func_audio_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Audio Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for Audio module were found and copied."
+    echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+    echo ""
+    echo "Copying for Audio M/W Packages"
+
+    # MD5 check
+    func_list_search_and_md5check "${_audio_mw_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Packages for Audio M/W module were not found."
+        return 0
+    fi
+
+    # Install Audio M/W library packages
+    func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for Audio M/W module were found and copied."
+    echo /=======================================================/
+
+    return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+    if [ ${_omx_common_install} -eq 0 ]; then
+        echo ""
+        echo "Install for OMX Common Packages"
+        func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+        _omx_common_install=1
+    fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+    if [ ${_uvcs_install} -eq 0 ]; then
+        echo ""
+        echo "Installed UVCS driver"
+        func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+        _uvcs_install=1
+    fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+    echo ""
+    echo "Copying for Video Decoder Library Packages"
+
+    # MD5 check: Decoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_dec_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Decoder Common Library not found!"
+        return 0
+    fi
+
+    # MD5 check: Video Decoder Library
+    func_list_search_and_md5check "${_video_dec_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install OMX common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add video decoder common lib to list
+    _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+    _video_decoder_common_install=1
+
+    return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+    echo ""
+    echo "Copying for Video Encoder Library Packages"
+
+
+    # MD5 check Encoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_enc_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Encoder Common Library not found!"
+        return 0
+    fi
+    _video_encoder_common_install=0
+
+    # Video Encoder Library
+    # MD5 check
+    func_list_search_and_md5check "${_video_enc_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add Video encoder common library to list
+    _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+    _video_encoder_common_install=1
+
+    return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+    echo ""
+    echo "Copying for Video Decoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Decoder
+    # Decoder common Lib
+    func_video_decoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Decoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video decoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+    echo ""
+    echo "Copying for Video Encoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Encoder
+    # Encoder common Lib
+    func_video_encoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Encoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video encoder module were found and copied."
+    echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+    echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+    exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+    usage
+    exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+    case "$1" in
+        -f|--force)
+            _no_md5check=1
+            ;;
+        -d|--debug)
+            _debug=1
+            ;;
+        *)
+            _src_dirname=$(basename $1)
+            _src_path=$(cd $(dirname $1) && pwd)
+            _src_full=${_src_path}/${_src_dirname}
+            ;;
+    esac
+    shift
+done
+
+#### 3) Checking ClickThrough present
+
+COUNTFILE=$(ls ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip  2>/dev/null | wc --lines)
+if [ ${COUNTFILE} -eq 0 ]; then
+    echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip not found!"
+    usage
+    exit 1
+fi
+if [ ${COUNTFILE} -gt 1 ]; then
+    echo "More than one (${COUNTFILE}) R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip file found!"
+    echo "Clean your directory \"${_src_full}\""
+    exit 1
+fi
+
+COUNTFILE=$(ls ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip  2>/dev/null | wc --lines)
+if [ ${COUNTFILE} -eq 0 ]; then
+    echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip not found!"
+    exit 1
+fi
+if [ ${COUNTFILE} -gt 1 ]; then
+    echo "More than one (${COUNTFILE}) R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip file found!"
+    echo "Clean your directory \"${_src_full}\""
+    usage
+    exit 1
+fi
+
+unzip -d ${_src_full} -oq ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip
+unzip -d ${_src_full} -oq ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip
+
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+    echo "${_src_path}/${_src_dirname} not found."
+    usage
+    exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+    echo "src             = ${_src_dirname}"
+    echo "src_path        = ${_src_path}"
+    echo "src_full        = ${_src_full}"
+    echo "no_md5check     = ${_no_md5check}"
+    echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+    echo "ERROR: Work directory already exist."
+    exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
new file mode 100755
index 00000000..2ce4148b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
@@ -0,0 +1,1329 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2015-2018 All rights reserved.
+
+usage()
+{
+cat << EOF
+    usage: `basename $0` [-f] [-d] source-directory
+    -f: fource copy. ignore md5check
+    -d: debug mode
+
+    Ex)
+    `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name> \
+#             <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL41C,RTM0AC0000XAAACD30SL41C.tar.gz \
+             aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL41C,RTM0AC0000XAAAPD30SL41C.tar.gz \
+             MP3_decoder_lib,RTM0AC0000XAMP3D30SL41C,RTM0AC0000XAMP3D30SL41C.tar.gz \
+             WMA_decoder_lib,RTM0AC0000XAWMAD30SL41C,RTM0AC0000XAWMAD30SL41C.tar.gz \
+             AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL41C,RTM0AC0000XAAACE30SL41C.tar.gz \
+             ALAC_decoder_lib,RTM0AC0000XAALAD30SL41C,RTM0AC0000XAALAD30SL41C.tar.gz \
+             FLAC_decoder_lib,RTM0AC0000XAFLAD30SL41C,RTM0AC0000XAFLAD30SL41C.tar.gz \
+             Dolby_decoder_lib,RTM0AC0000XADD5D30SL41C,RTM0AC0000XADD5D30SL41C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name> \
+#                <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL41C,RTM0AC0000ADAACMZ1SL41C.tar.gz \
+                aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL41C,RTM0AC0000ADAAPMZ1SL41C.tar.gz \
+                MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL41C,RTM0AC0000ADMP3MZ1SL41C.tar.gz \
+                WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL41C,RTM0AC0000ADWMAMZ1SL41C.tar.gz \
+                AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL41C,RTM0AC0000AEAACMZ1SL41C.tar.gz \
+                DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL41C,RTM0AC0000ADDD5MZ1SL41C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL41C,RTM0AC0000XV263D30SL41C.tar.bz2 \
+                 H264_decoder,RTM0AC0000XV264D30SL41C,RTM0AC0000XV264D30SL41C.tar.bz2 \
+                 H265_decoder,RTM0AC0000XV265D30SL41C,RTM0AC0000XV265D30SL41C.tar.bz2 \
+                 MPEG2_decoder,RTM0AC0000XVM2VD30SL41C,RTM0AC0000XVM2VD30SL41C.tar.bz2 \
+                 MPEG4_decoder,RTM0AC0000XVM4VD30SL41C,RTM0AC0000XVM4VD30SL41C.tar.bz2 \
+                 VC1_decoder,RTM0AC0000XVVC1D30SL41C,RTM0AC0000XVVC1D30SL41C.tar.bz2 \
+                 DivX_decoder,RTM0AC0000XVDVXD30SL41C,RTM0AC0000XVDVXD30SL41C.tar.bz2 \
+                 RealVideo_decoder,RTM0AC0000XVRLVD30SL41C,RTM0AC0000XVRLVD30SL41C.tar.bz2 \
+                 VP8_decoder,RTM0AC0000XVVP8D30SL41C,RTM0AC0000XVVP8D30SL41C.tar.bz2 \
+                 VP9_decoder,RTM0AC0000XVVP9D30SL41C,RTM0AC0000XVVP9D30SL41C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name> \
+#                 <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL41C,RTM0AC0000XV264E30SL41C.tar.bz2 \
+                 VP8_encoder,RTM0AC0000XVVP8E30SL41C,RTM0AC0000XVVP8E30SL41C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL41C,RTM0AC0000XCMCTL30SL41C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4101ZDO,RCG3VUDRL4101ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL41C,RTM0AC0000XVCMNE30SL41C.tar.bz2"
+_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL41C,RTM0AC0000XVCMND30SL41C.tar.bz2"
+_audio_common_list="audio_common,RTM0AC0000XACMND30SL41C,RTM0AC0000XACMND30SL41C.tar.gz"
+
+
+# DTV Library
+# Please add DTV library to "_dtv_list"
+# Don't use space in xxx_name.
+# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dtv_km_list="dtv_km,RCG3T001L4101ZDO,Software.tar.gz"
+_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL41C,Software.tar.gz,RTM0RC0000TE020000SL41C1 \
+              dtv_userfunc,RTM0RC0000TE020000SL41C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL41C2"
+
+# DVD Library
+# Please add DVD library to "_dvd_list"
+# Don't use space in xxx_name.
+# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#           <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL41C,Software.tar.gz \
+           dvd_encrypt_lib,RTM0RC0000XDVDF301SL41C,Software.tar.gz"
+
+# CMS Library
+# Please add CMS library to "_cms_list"
+# Don't use space in xxx_name.
+# cms_list="<software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name> \
+#           <software_name>,<package_name>,<copy_file_name>"
+_cms_list="bcm,RTM0AC0000JRCMBCV0SL41C,RTM0AC0000JRCMBCV0SL41C.tar.gz \
+           blc,RTM0AC0000JRCMBLC0SL41C,RTM0AC0000JRCMBLC0SL41C.tar.gz \
+           dgc,RTM0AC0000JRCMDGV0SL41C,RTM0AC0000JRCMDGV0SL41C.tar.gz"
+
+# ADSP
+# Please add ADSP to "_adsp_list"
+# Don't use space in xxx_name.
+# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name> \
+#               <software_name>,<package_name>,<copy_file_name>"
+_adsp_um_list="adsp_fw,RCG3AHFWN0201ZDP,RCG3AHFWN0201ZDP.tar.gz \
+               adsp_if,RCG3AHIFL4101ZDP,RCG3AHIFL4101ZDP.tar.gz"
+_adsp_km_list="adsp_driver,RCG3AHPDL4101ZDO,RCG3AHPDL4101ZDO.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+#           <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="RTM0RC7795GLPG0001SL41C,r8a77951_linux_gsx_binaries_gles.tar.bz2,RCH3G001L4101ZDO,GSX_KM_H3.tar.bz2 \
+           RTM0RC7796GLPG0001SL41C,r8a77960_linux_gsx_binaries_gles.tar.bz2,RCM3G001L4101ZDO,GSX_KM_M3.tar.bz2 \
+           RTM0RC7796GLPGB001SL41C,r8a77965_linux_gsx_binaries_gles.tar.bz2,RCN3G001L4101ZDO,GSX_KM_M3N.tar.bz2 \
+           RTM0RC7799GLPG0001SL41C,r8a77990_linux_gsx_binaries_gles.tar.bz2,RCE3G001L4101ZDO,GSX_KM_E3.tar.bz2 \
+           INFRTM0RC7795GLPG0001SL41C,INF_r8a77951_linux_gsx_binaries_gles.tar.bz2,RCH3G001L4101ZDO,GSX_KM_H3.tar.bz2 \
+           INFRTM0RC7796GLPG0001SL41C,INF_r8a77960_linux_gsx_binaries_gles.tar.bz2,RCM3G001L4101ZDO,GSX_KM_M3.tar.bz2 \
+           INFRTM0RC7796GLPGB001SL41C,INF_r8a77965_linux_gsx_binaries_gles.tar.bz2,RCN3G001L4101ZDO,GSX_KM_M3N.tar.bz2 \
+           INFRTM0RC7799GLPG0001SL41C,INF_r8a77990_linux_gsx_binaries_gles.tar.bz2,RCE3G001L4101ZDO,GSX_KM_E3.tar.bz2"
+
+# ICCOM
+# Please add ICCOM to "_iccom_list"
+# Don't use space in xxx_name.
+# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+#                <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_iccom_km_list="iccom_mfis,RCG3ZLIDL4101ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4101ZNO1 \
+             iccom_sample,RCG3ZLIDL4101ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4101ZNO2"
+_iccom_um_list="iccom_lib,RCG3ZLILL4101ZNO,libiccom.tar.bz2,RCG3ZLILL4101ZNO"
+
+# Crypto Package list
+# Please add crypto (zip) package name to "_crypto_pkg_list"
+# Don't use space in xxx_name.
+# crypto_pkg_list="<packgae name> <packgae name> <packgae name>"
+_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL41C"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_MODE_CRYPTO_ZIP=3
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files"
+_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module"
+_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module \
+                  ../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-encryption-module"
+_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module"
+_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi"
+_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files"
+_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files"
+_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+#   echo "$1"
+#   echo "$2"
+    if [ -z "$1" ]; then
+        func_error "ERROR: func_cmn_find_file: empty filename"
+    fi
+
+    if [ -z "$2" ]; then
+        _search_dir=${_src_full}
+    else
+        _search_dir=$2
+    fi
+
+    # search zip file
+#   zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+    zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+    # search tar file
+#   tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+    tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+    # duplicate file check
+    if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+        echo "file1_zip       = $zip_count"
+        echo "file1_tar       = $tar_count"
+        func_error "ERROR: $1: too many files"
+    fi
+
+    crypto_zip_count=0
+    for i in ${_crypto_pkg_list}
+    do
+        if [ $1 = $i ]; then
+            crypto_zip_count=$zip_count
+            zip_count=0
+        fi
+    done
+
+    # set result
+    if [ 1 = $zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_ZIP}
+    elif [ 1 = $tar_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+        _extract_mode=${_MODE_TAR}
+    elif [ 1 = $crypto_zip_count ]; then
+        _find_filename=$(ls ${_search_dir}/$1*.zip)
+        _extract_mode=${_MODE_CRYPTO_ZIP}
+    else
+        _find_filename=""
+    fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+    case $1 in
+        $_MODE_ZIP)
+#           echo "Zip mode"
+            unzip -oq $2
+            ;;
+        $_MODE_TAR)
+#           echo "Tar mode"
+            tar xf $2
+            ;;
+        $_MODE_CRYPTO_ZIP)
+#           echo "Crypto Zip mode"
+            unzip -oq $2
+            top_dir=$(basename $2)
+            top_dir=${top_dir%.*}
+            cd ${top_dir}
+            unzip -oq *.zip
+            if [ $? -gt 0 ]; then
+                func_error "ERROR: FAILED ZIP PASSWORD"
+            fi
+            cd ${TMPWORK}
+            ;;
+        *)
+            func_error "ERROR: func_cmn_extract_archive: mode error."
+            exit 1
+            ;;
+    esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+    _md5_func_param_filename=$1
+    _md5_func_param_expectation=$2
+    if [ ! -e ${_md5_func_param_filename} ]; then
+        func_error "func_cmn_md5_check  : ERROR ${_md5_func_param_filename} not found."
+    fi
+
+    _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+    if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+        echo "Skip MD5        : `basename ${_md5_func_param_filename}`"
+        return
+    fi
+
+    if [ -n "${_debug}" ]; then
+        echo "MD5 target file = ${_md5_func_param_filename}"
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+    fi
+
+    if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+        echo "MD5 OK          : `basename ${_md5_func_param_filename}`"
+    else
+        echo "calc_md5        = ${_calc_md5}"
+        echo "expect_value    = ${_md5_func_param_expectation}"
+        func_error "MD5 ERROR       : ${_md5_func_param_filename}"
+    fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+    echo "$1"
+    # cleanup temp directory.
+    func_clean_tempdir
+    exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+    echo "cleanup temp directory"
+    rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+    # search package file
+    func_cmn_find_file $1 $3
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # search file
+    num=`find ${top_dir} -name $2 | wc -l`
+    if [ ${num} -eq 1 ]; then
+        _find_filename=`find ${top_dir} -name $2`
+    else
+        # same filename exists.
+        _find_filename=`find ${top_dir} -name $2 | grep Software`
+    fi
+
+    # set mode
+    if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+        _extract_mode=${_MODE_ZIP}
+    else
+        _extract_mode=${_MODE_TAR}
+    fi
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+    # search package file
+    func_cmn_find_file $1 $4
+    if [ -n "${_debug}" ]; then
+        echo ""
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    # MD5
+    # Get directory name
+    # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    # call func_cmn_md5_check
+    func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+    # set return value
+    _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function supports level1 packaging. Do not support "grp pkg in grp pkg".
+func_search_and_md5check_grp()
+{
+    # search group package @SRCDIR
+    func_cmn_find_file $1 $5
+    if [ -n "${_debug}" ]; then
+        echo "search group package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # extract group package @TMPWORK
+    func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+    cd ${_find_filename}
+    # check group pachage structure
+    # <Package name>_<version>/Package_Info.txt
+    top_dir=$(basename ${_find_filename})
+    top_dir=${top_dir%.*}
+
+    if [ ! -e ${top_dir}/Package_Info.txt ]; then
+        echo "grp package        = $1"
+        echo "single package     = $2"
+        func_error "ERROR: Package_Info.txt not found in Group package."
+    fi
+
+    # search single package @TMPWORK/TOPDIR/<Group Package name>/
+    func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+    if [ -n "${_debug}" ]; then
+        echo "search single package"
+        echo "FileName        = ${_find_filename}"
+        echo "Mode            = ${_extract_mode}"
+        echo ""
+    fi
+
+    if [ -z "${_find_filename}" ]; then
+        return
+    fi
+
+    # mv <single package> TMPWORK/.
+    mv ${_find_filename} ${TMPWORK}/.
+
+    # delete group package
+    rm -rf ${TMPWORK}/${top_dir}
+
+    # call search and md5check @TMPWORK
+    func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'${pkg_name}`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+            # rigid flag = TRUE. Not found = ERROR
+            if [ "X$2" = "X1" ]; then
+                return 0
+            fi
+        else
+            find_flag=1
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        copyfile_name=$(basename ${copyfile_name})
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # file search
+        func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # install
+            install -d $2
+            install -m 0644 ${_find_filename} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+#        <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+#       Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+#       It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+    find_flag=0
+
+    for i in $1
+    do
+        sw_name=`echo $i | cut -d "," -f 1`
+        pkg_name=`echo $i | cut -d "," -f 2`
+        copyfile_name=`echo $i | cut -d "," -f 3`
+        md5_val=`echo $i | cut -d "," -f 4`
+
+        # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+        if [ -z "${md5_val}" ]; then
+            md5_val=`eval echo '$_MD5_'$pkg_name`
+        else
+            md5_val=`eval echo '$_MD5_'${md5_val}`
+        fi
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "sw_name         = $sw_name"
+            echo "pkg_name        = $pkg_name"
+            echo "copyfile_name   = $copyfile_name"
+            echo "md5_val         = $md5_val"
+        fi
+
+        # seach & MD5 check
+        func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+        if [ -z "${_find_filename}" ]; then
+            echo "${sw_name} not found!"
+        else
+            find_flag=1
+
+            # Get directory name
+            # _find_filename = pkg file (full path). It is not copyfile.
+            top_dir=$(basename ${_find_filename})
+            top_dir=${top_dir%.*}
+
+            # install
+            install -d $2
+            install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+            echo "Installed $sw_name"
+            echo "                : ${pkg_name}"
+        fi
+    done
+
+    return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+    echo ""
+    echo "Copying for Graphic Packages"
+
+    copy_flag=0
+
+    for i in ${_gfx_list}
+    do
+        user_pkg_name=`echo $i | cut -d "," -f 1`
+        user_copyfile_name=`echo $i | cut -d "," -f 2`
+        user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+        kern_pkg_name=`echo $i | cut -d "," -f 3`
+        kern_copyfile_name=`echo $i | cut -d "," -f 4`
+        kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+        if [ -n "${_debug}" ]; then
+            echo ""
+            echo "user_pkg_name   = ${user_pkg_name}"
+            echo "user_copyfile_name= ${user_copyfile_name}"
+            echo "user_md5_val    = ${user_md5_val}"
+            echo "kern_pkg_name   = ${kern_pkg_name}"
+            echo "kern_copyfile_name= ${kern_copyfile_name}"
+            echo "kern_md5_val    = ${kern_md5_val}"
+        fi
+
+        # user module (file1)
+        func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+        if [ -z "${_find_filename}" ]; then
+            echo "${user_pkg_name} not found!"
+            continue
+        fi
+
+        file1_top_dir=${_extract_top_dir_name}
+        echo "file1 top       : ${file1_top_dir}"
+
+        # kernel module (file2)
+        func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+        # file1 exist, but file2 not exist
+        if [ -z "${_find_filename}" ]; then
+            func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+        fi
+
+        file2_top_dir=${_extract_top_dir_name}
+        echo "file2 top       : ${file2_top_dir}"
+
+        # Finally copy is performed
+        copy_flag=1
+        install -d ${_GFX_UM_INST_DIR}
+        install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_}
+        install -d ${_GFX_KM_INST_DIR}
+        install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+        echo "Installed GFX package"
+        echo "                : ${user_pkg_name}"
+        echo "                : ${kern_pkg_name}"
+        echo ""
+    done
+
+    if [ ${copy_flag} -eq 0 ]; then
+        return
+    fi
+
+    echo ""
+    echo "Packages for GFX module were found and copied."
+    echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+    # MD5 check: OMX Media Component Audio Common Library for Linux
+    func_list_search_and_md5check "${_audio_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "Audio Common Library not found!"
+        echo ""
+        return 0
+    fi
+
+    # MD5 check: audio library.
+    func_list_search_and_md5check "${_audio_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Audio library not found."
+        return 0
+    fi
+
+    # Add audio common library to list
+    _audio_list="${_audio_common_list} ${_audio_list}"
+
+    # Install omx common lib (if not installed)
+    func_install_omx_common
+
+    # Install Audio library packages
+    func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+    _audio_common_install=1
+
+    return 1
+}
+
+# For Audio library
+func_audio()
+{
+    echo ""
+    echo "Copying for Audio Common Packages"
+
+    _audio_common_install=0
+
+    # Audio requires OMX common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # Audio Library
+    func_audio_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Audio Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for Audio module were found and copied."
+    echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+    echo ""
+    echo "Copying for Audio M/W Packages"
+
+    # MD5 check
+    func_list_search_and_md5check "${_audio_mw_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "Packages for Audio M/W module were not found."
+        return 0
+    fi
+
+    # Install Audio M/W library packages
+    func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for Audio M/W module were found and copied."
+    echo /=======================================================/
+
+    return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+    if [ ${_omx_common_install} -eq 0 ]; then
+        echo ""
+        echo "Install for OMX Common Packages"
+        func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+        _omx_common_install=1
+    fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+    if [ ${_uvcs_install} -eq 0 ]; then
+        echo ""
+        echo "Installed UVCS driver"
+        func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+        _uvcs_install=1
+    fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+    echo ""
+    echo "Copying for Video Decoder Library Packages"
+
+    # MD5 check: Decoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_dec_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Decoder Common Library not found!"
+        return 0
+    fi
+
+    # MD5 check: Video Decoder Library
+    func_list_search_and_md5check "${_video_dec_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install OMX common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add video decoder common lib to list
+    _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+    _video_decoder_common_install=1
+
+    return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+    echo ""
+    echo "Copying for Video Encoder Library Packages"
+
+
+    # MD5 check Encoder Common Library (rigid flag=TRUE)
+    func_list_search_and_md5check "${_video_enc_common_list}" "1"
+    if [ $? -eq 0 ]; then
+        echo "OMX Video Encoder Common Library not found!"
+        return 0
+    fi
+    _video_encoder_common_install=0
+
+    # Video Encoder Library
+    # MD5 check
+    func_list_search_and_md5check "${_video_enc_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        return 0
+    fi
+
+    # install common lib (if not installed)
+    func_install_omx_common
+
+    # install UVCS driver (if not installed)
+    func_install_uvcs
+
+    # Add Video encoder common library to list
+    _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+    # install searched library
+    func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+    _video_encoder_common_install=1
+
+    return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+    echo ""
+    echo "Copying for Video Decoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Decoder
+    # Decoder common Lib
+    func_video_decoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Decoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video decoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+    echo ""
+    echo "Copying for Video Encoder Packages"
+
+    # OMX Common library
+    if [ ${_omx_common_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_omx_common_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "OMX Common Library not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "OMX Common Library already installed"
+    fi
+
+    # UVCS driver
+    if [ ${_uvcs_install} -eq 0 ]; then
+        # MD5 check (rigid flag=TRUE)
+        func_list_search_and_md5check "${_uvcs_list}" "1"
+        if [ $? -eq 0 ]; then
+            echo "UVCS driver not found!"
+            echo ""
+            return
+        fi
+    else
+        echo "UVCS driver already installed"
+    fi
+
+    # OMX Encoder
+    # Encoder common Lib
+    func_video_encoder_lib
+    if [ $? -eq 0 ]; then
+        echo ""
+        echo "Skip Video Encoder Packages"
+        echo ""
+        return
+    fi
+
+    echo ""
+    echo "Packages for video encoder module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV kernel module
+func_dtv_kern()
+{
+    echo ""
+    echo "Copying for DTV kernel module"
+
+    _dtv_kern_install=0
+
+    func_list_search_and_md5check "${_dtv_km_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV kernel library not found!"
+        return
+    fi
+
+    pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2`
+    copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3`
+
+    # extract --> archive --> copied
+    echo "Installed DTV kernel modules"
+    func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+    func_cmn_extract_archive "${_extract_mode}" "${_find_filename}"
+
+    dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv"
+    for i in ${dtv_driver_list}
+    do
+        tar cfz $i.tar.gz $i
+        install -d ${_DTV_KM_INST_DIR}
+        install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR}
+        echo "                : $i.tar.gz"
+    done
+
+    _dtv_kern_install=1
+
+    echo ""
+    echo "DTV kernel module were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV lib
+func_dtv_lib()
+{
+    echo ""
+    echo "Copying for DTV Library Packages"
+
+    # DTV kernel modules
+    if [ ${_dtv_kern_install} -eq 0 ]; then
+        echo "DTV kernel module not found!"
+        echo "Skip DTV Package"
+        echo ""
+        return
+    fi
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dtv_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DTV library not found"
+        return
+    fi
+
+    # install
+    func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}"
+
+    echo ""
+    echo "DTV Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DVD lib
+func_dvd_lib()
+{
+    echo ""
+    echo "Copying for DVD Library Packages"
+
+    # MD5 check (rigid flag=TRUE)
+    func_list_search_and_md5check "${_dvd_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo ""
+        echo "DVD library not found"
+        return
+    fi
+
+    index="1"
+    # install searched library
+    for i in ${_dvd_list}; do
+       install_dir=`echo ${_DVD_UM_INST_DIR} | cut -d " " -f ${index}`
+       func_list_search_and_install_wo_md5check ${i} ${install_dir}
+       index=`expr ${index} + 1`
+    done
+
+    echo ""
+    echo "DVD Package were found and copied."
+    echo /=======================================================/
+}
+
+# For DTV/DVD main routine
+func_dtv_dvd()
+{
+    echo ""
+    echo "Copying for DTV/DVD Packages"
+
+    # DTV package
+    func_dtv_kern
+    func_dtv_lib
+
+    # DVD package
+    func_dvd_lib
+}
+
+# For CMS main routine
+func_cms()
+{
+    echo ""
+    echo "Copying for CMS Packages"
+
+    copy_flag=0
+
+    # MD5 check
+    func_list_search_and_md5check "${_cms_list}"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip CMS package"
+        echo ""
+        return
+    fi
+
+    # Install library
+    func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for CMS were found and copied."
+    echo /=======================================================/
+}
+
+# For ADSP main routine
+func_adsp()
+{
+    echo ""
+    echo "Copying for ADSP Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ADSP, all files are necesarry
+    func_list_search_and_md5check "${_adsp_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_adsp_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ADSP Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ADSP were found and copied."
+    echo /=======================================================/
+}
+
+# For ICCOM main routine
+func_iccom()
+{
+    echo ""
+    echo "Copying for ICCOM Packages"
+
+    # MD5 check (rigid flag = TRUE)
+    # In ICCOM, all files are necesarry
+    func_list_search_and_md5check "${_iccom_km_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    func_list_search_and_md5check "${_iccom_um_list}" "1"
+    if [ $? -eq 0 ]; then
+        # library not found.
+        echo "Skip ICCOM Package"
+        echo ""
+        return
+    fi
+
+    # Install kernel module
+    func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}"
+
+    # Install user module
+    func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}"
+
+    echo ""
+    echo "Packages for ICCOM were found and copied."
+    echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+    echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+    exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+    usage
+    exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+    case "$1" in
+        -f|--force)
+            _no_md5check=1
+            ;;
+        -d|--debug)
+            _debug=1
+            ;;
+        *)
+            _src_dirname=$(basename $1)
+            _src_path=$(cd $(dirname $1) && pwd)
+            _src_full=${_src_path}/${_src_dirname}
+            ;;
+    esac
+    shift
+done
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+    echo "${_src_path}/${_src_dirname} not found."
+    usage
+    exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+    echo "src             = ${_src_dirname}"
+    echo "src_path        = ${_src_path}"
+    echo "src_full        = ${_src_full}"
+    echo "no_md5check     = ${_no_md5check}"
+    echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+    echo "ERROR: Work directory already exist."
+    exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+_dtv_kern_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+func_dtv_dvd
+func_cms
+func_adsp
+func_iccom
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
new file mode 100644
index 00000000..14a9cb74
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
@@ -0,0 +1,64 @@
+# GFX
+_MD5_RTM0RC7795GLPG0001SL41C=""
+_MD5_RCH3G001L4101ZDO=""
+_MD5_RTM0RC7796GLPG0001SL41C=""
+_MD5_RCM3G001L4101ZDO=""
+_MD5_RTM0RC7796GLPGB001SL41C=""
+_MD5_RCN3G001L4101ZDO=""
+_MD5_RTM0RC7799GLPG0001SL41C=""
+_MD5_RCE3G001L4101ZDO=""
+_MD5_INFRTM0RC7795GLPG0001SL41C=""
+_MD5_INFRTM0RC7796GLPG0001SL41C=""
+_MD5_INFRTM0RC7796GLPGB001SL41C=""
+_MD5_INFRTM0RC7799GLPG0001SL41C=""
+# OMX AUDIO
+_MD5_RTM0AC0000ADAACMZ1SL41C=""
+_MD5_RTM0AC0000XAAACD30SL41C=""
+_MD5_RTM0AC0000XACMND30SL41C=""
+_MD5_RTM0AC0000ADAAPMZ1SL41C=""
+_MD5_RTM0AC0000ADMP3MZ1SL41C=""
+_MD5_RTM0AC0000ADWMAMZ1SL41C=""
+_MD5_RTM0AC0000XAAAPD30SL41C=""
+_MD5_RTM0AC0000XAMP3D30SL41C=""
+_MD5_RTM0AC0000XAWMAD30SL41C=""
+_MD5_RTM0AC0000AEAACMZ1SL41C=""
+_MD5_RTM0AC0000XAAACE30SL41C=""
+_MD5_RTM0AC0000XAALAD30SL41C=""
+_MD5_RTM0AC0000XAFLAD30SL41C=""
+_MD5_RTM0AC0000XADD5D30SL41C=""
+_MD5_RTM0AC0000ADDD5MZ1SL41C=""
+# OMX VIDEO
+_MD5_RTM0AC0000XV263D30SL41C=""
+_MD5_RTM0AC0000XV264D30SL41C=""
+_MD5_RTM0AC0000XCMCTL30SL41C=""
+_MD5_RCG3VUDRL4101ZDO=""
+_MD5_RTM0AC0000XVCMND30SL41C=""
+_MD5_RTM0AC0000XV265D30SL41C=""
+_MD5_RTM0AC0000XVM2VD30SL41C=""
+_MD5_RTM0AC0000XVM4VD30SL41C=""
+_MD5_RTM0AC0000XVVC1D30SL41C=""
+_MD5_RTM0AC0000XVCMNE30SL41C=""
+_MD5_RTM0AC0000XV264E30SL41C=""
+_MD5_RTM0AC0000XVDVXD30SL41C=""
+_MD5_RTM0AC0000XVRLVD30SL41C=""
+_MD5_RTM0AC0000XVVP8D30SL41C=""
+_MD5_RTM0AC0000XVVP8E30SL41C=""
+_MD5_RTM0AC0000XVVP9D30SL41C=""
+# DTV/DVD
+_MD5_RCG3T001L4101ZDO=""
+_MD5_RTM0RC0000TE020000SL41C1=""
+_MD5_RTM0RC0000TE020000SL41C2=""
+_MD5_RTM0RC0000XDVDC301SL41C=""
+_MD5_RTM0RC0000XDVDF301SL41C=""
+# CMS
+_MD5_RTM0AC0000JRCMBCV0SL41C=""
+_MD5_RTM0AC0000JRCMBLC0SL41C=""
+_MD5_RTM0AC0000JRCMDGV0SL41C=""
+# ADSP
+_MD5_RCG3AHFWN0201ZDP=""
+_MD5_RCG3AHIFL4101ZDP=""
+_MD5_RCG3AHPDL4101ZDO=""
+# ICCOM
+_MD5_RCG3ZLIDL4101ZNO1=""
+_MD5_RCG3ZLIDL4101ZNO2=""
+_MD5_RCG3ZLILL4101ZNO=""
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
new file mode 100644
index 00000000..0ca10175
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
@@ -0,0 +1,186 @@
+From a217313adcfb331634c99be786b93516d38d943a Mon Sep 17 00:00:00 2001
+From: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
+Date: Tue, 24 Oct 2017 14:39:24 +0700
+Subject: [PATCH] rcar-gen3: Add readme for building with Linaro Gcc
+
+This patch add the dependent layer information, build instructions
+for using Linaro Gcc.
+
+Updated on Dec, 2016:
+- Add H3ULCB
+- Change supported branch from jethro to krogoth
+- Change Maintainer information.
+
+Updated on Oct, 2017:
+- Add M3N
+- Add M3ULCB
+- Add meta-optee layer
+
+Updated on Feb, 2018:
+- Add E3
+- Add elinux.org reference
+
+Signed-off-by: Phong Man Tran <phong.tran.wh@rvc.renesas.com>
+Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
+Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
+Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
+---
+ meta-rcar-gen3/README.linaro | 127 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 127 insertions(+)
+ create mode 100644 meta-rcar-gen3/README.linaro
+
+diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro
+new file mode 100644
+index 0000000..e1fe40a
+--- /dev/null
++++ b/meta-rcar-gen3/README.linaro
+@@ -0,0 +1,127 @@
++meta-rcar-gen3
++==============
++
++This layer provides that evaluation board is mounted ARM SoCs of Renesas
++Electronics, called the R-Car Generation 3. Currently, this supports
++board and the SoCs of the following:
++    - Board: Salvator-X   / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N)
++    - Board: R-Car Starter Kit premier(H3ULCB)   / SoC: R8A7795
++    - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796
++    - Board: Ebisu / SoC: R8A77990 (R-Car E3)
++
++Patches
++=======
++
++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
++Please see the MAINTAINERS file for more details.
++
++Dependencies
++============
++
++This layer depends on:
++
++    URI: git://git.yoctoproject.org/poky
++    layers: meta, meta-yocto, meta-yocto-bsp
++    branch: rocko
++
++    URI: https://git.linaro.org/openembedded/meta-linaro.git
++    layers: meta-linaro-toolchain, meta-optee
++    branch: rocko
++
++    URI: git://git.openembedded.org/meta-openembedded
++    layers: meta-oe
++    branch: rocko
++
++Build Instructions
++==================
++
++The following instructions require a Poky installation (or equivalent).
++
++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
++
++    $ source poky/oe-init-build-env
++
++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.:
++
++    BBLAYERS ?= " \
++        <path to layer>/poky/meta \
++        <path to layer>/poky/meta-yocto \
++        <path to layer>/poky/meta-yocto-bsp \
++        <path to layer>/meta-renesas/meta-rcar-gen3 \
++        <path to layer>/meta-linaro/meta-linaro-toolchain \
++        <path to layer>/meta-linaro/meta-optee \
++        <path to layer>/meta-openembedded/meta-oe \
++    "
++
++To build a specific target BSP, configure the associated machine in local.conf:
++
++    MACHINE ??= "<supported board name>"
++
++Select the SOC
++
++    For H3: r8a7795
++    SOC_FAMILY = "r8a7795"
++
++    For M3: r8a7796
++    SOC_FAMILY = "r8a7796"
++
++    For M3N: r8a77965
++    SOC_FAMILY = "r8a77965"
++
++    For E3: r8a77990
++    SOC_FAMILY = "r8a77990"
++    Already added in machine config: ebisu.conf
++
++Must Change the Gcc version in local.conf.
++
++    GCCVERSION="linaro-7.2"
++
++Configure for systemd init in local.conf:
++
++    DISTRO_FEATURES_append = " systemd"
++    VIRTUAL-RUNTIME_init_manager = "systemd"
++Configure for ivi-shell and ivi-extension
++
++   DISTRO_FEATURES_append = " ivi-shell"
++
++Configure for USB 3.0
++
++   MACHINE_FEATURES_append = " usb3"
++
++Enable tuning support for Capacity Aware migration Strategy (CAS)
++
++   MACHINE_FEATURES_append = " cas"
++
++Build the target file system image using bitbake:
++
++    $ bitbake core-image-minimal
++
++After completing the images for the target machine will be available in the output
++directory 'tmp/deploy/images/<supported board name>'.
++
++Images generated:
++    * Image (generic Linux Kernel binary image file)
++    * Image-<machine name>.dtb (DTB for target machine)
++    * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2)
++    * core-image-minimal-<machine name>.ext4  (rootfs ext4 format)
++
++Build Instructions for SDK
++==========================
++This may be changed in the near feature. These instructions are tentative.
++
++Should define the staticdev in SDK image feature for installing the static libs
++to SDK in local.conf.
++
++    SDKIMAGE_FEATURES_append = " staticdev-pkgs"
++
++Use bitbake -c populate_sdk for generating the toolchain SDK:
++For 64-bit target SDK (aarch64):
++
++    $ bitbake core-image-minimal -c populate_sdk
++
++The SDK can be found in the output directory 'tmp/deploy/sdk'
++    * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++Usage of toolchain SDK:
++Install the SDK to the default: /opt/poky/x.x
++(x.x is YP version, i.e. 2.1.)
++For 64-bit target SDK:
++
++    $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++For 64-bit application use environment script in /opt/poky/x.x
++
++    $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
++
++ULCB Information
++================
++Refer to the following for more information of ULCB:
++
++    http://elinux.org/R-Car
++
++The information on building and running Yocto on R-Car Generation 3
++=========================
++Refer to the following for more information:
++
++    https://elinux.org/R-Car/Boards/Yocto-Gen3
+-- 
+1.9.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/adsp-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/adsp-control.inc
new file mode 100644
index 00000000..44a8d146
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/adsp-control.inc
@@ -0,0 +1,2 @@
+# USE_ADSP for Audio DSP
+USE_ADSP = "${@bb.utils.contains('DISTRO_FEATURES', 'adsp', '1', '0', d)}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/arm-trusted-firmware-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/arm-trusted-firmware-control.inc
new file mode 100644
index 00000000..013598df
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/arm-trusted-firmware-control.inc
@@ -0,0 +1,58 @@
+# This function is to generate IPL binaries for H3/H3ULCB (SoC: r8a7795), E3 (SoC: r8a7790)
+
+# IPL build options for H3/E3/H3ULCB
+EXTRA_ATFW_OPT ?= ""
+EXTRA_ATFW_CONF ?= ""
+
+do_ipl_opt_compile () {
+    oe_runmake distclean
+    oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${EXTRA_ATFW_OPT} ${ATFW_OPT_LOSSY}
+}
+
+do_ipl_opt_deploy () {
+    install -d ${DEPLOYDIR}
+
+    # Copy IPL to deploy folder
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2/bl2.elf ${DEPLOYDIR}/bl2-${MACHINE}-${EXTRA_ATFW_CONF}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.bin ${DEPLOYDIR}/bl2-${MACHINE}-${EXTRA_ATFW_CONF}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.srec ${DEPLOYDIR}/bl2-${MACHINE}-${EXTRA_ATFW_CONF}.srec
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}-${EXTRA_ATFW_CONF}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}-${EXTRA_ATFW_CONF}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.srec ${DEPLOYDIR}/bl31-${MACHINE}-${EXTRA_ATFW_CONF}.srec
+    install -m 0644 ${S}/tools/dummy_create/bootparam_sa0.srec ${DEPLOYDIR}/bootparam_sa0-${EXTRA_ATFW_CONF}.srec
+    install -m 0644 ${S}/tools/dummy_create/cert_header_sa6.srec ${DEPLOYDIR}/cert_header_sa6-${EXTRA_ATFW_CONF}.srec
+}
+
+# For IPL compile options for H3/H3ULCB (SoC: r8a7795), E3 (SoC: r8a7790)
+python do_extra_ipl_opt() {
+    soc = d.getVar('SOC_FAMILY')
+    soc = soc.split(':')[1]
+    machine = d.getVar('MACHINE_ARCH')
+
+    if soc == "r8a7795":
+        # For H3 SiP DDR 4GiB (2GiB x 2ch)
+        if machine != "h3ulcb":
+            d.setVar('EXTRA_ATFW_CONF', '2x2g')
+            d.setVar('EXTRA_ATFW_OPT', ' LSI=H3 RCAR_DRAM_SPLIT=2 RCAR_DRAM_CHANNEL=5 ')
+            bb.build.exec_func('do_ipl_opt_compile', d)
+            bb.build.exec_func('do_ipl_opt_deploy', d)
+
+        # For H3/H3ULCB SiP DDR 8GiB (2GiB x 4ch)
+        d.setVar('EXTRA_ATFW_CONF', '4x2g')
+        d.setVar('EXTRA_ATFW_OPT', ' LSI=H3 RCAR_DRAM_SPLIT=1 ')
+        d.setVar('EXTRA_ATFW_OPT_append_ulcb', ' RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 ')
+        bb.build.exec_func('do_ipl_opt_compile', d)
+        bb.build.exec_func('do_ipl_opt_deploy', d)
+
+    # For E3 SiP DDR 2GiB
+    if soc == "r8a77990":
+        d.setVar('EXTRA_ATFW_CONF', '4d')
+        d.setVar('EXTRA_ATFW_OPT', ' LSI=E3 RCAR_SA0_SIZE=0 RCAR_AVS_SETTING_ENABLE=0 RCAR_DRAM_DDR3L_MEMCONF=1 RCAR_DRAM_DDR3L_MEMDUAL=1 ')
+        bb.build.exec_func('do_ipl_opt_compile', d)
+        bb.build.exec_func('do_ipl_opt_deploy', d)
+}
+
+do_ipl_opt_compile[dirs] = "${B}"
+do_ipl_opt_deploy[dirs] = "${B}"
+
+addtask extra_ipl_opt after do_configure before do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/avb-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/avb-control.inc
new file mode 100644
index 00000000..6ed7f536
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/avb-control.inc
@@ -0,0 +1,2 @@
+# USE_AVB for AVB Software Package for Linux
+USE_AVB = "${@'1' if 'avb' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cas-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cas-control.inc
new file mode 100644
index 00000000..18ccc74d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cas-control.inc
@@ -0,0 +1,17 @@
+SOC="${@d.getVar('SOC_FAMILY').split(':')[1]}"
+CAS="${@'1' if 'cas' in '${MACHINE_FEATURES}' else '0'}"
+
+# USE_CAS for H3 (SoC: r8a7795) or M3 (SoC: r8a7796)
+USE_CAS="${@'1' if '${CAS}' == '1' and ('${SOC}' == 'r8a7795' or '${SOC}' == 'r8a7796') else '0'}"
+
+# Trap incorrect CAS setting for M3N/E3
+WARN="${@'1' if '${CAS}' == '1' and '${USE_CAS}' == '0' else '0'}"
+
+# This function is to show a warning message when enabling CAS feature on M3N/E3
+python do_cas_checking() {
+    warn=d.getVar('WARN')
+    if warn == "1" :
+        bb.warn("CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796), this feature will be disabled automatically")
+}
+
+addtask cas_checking before do_configure after do_patch
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control.inc
new file mode 100644
index 00000000..e0decc73
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control.inc
@@ -0,0 +1,25 @@
+require include/checksum_control_files.inc
+
+python do_checksum_control() {
+    to_check_dico = d.getVarFlags("CTL_CHECKSUM")
+    if to_check_dico is None:
+        return 0
+
+    src_uri = (d.getVar('SRC_URI') or "").split()
+    for s in src_uri:
+        c_source=os.path.basename(s)
+        bb.note("Check source: %s " % (c_source))
+        if c_source in to_check_dico:
+            f_data = bb.fetch2.FetchData(s, d, True)
+            f_data.setup_localpath(d)
+            if os.path.exists(f_data.localpath):
+                mdr5_sum=bb.utils.md5_file(f_data.localpath)
+                mdr5_ctl=to_check_dico[c_source]
+                if mdr5_sum != mdr5_ctl:
+                    bb.fatal( "File %s hash should be %s but %s find, please update your driver files." % (c_source, mdr5_ctl, mdr5_sum))
+}
+
+do_checksum_control[doc] = "Do a checksum of the archives source files"
+do_checksum_control[vardeps] = "CTL_CHECKSUM"
+
+addtask do_checksum_control before do_unpack after do_fetch
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control_files.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control_files.inc
new file mode 100644
index 00000000..ff1f0093
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/checksum_control_files.inc
@@ -0,0 +1,15 @@
+CTL_CHECKSUM[r8a77951_linux_gsx_binaries_gles.tar.bz2]="40ef703b7b6bbd2931722810fe7ff46f"
+CTL_CHECKSUM[r8a77960_linux_gsx_binaries_gles.tar.bz2]="1cf07eae93757a5752d16cdc351a59eb"
+CTL_CHECKSUM[GSX_KM_H3.tar.bz2]="17e468c94e3669326637bbf7a893f70f"
+CTL_CHECKSUM[GSX_KM_M3.tar.bz2]="417d2eb2fdc9bf6abbc8a7ab8ac60793"
+CTL_CHECKSUM[RCG3VUDRL4101ZDO.tar.bz2]="43a8921d5c2a257ccc0bf491c737f5be"
+CTL_CHECKSUM[EVARTM0AC0000XCMCTL30SL41C.tar.bz2]="3714b73b8cc317372a22a8335c74e103"
+CTL_CHECKSUM[EVARTM0AC0000XV264D30SL41C.tar.bz2]="efcbb6493f61d714b64f6340503fa1d3"
+CTL_CHECKSUM[EVARTM0AC0000XV264E30SL41C.tar.bz2]="8b0480bcee569b53438ed79d166630fa"
+CTL_CHECKSUM[EVARTM0AC0000XVCMND30SL41C.tar.bz2]="691889ccf3bc295bdfdb5cf90d90bcaf"
+CTL_CHECKSUM[EVARTM0AC0000XVCMNE30SL41C.tar.bz2]="9dd7c067632385a5b071f96204766ac1"
+CTL_CHECKSUM[RTM0AC0000ADAACMZ1SL41C.tar.gz]="4e0bb98feeb1e309a2ec12c201bc16aa"
+CTL_CHECKSUM[RTM0AC0000AEAACMZ1SL41C.tar.gz]="414c5fc22bcf848b5a6eee3812874611"
+CTL_CHECKSUM[RTM0AC0000XAAACD30SL41C.tar.gz]="e44c10bd24372fc70013c2498c6869d3"
+CTL_CHECKSUM[RTM0AC0000XAAACE30SL41C.tar.gz]="1611375916d9e17cff19c34b83300c83"
+CTL_CHECKSUM[RTM0AC0000XACMND30SL41C.tar.gz]="6229f43b2260d194f663bceed16ca273"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cms-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cms-control.inc
new file mode 100644
index 00000000..2ebfa517
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/cms-control.inc
@@ -0,0 +1,18 @@
+# USE_CMSBCM for Basic Color Management Middleware for Linux
+USE_CMSBCM = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsbcm', '1', '0', d)}"
+
+# USE_CMSBLC for Backlight Control Middleware for Linux
+USE_CMSBLC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsblc', '1', '0', d)}"
+
+# USE_CMSDGC for Dynamic Gamma Correction Middleware for Linux
+USE_CMSDGC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsdgc', '1', '0', d)}"
+
+# CMS Flag list
+LIST_CMS_FLAG = " \
+    ${USE_CMSBCM} \
+    ${USE_CMSBLC} \
+    ${USE_CMSDGC} \
+"
+
+# USE_CMS for Color Management Middleware
+USE_CMS = "${@'1' if '1' in '${LIST_CMS_FLAG}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/dtv-dvd-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/dtv-dvd-control.inc
new file mode 100644
index 00000000..07c4d5f0
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/dtv-dvd-control.inc
@@ -0,0 +1,19 @@
+# USE_DTV for ISDB-T DTV Software Package
+USE_DTV = "${@'1' if 'dtv' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DVD for DVD Core-Middleware for Linux
+USE_DVD = "${@'1' if 'dvd' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DVD_ENCRYPTION_LIB for DVD Encryption Library for Linux
+USE_DVD_ENCRYPTION_LIB = "${@'1' if 'dvd_encryption_library' in '${DISTRO_FEATURES}' else '0'}"
+
+# This function to prevent build DTV feature with E3
+python do_dtv_checking () {
+    soc = d.getVar('SOC_FAMILY')
+    soc = soc.split(':')[1]
+    use_dtv = d.getVar('USE_DTV')
+    if use_dtv == "1" and soc == "r8a77990":
+        bb.fatal("E3 (SoC: r8a77990) does not support SSP, please disable DTV feature in your local configuration")
+}
+
+addtask dtv_checking before do_configure after do_patch
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/gles-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/gles-control.inc
new file mode 100644
index 00000000..045caa32
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/gles-control.inc
@@ -0,0 +1,6 @@
+USE_GLES = "${@'1' if 'gsx' in '${MACHINE_FEATURES}' else '0'}"
+USE_GLES_WAYLAND = \
+    "${@'1' if '${USE_GLES}' == '1' and 'wayland' in '${DISTRO_FEATURES}' else '0'}"
+USE_WAYLAND_IVI_SHELL = \
+    "${@'1' if 'ivi-shell' in '${DISTRO_FEATURES}' and \
+    'wayland' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/iccom-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/iccom-control.inc
new file mode 100644
index 00000000..bb8bd2cc
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/iccom-control.inc
@@ -0,0 +1,2 @@
+# USE_ICCOM for Linux ICCOM driver, Linux ICCOM library
+USE_ICCOM = "${@'1' if 'iccom' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/multimedia-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/multimedia-control.inc
new file mode 100644
index 00000000..beeabc15
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/multimedia-control.inc
@@ -0,0 +1,9 @@
+# USE_MULTIMEDIA for Renesas Multimedia package
+USE_MULTIMEDIA = "${@'1' if 'multimedia' in '${MACHINE_FEATURES}' else '0'}"
+USE_MULTIMEDIA_TP = "${@'1' if 'mm-test' in '${DISTRO_FEATURES}' else '0'}"
+
+# For wayland
+USE_WAYLAND = "${@'1' if 'wayland' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_V4L2_RENDERER for weston v4l2-renderer
+USE_V4L2_RENDERER = "${@'1' if 'v4l2-renderer' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/omx-control.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/omx-control.inc
new file mode 100644
index 00000000..69093e8f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/omx-control.inc
@@ -0,0 +1,156 @@
+## Additional configuration in OMX module, include
+# USE_H263D_OMX for OMX Media Component H263 OMX Library
+USE_H263D_OMX = "${@'1' if 'h263dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H264D_OMX for OMX Media Component H264 OMX Library
+USE_H264D_OMX = "${@'1' if 'h264dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H264E_OMX for OMX Media Component H264 Encoder Library
+USE_H264E_OMX = "${@'1' if 'h264enc_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_H265D_OMX for OMX Media Component H265 OMX Library
+USE_H265D_OMX = "${@'1' if 'h265dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MPEG2_OMX for OMX Media Component MPEG2 OMX Library
+USE_MPEG2D_OMX = "${@'1' if 'mpeg2dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MPEG4D_OMX for OMX Media Component MPEG4 Decoder Library
+USE_MPEG4D_OMX = "${@'1' if 'mpeg4dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_VC1D_OMX for OMX Media Component VC-1 Decoder Library
+USE_VC1D_OMX = "${@'1' if 'vc1dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DIVXD_OMX for OMX Media Component DivX Decoder Library
+USE_DIVXD_OMX = "${@'1' if 'divxdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_RVD_OMX for OMX Media Component RealVideo Decoder Library
+USE_RVD_OMX = "${@'1' if 'rvdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCD_OMX for OMX Media Component AACLC OMX Library
+USE_AACLCD_OMX = "${@'1' if 'aaclcdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACPV2D_OMX for OMX Media Component aacPlus V2 OMX Library
+USE_AACPV2D_OMX = "${@'1' if 'aacpv2dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MP3D_OMX for OMX Media Component MP3 OMX Library
+USE_MP3D_OMX = "${@'1' if 'mp3dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_WMAD_OMX for OMX Media Component WMA OMX Library
+USE_WMAD_OMX = "${@'1' if 'wmadec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_ALACD_OMX for OMX Media Component ALAC decoder Library
+USE_ALACD_OMX = "${@'1' if 'alacdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_FLACD_OMX for OMX Media Component FLAC decoder Library
+USE_FLACD_OMX = "${@'1' if 'flacdec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DDD_OMX for OMX Media Component Dolby(R) Digital decoder Library
+USE_DDD_OMX = "${@'1' if 'dddec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCE_OMX for OMX Media Component AAC-LC encoder Library
+USE_AACLCE_OMX = "${@'1' if 'aaclcenc_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLC_MDW for AACLC MDW Library
+USE_AACLC_MDW =  "${@'1' if 'aaclcdec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACPV2_MDW for aacPlus V2 MDW Library
+USE_AACPV2_MDW =  "${@'1' if 'aacpv2dec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_MP3_MDW for MP3 MDW Library
+USE_MP3_MDW =  "${@'1' if 'mp3dec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_WMA_MDW for WMA MDW Library
+USE_WMA_MDW =  "${@'1' if 'wmadec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_DD_MDW for Dolby(R) Digital MDW Library
+USE_DD_MDW =  "${@'1' if 'dddec_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_AACLCE_OMX for AAC-LC encoder middleware Library
+USE_AACLCE_MDW = "${@'1' if 'aaclcenc_mdw' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_VP8D_OMX for OMX Media Component VP8 Decoder Library
+USE_VP8D_OMX = "${@'1' if 'vp8dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_VP8E_OMX for OMX Media Component VP8 Encoder Library
+USE_VP8E_OMX = "${@'1' if 'vp8enc_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# USE_VP9D_OMX for OMX Media Component VP9 Decoder Library
+USE_VP9D_OMX = "${@'1' if 'vp9dec_lib' in '${DISTRO_FEATURES}' else '0'}"
+
+# This function is to make sure vp9dec_lib only build with M3N or E3
+# and warns user to build vp9dec_lib for M3 v3.0 only
+python () {
+    soc = d.getVar('SOC_FAMILY')
+    soc = soc.split(':')[1]
+    use_vp9d = d.getVar('USE_VP9D_OMX')
+    if use_vp9d == "1":
+        if soc != 'r8a77965' and soc != 'r8a77990':
+            if soc == 'r8a7796':
+                bb.warn("vp9dec_lib supports M3 v3.0 only, it does not work on other M3 versions.")
+            else:
+                bb.warn("vp9dec_lib only supports M3N (SoC: r8a77965), E3 (SoC: r8a77990), M3 v3.0 (SoC: r8a7796). Disabling.")
+                d.setVar('USE_VP9D_OMX', '0')
+}
+
+# OMX Video Decoder Flag list
+LIST_OMX_VIDEO_DEC_FLAG = " \
+    ${USE_H263D_OMX} \
+    ${USE_H264D_OMX} \
+    ${USE_H265D_OMX} \
+    ${USE_MPEG2D_OMX} \
+    ${USE_MPEG4D_OMX} \
+    ${USE_VC1D_OMX} \
+    ${USE_DIVXD_OMX} \
+    ${USE_RVD_OMX} \
+    ${USE_VP8D_OMX} \
+    ${USE_VP9D_OMX} \
+"
+
+# OMX Video Encoder Flag list
+LIST_OMX_VIDEO_ENC_FLAG = " \
+    ${USE_H264E_OMX} \
+    ${USE_VP8E_OMX} \
+"
+
+# OMX Audio Flag list (except MDW)
+LIST_OMX_AUDIO_FLAG = " \
+    ${USE_AACLCD_OMX} \
+    ${USE_AACPV2D_OMX} \
+    ${USE_MP3D_OMX} \
+    ${USE_WMAD_OMX} \
+    ${USE_AACLCE_OMX} \
+    ${USE_ALACD_OMX} \
+    ${USE_FLACD_OMX} \
+    ${USE_DDD_OMX} \
+"
+
+# Audio M/W Flag list
+LIST_AUDIO_MDW_FLAG = " \
+    ${USE_AACLC_MDW} \
+    ${USE_AACPV2_MDW} \
+    ${USE_MP3_MDW} \
+    ${USE_WMA_MDW} \
+    ${USE_DD_MDW} \
+    ${USE_AACLCE_MDW} \
+"
+
+# USE_OMX_VIDEO_DEC for Video Decoder Common Libs
+USE_VIDEO_DEC = "${@'1' if '1' in '${LIST_OMX_VIDEO_DEC_FLAG}' else '0'}"
+
+# USE_OMX_VIDEO_DEC for Video Encoder Common Libs
+USE_VIDEO_ENC = "${@'1' if '1' in '${LIST_OMX_VIDEO_ENC_FLAG}' else '0'}"
+
+# USE_VIDEO_OMX for Enable/Disable OMX Video
+USE_VIDEO_OMX = "${@'1' if '1' in '${USE_VIDEO_DEC} ${USE_VIDEO_ENC}' else '0'}"
+
+# USE_AUDIO_OMX for Audio Common Libs
+USE_AUDIO_OMX = "${@'1' if '1' in '${LIST_OMX_AUDIO_FLAG}' else '0'}"
+
+# USE_OMX_COMMON for OMX Common Libs
+USE_OMX_COMMON = "${@'1' if '1' in '${USE_VIDEO_OMX} ${USE_AUDIO_OMX}' else '0'}"
+
+# USE_OMX_USER_MODULE for OMX User Module
+# Note) List of USE_OMX_COMMON = {USE_VIDEO_OMX} + {USE_AUDIO_OMX}
+USE_OMX_USER_MODULE = "${@'1' if '1' in '${USE_OMX_COMMON} ${LIST_AUDIO_MDW_FLAG}' else '0'}"
+
+USE_OMX_EVA_PKG = "${@'1' if 'use_eva_pkg' in '${DISTRO_FEATURES}' else '0'}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-modules-common.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-modules-common.inc
new file mode 100644
index 00000000..7cd0845d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-modules-common.inc
@@ -0,0 +1,9 @@
+export BUILDDIR = "${STAGING_INCDIR}/.."
+export INCSHARED = "${STAGING_INCDIR}"
+export LIBSHARED = "${STAGING_LIBDIR}"
+export KERNELSRC = "${STAGING_KERNEL_DIR}"
+export CROSS_COMPILE = "${TARGET_PREFIX}"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+export LDFLAGS = ""
+export CP = "cp"
+require include/rcar-gen3-path-common.inc
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-path-common.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-path-common.inc
new file mode 100644
index 00000000..d3dcfffc
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/include/rcar-gen3-path-common.inc
@@ -0,0 +1 @@
+RENESAS_DATADIR ?= "/usr/local"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-benchmark/glmark2/glmark2_git.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-benchmark/glmark2/glmark2_git.bbappend
new file mode 100644
index 00000000..460c4b01
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-benchmark/glmark2/glmark2_git.bbappend
@@ -0,0 +1,2 @@
+PACKAGECONFIG[drm-gl] = ",,virtual/libgl libdrm libgbm"
+PACKAGECONFIG[drm-gles2] = ",,virtual/libgles2 libdrm libgbm"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
new file mode 100644
index 00000000..81f5cd98
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
@@ -0,0 +1,60 @@
+DESCRIPTION = "ARM Trusted Firmware"
+
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://license.rst;md5=e927e02bca647e14efd87e9e914b2443"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit deploy
+require include/multimedia-control.inc
+require include/arm-trusted-firmware-control.inc
+
+S = "${WORKDIR}/git"
+
+BRANCH = "rcar_gen3"
+SRC_URI = "git://github.com/renesas-rcar/arm-trusted-firmware.git;branch=${BRANCH}"
+SRCREV = "236f8fbb57af7f899980bbd5a03feb12d6462970"
+
+PV = "v1.5+renesas+git${SRCPV}"
+
+COMPATIBLE_MACHINE = "(salvator-x|ulcb|ebisu)"
+PLATFORM = "rcar"
+ATFW_OPT_LOSSY = "${@oe.utils.conditional("USE_MULTIMEDIA", "1", "RCAR_LOSSY_ENABLE=1", "", d)}"
+ATFW_OPT_r8a7795 = "LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_DRAM_LPDDR4_MEMCONF=0 ${ATFW_OPT_LOSSY}"
+ATFW_OPT_r8a7796 = "LSI=M3 RCAR_DRAM_SPLIT=2 ${ATFW_OPT_LOSSY}"
+ATFW_OPT_r8a77965 = "LSI=M3N ${ATFW_OPT_LOSSY}"
+ATFW_OPT_r8a77990 = "LSI=E3 RCAR_SA0_SIZE=0 RCAR_AVS_SETTING_ENABLE=0 RCAR_DRAM_DDR3L_MEMCONF=0 RCAR_DRAM_DDR3L_MEMDUAL=0"
+ATFW_OPT_append_ulcb = " RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0"
+
+# requires CROSS_COMPILE set by hand as there is no configure script
+export CROSS_COMPILE="${TARGET_PREFIX}"
+
+# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application
+CFLAGS[unexport] = "1"
+LDFLAGS[unexport] = "1"
+AS[unexport] = "1"
+LD[unexport] = "1"
+
+do_compile() {
+    oe_runmake distclean
+    oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${ATFW_OPT}
+}
+
+# do_install() nothing
+do_install[noexec] = "1"
+
+do_deploy() {
+    # Create deploy folder
+    install -d ${DEPLOYDIR}
+
+    # Copy IPL to deploy folder
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2/bl2.elf ${DEPLOYDIR}/bl2-${MACHINE}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.bin ${DEPLOYDIR}/bl2-${MACHINE}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl2.srec ${DEPLOYDIR}/bl2-${MACHINE}.srec
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}.elf
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}.bin
+    install -m 0644 ${S}/build/${PLATFORM}/release/bl31.srec ${DEPLOYDIR}/bl31-${MACHINE}.srec
+    install -m 0644 ${S}/tools/dummy_create/bootparam_sa0.srec ${DEPLOYDIR}/bootparam_sa0.srec
+    install -m 0644 ${S}/tools/dummy_create/cert_header_sa6.srec ${DEPLOYDIR}/cert_header_sa6.srec
+}
+addtask deploy before do_build after do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-Fix-for-teec_trace.c-snprintf-Werror-format-truncati.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-Fix-for-teec_trace.c-snprintf-Werror-format-truncati.patch
new file mode 100644
index 00000000..db8bdace
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-Fix-for-teec_trace.c-snprintf-Werror-format-truncati.patch
@@ -0,0 +1,28 @@
+From 30dd2986fb64aba7ee78d4e231c344e2c39d7999 Mon Sep 17 00:00:00 2001
+From: Simon Hughes <simon.hughes@arm.com>
+Date: Thu, 21 Jun 2018 17:22:23 +0100
+Subject: [PATCH] Fix for teec_trace.c snprintf -Werror=format-truncation=
+ error.
+
+Signed-off-by: Simon Hughes <simon.hughes@arm.com>
+---
+ libteec/src/teec_trace.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/libteec/src/teec_trace.c b/libteec/src/teec_trace.c
+index 78b79d6..c91bc43 100644
+--- a/libteec/src/teec_trace.c
++++ b/libteec/src/teec_trace.c
+@@ -106,7 +106,8 @@ int _dprintf(const char *function, int flen, int line, int level,
+ 		 */
+ 		int thread_id = syscall(SYS_gettid);	/* perf issue ? */
+ 
+-		snprintf(prefixed, MAX_PRINT_SIZE,
++		int len = 0;
++		len  = snprintf(prefixed+len, MAX_PRINT_SIZE,
+ 			 "%s [%d] %s:%s:%d: %s",
+ 			 trace_level_strings[level], thread_id, prefix, func,
+ 			 line, raw);
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-tee-supplicant-use-MMC_IOC_MULTI_CMD-for-RPMB-access.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-tee-supplicant-use-MMC_IOC_MULTI_CMD-for-RPMB-access.patch
new file mode 100644
index 00000000..fddc7fc1
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-tee-supplicant-use-MMC_IOC_MULTI_CMD-for-RPMB-access.patch
@@ -0,0 +1,208 @@
+From 04a72e88f768722edff453694e70535d36a8b1b4 Mon Sep 17 00:00:00 2001
+From: Hiroki Negishi <hiroki.negishi.bx@renesas.com>
+Date: Mon, 1 Apr 2019 13:10:57 +0900
+Subject: [PATCH] tee-supplicant: use MMC_IOC_MULTI_CMD for RPMB access
+
+To access RPMB, host should switch to RPMB partition.
+And in RPMB partition, host should finish RPMB sequence.
+
+In case of using MMC_IOC_CMD as RPMB ioctl, eMMC driver switches
+partition to user data area between WRITE command and READ command.
+This may cause General failure.
+In case of MMC_IOC_MULTI_CMD, eMMC driver keeps RPMB partition.
+
+This patch changes RPMB ioctl from MMC_IOC_CMD into MMC_IOC_MULTI_CMD
+and changes ioctl parameters according to mmc utils.
+
+Signed-off-by: Hiroki Negishi <hiroki.negishi.bx@renesas.com>
+---
+ tee-supplicant/src/rpmb.c | 120 +++++++++++++++++++++++-----------------------
+ 1 file changed, 61 insertions(+), 59 deletions(-)
+
+diff --git a/tee-supplicant/src/rpmb.c b/tee-supplicant/src/rpmb.c
+index cac9932..29da690 100644
+--- a/tee-supplicant/src/rpmb.c
++++ b/tee-supplicant/src/rpmb.c
+@@ -114,6 +114,7 @@ static pthread_mutex_t rpmb_mutex = PTHREAD_MUTEX_INITIALIZER;
+  */
+ 
+ #define MMC_BLOCK_MAJOR	179
++#define RPMB_MULTI_CMD_MAX_CMDS 3
+ 
+ /* mmc_ioc_cmd.opcode */
+ #define MMC_SEND_EXT_CSD		 8
+@@ -130,6 +131,9 @@ static pthread_mutex_t rpmb_mutex = PTHREAD_MUTEX_INITIALIZER;
+ 
+ #define MMC_CMD_ADTC	(1 << 5)	/* Addressed data transfer command */
+ 
++#define MMC_RSP_SPI_S1	(1 << 7)	/* one status byte */
++#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
++
+ /* mmc_ioc_cmd.write_flag */
+ #define MMC_CMD23_ARG_REL_WR	(1 << 31) /* CMD23 reliable write */
+ 
+@@ -610,26 +614,38 @@ static uint32_t read_ext_csd(int fd, uint8_t *ext_csd)
+ 	return TEEC_SUCCESS;
+ }
+ 
++static inline void set_single_cmd(struct mmc_ioc_cmd *ioc, __u32 opcode,
++				  int write_flag, unsigned int blocks)
++{
++	ioc->opcode = opcode;
++	ioc->write_flag = write_flag;
++	ioc->arg = 0x0;
++	ioc->blksz = 512;
++	ioc->blocks = blocks;
++	ioc->flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
++}
++
+ static uint32_t rpmb_data_req(int fd, struct rpmb_data_frame *req_frm,
+ 			      size_t req_nfrm, struct rpmb_data_frame *rsp_frm,
+ 			      size_t rsp_nfrm)
+ {
+-	int st;
++	int err;
+ 	size_t i;
+ 	uint16_t msg_type = ntohs(req_frm->msg_type);
+-	struct mmc_ioc_cmd cmd;
++	struct mmc_ioc_cmd *ioc;
++	struct mmc_ioc_multi_cmd *mioc;
++	struct rpmb_data_frame frame_status = {0};
+ 
+-	memset(&cmd, 0, sizeof(cmd));
+-	cmd.blksz = 512;
+-	cmd.blocks = req_nfrm;
+-	cmd.data_ptr = (uintptr_t)req_frm;
+-	cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+-	cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK;
+-	cmd.write_flag = 1;
++	mioc = (struct mmc_ioc_multi_cmd *)
++		malloc(sizeof(struct mmc_ioc_multi_cmd) +
++		       RPMB_MULTI_CMD_MAX_CMDS * sizeof(struct mmc_ioc_cmd));
++	if (!mioc)
++		return -ENOMEM;
+ 
+ 	for (i = 1; i < req_nfrm; i++) {
+ 		if (req_frm[i].msg_type != msg_type) {
+ 			EMSG("All request frames shall be of the same type");
++			free(mioc);
+ 			return TEEC_ERROR_BAD_PARAMETERS;
+ 		}
+ 	}
+@@ -642,77 +658,63 @@ static uint32_t rpmb_data_req(int fd, struct rpmb_data_frame *req_frm,
+ 	case RPMB_MSG_TYPE_REQ_AUTH_DATA_WRITE:
+ 		if (rsp_nfrm != 1) {
+ 			EMSG("Expected only one response frame");
++			free(mioc);
+ 			return TEEC_ERROR_BAD_PARAMETERS;
+ 		}
+ 
+-		/* Send write request frame(s) */
+-		cmd.write_flag |= MMC_CMD23_ARG_REL_WR;
+-		/*
+-		 * Black magic: tested on a HiKey board with a HardKernel eMMC
+-		 * module. When postsleep values are zero, the kernel logs
+-		 * random errors: "mmc_blk_ioctl_cmd: Card Status=0x00000E00"
+-		 * and ioctl() fails.
+-		 */
+-		cmd.postsleep_min_us = 20000;
+-		cmd.postsleep_max_us = 50000;
+-		st = IOCTL(fd, MMC_IOC_CMD, &cmd);
+-		if (st < 0)
+-			return TEEC_ERROR_GENERIC;
+-		cmd.postsleep_min_us = 0;
+-		cmd.postsleep_max_us = 0;
+-
+-		/* Send result request frame */
+-		memset(rsp_frm, 0, 1);
+-		rsp_frm->msg_type = htons(RPMB_MSG_TYPE_REQ_RESULT_READ);
+-		cmd.data_ptr = (uintptr_t)rsp_frm;
+-		cmd.write_flag &= ~MMC_CMD23_ARG_REL_WR;
+-		st = IOCTL(fd, MMC_IOC_CMD, &cmd);
+-		if (st < 0)
+-			return TEEC_ERROR_GENERIC;
+-
+-		/* Read response frame */
+-		cmd.opcode = MMC_READ_MULTIPLE_BLOCK;
+-		cmd.write_flag = 0;
+-		cmd.blocks = rsp_nfrm;
+-		st = IOCTL(fd, MMC_IOC_CMD, &cmd);
+-		if (st < 0)
+-			return TEEC_ERROR_GENERIC;
++		mioc->num_of_cmds = 3;
++
++		/* Write request */
++		ioc = &mioc->cmds[0];
++		set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, (1 << 31) | 1, 1);
++		mmc_ioc_cmd_set_data((*ioc), req_frm);
++
++		/* Result request */
++		ioc = &mioc->cmds[1];
++		frame_status.msg_type = htobe16(RPMB_MSG_TYPE_REQ_RESULT_READ);
++		set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, 1, 1);
++		mmc_ioc_cmd_set_data((*ioc), &frame_status);
++
++		/* Get response */
++		ioc = &mioc->cmds[2];
++		set_single_cmd(ioc, MMC_READ_MULTIPLE_BLOCK, 0, 1);
++		mmc_ioc_cmd_set_data((*ioc), rsp_frm);
++
+ 		break;
+ 
+ 	case RPMB_MSG_TYPE_REQ_WRITE_COUNTER_VAL_READ:
+ 		if (rsp_nfrm != 1) {
+ 			EMSG("Expected only one response frame");
++			free(mioc);
+ 			return TEEC_ERROR_BAD_PARAMETERS;
+ 		}
+ 
+ 		/* Fall through */
+ 	case RPMB_MSG_TYPE_REQ_AUTH_DATA_READ:
+-		if (req_nfrm != 1) {
+-			EMSG("Expected only one request frame");
+-			return TEEC_ERROR_BAD_PARAMETERS;
+-		}
++		mioc->num_of_cmds = 2;
++
++		/* Read request */
++		ioc = &mioc->cmds[0];
++		set_single_cmd(ioc, MMC_WRITE_MULTIPLE_BLOCK, 1, 1);
++		mmc_ioc_cmd_set_data((*ioc), req_frm);
++
++		/* Get response */
++		ioc = &mioc->cmds[1];
++		set_single_cmd(ioc, MMC_READ_MULTIPLE_BLOCK, 0, rsp_nfrm);
++		mmc_ioc_cmd_set_data((*ioc), rsp_frm);
+ 
+-		/* Send request frame */
+-		st = IOCTL(fd, MMC_IOC_CMD, &cmd);
+-		if (st < 0)
+-			return TEEC_ERROR_GENERIC;
+-
+-		/* Read response frames */
+-		cmd.data_ptr = (uintptr_t)rsp_frm;
+-		cmd.opcode = MMC_READ_MULTIPLE_BLOCK;
+-		cmd.write_flag = 0;
+-		cmd.blocks = rsp_nfrm;
+-		st = IOCTL(fd, MMC_IOC_CMD, &cmd);
+-		if (st < 0)
+-			return TEEC_ERROR_GENERIC;
+ 		break;
+ 
+ 	default:
+ 		EMSG("Unsupported message type: %d", msg_type);
++		free(mioc);
+ 		return TEEC_ERROR_GENERIC;
+ 	}
+ 
+-	return TEEC_SUCCESS;
++	err = ioctl(fd, MMC_IOC_MULTI_CMD, mioc);
++
++	free(mioc);
++	return err;
+ }
+ 
+ static uint32_t rpmb_get_dev_info(uint16_t dev_id, struct rpmb_dev_info *info)
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service
new file mode 100644
index 00000000..37fc4f75
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=optee services
+
+[Service]
+ExecStart=/usr/bin/tee-supplicant
+ExecStop=/usr/bin/killall -s KILL tee-supplicant
+
+[Install]
+WantedBy=multi-user.target
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb
new file mode 100644
index 00000000..960c6141
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb
@@ -0,0 +1,63 @@
+DESCRIPTION = "OP-TEE Client"
+LICENSE = "BSD-2-Clause"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=69663ab153298557a59c67a60a743e5b"
+PR = "r0"
+PV = "3.1.0+renesas+git${SRCPV}"
+BRANCH = "master"
+SRC_URI = "git://github.com/OP-TEE/optee_client.git;branch=${BRANCH}"
+SRCREV = "3f16662284a69fdec97b1712064be94d1fed7ae7"
+
+SRC_URI += " \
+    file://optee.service \
+    file://0001-Fix-for-teec_trace.c-snprintf-Werror-format-truncati.patch \
+    file://0001-tee-supplicant-use-MMC_IOC_MULTI_CMD-for-RPMB-access.patch \
+"
+
+inherit pythonnative systemd
+SYSTEMD_SERVICE_${PN} = "optee.service"
+
+COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb|m3nulcb|ebisu"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/git"
+
+# Recipe which fail to compile when enabling _FORTIFY_SOURCE=2 option
+SECURITY_CFLAGS_pn-optee-client = ""
+
+EXTRA_OEMAKE = "RPMB_EMU=0"
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 0755 ${S}/out/export/lib/libteec.so.1.0 ${D}/${libdir}
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -sf libteec.so.1.0 libteec.so.1
+    ln -sf libteec.so.1 libteec.so
+
+    # Install header files
+    install -m 0644 ${S}/out/export/include/* ${D}/${includedir}
+
+    # Install systemd service configure file for OP-TEE client
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}/${systemd_system_unitdir}
+        install -m 0644 ${WORKDIR}/optee.service ${D}/${systemd_system_unitdir}
+    fi
+}
+
+# install the tee-supplicant for 64 bit only.
+do_install_append_aarch64 () {
+    # Create destination directory
+    install -d ${D}/${bindir}
+
+    # Install binary to bindir
+    install -m 0755 ${S}/out/export/bin/tee-supplicant ${D}/${bindir}
+}
+
+RPROVIDES_${PN} += "optee-client"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os/0001-core-define-syscall_t-as-void-void.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os/0001-core-define-syscall_t-as-void-void.patch
new file mode 100644
index 00000000..bad7b27c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os/0001-core-define-syscall_t-as-void-void.patch
@@ -0,0 +1,75 @@
+From f6d17e33e7b95c90a2521cfd37cd5cb511909fc4 Mon Sep 17 00:00:00 2001
+From: Jerome Forissier <jerome.forissier@linaro.org>
+Date: Thu, 5 Jul 2018 13:07:52 +0200
+Subject: [PATCH] core: define syscall_t as void (*)(void)
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+syscall_t is currently typedef'ed as TEE_Result (*)(void). It is used to
+represent a pointer to any system call, in the syscall table for instance.
+As such, the exact type behind syscall_t cannot reflect all the syscalls
+since they have different prototypes. The current declaration with a
+TEE_Result return type was probably chosen because it was a common
+characteristic of all syscalls to return a TEE_Result.
+
+However, this type causes compilation warnings with GCC 8.1:
+
+core/arch/arm/tee/arch_svc.c:43:36: warning: cast between incompatible function types from ‘void (*)(long unsigned int)’ to ‘TEE_Result (*)(void)’ {aka ‘unsigned int (*)(void)’} [-Wcast-function-type]
+ #define SYSCALL_ENTRY(_fn) { .fn = (syscall_t)_fn }
+                                    ^
+core/arch/arm/tee/arch_svc.c:50:2: note: in expansion of macro ‘SYSCALL_ENTRY’
+  SYSCALL_ENTRY(syscall_sys_return),
+  ^~~~~~~~~~~~~
+
+The solution is to use 'void (*)(void)' instead, as explained in the GCC
+documentation:
+
+ -Wcast-function-type
+
+  Warn when a function pointer is cast to an incompatible function
+  pointer. [...] The function type void (*) (void) is special and matches
+  everything, which can be used to suppress this warning. [...]
+
+Link: [1] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
+Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
+Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
+---
+ core/arch/arm/tee/arch_svc.c         | 2 +-
+ core/arch/arm/tee/arch_svc_private.h | 7 +++++--
+ 2 files changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/core/arch/arm/tee/arch_svc.c b/core/arch/arm/tee/arch_svc.c
+index eb142ec..b2dd193 100644
+--- a/core/arch/arm/tee/arch_svc.c
++++ b/core/arch/arm/tee/arch_svc.c
+@@ -208,7 +208,7 @@ void __weak tee_svc_handler(struct thread_svc_regs *regs)
+ 	}
+ 
+ 	if (scn > TEE_SCN_MAX)
+-		scf = syscall_not_supported;
++		scf = (syscall_t)syscall_not_supported;
+ 	else
+ 		scf = tee_svc_syscall_table[scn].fn;
+ 
+diff --git a/core/arch/arm/tee/arch_svc_private.h b/core/arch/arm/tee/arch_svc_private.h
+index c0b3a73..695e733 100644
+--- a/core/arch/arm/tee/arch_svc_private.h
++++ b/core/arch/arm/tee/arch_svc_private.h
+@@ -7,8 +7,11 @@
+ 
+ #include <tee_api_types.h>
+ 
+-/* void argument but in reality it can be any number of arguments */
+-typedef TEE_Result (*syscall_t)(void);
++/*
++ * Generic "pointer to function" type. Actual syscalls take zero or more
++ * arguments and return TEE_Result.
++ */
++typedef void (*syscall_t)(void);
+ 
+ /* Helper function for tee_svc_handler() */
+ uint32_t tee_svc_do_call(struct thread_svc_regs *regs, syscall_t func);
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb
new file mode 100644
index 00000000..aeea185b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb
@@ -0,0 +1,65 @@
+DESCRIPTION = "OP-TEE OS"
+
+LICENSE = "BSD-2-Clause & BSD-3-Clause"
+LIC_FILES_CHKSUM = " \
+    file://LICENSE;md5=69663ab153298557a59c67a60a743e5b \
+    file://${WORKDIR}/git_official/LICENSE;md5=69663ab153298557a59c67a60a743e5b \
+"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit deploy pythonnative
+
+PV = "3.1.0+renesas+git${SRCPV}"
+
+BRANCH = "rcar_gen3"
+SRCREV_renesas = "19fb6dcbf42631f23afed406e893310eb30cd548"
+SRCREV_officialgit = "e77020396508fc086d7a4d6137388b116e4a662f"
+SRCREV_FORMAT = "renesas_officialgit"
+
+SRC_URI = " \
+    git://github.com/renesas-rcar/optee_os.git;branch=${BRANCH};name=renesas \
+    git://github.com/OP-TEE/optee_os.git;branch=master;name=officialgit;destsuffix=git_official \
+    file://0001-core-define-syscall_t-as-void-void.patch \
+"
+
+COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb|m3nulcb|ebisu)"
+PLATFORM = "rcar"
+
+DEPENDS = "python-pycrypto-native"
+
+export CROSS_COMPILE64="${TARGET_PREFIX}"
+
+# Let the Makefile handle setting up the flags as it is a standalone application
+LD[unexport] = "1"
+LDFLAGS[unexport] = "1"
+export CCcore="${CC}"
+export LDcore="${LD}"
+libdir[unexport] = "1"
+
+S = "${WORKDIR}/git"
+EXTRA_OEMAKE = "-e MAKEFLAGS="
+
+do_configure() {
+    git -C ${WORKDIR}/git_official checkout -B official 3.1.0
+    git -C ${WORKDIR}/git_official cherry-pick -n ${SRCREV_officialgit}
+    cp -rn ${WORKDIR}/git_official/core/lib/libtomcrypt ${B}/core/lib/.
+}
+
+do_compile() {
+    oe_runmake PLATFORM=${PLATFORM} CFG_ARM64_core=y
+}
+
+# do_install() nothing
+do_install[noexec] = "1"
+
+do_deploy() {
+    # Create deploy folder
+    install -d ${DEPLOYDIR}
+
+    # Copy TEE OS to deploy folder
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.elf ${DEPLOYDIR}/tee-${MACHINE}.elf
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.bin ${DEPLOYDIR}/tee-${MACHINE}.bin
+    install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.srec ${DEPLOYDIR}/tee-${MACHINE}.srec
+}
+addtask deploy before do_build after do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb
new file mode 100644
index 00000000..8fb0198f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb
@@ -0,0 +1,36 @@
+DESCRIPTION = "QOS Interface test app for R-Car Gen3"
+
+require qosif.inc
+
+DEPENDS = "qosif-user-module"
+PN = "qosif-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+QOSIF_TP_DIR = "qos_if-tp-user/files/qos_if"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_compile() {
+    cd ${S}/${QOSIF_TP_DIR}
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}${RENESAS_DATADIR}/bin/
+
+    # Copy user test program
+    install -m 755 ${S}/${QOSIF_TP_DIR}/qos_tp ${D}${RENESAS_DATADIR}/bin/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = "${RENESAS_DATADIR}/bin/qos_tp"
+
+FILES_${PN}-dbg = " \
+    ${RENESAS_DATADIR}/bin/.debug/* \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb
new file mode 100644
index 00000000..c836fe31
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb
@@ -0,0 +1,48 @@
+DESCRIPTION = "QOS Interface library for R-Car Gen3"
+
+require qosif.inc
+
+DEPENDS = "kernel-module-qos"
+PN = "qosif-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+QOSIF_LIB_DIR = "qos_if-module/files/qos_if"
+
+EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_compile() {
+    # Build shared library
+    cd ${S}/${QOSIF_LIB_DIR}/if
+    rm -rf ${S}/${QOSIF_LIB_DIR}/if/libqos.so*
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Copy shared library
+    install -m 755 ${S}/${QOSIF_LIB_DIR}/if/libqos.so* ${D}/${libdir}/
+    cd ${D}/${libdir}/
+    ln -sf libqos.so.1.0.0 libqos.so.1
+    ln -sf libqos.so.1 libqos.so
+
+    # Install shared header file
+    install -m 644 ${S}/${QOSIF_LIB_DIR}/include/qos_public.h ${D}/${includedir}/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = " \
+    ${libdir}/libqos.so* \
+"
+
+INSANE_SKIP_${PN} = "dev-so"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif.inc
new file mode 100644
index 00000000..0b6cf905
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/qos/qosif.inc
@@ -0,0 +1,15 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+QOSIF_LIB_URL = "git://github.com/renesas-rcar/qos_lib.git"
+BRANCH = "rcar-gen3"
+SRCREV = "84ea8d562a55d1fbd7b6acf08a498d33a92dc392"
+
+SRC_URI = "${QOSIF_LIB_URL};branch=${BRANCH}"
+
+# This module is machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2018.09.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2018.09.inc
new file mode 100644
index 00000000..f66ac8fb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2018.09.inc
@@ -0,0 +1,9 @@
+HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
+SECTION = "bootloaders"
+DEPENDS += "flex-native bison-native"
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=30503fd321432fc713238f582193b78e"
+PE = "1"
+
+S = "${WORKDIR}/git"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot.inc
new file mode 100644
index 00000000..48fbc572
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot.inc
@@ -0,0 +1,310 @@
+SUMMARY = "Universal Boot Loader for embedded devices"
+PROVIDES = "virtual/bootloader"
+
+B = "${WORKDIR}/build"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit uboot-config uboot-extlinux-config uboot-sign deploy
+
+DEPENDS += "swig-native python-native"
+
+EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'
+EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
+EXTRA_OEMAKE += 'PYTHON=nativepython STAGING_INCDIR=${STAGING_INCDIR_NATIVE} STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}'
+
+PACKAGECONFIG ??= "openssl"
+# u-boot will compile its own tools during the build, with specific
+# configurations (aka when CONFIG_FIT_SIGNATURE is enabled) openssl is needed as
+# a host build dependency.
+PACKAGECONFIG[openssl] = ",,openssl-native"
+
+# Allow setting an additional version string that will be picked up by the
+# u-boot build system and appended to the u-boot version.  If the .scmversion
+# file already exists it will not be overwritten.
+UBOOT_LOCALVERSION ?= ""
+
+# Some versions of u-boot use .bin and others use .img.  By default use .bin
+# but enable individual recipes to change this value.
+UBOOT_SUFFIX ??= "bin"
+UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
+UBOOT_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_SUFFIX}"
+UBOOT_MAKE_TARGET ?= "all"
+
+# Output the ELF generated. Some platforms can use the ELF file and directly
+# load it (JTAG booting, QEMU) additionally the ELF can be used for debugging
+# purposes.
+UBOOT_ELF ?= ""
+UBOOT_ELF_SUFFIX ?= "elf"
+UBOOT_ELF_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}"
+UBOOT_ELF_BINARY ?= "u-boot.${UBOOT_ELF_SUFFIX}"
+UBOOT_ELF_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_ELF_SUFFIX}"
+
+# Some versions of u-boot build an SPL (Second Program Loader) image that
+# should be packaged along with the u-boot binary as well as placed in the
+# deploy directory.  For those versions they can set the following variables
+# to allow packaging the SPL.
+SPL_BINARY ?= ""
+SPL_BINARYNAME ?= "${@os.path.basename(d.getVar("SPL_BINARY"))}"
+SPL_IMAGE ?= "${SPL_BINARYNAME}-${MACHINE}-${PV}-${PR}"
+SPL_SYMLINK ?= "${SPL_BINARYNAME}-${MACHINE}"
+
+# Additional environment variables or a script can be installed alongside
+# u-boot to be used automatically on boot.  This file, typically 'uEnv.txt'
+# or 'boot.scr', should be packaged along with u-boot as well as placed in the
+# deploy directory.  Machine configurations needing one of these files should
+# include it in the SRC_URI and set the UBOOT_ENV parameter.
+UBOOT_ENV_SUFFIX ?= "txt"
+UBOOT_ENV ?= ""
+UBOOT_ENV_BINARY ?= "${UBOOT_ENV}.${UBOOT_ENV_SUFFIX}"
+UBOOT_ENV_IMAGE ?= "${UBOOT_ENV}-${MACHINE}-${PV}-${PR}.${UBOOT_ENV_SUFFIX}"
+UBOOT_ENV_SYMLINK ?= "${UBOOT_ENV}-${MACHINE}.${UBOOT_ENV_SUFFIX}"
+
+# U-Boot EXTLINUX variables. U-Boot searches for /boot/extlinux/extlinux.conf
+# to find EXTLINUX conf file.
+UBOOT_EXTLINUX_INSTALL_DIR ?= "/boot/extlinux"
+UBOOT_EXTLINUX_CONF_NAME ?= "extlinux.conf"
+UBOOT_EXTLINUX_SYMLINK ?= "${UBOOT_EXTLINUX_CONF_NAME}-${MACHINE}-${PR}"
+
+do_compile () {
+	if [ "${@bb.utils.filter('DISTRO_FEATURES', 'ld-is-gold', d)}" ]; then
+		sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' ${S}/config.mk
+	fi
+
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+
+	if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ]
+	then
+		echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion
+		echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion
+	fi
+
+    if [ -n "${UBOOT_CONFIG}" ]
+    then
+        unset i j k
+        for config in ${UBOOT_MACHINE}; do
+            i=$(expr $i + 1);
+            for type in ${UBOOT_CONFIG}; do
+                j=$(expr $j + 1);
+                if [ $j -eq $i ]
+                then
+                    oe_runmake -C ${S} O=${B}/${config} ${config}
+                    oe_runmake -C ${S} O=${B}/${config} ${UBOOT_MAKE_TARGET}
+                    for binary in ${UBOOT_BINARIES}; do
+                        k=$(expr $k + 1);
+                        if [ $k -eq $i ]; then
+                            cp ${B}/${config}/${binary} ${B}/${config}/u-boot-${type}.${UBOOT_SUFFIX}
+                        fi
+                    done
+                    unset k
+                fi
+            done
+            unset  j
+        done
+        unset  i
+    else
+        oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
+        oe_runmake -C ${S} O=${B} ${UBOOT_MAKE_TARGET}
+    fi
+
+}
+
+do_install () {
+    if [ -n "${UBOOT_CONFIG}" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=$(expr $i + 1);
+            for type in ${UBOOT_CONFIG}; do
+                j=$(expr $j + 1);
+                if [ $j -eq $i ]
+                then
+                    install -d ${D}/boot
+                    install -m 644 ${B}/${config}/u-boot-${type}.${UBOOT_SUFFIX} ${D}/boot/u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${D}/boot/${UBOOT_BINARY}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${D}/boot/${UBOOT_BINARY}
+                fi
+            done
+            unset  j
+        done
+        unset  i
+    else
+        install -d ${D}/boot
+        install -m 644 ${B}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
+        ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
+    fi
+
+    if [ -n "${UBOOT_ELF}" ]
+    then
+        if [ -n "${UBOOT_CONFIG}" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=$(expr $i + 1);
+                for type in ${UBOOT_CONFIG}; do
+                    j=$(expr $j + 1);
+                    if [ $j -eq $i ]
+                    then
+                        install -m 644 ${B}/${config}/${UBOOT_ELF} ${D}/boot/u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${D}/boot/${UBOOT_BINARY}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${D}/boot/${UBOOT_BINARY}
+                    fi
+                done
+                unset j
+            done
+            unset i
+        else
+            install -m 644 ${B}/${UBOOT_ELF} ${D}/boot/${UBOOT_ELF_IMAGE}
+            ln -sf ${UBOOT_ELF_IMAGE} ${D}/boot/${UBOOT_ELF_BINARY}
+        fi
+    fi
+
+    if [ -e ${WORKDIR}/fw_env.config ] ; then
+        install -d ${D}${sysconfdir}
+        install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+    fi
+
+    if [ -n "${SPL_BINARY}" ]
+    then
+        if [ -n "${UBOOT_CONFIG}" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=$(expr $i + 1);
+                for type in ${UBOOT_CONFIG}; do
+                    j=$(expr $j + 1);
+                    if [ $j -eq $i ]
+                    then
+                         install -m 644 ${B}/${config}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}-${type}-${PV}-${PR}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${D}/boot/${SPL_BINARYNAME}-${type}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${D}/boot/${SPL_BINARYNAME}
+                    fi
+                done
+                unset  j
+            done
+            unset  i
+        else
+            install -m 644 ${B}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}
+            ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARYNAME}
+        fi
+    fi
+
+    if [ -n "${UBOOT_ENV}" ]
+    then
+        install -m 644 ${WORKDIR}/${UBOOT_ENV_BINARY} ${D}/boot/${UBOOT_ENV_IMAGE}
+        ln -sf ${UBOOT_ENV_IMAGE} ${D}/boot/${UBOOT_ENV_BINARY}
+    fi
+
+    if [ "${UBOOT_EXTLINUX}" = "1" ]
+    then
+        install -Dm 0644 ${UBOOT_EXTLINUX_CONFIG} ${D}/${UBOOT_EXTLINUX_INSTALL_DIR}/${UBOOT_EXTLINUX_CONF_NAME}
+    fi
+
+}
+
+FILES_${PN} = "/boot ${sysconfdir}"
+
+do_deploy () {
+    if [ -n "${UBOOT_CONFIG}" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=$(expr $i + 1);
+            for type in ${UBOOT_CONFIG}; do
+                j=$(expr $j + 1);
+                if [ $j -eq $i ]
+                then
+                    install -d ${DEPLOYDIR}
+                    install -m 644 ${B}/${config}/u-boot-${type}.${UBOOT_SUFFIX} ${DEPLOYDIR}/u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX}
+                    cd ${DEPLOYDIR}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_SYMLINK}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_SYMLINK}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_BINARY}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_BINARY}
+                fi
+            done
+            unset  j
+        done
+        unset  i
+    else
+        install -d ${DEPLOYDIR}
+        install -m 644 ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
+        cd ${DEPLOYDIR}
+        rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK}
+        ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
+        ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY}
+    fi
+
+    if [ -n "${UBOOT_ELF}" ]
+    then
+        if [ -n "${UBOOT_CONFIG}" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=$(expr $i + 1);
+                for type in ${UBOOT_CONFIG}; do
+                    j=$(expr $j + 1);
+                    if [ $j -eq $i ]
+                    then
+                        install -m 644 ${B}/${config}/${UBOOT_ELF} ${DEPLOYDIR}/u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}
+                    fi
+                done
+                unset j
+            done
+            unset i
+        else
+            install -m 644 ${B}/${UBOOT_ELF} ${DEPLOYDIR}/${UBOOT_ELF_IMAGE}
+            ln -sf ${UBOOT_ELF_IMAGE} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}
+            ln -sf ${UBOOT_ELF_IMAGE} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}
+        fi
+    fi
+
+
+     if [ -n "${SPL_BINARY}" ]
+     then
+        if [ -n "${UBOOT_CONFIG}" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=$(expr $i + 1);
+                for type in ${UBOOT_CONFIG}; do
+                    j=$(expr $j + 1);
+                    if [ $j -eq $i ]
+                    then
+                        install -m 644 ${B}/${config}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}-${type}-${PV}-${PR}
+                        rm -f ${DEPLOYDIR}/${SPL_BINARYNAME} ${DEPLOYDIR}/${SPL_SYMLINK}-${type}
+                        ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_BINARYNAME}-${type}
+                        ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_BINARYNAME}
+                        ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_SYMLINK}-${type}
+                        ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_SYMLINK}
+                    fi
+                done
+                unset  j
+            done
+            unset  i
+        else
+            install -m 644 ${B}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}
+            rm -f ${DEPLOYDIR}/${SPL_BINARYNAME} ${DEPLOYDIR}/${SPL_SYMLINK}
+            ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARYNAME}
+            ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK}
+        fi
+    fi
+
+
+    if [ -n "${UBOOT_ENV}" ]
+    then
+        install -m 644 ${WORKDIR}/${UBOOT_ENV_BINARY} ${DEPLOYDIR}/${UBOOT_ENV_IMAGE}
+        rm -f ${DEPLOYDIR}/${UBOOT_ENV_BINARY} ${DEPLOYDIR}/${UBOOT_ENV_SYMLINK}
+        ln -sf ${UBOOT_ENV_IMAGE} ${DEPLOYDIR}/${UBOOT_ENV_BINARY}
+        ln -sf ${UBOOT_ENV_IMAGE} ${DEPLOYDIR}/${UBOOT_ENV_SYMLINK}
+    fi
+
+    if [ "${UBOOT_EXTLINUX}" = "1" ]
+    then
+        install -m 644 ${UBOOT_EXTLINUX_CONFIG} ${DEPLOYDIR}/${UBOOT_EXTLINUX_SYMLINK}
+        ln -sf ${UBOOT_EXTLINUX_SYMLINK} ${DEPLOYDIR}/${UBOOT_EXTLINUX_CONF_NAME}-${MACHINE}
+        ln -sf ${UBOOT_EXTLINUX_SYMLINK} ${DEPLOYDIR}/${UBOOT_EXTLINUX_CONF_NAME}
+    fi
+}
+
+addtask deploy before do_build after do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2018.09.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2018.09.bb
new file mode 100644
index 00000000..da155ce2
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2018.09.bb
@@ -0,0 +1,43 @@
+require u-boot-common_${PV}.inc
+require u-boot.inc
+
+DEPENDS += "bc-native dtc-native"
+
+UBOOT_URL = "git://github.com/renesas-rcar/u-boot.git"
+BRANCH = "v2018.09/rcar-3.9.5"
+
+SRC_URI = "${UBOOT_URL};branch=${BRANCH}"
+SRCREV = "33049e0f28708289ade19d09a51ba278f6ddbe1c"
+PV = "v2018.09+git${SRCPV}"
+
+UBOOT_SREC_SUFFIX = "srec"
+UBOOT_SREC ?= "u-boot-elf.${UBOOT_SREC_SUFFIX}"
+UBOOT_SREC_IMAGE ?= "u-boot-elf-${MACHINE}-${PV}-${PR}.${UBOOT_SREC_SUFFIX}"
+UBOOT_SREC_SYMLINK ?= "u-boot-elf-${MACHINE}.${UBOOT_SREC_SUFFIX}"
+
+do_deploy_append() {
+    if [ -n "${UBOOT_CONFIG}" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=$(expr $i + 1);
+            for type in ${UBOOT_CONFIG}; do
+                j=$(expr $j + 1);
+                if [ $j -eq $i ]
+                then
+                    type=${type#*_}
+                    install -m 644 ${B}/${config}/${UBOOT_SREC} ${DEPLOYDIR}/u-boot-elf-${type}-${PV}-${PR}.${UBOOT_SREC_SUFFIX}
+                    cd ${DEPLOYDIR}
+                    ln -sf u-boot-elf-${type}-${PV}-${PR}.${UBOOT_SREC_SUFFIX} u-boot-elf-${type}.${UBOOT_SREC_SUFFIX}
+                fi
+            done
+            unset j
+        done
+        unset i
+    else
+        install -m 644 ${B}/${UBOOT_SREC} ${DEPLOYDIR}/${UBOOT_SREC_IMAGE}
+        cd ${DEPLOYDIR}
+        rm -f ${UBOOT_SREC} ${UBOOT_SREC_SYMLINK}
+        ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC_SYMLINK}
+        ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC}
+    fi
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb
new file mode 100644
index 00000000..ed4401f8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb
@@ -0,0 +1,58 @@
+DESCRIPTION = "Linux ICCOM library test applications for Renesas R-Car Gen3"
+
+require iccom-user-module.inc
+require include/multimedia-control.inc
+require include/rcar-gen3-path-common.inc
+
+DEPENDS = " \
+    kernel-module-iccom-mfis \
+    iccom-user-module \
+    ${@oe.utils.conditional('USE_MULTIMEDIA', '1', 'mmngr-user-module', '', d )} \
+"
+
+export USE_MMNGR="${USE_MULTIMEDIA}"
+
+PN = "iccom-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/libiccom"
+
+do_compile() {
+    cd ${S}/sample_test
+    make
+
+    cd ${S}/sample_test_fatal
+    make
+
+    cd ${S}/sample_sharedmem
+    make
+
+    cd ${S}/sample_lock
+    make
+
+    cd ${S}/sample_pvconv
+    make
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}${RENESAS_DATADIR}/bin
+
+    # Install test applications
+    install -m 755 ${S}/sample_test/sample_test ${D}${RENESAS_DATADIR}/bin/
+    install -m 755 ${S}/sample_test_fatal/sample_test_fatal ${D}${RENESAS_DATADIR}/bin/
+    install -m 755 ${S}/sample_sharedmem/sample_sharedmem ${D}${RENESAS_DATADIR}/bin/
+    install -m 755 ${S}/sample_lock/sample_lock ${D}${RENESAS_DATADIR}/bin/
+    install -m 755 ${S}/sample_pvconv/sample_pvconv ${D}${RENESAS_DATADIR}/bin/
+}
+
+FILES_${PN} = " \
+    ${RENESAS_DATADIR}/bin/sample_test \
+    ${RENESAS_DATADIR}/bin/sample_test_fatal \
+    ${RENESAS_DATADIR}/bin/sample_sharedmem \
+    ${RENESAS_DATADIR}/bin/sample_lock \
+    ${RENESAS_DATADIR}/bin/sample_pvconv \
+"
+
+# Skip debug split
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb
new file mode 100644
index 00000000..d943f0c7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb
@@ -0,0 +1,43 @@
+DESCRIPTION = "Linux ICCOM library for Renesas R-Car Gen3"
+
+require iccom-user-module.inc
+require include/rcar-gen3-path-common.inc
+
+DEPENDS = " \
+    kernel-module-iccom-mfis \
+"
+
+PN = "iccom-user-module"
+PR = "r0"
+
+# log output level : INFO=0 LOW=1 MED=2 HIGH=3 ERROR=4 FATAL=5 NONE=255
+# (the setting of 4 means that ERROR and FATAL log are output)
+export MEG_LEV="4"
+
+S = "${WORKDIR}/libiccom"
+B = "${S}/source"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_install() {
+    # Create destination directories
+    install -d ${D}/${libdir}
+    install -d ${D}${RENESAS_DATADIR}/include
+
+    # Install library
+    install -m 755 ${B}/libiccom.so ${D}/${libdir}/
+
+    # Install shared header file
+    install -m 644 ${S}/include/iccom_if_app.h ${D}${RENESAS_DATADIR}/include/
+}
+
+FILES_${PN} = " \
+    ${libdir}/libiccom.so \
+"
+
+FILES_${PN}-dev = " \
+    ${RENESAS_DATADIR}/include/iccom_if_app.h \
+"
+
+# Skip debug split
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc
new file mode 100644
index 00000000..96caa778
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc
@@ -0,0 +1,8 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=442d4e9f738ff4d05ae6215ae20caa6c"
+
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://libiccom.tar.bz2"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend
new file mode 100644
index 00000000..3381aa56
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend
@@ -0,0 +1,5 @@
+require include/rcar-gen3-path-common.inc
+
+do_install_append () {
+    echo "export LD_LIBRARY_PATH=\"\${LD_LIBRARY_PATH}:${RENESAS_DATADIR}/lib\"" >> ${D}${sysconfdir}/profile
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend
new file mode 100644
index 00000000..b1bd1233
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend
@@ -0,0 +1 @@
+require recipes-graphics/images/core-image-renesas-base.inc
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/ncurses/ncurses_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/ncurses/ncurses_%.bbappend
new file mode 100644
index 00000000..7efa4695
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/ncurses/ncurses_%.bbappend
@@ -0,0 +1,2 @@
+# nativesdk don't generally look in base_libdir
+base_libdir_class-nativesdk = "${libdir}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend
new file mode 100644
index 00000000..84eca35f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend
@@ -0,0 +1,6 @@
+# In YP2.1.2, nativesdk-wayland is lacking.
+RDEPENDS_${PN}_append = " \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'nativesdk-wayland nativesdk-wayland-dev', '', d)} \
+    nativesdk-perl nativesdk-perl-dev \
+    nativesdk-perl-modules \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend
new file mode 100644
index 00000000..f414a2b3
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend
@@ -0,0 +1 @@
+PACKAGECONFIG_remove = "timesyncd"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend
new file mode 100644
index 00000000..f06b4519
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend
@@ -0,0 +1,4 @@
+require include/gles-control.inc
+DEPENDS_append = " \
+    ${@'gles-user-module libgbm' if '${USE_GLES_WAYLAND}' == '1'  else ''} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/0001-configure.ac-Allow-explicit-enabling-of-cunit-tests.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/0001-configure.ac-Allow-explicit-enabling-of-cunit-tests.patch
new file mode 100644
index 00000000..bf526370
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/0001-configure.ac-Allow-explicit-enabling-of-cunit-tests.patch
@@ -0,0 +1,56 @@
+From e6bd4205b0b546afe991ae6f72256645f4404ad4 Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Date: Mon, 5 Sep 2016 14:41:37 +0300
+Subject: [PATCH libdrm] configure.ac: Allow explicit enabling of cunit tests
+
+Add --with-cunit to make it easier to do reproducible builds. Default
+is still to probe cunit and build opportunistically.
+
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Upstream-Status: Submitted [mailing list]
+---
+ configure.ac | 14 ++++++++++++--
+ 1 file changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index e3048c7..918d21d 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -137,6 +137,12 @@ AC_ARG_ENABLE(install-test-programs,
+ 		  [Install test programs (default: no)]),
+ 		  [INSTALL_TESTS=$enableval], [INSTALL_TESTS=no])
+ 
++AC_ARG_WITH([cunit],
++            [AS_HELP_STRING([--with-cunit],
++                            [Build tests that use cunit (default: auto)])],
++            [],
++            [with_cunit=auto])
++
+ dnl ===========================================================================
+ dnl check compiler flags
+ AC_DEFUN([LIBDRM_CC_TRY_FLAG], [
+@@ -372,7 +378,7 @@ if test "x$RADEON" = xyes; then
+ 	AC_DEFINE(HAVE_RADEON, 1, [Have radeon support])
+ fi
+ 
+-if test "x$AMDGPU" != xno; then
++if test "x$with_cunit" != xno -a "x$AMDGPU" != xno; then
+ 	# Detect cunit library
+ 	PKG_CHECK_MODULES([CUNIT], [cunit >= 2.1], [have_cunit=yes], [have_cunit=no])
+ 	# If pkg-config does not find cunit, check it using AC_CHECK_LIB.  We
+@@ -399,7 +406,11 @@ if test "x$AMDGPU" = xyes; then
+ 	AC_DEFINE(HAVE_CUNIT, [test "x$have_cunit" != "xno"], [Enable CUNIT Have amdgpu support])
+ 
+ 	if test "x$have_cunit" = "xno"; then
+-		AC_MSG_WARN([Could not find cunit library. Disabling amdgpu tests])
++		if test "x$with_cunit" = "xyes"; then
++			AC_MSG_ERROR([Could not find cunit library but --with-cunit was given])
++		elif test "x$with_cunit" = "xauto"; then
++			AC_MSG_WARN([Could not find cunit library. Disabling amdgpu tests])
++		fi
+ 	fi
+ fi
+ 
+-- 
+2.1.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch
new file mode 100644
index 00000000..4708bf1e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch
@@ -0,0 +1,24 @@
+drmdevice.c: define _GNU_SOURCE
+
+Include config.h to fix this build error with uclibc:
+
+libdrm-2.4.66/tests/drmdevice.c: In function 'main':
+libdrm-2.4.66/tests/drmdevice.c:96:60: error:
+'O_CLOEXEC' undeclared (first use in this function)
+fd = open(devices[i]->nodes[j],O_RDONLY | O_CLOEXEC, 0);
+
+Upstream-Status: Pending
+
+Signed-off-by: Maxin B. John <maxin.john@intel.com>
+---
+diff -Naur libdrm-2.4.66-orig/tests/drmdevice.c libdrm-2.4.66/tests/drmdevice.c
+--- libdrm-2.4.66-orig/tests/drmdevice.c	2016-02-23 11:34:02.054904502 +0200
++++ libdrm-2.4.66/tests/drmdevice.c	2016-02-23 11:35:34.371750383 +0200
+@@ -21,6 +21,7 @@
+  *
+  */
+ 
++#include <config.h>
+ #include <errno.h>
+ #include <stdio.h>
+ #include <stdlib.h>
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch
new file mode 100644
index 00000000..ec1fb023
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch
@@ -0,0 +1,25 @@
+From 5c6eb43c2f6e7f2ee7c25c92e42f4e4403fa0527 Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <jussi.kukkonen@intel.com>
+Date: Tue, 21 Feb 2017 14:37:52 +0200
+Subject: [PATCH] tests: also install test apps
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Yu Ke <ke.yu@intel.com>
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+---
+ tests/Makefile.am | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/tests/Makefile.am b/tests/Makefile.am
+index 0355a92..b4882cd 100644
+--- a/tests/Makefile.am
++++ b/tests/Makefile.am
+@@ -45,3 +45,4 @@ TESTS = \
+ check_PROGRAMS = \
+ 	$(TESTS) \
+ 	drmdevice
++bin_PROGRAMS = $(check_PROGRAMS)
+-- 
+2.1.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.85.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.85.bb
new file mode 100644
index 00000000..4e3e8efc
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.85.bb
@@ -0,0 +1,51 @@
+SUMMARY = "Userspace interface to the kernel DRM services"
+DESCRIPTION = "The runtime library for accessing the kernel DRM services.  DRM \
+stands for \"Direct Rendering Manager\", which is the kernel portion of the \
+\"Direct Rendering Infrastructure\" (DRI).  DRI is required for many hardware \
+accelerated OpenGL drivers."
+HOMEPAGE = "http://dri.freedesktop.org"
+SECTION = "x11/base"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://xf86drm.c;beginline=9;endline=32;md5=c8a3b961af7667c530816761e949dc71"
+PROVIDES = "drm"
+DEPENDS = "libpthread-stubs libpciaccess"
+
+SRC_URI = "http://dri.freedesktop.org/libdrm/${BP}.tar.bz2 \
+           file://installtests.patch \
+           file://fix_O_CLOEXEC_undeclared.patch \
+           file://0001-configure.ac-Allow-explicit-enabling-of-cunit-tests.patch \
+          "
+
+SRC_URI[md5sum] = "7aa540aeea4a1f3d1e9b0828f1772543"
+SRC_URI[sha256sum] = "64e4cd87eaee38ae60b2984ef02b66159b9bdd33030040db2a04339cf15f6173"
+
+inherit autotools pkgconfig manpages
+
+EXTRA_OECONF += "--disable-cairo-tests \
+                 --without-cunit \
+                 --enable-omap-experimental-api \
+                 --enable-etnaviv-experimental-api \
+                 --enable-install-test-programs \
+                 --disable-valgrind \
+                "
+PACKAGECONFIG[manpages] = "--enable-manpages, --disable-manpages, libxslt-native xmlto-native"
+
+ALLOW_EMPTY_${PN}-drivers = "1"
+PACKAGES =+ "${PN}-tests ${PN}-drivers ${PN}-radeon ${PN}-nouveau ${PN}-omap \
+             ${PN}-intel ${PN}-exynos ${PN}-kms ${PN}-freedreno ${PN}-amdgpu \
+             ${PN}-etnaviv"
+
+RRECOMMENDS_${PN}-drivers = "${PN}-radeon ${PN}-nouveau ${PN}-omap ${PN}-intel \
+                             ${PN}-exynos ${PN}-freedreno ${PN}-amdgpu \
+                             ${PN}-etnaviv"
+
+FILES_${PN}-tests = "${bindir}/*"
+FILES_${PN}-radeon = "${libdir}/libdrm_radeon.so.*"
+FILES_${PN}-nouveau = "${libdir}/libdrm_nouveau.so.*"
+FILES_${PN}-omap = "${libdir}/libdrm_omap.so.*"
+FILES_${PN}-intel = "${libdir}/libdrm_intel.so.*"
+FILES_${PN}-exynos = "${libdir}/libdrm_exynos.so.*"
+FILES_${PN}-kms = "${libdir}/libkms*.so.*"
+FILES_${PN}-freedreno = "${libdir}/libdrm_freedreno.so.*"
+FILES_${PN}-amdgpu = "${libdir}/libdrm_amdgpu.so.*"
+FILES_${PN}-etnaviv = "${libdir}/libdrm_etnaviv.so.*"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb
new file mode 100644
index 00000000..cb7cc20a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb
@@ -0,0 +1,132 @@
+require include/gles-control.inc
+require include/rcar-gen3-path-common.inc
+require include/checksum_control.inc
+
+DESCRIPTION = "PowerVR GPU user module"
+LICENSE = "CLOSED"
+
+PN = "gles-user-module"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796|r8a77965|r8a77990)"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/rogue"
+GLES = "gsx"
+
+SRC_URI_r8a7795 = "file://r8a77951_linux_gsx_binaries_gles.tar.bz2"
+SRC_URI_r8a7796 = "file://r8a77960_linux_gsx_binaries_gles.tar.bz2"
+SRC_URI_r8a77965 = "file://r8a77965_linux_gsx_binaries_gles.tar.bz2"
+SRC_URI_r8a77990 = "file://r8a77990_linux_gsx_binaries_gles.tar.bz2"
+
+SRC_URI_append = " \
+    file://change-shell.patch \
+    file://rc.pvr.service \
+"
+
+inherit update-rc.d systemd
+
+INITSCRIPT_NAME = "pvrinit"
+INITSCRIPT_PARAMS = "start 7 5 2 . stop 62 0 1 6 ."
+SYSTEMD_SERVICE_${PN} = "rc.pvr.service"
+
+do_populate_lic[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    # Install configuration files
+    install -d ${D}${sysconfdir}/init.d
+    install -m 644 ${S}/etc/powervr.ini ${D}${sysconfdir}
+    install -m 755 ${S}/etc/init.d/rc.pvr ${D}${sysconfdir}/init.d/pvrinit
+    install -m 755 ${S}/etc/init.d/rc.pvr ${D}${sysconfdir}/init.d/
+    install -d ${D}${sysconfdir}/udev/rules.d
+    install -m 644 ${S}/etc/udev/rules.d/72-pvr-seat.rules ${D}${sysconfdir}/udev/rules.d/
+
+    # Install header files
+    install -d ${D}${includedir}/EGL
+    install -m 644 ${S}/usr/include/EGL/*.h ${D}${includedir}/EGL/
+    install -d ${D}${includedir}/GLES2
+    install -m 644 ${S}/usr/include/GLES2/*.h ${D}${includedir}/GLES2/
+    install -d ${D}${includedir}/GLES3
+    install -m 644 ${S}/usr/include/GLES3/*.h ${D}${includedir}/GLES3/
+    install -d ${D}${includedir}/KHR
+    install -m 644 ${S}/usr/include/KHR/khrplatform.h ${D}${includedir}/KHR/khrplatform.h
+
+    # Install pre-builded binaries
+    install -d ${D}${libdir}
+    install -m 755 ${S}/usr/lib/*.so ${D}${libdir}/
+    install -d ${D}${RENESAS_DATADIR}/bin
+    install -m 755 ${S}/usr/local/bin/dlcsrv_REL ${D}${RENESAS_DATADIR}/bin/dlcsrv_REL
+    install -d ${D}/lib/firmware
+    install -m 644 ${S}/lib/firmware/* ${D}/lib/firmware/
+
+    # Install pkgconfig
+    install -d ${D}${libdir}/pkgconfig
+    install -m 644 ${S}/usr/lib/pkgconfig/*.pc ${D}${libdir}/pkgconfig/
+
+    # Create symbolic link
+    cd ${D}${libdir}
+    ln -s libEGL.so libEGL.so.1
+    ln -s libGLESv2.so libGLESv2.so.2
+
+    if [ "${USE_GLES_WAYLAND}" = "1" ]; then
+        # Set the "WindowSystem" parameter for wayland
+        if [ "${GLES}" = "gsx" ]; then
+            sed -i -e "s/WindowSystem=libpvrDRM_WSEGL.so/WindowSystem=libpvrWAYLAND_WSEGL.so/g" \
+                ${D}${sysconfdir}/powervr.ini
+        fi
+    fi
+
+    # Install systemd service
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)} ; then
+        install -d ${D}${systemd_system_unitdir}/
+        install -m 644 ${WORKDIR}/rc.pvr.service ${D}${systemd_system_unitdir}/
+        install -d ${D}${exec_prefix}/bin
+        install -m 755 ${S}/etc/init.d/rc.pvr ${D}${exec_prefix}/bin/pvrinit
+    fi
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    ${sysconfdir}/* \
+    ${libdir}/* \
+    /lib/firmware/rgx.fw* \
+    ${RENESAS_DATADIR}/bin/* \
+    ${exec_prefix}/bin/* \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir}/* \
+    ${libdir}/pkgconfig/* \
+"
+
+PROVIDES = "virtual/libgles2"
+RPROVIDES_${PN} += " \
+    ${GLES}-user-module \
+    libgles2-mesa \
+    libgles2-mesa-dev \
+    libgles2 \
+    libgles2-dev \
+"
+
+RDEPENDS_${PN} = " \
+    kernel-module-gles \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \
+"
+
+INSANE_SKIP_${PN} = "ldflags build-deps file-rdeps"
+INSANE_SKIP_${PN}-dev = "ldflags build-deps file-rdeps"
+INSANE_SKIP_${PN} += "arch"
+INSANE_SKIP_${PN}-dev += "arch"
+INSANE_SKIP_${PN}-dbg = "arch"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch
new file mode 100644
index 00000000..f6025709
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch
@@ -0,0 +1,10 @@
+Index: rogue/etc/init.d/rc.pvr
+===================================================================
+--- rogue.orig/etc/init.d/rc.pvr
++++ rogue/etc/init.d/rc.pvr
+@@ -1,4 +1,4 @@
+-#!/bin/bash
++#!/bin/sh
+ ############################################################################ ###
+ # File rc.pvr
+ # Copyright Copyright (C) 2013-2016 Renesas Electronics Corporation
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service
new file mode 100644
index 00000000..da7fc300
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=PowerVR consumer services
+Before=weston.service
+
+[Service]
+ExecStart=/usr/bin/pvrinit start
+ExecStop=/usr/bin/pvrinit stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=weston.service
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc
new file mode 100644
index 00000000..67615b17
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc
@@ -0,0 +1,67 @@
+require include/iccom-control.inc
+
+# Basic packages
+IMAGE_INSTALL_append = " \
+    bash \
+    v4l-utils \
+    i2c-tools \
+    libx11-locale \
+    coreutils \
+"
+
+# Support secure environment
+IMAGE_INSTALL_append = " \
+    optee-client \
+"
+
+# Add overrides for selection 32 bit or 64 bit target
+OVERRIDES .= ":${TARGET_SYS}"
+
+# Qos user packages only supports 64bit.
+QOS_USER_PKGS = ""
+QOS_USER_PKGS_aarch64-poky-linux = " \
+    qosif-user-module \
+    qosif-tp-user-module \
+"
+
+# Installation for QoS packages
+IMAGE_INSTALL_append = " \
+    kernel-module-qos \
+    ${QOS_USER_PKGS} \
+"
+
+# Renesas Basic packages for 32bit
+BASIC_32BIT_PKGS = " \
+    lib32-coreutils \
+    lib32-libstdc++ \
+    lib32-optee-client \
+"
+
+# Installation for 32bit packages
+IMAGE_INSTALL_append = " \
+    ${@oe.utils.conditional("USE_32BIT_PKGS", "1", "${BASIC_32BIT_PKGS}", "", d)} \
+"
+
+# Kernel modules of ICCOM
+ICCOM_KERNEL_PKGS = " \
+    kernel-module-iccom-mfis \
+    kernel-module-iccom-hwspinlock-sample \
+"
+
+# User modules of ICCOM only supports 64bit
+ICCOM_USER_PKGS = ""
+ICCOM_USER_PKGS_aarch64-poky-linux = " \
+    iccom-user-module \
+    iccom-tp-user-module \
+"
+
+# ICCOM Packages
+ICCOM_PKGS = " \
+    ${ICCOM_KERNEL_PKGS} \
+    ${ICCOM_USER_PKGS} \
+"
+
+# Installation for ICCOM Packages
+IMAGE_INSTALL_append = " \
+    ${@oe.utils.conditional("USE_ICCOM", "1", " ${ICCOM_PKGS}", "", d)} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc
new file mode 100644
index 00000000..88062204
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc
@@ -0,0 +1,102 @@
+require include/multimedia-control.inc
+require include/cms-control.inc
+require include/adsp-control.inc
+require include/dtv-dvd-control.inc
+require include/avb-control.inc
+require include/omx-control.inc
+
+# Common Multi Media Packages (MMP)
+MULTIMEDIA_PKGS = " \
+    packagegroup-multimedia-kernel-modules \
+    packagegroup-multimedia-libs \
+"
+
+# MMP test Packages
+MULTIMEDIA_TP_PKGS = " \
+    vspmif-tp-user-module \
+"
+
+# OMX MMP Packages
+OMX_MULTIMEDIA_PKGS = " \
+    omx-user-module \
+"
+
+# CMS MMP Packages
+CMS_MULTIMEDIA_PKGS = " \
+    cms-user-module \
+"
+
+# Kernel modules of DTV
+DTV_KERNEL_PKGS = " \
+    kernel-module-scu-src \
+    kernel-module-ssp \
+    kernel-module-tddmac \
+    kernel-module-tsif \
+"
+
+# DTV Packages
+DTV_PKGS = " \
+    ${DTV_KERNEL_PKGS} \
+    dtv-user-module \
+"
+
+# DVD Packages
+DVD_PKGS = " \
+    dvd-user-module \
+"
+
+# DVD Encryption Library packages
+DVD_ENCRYPTION_PKGS = " \
+    dvd-encryption-module \
+"
+
+# ADSP Packages
+ADSP_PKGS = " \
+    kernel-module-xtensa-hifi \
+    adsp-if-module \
+    adsp-fw-module \
+"
+
+# Kernel modules of AVB
+AVB_KERNEL_PKGS = " \
+    kernel-module-avb-streaming \
+    kernel-module-avb-mch \
+    kernel-module-avb-mse \
+"
+
+# AVB Packages
+AVB_PKGS = " \
+    ${AVB_KERNEL_PKGS} \
+    avbtool \
+    linuxptp \
+    openavnu-mrpd \
+    openavnu-gptp \
+    openavnu-maap \
+    avb-demoapps-avblauncher \
+    avb-demoapps-mrpdummy \
+    avb-demoapps-simple \
+"
+
+# Renesas MMP 32bit packages
+MMP_32BIT_PKGS = " \
+    ${@oe.utils.conditional("USE_MULTIMEDIA", "1", "lib32-packagegroup-multimedia-libs lib32-omx-user-module", "", d)} \
+    ${@oe.utils.conditional("USE_MULTIMEDIA_TP", "1", "lib32-vspmif-tp-user-module", "", d)} \
+    ${@oe.utils.conditional("USE_CMS", "1", "lib32-cms-user-module", "", d)} \
+    ${@oe.utils.conditional("USE_DTV", "1", "lib32-dtv-user-module", "", d)} \
+    ${@oe.utils.conditional("USE_DVD", "1", "lib32-dvd-user-module", "", d)} \
+    ${@oe.utils.conditional("USE_ADSP", "1", "lib32-adsp-if-module", "", d)} \
+"
+
+# Install pkg selection
+IMAGE_INSTALL_append = " \
+    ${@oe.utils.conditional("USE_MULTIMEDIA", "1", " ${MULTIMEDIA_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_MULTIMEDIA_TP", "1", " ${MULTIMEDIA_TP_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_OMX_USER_MODULE", "1", " ${OMX_MULTIMEDIA_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_CMS", "1", " ${CMS_MULTIMEDIA_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_DTV", "1", " ${DTV_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_DVD", "1", " ${DVD_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_DVD_ENCRYPTION_LIB", "1", " ${DVD_ENCRYPTION_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_ADSP", "1", " ${ADSP_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_AVB", "1", " ${AVB_PKGS}", "", d)} \
+    ${@oe.utils.conditional("USE_32BIT_MMP", "1", " ${MMP_32BIT_PKGS}", "", d)} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb
new file mode 100644
index 00000000..fd4e6a09
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb
@@ -0,0 +1,15 @@
+require recipes-graphics/images/core-image-weston.bb
+require core-image-renesas-base.inc
+require core-image-weston.inc
+
+DESCRIPTION = "Image with weston support that includes everything within \
+core-image-weston plus meta-toolchain, development headers and libraries to \
+form a standalone SDK."
+
+IMAGE_FEATURES += " \
+    dev-pkgs tools-sdk \
+    tools-debug debug-tweaks \
+    ssh-server-openssh \
+"
+
+IMAGE_INSTALL_append = " kernel-devsrc ltp"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend
new file mode 100644
index 00000000..e30bc2e0
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend
@@ -0,0 +1,2 @@
+require core-image-renesas-base.inc
+require core-image-weston.inc
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc
new file mode 100644
index 00000000..eb4f1b81
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc
@@ -0,0 +1,15 @@
+require include/gles-control.inc
+require core-image-renesas-mmp-base.inc
+
+# Gstreamer Packages
+GSTREAMER_PKGS = "packagegroup-gstreamer1.0-plugins"
+
+# Install packages for Wayland Env
+# default: Basic packages, Gstreamer packages
+# optional: GFX packages
+IMAGE_INSTALL_append = " \
+    ${GSTREAMER_PKGS} \
+    packagegroup-wayland-community \
+    packagegroup-graphics-renesas-proprietary \
+    packagegroup-graphics-renesas-wayland \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc
new file mode 100644
index 00000000..0aa77e03
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc
@@ -0,0 +1,24 @@
+# FIXME: can not override PACKAGECONFIG.
+PACKAGECONFIG[gles] = "--enable-gles1 --disable-gles2"
+PACKAGECONFIG[egl] = "--enable-egl --with-egl-platforms=wayland"
+
+# Disable the gbm modules of mesa
+PACKAGECONFIG_remove = "gbm"
+
+# Remove the gbm and egl packages. These are provided in other recipes.
+PACKAGES_remove = " \
+    libgbm-dev libgbm \
+    libegl-mesa-dev libegl-mesa \
+    libegl-dev libegl \
+    libgles2-mesa libgles2-mesa-dev \
+    libwayland-egl libwayland-egl-dev \
+"
+
+do_install_append() {
+    # Remove libegl-mesa modules and headers
+    rm -f ${D}/${libdir}/libEGL.la
+    rm -f ${D}/${libdir}/libEGL.so*
+    rm -f ${D}/${libdir}/pkgconfig/egl.pc
+    rm -rf ${D}/${includedir}/EGL
+    rm -rf ${D}/${includedir}/KHR
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend
new file mode 100644
index 00000000..022144ef
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend
@@ -0,0 +1,10 @@
+require include/gles-control.inc
+
+def map_libs(d):
+    if oe.utils.conditional('USE_GLES_WAYLAND', "1", "1", "0", d) == "1":
+        return "wayland"
+
+    return "dummy"
+
+MESATARGET := "${@map_libs(d)}"
+include mesa-${MESATARGET}.inc
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb
new file mode 100644
index 00000000..cc37f8ef
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb
@@ -0,0 +1,37 @@
+SUMMARY = "Renesas package group for Weston"
+LICENSE = "CLOSED & MIT"
+
+inherit packagegroup
+require include/gles-control.inc
+
+PACKAGES = " \
+    packagegroup-wayland-community \
+    packagegroup-graphics-renesas-proprietary \
+    packagegroup-graphics-renesas-wayland \
+"
+
+PR = "r0"
+
+RDEPENDS_packagegroup-wayland-community = " \
+    wayland \
+    weston \
+    weston-examples \
+    alsa-utils \
+    alsa-tools \
+    libdrm-tests \
+    libdrm-kms \
+"
+
+RDEPENDS_packagegroup-graphics-renesas-proprietary = " \
+    ${@bb.utils.contains('USE_GLES', '1', \
+    'kernel-module-gles gles-user-module' , \
+    '', d)} \
+"
+
+DEPENDS_packagegroup-graphics-renesas-wayland = "libegl"
+
+RDEPENDS_packagegroup-graphics-renesas-wayland = " \
+    ${@bb.utils.contains('USE_GLES_WAYLAND', '1', \
+    'libgbm libgbm-dev wayland-kms', \
+    '', d)} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb
new file mode 100644
index 00000000..0bde4ae7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb
@@ -0,0 +1,19 @@
+SUMMARY = "Recipe for libegl"
+LICENSE = "CLOSED"
+
+DEPENDS = "gles-user-module \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \
+"
+
+PR = "r0"
+
+RDEPENDS_${PN} = " \
+    gles-user-module \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \
+"
+
+PROVIDES = "virtual/egl"
+RPROVIDES_${PN} += " \
+    libegl \
+    libegl1 \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb
new file mode 100644
index 00000000..0f89c667
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb
@@ -0,0 +1,36 @@
+SUMMARY = "gbm library"
+LICENSE = "MIT"
+SECTION = "libs"
+
+LIC_FILES_CHKSUM = " \
+    file://gbm.c;beginline=4;endline=22;md5=5cdaac262c876e98e47771f11c7036b5"
+
+SRCREV = "71806a392f351f9b99ab1489587c8ca6f9fbe10f"
+SRC_URI = "git://github.com/renesas-rcar/libgbm;branch=match-mesa-17.3.6"
+
+S = "${WORKDIR}/git"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796|r8a77965|r8a77990)"
+DEPENDS = "wayland-kms udev"
+
+inherit autotools pkgconfig
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = " \
+    ${libdir}/libgbm.so.* \
+    ${libdir}/gbm/libgbm_kms.so.* \
+    ${libdir}/gbm/*.so \
+    ${libdir}/*.so \
+"
+FILES_${PN}-dev += "${libdir}/gbm/*.la"
+FILES_${PN}-dbg += "${libdir}/gbm/.debug/*"
+FILES_${PN}-staticdev += "${libdir}/gbm/*.a"
+
+INSANE_SKIP_${PN} += "dev-so"
+PROVIDES += "virtual/libgbm"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb
new file mode 100644
index 00000000..134e8d2e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb
@@ -0,0 +1,25 @@
+SUMMARY = "KMS library for Wayland"
+LICENSE = "MIT"
+
+LIC_FILES_CHKSUM = " \
+    file://wayland-kms.c;beginline=6;endline=24;md5=5cdaac262c876e98e47771f11c7036b5"
+
+PV_append = "+git${SRCREV}"
+
+SRCREV = "15184e5bd3701938a6b30b8f03b471477fc742e8"
+SRC_URI = "git://github.com/renesas-rcar/wayland-kms.git;branch=rcar-gen3"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796|r8a77965|r8a77990)"
+S = "${WORKDIR}/git"
+DEPENDS = "libdrm wayland gles-user-module wayland-native"
+
+inherit autotools pkgconfig
+
+FILES_${PN} = "${libdir}/libwayland-kms.so.*"
+FILES_${PN}-dev = " \
+    ${libdir}/libwayland-kms.la \
+    ${libdir}/libwayland-kms.so \
+    ${libdir}/pkgconfig/* \
+    ${includedir}/* \
+"
+FILES_${PN}-staticdev += "${libdir}/libwayland-kms.a"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf.bbappend
new file mode 100644
index 00000000..179651bf
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf.bbappend
@@ -0,0 +1,34 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI = " \
+    file://weston.ini \
+    file://weston.sh \
+"
+
+do_install_append() {
+    install -d ${D}/${sysconfdir}/xdg/weston
+    # install weston.ini as sample settings of gl-renderer
+    install -m 644 ${WORKDIR}/weston.ini ${D}/${sysconfdir}/xdg/weston/
+
+    # Checking for ivi-shell configuration
+    # If ivi-shell is enable, we will add its configs to weston.ini
+    if [ "X${USE_WAYLAND_IVI_SHELL}" = "X1" ]; then
+        sed -i '/repaint-window=34/c\repaint-window=34\nshell=ivi-shell.so' \
+            ${D}/${sysconfdir}/xdg/weston/weston.ini
+        sed -e '$a\\' \
+            -e '$a\[ivi-shell]' \
+            -e '$a\ivi-module=ivi-controller.so' \
+            -e '$a\ivi-input-module=ivi-input-controller.so' \
+            -e '$a\transition-duration=300' \
+            -e '$a\cursor-theme=default' \
+            -i ${D}/${sysconfdir}/xdg/weston/weston.ini
+    fi
+
+    # Set XDG_RUNTIME_DIR to /run/user/$UID (e.g. run/user/0)
+    install -d ${D}/${sysconfdir}/profile.d
+    install -m 0755 ${WORKDIR}/weston.sh ${D}/${sysconfdir}/profile.d/weston.sh
+}
+
+FILES_${PN}_append = " \
+    ${sysconfdir}/profile.d/weston.sh \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.ini b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.ini
new file mode 100644
index 00000000..f31c2906
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.ini
@@ -0,0 +1,2 @@
+[core]
+repaint-window=34
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.sh b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.sh
new file mode 100755
index 00000000..33ed8a4a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-conf/weston.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+if test -z "$XDG_RUNTIME_DIR"; then
+    export XDG_RUNTIME_DIR=/run/user/$UID
+fi
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend
new file mode 100644
index 00000000..dafc0330
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend
@@ -0,0 +1,9 @@
+require include/gles-control.inc
+
+do_install_append() {
+    if [ "X${USE_GLES}" = "X1" ]; then
+        sed -e "/RequiresMountsFor=\/run/a After=dbus.service multi-user.target" \
+            -e "s/\$OPTARGS/--idle-time=0 \$OPTARGS/" \
+            -i ${D}/${systemd_system_unitdir}/weston.service
+    fi
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston.inc
new file mode 100644
index 00000000..c1cc2066
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston.inc
@@ -0,0 +1,16 @@
+require include/gles-control.inc
+require include/multimedia-control.inc
+
+PACKAGECONFIG_remove_virtclass-multilib-lib32 = "launch"
+DEPENDS_append = " \
+    ${@oe.utils.conditional('USE_GLES', '1', ' libgbm', '', d)}"
+
+RDEPENDS_${PN}_append = " \
+    ${@oe.utils.conditional('USE_GLES', '1', ' libgbm', '', d)} \
+"
+RDEPENDS_${PN}-examples_append = " \
+    ${@oe.utils.conditional('USE_GLES', '1', ' libgbm', '', d)}"
+
+EXTRA_OECONF_append = " \
+    ${@oe.utils.conditional('USE_GLES', '1', '', \
+        ' WESTON_NATIVE_BACKEND="fbdev-backend.so"', d)}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston_%.bbappend
new file mode 100644
index 00000000..a7f8ff8f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/wayland/weston_%.bbappend
@@ -0,0 +1,4 @@
+require weston.inc
+
+
+PACKAGE_ARCH="${MACHINE_ARCH}"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg.inc
new file mode 100644
index 00000000..89318e53
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg.inc
@@ -0,0 +1,180 @@
+SUMMARY = "The X.Org X server"
+HOMEPAGE = "http://www.x.org"
+SECTION = "x11/base"
+LICENSE = "MIT-X"
+LIC_FILES_CHKSUM = "file://COPYING;md5=5df87950af51ac2c5822094553ea1880"
+
+# xf86-*-* packages depend on an X server built with the xfree86 DDX
+# so we have a virtual to represent that:
+# deprecated, we should use virtual/xserver instead
+PROVIDES = "virtual/xserver-xf86"
+
+# Other packages tend to just care that there is *an* X server:
+PROVIDES += "virtual/xserver"
+
+PE = "2"
+INC_PR = "r8"
+
+XORG_PN = "xorg-server"
+SRC_URI = "${XORG_MIRROR}/individual/xserver/${XORG_PN}-${PV}.tar.bz2"
+SRC_URI += "file://macro_tweak.patch"
+
+S = "${WORKDIR}/${XORG_PN}-${PV}"
+
+inherit autotools pkgconfig
+
+inherit distro_features_check
+REQUIRED_DISTRO_FEATURES = "x11"
+
+PROTO_DEPS = "xorgproto"
+LIB_DEPS = "pixman libxfont2 xtrans libxau libxext libxdmcp libdrm libxkbfile libpciaccess"
+DEPENDS = "${PROTO_DEPS} ${LIB_DEPS} font-util"
+
+# Split out some modules and extensions from the main package
+# These aren't needed for basic operations and only take up space:
+#  32.0k   libdri.so
+#  91.0k   libexa.so
+#  336.0k  libglx.so
+#  1360k   libint10.so
+#  180.0k  libwfb.so
+#  320.0k  libxaa.so
+#  124.0k  libxf1bpp.so
+#  84.0k   libxf4bpp.so
+#          librecord.so
+#          libextmod.so
+#          libdbe.so
+
+PACKAGES =+ "${PN}-sdl \
+             ${PN}-fbdev \
+             ${PN}-xvfb \
+             ${PN}-utils \
+             ${PN}-xephyr \
+             ${PN}-xwayland \
+             ${PN}-multimedia-modules \
+             ${PN}-extension-dri \
+             ${PN}-extension-dri2 \
+             ${PN}-extension-glx \
+             ${PN}-extension-record \
+             ${PN}-extension-extmod \
+             ${PN}-extension-dbe \
+             ${PN}-module-libint10 \
+             ${PN}-module-libafb \
+             ${PN}-module-libwfb  \
+             ${PN}-module-libmfb \
+             ${PN}-module-libcfb \
+             ${PN}-module-exa \
+             ${PN}-module-xaa \
+             ${PN}-module-libxf1bpp \
+             ${PN}-module-libxf4bpp \
+             xf86-video-modesetting"
+
+SUMMARY_xf86-video-modesetting = "X.Org X server -- modesetting display driver"
+INSANE_SKIP_${MLPREFIX}xf86-video-modesetting = "xorg-driver-abi"
+
+XSERVER_RRECOMMENDS = "xkeyboard-config rgb xserver-xf86-config xkbcomp xf86-input-libinput"
+RRECOMMENDS_${PN} += "${XSERVER_RRECOMMENDS}"
+RRECOMMENDS_${PN}-xwayland += "${XSERVER_RRECOMMENDS}"
+RDEPENDS_${PN}-xvfb += "xkeyboard-config"
+RDEPENDS_${PN}-module-exa = "${PN} (= ${EXTENDPKGV})"
+
+FILES_${PN} = "${bindir} ${libdir}/X11/Options ${libdir}/X11/Cards ${libdir}/X11/getconfig ${libdir}/X11/etc ${libdir}/modules/*.so ${libdir}/xorg/modules/*.so /etc/X11 ${libdir}/xorg/protocol.txt ${datadir}/X11/xorg.conf.d"
+FILES_${PN}-dev += "${libdir}/xorg/modules/*.la ${libdir}/xorg/modules/*/*.la"
+FILES_${PN}-doc += "${libdir}/X11/doc ${datadir}/X11/xkb/compiled/README.compiled ${localstatedir}/lib/xkb/README.compiled"
+FILES_${PN}-sdl = "${bindir}/Xsdl"
+FILES_${PN}-fbdev = "${bindir}/Xfbdev"
+FILES_${PN}-xvfb = "${bindir}/Xvfb"
+FILES_${PN}-utils = "${bindir}/scanpci ${bindir}/pcitweak ${bindir}/ioport ${bindir}/in[bwl] ${bindir}/out[bwl] ${bindir}/mmap[rw] ${bindir}/gtf ${bindir}/getconfig ${bindir}/getconfig.pl"
+FILES_${PN}-xephyr = "${bindir}/Xephyr"
+FILES_${PN}-xwayland = "${bindir}/Xwayland"
+FILES_${PN}-multimedia-modules = "${libdir}/xorg/modules/multimedia/*drv*"
+FILES_${PN}-extension-dri = "${libdir}/xorg/modules/extensions/libdri.so"
+FILES_${PN}-extension-dri2 = "${libdir}/xorg/modules/extensions/libdri2.so"
+FILES_${PN}-extension-glx = "${libdir}/xorg/modules/extensions/libglx.so"
+FILES_${PN}-extension-record = "${libdir}/xorg/modules/extensions/librecord.so"
+FILES_${PN}-extension-extmod = "${libdir}/xorg/modules/extensions/libextmod.so"
+FILES_${PN}-extension-dbe = "${libdir}/xorg/modules/extensions/libdbe.so"
+FILES_${PN}-module-libint10 = "${libdir}/xorg/modules/libint10.so"
+FILES_${PN}-module-libafb = "${libdir}/xorg/modules/libafb.so"
+FILES_${PN}-module-libwfb = "${libdir}/xorg/modules/libwfb.so"
+FILES_${PN}-module-libmfb = "${libdir}/xorg/modules/libmfb.so"
+FILES_${PN}-module-libcfb = "${libdir}/xorg/modules/libcfb.so"
+FILES_${PN}-module-exa = "${libdir}/xorg/modules/libexa.so"
+FILES_${PN}-module-xaa = "${libdir}/xorg/modules/libxaa.so"
+FILES_${PN}-module-libxf1bpp = "${libdir}/xorg/modules/libxf1bpp.so"
+FILES_${PN}-module-libxf4bpp = "${libdir}/xorg/modules/libxf4bpp.so"
+FILES_xf86-video-modesetting = "${libdir}/xorg/modules/drivers/modesetting_drv.so"
+
+EXTRA_OECONF += "--with-fop=no \
+                 --with-pic \
+                 --disable-static \
+                 --disable-record \
+                 --disable-dmx \
+                 --disable-xnest \
+                 --enable-xvfb \
+                 --enable-composite \
+                 --without-dtrace \
+                 --with-int10=x86emu \
+                 --sysconfdir=/etc/X11 \
+                 --localstatedir=/var \
+                 --with-xkb-output=/var/lib/xkb \
+"
+
+OPENGL_PKGCONFIGS = "dri glx glamor dri3 xshmfence"
+PACKAGECONFIG ??= "dri2 udev ${XORG_CRYPTO} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', '${OPENGL_PKGCONFIGS}', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'opengl wayland', 'xwayland', '', d)} \
+                   ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd systemd-logind', '', d)} \
+"
+
+PACKAGECONFIG[udev] = "--enable-config-udev,--disable-config-udev,udev"
+PACKAGECONFIG[dri] = "--enable-dri,--disable-dri,xorgproto virtual/mesa"
+PACKAGECONFIG[dri2] = "--enable-dri2,--disable-dri2,xorgproto"
+# DRI3 requires xshmfence to also be enabled
+PACKAGECONFIG[dri3] = "--enable-dri3,--disable-dri3,xorgproto"
+PACKAGECONFIG[glx] = "--enable-glx,--disable-glx,xorgproto virtual/libgl virtual/libx11"
+PACKAGECONFIG[glamor] = "--enable-glamor,--disable-glamor,libepoxy virtual/libgbm,libegl"
+PACKAGECONFIG[unwind] = "--enable-libunwind,--disable-libunwind,libunwind"
+PACKAGECONFIG[xshmfence] = "--enable-xshmfence,--disable-xshmfence,libxshmfence"
+PACKAGECONFIG[xmlto] = "--with-xmlto, --without-xmlto, xmlto-native docbook-xml-dtd4-native docbook-xsl-stylesheets-native"
+PACKAGECONFIG[systemd-logind] = "--enable-systemd-logind=yes,--enable-systemd-logind=no,dbus,"
+PACKAGECONFIG[systemd] = "--with-systemd-daemon,--without-systemd-daemon,systemd"
+PACKAGECONFIG[xinerama] = "--enable-xinerama,--disable-xinerama,xorgproto"
+PACKAGECONFIG[xwayland] = "--enable-xwayland,--disable-xwayland,wayland wayland-native wayland-protocols libepoxy"
+
+# Xorg requires a SHA1 implementation, pick one
+XORG_CRYPTO ??= "openssl"
+PACKAGECONFIG[openssl] = "--with-sha1=libcrypto,,openssl"
+PACKAGECONFIG[nettle] = "--with-sha1=libnettle,,nettle"
+PACKAGECONFIG[gcrypt] = "--with-sha1=libgcrypt,,libgcrypt"
+
+do_install_append () {
+	# Its assumed base-files creates this for us
+	rmdir ${D}${localstatedir}/log/
+}
+
+# Add runtime provides for the ABI versions of the video and input subsystems,
+# so that drivers can depend on the relevant version.
+python populate_packages_prepend() {
+    import subprocess
+
+    # Set PKG_CONFIG_PATH so pkg-config looks at the .pc files that are going
+    # into the new package, not the staged ones.
+    newenv = dict(os.environ)
+    newenv["PKG_CONFIG_PATH"] = d.expand("${PKGD}${libdir}/pkgconfig/")
+
+    def get_abi(name):
+        abis = {
+          "video": "abi_videodrv",
+          "input": "abi_xinput"
+        }
+        p = subprocess.Popen(args="pkg-config --variable=%s xorg-server" % abis[name],
+                             shell=True, env=newenv, stdout=subprocess.PIPE)
+        stdout, stderr = p.communicate()
+        output = stdout.decode("utf-8").split(".")[0]
+        mlprefix = d.getVar('MLPREFIX') or ''
+        return "%sxorg-abi-%s-%s" % (mlprefix, name, output)
+
+    pn = d.getVar("PN")
+    d.appendVar("RPROVIDES_" + pn, " " + get_abi("input"))
+    d.appendVar("RPROVIDES_" + pn, " " + get_abi("video"))
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-config-fix-NULL-value-detection-for-ID_INPUT-being-u.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-config-fix-NULL-value-detection-for-ID_INPUT-being-u.patch
new file mode 100644
index 00000000..964d5dd4
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-config-fix-NULL-value-detection-for-ID_INPUT-being-u.patch
@@ -0,0 +1,40 @@
+From a309323328d9d6e0bf5d9ea1d75920e53b9beef3 Mon Sep 17 00:00:00 2001
+From: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Fri, 5 Jan 2018 11:58:42 +1000
+Subject: [PATCH] config: fix NULL value detection for ID_INPUT being unset
+
+Erroneous condition caused us to keep going with all devices that didn't have
+ID_INPUT set.
+
+Fixes: 5aad81445c8c3d6
+Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104382
+Reviewed-by: Adam Jackson <ajax@redhat.com>
+Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
+
+Upstream-status: Backport
+https://patchwork.freedesktop.org/patch/196090/
+Affects: < 1.20.0
+[Yocto # 12899]
+
+Signed-off-by: Armin Kuster <akuser808@gmail.com>
+
+---
+ config/udev.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/config/udev.c b/config/udev.c
+index e198e8609..3a73189e2 100644
+--- a/config/udev.c
++++ b/config/udev.c
+@@ -135,7 +135,7 @@ device_added(struct udev_device *udev_device)
+ #endif
+ 
+     value = udev_device_get_property_value(udev_device, "ID_INPUT");
+-    if (value && !strcmp(value, "0")) {
++    if (!value || !strcmp(value, "0")) {
+         LogMessageVerb(X_INFO, 10,
+                        "config/udev: ignoring device %s without "
+                        "property ID_INPUT set\n", path);
+-- 
+2.17.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch
new file mode 100644
index 00000000..16ec3edb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch
@@ -0,0 +1,61 @@
+Discover monotonic clock using compile-time check
+
+monotonic clock check does not work when cross-compiling.
+
+Upstream-Status: Denied [Does not work on OpenBSD]
+Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
+
+
+
+Original patch follows:
+
+When xorg-xserver is being cross-compiled, there is currently no way
+for us to detect whether the monotonic clock is available on the
+target system, because we aren't able to run a test program on the host
+system. Currently, in this situation, we default to not use the
+monotonic clock. One problem with this situation is that the user will
+be treated as idle when the date is updated.
+
+To fix this situation, we now use a compile-time check to detect whether the
+monotonic clock is available. This check can run just fine when we are
+cross-compiling.
+
+Signed-off-by: David James <davidjames at google.com>
+---
+ configure.ac | 17 +++++++----------
+ 1 file changed, 7 insertions(+), 10 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index f7ab48c..26e85cd 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1048,19 +1048,16 @@ if ! test "x$have_clock_gettime" = xno; then
+         CPPFLAGS="$CPPFLAGS -D_POSIX_C_SOURCE=200112L"
+     fi
+ 
+-    AC_RUN_IFELSE([AC_LANG_SOURCE([
++    AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+ #include <time.h>
+-
+-int main(int argc, char *argv[[]]) {
+-    struct timespec tp;
+-
+-    if (clock_gettime(CLOCK_MONOTONIC, &tp) == 0)
++#include <unistd.h>
++int main() {
++#if !(defined(_POSIX_MONOTONIC_CLOCK) && _POSIX_MONOTONIC_CLOCK >= 0 && defined(CLOCK_MONOTONIC))
++        #error No monotonic clock
++#endif
+         return 0;
+-    else
+-        return 1;
+ }
+-    ])], [MONOTONIC_CLOCK=yes], [MONOTONIC_CLOCK=no],
+-       [MONOTONIC_CLOCK="cross compiling"])
++]])],[MONOTONIC_CLOCK=yes], [MONOTONIC_CLOCK=no])
+ 
+     LIBS="$LIBS_SAVE"
+     CPPFLAGS="$CPPFLAGS_SAVE"
+-- 
+2.1.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch
new file mode 100644
index 00000000..d05eec5b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch
@@ -0,0 +1,53 @@
+From d77cdc5e1eee26821ab98c947abea53fb7b18fe5 Mon Sep 17 00:00:00 2001
+From: California Sullivan <california.l.sullivan@intel.com>
+Date: Fri, 16 Mar 2018 17:23:11 -0700
+Subject: [PATCH] xf86pciBus.c: use Intel ddx only for pre-gen4 hardware
+
+Use intel ddx only on pre-gen4 hw, newer ones will fall back to modesetting
+Author: Timo Aaltonen <tjaalton@debian.org>
+
+Instead of defaulting to the Intel driver for all Intel hardware, only
+default it for older hardware for which it has shown to be better for.
+
+Others fall through to the -modesetting default.
+
+Upstream-Status: Pending [Debian/Fedora patch
+https://src.fedoraproject.org/rpms/xorg-x11-server/c/ee515e44b07e37689abf48cf2fffb41578f3bc1d]
+
+Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
+---
+ hw/xfree86/common/xf86pciBus.c | 18 +++++++++++++++++-
+ 1 file changed, 17 insertions(+), 1 deletion(-)
+
+diff --git a/hw/xfree86/common/xf86pciBus.c b/hw/xfree86/common/xf86pciBus.c
+index e61ae0cd4..d70c99197 100644
+--- a/hw/xfree86/common/xf86pciBus.c
++++ b/hw/xfree86/common/xf86pciBus.c
+@@ -1173,7 +1173,23 @@ xf86VideoPtrToDriverList(struct pci_device *dev,
+ 		case 0x0bef:
+ 			/* Use fbdev/vesa driver on Oaktrail, Medfield, CDV */
+ 			break;
+-		default:
++		/* Default to intel only on pre-gen4 chips */
++		case 0x3577:
++		case 0x2562:
++		case 0x3582:
++		case 0x358e:
++		case 0x2572:
++		case 0x2582:
++		case 0x258a:
++		case 0x2592:
++		case 0x2772:
++		case 0x27a2:
++		case 0x27ae:
++		case 0x29b2:
++		case 0x29c2:
++		case 0x29d2:
++		case 0xa001:
++		case 0xa011:
+ 			driverList[0] = "intel";
+ 			break;
+         }
+-- 
+2.14.3
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-Remove-check-for-useSIGIO-option.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-Remove-check-for-useSIGIO-option.patch
new file mode 100644
index 00000000..beed6cb4
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-Remove-check-for-useSIGIO-option.patch
@@ -0,0 +1,47 @@
+From cf407b16cd65ad6e26a9c8e5984e163409a5c0f7 Mon Sep 17 00:00:00 2001
+From: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
+Date: Mon, 30 Jan 2017 16:32:06 -0600
+Subject: [PATCH] Remove check for useSIGIO option
+
+Commit 6a5a4e60373c1386b311b2a8bb666c32d68a9d99 removes the configure of useSIGIO
+option.
+
+As the xfree86 SIGIO support is reworked to use internal versions of OsBlockSIGIO
+and OsReleaseSIGIO.
+
+No longer the check for useSIGIO is needed
+
+Upstream-Status: Pending
+
+Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
+---
+ hw/xfree86/os-support/shared/sigio.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+diff --git a/hw/xfree86/os-support/shared/sigio.c b/hw/xfree86/os-support/shared/sigio.c
+index 884a71c..be76498 100644
+--- a/hw/xfree86/os-support/shared/sigio.c
++++ b/hw/xfree86/os-support/shared/sigio.c
+@@ -185,9 +185,6 @@ xf86InstallSIGIOHandler(int fd, void (*f) (int, void *), void *closure)
+     int i;
+     int installed = FALSE;
+ 
+-    if (!xf86Info.useSIGIO)
+-        return 0;
+-
+     for (i = 0; i < MAX_FUNCS; i++) {
+         if (!xf86SigIOFuncs[i].f) {
+             if (xf86IsPipe(fd))
+@@ -256,9 +253,6 @@ xf86RemoveSIGIOHandler(int fd)
+     int max;
+     int ret;
+ 
+-    if (!xf86Info.useSIGIO)
+-        return 0;
+-
+     max = 0;
+     ret = 0;
+     for (i = 0; i < MAX_FUNCS; i++) {
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-modesetting-Fix-16-bit-depth-bpp-mode.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-modesetting-Fix-16-bit-depth-bpp-mode.patch
new file mode 100644
index 00000000..5243761f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/0003-modesetting-Fix-16-bit-depth-bpp-mode.patch
@@ -0,0 +1,46 @@
+From 5028ef46ff4ab0930224b71024a7349b05610d42 Mon Sep 17 00:00:00 2001
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 22 Dec 2016 15:41:06 +0100
+Subject: [PATCH] modesetting: Fix 16 bit depth/bpp mode
+
+When setting DefaultDepth to 16 in the Screen section, the current
+code requests a 32 bpp framebuffer, however the X-Server seems to
+assumes 16 bpp.
+
+Fixes commit 21217d02168d ("modesetting: Implement 32->24 bpp
+conversion in shadow update")
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+
+Upstream-Status: Submitted [1]
+
+[1] https://lists.x.org/archives/xorg-devel/2016-December/052113.html
+---
+ hw/xfree86/drivers/modesetting/driver.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/hw/xfree86/drivers/modesetting/driver.c b/hw/xfree86/drivers/modesetting/driver.c
+index d7030e5..647ad83 100644
+--- a/hw/xfree86/drivers/modesetting/driver.c
++++ b/hw/xfree86/drivers/modesetting/driver.c
+@@ -930,7 +930,7 @@ PreInit(ScrnInfoPtr pScrn, int flags)
+                    "Using 24bpp hw front buffer with 32bpp shadow\n");
+         defaultbpp = 32;
+     } else {
+-        ms->drmmode.kbpp = defaultbpp;
++        ms->drmmode.kbpp = 0;
+     }
+     bppflags = PreferConvert24to32 | SupportConvert24to32 | Support32bppFb;
+ 
+@@ -950,6 +950,8 @@ PreInit(ScrnInfoPtr pScrn, int flags)
+         return FALSE;
+     }
+     xf86PrintDepthBpp(pScrn);
++    if (!ms->drmmode.kbpp)
++        ms->drmmode.kbpp = pScrn->bitsPerPixel;
+ 
+     /* Process the options */
+     xf86CollectOptions(pScrn, NULL);
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/macro_tweak.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/macro_tweak.patch
new file mode 100644
index 00000000..c36e4e73
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/macro_tweak.patch
@@ -0,0 +1,25 @@
+This is the revised version of files/macro_tweak.patch for
+xorg-server 1.8.99.904 and newer.
+
+Upstream-Status: Pending
+
+Signed-off-by: Yu Ke <ke.yu@intel.com>
+
+Index: xorg-server-1.19.6/xorg-server.m4
+===================================================================
+--- xorg-server-1.19.6.orig/xorg-server.m4
++++ xorg-server-1.19.6/xorg-server.m4
+@@ -28,10 +28,12 @@ dnl
+ # Checks for the MACRO define in xorg-server.h (from the sdk).  If it
+ # is defined, then add the given PROTO to $REQUIRED_MODULES.
+ 
++m4_pattern_allow(PKG_CONFIG_SYSROOT_DIR)
++
+ AC_DEFUN([XORG_DRIVER_CHECK_EXT],[
+ 	AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+ 	SAVE_CFLAGS="$CFLAGS"
+-	CFLAGS="$CFLAGS -I`$PKG_CONFIG --variable=sdkdir xorg-server`"
++	CFLAGS="$CFLAGS -I$PKG_CONFIG_SYSROOT_DIR`$PKG_CONFIG --variable=sdkdir xorg-server`"
+ 	AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+ #include "xorg-server.h"
+ #if !defined $1
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/musl-arm-inb-outb.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/musl-arm-inb-outb.patch
new file mode 100644
index 00000000..4be441fb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg/musl-arm-inb-outb.patch
@@ -0,0 +1,18 @@
+inb/outb family for arm is only implemented on glibc
+so assumption across linux is wrong
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+Upstream-Status: Pending
+Index: xorg-server-1.18.0/hw/xfree86/common/compiler.h
+===================================================================
+--- xorg-server-1.18.0.orig/hw/xfree86/common/compiler.h
++++ xorg-server-1.18.0/hw/xfree86/common/compiler.h
+@@ -758,7 +758,7 @@ inl(unsigned short port)
+     return xf86ReadMmio32Le((void *) ioBase, port);
+ }
+ 
+-#elif defined(__arm__) && defined(__linux__)
++#elif defined(__arm__) && defined(__GLIBC__)
+ 
+ /* for Linux on ARM, we use the LIBC inx/outx routines */
+ /* note that the appropriate setup via "ioperm" needs to be done */
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
new file mode 100644
index 00000000..cfc27142
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
@@ -0,0 +1,3 @@
+# Glamor for Xorg requires gbm >= 10.2.0.
+# Glamor is not necessary with current env, so disable it.
+PACKAGECONFIG_remove = "glamor"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_1.19.6.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_1.19.6.bb
new file mode 100644
index 00000000..7e8a9541
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_1.19.6.bb
@@ -0,0 +1,33 @@
+require xserver-xorg.inc
+
+SRC_URI += "file://musl-arm-inb-outb.patch \
+            file://0001-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch \
+            file://0003-modesetting-Fix-16-bit-depth-bpp-mode.patch \
+            file://0003-Remove-check-for-useSIGIO-option.patch \
+            file://0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch \
+            file://0001-config-fix-NULL-value-detection-for-ID_INPUT-being-u.patch \
+            "
+SRC_URI[md5sum] = "3e47777ff034a331aed2322b078694a8"
+SRC_URI[sha256sum] = "a732502f1db000cf36a376cd0c010ffdbf32ecdd7f1fa08ba7f5bdf9601cc197"
+
+# These extensions are now integrated into the server, so declare the migration
+# path for in-place upgrades.
+
+RREPLACES_${PN} =  "${PN}-extension-dri \
+                    ${PN}-extension-dri2 \
+                    ${PN}-extension-record \
+                    ${PN}-extension-extmod \
+                    ${PN}-extension-dbe \
+                   "
+RPROVIDES_${PN} =  "${PN}-extension-dri \
+                    ${PN}-extension-dri2 \
+                    ${PN}-extension-record \
+                    ${PN}-extension-extmod \
+                    ${PN}-extension-dbe \
+                   "
+RCONFLICTS_${PN} = "${PN}-extension-dri \
+                    ${PN}-extension-dri2 \
+                    ${PN}-extension-record \
+                    ${PN}-extension-extmod \
+                    ${PN}-extension-dbe \
+                   "
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb
new file mode 100644
index 00000000..62f10d6c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb
@@ -0,0 +1,41 @@
+DESCRIPTION = "ADSP Driver for Linux"
+LICENSE = "GPLv2 & MIT"
+
+LIC_FILES_CHKSUM = " \
+    file://COPYING;md5=55979d94ccbb973fdea772250e0c54d6 \
+    file://MIT-COPYING;md5=f932f6ad0feea4f97b6e8316e172070e \
+"
+
+inherit module distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "adsp"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/xtensa-hifi:"
+
+SRC_URI = "file://RCG3AHPDL4101ZDO.tar.gz"
+
+S = "${WORKDIR}/RCG3AHPDL4101ZDO"
+
+# Define the extra config for using module.bbclass to build ADSP driver
+EXTRA_OEMAKE_append = " KDIR=${STAGING_KERNEL_DIR}"
+
+# Build ADSP kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+# Enable build target for E3 board
+do_configure_prepend_r8a77990(){
+    sed -i 's|-DTARGET_BOARD_E3=0|-DTARGET_BOARD_E3=1|g' ${S}/Kbuild
+}
+
+do_install_append(){
+    # Create install directories
+    install -d ${D}/${includedir}
+    install -d ${D}/${includedir}/sys/xt-shmem
+
+    # Install shared header files
+    install -m 644 ${S}/include/*.h ${D}/${includedir}/
+    install -m 644 ${S}/include/sys/xt-shmem/*.h ${D}/${includedir}/sys/xt-shmem/
+}
+
+# The ADSP driver need adsp firmware for running
+RDEPENDS_${PN}_append = " adsp-fw-module"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb
new file mode 100644
index 00000000..092d44a8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb
@@ -0,0 +1,39 @@
+DESCRIPTION = "AVB MCH Driver for Linux for the R-Car Gen3"
+
+require include/avb-control.inc
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=96e553279b3fff0d6168dafe0b596197 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-mch.git;branch=rcar-gen3"
+SRCREV = "5c02335afa0c6c692798dc07e65c9eb21943fb2f"
+
+S = "${WORKDIR}/git"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build AVB MCH kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install_append() {
+    # Create destination directories
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ravb_mch.h ${KERNELSRC}/include
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/ravb_mch.h ${D}/${includedir}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb
new file mode 100644
index 00000000..e7609c15
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb
@@ -0,0 +1,41 @@
+DESCRIPTION = "AVB MSE Driver for Linux for the R-Car Gen3"
+
+require include/avb-control.inc
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=98449101c5d5452a9429b88d6ead1ba4 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas kernel-module-avb-streaming kernel-module-avb-mch"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-mse.git;branch=rcar-gen3"
+SRCREV = "d290b4a5d7afab654a8b3a356934be2c1406c378"
+
+S = "${WORKDIR}/git"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build AVB MSE kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install_append() {
+    # Create destination directories
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ravb_mse.h ${KERNELSRC}/include
+    install -m 644 ${S}/ravb_mse_kernel.h ${KERNELSRC}/include
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/ravb_mse.h ${D}/${includedir}
+    install -m 644 ${S}/ravb_mse_kernel.h ${D}/${includedir}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb
new file mode 100644
index 00000000..5087449f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb
@@ -0,0 +1,39 @@
+DESCRIPTION = "AVB Streaming Driver for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/avb-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=704e38c3a28fde2e7fa153d3e0e787a4 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-streaming.git;branch=rcar-gen3"
+SRCREV = "526c794e5667d4b260934ef1e3934a094f01f404"
+
+S = "${WORKDIR}/git"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build AVB Streaming kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install_append () {
+    # Create destination directories
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ravb_eavb.h ${KERNELSRC}/include
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/ravb_eavb.h ${D}/${includedir}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb
new file mode 100644
index 00000000..42f4f85b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb
@@ -0,0 +1,59 @@
+DESCRIPTION = "DTV Driver part of scu_src for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://scu_src_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://scu_src_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-scu-src"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://scu_src_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+EXTRA_OEMAKE_r8a77965 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3N"
+
+# Build DTV kernel modules without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/scu_src_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/scu_src_drv/drv/scu_src_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/scu_src_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/scu_src_drv/drv/Module.symvers ${KERNELSRC}/include/scu-drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/scu_src_drv.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-scu-src kernel-module-scu-src-drv"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb
new file mode 100644
index 00000000..4b1408eb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb
@@ -0,0 +1,59 @@
+DESCRIPTION = "DTV Driver part of ssp for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://ssp_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://ssp_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-ssp"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://ssp_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+EXTRA_OEMAKE_r8a77965 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3N"
+
+# Build DTV SSP kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/ssp_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/ssp_drv/drv/ssp_dev.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/ssp_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/ssp_drv/drv/Module.symvers ${KERNELSRC}/include/ssp_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/ssp_dev.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-ssp"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb
new file mode 100644
index 00000000..55c56901
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb
@@ -0,0 +1,59 @@
+DESCRIPTION = "DTV Driver part of tddmac for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://tddmac_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://tddmac_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-tddmac"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://tddmac_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+EXTRA_OEMAKE_r8a77965 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3N"
+
+# Build DTV tddmac kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/tddmac_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/tddmac_drv/drv/tddmac.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/tddmac_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/tddmac_drv/drv/Module.symvers ${KERNELSRC}/include/tddmac_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/tddmac.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-tddmac"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb
new file mode 100644
index 00000000..f93db45b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb
@@ -0,0 +1,58 @@
+DESCRIPTION = "DTV Driver part of tsif for Linux for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://tsif_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://tsif_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+
+inherit module distro_features_check
+
+PN = "kernel-module-tsif"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI = "file://tsif_drv.tar.gz"
+
+S = "${WORKDIR}"
+
+EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3"
+EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3"
+EXTRA_OEMAKE_r8a77965 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3N"
+
+# Build DTV tsif kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/tsif_drv/drv
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install kernel module
+    install -m 644 ${S}/tsif_drv/drv/tsif_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR).
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/tsif_drv/include/*.h ${KERNELSRC}/include
+    install -m 644 ${S}/tsif_drv/drv/Module.symvers ${KERNELSRC}/include/tsif_drv.symvers
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/tsif_drv.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-tsif kernel-module-tsif-drv"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb
new file mode 100644
index 00000000..249a0574
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb
@@ -0,0 +1,78 @@
+DESCRIPTION = "Kernel module of PowerVR GPU"
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e \
+    file://MIT-COPYING;md5=8c2810fa6bfdc5ae5c15a0c1ade34054 \
+"
+inherit module
+require include/checksum_control.inc
+
+PN = "kernel-module-gles"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "(r8a7795|r8a7796|r8a77965|r8a77990)"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI_r8a7795 = 'file://GSX_KM_H3.tar.bz2'
+SRC_URI_r8a7796 = 'file://GSX_KM_M3.tar.bz2'
+SRC_URI_r8a77965 = 'file://GSX_KM_M3N.tar.bz2'
+SRC_URI_r8a77990 = 'file://GSX_KM_E3.tar.bz2'
+
+S = "${WORKDIR}/rogue_km"
+
+# W/A fix build errors with GCC 8.1
+SRC_URI_append = " file://0001-Silenced-Wcast-function-type-Wsizeof-pointer-div-and.patch"
+
+KBUILD_DIR_r8a7795 = "${S}/build/linux/r8a7795_linux"
+KBUILD_DIR_r8a7796 = "${S}/build/linux/r8a7796_linux"
+KBUILD_DIR_r8a77965 = "${S}/build/linux/r8a77965_linux"
+KBUILD_DIR_r8a77990 = "${S}/build/linux/r8a7799_linux"
+KBUILD_OUTDIR_r8a7795 = "binary_r8a7795_linux_release/target_aarch64/kbuild/"
+KBUILD_OUTDIR_r8a7796 = "binary_r8a7796_linux_release/target_aarch64/kbuild/"
+KBUILD_OUTDIR_r8a77965 = "binary_r8a77965_linux_release/target_aarch64/kbuild/"
+KBUILD_OUTDIR_r8a77990 = "binary_r8a7799_linux_release/target_aarch64/kbuild/"
+
+B = "${KBUILD_DIR}"
+
+EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}"
+EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}"
+
+# Build GFX kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+module_do_compile() {
+    unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+    cd ${KBUILD_DIR}
+    oe_runmake
+}
+
+module_do_install() {
+    unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+    install -d ${D}/lib/modules/${KERNEL_VERSION}
+    cd ${KBUILD_DIR}
+    oe_runmake DISCIMAGE="${D}" install
+}
+
+# Ship the module symbol file to kernel build dir
+SYSROOT_PREPROCESS_FUNCS = "module_sysroot_symbol"
+
+module_sysroot_symbol() {
+    install -m 644 ${S}/${KBUILD_OUTDIR}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/GLES.symvers
+}
+
+# Clean up the module symbol file
+CLEANFUNCS = "module_clean_symbol"
+
+module_clean_symbol() {
+    rm -f ${STAGING_KERNEL_BUILDDIR}/GLES.symvers
+}
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/pvrsrvkm.ko \
+    ${sysconfdir}/modules-load.d \
+"
+
+RPROVIDES_${PN} += "kernel-module-pvrsrvkm kernel-module-dc-linuxfb"
+
+# Auto load pvrsrvkm
+KERNEL_MODULE_AUTOLOAD_append = " pvrsrvkm"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles/0001-Silenced-Wcast-function-type-Wsizeof-pointer-div-and.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles/0001-Silenced-Wcast-function-type-Wsizeof-pointer-div-and.patch
new file mode 100644
index 00000000..fd911584
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles/0001-Silenced-Wcast-function-type-Wsizeof-pointer-div-and.patch
@@ -0,0 +1,60 @@
+From 1bc7c0daece11b36abebc48b9113193056289fe6 Mon Sep 17 00:00:00 2001
+From: Thuy Tran <thuy.tran.xh@renesas.com>
+Date: Tue, 17 Jul 2018 15:01:56 +0700
+Subject: [PATCH] Silenced -Wcast-function-type, -Wsizeof-pointer-div and
+ -Wstringop-truncation options of GCC 8.1
+
+Current GFX source code will get compilation error with GCC 8.1,
+because it is defined in makefile to use -Wall to enable all Warnings
+check.
+-Wcast-function-type, -Wsizeof-pointer-div and -Wstringop-truncation
+are new Warnings from GCC 8.
+
+=====================================================================
+* Error generated by -Wcast-function-type
+
+    rogue_km/binary_r8a7796_linux_release/target_aarch64/kbuild/services/server/env/linux/module_common.c:43:
+    kernel-source/include/linux/timer.h: In function 'timer_setup':
+    error: cast between incompatible function types from 'void (*)(struct timer_list *)' to 'void (*)(long unsigned int)' [-Werror=cast-function-type]
+  __setup_timer(timer, (TIMER_FUNC_TYPE)callback,
+                       ^
+/ssd/thuy/FS2.6/M1/build_m3ulcb_mmp/tmp/work-shared/m3ulcb/kernel-source/include/linux/timer.h:144:25: note: in definition of macro '__setup_timer'
+   (_timer)->function = (_fn);    \
+                         ^~~
+======================================================================
+* Error generated by -Wsizeof-pointer-div
+
+    rogue_km/binary_r8a7796_linux_release/target_aarch64/kbuild/services/server/env/linux/km_apphint.c:229:48: error: division 'sizeof (void *) / sizeof (void)' does not compute the number of array elements [-Werror=sizeof-pointer-div]
+ #define APPHINT_HELP_ARRAY_SIZE(a) (sizeof((a))/(sizeof((a[0]))))
+                                                ^
+    rogue_km/binary_r8a7796_linux_release/target_aarch64/kbuild/services/server/env/linux/km_apphint.c:233:49: note: in expansion of macro 'APPHINT_HELP_ARRAY_SIZE'
+  {APPHINT_ID_ ## a, APPHINT_DATA_TYPE_ ## b, e, APPHINT_HELP_ARRAY_SIZE(e) },
+                                                 ^~~~~~~~~~~~~~~~~~~~~~~
+======================================================================
+* Error generated by -Wstringop-truncation
+
+    rogue_km/binary_r8a7796_linux_release/target_aarch64/kbuild/services/server/devices/rgx/rgxfwutils.c:1294:2: error: 'strncat' output truncated before terminating nul copying 7 bytes from a string of the same length [-Werror=stringop-truncation]
+  strncat(sCCBCtlName, sAppend, APPEND_STR_SIZE);
+  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
+---
+ build/linux/buildvars.mk | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/build/linux/buildvars.mk b/build/linux/buildvars.mk
+index a871d37..ddf12eb 100644
+--- a/build/linux/buildvars.mk
++++ b/build/linux/buildvars.mk
+@@ -51,7 +51,7 @@
+ 
+ # These flags are used for kernel, User C and User C++
+ #
+-COMMON_FLAGS := -W -Wall
++COMMON_FLAGS := -W -Wall -Wno-cast-function-type -Wno-sizeof-pointer-div -Wno-stringop-truncation
+ 
+ # Enable 64-bit file & memory handling on 32-bit systems.
+ #
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb
new file mode 100644
index 00000000..d7b230aa
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb
@@ -0,0 +1,34 @@
+DESCRIPTION = "Linux ICCOM hwspinlock Sample Driver for Renesas R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-iccom-hwspinlock-sample"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://iccom-hwspinlock-sample.tar.bz2"
+
+S = "${WORKDIR}/iccom-hwspinlock-sample"
+B = "${S}/iccom-hwspinlock-sample"
+
+# Build ICCOM kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install () {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install kernel module
+    install -m 644 ${B}/iccom_hwspinlock_sample.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+}
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/iccom_hwspinlock_sample.ko \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb
new file mode 100644
index 00000000..47d37eb3
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb
@@ -0,0 +1,37 @@
+DESCRIPTION = "Linux ICCOM MFIS Driver for Renesas R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+inherit module distro_features_check
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-iccom-mfis"
+PR = "r0"
+
+REQUIRED_DISTRO_FEATURES = "iccom"
+
+SRC_URI = "file://iccom-mfis.tar.bz2"
+
+S = "${WORKDIR}/iccom-mfis"
+B = "${S}/iccom-mfis/drv"
+
+# Build ICCOM MFIS kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install () {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install kernel module
+    install -m 644 ${B}/iccom_mfis.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+}
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/iccom_mfis.ko \
+"
+
+# Autoload ICCOM MFIS Driver
+KERNEL_MODULE_AUTOLOAD_append = " iccom_mfis"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb
new file mode 100644
index 00000000..694163ef
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb
@@ -0,0 +1,75 @@
+DESCRIPTION = "Memory Manager Kernel module for Renesas R-Car Gen3"
+
+require mmngr_drv.inc
+require include/dtv-dvd-control.inc
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-mmngr"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+MMNGR_DRV_DIR = "mmngr_drv/mmngr/mmngr-module/files/mmngr"
+
+MMNGR_CFG_salvator-x = "MMNGR_SALVATORX"
+MMNGR_CFG_h3ulcb = "MMNGR_SALVATORX"
+MMNGR_CFG_m3ulcb = "MMNGR_SALVATORX"
+MMNGR_CFG_m3nulcb = "MMNGR_SALVATORX"
+MMNGR_CFG_ebisu = "MMNGR_EBISU"
+
+includedir = "${RENESAS_DATADIR}/include"
+SSTATE_DUPWHITELIST += "${STAGING_INCDIR}"
+
+# Build Memory Manager kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    export MMNGR_CONFIG=${MMNGR_CFG}
+
+    if [ "X${USE_DTV}" = "X1" ]; then
+        export MMNGR_SSP_CONFIG="MMNGR_SSP_ENABLE"
+    else
+        export MMNGR_SSP_CONFIG="MMNGR_SSP_DISABLE"
+    fi
+
+    export MMNGR_IPMMU_MMU_CONFIG="IPMMU_MMU_DISABLE"
+
+    cd ${S}/${MMNGR_DRV_DIR}/drv
+    install -d ${INCSHARED}
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngr.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/mmngr.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${KERNELSRC}/include/
+
+    # Install shared header file to ${includedir}
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${D}/${includedir}/
+    install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/mmngr.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-mmngr"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb
new file mode 100644
index 00000000..6a2fb8dc
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb
@@ -0,0 +1,60 @@
+DESCRIPTION = "Memory Manager Buffer Kernel module for Renesas R-Car Gen3"
+
+require mmngr_drv.inc
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-mmngrbuf"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+MMNGRBUF_DRV_DIR = "mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf"
+
+# Support HW overlay mode in weston 5.0
+SRC_URI_append = "\
+    file://0001-mmngr_drv-mmngrbuf-Take-care-of-any-migration-of-sca.patch \
+"
+
+includedir = "${RENESAS_DATADIR}/include"
+SSTATE_DUPWHITELIST += "${STAGING_INCDIR}"
+
+# Build Memory Manager Buffer kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/${MMNGRBUF_DRV_DIR}/drv
+    install -d ${INCSHARED}
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngrbuf.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/mmngrbuf.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${KERNELSRC}/include/
+
+    # Install shared header files to ${includedir}
+    install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/mmngrbuf.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-mmngrbuf"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf/0001-mmngr_drv-mmngrbuf-Take-care-of-any-migration-of-sca.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf/0001-mmngr_drv-mmngrbuf-Take-care-of-any-migration-of-sca.patch
new file mode 100644
index 00000000..7e5ca0aa
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf/0001-mmngr_drv-mmngrbuf-Take-care-of-any-migration-of-sca.patch
@@ -0,0 +1,35 @@
+From 43d2cc7496340eea3f96cb3c3cf66139e0878f3c Mon Sep 17 00:00:00 2001
+From: Hai Nguyen Pham <hai.pham.ud@renesas.com>
+Date: Tue, 26 Mar 2019 15:56:30 +0700
+Subject: [PATCH] mmngr_drv: mmngrbuf: Take care of any migration of
+ scatterlist
+
+MMNGRBUF should take care of any migration of scatterlist for
+all (shared) users of the DMA buffer. Although we only care about
+DMA addresses at the moment, this will benefit the DRM system that
+uses the buffer allocated by MMNGR directly.
+
+Initialize the scatterlist entry so that it can be happily traversed.
+
+Signed-off-by: Hai Nguyen Pham <hai.pham.ud@renesas.com>
+---
+ mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf/drv/mmngr_buf_drv.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf/drv/mmngr_buf_drv.c b/mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf/drv/mmngr_buf_drv.c
+index fe3db08..d9189e9 100644
+--- a/mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf/drv/mmngr_buf_drv.c
++++ b/mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf/drv/mmngr_buf_drv.c
+@@ -256,6 +256,9 @@ static struct sg_table *dmabuf_map_dma_buf(struct dma_buf_attachment *attach,
+ 		return NULL;
+ 	}
+ 
++	sg_set_page(sgt->sgl, pfn_to_page(PFN_DOWN(priv->hard_addr)),
++		    priv->size, offset_in_page(priv->hard_addr));
++
+ 	sg_dma_address(sgt->sgl) = priv->hard_addr;
+ 	sg_dma_len(sgt->sgl) = priv->size;
+ 
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc
new file mode 100644
index 00000000..77a0bced
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc
@@ -0,0 +1,13 @@
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+require include/rcar-gen3-modules-common.inc
+inherit module
+
+MMNGR_DRV_URI = "git://github.com/renesas-rcar/mmngr_drv.git"
+
+SRC_URI = "${MMNGR_DRV_URI};branch=rcar_gen3"
+SRCREV = "85d0042924de379307115533d7b6284333409bb3"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb
new file mode 100644
index 00000000..5b02fb92
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb
@@ -0,0 +1,62 @@
+DESCRIPTION = "QoS driver for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-qos"
+PR = "r0"
+
+QOS_DRV_URL = "git://github.com/renesas-rcar/qos_drv.git"
+BRANCH = "rcar-gen3"
+SRCREV = "d32fbee4d7b76056c37935ff31102c3583801a29"
+
+SRC_URI = "${QOS_DRV_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+QOS_DRV_DIR = "qos-module/files/qos/drv"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build Qos kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/${QOS_DRV_DIR}/
+    oe_runmake
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${QOS_DRV_DIR}/Module.symvers ${KERNELSRC}/include/qos.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${D}/${includedir}/
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/qos.ko \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb
new file mode 100644
index 00000000..bb326418
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb
@@ -0,0 +1,70 @@
+DESCRIPTION = "Kernel module of UVCS"
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/lkm/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/core/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://src/cmn/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/lkm/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/core/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+    file://src/cmn/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \
+"
+require include/omx-control.inc
+require include/rcar-gen3-path-common.inc
+require include/checksum_control.inc
+
+inherit module
+
+PR = "r0"
+
+SRC_URI = "${@oe.utils.conditional('USE_VIDEO_OMX', '1', 'file://RCG3VUDRL4101ZDO.tar.bz2', '', d)}"
+
+S = "${WORKDIR}/RCG3VUDRL4101ZDO"
+
+EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}"
+EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}"
+
+B="${S}/src/makefile"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_compile_prepend() {
+    export UVCS_SRC="${S}/src"
+    export UVCS_INC="${S}"
+    export VCP4_SRC="${S}/src"
+}
+
+# Build UVCS kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}/
+
+    # Install kernel module
+    install -m 644 ${B}/uvcs_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install module symbol file
+    install -m 644 ${B}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers
+
+    # Install shared header file
+    install -m 644 ${S}/include/uvcs_ioctl.h ${D}/${includedir}/
+}
+
+# Clean up the module symbol file
+CLEANFUNCS = "module_clean_symbol"
+
+module_clean_symbol() {
+    rm -f ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-sstate \
+"
+
+FILES_${PN}-sstate = " \
+    ${includedir}/uvcs_ioctl.h \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb
new file mode 100644
index 00000000..be8f8e01
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb
@@ -0,0 +1,65 @@
+DESCRIPTION = "VSP2Driver for the R-Car Gen3"
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+inherit module
+
+DEPENDS = "linux-renesas kernel-module-vspm"
+PN = "kernel-module-vsp2driver"
+PR = "r0"
+
+VSP2DRIVER_URL = " \
+    git://github.com/renesas-rcar/vsp2driver.git"
+BRANCH = "rcar-gen3"
+SRCREV = "0ecf35aa05c103ba4d3ab83e3320a22fccd912c3"
+
+SRC_URI = "${VSP2DRIVER_URL};branch=${BRANCH}"
+
+SRC_URI_append = " file://0001-Handle-data_offset-setting-from-V4L2-API.patch"
+
+S = "${WORKDIR}/git"
+
+# Build VSP2 driver kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/vsp2driver
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/vsp2driver/Module.symvers ${KERNELSRC}/include/vsp2.symvers
+
+    # Copy kernel module
+    install -m 644 ${S}/vsp2driver/vsp2.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/vsp2driver/linux/vsp2.h ${KERNELSRC}/include/
+}
+
+PACKAGES = "\
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vsp2.ko \
+    ${sysconfdir}/modules-load.d \
+"
+
+RPROVIDES_${PN} += "kernel-module-vsp2driver kernel-module-vsp2"
+
+# Autoload VSP2Driver
+KERNEL_MODULE_AUTOLOAD_append = " vsp2"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver/0001-Handle-data_offset-setting-from-V4L2-API.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver/0001-Handle-data_offset-setting-from-V4L2-API.patch
new file mode 100644
index 00000000..3aab1740
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver/0001-Handle-data_offset-setting-from-V4L2-API.patch
@@ -0,0 +1,29 @@
+From 50dd867589931beef05dbcdb17a37a8a678e4b13 Mon Sep 17 00:00:00 2001
+From: Damian Hobson-Garcia <dhobsong@igel.co.jp>
+Date: Fri, 10 May 2019 13:34:42 +0900
+Subject: [PATCH] Handle data_offset setting from V4L2 API
+
+The data in each buffer does not necessarily start at the
+beginning of the buffer.  Adjust as necessary according to
+the data_offset field specified from user space.
+---
+ vsp2driver/vsp2_video.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/vsp2driver/vsp2_video.c b/vsp2driver/vsp2_video.c
+index 8875578..0abf81c 100644
+--- a/vsp2driver/vsp2_video.c
++++ b/vsp2driver/vsp2_video.c
+@@ -764,7 +764,8 @@ static int vsp2_video_buffer_prepare(struct vb2_buffer *vb)
+ 	}
+ 
+ 	for (i = 0; i < vb->num_planes; ++i) {
+-		buf->mem.addr[i] = vb2_dma_contig_plane_dma_addr(vb, i);
++		buf->mem.addr[i] = vb2_dma_contig_plane_dma_addr(vb, i) +
++                           vb->planes[i].data_offset;
+ 
+ 		if (vb2_plane_size(vb, i) < format->plane_fmt[i].sizeimage)
+ 			return -EINVAL;
+-- 
+2.17.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb
new file mode 100644
index 00000000..9b723614
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb
@@ -0,0 +1,102 @@
+DESCRIPTION = "VSP Manager for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas"
+PN = "kernel-module-vspm"
+PR = "r0"
+
+VSPM_DRV_URL = "git://github.com/renesas-rcar/vspm_drv.git"
+BRANCH = "rcar_gen3"
+SRCREV = "7f854a9a1c4760255a54b7c14891d1545ed1bf43"
+
+SRC_URI = "${VSPM_DRV_URL};branch=${BRANCH}"
+
+# Fix patch for upscaling issue
+SRC_URI_append = " \
+    file://0001-Set-UDS-horizontal-scaling-phase-to-auto.patch \
+"
+
+S = "${WORKDIR}/git"
+VSPM_DRV_DIR = "vspm-module/files/vspm"
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build VSP Manager kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/${VSPM_DRV_DIR}/drv
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${KERNELSRC}/include
+    install -d ${D}/${includedir}
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPM_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${VSPM_DRV_DIR}/drv/vspm.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_public.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${KERNELSRC}/include/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${KERNELSRC}/include/
+
+    # Install shared header files
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${D}/${includedir}/
+}
+
+do_populate_sysroot[sstate-inputdirs] += "${S}/${VSPM_DRV_DIR}/include/"
+do_populate_sysroot[sstate-outputdirs] += "${KERNELSRC}/include/"
+do_populate_sysroot_setscene[prefuncs] = "vspm_sstate_check_func"
+SSTATE_DUPWHITELIST = "${KERNELSRC}/include"
+
+vspm_sstate_check_func() {
+    # An error is returned when unpack of kernel source has not been completed yet.
+    # By returning error, rebuild task runs by force (Invalidating sstate).
+    # This module installs shared header files in ${KERNELSRC}/include by
+    # sstate cache.
+    # Those files will be deleted by unpack task of kernel.
+    if [ ${WITHIN_EXT_SDK} -eq 1 ]; then
+        :
+    else
+        if [ ! -d "${KERNELSRC}/include" ]; then
+            exit 1
+        fi
+    fi
+}
+
+# Should also clean deploy/licenses directory
+# for module when do_clean.
+do_clean[cleandirs] += "${LICENSE_DIRECTORY}/${PN}"
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vspm.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-vspm"
+
+# Autoload VSPM
+KERNEL_MODULE_AUTOLOAD_append = " vspm"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm/0001-Set-UDS-horizontal-scaling-phase-to-auto.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm/0001-Set-UDS-horizontal-scaling-phase-to-auto.patch
new file mode 100644
index 00000000..17bf6233
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm/0001-Set-UDS-horizontal-scaling-phase-to-auto.patch
@@ -0,0 +1,40 @@
+From dd7dffa07065100c3164ca94a1d4395712e647cd Mon Sep 17 00:00:00 2001
+From: Damian Hobson-Garcia <dhobsong@igel.co.jp>
+Date: Mon, 3 Jun 2019 12:33:57 +0900
+Subject: [PATCH] Set UDS horizontal scaling phase to auto
+
+Use the register default settings for the scaling phase instead
+of manually calculating them.
+
+The default setting seems to calculate the phase correctly,
+which the manual settings seem to shift the output image to the left
+my an amount proportional to the scaling ratio.  i.e x16 scaling
+will shift the output by 16 pixels.
+---
+ vspm-module/files/vspm/drv/vsp/vsp_drv_phy.c | 10 ----------
+ 1 file changed, 10 deletions(-)
+
+diff --git a/vspm-module/files/vspm/drv/vsp/vsp_drv_phy.c b/vspm-module/files/vspm/drv/vsp/vsp_drv_phy.c
+index 8f63565..6f89bae 100644
+--- a/vspm-module/files/vspm/drv/vsp/vsp_drv_phy.c
++++ b/vspm-module/files/vspm/drv/vsp/vsp_drv_phy.c
+@@ -1454,16 +1454,6 @@ static void vsp_ins_replace_part_uds_module(
+ 			r_temp *= ratio;
+ 		}
+ 
+-		/* add horizontal filter phase of control register */
+-		uds_info->val_ctrl |= VSP_UDS_CTRL_AMDSLH;
+-
+-		/* replace scaling filter horizontal phase */
+-		if (l_temp & 0xfff)
+-			uds_info->val_hphase = (4096 - (l_temp & 0xfff)) << 16;
+-		else
+-			uds_info->val_hphase = 0;
+-		if (r_temp & 0xfff)
+-			uds_info->val_hphase |= (4096 - (r_temp & 0xfff));
+ 	} else {
+ 		l_temp *= 4096;
+ 		r_temp *= 4096;
+-- 
+2.17.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb
new file mode 100644
index 00000000..95e71c44
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb
@@ -0,0 +1,67 @@
+DESCRIPTION = "VSP Manager Interface driver for the R-Car Gen3"
+
+require include/rcar-gen3-modules-common.inc
+
+LICENSE = "GPLv2 & MIT"
+LIC_FILES_CHKSUM = " \
+    file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \
+"
+
+inherit module
+
+DEPENDS = "linux-renesas kernel-module-vspm"
+PN = "kernel-module-vspmif"
+PR = "r0"
+
+VSPMIF_DRV_URL = " \
+    git://github.com/renesas-rcar/vspmif_drv.git"
+BRANCH = "rcar_gen3"
+SRCREV = "6172cc7273aae0345db894faa5ab59777549c247"
+
+SRC_URI = "${VSPMIF_DRV_URL};branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+VSPMIF_DRV_DIR = "vspm_if-module/files/vspm_if"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# Build VSP Manager Interface kernel module without suffix
+KERNEL_MODULE_PACKAGE_SUFFIX = ""
+
+do_compile() {
+    cd ${S}/${VSPMIF_DRV_DIR}/drv
+    make all
+}
+
+do_install () {
+    # Create destination directories
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    install -d ${D}/${includedir}
+    install -d ${KERNELSRC}/include
+
+    # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm_if.symvers
+
+    # Install kernel module
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/vspm_if.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/
+
+    # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR)
+    # This file installed in SDK by kernel-devsrc pkg.
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${KERNELSRC}/include/
+
+    # Install shared header file
+    install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+"
+
+FILES_${PN} = " \
+    /lib/modules/${KERNEL_VERSION}/extra/vspm_if.ko \
+"
+
+RPROVIDES_${PN} += "kernel-module-vspmif kernel-module-vspm-if"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch
new file mode 100644
index 00000000..765053fa
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch
@@ -0,0 +1,32 @@
+From 5f378e5db591a4a119b6cface6037cbded240506 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Thu, 25 Oct 2018 13:25:10 +0700
+Subject: [PATCH 1/6] ADSP: add document for compatible string
+ "renesas,rcar_adsp_sound_gen3"
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+---
+ .../devicetree/bindings/sound/renesas,adsp.txt        | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/sound/renesas,adsp.txt
+
+diff --git a/Documentation/devicetree/bindings/sound/renesas,adsp.txt b/Documentation/devicetree/bindings/sound/renesas,adsp.txt
+new file mode 100644
+index 000000000000..b529bcadea82
+--- /dev/null
++++ b/Documentation/devicetree/bindings/sound/renesas,adsp.txt
+@@ -0,0 +1,11 @@
++Renesas ADSP sound driver
++
++Required properties:
++- compatible			: "renesas,rcar_adsp_sound_gen3"
++
++Example:
++
++rcar_adsp_sound: adsp_sound@0 {
++     compatible =  "renesas,rcar_adsp_sound_gen3";
++     status = "disabled";
++};
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch
new file mode 100644
index 00000000..9c38a327
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch
@@ -0,0 +1,61 @@
+From a39cada70268aadff7153e4f782bcd90a5c69d07 Mon Sep 17 00:00:00 2001
+From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+Date: Mon, 4 Dec 2017 10:56:46 +0100
+Subject: [PATCH] arm64/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT
+ program type
+
+Correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type
+by exporting the user_pt_regs structure instead of the pt_regs structure
+that is in-kernel only.
+
+Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
+Acked-by: Alexei Starovoitov <ast@kernel.org>
+Cc: Will Deacon <will.deacon@arm.com>
+Cc: Mark Rutland <mark.rutland@arm.com>
+Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+---
+ arch/arm64/include/asm/perf_event.h          | 2 ++
+ arch/arm64/include/uapi/asm/bpf_perf_event.h | 9 +++++++++
+ 2 files changed, 11 insertions(+)
+ create mode 100644 arch/arm64/include/uapi/asm/bpf_perf_event.h
+
+diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
+index 8d5cbec..f9ccc36 100644
+--- a/arch/arm64/include/asm/perf_event.h
++++ b/arch/arm64/include/asm/perf_event.h
+@@ -18,6 +18,7 @@
+ #define __ASM_PERF_EVENT_H
+ 
+ #include <asm/stack_pointer.h>
++#include <asm/ptrace.h>
+ 
+ #define	ARMV8_PMU_MAX_COUNTERS	32
+ #define	ARMV8_PMU_COUNTER_MASK	(ARMV8_PMU_MAX_COUNTERS - 1)
+@@ -79,6 +80,7 @@ struct pt_regs;
+ extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+ extern unsigned long perf_misc_flags(struct pt_regs *regs);
+ #define perf_misc_flags(regs)	perf_misc_flags(regs)
++#define perf_arch_bpf_user_pt_regs(regs) &regs->user_regs
+ #endif
+ 
+ #define perf_arch_fetch_caller_regs(regs, __ip) { \
+diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h
+new file mode 100644
+index 0000000..b551b74
+--- /dev/null
++++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h
+@@ -0,0 +1,9 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
++#define _UAPI__ASM_BPF_PERF_EVENT_H__
++
++#include <asm/ptrace.h>
++
++typedef struct user_pt_regs bpf_user_pt_regs_t;
++
++#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch
new file mode 100644
index 00000000..8c0a2af7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch
@@ -0,0 +1,27 @@
+From 1cdbf4ed4717eefa2b6237c1e63e351b62990522 Mon Sep 17 00:00:00 2001
+From: Dien Pham <dien.pham.ry@renesas.com>
+Date: Fri, 23 Feb 2018 18:29:32 +0700
+Subject: [PATCH] rpmsg: Add message to be able to configure RPMSG_VIRTIO from
+ defconfig
+
+Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
+---
+ drivers/rpmsg/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
+index 0fe6eac..5b1e61b 100644
+--- a/drivers/rpmsg/Kconfig
++++ b/drivers/rpmsg/Kconfig
+@@ -47,7 +47,7 @@ config RPMSG_QCOM_SMD
+ 	  platforms.
+ 
+ config RPMSG_VIRTIO
+-	tristate
++	tristate "Enable remote processor message and virtual I/O configure"
+ 	select RPMSG
+ 	select VIRTIO
+ 
+-- 
+1.9.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0002-ADSP-add-ADSP-sound-driver-source.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0002-ADSP-add-ADSP-sound-driver-source.patch
new file mode 100644
index 00000000..14719fba
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0002-ADSP-add-ADSP-sound-driver-source.patch
@@ -0,0 +1,7204 @@
+From 829c17a722611c39cda6926f0fac46fa586c70ef Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Mon, 17 Jun 2019 17:04:02 +0700
+Subject: [PATCH 2/6] ADSP: add ADSP sound driver source
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+
+diff --git a/include/adsp_drv/xf-adsp-drv-ext.h b/include/adsp_drv/xf-adsp-drv-ext.h
+new file mode 100644
+index 0000000..6c3dbc0
+--- /dev/null
++++ b/include/adsp_drv/xf-adsp-drv-ext.h
+@@ -0,0 +1,58 @@
++/*****************************************************************************
++ * \file       xf-adsp-driver-ext.h
++ * \brief      Header file for ADSP driver extension part
++ * \addtogroup ADSP Driver
++ ******************************************************************************
++ * \date       Oct. 21, 2017
++ * \author     Renesas Electronics Corporation
++ ******************************************************************************
++ * \par        Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_DRV_EXT_H
++#define __XF_ADSP_DRV_EXT_H
++
++/***********************************************************
++ * Extension client APIs
++ * ********************************************************/
++
++struct xf_adsp_base_cmd {
++	/* register new client for ADSP base control */
++	int (*client_register)(void **private_data);
++	/* unregister client */
++	int (*client_unregister)(void *private_data);
++	/* get data from proxy */
++	int (*recv)(void *private_data, void *buf);
++	/* send data to proxy */
++	int (*send)(void *private_data, void *buf);
++	/* wait the valid message in the response queue */
++	int (*poll)(void *private_data, int *condition);
++};
++
++/* create ADSP base control data */
++int xf_adsp_base_create(struct xf_adsp_base_cmd *cmd);
++
++/* destroy ADSP base control data */
++int xf_adsp_base_destroy(void);
++
++#endif
+diff --git a/sound/soc/adsp/Kconfig b/sound/soc/adsp/Kconfig
+new file mode 100644
+index 0000000..605261f
+--- /dev/null
++++ b/sound/soc/adsp/Kconfig
+@@ -0,0 +1,14 @@
++## SoC for ADSP driver configuration
++menu "ASoC ADSP driver"
++
++config SND_SOC_ADSP
++    tristate "SoC Audio for R-Car ADSP"
++    select SND_SIMPLE_CARD
++    select SND_SIMPLE_SCU_CARD
++    select SND_AUDIO_GRAPH_CARD
++    select SND_AUDIO_GRAPH_SCU_CARD
++    default y
++    help
++      This option enables ALSA ADSP sound supports ADSP module
++
++endmenu
+diff --git a/sound/soc/adsp/Makefile b/sound/soc/adsp/Makefile
+new file mode 100644
+index 0000000..8277fdb
+--- /dev/null
++++ b/sound/soc/adsp/Makefile
+@@ -0,0 +1,3 @@
++## Makefile for SoC ADSP driver
++snd-soc-adsp-objs	:= xf-adsp-alsa.o xf-adsp-base.o
++obj-$(CONFIG_SND_SOC_ADSP)	+= snd-soc-adsp.o
+diff --git a/sound/soc/adsp/xf-adsp-alsa.c b/sound/soc/adsp/xf-adsp-alsa.c
+new file mode 100644
+index 0000000..493ff84
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-alsa.c
+@@ -0,0 +1,3939 @@
++/** ***************************************************************************
++ * \file	 xf-adsp-alsa.c
++ * \brief	 Source file for ADSP ALSA Driver
++ * \addtogroup	 ADSP Driver
++ ******************************************************************************
++ * \date	 Oct. 21, 2017
++ * \author	 Renesas Electronics Corporation
++ ******************************************************************************
++ * \par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the "Software"),
++ * to deal in the Software without restriction, including without limitation
++ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
++ * and/or sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
++ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++ * DEALINGS IN THE SOFTWARE.
++ *****************************************************************************/
++
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/sched/signal.h>
++#include <linux/delay.h>
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/pcm-indirect.h>
++#include <linux/time.h>
++
++#include "xf-adsp-base.h"
++
++/* Name of Volume control for playback */
++#define PLAYBACK_VOLUME_CTR_NAME	"PlaybackVolume"
++
++/* Name of Volume control for capture */
++#define CAPTURE_VOLUME_CTR_NAME		"CaptureVolume"
++
++/* Name of Sample Rate control for playback */
++#define PLAYBACK_OUT_RATE_CTR_NAME	"PlaybackOutRate"
++
++/* Name of Output Channel control for playback */
++#define PLAYBACK_OUT_CHANNEL_CTR_NAME	"PlaybackOutChannel"
++
++/* Name of Sample Rate control for capture */
++#define CAPTURE_IN_RATE_CTR_NAME	"CaptureInRate"
++
++/* Name of Equalizer parameters control for playback */
++#define PLAYBACK_EQZ_CTR_NAME		"PlaybackEQZControl"
++
++/* Name of Equalizer parameters control for capture */
++#define CAPTURE_EQZ_CTR_NAME		"CaptureEQZControl"
++
++/* Name of Equalizer Switch control for playback */
++#define PLAYBACK_EQZ_SWITCH_CTR_NAME	"PlaybackEQZSwitch"
++
++/* Name of Equalizer Switch control for capture */
++#define CAPTURE_EQZ_SWITCH_CTR_NAME	"CaptureEQZSwitch"
++
++/* Name of Volume control for TDM playback */
++#define TDM_PLAYBACK_VOLUME_CTR_NAME	"TDMPlaybackVolume"
++
++/* Name of Volume control for TDM capture */
++#define TDM_CAPTURE_VOLUME_CTR_NAME	"TDMCaptureVolume"
++
++/* Name of Sample Rate control for TDM playback */
++#define TDM_PLAYBACK_OUT_RATE_CTR_NAME	"TDMPlaybackOutRate"
++
++/* Name of Sample Rate control for TDM capture */
++#define TDM_CAPTURE_IN_RATE_CTR_NAME	"TDMCaptureInRate"
++
++/* Prefix of Playback control name */
++#define PREFIX_OF_PLAYBACK_CTR_NAME	PLAYBACK_VOLUME_CTR_NAME[0]
++
++/* Prefix of Capture control name */
++#define PREFIX_OF_CAPTURE_CTR_NAME	CAPTURE_VOLUME_CTR_NAME[0]
++
++/* Prefix of TDM control name */
++#define PREFIX_OF_TDM_CTR_NAME		TDM_PLAYBACK_VOLUME_CTR_NAME[0]
++
++/* Prefix of TDM playback */
++#define TDM_PLAYBACK			TDM_PLAYBACK_VOLUME_CTR_NAME[3]
++
++/* Prefix of TDM record */
++#define TDM_CAPTURE			TDM_CAPTURE_VOLUME_CTR_NAME[3]
++
++/* Number of control for playback & capture */
++#define RDR_CONTROL_NUM		(9)
++
++/* Number of controls for TDM */
++#define TDM_CONTROL_NUM		(4)
++
++/* Indicate playback stream */
++#define DIRECT_PLAYBACK		(0)
++
++/* Indicate capture stream */
++#define DIRECT_CAPTURE		(1)
++
++/* Indicate stream number */
++#define DIRECT_NUM		(2)
++
++/* Supported frame size for playback/record function in driver */
++#define FRAME_SIZE		(1024)
++
++/* Supported frame size for TDM playback/record function in driver */
++#define TDM_FRAME_SIZE		(1024)
++
++/* Supported sample rate in driver */
++#define SND_ADSP_SAMPLE_RATES	(SNDRV_PCM_RATE_32000 | \
++				 SNDRV_PCM_RATE_44100 | \
++				 SNDRV_PCM_RATE_48000)
++
++/* Supported PCM width in driver */
++#define SND_ADSP_PCM_WIDTHS	(SNDRV_PCM_FMTBIT_S16_LE | \
++				 SNDRV_PCM_FMTBIT_S24_LE)
++
++/* Macro to control DAI index */
++/* DAI 0 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX0		(0)
++
++/* DAI 1 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX1		(1)
++
++/* DAI 2 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX2		(2)
++
++/* DAI 3 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX3		(3)
++
++/* DAI 4 index for playback/record functions of TDM formats */
++#define TDM_DAI_IDX		(4)
++
++/* Maximum number of DAI supported by driver */
++#define MAX_DAI_IDX		(5)
++
++/* Renderer/Capture software information */
++/* Minimum channel number supported */
++#define MIN_CHANNEL		(1)
++
++/* Maximum channel number supported */
++#define MAX_CHANNEL		(2)
++
++/* Minimum buffer size in byte */
++#define MIN_BUF_SIZE		(FRAME_SIZE * MIN_CHANNEL * 2)
++
++/* Maximum buffer size in byte */
++#define MAX_BUF_SIZE		(FRAME_SIZE * MAX_CHANNEL * 4)
++
++/* Minimum numbers of period in the buffer */
++#define MIN_PERIOD		(1)
++
++/* Maximum numbers of period in the buffer */
++#define MAX_PERIOD		(4)
++
++/* Maximun numbers of bytes in ALSA buffer */
++#define MAX_BUFFER_BYTES	(MAX_PERIOD * MAX_BUF_SIZE)
++
++/* TDM software information */
++/*< Minimum channel number supported in TDM plugin */
++#define TDM_MIN_CHANNEL		(6)
++
++/* Maximum channel number supported in TDM plugin */
++#define TDM_MAX_CHANNEL		(8)
++
++/* Minimum buffer size in byte for TDM format */
++#define TDM_MIN_BUF_SIZE	(TDM_FRAME_SIZE * TDM_MIN_CHANNEL * 2)
++
++/* Maximum buffer size in byte for TDM format */
++#define TDM_MAX_BUF_SIZE	(TDM_FRAME_SIZE * TDM_MAX_CHANNEL * 4)
++
++/* Minimum numbers of period in the buffer for TDM format */
++#define TDM_MIN_PERIOD		(1)
++
++/* Maximum numbers of period in the buffer for TDM format  */
++#define TDM_MAX_PERIOD		(4)
++
++/* Maximum numbers of bytes in ALSA buffer for TDM format */
++#define TDM_MAX_BUFFER_BYTES	(TDM_MAX_PERIOD * TDM_MAX_BUF_SIZE)
++
++/* Volume scale used when user set */
++#define VOLUME_SCALE		(100)
++
++/* Maximum element in Equalizer parameter control */
++#define MAX_EQZ_PARAM_NUMBER	(55)
++
++/* Equalizer control is disabled */
++#define EQZ_OFF			(0)
++
++/* Equalizer control is enabled */
++#define EQZ_ON			(1)
++
++/* Component status */
++/* Handle state is NULL */
++#define XF_HANDLE_NULL		(0)
++
++/* Handle state is CREATED after creating handle successfully */
++#define XF_HANDLE_CREATED	BIT(0)
++
++/* Handle state is READY after finishing handle init */
++#define XF_HANDLE_READY		BIT(1)
++
++/* channels */
++/* Mono stream */
++#define MONAURAL		(1)
++
++/* Stereo stream */
++#define STEREO			(2)
++
++/* define number of bytes in a sample of 24 bits format types */
++/* store 24 bits data in 4 bytes LE */
++#define FMTBIT_S24_LE_BYTES_PER_SAMPLE		(4)
++
++/* store 24 bits data in 3 bytes LE */
++#define FMTBIT_S24_3LE_BYTES_PER_SAMPLE		(3)
++
++/* helper macro to get bytes per sample number */
++#define BYTES_PER_SAMPLE(fmt)   (FMTBIT_##fmt##_BYTES_PER_SAMPLE)
++
++/* check component is created */
++#define COMPONENT_IS_CREATED(n)	(((n & XF_HANDLE_CREATED) != 0) ? TRUE : FALSE)
++
++/* check component is ready */
++#define COMPONENT_IS_READY(n)	(((n & XF_HANDLE_READY) != 0) ? TRUE : FALSE)
++
++/* indicator of stream order */
++#define MIX_UNUSED			(0)
++#define FIRST_RUN			(2)
++#define SECOND_RUN			(1)
++
++/* check MIX usage */
++#define MIX_ENABLED(mix_ctl)	((mix_ctl == SECOND_RUN) ? TRUE : FALSE)
++
++/*******************************************************************
++ * base structures for ADSP ALSA driver
++ * ****************************************************************/
++
++/** \struct snd_adsp_control
++ *  \brief  Structure stores parameters from user
++ */
++struct snd_adsp_control {
++	/* Volume rate for playback/record */
++	int	   vol_rate[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Volume rate for TDM playback/TDM record */
++	int	   tdm_vol_rate[DIRECT_NUM];
++
++	/* Out sample rate with Renderer, in sample rate with Capture */
++	int	   sample_rate[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Out sample rate for TDM Renderer, in sample rate for TDM Capture */
++	int	   tdm_sample_rate[DIRECT_NUM];
++
++	/* Output channel of playback */
++	int	   rdr_out_ch[MAX_DAI_IDX - 1];
++
++	/* Equalizer parameters */
++	struct xf_adsp_equalizer_params eqz_params[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Equalizer switch */
++	int	   eqz_switch[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Indicator of MIX usage */
++	int	   mix_usage;
++};
++
++/** \struct snd_adsp_base_info
++ *  \brief  Structure stores some base information of a stream
++ */
++struct snd_adsp_base_info {
++	/* high resolution timer data */
++	struct hrtimer			hrtimer;
++
++	/* kernel time value in nanosecond */
++	ktime_t				ktime;
++
++	/* save interrupt state before getting lock */
++	unsigned long			flag;
++
++	/* high resolution timer state */
++	int				hrt_state;
++
++	/* target handle id of ALSA driver */
++	int				handle_id;
++
++	/* data buffer */
++	char				*buffer[XF_BUF_POOL_SIZE];
++
++	/* size of each allocated data buffer */
++	int				buf_bytes;
++
++	/* data index of buffer */
++	int				buf_idx;
++
++	/* queue index of buffer */
++	int				buf_queue;
++
++	/* HW index in bytes */
++	int				hw_idx;
++
++	/* number of bytes in a period */
++	int				period_bytes;
++
++	/* substream runtime object */
++	struct snd_pcm_substream	*substream;
++
++	/* indirect PCM data transfer */
++	struct snd_pcm_indirect		pcm_indirect;
++
++	/* spinlock data */
++	spinlock_t			lock;
++
++	/* runtime error indicator */
++	int				runtime_err;
++};
++
++/** \struct snd_adsp_playback
++ *  \brief  Structure stores data for playback function
++ */
++struct snd_adsp_playback {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* Renderer component data */
++	struct xf_adsp_renderer		*renderer;
++
++	/* Equalizer component data */
++	struct xf_adsp_equalizer	*equalizer;
++
++	/* Renderer component state */
++	int				rdr_state;
++
++	/* Equalizer component state */
++	int				eqz_state;
++};
++
++/** \struct snd_adsp_record
++ *  \brief  Structure stores data for record function
++ */
++struct snd_adsp_record {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* Capture component data */
++	struct xf_adsp_capture		*capture;
++
++	/* Equalizer component data */
++	struct xf_adsp_equalizer	*equalizer;
++
++	/* Capture component state */
++	int				cap_state;
++
++	/* Equalizer component state */
++	int				eqz_state;
++};
++
++/** \struct snd_adsp_tdm_playback
++ *  \brief  Structure stores data for TDM playback function
++ */
++struct snd_adsp_tdm_playback {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* TDM Renderer component data */
++	struct xf_adsp_tdm_renderer	*tdm_renderer;
++
++	/* TDM Renderer component state */
++	int				state;
++};
++
++/** \struct snd_adsp_tdm_record
++ *  \brief  Structure stores data for TDM record function
++ */
++struct snd_adsp_tdm_record {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* TDM Capture component data */
++	struct xf_adsp_tdm_capture	*tdm_capture;
++
++	/* TDM Capture component state */
++	int				state;
++};
++
++/** \struct snd_adsp_card
++ *  \brief  Structure stores data for ALSA sound card
++ */
++struct snd_adsp_card {
++	/* playback data */
++	struct snd_adsp_playback	*playback[MAX_DAI_IDX - 1];
++
++	/* record data */
++	struct snd_adsp_record		*record[MAX_DAI_IDX - 1];
++
++	/* TDM playback data */
++	struct snd_adsp_tdm_playback	*tdm_playback;
++
++	/* TDM record data */
++	struct snd_adsp_tdm_record	*tdm_record;
++
++	/* Structure contains params information for control */
++	struct snd_adsp_control		ctr_if;
++};
++
++/** HW configuration of ALSA ADSP card for Renderer/Capture */
++static struct snd_pcm_hardware snd_pcm_adsp_hw = {
++	.info		= (SNDRV_PCM_INFO_INTERLEAVED  /* PRQA S 1053 14 */
++			 | SNDRV_PCM_INFO_RESUME
++			 | SNDRV_PCM_INFO_BLOCK_TRANSFER
++			 | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats	   = SND_ADSP_PCM_WIDTHS,
++	.rates		   = SND_ADSP_SAMPLE_RATES,
++	.rate_min	   = 32000,
++	.rate_max	   = 48000,
++	.channels_min	   = MIN_CHANNEL,
++	.channels_max	   = MAX_CHANNEL,
++
++	/* maximum buffer size in bytes */
++	.buffer_bytes_max  = MAX_BUFFER_BYTES,
++
++	/* minimum size of the periods (frame) in bytes */
++	.period_bytes_min  = MIN_BUF_SIZE,
++
++	/* maximum size of the periods (frame) in bytes */
++	.period_bytes_max  = MAX_BUF_SIZE,
++
++	/* minimum periods (frames) in a buffer */
++	.periods_min	   = MIN_PERIOD,
++
++	/* maximum periods (frames) in a buffer */
++	.periods_max	   = MAX_PERIOD,
++};
++
++/* HW configuration of ALSA ADSP card for TDM */
++static struct snd_pcm_hardware snd_pcm_adsp_tdm_hw = {
++	.info		  = (SNDRV_PCM_INFO_INTERLEAVED  /* PRQA S 1053 14 */
++			   | SNDRV_PCM_INFO_RESUME
++			   | SNDRV_PCM_INFO_BLOCK_TRANSFER
++			   | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats	  = SND_ADSP_PCM_WIDTHS,
++	.rates		  = SND_ADSP_SAMPLE_RATES,
++	.rate_min	  = 32000,
++	.rate_max	  = 48000,
++	.channels_min	  = TDM_MIN_CHANNEL,
++	.channels_max	  = TDM_MAX_CHANNEL,
++
++	/* maximum buffer size in bytes */
++	.buffer_bytes_max = TDM_MAX_BUFFER_BYTES,
++
++	/* minimum size of the periods (frame) in bytes */
++	.period_bytes_min = TDM_MIN_BUF_SIZE,
++
++	/* maximum size of the periods (frame) in bytes */
++	.period_bytes_max = TDM_MAX_BUF_SIZE,
++
++	/* minimum periods (frames) in a buffer */
++	.periods_min	  = TDM_MIN_PERIOD,
++
++	/* maximum periods (frames) in a buffer */
++	.periods_max	  = TDM_MAX_PERIOD,
++};
++
++/*******************************************************************
++ * function declaration
++ * ****************************************************************/
++
++static int
++snd_adsp_rdr_empty_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_rdr_fill_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_cap_empty_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_cap_fill_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_get_dai_id_from_substream(struct snd_pcm_substream *substream);
++static void *
++snd_adsp_get_drvdata_from_substream(struct snd_pcm_substream *substream);
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_substream(struct snd_pcm_substream *substream);
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_hrt(struct hrtimer *hrt);
++static enum hrtimer_restart snd_adsp_hrtimer_func(struct hrtimer *hrt);
++static int snd_adsp_playback_init(struct snd_adsp_playback **data,
++				  int eqz_flag,
++				  struct snd_pcm_substream *substream);
++static int snd_adsp_record_init(struct snd_adsp_record **data,
++				int eqz_flag,
++				struct snd_pcm_substream *substream);
++static int snd_adsp_playback_prepare(struct snd_adsp_playback *playback,
++				     struct snd_pcm_substream *substream);
++static int snd_adsp_record_prepare(struct snd_adsp_record *record,
++				   struct snd_pcm_substream *substream);
++static int snd_adsp_playback_deinit(struct snd_adsp_playback *playback);
++static int snd_adsp_record_deinit(struct snd_adsp_record *record);
++static int snd_adsp_tdm_playback_init(struct snd_adsp_tdm_playback **data,
++				      struct snd_pcm_substream *substream);
++static int snd_adsp_tdm_record_init(struct snd_adsp_tdm_record **data,
++				    struct snd_pcm_substream *substream);
++static int
++snd_adsp_tdm_playback_prepare(struct snd_adsp_tdm_playback *tdm_playback,
++			      struct snd_pcm_substream *substream);
++static int snd_adsp_tdm_record_prepare(struct snd_adsp_tdm_record *tdm_record,
++				       struct snd_pcm_substream *substream);
++static int
++snd_adsp_tdm_playback_deinit(struct snd_adsp_tdm_playback *tdm_playback);
++static int snd_adsp_tdm_record_deinit(struct snd_adsp_tdm_record *tdm_record);
++static int snd_adsp_pcm_open(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_close(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_hw_params(struct snd_pcm_substream *substream,
++				  struct snd_pcm_hw_params *hw_params);
++static int snd_adsp_pcm_hw_free(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_prepare(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_trigger(struct snd_pcm_substream *substream, int idx);
++static snd_pcm_uframes_t
++snd_adsp_pcm_pointer(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_ack(struct snd_pcm_substream *substream);
++static void snd_adsp_pcm_transfer(struct snd_pcm_substream *substream,
++				  struct snd_pcm_indirect *rec, size_t bytes);
++static int snd_adsp_control_volume_info(struct snd_kcontrol *kcontrol,
++					struct snd_ctl_elem_info *uinfo);
++static int snd_adsp_control_volume_get(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_volume_put(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_eqz_get(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_eqz_info(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_info *uinfo);
++static int snd_adsp_control_eqz_put(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_get(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_info(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_info *uinfo);
++static int
++snd_adsp_control_sample_rate_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_sample_rate_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo);
++static int
++snd_adsp_control_sample_rate_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_put(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol);
++static void snd_adsp_get_eqz_params_from_control(
++				struct xf_adsp_equalizer_params *eqz_params,
++				struct xf_adsp_equalizer_params *eqz_ctr_params,
++				bool flag);
++static int snd_adsp_pcm_new(struct snd_soc_pcm_runtime *runtime);
++static int snd_adsp_probe(struct platform_device *pdev);
++static int snd_adsp_remove(struct platform_device *pdev);
++
++/*******************************************************************
++ * callback function of ADSP control interface
++ * ****************************************************************/
++/** **************************************************************************
++ *  \brief	event handler callback to notify error from ADSP
++ *
++ *  \param[in]	data		Pointer to ADSP ALSA sound card
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_event_handler(void *data)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base)
++		base->runtime_err = TRUE;
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 empty buf done callback for playback/TDM playback functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_rdr_empty_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->buf_queue++;
++		base->hw_idx += length; /* increase the DMA buffer index */
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 fill buf done callback for playback/TDM playback functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_rdr_fill_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 empty buf done callback for record/TDM record functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_cap_empty_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 fill buf done callback for record/TDM record functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ * \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_cap_fill_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->buf_queue++;
++		base->hw_idx += length; /* increase the DMA buffer index */
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	return 0;
++}
++
++/** callback functions for playback/TDM playback */
++static struct xf_callback_func rdr_callbacks =	/* PRQA S 3218 */
++{
++	.empty_buf_done = &snd_adsp_rdr_empty_buf_done,	/* PRQA S 1053 2 */
++	.fill_buf_done = &snd_adsp_rdr_fill_buf_done,
++	.event_handler = &snd_adsp_event_handler
++};
++
++/** callback functions for record/TDM record */
++static struct xf_callback_func cap_callbacks =	/* PRQA S 3218 */
++{
++	.empty_buf_done = &snd_adsp_cap_empty_buf_done,	/* PRQA S 1053 2 */
++	.fill_buf_done = &snd_adsp_cap_fill_buf_done,
++	.event_handler = &snd_adsp_event_handler
++};
++
++/*******************************************************************
++ * helper functions to get some internal data
++ * ****************************************************************/
++
++/** **************************************************************************
++ *  \brief	Get current index of CPU DAI from runtime data of substream
++ *
++ *  \param[in]	  substream	Pointer to PCM stream data
++ *  \retval	  id		Index of current CPU DAI
++ *****************************************************************************/
++static int
++snd_adsp_get_dai_id_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_soc_pcm_runtime *rtd;
++
++	rtd = (struct snd_soc_pcm_runtime *)substream->private_data;
++	return rtd->cpu_dai->id;
++}
++
++/** **************************************************************************
++ *  \brief	Get ADSP ALSA driver's data from runtime data of substream
++ *
++ *  \param[in]	substream	Pointer to PCM stream data
++ *  \retval	pointer		Pointer to driver's data
++ *****************************************************************************/
++static void *
++snd_adsp_get_drvdata_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_soc_pcm_runtime *rtd;
++
++	rtd = (struct snd_soc_pcm_runtime *)substream->private_data;
++	return snd_soc_dai_get_drvdata(rtd->cpu_dai);
++}
++
++/** **************************************************************************
++ *  \brief   Get base's data of playback/record from runtime data of substream
++ *
++ *  \param[in]	substream	Pointer to PCM stream data
++ *  \retval	pointer		Pointer to playback/record's base data
++ *****************************************************************************/
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	struct snd_adsp_base_info *base;
++	int dai_idx;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++
++	/* get DAI index of substream */
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++
++	/* get base data of the substream */
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			base = !adsp_card->playback[dai_idx] ?
++				NULL : &adsp_card->playback[dai_idx]->base;
++		} else {
++			base = !adsp_card->record[dai_idx] ?
++				NULL : &adsp_card->record[dai_idx]->base;
++		}
++	} else {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			base = !adsp_card->tdm_playback ?
++				NULL : &adsp_card->tdm_playback->base;
++		} else {
++			base = !adsp_card->tdm_record ?
++				NULL : &adsp_card->tdm_record->base;
++		}
++	}
++
++	return base;
++}
++
++/** ***************************************************************************
++ *  \brief    Get playback/record/TDM playback/TDM record's base data
++ *	      from hr timer data
++ *
++ *  \param[in]	hrt		Pointer to hr timer data
++ *  \retval	pointer		Pointer to playback/record's base data
++ *****************************************************************************/
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_hrt(struct hrtimer *hrt)
++{
++	return (struct snd_adsp_base_info *)hrt;
++}
++
++/*****************************************************************************
++ * hrtimer interrupt function
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Interrupt function of high resolution timer
++ *
++ *  \param[in]	hrt		Pointer to hr timer data
++ *  \retval	HRTIMER_RESTART Restart the timer after expire time
++ *****************************************************************************/
++static enum hrtimer_restart snd_adsp_hrtimer_func(struct hrtimer *hrt)
++{
++	struct snd_adsp_base_info *base = snd_adsp_get_base_from_hrt(hrt);
++
++	spin_lock_irqsave(&base->lock, base->flag);
++	if (base->hw_idx != 0) {
++		spin_unlock_irqrestore(&base->lock, base->flag);
++		/* update PCM status for the next period */
++		snd_pcm_period_elapsed(base->substream);
++	} else {
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	hrtimer_forward_now(hrt, base->ktime);
++
++	return HRTIMER_RESTART;
++}
++
++/*****************************************************************************
++ * internal functions to manage playback and record functions
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Initialize playback data
++ *
++ *  \param[out]	  playback_data		Pointer to store playback data
++ *  \param[in]	  eqz_flag		Flag to indicate equalizer usage
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  EINVAL		Failed to initialize playback data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_playback_init(struct snd_adsp_playback **playback_data,
++				  int eqz_flag,
++				  struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_playback *playback;
++
++	/* allocate memory for playback data */
++	playback = kmalloc(sizeof(*playback), GFP_KERNEL);
++	if (!playback)
++		return -EINVAL;
++
++	/* init params */
++	memset(playback, 0, sizeof(struct snd_adsp_playback));
++
++	/* save the playback data */
++	*playback_data = playback;
++
++	/* set handle state as NULL state */
++	playback->rdr_state = XF_HANDLE_NULL;
++	playback->eqz_state = XF_HANDLE_NULL;
++	playback->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register renderer component */
++	if (xf_adsp_renderer_create(&playback->renderer,
++				    &rdr_callbacks,
++				    (void *)&playback->base) < 0)
++		return -EINVAL;
++
++	/* mark renderer component created */
++	playback->rdr_state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as renderer ID */
++	playback->base.handle_id = playback->renderer->handle_id;
++
++	if (eqz_flag == EQZ_ON) {
++		/* create equalizer component when equalizer is used */
++		if (xf_adsp_equalizer_create(&playback->equalizer,
++					     &rdr_callbacks,
++					     (void *)&playback->base) < 0)
++			return -EINVAL;
++
++		/* mark equalizer component created */
++		playback->eqz_state = XF_HANDLE_CREATED;
++
++		/* set target handle ID as equalizer ID */
++		playback->base.handle_id = playback->equalizer->handle_id;
++	}
++
++	/* init lock */
++	spin_lock_init(&playback->base.lock);
++
++	/* save the substream data */
++	playback->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&playback->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	playback->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	playback->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Initialize record data
++ *
++ *  \param[out]	 record_data	Pointer to store record data
++ *  \param[in]	 eqz_flag	Flag to indicate equalizer usage
++ *  \param[in]	 substream	Pointer to substream data
++ *  \retval	-EINVAL		Failed to initialize record data
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_record_init(struct snd_adsp_record **record_data,
++				int eqz_flag,
++				struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_record *record;
++
++	/* allocate memory for record data */
++	record = kmalloc(sizeof(*record), GFP_KERNEL);
++	if (!record)
++		return -EINVAL;
++
++	/* init params */
++	memset(record, 0, sizeof(struct snd_adsp_record));
++
++	/* save the record data */
++	*record_data = record;
++
++	/* set handle state as NULL state */
++	record->cap_state = XF_HANDLE_NULL;
++	record->eqz_state = XF_HANDLE_NULL;
++	record->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register capture component */
++	if (xf_adsp_capture_create(&record->capture,
++				   &cap_callbacks,
++				   (void *)&record->base) < 0)
++		return -EINVAL;
++
++	/* mark capture component created */
++	record->cap_state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as capture ID */
++	record->base.handle_id = record->capture->handle_id;
++
++	/* create equalizer component in case of it being used */
++	if (eqz_flag == EQZ_ON) {
++		if (xf_adsp_equalizer_create(&record->equalizer,
++					     &cap_callbacks,
++					     (void *)&record->base) < 0)
++			return -EINVAL;
++
++		/* mark equalizer component created */
++		record->eqz_state = XF_HANDLE_CREATED;
++
++		/* set target handle ID as equalizer ID */
++		record->base.handle_id = record->equalizer->handle_id;
++	}
++
++	/* init lock */
++	spin_lock_init(&record->base.lock);
++
++	/* save the substream data */
++	record->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&record->base.hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	record->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	record->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare playback function
++ *
++ *  \param[out]	  playback		Pointer to playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	 -EINVAL		Failed to prepare playback function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_playback_prepare(struct snd_adsp_playback *playback,
++				     struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	int dai_idx, pcm_width, ch, fs, frame_size, vol_rate, hw_buffer_size;
++	int out_rate;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_renderer *renderer;
++	struct xf_adsp_equalizer *equalizer;
++	struct snd_adsp_base_info *base;
++	int i;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	renderer = playback->renderer;
++	equalizer = playback->equalizer;
++	base = &playback->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	ch = runtime->channels;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++	vol_rate = ctr_if->vol_rate[DIRECT_PLAYBACK][dai_idx];
++	out_rate = ctr_if->sample_rate[DIRECT_PLAYBACK][dai_idx];
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = (base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE);
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* it should equal to a period size in bytes */
++	base->pcm_indirect.hw_queue_size = base->period_bytes;
++
++	/* set parameters when Renderer is not ready */
++	if (COMPONENT_IS_READY(playback->rdr_state) == FALSE) {
++		struct xf_adsp_renderer_params *params = &renderer->params;
++
++		/* apply renderer parameters */
++		params->in_rate = fs;
++		params->channel = ch;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		if (ctr_if->mix_usage == SECOND_RUN)
++			params->mix_ctrl = ctr_if->mix_usage;
++		else
++			params->mix_ctrl = MIX_UNUSED;
++
++		/* set flow as ADSP->PDMA0->SRC0->PDMA1->SSI0 */
++		params->dev1 = SRC0;
++		params->dev2 = SSI00;
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++
++		/* when MIX is enabled, change to DMAC transfer type to save */
++		/* hw FIFO */
++		if (MIX_ENABLED(params->mix_ctrl) == TRUE)
++			params->dma1 = ADMAC_CH01;
++
++		/* set volume rate if it is set by user or default value */
++		/* is 100% */
++		if (vol_rate >= 0)
++			params->vol_rate = vol_rate;
++		else
++			params->vol_rate = (1 << 20);
++
++		/* set output channel if it is set by user */
++		if (ctr_if->rdr_out_ch[dai_idx] >= MONAURAL)
++			params->out_channel = ctr_if->rdr_out_ch[dai_idx];
++		else
++			params->out_channel = params->channel;
++
++		/* set sample rate output if it is set by user */
++		if (out_rate >= 0)
++			params->out_rate = out_rate;
++
++		/* set parameters to ADSP Renderer plugin */
++		if (xf_adsp_renderer_set_params(renderer) != 0)
++			return -EINVAL;
++
++		/* allocate buffer pool to prepare the execution */
++		renderer->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(renderer->buf_pool))	/* PRQA S 306*/
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					renderer->buf_pool, i);
++
++			base->buf_queue++;
++			memset(base->buffer[i], 0, base->buf_bytes);
++		}
++
++		/* mark Renderer ready */
++		playback->rdr_state |= XF_HANDLE_READY;
++
++		/* set parameters for Equalizer if it is used */
++		if (COMPONENT_IS_CREATED(playback->eqz_state) == TRUE) {
++			/* apply Equalizer parameter setting */
++			equalizer->params.channel = ch;
++			equalizer->params.pcm_width = pcm_width;
++			equalizer->params.rate = fs;
++
++			/* get equalizer parameters from control interface */
++			/* data */
++			snd_adsp_get_eqz_params_from_control(
++				&equalizer->params,
++				&ctr_if->eqz_params[DIRECT_PLAYBACK][dai_idx],
++				true);
++
++			/* set parameters to Equalizer plugin */
++			if (xf_adsp_equalizer_set_params(equalizer) != 0)
++				return -EINVAL;
++
++			/* route Equalizer to Renderer */
++			if (xf_adsp_route(equalizer->handle_id,
++					  renderer->handle_id,
++					  XF_BUF_POOL_SIZE,
++					  base->buf_bytes) != 0)
++				return -EINVAL;
++
++			/* mark Equalizer ready */
++			playback->eqz_state |= XF_HANDLE_READY;
++
++			/* prepare data before start PCM */
++			/* PRQA S 2462 1 */ /* PRQA S 2463 1 */
++			for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++				/* send buffer to plugin to kick */
++				/* init-processing */
++				if (xf_adsp_empty_this_buffer(
++							base->handle_id,
++							base->buffer[i],
++							base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++			}
++		} else {
++			/* send zero buffer to plugin to kick */
++			/* init-processing */
++			if (xf_adsp_empty_this_buffer(base->handle_id,
++						      base->buffer[0],
++						      base->buf_bytes) != 0)
++				return -EINVAL;
++
++			spin_lock_irqsave(&base->lock, base->flag);
++			base->buf_queue--;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++		}
++
++		/* wait until all the buffer have been consummed */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset HW index */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare record function
++ *
++ *  \param[out]	  record		Pointer to record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	 -EINVAL		Failed to prepare record function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_record_prepare(struct snd_adsp_record *record,
++				   struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	int dai_idx, pcm_width, ch, fs, frame_size, vol_rate, in_rate;
++	int hw_buffer_size, hw_queue_size;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_capture *capture;
++	struct xf_adsp_equalizer *equalizer;
++	struct snd_adsp_base_info *base;
++	int i;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	capture = record->capture;
++	equalizer = record->equalizer;
++	base = &record->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	ch = runtime->channels;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++	vol_rate = ctr_if->vol_rate[DIRECT_CAPTURE][dai_idx];
++	in_rate = ctr_if->sample_rate[DIRECT_CAPTURE][dai_idx];
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* total size of allocated buffers */
++	hw_queue_size = base->period_bytes * XF_BUF_POOL_SIZE;
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = ((base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++	base->pcm_indirect.hw_queue_size = hw_queue_size;
++
++	/* prepare parameters to set to Capture plugin when it is not yet */
++	/* ready */
++	if (COMPONENT_IS_READY(record->cap_state) == FALSE) {
++		struct xf_adsp_capture_params *params = &capture->params;
++
++		/* apply capture parameters */
++		params->out_rate = fs;
++		params->channel = ch;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		params->dev1 = SRC0;
++		params->dev2 = SSI10;
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++
++		/* set volume rate if it is set by user or default volume as */
++		/* 100% */
++		if (vol_rate >= 0)
++			params->vol_rate = vol_rate;
++		else
++			params->vol_rate = (1 << 20);
++
++		/* set sample rate input if it is set by user */
++		if (in_rate >= 0)
++			params->in_rate = in_rate;
++
++		/* allocate buffer pool to prepare the execution */
++		capture->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(capture->buf_pool))		 /* PRQA S 306 */
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					capture->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* set parameters to ADSP Capture plugin */
++		if (xf_adsp_capture_set_params(capture) != 0)
++			return -EINVAL;
++
++		/* mark Capture ready */
++		record->cap_state |= XF_HANDLE_READY;
++
++		/* set parameters for Equalizer if it's used */
++		if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++			/* apply Equalizer parameter setting */
++			equalizer->params.channel = ch;
++			equalizer->params.pcm_width = pcm_width;
++			equalizer->params.rate = fs;
++
++			/* get equalizer parameter from control interface */
++			/* data */
++			snd_adsp_get_eqz_params_from_control(
++				&equalizer->params,
++				&ctr_if->eqz_params[DIRECT_CAPTURE][dai_idx],
++				true);
++
++			/* set parameters to Equalizer plugin */
++			if (xf_adsp_equalizer_set_params(equalizer) != 0)
++				return -EINVAL;
++
++			/* route Capture to Equalizer */
++			if (xf_adsp_route(capture->handle_id,
++					  equalizer->handle_id,
++					  XF_BUF_POOL_SIZE,
++					  base->buf_bytes) != 0)
++				return -EINVAL;
++
++			/* mark Equalizer ready */
++			record->eqz_state |= XF_HANDLE_READY;
++		}
++
++		/* kick init process by sending a zero buffer length */
++		xf_adsp_fill_this_buffer(base->handle_id, base->buffer[0], 0);
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until finishing initialization */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++			/* PRQA S 2462 1 */ /* PRQA S 2463 1 */
++			for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++				/* send buffer to plugin */
++				if (xf_adsp_fill_this_buffer(
++						base->handle_id,
++						base->buffer[i],
++						base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++			}
++
++			/* wait until all the buffer have been responsed */
++			while (base->buf_queue != XF_BUF_POOL_SIZE) {
++				schedule_timeout_interruptible(2);
++				if (signal_pending(current))
++					break;
++
++				/* check the error from initialization */
++				if (base->runtime_err)
++					return -EINVAL;
++			}
++		}
++
++		/* reset hw data position */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize playback function
++ *
++ *  \param[out]	playback	Pointer to playback data
++ *  \retval	-EINVAL		Failed to deinitialize playback function
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_playback_deinit(struct snd_adsp_playback *playback)
++{
++	int ret = 0;
++
++	/* perform de-initialization if playback has been created already */
++	if (playback) {
++		/* perform completion process */
++		if (COMPONENT_IS_CREATED(playback->rdr_state) == TRUE) {
++			/* send buffer with zero length to plugin for */
++			/* completion process *//* PRQA S 3200 2 */
++			xf_adsp_empty_this_buffer(playback->base.handle_id,
++						  NULL, 0);
++
++			/* free buffer pool */ /* PRQA S 3200 1 */
++			xf_adsp_free_mem_pool(playback->renderer->buf_pool);
++
++			/* destroy Renderer */
++			if (xf_adsp_renderer_destroy(playback->renderer) != 0)
++				ret = -EINVAL;
++
++			playback->renderer = NULL;
++		}
++
++		/* destroy Equalizer if it is used */
++		if (COMPONENT_IS_CREATED(playback->eqz_state) == TRUE) {
++			if (xf_adsp_equalizer_destroy(playback->equalizer))
++				ret = -EINVAL;
++
++			playback->equalizer = NULL;
++		}
++
++		/* canncel timer interrupt */
++		if (COMPONENT_IS_CREATED(playback->base.hrt_state) == TRUE)
++			hrtimer_cancel(&playback->base.hrtimer);
++
++		/* free playback data */
++		kfree(playback);
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize record function
++ *
++ *  \param[out]	 record		Pointer to record data
++ *  \retval	 -EINVAL	Failed to deinitialize record function
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_record_deinit(struct snd_adsp_record *record)
++{
++	int ret = 0;
++
++	/* perform de-initialization if record has been created already */
++	if (!record)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(record->cap_state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process *//* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(record->base.handle_id, NULL, 0);
++
++		/* free buffer pool */ /* PRQA S 3200 1 */
++		xf_adsp_free_mem_pool(record->capture->buf_pool);
++
++		if (xf_adsp_capture_destroy(record->capture))
++			ret = -EINVAL;
++
++		record->capture = NULL;
++	}
++
++	/* destroy Equalizer if it is used */
++	if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++		if (xf_adsp_equalizer_destroy(record->equalizer) != 0)
++			ret = -EINVAL;
++
++		record->equalizer = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(record->base.hrt_state) == TRUE)
++		hrtimer_cancel(&record->base.hrtimer);
++
++	/* free record data */
++	kfree(record);
++
++	return ret;
++}
++
++/*****************************************************************************
++ * internal functions to manage TDM playback and TDM record functions
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Initialize TDM playback data
++ *
++ *  \param[out]	tdm_playback_data	Pointer to store TDM playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to initialize TDM playback data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_init(struct snd_adsp_tdm_playback **tdm_playback_data,
++			   struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_tdm_playback *tdm_playback;
++
++	/* allocate memory for TDM playback data */
++	tdm_playback = kmalloc(sizeof(*tdm_playback), GFP_KERNEL);
++
++	if (!tdm_playback)
++		return -EINVAL;
++
++	/* init params */
++	memset(tdm_playback, 0, sizeof(struct snd_adsp_tdm_playback));
++
++	/* save the TDM playback data */
++	*tdm_playback_data = tdm_playback;
++
++	/* set handle state as NULL state */
++	tdm_playback->state = XF_HANDLE_NULL;
++	tdm_playback->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register TDM renderer component */
++	if (xf_adsp_tdm_renderer_create(&tdm_playback->tdm_renderer,
++					&rdr_callbacks,
++					(void *)&tdm_playback->base) < 0)
++		return -EINVAL;
++
++	/* mark TDM renderer component created */
++	tdm_playback->state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as TDM renderer ID */
++	tdm_playback->base.handle_id = tdm_playback->tdm_renderer->handle_id;
++
++	/* init lock */
++	spin_lock_init(&tdm_playback->base.lock);
++
++	/* save the substream data */
++	tdm_playback->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&tdm_playback->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	tdm_playback->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	tdm_playback->base.hrt_state = XF_HANDLE_CREATED;
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Initialize TDM record data
++ *
++ *  \param[out]	  tdm_record_data	Pointer to store TDM record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to initialize TDM record data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_record_init(struct snd_adsp_tdm_record **tdm_record_data,
++			 struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_tdm_record *tdm_record;
++
++	/* allocate memory for TDM record data */
++	tdm_record = kmalloc(sizeof(*tdm_record), GFP_KERNEL);
++	if (!tdm_record)
++		return -EINVAL;
++
++	/* init params */
++	memset(tdm_record, 0, sizeof(struct snd_adsp_tdm_record));
++
++	/* save the TDM record data */
++	*tdm_record_data = tdm_record;
++
++	/* set handle state as NULL state */
++	tdm_record->state = XF_HANDLE_NULL;
++	tdm_record->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register TDM Capture component */
++	if (xf_adsp_tdm_capture_create(&tdm_record->tdm_capture,
++				       &cap_callbacks,
++				       (void *)&tdm_record->base) != 0)
++		return -EINVAL;
++
++	/* mark TDM capture component created */
++	tdm_record->state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as TDM capture ID */
++	tdm_record->base.handle_id = tdm_record->tdm_capture->handle_id;
++
++	/* init lock */
++	spin_lock_init(&tdm_record->base.lock);
++
++	/* save the substream data */
++	tdm_record->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&tdm_record->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	tdm_record->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	tdm_record->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare TDM playback function
++ *
++ *  \param[out]	  tdm_playback		Pointer to TDM playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to prepare TDM playback function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_prepare(struct snd_adsp_tdm_playback *tdm_playback,
++			      struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_tdm_renderer *tdm_renderer;
++	struct snd_adsp_base_info *base;
++	int i;
++	int pcm_width, ch_mode, fs, frame_size, hw_buffer_size;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	tdm_renderer = tdm_playback->tdm_renderer;
++	base = &tdm_playback->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++
++	ch_mode = (runtime->channels == 8) ?
++		XA_TDM_RDR_CHANNEL_MODE_1X8 : XA_TDM_RDR_CHANNEL_MODE_1X6;
++
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = ((base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* it should equal to a period size in bytes */
++	base->pcm_indirect.hw_queue_size = base->period_bytes;
++
++	/* prepare parameters to set to TDM playback as it is not ready */
++	if (COMPONENT_IS_READY(tdm_playback->state) == FALSE) {
++		struct xf_adsp_tdm_renderer_params *params;
++
++		params = &tdm_renderer->params;
++
++		/* apply renderer parameters */
++		params->in_rate = fs;
++		params->ch_mode = ch_mode;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		/* setting Audio device indexes */
++		params->dma1 = ADMAC_CH00; /* use DMAC for transfer data */
++		params->dma2 = PDMA_CH03;
++		params->dev1 = SRC1;
++		params->dev2 = SSI30;  /* set SSI index to SSI30 */
++
++		/* set volume rate if it is set by user or default value as */
++		/* 100% */
++		params->vol_rate = (ctr_if->tdm_vol_rate[DIRECT_PLAYBACK] >= 0)
++			? ctr_if->tdm_vol_rate[DIRECT_PLAYBACK] : (1 << 20);
++
++		/* set output sampling rate if it is set by user */
++		if (ctr_if->tdm_sample_rate[DIRECT_PLAYBACK] >= 0)
++			params->out_rate =
++				ctr_if->tdm_sample_rate[DIRECT_PLAYBACK];
++
++		/* set parameters to ADSP TDM Renderer plugin */
++		if (xf_adsp_tdm_renderer_set_params(tdm_renderer) != 0)
++			return -EINVAL;
++
++		/* allocate buffer pool to prepare the execution */
++		tdm_renderer->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(tdm_renderer->buf_pool))	/* PRQA S 306*/
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					tdm_renderer->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* mark TDM Renderer created */
++		tdm_playback->state |= XF_HANDLE_READY;
++
++		/* send zero buffer to plugin to kick init-processing */
++		memset(base->buffer[0], 0, base->buf_bytes);
++
++		if (xf_adsp_empty_this_buffer(base->handle_id, base->buffer[0],
++					      base->buf_bytes) != 0)
++			return -EINVAL;
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until all the buffer have been consummed */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset HW index */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare TDM record function
++ *
++ *  \param[out]	  tdm_record		Pointer to TDM record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to prepare TDM record function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_tdm_record_prepare(struct snd_adsp_tdm_record *tdm_record,
++				       struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card =
++		snd_adsp_get_drvdata_from_substream(substream);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct xf_adsp_tdm_capture *tdm_capture = tdm_record->tdm_capture;
++	struct snd_adsp_base_info *base = &tdm_record->base;
++	int i;
++	int pcm_width, ch_mode, fs, frame_size;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++
++	ch_mode = (runtime->channels == 8) ?
++		XA_TDM_RDR_CHANNEL_MODE_1X8 : XA_TDM_RDR_CHANNEL_MODE_1X6;
++
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++	base->buf_bytes = (pcm_width == 16) ?
++			   base->period_bytes : ((base->period_bytes *
++						BYTES_PER_SAMPLE(S24_3LE)) /
++						BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* total size of allocated buffers */
++	base->pcm_indirect.hw_queue_size = base->period_bytes *
++					   XF_BUF_POOL_SIZE;
++
++	/* prepare parameters to set to TDM Capture as it is not yet ready */
++	if (COMPONENT_IS_READY(tdm_record->state) == FALSE) {
++		struct xf_adsp_tdm_capture_params *params;
++
++		params = &tdm_capture->params;
++
++		/* apply capture parameters */
++		params->out_rate = fs;
++		params->ch_mode = ch_mode;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		/* setting Audio device indexes */
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++		params->dev1 = SRC0;
++		params->dev2 = SSI40;  /* set input device is SSI40 */
++
++		/* set volume rate if it is set by user or default value as */
++		/* 100% */
++		params->vol_rate = (ctr_if->tdm_vol_rate[DIRECT_CAPTURE] >= 0)
++			? ctr_if->tdm_vol_rate[DIRECT_CAPTURE] : (1 << 20);
++
++		/* set input rate if it is set by user */
++		if (ctr_if->tdm_sample_rate[DIRECT_CAPTURE] >= 0) {
++			params->in_rate =
++				ctr_if->tdm_sample_rate[DIRECT_CAPTURE];
++		}
++
++		/* allocate buffer pool to prepare the execution */
++		tdm_capture->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(tdm_capture->buf_pool))	/* PRQA S 306 */
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					tdm_capture->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* set parameters to ADSP TDM Capture plugin */
++		if (xf_adsp_tdm_capture_set_params(tdm_capture) != 0)
++			return -EINVAL;
++
++		/* mark TDM Capture ready */
++		tdm_record->state |= XF_HANDLE_READY;
++
++		/* kick init process by sending a zero buffer length */
++		xf_adsp_fill_this_buffer(base->handle_id, base->buffer[0], 0);
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until finishing initialization */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset hw data position */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize TDM playback function
++ *
++ *  \param[out]	  tdm_playback	Pointer to TDM playback data
++ *  \retval	  -EINVAL	Failed to deinitialize TDM playback function
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_deinit(struct snd_adsp_tdm_playback *tdm_playback)
++{
++	int ret = 0;
++
++	/* perform de-initialization if TDM playback has been created */
++	if (!tdm_playback)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(tdm_playback->state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process */
++		/* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(tdm_playback->base.handle_id,
++					  NULL, 0);
++
++		/* free buffer pool *//* PRQA S 3200 2 */
++		xf_adsp_free_mem_pool(tdm_playback->tdm_renderer->buf_pool);
++
++		/* destroy TDM Renderer component */
++		if (xf_adsp_tdm_renderer_destroy(
++				tdm_playback->tdm_renderer) != 0)
++			ret = -EINVAL;
++
++		tdm_playback->tdm_renderer = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(tdm_playback->base.hrt_state) == TRUE)
++		hrtimer_cancel(&tdm_playback->base.hrtimer);
++
++	/* free playback data */
++	kfree(tdm_playback);
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize TDM record function
++ *
++ *  \param[out]	 tdm_record	Pointer to TDM record data
++ *  \retval	 -EINVAL	Failed to deinitialize TDM record function
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_tdm_record_deinit(struct snd_adsp_tdm_record *tdm_record)
++{
++	int ret = 0;
++
++	/* perform de-initialization if TDM record has been created already */
++	if (!tdm_record)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(tdm_record->state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process */
++		/* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(tdm_record->base.handle_id, NULL, 0);
++
++		/* free buffer pool *//* PRQA S 3200 2 */
++		xf_adsp_free_mem_pool(tdm_record->tdm_capture->buf_pool);
++
++		/* destroy TDM Capture component */
++		if (xf_adsp_tdm_capture_destroy(tdm_record->tdm_capture) != 0)
++			ret = -EINVAL;
++
++		tdm_record->tdm_capture = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(tdm_record->base.hrt_state) == TRUE)
++		hrtimer_cancel(&tdm_record->base.hrtimer);
++
++	/* free record data */
++	kfree(tdm_record);
++
++	return ret;
++}
++
++/*****************************************************************************
++ * callback functions of ADSP ALSA driver
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	 Open a playback/TDM playback or record/TDM record stream
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_open(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *adsp_card;
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	struct snd_adsp_control *ctr_if;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		/* register data for playback/record functions */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			/* perform playback initialization */
++			if (snd_adsp_playback_init(
++				   &adsp_card->playback[dai_idx],
++				   ctr_if->eqz_switch[DIRECT_PLAYBACK][dai_idx],
++				   substream) < 0) {
++				/* perform playback de-initialization when */
++				/* the initialization fails */
++				snd_adsp_playback_deinit(
++						adsp_card->playback[dai_idx]);
++
++				adsp_card->playback[dai_idx] = NULL;
++				return -EINVAL;
++			}
++		} else {
++			/* perform record initialization */
++			if (snd_adsp_record_init(
++				    &adsp_card->record[dai_idx],
++				    ctr_if->eqz_switch[DIRECT_CAPTURE][dai_idx],
++				    substream) < 0) {
++				/* perform record de-initialization when the */
++				/* initialization fails */
++				snd_adsp_record_deinit(
++						adsp_card->record[dai_idx]);
++
++				adsp_card->record[dai_idx] = NULL;
++				return -EINVAL;
++			}
++		}
++
++		/* save the hardware parameters */
++		snd_soc_set_runtime_hwparams(substream, &snd_pcm_adsp_hw);
++
++		/* each period has a frame size */
++		snd_pcm_hw_constraint_single(substream->runtime,
++					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
++					     FRAME_SIZE);
++	} else {
++		/* register data for TDM playback/record functions */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			/* perform TDM playback initialization */
++			if (snd_adsp_tdm_playback_init(
++						&adsp_card->tdm_playback,
++						substream) < 0) {
++				/* perform TDM playback de-initialization */
++				/* when the initialization fails */
++				snd_adsp_tdm_playback_deinit(
++						adsp_card->tdm_playback);
++
++				adsp_card->tdm_playback = NULL;
++				return -EINVAL;
++			}
++		} else {
++			/* perform TDM record initialization */
++			if (snd_adsp_tdm_record_init(&adsp_card->tdm_record,
++						     substream) < 0) {
++				/* perform TDM record de-initialization */
++				/* when the initialization fails */
++				snd_adsp_tdm_record_deinit(
++						adsp_card->tdm_record);
++
++				adsp_card->tdm_record = NULL;
++				return -EINVAL;
++			}
++		}
++
++		/* save the hardware parameters */
++		snd_soc_set_runtime_hwparams(substream, &snd_pcm_adsp_tdm_hw);
++
++		/* each period has a frame size */
++		snd_pcm_hw_constraint_single(substream->runtime,
++					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
++					     TDM_FRAME_SIZE);
++	}
++
++	snd_pcm_hw_constraint_integer(substream->runtime,
++				      SNDRV_PCM_HW_PARAM_PERIODS);
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Close a playback/TDM playback or record/TDM record stream
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_close(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *adsp_card =
++		snd_adsp_get_drvdata_from_substream(substream);
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	int err = 0;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		/* destroy Renderer/Capture or Equalizer (if used) */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			if (snd_adsp_playback_deinit(
++					adsp_card->playback[dai_idx]) < 0)
++				err = -EINVAL;
++
++			adsp_card->playback[dai_idx] = NULL;
++		} else {
++			if (snd_adsp_record_deinit(
++					adsp_card->record[dai_idx]) < 0)
++				err = -EINVAL;
++
++			adsp_card->record[dai_idx] = NULL;
++		}
++	} else {
++		/* destroy TDM Renderer/TDM Capture */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			if (snd_adsp_tdm_playback_deinit(
++					adsp_card->tdm_playback) < 0)
++				err = -EINVAL;
++
++			adsp_card->tdm_playback = NULL;
++		} else {
++			if (snd_adsp_tdm_record_deinit(
++					adsp_card->tdm_record) < 0)
++				err = -EINVAL;
++
++			adsp_card->tdm_record = NULL;
++		}
++	}
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	Allocate ALSA buffer and calculate expire time of hr timer
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-ENOMEM			Cannot allocate ALSA buffer
++ *****************************************************************************/
++static int snd_adsp_pcm_hw_params(struct snd_pcm_substream *substream,
++				  struct snd_pcm_hw_params *hw_params)
++{
++	struct snd_adsp_base_info *base;
++	int err = 0;
++
++	base = snd_adsp_get_base_from_substream(substream);
++
++	/* set expire time of hrtimer, this value should be time for */
++	/* transfer a frame */
++	base->ktime = ns_to_ktime((1000000000 / params_rate(hw_params)) *
++				  params_period_size(hw_params));
++
++	err = snd_pcm_lib_malloc_pages(substream,
++				       params_buffer_bytes(hw_params));
++
++	/* reset DMA buffer area */
++	memset(substream->runtime->dma_area, 0, substream->runtime->dma_bytes);
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	 Free the allocated ALSA buffer
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Cannot deallocate buffer
++ *****************************************************************************/
++static int snd_adsp_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++/** **************************************************************************
++ *  \brief	 Prepare playback/TDM playback or record/TDM record function
++ *		   before transferring data
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval		 0		Success
++ *  \retval		 -EINVAL	Error
++ *****************************************************************************/
++static int snd_adsp_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *
++		adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	int err = 0;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			/* get playback prepared to execute */
++			err = snd_adsp_playback_prepare(
++				adsp_card->playback[dai_idx], substream);
++		else
++			/* get record prepared to execute */
++			err = snd_adsp_record_prepare(
++				adsp_card->record[dai_idx], substream);
++	} else {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			/* get TDM playback prepared to execute */
++			err = snd_adsp_tdm_playback_prepare(
++				adsp_card->tdm_playback, substream);
++		else
++			/* get TDM record prepared to execute */
++			err = snd_adsp_tdm_record_prepare(
++				adsp_card->tdm_record, substream);
++	}
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	 Trigger playback/TDM playback or record/TDM record stream
++ *		   to go to next phase
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_trigger(struct snd_pcm_substream *substream, int idx)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++
++	switch (idx) {
++	case SNDRV_PCM_TRIGGER_START:
++	case SNDRV_PCM_TRIGGER_RESUME:
++		/* start high-resolution timer */
++		hrtimer_start(&base->hrtimer, base->ktime, HRTIMER_MODE_REL);
++
++		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
++			int buf_queue = 0;
++
++			/* get current available buffer */
++			spin_lock_irqsave(&base->lock, base->flag);
++			buf_queue = base->buf_queue;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++
++			/* send all available buffer to plugin to */
++			/* get data */
++			for (; buf_queue > 0; buf_queue--) {
++				if (xf_adsp_fill_this_buffer(
++						base->handle_id,
++						base->buffer[base->buf_idx],
++						base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++
++				base->buf_idx++;
++
++				if (base->buf_idx >= XF_BUF_POOL_SIZE)
++					base->buf_idx = 0;
++			}
++		}
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++	case SNDRV_PCM_TRIGGER_SUSPEND:
++		break;
++	default:
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Return HW data position
++ *
++ *  \param[in]	  substream		Pointer to substream object
++ *  \retval	  position		HW data position
++ *****************************************************************************/
++static snd_pcm_uframes_t
++snd_adsp_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++	unsigned int hw_idx, hw_buffer_size;
++	snd_pcm_uframes_t pointer;
++
++	/* convert hw index to correct as submitted bytes */
++	spin_lock_irqsave(&base->lock, base->flag);
++	hw_idx = (base->hw_idx / base->buf_bytes) * base->period_bytes;
++	spin_unlock_irqrestore(&base->lock, base->flag);
++
++	hw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	if (hw_idx >= hw_buffer_size) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->hw_idx -= (hw_buffer_size / base->period_bytes) *
++							base->buf_bytes;
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		pointer = snd_pcm_indirect_playback_pointer(substream,
++							    &base->pcm_indirect,
++							    hw_idx);
++	else
++		pointer = snd_pcm_indirect_capture_pointer(substream,
++							   &base->pcm_indirect,
++							   hw_idx);
++
++	return pointer;
++}
++
++/** **************************************************************************
++ *  \brief	  Call read/write process to transfer data
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_ack(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++
++	if (base->runtime_err)
++		return -EINVAL;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		snd_pcm_indirect_playback_transfer(substream,
++						   &base->pcm_indirect,
++						   snd_adsp_pcm_transfer);
++	else
++		snd_pcm_indirect_capture_transfer(substream,
++						  &base->pcm_indirect,
++						  snd_adsp_pcm_transfer);
++
++	return 0;
++}
++
++/** ***************************************************************************
++ *  \brief	  Copy data from source buffer to destination buffer
++ *
++ *  \params[in]	 dst		Destination buffer pointer
++ *  \params[out] src		Source buffer pointer
++ *  \params[in]	 dst_size	Destination buffer size in byte
++ *  \params[in]	 src_size	Source buffer size in byte
++ *  \retval	 None
++ *****************************************************************************/
++static inline void
++snd_adsp_copy_data(void *dst, void *src, int dst_size, int src_size)
++{
++	unsigned char *data_dst = dst;
++	unsigned char *data_src = src;
++	int i;
++
++	if (dst_size == src_size) {
++		/* src and dst bufs are same size, does not need to convert */
++		memcpy(data_dst, data_src, dst_size);
++
++	} else if (dst_size < src_size) {
++		for (i = 0; i < (dst_size - BYTES_PER_SAMPLE(S24_3LE));
++				i += BYTES_PER_SAMPLE(S24_3LE)) {
++			*(u32 *)data_dst = *(u32 *)data_src;
++
++			data_dst += BYTES_PER_SAMPLE(S24_3LE);
++			data_src += BYTES_PER_SAMPLE(S24_LE);
++		}
++
++		/* copy a S24_3LE sample from S24_LE sample */
++		data_dst[0] = data_src[0];
++		data_dst[1] = data_src[1];
++		data_dst[2] = data_src[2];
++
++	} else {
++		unsigned int tmp;
++
++		for (i = 0; i < (dst_size - BYTES_PER_SAMPLE(S24_LE));
++				i += BYTES_PER_SAMPLE(S24_LE)) {
++			tmp = *(u32 *)data_src;
++			*(u32 *)data_dst = tmp & 0x0FFFFFF;
++
++			data_dst += BYTES_PER_SAMPLE(S24_LE);
++			data_src += BYTES_PER_SAMPLE(S24_3LE);
++		}
++
++		/* copy a S24_LE sample from S24_3LE sample */
++		data_dst[0] = data_src[0];
++		data_dst[1] = data_src[1];
++		data_dst[2] = data_src[2];
++		data_dst[3] = 0;
++	}
++}
++
++/** **************************************************************************
++ *  \brief	  Transfer data process between ALSA buffer and ADSP buffer
++ *
++ *  \param[in]	  substream		Pointer to substream object
++ *  \param[in]	  rec			Pointer to indirect PCM data
++ *  \param[in]	  bytes			Number of byte need to be transferred
++ *  \retval	  None
++ *****************************************************************************/
++static void snd_adsp_pcm_transfer(struct snd_pcm_substream *substream,
++				  struct snd_pcm_indirect *rec,
++				  size_t bytes)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++	int direct = substream->stream;
++	int trans_bytes = bytes;
++	int buf_bytes, period_bytes;
++	void *dma_buf, *data_buff;
++
++	/* get the DMA buffer pointer */
++	dma_buf = (void *)(substream->runtime->dma_area + rec->sw_data);
++
++	/* get information from base */
++	buf_bytes = base->buf_bytes;
++	period_bytes = base->period_bytes;
++
++	/* make sure the available buffer and transfer size - TBD */
++	while (trans_bytes > 0) {
++		spin_lock_irqsave(&base->lock, base->flag);
++		if (base->buf_queue > 0 && trans_bytes >= period_bytes) {
++			base->buf_queue--;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++
++			/* get the buffer pointer from stream */
++			data_buff = base->buffer[base->buf_idx];
++
++			if (direct == SNDRV_PCM_STREAM_PLAYBACK) {
++				/* copy data from user *//* PRQA S 3200 2 */
++				snd_adsp_copy_data(data_buff, dma_buf,
++						   buf_bytes, period_bytes);
++
++				/* send buffer to plugin */
++				if (xf_adsp_empty_this_buffer(base->handle_id,
++							      data_buff,
++							      buf_bytes) < 0)
++					base->runtime_err = TRUE;
++			} else {
++				/* copy data to user *//* PRQA S 3200 2 */
++				snd_adsp_copy_data(dma_buf, data_buff,
++						   period_bytes, buf_bytes);
++
++				/* send buffer to plugin */
++				if (xf_adsp_fill_this_buffer(base->handle_id,
++							     data_buff,
++							     buf_bytes) < 0)
++					base->runtime_err = TRUE;
++			}
++
++			base->buf_idx++;
++			if (base->buf_idx >= XF_BUF_POOL_SIZE)
++				base->buf_idx = 0;
++		} else {
++			spin_unlock_irqrestore(&base->lock, base->flag);
++			break;
++		}
++
++		trans_bytes -= period_bytes;
++	}
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Volume control
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  uinfo		Pointer to info structure of volume control
++ *  \retval		 0	Success
++ *****************************************************************************/
++static int snd_adsp_control_volume_info(struct snd_kcontrol *kcontrol,
++					struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 799;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get volume value
++ *
++ *  \param[in]	kcontrol		Pointer to control instance
++ *  \param[in]	ucontrol		Pointer to volume value
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_control_volume_get(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	int handle_state, handle_id;
++	int volume, cmd_idx, direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine command index, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* get the volume's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get the volume's value from the plugin */
++		if (xf_adsp_get_param(handle_id, cmd_idx, &volume) != 0)
++			return -EINVAL;
++
++		/* check the value after getting it and adjust it */
++		ucontrol->value.integer.value[0] = (volume == 0xFFFFFFFF) ?
++					(-1) : (volume * VOLUME_SCALE) >> 20;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			ucontrol->value.integer.value[0] =
++					(ctr_if->vol_rate[direction][index] *
++					 VOLUME_SCALE) >> 20;
++		else
++			ucontrol->value.integer.value[0] =
++					(ctr_if->tdm_vol_rate[direction] *
++					 VOLUME_SCALE) >> 20;
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set volume value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to volume value
++ *  \retval	  1		Volume change
++ *  \retval	  0		Volume does not change
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1*/
++static int
++snd_adsp_control_volume_put(struct snd_kcontrol *kcontrol,
++			    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	int volume;
++	int ret;
++	int handle_state, handle_id, cmd_idx, volume_get;
++	int direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state and handle ID */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* get the value to set */
++	if (ucontrol->value.integer.value[0] == -1) {
++		volume = 0xFFFFFFFF;
++	} else {
++		/* round up the value if needed */
++		volume = (ucontrol->value.integer.value[0] * (1 << 20)) /
++			  VOLUME_SCALE;
++
++		if ((ucontrol->value.integer.value[0] * (1 << 20)) >
++		    (VOLUME_SCALE * volume))
++			volume += 1;
++	}
++
++	/* determine command index, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* set volume to plugin */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* TDM does not support set volume in runtime state */
++		if (kcontrol->id.name[0] == PREFIX_OF_TDM_CTR_NAME)
++			return -EINVAL;
++
++		/* apply set volume value to ADSP from user setting */
++		if (xf_adsp_set_param(handle_id, cmd_idx, volume) != 0)
++			return -EINVAL;
++
++		/* get volume from ADSP after setting to confirm */
++		if (xf_adsp_get_param(handle_id, cmd_idx, &volume_get) != 0)
++			return -EINVAL;
++
++		/* check if the value has changed */
++		ret = (volume_get == volume) ? 1 : 0;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			ctr_if->vol_rate[direction][index] = volume;
++		else
++			ctr_if->tdm_vol_rate[direction] = volume;
++
++		ret = 1;
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Sample Rate Converter control
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	uinfo		Pointer to info structure of sample rate
++ *				converter control
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_control_sample_rate_info(struct snd_kcontrol *kcontrol,
++					     struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 48000;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get sample rate value
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	ucontrol	Pointer to sample rate value
++ *  \retval	0		Success
++ *  \retval	-EINVAL		Error
++ *****************************************************************************/
++static int snd_adsp_control_sample_rate_get(struct snd_kcontrol *kcontrol,
++					    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int *rate;
++	int handle_id, handle_state, cmd_idx, direction;
++	unsigned int index;
++
++	rate = (int *)&ucontrol->value.integer.value[0]; /* PRQA S 310 */
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state and handle ID */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine command, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* get parameter from plugin */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		if (xf_adsp_get_param(handle_id, cmd_idx, rate) != 0)
++			return -EINVAL;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			*rate = adsp_card->ctr_if.sample_rate[direction][index];
++		else
++			*rate = adsp_card->ctr_if.tdm_sample_rate[direction];
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set sample rate value
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	ucontrol	Pointer to sample rate value
++ *  \retval	1		Sample rate change
++ *  \retval	0		Sample rate does not change
++ *  \retval	-EINVAL		Error
++ *****************************************************************************/
++/* PRQA S 3673 1 */
++static int
++snd_adsp_control_sample_rate_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	unsigned int index;
++	int rate;
++	int handle_state, cmd_idx, direction;
++	int ret = 1;
++
++	rate = (int)ucontrol->value.integer.value[0];
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine command, direction and handle state */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->cap_state;
++
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback)
++				handle_state = adsp_card->tdm_playback->state;
++
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record)
++				handle_state = adsp_card->tdm_record->state;
++		}
++	}
++
++	/* get the value to set */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		return -EINVAL;
++
++	if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++		adsp_card->ctr_if.sample_rate[direction][index] = rate;
++	else
++		adsp_card->ctr_if.tdm_sample_rate[direction] = rate;
++
++	ret = 1;
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Equalizer control
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	uinfo		Pointer to info structure of Equalizer control
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_control_eqz_info(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = MAX_EQZ_PARAM_NUMBER;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 0x7fffffff;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get equalizer parameters value
++ *
++ *  \param[in]	  kcontrol		Pointer to control instance
++ *  \param[in]	  ucontrol		Pointer to equalizer parameters value
++ *  \retval	  0			Success
++ *  \retval	  -EINVAL		Error
++ *****************************************************************************/
++static int snd_adsp_control_eqz_get(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int handle_state, direction;
++	int i, j, filter_index;
++	unsigned int index;
++	struct xf_adsp_equalizer *equalizer;
++	struct xf_adsp_equalizer_params *eqz_params;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determin direction of stream */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state, handle ID, equalizer pointer */
++	handle_state = XF_HANDLE_NULL;
++	equalizer = NULL;
++
++	/* get component's state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->eqz_state;
++			equalizer = adsp_card->playback[index]->equalizer;
++		}
++	} else {
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->eqz_state;
++			equalizer = adsp_card->record[index]->equalizer;
++		}
++	}
++
++	/* perform parameters' values getting */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get equalizer's parameters */
++		if (xf_adsp_equalizer_get_params(equalizer) != 0)
++			return -EINVAL;
++
++		eqz_params = &equalizer->params;
++	} else {
++		eqz_params = &adsp_card->ctr_if.eqz_params[direction][index];
++	}
++
++	/* get equalizer type: PARAMETRIC or GRAPHIC */
++	ucontrol->value.integer.value[0] = eqz_params->eqz_type;
++
++	/* get parameters' value from Equalizer plugin */
++	if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		for (i = 0, filter_index = 1;
++		     filter_index <= XA_REL_EQZ_FILTER_NUM;
++		     i++, filter_index++) {
++			/* get filter index */
++			ucontrol->value.integer.value[(i * 6) + 1] =
++				filter_index;
++
++			/* get frequency centre */
++			ucontrol->value.integer.value[(i * 6) + 2] =
++				eqz_params->p_coef.fc[i];
++
++			/* get bandwidth */
++			ucontrol->value.integer.value[(i * 6) + 3] =
++				eqz_params->p_coef.band_width[i];
++
++			/* get filter type */
++			ucontrol->value.integer.value[(i * 6) + 4] =
++				eqz_params->p_coef.type[i];
++
++			/* get gain base */
++			ucontrol->value.integer.value[(i * 6) + 5] =
++				eqz_params->p_coef.gain_base[i];
++
++			/* get gain */
++			ucontrol->value.integer.value[(i * 6) + 6] =
++				eqz_params->p_coef.gain[i];
++		}
++	} else {
++		for (i = 0, filter_index = 1;
++		     filter_index <= XA_REL_EQZ_GRAPHIC_BAND_NUM;
++		     i++, filter_index++) {
++			/* get band index */
++			ucontrol->value.integer.value[(i * 2) + 1] =
++				filter_index;
++
++			/* get graphic gain */
++			ucontrol->value.integer.value[(i * 2) + 2] =
++				eqz_params->g_coef.gain_g[i];
++		}
++
++		j = (i * 2) + 1;
++
++		/* make the rest of values silent */
++		while (j < MAX_EQZ_PARAM_NUMBER) {
++			ucontrol->value.integer.value[j] = -1;
++			j++;
++		}
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set equalizer parameters value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer parameters value
++ *  \retval	  1		Equalizer parameters change
++ *  \retval	  0		Equalizer parameters does not change
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1*/
++static int snd_adsp_control_eqz_put(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int handle_state, direction, filter_idx;
++	int i;
++	int index;
++	struct xf_adsp_equalizer_params *eqz_params = NULL;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* get the handle state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->eqz_state;
++	} else {
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->eqz_state;
++	}
++
++	/* perform equalizer's parameters setting */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		return -EINVAL;
++
++	/* PRQA S 310 1*/
++	eqz_params = &adsp_card->ctr_if.eqz_params[direction][index];
++
++	i = 0;
++	/* PRQA S 3440 1*/
++	eqz_params->eqz_type = ucontrol->value.integer.value[i];
++	i++;
++	filter_idx = 0;
++
++	if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		while (i < MAX_EQZ_PARAM_NUMBER) {
++			/* get index filter */
++			/* PRQA S 3440*/
++			filter_idx = ucontrol->value.integer.value[i];
++			i++;
++
++			/* valid index filter is range */
++			/* (1 to XA_REL_EQZ_FILTER_NUM) */
++			if (filter_idx >= 1 &&
++			    filter_idx <= XA_REL_EQZ_FILTER_NUM) {
++					/* PRQA S 3440 5*/
++				eqz_params->p_coef.fc[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.band_width[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.type[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.gain_base[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.gain[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++			}
++			/* index filter = -1 means that user */
++			/* does not set this filter */
++			else if (filter_idx == -1 || filter_idx == 0) {
++				i += 5;
++			} else {
++				return -EINVAL;
++			}
++		}
++	} else if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_GRAPHIC) {
++		while (i < ((XA_REL_EQZ_GRAPHIC_BAND_NUM * 2) + 1)) {
++			/*get index filter */
++			/* PRQA S 3440 */
++			filter_idx = ucontrol->value.integer.value[i++];
++
++			if (filter_idx >= 1 &&
++			    filter_idx <= XA_REL_EQZ_GRAPHIC_BAND_NUM) {
++				eqz_params->g_coef.gain_g[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++				i++;
++
++			} else if (filter_idx == -1 || filter_idx == 0) {
++				i += 1;
++			} else {
++				return -EINVAL;
++			}
++		}
++	} else {
++		return -EINVAL;
++	}
++
++	return 1;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Equalizer Switch control
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  uinfo		Pointer to info structure of Equalizer
++ *				Switch control
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int snd_adsp_control_eqz_switch_info(struct snd_kcontrol *kcontrol,
++					    struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get equalizer switch value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer switch value
++ *  \retval	  0		Success
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_eqz_switch_get(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* get the Equalizer switch status */
++	ucontrol->value.integer.value[0] =
++		adsp_card->ctr_if.eqz_switch[direction][index];
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set equalizer switch value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer switch value
++ *  \retval	  1		Equalizer switch change
++ *  \retval	  0		Equalizer switch does not change
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1 */
++static int
++snd_adsp_control_eqz_switch_put(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int eqz_switch;
++	int handle_state, direction;
++	unsigned int index;
++	int ret = 0;
++
++	eqz_switch = ucontrol->value.integer.value[0];
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++		     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine handle state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->rdr_state;
++	} else {
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->cap_state;
++	}
++
++	/* set the status of Equalizer */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* runtime setting is not supported */
++		ret = -EINVAL;
++	} else {
++		adsp_card->ctr_if.eqz_switch[direction][index] = eqz_switch;
++		ret = 1;
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Renderer output channel
++ *
++ *  \param[in]	  kcontrol Pointer to control instance
++ *  \param[in]	  uinfo	   Pointer to info structure of Renderer output channel
++ *  \retval	  0	   Success
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_info(struct snd_kcontrol *kcontrol,
++				      struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = MONAURAL;
++	uinfo->value.integer.max = STEREO;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get Renderer output channel's value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to Renderer output channel value
++ *  \retval	  0		Success
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_get(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int rdr_out_ch;
++	unsigned int index;
++	int handle_state, handle_id;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine handle state and handle ID */
++	if (adsp_card->playback[index]) {
++		handle_state = adsp_card->playback[index]->rdr_state;
++		handle_id = adsp_card->playback[index]->renderer->handle_id;
++	}
++
++	/* get Renderer output channel's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get Renderer output channel's value from Renderer plugin */
++		if (xf_adsp_get_param(handle_id,
++				      XA_RDR_CONFIG_PARAM_OUT_CHANNELS,
++				      &rdr_out_ch) != 0) {
++			return -EINVAL;
++		}
++
++		ucontrol->value.integer.value[0] = rdr_out_ch;
++	} else {
++		ucontrol->value.integer.value[0] =
++		adsp_card->ctr_if.rdr_out_ch[index];
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set Renderer output channel's value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to Renderer output channel value
++ *  \retval	  1		Success
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_put(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	unsigned int index;
++	int handle_state;
++	int ret = 1;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine handle state and handle ID */
++	if (adsp_card->playback[index])
++		handle_state = adsp_card->playback[index]->rdr_state;
++
++	/* get Renderer output channel's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		/* not support runtime setting */
++		ret = -EINVAL;
++	else
++		adsp_card->ctr_if.rdr_out_ch[index] =
++			ucontrol->value.integer.value[0];
++
++	return ret;
++}
++
++/** control interface for playback's volume rate */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_playback_volume_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	}
++};
++
++/** control interface for Capture's volume rate */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_capture_volume_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	}
++};
++
++/** control interface for playback's output sample rate */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_playback_sample_rate_out_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	}
++};
++
++/** control interface for Capture's input sample rate */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_capture_sample_rate_in_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	}
++};
++
++/** control interface for Equalizer parameters in playback */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_playback_equalizer_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	}
++};
++
++/** control interface for Equalizer parameters in record */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_capture_equalizer_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	}
++};
++
++/** control interface for Equalizer usage in playback */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_playback_equalizer_switch_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	}
++};
++
++/** control interface for Equalizer usage in record */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_capture_equalizer_switch_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	}
++};
++
++/** control interface for playback's output channel */
++static struct snd_kcontrol_new
++snd_adsp_playback_out_channel_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	}
++};
++
++/** control interface for TDM playback's volume rate */
++static struct snd_kcontrol_new snd_adsp_tdm_playback_volume_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_PLAYBACK_VOLUME_CTR_NAME,
++	.info = &snd_adsp_control_volume_info,
++	.get = &snd_adsp_control_volume_get,
++	.put = &snd_adsp_control_volume_put
++};
++
++/** control interface for TDM capture's volume rate */
++static struct snd_kcontrol_new snd_adsp_tdm_capture_volume_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_CAPTURE_VOLUME_CTR_NAME,
++	.info = &snd_adsp_control_volume_info,
++	.get = &snd_adsp_control_volume_get,
++	.put = &snd_adsp_control_volume_put
++};
++
++/** control interface for TDM playback's output sample rate */
++static struct snd_kcontrol_new snd_adsp_tdm_playback_sample_rate_out_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_PLAYBACK_OUT_RATE_CTR_NAME,
++	.info = &snd_adsp_control_sample_rate_info,
++	.get = &snd_adsp_control_sample_rate_get,
++	.put = &snd_adsp_control_sample_rate_put
++};
++
++/** control interface for TDM capture's input sample rate */
++static struct snd_kcontrol_new snd_adsp_tdm_capture_sample_rate_in_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_CAPTURE_IN_RATE_CTR_NAME,
++	.info = &snd_adsp_control_sample_rate_info,
++	.get = &snd_adsp_control_sample_rate_get,
++	.put = &snd_adsp_control_sample_rate_put
++};
++
++/** PCM callback function of the sound card */
++static struct snd_pcm_ops snd_adsp_pcm_ops = {
++	.open = &snd_adsp_pcm_open,	/* PRQA S 1053 10 */
++	.close = &snd_adsp_pcm_close,
++	.ioctl = &snd_pcm_lib_ioctl,
++	.hw_params = &snd_adsp_pcm_hw_params,
++	.hw_free = &snd_adsp_pcm_hw_free,
++	.prepare = &snd_adsp_pcm_prepare,
++	.trigger = &snd_adsp_pcm_trigger,
++	.pointer = &snd_adsp_pcm_pointer,
++	.ack = &snd_adsp_pcm_ack
++};
++
++/*******************************************************************
++ * Internal functions
++ * ****************************************************************/
++
++/** **************************************************************************
++ *  \brief	 Process information get from control structure
++ *
++ *  \param[in]	  eqz_params	 Equalizer parameters object
++ *  \param[in]	  eqz_ctr_params Equalizer parameters stored in control object
++ *  \param[in]	  flag		 Indicate playback or capture stream
++ *****************************************************************************/
++static void snd_adsp_get_eqz_params_from_control(
++		struct xf_adsp_equalizer_params *eqz_params,
++		struct xf_adsp_equalizer_params *eqz_ctr_params, bool flag)
++{
++	int filter_idx;
++
++	if (flag) {
++		if (eqz_ctr_params->eqz_type >= 0)
++			eqz_params->eqz_type = eqz_ctr_params->eqz_type;
++
++		for (filter_idx = 0; filter_idx < XA_REL_EQZ_FILTER_NUM;
++		     filter_idx++) {
++			if (eqz_ctr_params->p_coef.fc[filter_idx] >= 0)
++				eqz_params->p_coef.fc[filter_idx] =
++				  eqz_ctr_params->p_coef.fc[filter_idx];
++
++			if (eqz_ctr_params->p_coef.band_width[filter_idx] >= 0)
++				eqz_params->p_coef.band_width[filter_idx] =
++				eqz_ctr_params->p_coef.band_width[filter_idx];
++
++			if (eqz_ctr_params->p_coef.type[filter_idx] >= 0)
++				eqz_params->p_coef.type[filter_idx] =
++				  eqz_ctr_params->p_coef.type[filter_idx];
++
++			if (eqz_ctr_params->p_coef.gain_base[filter_idx] >= 0)
++				eqz_params->p_coef.gain_base[filter_idx] =
++				  eqz_ctr_params->p_coef.gain_base[filter_idx];
++
++			if (eqz_ctr_params->p_coef.gain[filter_idx] >= 0)
++				eqz_params->p_coef.gain[filter_idx] =
++				  eqz_ctr_params->p_coef.gain[filter_idx];
++		}
++		for (filter_idx = 0; filter_idx < XA_REL_EQZ_GRAPHIC_BAND_NUM;
++		     filter_idx++) {
++			if (eqz_ctr_params->g_coef.gain_g[filter_idx] >= 0)
++				eqz_params->g_coef.gain_g[filter_idx] =
++				  eqz_ctr_params->g_coef.gain_g[filter_idx];
++		}
++	} else {
++		memcpy(eqz_ctr_params, eqz_params, sizeof(*eqz_params));
++	}
++}
++
++/*******************************************************************
++ * ALSA ADSP Platform driver interface
++ * ****************************************************************/
++
++/** ****************************************************************************
++ *  \brief	 Register control interface and preallocate ALSA buffer
++ *
++ *  \param[in]	  runtime	Pointer to runtime PCM data
++ *  \retval	  0		Success
++ *  \retval	 -EINVAL	Cannot register control interface
++ ******************************************************************************/
++static int snd_adsp_pcm_new(struct snd_soc_pcm_runtime *runtime)
++{
++	int i = 0, err = 0;
++	int id;
++	struct snd_card *card;
++	struct snd_adsp_card *adsp_card;
++	int alsa_buf_sz = 0;
++
++	/* get sound card data */
++	card = runtime->card->snd_card;
++
++	/* get driver data */
++	adsp_card = snd_soc_dai_get_drvdata(runtime->cpu_dai);
++
++	/* get the ID of CPU DAI */
++	id = runtime->cpu_dai->id;
++
++	/* register control interfaces */
++	if (id == RDR_DAI_IDX0 || id == RDR_DAI_IDX1 ||
++	    id == RDR_DAI_IDX2 || id == RDR_DAI_IDX3) {
++		struct snd_kcontrol *kctl[RDR_CONTROL_NUM];
++		void *rdr_ctr[RDR_CONTROL_NUM] = {
++			&snd_adsp_playback_volume_control[id], /* PRQA S 1031 */
++			&snd_adsp_capture_volume_control[id],
++			&snd_adsp_playback_sample_rate_out_control[id],
++			&snd_adsp_capture_sample_rate_in_control[id],
++			&snd_adsp_playback_equalizer_control[id],
++			&snd_adsp_capture_equalizer_control[id],
++			&snd_adsp_playback_equalizer_switch_control[id],
++			&snd_adsp_capture_equalizer_switch_control[id],
++			&snd_adsp_playback_out_channel_control[id]
++		};
++
++		/* add basic control instance */
++		for (i = 0; i < RDR_CONTROL_NUM; i++) {
++			kctl[i] = snd_ctl_new1(rdr_ctr[i], adsp_card);
++			err = snd_ctl_add(card, kctl[i]);
++			if (err < 0)
++				return -EINVAL;
++		}
++
++		/* assign ALSA buffer size */
++		alsa_buf_sz = MAX_BUFFER_BYTES;
++
++		/* enable MIX feature from the 2nd playback/record stream */
++		if (adsp_card->ctr_if.mix_usage == MIX_UNUSED)
++			adsp_card->ctr_if.mix_usage = FIRST_RUN;
++		else if (adsp_card->ctr_if.mix_usage == FIRST_RUN)
++			adsp_card->ctr_if.mix_usage = SECOND_RUN;
++
++	} else {
++		struct snd_kcontrol *kctl[TDM_CONTROL_NUM];
++		void *tdm_ctr[TDM_CONTROL_NUM] = {
++			&snd_adsp_tdm_playback_volume_control,
++			&snd_adsp_tdm_playback_sample_rate_out_control,
++			&snd_adsp_tdm_capture_volume_control,
++			&snd_adsp_tdm_capture_sample_rate_in_control
++		};
++
++		/* add basic control instances */
++		for (i = 0; i < TDM_CONTROL_NUM; i++) {
++			kctl[i] = snd_ctl_new1(tdm_ctr[i], adsp_card);
++			err = snd_ctl_add(card, kctl[i]);
++			if (err < 0)
++				return -EINVAL;
++		}
++
++		/* assign ALSA buffer size */
++		alsa_buf_sz = TDM_MAX_BUFFER_BYTES;
++	}
++
++	return snd_pcm_lib_preallocate_pages_for_all(runtime->pcm,
++			SNDRV_DMA_TYPE_CONTINUOUS,
++			snd_dma_continuous_data(GFP_KERNEL),
++			alsa_buf_sz, alsa_buf_sz);
++}
++
++/* ****************************************************************************
++ * ALSA ADSP DAI register
++ * ***************************************************************************/
++
++/** callback function of platform driver */
++static struct snd_soc_platform_driver snd_adsp_platform = {
++	.pcm_new	= &snd_adsp_pcm_new, /* PRQA S 1053 *//* PRQA S 0674 */
++	.ops		= &snd_adsp_pcm_ops,
++};
++
++/** component information of driver */
++static const struct snd_soc_component_driver snd_adsp_component = {
++	.name		= "snd_adsp",		   /* PRQA S 1053 */
++};
++
++/** DAI information of ADSP ALSA driver */
++static struct snd_soc_dai_driver snd_adsp_dai[MAX_DAI_IDX] = {
++	{
++		/* PRQA S 1053 */
++		.id			= RDR_DAI_IDX0,
++		.name			= "adsp-dai.0",
++		.playback.stream_name   = "Playback0",
++		.capture.stream_name	= "Capture0",
++	},
++	{
++		.id			= RDR_DAI_IDX1,
++		.name			= "adsp-dai.1",
++		.playback.stream_name   = "Playback1",
++		.capture.stream_name	= "Capture1",
++	},
++	{
++		.id			= RDR_DAI_IDX2,
++		.name			= "adsp-dai.2",
++		.playback.stream_name   = "Playback2",
++		.capture.stream_name	= "Capture2",
++	},
++	{
++		.id			= RDR_DAI_IDX3,
++		.name			= "adsp-dai.3",
++		.playback.stream_name   = "Playback3",
++		.capture.stream_name	= "Capture3",
++	},
++	{
++		.id			= TDM_DAI_IDX,
++		.name			= "adsp-tdm-dai",
++		.playback.stream_name   = "TDM Playback",
++		.capture.stream_name	= "TDM Capture",
++	}
++};
++
++/** ***************************************************************************
++ *  \brief	 Register platform driver and ADSP ALSA sound card
++ *
++ *  \param[in]	  pdev		Pointer to platform driver data
++ *  \retval	  0		Success
++ *  \retval	 -ENOMEM	Cannot allocate driver's data
++ *  \retval	 -EINVAL	Cannot register platform driver or sound card
++ ****************************************************************************/
++static int snd_adsp_probe(struct platform_device *pdev)
++{
++	struct snd_adsp_card *adsp_card;
++	int i;
++
++	/* allocate a card data structure */
++	adsp_card = kmalloc(sizeof(*adsp_card), GFP_KERNEL);
++	if (!adsp_card)
++		return -ENOMEM;
++
++	/* init parameters */
++	memset(adsp_card, 0, sizeof(*adsp_card)); /* PRQA S 3200 */
++
++	/* PRQA S 3200 1*/
++	memset(&adsp_card->ctr_if, -1, sizeof(struct snd_adsp_control));
++
++	/* disable Equalizer for all streams */
++	for (i = 0; i < (MAX_DAI_IDX - 1); i++) {
++		adsp_card->ctr_if.eqz_switch[DIRECT_CAPTURE][i] = 0;
++		adsp_card->ctr_if.eqz_switch[DIRECT_PLAYBACK][i] = 0;
++	}
++
++	/* disable MIX function for all */
++	adsp_card->ctr_if.mix_usage = MIX_UNUSED;
++
++	/* save driver data */
++	dev_set_drvdata(&pdev->dev, adsp_card);
++
++	/* register platform device */
++	if (snd_soc_register_platform(&pdev->dev, &snd_adsp_platform) < 0) {
++		snd_soc_unregister_platform(&pdev->dev);
++		return -EINVAL;
++	}
++
++	/* fill format information of sound DAI driver for Rdr/Cap function */
++	for (i = 0; i < (MAX_DAI_IDX - 1); i++) {
++		snd_adsp_dai[i].playback.rates = SND_ADSP_SAMPLE_RATES;
++		snd_adsp_dai[i].playback.formats = SND_ADSP_PCM_WIDTHS;
++		snd_adsp_dai[i].playback.channels_min = MIN_CHANNEL;
++		snd_adsp_dai[i].playback.channels_max = MAX_CHANNEL;
++
++		snd_adsp_dai[i].capture.rates = SND_ADSP_SAMPLE_RATES;
++		snd_adsp_dai[i].capture.formats = SND_ADSP_PCM_WIDTHS;
++		snd_adsp_dai[i].capture.channels_min = MIN_CHANNEL;
++		snd_adsp_dai[i].capture.channels_max = MAX_CHANNEL;
++	}
++
++	/* fill format information of sound DAI driver for TDM function */
++	snd_adsp_dai[i].playback.rates = SND_ADSP_SAMPLE_RATES;
++	snd_adsp_dai[i].playback.formats = SND_ADSP_PCM_WIDTHS;
++	snd_adsp_dai[i].playback.channels_min = TDM_MIN_CHANNEL;
++	snd_adsp_dai[i].playback.channels_max = TDM_MAX_CHANNEL;
++
++	snd_adsp_dai[i].capture.rates = SND_ADSP_SAMPLE_RATES;
++	snd_adsp_dai[i].capture.formats = SND_ADSP_PCM_WIDTHS;
++	snd_adsp_dai[i].capture.channels_min = TDM_MIN_CHANNEL;
++	snd_adsp_dai[i].capture.channels_max = TDM_MAX_CHANNEL;
++
++	/* register CPU dai */
++	if (snd_soc_register_component(&pdev->dev, &snd_adsp_component,
++				       snd_adsp_dai,
++				       ARRAY_SIZE(snd_adsp_dai)) < 0) {
++		snd_soc_unregister_platform(&pdev->dev);
++		return -EINVAL;
++	}
++
++	dev_info(&pdev->dev, "probed\n");
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Unregister platform driver and ADSP ALSA sound card
++ *
++ *  \param[in]	pdev		Pointer platform driver data
++ *  \retval	0		Success
++ *  \retval	-EINVAL		Invalid driver's data
++ *****************************************************************************/
++static int snd_adsp_remove(struct platform_device *pdev)
++{
++	/* get ADSP sound card data */
++	struct snd_adsp_card *adsp_card = dev_get_drvdata(&pdev->dev);
++
++	if (!adsp_card)
++		return -ENODEV;
++
++	/* release the ADSP sound card */
++	kfree(adsp_card);
++
++	/* unregister platform driver */
++	snd_soc_unregister_component(&pdev->dev);
++	snd_soc_unregister_platform(&pdev->dev);
++
++	/* success */
++	return 0;
++}
++
++/** ADSP ALSA driver information */
++static const struct of_device_id snd_adsp_id[] = {
++	{ .compatible = "renesas,rcar_adsp_sound_gen3", },  /* PRQA S 1053 */
++};
++MODULE_DEVICE_TABLE(of, snd_adsp_id);
++
++/** platform driver of ADSP ALSA sound card */
++static struct platform_driver snd_adsp_driver = {
++	.driver	= {		 /* PRQA S 1053 */
++		.name	= "rcar_adsp_sound",
++		.of_match_table = snd_adsp_id,
++	},
++	.probe		= snd_adsp_probe,
++	.remove		= snd_adsp_remove,
++};
++module_platform_driver(snd_adsp_driver);		/* PRQA S 0651 */
++
++MODULE_AUTHOR("Renesas AudioDSP");
++MODULE_DESCRIPTION("Platform driver for ADSP");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:ADSP-PCM-AUDIO");
+diff --git a/sound/soc/adsp/xf-adsp-base.c b/sound/soc/adsp/xf-adsp-base.c
+new file mode 100644
+index 0000000..3ad9445
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-base.c
+@@ -0,0 +1,2259 @@
++/** ***************************************************************************
++ *\file		xf-adsp-base.c
++ *\brief	Source file for ADSP Base Control layer
++ *\addtogroup	ADSP Driver
++ ******************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ ******************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#include <linux/slab.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++
++#include "xf-adsp-base.h"
++
++#define XF_AUX_POOL_SIZE	(16)	/**< size of auxiliary pool*/
++#define XF_AUX_POOL_MSG_LENGTH	(256)	/**< size of auxiliary buffer   */
++
++#define XF_PROXY_ALIGN		(64)	/**< proxy alignment		*/
++
++/** \def XF_ALIGNED(size)
++ *  Get properly aligned buffer length
++ */
++#define XF_ALIGNED(size)\
++((((size) + XF_PROXY_ALIGN) - 1) & ~(XF_PROXY_ALIGN - 1)) /* PRQA S 3453 */
++
++#ifndef offset_of
++/** \def offset_of(type, member)
++ *  Return the offset of member in type structuer in byte
++ */
++#define offset_of(type, member)  \
++	((int)(long int)&(((const type *)(0))->member))	/* PRQA S 3453 */
++#endif
++
++/*************************************************
++ * Variable and and function declaration
++ * **********************************************/
++
++/** ADSP base control data */
++static struct xf_adsp_base *base;
++
++/* function declaration */
++static int xf_adsp_base_register_handle(void *private_data,
++					struct xf_callback_func *cb,
++					int comp_id);
++static inline struct xf_handle *xf_adsp_base_get_handle(int handle_id);
++static int xf_adsp_base_free_handle(int handle_id);
++static void xf_adsp_base_init_handle(void);
++static int xf_adsp_base_get_valid_handle(void);
++static int xf_send_and_receive(struct xf_message *msg);
++static int xf_response_thread(void *data);
++static void xf_buffer_put(struct xf_buffer *buffer);
++static u32 xf_buffer_length(struct xf_buffer *b);
++static struct xf_buffer *xf_buffer_get(struct xf_pool *pool);
++static void *xf_buffer_data(struct xf_buffer *b);
++static int xf_adsp_unregister(int comp_id);
++static int xf_adsp_register(char *name, int *comp_id);
++
++/*************************************************
++ * Helper function to process pool data
++ * **********************************************/
++
++/** ***********************************************************
++ *  \brief get buffer from given pool
++ *
++ *  \param[in]  pool	Data pool address
++ *  \retval	b	Pointer to buffer address in pool
++ **************************************************************/
++static struct xf_buffer *xf_buffer_get(struct xf_pool *pool)
++{
++	struct xf_buffer *b;
++
++	b = pool->free;
++	if (b) {
++		pool->free = b->link.next;
++		b->link.pool = pool;
++	}
++	return b;
++}
++
++/***********************************************************
++ *\brief return buffer back to pool
++ *
++ *\param[in]  buffer  Pointer to the buffer data
++ ************************************************************/
++static void xf_buffer_put(struct xf_buffer *buffer)
++{
++	struct xf_pool *pool = buffer->link.pool;
++
++	buffer->link.next = pool->free;
++	pool->free = buffer;
++}
++
++/***********************************************************
++ *\brief get the address of the given buffer data
++ *
++ *\param[in]	b		Pointer to the buffer data
++ *\retval	address		Address of buffer data
++ ************************************************************/
++static void *xf_buffer_data(struct xf_buffer *b)
++{
++	return b->address;
++}
++
++/************************************************************
++ *\brief get the length of the given buffer data
++ *
++ *\param[in]	b		Pointer to the buffer data
++ *\retval	length		Size of buffer data
++ ************************************************************/
++static u32 xf_buffer_length(struct xf_buffer *b)  /* PRQA S 3673 */
++{
++	return b->link.pool->length;
++}
++
++/************************************************************
++ *\brief set data to the given command message
++ *
++ *\param[out] m		Pointer to the command message
++ *\param[in]  id	Message ID
++ *\param[in]  opcode	Message opcode
++ *\param[in]  length	Message length
++ *\param[in]  buf	Pointer to the buffer data
++ *\param[in]  next	Pointer to the next message
++ *\retval     m		Pointer to the command message
++ ************************************************************/
++static inline struct xf_message *
++xf_create_msg(struct xf_message *m, u32 id, u32 opcode, u32 length, void *buf,
++	      struct xf_message *next)
++{
++	if (m) {
++		m->id = id;
++		m->opcode = opcode;
++		m->length = length;
++		m->buffer = buf;
++		m->next = next;
++	}
++
++	return m;
++}
++
++/*****************************************************************
++ *\brief synchronous send and wait for response message from proxy
++ *
++ *\param[in]	msg		Pointer to the command message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ ****************************************************************/
++static int xf_send_and_receive(struct xf_message *msg)
++{
++	int err;
++	int opcode = msg->opcode;
++
++	/* reset the base flag */
++	spin_lock(&base->lock);
++	base->base_flag = FALSE;
++	spin_unlock(&base->lock);
++
++	err = base->cmd.send(base->client, (void *)msg);
++	if (err != 0)
++		return err;
++
++	/* sleep and wait for the response wake up event */
++	if (wait_event_interruptible(base->base_wait,
++				     base->base_flag || base->err_flag)) {
++		return -EINVAL;
++	}
++
++	if (base->err_flag != 0) {
++		spin_lock(&base->lock);
++		base->err_flag = FALSE;
++		spin_unlock(&base->lock);
++		return -EINVAL;
++	}
++
++	/* save the response message */
++	/* PRQA S 3200 */
++	memcpy(msg, &base->base_msg, sizeof(struct xf_message));
++
++	/* check if the reponsed message is right */
++	if (msg->opcode != opcode)
++		return -EINVAL;
++
++	return 0;
++}
++
++/*************************************************************
++ *\brief send a message to proxy
++ *
++ *\param[in]	msg		Pointer to the command message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++static inline int xf_send(struct xf_message *msg)
++{
++	return base->cmd.send(base->client, (void *)msg);
++}
++
++/** ***********************************************************
++ *\brief receive message from proxy
++ *
++ *\param[in]	msg		Pointer to store the response message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++static inline int xf_receive(struct xf_message *msg)
++{
++	/* do not wait here */
++	return base->cmd.recv(base->client, (void *)msg);
++}
++
++/** ***********************************************************
++ *\brief thread for receive response data
++ **************************************************************/
++static int xf_response_thread(void *data)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++	int id;
++
++	/* set polling to wait the response message */
++	spin_lock(&base->lock);
++	base->wait_flag = FALSE;
++	spin_unlock(&base->lock);
++
++	while (!kthread_should_stop()) {
++		if (base->cmd.poll(base->client, &base->wait_flag) != 0)
++			continue;
++
++		if (xf_receive(&msg) != 0)
++			continue;
++
++		/* get the handle id */
++		id = XF_AP_CLIENT(msg.id);
++
++		/* check the destination of the response message */
++		if (id == 0) {
++			/* message is from base control */
++			/* PRQA S 3200 1*/
++			memcpy(&base->base_msg, &msg,
++			       sizeof(struct xf_message));
++
++			spin_lock(&base->lock);
++			base->base_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			continue;
++		}
++
++		/* get handle data */
++		handle = xf_adsp_base_get_handle(id);
++
++		if (handle == 0)
++			continue;
++
++		switch (msg.opcode) {
++		case XF_EMPTY_THIS_BUFFER:	/* PRQA S 0594 */
++			handle->cb->empty_buf_done(handle->private_data,
++						   msg.opcode,
++						   msg.length,
++						   msg.buffer);
++			break;
++		case XF_FILL_THIS_BUFFER:	/* PRQA S 0594 */
++			handle->cb->fill_buf_done(handle->private_data,
++						  msg.opcode,
++						  msg.length,
++						  msg.buffer);
++			break;
++		case XF_SET_PARAM:		/* PRQA S 0594 4 */
++		case XF_GET_PARAM:
++		case XF_ROUTE:
++		case XF_UNROUTE:
++			/* message is from base control */
++			memcpy(&base->base_msg, &msg,
++			       sizeof(struct xf_message)); /* PRQA S 3200 */
++
++			spin_lock(&base->lock);
++			base->base_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			break;
++		default:
++			/* error has occurred */
++			handle->cb->event_handler(handle->private_data);
++
++			xf_adsp_base_free_handle(id); /* PRQA S 3200 */
++
++			spin_lock(&base->lock);
++			base->err_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			break;
++		}
++	}
++
++	pr_info("ADSP base thread was exited\n");
++
++	do_exit(0);
++	return 0;
++}
++
++/*************************************************************
++ *	\brief register component to ADSP
++ *
++ *	\param[in]    name      Name string of component
++ *	\param[out]   comp_id   Store the registered component ID
++ *	\retval	      0         Success
++ *	\retval	      -EINVAL   Failed
++ **************************************************************/
++static int xf_adsp_register(char *name, int *comp_id)	/* PRQA S 3673 */
++{
++	struct xf_message msg;
++	struct xf_buffer *b = xf_buffer_get(base->aux_pool);
++	int err = 0;
++
++	msg.id = __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0));
++	msg.opcode = XF_REGISTER;
++	msg.length = strlen(name) + 1;
++	msg.buffer = xf_buffer_data(b);
++
++	/* copy identify name of ADSP component */
++	if (msg.length <= xf_buffer_length(b))
++		strncpy(msg.buffer, name, msg.length);	/* PRQA S 3200 */
++	else
++		strncpy(msg.buffer, name, xf_buffer_length(b));/* PRQA S 3200 */
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the registered component ID */
++	*comp_id = XF_MSG_SRC(msg.id);
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ * \brief unregister component from ADSP
++ * \param[in]	comp_id		Registered component ID
++ * \retval	0		Success
++ * \retval	-EINVAL		Failed
++ **************************************************************/
++static int xf_adsp_unregister(int comp_id)
++{
++	struct xf_message msg;
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), comp_id),
++		      XF_UNREGISTER, 0, NULL, NULL);	/* PRQA S 3200 */
++
++	return xf_send_and_receive(&msg);
++}
++
++/***************************************************************
++ * APIs for ADSP component helper
++ * ************************************************************/
++/** ***********************************************************
++ * \brief allocate memory pool from shared memory
++ * \param[in]   pool_size	Number of buffer need to allocate
++ * \param[in]   buf_length	Size of each buffer in bytes
++ * \retval	pool		Pointer to allocated pool
++ * \retval	-EINVAL		Invalid base data
++ * \retval	-ENOMEM		Out of memory resource
++ **************************************************************/
++struct xf_pool *xf_adsp_allocate_mem_pool(int pool_size, int buf_length)
++{
++	void *data;
++	u32 number;
++	struct xf_buffer *b;
++	struct xf_message msg;
++	struct xf_pool *pool;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return ERR_PTR(-EINVAL);	/* PRQA S 0306 */
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0)),
++		      XF_ALLOC,
++		      buf_length * pool_size, NULL, NULL); /* PRQA S 3200 */
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		return ERR_PTR(-ENOMEM);		/* PRQA S 0306 */
++
++	/* PRQA S 0306 1 */
++	pool = kmalloc(offset_of(struct xf_pool, buffer) +
++		       (pool_size * sizeof(struct xf_buffer)), GFP_KERNEL);
++
++	if (!pool)
++		return ERR_PTR(-ENOMEM);	/* PRQA S 0306 */
++
++	pool->length = buf_length;
++	pool->number = pool_size;
++	pool->p = msg.buffer;
++
++	number = pool_size;
++	for (pool->free = b = &pool->buffer[0], data = pool->p;
++	     number > 0; number--, b++) {	/* PRQA S 2462,3418,0489 */
++		/* set address of the buffer */
++		b->address = data;
++
++		/* fill buffer into free list */
++		if (number == 1)
++			b->link.next = NULL;
++		else
++			b->link.next = b + 1;		/* PRQA S 0489 */
++
++		/* advance data pointer in contigous buffer */
++		data += buf_length;		/* PRQA S 0550 */
++	}
++
++	return pool;
++}
++
++/** ***********************************************************
++ *\brief return memory to shared memory
++ *\param[in]	pool	Data pool address
++ *\retval	0	Success
++ *\retval	-EINVAL Invalid base or pool data
++ **************************************************************/
++int xf_adsp_free_mem_pool(struct xf_pool *pool)
++{
++	struct xf_message msg;
++
++	/* check the sane ADSP base pool data*/
++	if (!base || !pool)
++		return -EINVAL;
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0)),
++		      XF_FREE, pool->number * pool->length,
++		      pool->p, NULL);		/* PRQA S 3200 */
++
++	xf_send_and_receive(&msg);		/* PRQA S 3200 */
++
++	kfree(pool);
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief get buffer from given pool
++ *
++ *\param[in]	pool	Data pool address
++ *\param[in]	index   Buffer index
++ *\retval	b	Pointer to buffer address in pool
++ *\retval	-EINVAL Invalid pool or index
++ **************************************************************/
++char *xf_adsp_get_data_from_pool(struct xf_pool *pool, int index)
++{
++	struct xf_buffer *buf[XF_BUF_POOL_SIZE] = {0};
++	char *data;
++	int i;
++
++	/* check the sane pool data*/
++	if (!pool)
++		return ERR_PTR(-EINVAL);		/* PRQA S 306 */
++
++	/* check the index is valid */
++	if (index > (pool->number - 1))
++		return ERR_PTR(-EINVAL);		/* PRQA S 306 */
++
++	/* get buffer from pool */
++	for (i = 0; i <= index; i++)
++		buf[i] = xf_buffer_get(pool);
++
++	/* get data from buffer */
++	data = xf_buffer_data(buf[index]);
++
++	/* return buffer to pool */
++	for (i = index; i >= 0; i--)
++		xf_buffer_put(buf[i]);
++
++	return data;
++}
++
++/** ***********************************************************
++ *\brief  send empty this buffer command to ADSP framework
++ *
++ *\param[in]	handle_id	ID of the registered handle
++ *\param[in]	buffer		Pointer to data buffer
++ *\param[in]	length		Size of buffer in bytes
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_empty_this_buffer(int handle_id, char *buffer, int length)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	/* submit message to port 0 of component */
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_EMPTY_THIS_BUFFER, length, buffer, NULL);
++
++	xf_send(&msg);		/* PRQA S 3200 */
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief  send fill this buffer command to ADSP framework
++ *
++ *\param[in]	handle_id	ID of the registered handle
++ *\param[in]	buffer		Pointer to data buffer
++ *\param[in]	length		Size of buffer in bytes
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_fill_this_buffer(int handle_id, char *buffer, int length)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	/* submit message to port 1 of component */
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 1)),
++		      XF_FILL_THIS_BUFFER, length, buffer, NULL);
++
++	xf_send(&msg);		/* PRQA S 3200 */
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief route data between two registered ADSP plugins
++ *
++ *\param[in]	src_handle_id	Handle ID of source plugin
++ *\param[in]	dst_handle_id	Handle ID of sink plugin
++ *\param[in]	buf_cnt		Number of buffer in tunnel
++ *\param[in]	buf_size	Size of each buffer in tunnel
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int
++xf_adsp_route(int src_handle_id, int dst_handle_id, int buf_cnt, int buf_size)
++{
++	struct xf_route_port_msg *route_msg;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	struct xf_handle *dst_handle, *src_handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	/* get handle data */
++	dst_handle = xf_adsp_base_get_handle(dst_handle_id);
++	src_handle = xf_adsp_base_get_handle(src_handle_id);
++
++	if (!dst_handle || !src_handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	route_msg = xf_buffer_data(b);
++
++	/* route information */
++	route_msg->dst = __XF_PORT_SPEC2(dst_handle->comp_id, 0);
++	route_msg->alloc_align = 4;
++	route_msg->alloc_number = buf_cnt;
++	route_msg->alloc_size = buf_size;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, src_handle_id),
++				  __XF_PORT_SPEC2(src_handle->comp_id, 1)),
++		      XF_ROUTE, sizeof(*route_msg), route_msg, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief set a single parameter
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\param[in]	index		Sub-command index of parameter
++ *\param[in]	value		the setting value
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_set_param(int handle_id, int index, int value)
++{
++	struct xf_message msg;
++	struct xf_buffer *b;
++	struct xf_set_param_msg *msg_params;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	msg_params->item[0].id = index;
++	msg_params->item[0].value = value;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(1), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief get a single parameter
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\param[in]	index		Sub-command index of parameter
++ *\param[out]	value		Store the getting value
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_get_param(int handle_id, int index, int *value)
++{
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base and value data */
++	if (!base || !value)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	msg_params->c.id[0] = index;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(1), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	*value = msg_params->r.value[0];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/***************************************************
++ * APIs for ADSP base control
++ * ************************************************/
++
++/** ***********************************************************
++ *\brief initialize ADSP base's instance
++ *
++ *\retval 0	  Success
++ *\retval -EINVAL ADSP base's instance has been initialized
++ *\retval -ENOMEM Cannot allocate memory for ADSP base
++ *\retval -EBUSY  Cannot register client to proxy
++ **************************************************************/
++int xf_adsp_base_create(struct xf_adsp_base_cmd *cmd)
++{
++	int err = 0;
++
++	if (base != 0)
++		return -EINVAL;
++
++	if (!cmd || !cmd->recv || !cmd->send || !cmd->poll ||
++	    !cmd->client_register || !cmd->client_unregister)
++		return -EINVAL;
++
++	base = kmalloc(sizeof(*base), GFP_KERNEL);
++	if (!base)
++		return -ENOMEM;
++
++	memset(base, 0, sizeof(struct xf_adsp_base));	/* PRQA S 3200 */
++
++	/* store the proxy command */
++	memcpy(&base->cmd, cmd, sizeof(struct xf_adsp_base_cmd));
++
++	/* create client to connect from proxy driver */
++	err = base->cmd.client_register(&base->client);
++	if (err != 0)
++		goto err3;		/* PRQA S 2001 */
++
++	/* initialize waiting queue */
++	init_waitqueue_head(&base->base_wait);
++
++	/* initialize handle */
++	xf_adsp_base_init_handle();
++
++	/* create thread to get the responsed message from proxy */
++	base->rsp_thread = kthread_run(&xf_response_thread,
++				       (void *)base, "adsp base");
++
++	if (base->rsp_thread != 0) {
++		pr_info("ADSP base thread has been started.\n");
++	} else {
++		pr_info("Failed in create base thread\n");
++		err = -ENOMEM;
++		goto err2;		/* PRQA S 2001 */
++	}
++
++	/* allocate auxiliary pool for component usage */
++	base->aux_pool = xf_adsp_allocate_mem_pool(
++					XF_AUX_POOL_SIZE,
++					XF_ALIGNED(XF_AUX_POOL_MSG_LENGTH));
++
++	if (IS_ERR(base->aux_pool)) {		/* PRQA S 306 */
++		err = -ENOMEM;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	pr_info("ADSP base was created\n");
++	return 0;
++
++err1:
++	/* cancel the waitting queue */
++	spin_lock(&base->lock);
++	base->wait_flag = TRUE;
++	spin_unlock(&base->lock);
++
++	/* stop thread inadvance */
++	kthread_stop(base->rsp_thread);
++
++err2:
++	base->cmd.client_unregister(base->client);
++
++err3:
++	kfree(base);
++	base = NULL;
++
++	return err;
++}
++EXPORT_SYMBOL(xf_adsp_base_create);		/* PRQA S 0651 */
++
++/** ***********************************************************
++ *\brief deinitialize ADSP base's instance
++ *
++ *\retval	 0	   Success
++ *\retval	 -EINVAL Invalid ADSP base's instance
++ **************************************************************/
++int xf_adsp_base_destroy(void)
++{
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	/* free auxiliary pool to shared memory */
++	xf_adsp_free_mem_pool(base->aux_pool);		/* PRQA S 3200 */
++
++	/* cancel wait the response message, go to stop process */
++	spin_lock(&base->lock);
++	base->wait_flag = TRUE;
++	spin_unlock(&base->lock);
++
++	/* stop response thread */
++	kthread_stop(base->rsp_thread);
++
++	/* unregister client */
++	base->cmd.client_unregister(base->client);
++
++	kfree(base);
++	base = NULL;
++
++	pr_info("ADSP base was destroyed\n");
++	return 0;
++}
++EXPORT_SYMBOL(xf_adsp_base_destroy);		/* PRQA S 0651 */
++
++/** ***********************************************************
++ *	\brief initialize handle instance
++ **************************************************************/
++static inline void xf_adsp_base_init_handle(void)
++{
++	int i;
++
++	for (i = 0; i < MAX_HANDLE; i++)
++		base->handle[i] = NULL;
++}
++
++/** ***********************************************************
++ *\brief get the next available handle ID for register
++ *
++ *\retval -1		Unavailable handle ID
++ *\retval 0 to 255	Available handle ID
++ **************************************************************/
++static inline int xf_adsp_base_get_valid_handle(void)
++{
++	int id = -1;
++	int i;
++
++	for (i = 0; i < MAX_HANDLE; i++) {
++		/* get the id of the first available handler */
++		if (!base->handle[i]) {
++			id = i;
++			break;
++		}
++	}
++
++	return id;
++}
++
++/** ***********************************************************
++ *\brief register a handle instance for component usage
++ *
++ *\param[in]	 private_data	Private data of this component
++ *\param[in]	 cb		Callback function
++ *\param[in]	 comp_id	ID of register component
++ *\retval	 id		ID of registered handle
++ *\retval	 -EINVAL	Cannot get the handle instance
++ *\retval	 -ENOMEM	Cannot allocate handle memory
++ **************************************************************/
++static int xf_adsp_base_register_handle(void *private_data,
++					struct xf_callback_func *cb,
++					int comp_id)
++{
++	struct xf_handle *handle;
++	int id;
++
++	/* get the next handle id */
++	id = xf_adsp_base_get_valid_handle();
++
++	/* check available handle in base */
++	if (id < 0)
++		return -EINVAL;
++
++	/* allocate handle data */
++	handle = kmalloc(sizeof(*handle), GFP_KERNEL);
++	if (!handle)
++		return -ENOMEM;
++
++	/* save handle data */
++	handle->private_data = private_data;
++	handle->cb = cb;
++	handle->comp_id = comp_id;
++
++	/* save the hanle data */
++	base->handle[id] = handle;
++
++	/* return the id numbering in base handle */
++	return (id + 1);
++}
++
++/** ***********************************************************
++ *\brief  get handle instance from handle ID
++ *
++ *\param[in]	 handle_id	ID of registered handle
++ *\retval	 handle		Pointer to handle instance
++ **************************************************************/
++static inline struct xf_handle *xf_adsp_base_get_handle(int handle_id)
++{
++	return base->handle[handle_id - 1];
++}
++
++/** ***********************************************************
++ *\brief free the registered handle instance
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\retval	0		Success
++ *\retval	-EINVAL		Invalid handle ID
++ **************************************************************/
++static int xf_adsp_base_free_handle(int handle_id)
++{
++	if (handle_id < 1 || handle_id > MAX_HANDLE)
++		return -EINVAL;
++
++	kfree(base->handle[handle_id - 1]);
++	base->handle[handle_id - 1] = NULL;
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Renderer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Renderer parameters
++ *
++ *\param[in]	renderer	Pointer to Renderer component
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_renderer_set_params(struct xf_adsp_renderer *renderer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_renderer_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	params = &renderer->params;
++
++	/* get Renderer's handle data */
++	handle = xf_adsp_base_get_handle(renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_CHANNELS;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUT_CHANNELS;
++	msg_params->item[i++].value = params->out_channel;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_MIX_CONTROL;
++	msg_params->item[i++].value = params->mix_ctrl;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_STATE;
++	msg_params->item[i++].value = params->state;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Renderer parameters
++ *
++ *\param[in]	renderer	Pointer to Renderer component
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++/* PRQA S 1505 */
++int xf_adsp_renderer_get_params(struct xf_adsp_renderer *renderer)
++{
++	struct xf_adsp_renderer_params *rdr_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	rdr_params = &renderer->params;
++
++	/* get Renderer's handle data */
++	handle = xf_adsp_base_get_handle(renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_CHANNELS;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUT_CHANNELS;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_MIX_CONTROL;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_STATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	rdr_params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	rdr_params->channel = msg_params->r.value[i++];
++	rdr_params->pcm_width = msg_params->r.value[i++];
++	rdr_params->frame_size = msg_params->r.value[i++];
++	rdr_params->dev1 = msg_params->r.value[i++];
++	rdr_params->dev2 = msg_params->r.value[i++];
++	rdr_params->dma1 = msg_params->r.value[i++];
++	rdr_params->dma2 = msg_params->r.value[i++];
++	rdr_params->out_rate = msg_params->r.value[i++];
++	rdr_params->vol_rate = msg_params->r.value[i++];
++	rdr_params->out_channel = msg_params->r.value[i++];
++	rdr_params->mix_ctrl = msg_params->r.value[i++];
++	rdr_params->state = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Renderer component
++ *
++ *\param[in,out]  renderer	Pointer to the registered component
++ *\param[in]	  cb		Callback function
++ *\param[in]	  private_data	Private data
++ *\retval	  0		Success
++ *\retval	 -EINVAL	Invalid base instance or register fail
++ *\retval	 -ENOMEM	Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_renderer_create(struct xf_adsp_renderer **renderer,
++			    struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_renderer *rdr;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	rdr = kmalloc(sizeof(*rdr), GFP_KERNEL);
++	if (!rdr)
++		return -ENOMEM;
++
++	memset(rdr, 0, sizeof(struct xf_adsp_renderer)); /* PRQA S 3200 */
++
++	/* register renderer component */
++	err = xf_adsp_register("renderer", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register Renderer to ADSP base control */
++	rdr->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (rdr->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from Renderer plugin */
++	err = xf_adsp_renderer_get_params(rdr);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save renderer compoent data */
++	*renderer = rdr;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(rdr);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Renderer component
++ *
++ *\param[in]	 renderer	Pointer to Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_renderer_destroy(struct xf_adsp_renderer *renderer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	handle_id = renderer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(renderer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Capture component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Capture parameters
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++int xf_adsp_capture_set_params(struct xf_adsp_capture *capture)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_capture_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	params = &capture->params;
++
++	/* get Capture's handle data */
++	handle = xf_adsp_base_get_handle(capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_CHANNELS;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_STATE;
++	msg_params->item[i++].value = params->state;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Capture parameters
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++/* PRQA S 1505 */
++int xf_adsp_capture_get_params(struct xf_adsp_capture *capture)
++{
++	struct xf_adsp_capture_params *cap_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	cap_params = &capture->params;
++
++	/* get Capture's handle data */
++	handle = xf_adsp_base_get_handle(capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 11 1*/
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_CHANNELS;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_STATE;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	cap_params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 11 */
++	cap_params->channel = msg_params->r.value[i++];
++	cap_params->pcm_width = msg_params->r.value[i++];
++	cap_params->frame_size = msg_params->r.value[i++];
++	cap_params->dev1 = msg_params->r.value[i++];
++	cap_params->dev2 = msg_params->r.value[i++];
++	cap_params->dma1 = msg_params->r.value[i++];
++	cap_params->dma2 = msg_params->r.value[i++];
++	cap_params->out_rate = msg_params->r.value[i++];
++	cap_params->vol_rate = msg_params->r.value[i++];
++	cap_params->state = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Capture component
++ *
++ *\param[in,out]  capture	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Capture instance
++ *****************************************************************************/
++int xf_adsp_capture_create(struct xf_adsp_capture **capture,
++			   struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_capture *cap;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	cap = kmalloc(sizeof(*cap), GFP_KERNEL);
++	if (!cap)
++		return -ENOMEM;
++
++	memset(cap, 0, sizeof(struct xf_adsp_capture));	/* PRQA S 3200 */
++
++	/* register capture component */
++	err = xf_adsp_register("capture", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register capture to ADSP base control */
++	cap->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (cap->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from capture plugin */
++	err = xf_adsp_capture_get_params(cap);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save capture compoent data */
++	*capture = cap;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);	/* PRQA S 3200 */
++
++err2:
++	kfree(cap);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Capture component
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Capture data
++ **************************************************************/
++int xf_adsp_capture_destroy(struct xf_adsp_capture *capture) /* PRQA S 3673 */
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	handle_id = capture->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);	/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);	/* PRQA S 3200 */
++
++exit:
++	kfree(capture);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Equalizer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Equalizer parameters
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++int xf_adsp_equalizer_set_params(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_equalizer_params    *params;
++	struct xf_buffer    *b;
++	int i, n;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	params = &equalizer->params;
++
++	/* get Equalizer's handle data */
++	handle = xf_adsp_base_get_handle(equalizer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_COEF_FS;
++	msg_params->item[i++].value = params->rate;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_CH;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_EQZ_TYPE;
++	msg_params->item[i++].value = params->eqz_type;
++
++	if (params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		struct xf_equalizer_parametric_coef *coef = &params->p_coef;
++
++		for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE + n;
++			msg_params->item[i++].value = coef->type[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC + n;
++			msg_params->item[i++].value = coef->fc[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW + n;
++			msg_params->item[i++].value = coef->band_width[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA + n;
++			msg_params->item[i++].value = coef->gain[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA + n;
++			msg_params->item[i++].value = coef->gain_base[n];
++		}
++	} else {
++		struct xf_equalizer_graphic_coef *coef = &params->g_coef;
++
++		for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++) {
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA + n;
++			msg_params->item[i++].value = coef->gain_g[n];
++		}
++	}
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, equalizer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Equalizer parameters
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_equalizer_get_params(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_adsp_equalizer_params *eqz_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i, n;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	eqz_params = &equalizer->params;
++
++	/* get Equalizer's handle data */
++	handle = xf_adsp_base_get_handle(equalizer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_COEF_FS; /* PRQA S 3440 4 */
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_CH;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_EQZ_TYPE;
++
++	for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++		/* PRQA S 3440 5 */
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA + n;
++	}
++
++	for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++)
++		/* PRQA S 3440 1 */
++		msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA + n;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, equalizer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	eqz_params->rate = msg_params->r.value[i++];	/* PRQA S 3440 4 */
++	eqz_params->channel = msg_params->r.value[i++];
++	eqz_params->pcm_width = msg_params->r.value[i++];
++	eqz_params->eqz_type = msg_params->r.value[i++];
++
++	for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++		/* PRQA S 3440 5 */
++		eqz_params->p_coef.type[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.fc[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.band_width[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.gain[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.gain_base[n] = msg_params->r.value[i++];
++	}
++
++	for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++) {
++		/* PRQA S 3440 1 */
++		eqz_params->g_coef.gain_g[n] = msg_params->r.value[i++];
++	}
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Equalizer component
++ *
++ *\param[in,out]  equalizer	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Equalier instance
++ *****************************************************************************/
++int xf_adsp_equalizer_create(struct xf_adsp_equalizer **equalizer,
++			     struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_equalizer *eqz;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	eqz = kmalloc(sizeof(*eqz), GFP_KERNEL);
++	if (!eqz)
++		return -ENOMEM;
++
++	memset(eqz, 0, sizeof(struct xf_adsp_equalizer)); /* PRQA S 3200 */
++
++	/* register equalizer component */
++	err = xf_adsp_register("equalizer", &comp_id);
++	if (err != 0)
++		goto err2;			/* PRQA S 2001 */
++
++	/* register equalizer to ADSP base control */
++	eqz->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (eqz->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;			/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from equalizer plugin */
++	err = xf_adsp_equalizer_get_params(eqz);
++	if (err != 0)
++		goto err1;			/* PRQA S 2001 */
++
++	/* save equalizer compoent data */
++	*equalizer = eqz;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(eqz);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Equalizer component
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Equalizer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_equalizer_destroy(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base and Equalizer data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	handle_id = equalizer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);	/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);	/* PRQA S 3200 */
++
++exit:
++	kfree(equalizer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for TDM Renderer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP TDM Renderer parameters
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++int xf_adsp_tdm_renderer_set_params(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_tdm_renderer_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	params = &tdm_renderer->params;
++
++	/* get TDM Renderer's handle data */
++	handle = xf_adsp_base_get_handle(tdm_renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->item[i++].value = params->ch_mode;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP TDM Renderer parameters
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_tdm_renderer_get_params(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_adsp_tdm_renderer_params *params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	params = &tdm_renderer->params;
++
++	/* get TDM Renderer's handle data */
++	handle = xf_adsp_base_get_handle(tdm_renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	params->ch_mode = msg_params->r.value[i++];
++	params->pcm_width = msg_params->r.value[i++];
++	params->frame_size = msg_params->r.value[i++];
++	params->dev1 = msg_params->r.value[i++];
++	params->dev2 = msg_params->r.value[i++];
++	params->dma1 = msg_params->r.value[i++];
++	params->dma2 = msg_params->r.value[i++];
++	params->out_rate = msg_params->r.value[i++];
++	params->vol_rate = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create TDM Renderer component
++ *
++ *\param[in,out]  tdm_renderer	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_tdm_renderer_create(struct xf_adsp_tdm_renderer **tdm_renderer,
++				struct xf_callback_func *cb,
++				void *private_data)
++{
++	struct xf_adsp_tdm_renderer *tdm_rdr;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	tdm_rdr = kmalloc(sizeof(*tdm_rdr), GFP_KERNEL);
++	if (!tdm_rdr)
++		return -ENOMEM;
++
++	/* PRQA S 3200 */
++	memset(tdm_rdr, 0, sizeof(struct xf_adsp_tdm_renderer));
++
++	/* register TDM Renderer component */
++	err = xf_adsp_register("tdm-renderer", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register TDM Renderer to ADSP base control */
++	tdm_rdr->handle_id = xf_adsp_base_register_handle(private_data,
++							  cb, comp_id);
++
++	if (tdm_rdr->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from plugin */
++	err = xf_adsp_tdm_renderer_get_params(tdm_rdr);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save compoent data */
++	*tdm_renderer = tdm_rdr;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(tdm_rdr);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP TDM Renderer component
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 1*/
++int xf_adsp_tdm_renderer_destroy(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	handle_id = tdm_renderer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(tdm_renderer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for TDM Capture component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP TDM Capture parameters
++ *
++ *\param[in]	 tdm_capture	Pointer to TDM Capture component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++int xf_adsp_tdm_capture_set_params(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_tdm_capture_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	params = &tdm_capture->params;
++
++	/* get TDM Capture's handle data */
++	handle = xf_adsp_base_get_handle(tdm_capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->item[i++].value = params->ch_mode;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP TDM Capture parameters
++ *
++ *\param[in]	 tdm_capture	Pointer to TDM Capture component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_tdm_capture_get_params(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_adsp_tdm_capture_params *params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	params = &tdm_capture->params;
++
++	/* get TDM Capture's handle data */
++	handle = xf_adsp_base_get_handle(tdm_capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	params->ch_mode = msg_params->r.value[i++];
++	params->pcm_width = msg_params->r.value[i++];
++	params->frame_size = msg_params->r.value[i++];
++	params->dev1 = msg_params->r.value[i++];
++	params->dev2 = msg_params->r.value[i++];
++	params->dma1 = msg_params->r.value[i++];
++	params->dma2 = msg_params->r.value[i++];
++	params->out_rate = msg_params->r.value[i++];
++	params->vol_rate = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create TDM Capture component
++ *
++ *\param[in,out]  tdm_capture	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_tdm_capture_create(struct xf_adsp_tdm_capture **tdm_capture,
++			       struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_tdm_capture *tdm_cap;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	tdm_cap = kmalloc(sizeof(*tdm_cap), GFP_KERNEL);
++	if (!tdm_cap)
++		return -ENOMEM;
++
++	/* PRQA S 3200 */
++	memset(tdm_cap, 0, sizeof(struct xf_adsp_tdm_capture));
++
++	/* register TDM Capture component */
++	err = xf_adsp_register("tdm-capture", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register TDM Capture to ADSP base control */
++	tdm_cap->handle_id = xf_adsp_base_register_handle(private_data,
++							  cb, comp_id);
++
++	if (tdm_cap->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from plugin */
++	err = xf_adsp_tdm_capture_get_params(tdm_cap);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save compoent data */
++	*tdm_capture = tdm_cap;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(tdm_cap);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP TDM Capture component
++ *
++ *\param[in]	 tdm_capture	 Pointer to TDM Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_tdm_capture_destroy(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	handle_id = tdm_capture->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(tdm_capture);
++
++	return 0;
++}
+diff --git a/sound/soc/adsp/xf-adsp-base.h b/sound/soc/adsp/xf-adsp-base.h
+new file mode 100644
+index 0000000..27eb084
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-base.h
+@@ -0,0 +1,275 @@
++/** *************************************************************************
++ *\file		xf-adsp-base.h
++ *\brief	Header file for ADSP Base Control layer
++ *\addtogroup	ADSP Driver
++ ****************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ ****************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_BASE_H
++#define __XF_ADSP_BASE_H
++
++#include "xf-adsp-config.h"
++#include <adsp_drv/xf-adsp-drv-ext.h>
++
++#define XF_BUF_POOL_SIZE	(4)	 /**< number of buffer in a data pool */
++
++/**< maximum number of DSP component can be registered */
++#define MAX_HANDLE		(256)
++
++/* define boolean */
++#define TRUE			(1)
++#define FALSE			(0)
++
++/** \struct xf_callback_func
++ *  \brief  callback function for ADSP's response message
++ */
++struct xf_callback_func {
++	/** callback for empty buffer done message */
++	int (*empty_buf_done)(void *data, int opcode, int length, char *buffer);
++
++	/** callback for fill buffer done message */
++	int (*fill_buf_done)(void *data, int opcode, int length, char *buffer);
++
++	/** callback for event handler */
++	int (*event_handler)(void *data);
++};
++
++/** \struct xf_adsp_renderer_params
++ *  \brief  parameter structure for Renderer component
++ */
++struct xf_adsp_renderer_params {
++	int	 channel;	/**< channel number		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++	int	 out_channel;	/**< output channels		*/
++	int	 mix_ctrl;	/**< mix control flag		*/
++	int	 state;		/**< operation state		*/
++};
++
++/** \struct xf_adsp_renderer
++ *  \brief  Renderer component structure
++ */
++struct xf_adsp_renderer {
++	struct xf_adsp_renderer_params   params; /**< parameter structure*/
++	struct xf_pool   *buf_pool;  /**< buffer pool for data transfer  */
++	int		 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_adsp_capture_params
++ *\brief  parameter structure of Capture component
++ */
++struct xf_adsp_capture_params {
++	int	 channel;	/**< channel number		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++	int	 state;		/**< operation state		*/
++};
++
++/** \struct xf_adsp_capture
++ *  \brief  Capture component structure
++ */
++struct xf_adsp_capture {
++	struct xf_adsp_capture_params	params;	 /**< parameter structuer*/
++	struct xf_pool   *buf_pool;  /**< buffer pool for data transfer  */
++	int		 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_equalizer_parametric_coef
++ *\brief  Parametric Equalizer type's parameters
++ */
++struct xf_equalizer_parametric_coef {
++	int  type[XA_REL_EQZ_FILTER_NUM];		/**< Filter type */
++	int  fc[XA_REL_EQZ_FILTER_NUM];	  /**< Filter center frequency */
++	int  gain[XA_REL_EQZ_FILTER_NUM];	/**< Filter gain */
++	int  band_width[XA_REL_EQZ_FILTER_NUM];  /**< Filter band width	  */
++	int  gain_base[XA_REL_EQZ_FILTER_NUM];   /**< Filter base gain	  */
++};
++
++/** \struct xf_equalizer_graphic_coef
++ *  \brief  Graphic Equalizer type's parameters
++ */
++struct xf_equalizer_graphic_coef {
++	int  gain_g[XA_REL_EQZ_GRAPHIC_BAND_NUM];/**< Graphic equalizer gain */
++};
++
++/** \struct xf_adsp_equalizer_params
++ *\brief  Equalizer parameters
++ */
++struct xf_adsp_equalizer_params {
++	int		 channel;	/**< channel number	 */
++	int		 pcm_width;	/**< PCM width		 */
++	int		 rate;		/**< sampling rate	 */
++	int		 eqz_type;	/**< Equalizer type	 */
++	struct xf_equalizer_parametric_coef  p_coef; /**< Parametric params */
++	struct xf_equalizer_graphic_coef g_coef; /**< Graphic params */
++};
++
++/** \struct xf_adsp_equalizer
++ *  \brief  Equalizer component's structure
++ */
++struct xf_adsp_equalizer {
++	struct xf_adsp_equalizer_params   params;/**< Equalizer parameters   */
++	struct xf_pool	  *buf_pool;  /**< buffer pool for transfer data  */
++	int		  handle_id; /**< ID of registered handle	*/
++};
++
++/** \struct xf_adsp_tdm_renderer_params
++ *  \brief  parameter structure for TDM Renderer component
++ */
++struct xf_adsp_tdm_renderer_params {
++	int		 ch_mode;	/**< channel mode		*/
++	int		 pcm_width;	/**< PCM width			*/
++	int		 frame_size;	/**< frame size			*/
++	int		 in_rate;	/**< input sampling rate	*/
++	int		 out_rate;	/**< output sampling rate	*/
++	int		 vol_rate;	/**< volume rate		*/
++	int		 dev1;		/**< 1st device index		*/
++	int		 dev2;		/**< 2nd device index		*/
++	int		 dma1;		/**< 1st DMA index		*/
++	int		 dma2;		/**< 2nd DMA index		*/
++};
++
++/** \struct xf_adsp_tdm_renderer
++ *  \brief  TDM Renderer component structure
++ */
++struct xf_adsp_tdm_renderer {
++	struct xf_adsp_tdm_renderer_params   params; /**< parameter structure*/
++	struct xf_pool	  *buf_pool;  /**< buffer pool for data transfer  */
++	int	 handle_id;  /**< ID of registered handle	*/
++};
++
++/** \struct xf_adsp_tdm_capture_params
++ *  \brief  parameter structure for TDM Capture component
++ */
++struct xf_adsp_tdm_capture_params {
++	int	 ch_mode;	/**< channel mode		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++};
++
++/** \struct xf_adsp_tdm_capture
++ *  \brief  TDM Capture component structure
++ */
++struct xf_adsp_tdm_capture {
++	struct xf_adsp_tdm_capture_params  params; /**< parameter structure*/
++	struct xf_pool	   *buf_pool;  /**< buffer pool for data transfer  */
++	int	 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_handle
++ *  \brief Handle struct for each ADSP component
++ */
++struct xf_handle {
++	int	 comp_id;/**< ADSP component ID	  */
++	struct xf_callback_func  *cb;/**< callback functions	 */
++	void	*private_data;  /**< private data for callback functions*/
++};
++
++/** \struct xf_adsp_base
++ *  \brief Base component structure
++ */
++struct xf_adsp_base {
++	struct xf_adsp_base_cmd  cmd; /**< proxy commands	 */
++	void	*client; /**< client data which registered to proxy  */
++	struct xf_pool	 *aux_pool;  /**< auxiliary buffer pool data	 */
++	struct xf_handle *handle[MAX_HANDLE];	/**< handler data   */
++	struct task_struct *rsp_thread;/**< thread for response message*/
++	wait_queue_head_t base_wait;	 /**< ADSP base's waiting queue	 */
++	struct xf_message base_msg;   /**< ADSP base's response message   */
++	int base_flag;  /**< flag to control its waiting queue  */
++	int err_flag;  /**< flag to indicate a error from plugins */
++	int wait_flag;  /**< flag to control the polling waiting*/
++	spinlock_t lock; /**< spinlock data */
++};
++
++struct xf_pool *xf_adsp_allocate_mem_pool(int pool_size, int buf_length);
++int xf_adsp_free_mem_pool(struct xf_pool *pool);
++char *xf_adsp_get_data_from_pool(struct xf_pool *pool, int index);
++
++int xf_adsp_empty_this_buffer(int handle_id, char *buffer, int length);
++int xf_adsp_fill_this_buffer(int handle_id, char *buffer, int length);
++
++int xf_adsp_route(int src_handle_id, int dst_handle_id
++		 , int buf_cnt, int buf_size);
++
++int xf_adsp_set_param(int handle_id, int index, int value);
++int xf_adsp_get_param(int handle_id, int index, int *value);
++
++int xf_adsp_renderer_create(struct xf_adsp_renderer **renderer,
++			    struct xf_callback_func *cb, void *private_data);
++int xf_adsp_renderer_destroy(struct xf_adsp_renderer *renderer);
++int xf_adsp_renderer_set_params(struct xf_adsp_renderer *renderer);
++int xf_adsp_renderer_get_params(struct xf_adsp_renderer *renderer);
++
++int xf_adsp_capture_create(struct xf_adsp_capture **capture,
++			   struct xf_callback_func *cb, void *private_data);
++int xf_adsp_capture_destroy(struct xf_adsp_capture *capture);
++int xf_adsp_capture_set_params(struct xf_adsp_capture *capture);
++int xf_adsp_capture_get_params(struct xf_adsp_capture *capture);
++
++int xf_adsp_equalizer_create(struct xf_adsp_equalizer **equalizer,
++			     struct xf_callback_func *cb, void *private_data);
++int xf_adsp_equalizer_destroy(struct xf_adsp_equalizer *equalizer);
++int xf_adsp_equalizer_set_params(struct xf_adsp_equalizer *equalizer);
++int xf_adsp_equalizer_get_params(struct xf_adsp_equalizer *equalizer);
++
++int xf_adsp_tdm_renderer_create(struct xf_adsp_tdm_renderer **tdm_renderer,
++				struct xf_callback_func *cb,
++				void *private_data);
++int xf_adsp_tdm_renderer_destroy(struct xf_adsp_tdm_renderer *tdm_renderer);
++int xf_adsp_tdm_renderer_set_params(struct xf_adsp_tdm_renderer *tdm_renderer);
++int xf_adsp_tdm_renderer_get_params(struct xf_adsp_tdm_renderer *tdm_renderer);
++
++int xf_adsp_tdm_capture_create(struct xf_adsp_tdm_capture **tdm_capture,
++			       struct xf_callback_func *cb,
++			       void *private_data);
++int xf_adsp_tdm_capture_destroy(struct xf_adsp_tdm_capture *tdm_capture);
++int xf_adsp_tdm_capture_set_params(struct xf_adsp_tdm_capture *tdm_capture);
++int xf_adsp_tdm_capture_get_params(struct xf_adsp_tdm_capture *tdm_capture);
++
++#endif
+diff --git a/sound/soc/adsp/xf-adsp-config.h b/sound/soc/adsp/xf-adsp-config.h
+new file mode 100644
+index 0000000..818a46a
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-config.h
+@@ -0,0 +1,604 @@
++/** ****************************************************************************
++ *\file		xf-adsp-config.h
++ *\brief	Header file for ADSP configuration
++ *\addtogroup	ADSP Driver
++ *******************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ *******************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_CONFIG_H
++#define __XF_ADSP_CONFIG_H
++
++/* Equalizer definition */
++#define XA_REL_EQZ_FILTER_NUM		(9) /**< number of filter */
++#define XA_REL_EQZ_GRAPHIC_BAND_NUM	(5) /**< number of graphic band */
++
++struct xf_buffer {
++	void			*address;
++	union {						/* PRQA S 750 3 */
++		struct xf_buffer *next;
++		struct xf_pool   *pool;
++	} link;
++};
++
++struct xf_pool {
++	/* length of individual buffer in a pool */
++	u32			length;
++
++	/* number of buffer in a pool */
++	u32			number;
++
++	/* pointer to pool memory */
++	void			*p;
++
++	/* pointer to first free buffer in a pool */
++	struct xf_buffer	*free;
++
++	/* individual buffer */
++	struct xf_buffer	buffer[0];		/* PRQA S 1037 */
++};
++
++struct xf_message {
++	/* pointer to the next item in the list */
++	struct xf_message	*next;
++
++	/* shmem session_id */
++	u32			id;
++
++	/* operation code */
++	u32			opcode;
++
++	/* length of attached message buffer */
++	u32			length;
++
++	/* message buffer */
++	void			*buffer;
++};
++
++/*******************************************************************************
++ * XF_GET_PARAM message
++ ******************************************************************************/
++
++/* ...message body (command/response) */
++union xf_get_param_msg {			/* PRQA S 750 18 */
++	/* ...command structure */
++	struct {
++		/* ...array of parameters requested */
++		u32		id[0];	/* PRQA S 1037 */
++
++	}   __attribute__((__packed__)) c;
++
++	/* ...response structure */
++	struct {
++		/* ...array of parameters values */
++		u32		value[0];/* PRQA S 1037 */
++
++	}   __attribute__((__packed__)) r;
++
++};
++
++/* ...length of the XF_GET_PARAM command/response */
++/* PRQA S 3453 2 */
++#define XF_GET_PARAM_CMD_LEN(params)	(sizeof(u32) * (params))
++#define XF_GET_PARAM_RSP_LEN(params)	(sizeof(u32) * (params))
++
++/*******************************************************************************
++ * XF_SET_PARAM message
++ ******************************************************************************/
++
++/* ...component initialization parameter */
++struct xf_set_param_item {
++	/* ...index of parameter passed to SET_CONFIG_PARAM call */
++	u32				 id;
++
++	/* ...value of parameter */
++	u32				 value;
++
++}   __attribute__ ((__packed__));
++
++/* ...message body (no response message? - tbd) */
++struct xf_set_param_msg {
++	/* ...command message */
++	struct xf_set_param_item	 item[0];	/* PRQA S 1037 */
++
++}   __attribute__ ((__packed__));
++
++/* ...length of the command message */
++/* PRQA S 3453 */
++#define XF_SET_PARAM_CMD_LEN(params) \
++	(sizeof(struct xf_set_param_item) * (params))
++
++/*******************************************************************************
++ * XF_ROUTE definition
++ ******************************************************************************/
++
++/* ...port routing command */
++struct xf_route_port_msg {
++	/* ...source port specification */
++	u32				 src;
++
++	/* ...destination port specification */
++	u32				 dst;
++
++	/* ...number of buffers to allocate */
++	u32				 alloc_number;
++
++	/* ...length of buffer to allocate */
++	u32				 alloc_size;
++
++	/* ...alignment restriction for a buffer */
++	u32				 alloc_align;
++
++}	__attribute__((__packed__));
++
++/*******************************************************************************
++ * XF_UNROUTE definition
++ ******************************************************************************/
++
++/* ...port unrouting command */
++struct xf_unroute_port_msg {
++	/* ...source port specification */
++	u32				 src;
++
++	/* ...destination port specification */
++	u32				 dst;
++
++}	__attribute__((__packed__));
++
++/* ...Capture states  */
++enum xa_capture_state {
++	XA_CAP_STATE_RUN	= 0,
++	XA_CAP_STATE_IDLE	= 1,
++	XA_CAP_STATE_PAUSE	= 2
++};
++
++/* ...Renderer states  */
++enum xa_renderer_state {
++	XA_RDR_STATE_RUN	= 0,
++	XA_RDR_STATE_IDLE	= 1,
++	XA_RDR_STATE_PAUSE	= 2
++};
++
++/*******************************************************************************
++ * Message routing composition - move somewhere else - tbd
++ ******************************************************************************/
++
++/* ...adjust IPC client of message going from user-space */
++#define XF_MSG_AP_FROM_USER(id, client) \
++	(((id) & ~(0xF << 2)) | ((client) << 2))
++
++/* ...wipe out IPC client from message going to user-space */
++#define XF_MSG_AP_TO_USER(id)		   \
++	((id) & ~(0xF << 18))
++
++/* ...port specification (12 bits) */
++#define __XF_PORT_SPEC(core, id, port)  ((core) | ((id) << 2) | ((port) << 8))
++#define __XF_PORT_SPEC2(id, port)	((id) | ((port) << 8))
++#define XF_PORT_CORE(spec)		((spec) & 0x3)
++#define XF_PORT_CLIENT(spec)		(((spec) >> 2) & 0x3F)
++#define XF_PORT_ID(spec)		(((spec) >> 8) & 0xF)
++
++/* ...message id contains source and destination ports specification */
++#define __XF_MSG_ID(src, dst)	(((src) & 0xFFFF) | (((dst) & 0xFFFF) << 16))
++#define XF_MSG_SRC(id)			(((id) >> 0) & 0xFFFF)
++#define XF_MSG_SRC_CORE(id)		(((id) >> 0) & 0x3)
++#define XF_MSG_SRC_CLIENT(id)		(((id) >> 2) & 0x3F)
++#define XF_MSG_SRC_PORT(id)		(((id) >> 8) & 0xF)
++#define XF_MSG_SRC_PROXY(id)		(((id) >> 15) & 0x1)
++#define XF_MSG_DST(id)			(((id) >> 16) & 0xFFFF)
++#define XF_MSG_DST_CORE(id)		(((id) >> 16) & 0x3)
++#define XF_MSG_DST_CLIENT(id)		(((id) >> 18) & 0x3F)
++#define XF_MSG_DST_PORT(id)		(((id) >> 24) & 0xF)
++#define XF_MSG_DST_PROXY(id)		(((id) >> 31) & 0x1)
++
++/* ...special treatment of AP-proxy destination field */
++#define XF_AP_IPC_CLIENT(id)		(((id) >> 18) & 0xF)
++#define XF_AP_CLIENT(id)		(((id) >> 22) & 0x1FF)
++#define __XF_AP_PROXY(core)		((core) | 0x8000)
++#define __XF_DSP_PROXY(core)		((core) | 0x8000)
++#define __XF_AP_CLIENT(core, client)	((core) | ((client) << 6) | 0x8000)
++
++/*******************************************************************************
++ * Opcode composition
++ ******************************************************************************/
++
++/* ...opcode composition with command/response data tags */
++#define __XF_OPCODE(c, r, op)	(((c) << 31) | ((r) << 30) | ((op) & 0x3F))
++
++/* ...accessors */
++#define XF_OPCODE_CDATA(opcode)		((opcode) & (1 << 31))
++#define XF_OPCODE_RDATA(opcode)		((opcode) & (1 << 30))
++#define XF_OPCODE_TYPE(opcode)		((opcode) & (0x3F))
++
++/*******************************************************************************
++ * Opcode types
++ ******************************************************************************/
++
++/* ...unregister client */
++#define XF_UNREGISTER			__XF_OPCODE(0, 0, 0)
++
++/* ...register client at proxy */
++#define XF_REGISTER			__XF_OPCODE(1, 0, 1)
++
++/* ...port routing command */
++#define XF_ROUTE			__XF_OPCODE(1, 0, 2)
++
++/* ...port unrouting command */
++#define XF_UNROUTE			__XF_OPCODE(1, 0, 3)
++
++/* ...shared buffer allocation */
++#define XF_ALLOC			__XF_OPCODE(0, 0, 4)
++
++/* ...shared buffer freeing */
++#define XF_FREE				__XF_OPCODE(0, 0, 5)
++
++/* ...set component parameters */
++#define XF_SET_PARAM			__XF_OPCODE(1, 0, 6)
++
++/* ...get component parameters */
++#define XF_GET_PARAM			__XF_OPCODE(1, 1, 7)
++
++/* ...input buffer reception */
++#define XF_EMPTY_THIS_BUFFER		__XF_OPCODE(1, 0, 8)
++
++/* ...output buffer reception */
++#define XF_FILL_THIS_BUFFER		__XF_OPCODE(0, 1, 9)
++
++/* ...flush specific port */
++#define XF_FLUSH			__XF_OPCODE(0, 0, 10)
++
++/* ...start component operation */
++#define XF_START			__XF_OPCODE(0, 0, 11)
++
++/* ...stop component operation */
++#define XF_STOP				__XF_OPCODE(0, 0, 12)
++
++/* ...pause component operation */
++#define XF_PAUSE			__XF_OPCODE(0, 0, 13)
++
++/* ...resume component operation */
++#define XF_RESUME			__XF_OPCODE(0, 0, 14)
++
++/* ...total amount of supported decoder commands */
++#define __XF_OP_NUM			(15)
++
++/*************************************************
++ * Renderer - specific configuration parameters
++ * **********************************************/
++
++enum xa_config_param_renderer {
++	XA_RDR_CONFIG_PARAM_STATE		= 0,
++	XA_RDR_CONFIG_PARAM_PCM_WIDTH		= 1,
++	XA_RDR_CONFIG_PARAM_CHANNELS		= 2,
++	XA_RDR_CONFIG_PARAM_SAMPLE_RATE		= 3,
++	XA_RDR_CONFIG_PARAM_FRAME_SIZE		= 4,
++	XA_RDR_CONFIG_PARAM_OUTPUT1		= 5,
++	XA_RDR_CONFIG_PARAM_DMACHANNEL1		= 6,
++	XA_RDR_CONFIG_PARAM_OUTPUT2		= 7,
++	XA_RDR_CONFIG_PARAM_DMACHANNEL2		= 8,
++	XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE	= 9,
++	XA_RDR_CONFIG_PARAM_VOLUME_RATE		= 10,
++	XA_RDR_CONFIG_PARAM_OUT_CHANNELS	= 11,
++	XA_RDR_CONFIG_PARAM_MIX_CONTROL		= 12,
++	XA_RDR_CONFIG_PARAM_NUM			= 13
++};
++
++/*************************************************
++ * Capture - specific configuration parameters
++ * **********************************************/
++
++enum xa_config_param_capture {
++	XA_CAP_CONFIG_PARAM_CB			= 0,
++	XA_CAP_CONFIG_PARAM_STATE		= 1,
++	XA_CAP_CONFIG_PARAM_PCM_WIDTH		= 2,
++	XA_CAP_CONFIG_PARAM_CHANNELS		= 3,
++	XA_CAP_CONFIG_PARAM_SAMPLE_RATE		= 4,
++	XA_CAP_CONFIG_PARAM_FRAME_SIZE		= 5,
++	XA_CAP_CONFIG_PARAM_INPUT1		= 6,
++	XA_CAP_CONFIG_PARAM_DMACHANNEL1		= 7,
++	XA_CAP_CONFIG_PARAM_INPUT2		= 8,
++	XA_CAP_CONFIG_PARAM_DMACHANNEL2		= 9,
++	XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE	= 10,
++	XA_CAP_CONFIG_PARAM_VOLUME_RATE		= 11,
++	XA_CAP_CONFIG_PARAM_NUM			= 12
++};
++
++/*************************************************
++ * Equalizer - specific configuration parameters
++ * **********************************************/
++
++enum xa_rel_eqz_filter_type {
++	XA_REL_EQZ_TYPE_THROUGH = 0,
++	XA_REL_EQZ_TYPE_PEAK	= 1,
++	XA_REL_EQZ_TYPE_BASS	= 2,
++	XA_REL_EQZ_TYPE_TREBLE	= 3
++};
++
++enum xa_rel_eqz_type {
++	XA_REL_EQZ_TYPE_PARAMETRIC	= 0,
++	XA_REL_EQZ_TYPE_GRAPHIC		= 1
++};
++
++/*****************************************************************************/
++/* Additional subcommand indices */
++/*****************************************************************************/
++
++enum xa_add_cmd_type_generic {
++	/* XA_API_CMD_SET_CONFIG_PARAM indices */
++	XA_EQZ_CONFIG_PARAM_COEF_FS			= 0x0000,
++	XA_EQZ_CONFIG_PARAM_PCM_WIDTH			= 0x0001,
++	XA_EQZ_CONFIG_PARAM_CH				= 0x0002,
++	XA_EQZ_CONFIG_PARAM_EQZ_TYPE			= 0x0003,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC	= 0x0010,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_FC	= 0x0011,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_FC	= 0x0012,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_FC	= 0x0013,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_FC	= 0x0014,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_FC	= 0x0015,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_FC	= 0x0016,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_FC	= 0x0017,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_FC	= 0x0018,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE	= 0x0020,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_TYPE	= 0x0021,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_TYPE	= 0x0022,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_TYPE	= 0x0023,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_TYPE	= 0x0024,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_TYPE	= 0x0025,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_TYPE	= 0x0026,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_TYPE	= 0x0027,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_TYPE	= 0x0028,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW	= 0x0030,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_BW	= 0x0031,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_BW	= 0x0032,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_BW	= 0x0033,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_BW	= 0x0034,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_BW	= 0x0035,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_BW	= 0x0036,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_BW	= 0x0037,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_BW	= 0x0038,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA	= 0x0040,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_GA	= 0x0041,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_GA	= 0x0042,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_GA	= 0x0043,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_GA	= 0x0044,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_GA	= 0x0045,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_GA	= 0x0046,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_GA	= 0x0047,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_GA	= 0x0048,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA	= 0x0050,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_BA	= 0x0051,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_BA	= 0x0052,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_BA	= 0x0053,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_BA	= 0x0054,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_BA	= 0x0055,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_BA	= 0x0056,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_BA	= 0x0057,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_BA	= 0x0058,
++
++	XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA	= 0x0060,
++	XA_EQZ_CONFIG_PARAM_BAND_1_GCOEF_GA	= 0x0061,
++	XA_EQZ_CONFIG_PARAM_BAND_2_GCOEF_GA	= 0x0062,
++	XA_EQZ_CONFIG_PARAM_BAND_3_GCOEF_GA	= 0x0063,
++	XA_EQZ_CONFIG_PARAM_BAND_4_GCOEF_GA	= 0x0064
++};
++
++/* ...tdm-renderer-specific configuration parameters */
++enum xa_config_param_tdm_renderer {
++	XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH	= 0,
++	XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE	= 1,
++	XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE  = 2,
++	XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE	= 3,
++	XA_TDM_RDR_CONFIG_PARAM_OUTPUT1		= 4,
++	XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1	= 5,
++	XA_TDM_RDR_CONFIG_PARAM_OUTPUT2		= 6,
++	XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2	= 7,
++	XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE = 8,
++	XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE	= 9
++};
++
++enum xa_rel_tdm_renderer_channel_mode {
++	XA_TDM_RDR_CHANNEL_MODE_2X4 = 0, /**< 4 stereo TDM data	   */
++	XA_TDM_RDR_CHANNEL_MODE_1X8 = 1, /**< 1 eight-channel TDM data*/
++	/**< 1 six-channels plus 1 two-channels TDM data */
++	XA_TDM_RDR_CHANNEL_MODE_6_2 = 2,
++	XA_TDM_RDR_CHANNEL_MODE_2X3 = 3, /**< 3 stereo TDM data	   */
++	XA_TDM_RDR_CHANNEL_MODE_1X6 = 4	 /**< 1 six-channel TDM data  */
++};
++
++/* ...TDM Capture-specific configuration parameters */
++enum xa_config_param_tdm_capture {
++	XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH	= 0,
++	XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE	= 1,
++	XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE  = 2,
++	XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE	= 3,
++	XA_TDM_CAP_CONFIG_PARAM_INPUT1		= 4,
++	XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1	= 5,
++	XA_TDM_CAP_CONFIG_PARAM_INPUT2		= 6,
++	XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2	= 7,
++	XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE = 8,
++	XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE	= 9
++};
++
++enum xa_rel_tdm_capture_channel_mode {
++	XA_TDM_CAP_CHANNEL_MODE_2X4 = 0, /**< 4 stereo TDM data  */
++	XA_TDM_CAP_CHANNEL_MODE_1X8 = 1, /**< 1 eight-channel TDM data*/
++	/**< 1 six-channels plus 1 two-channels TDM data */
++	XA_TDM_CAP_CHANNEL_MODE_6_2 = 2,
++	XA_TDM_CAP_CHANNEL_MODE_2X3 = 3, /**< 3 stereo TDM data	   */
++	XA_TDM_CAP_CHANNEL_MODE_1X6 = 4	 /**< 1 six-channel TDM data  */
++};
++
++/*****************************************************************************/
++/* HW supported	 */
++/*****************************************************************************/
++/* ...SSI modules supported by HW */
++enum ssi_module {
++	SSI00		= 0,
++	SSI01		= 1,
++	SSI02		= 2,
++	SSI03		= 3,
++	SSI04		= 4,
++	SSI05		= 5,
++	SSI06		= 6,
++	SSI07		= 7,
++	SSI10		= 10,
++	SSI11		= 11,
++	SSI12		= 12,
++	SSI13		= 13,
++	SSI14		= 14,
++	SSI15		= 15,
++	SSI16		= 16,
++	SSI17		= 17,
++	SSI20		= 20,
++	SSI21		= 21,
++	SSI22		= 22,
++	SSI23		= 23,
++	SSI24		= 24,
++	SSI25		= 25,
++	SSI26		= 26,
++	SSI27		= 27,
++	SSI30		= 30,
++	SSI31		= 31,
++	SSI32		= 32,
++	SSI33		= 33,
++	SSI34		= 34,
++	SSI35		= 35,
++	SSI36		= 36,
++	SSI37		= 37,
++	SSI40		= 40,
++	SSI41		= 41,
++	SSI42		= 42,
++	SSI43		= 43,
++	SSI44		= 44,
++	SSI45		= 45,
++	SSI46		= 46,
++	SSI47		= 47,
++	SSI5		= 50,
++	SSI6		= 60,
++	SSI7		= 70,
++	SSI8		= 80,
++	SSI90		= 90,
++	SSI91		= 91,
++	SSI92		= 92,
++	SSI93		= 93,
++	SSI94		= 94,
++	SSI95		= 95,
++	SSI96		= 96,
++	SSI97		= 97
++};
++
++/* ...SRC modules supported by HW */
++enum src_module {
++	SRC0	= 110,			  /* SRC0 */
++	SRC1	= 111,			  /* SRC1 */
++	SRC2	= 112,			  /* SRC2 */
++	SRC3	= 113,			  /* SRC3 */
++	SRC4	= 114,			  /* SRC4 */
++	SRC5	= 115,			  /* SRC5 */
++	SRC6	= 116,			  /* SRC6 */
++	SRC7	= 117,			  /* SRC7 */
++	SRC8	= 118,			  /* SRC8 */
++	SRC9	= 119,			  /* SRC9 */
++	SRCMAX  = 120			   /* Maximum number of SRC modules */
++};
++
++/* ...PDMA supported by HW */
++enum {
++	PDMA_CH00 = 0,
++	PDMA_CH01 = 1,
++	PDMA_CH02 = 2,
++	PDMA_CH03 = 3,
++	PDMA_CH04 = 4,
++	PDMA_CH05 = 5,
++	PDMA_CH06 = 6,
++	PDMA_CH07 = 7,
++	PDMA_CH08 = 8,
++	PDMA_CH09 = 9,
++	PDMA_CH10 = 10,
++	PDMA_CH11 = 11,
++	PDMA_CH12 = 12,
++	PDMA_CH13 = 13,
++	PDMA_CH14 = 14,
++	PDMA_CH15 = 15,
++	PDMA_CH16 = 16,
++	PDMA_CH17 = 17,
++	PDMA_CH18 = 18,
++	PDMA_CH19 = 19,
++	PDMA_CH20 = 20,
++	PDMA_CH21 = 21,
++	PDMA_CH22 = 22,
++	PDMA_CH23 = 23,
++	PDMA_CH24 = 24,
++	PDMA_CH25 = 25,
++	PDMA_CH26 = 26,
++	PDMA_CH27 = 27,
++	PDMA_CH28 = 28,
++	PDMA_CHMAX = 29
++};
++
++/* ...DMAC supported by HW */
++enum {
++	ADMAC_CH00 = PDMA_CHMAX + 0,
++	ADMAC_CH01 = PDMA_CHMAX + 1,
++	ADMAC_CH02 = PDMA_CHMAX + 2,
++	ADMAC_CH03 = PDMA_CHMAX + 3,
++	ADMAC_CH04 = PDMA_CHMAX + 4,
++	ADMAC_CH05 = PDMA_CHMAX + 5,
++	ADMAC_CH06 = PDMA_CHMAX + 6,
++	ADMAC_CH07 = PDMA_CHMAX + 7,
++	ADMAC_CH08 = PDMA_CHMAX + 8,
++	ADMAC_CH09 = PDMA_CHMAX + 9,
++	ADMAC_CH10 = PDMA_CHMAX + 10,
++	ADMAC_CH11 = PDMA_CHMAX + 11,
++	ADMAC_CH12 = PDMA_CHMAX + 12,
++	ADMAC_CH13 = PDMA_CHMAX + 13,
++	ADMAC_CH14 = PDMA_CHMAX + 14,
++	ADMAC_CH15 = PDMA_CHMAX + 15,
++	ADMAC_CH16 = PDMA_CHMAX + 16,
++	ADMAC_CH17 = PDMA_CHMAX + 17,
++	ADMAC_CH18 = PDMA_CHMAX + 18,
++	ADMAC_CH19 = PDMA_CHMAX + 19,
++	ADMAC_CH20 = PDMA_CHMAX + 20,
++	ADMAC_CH21 = PDMA_CHMAX + 21,
++	ADMAC_CH22 = PDMA_CHMAX + 22,
++	ADMAC_CH23 = PDMA_CHMAX + 23,
++	ADMAC_CH24 = PDMA_CHMAX + 24,
++	ADMAC_CH25 = PDMA_CHMAX + 25,
++	ADMAC_CH26 = PDMA_CHMAX + 26,
++	ADMAC_CH27 = PDMA_CHMAX + 27,
++	ADMAC_CH28 = PDMA_CHMAX + 28,
++	ADMAC_CH29 = PDMA_CHMAX + 29,
++	ADMAC_CH30 = PDMA_CHMAX + 30,
++	ADMAC_CH31 = PDMA_CHMAX + 31,
++	ADMAC_CHMAX = PDMA_CHMAX + 32
++};
++
++#endif
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0003-ADSP-add-build-for-ADSP-sound-driver.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0003-ADSP-add-build-for-ADSP-sound-driver.patch
new file mode 100644
index 00000000..ecab4120
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0003-ADSP-add-build-for-ADSP-sound-driver.patch
@@ -0,0 +1,35 @@
+From 3ae5cb9feda031f660becc94f5496d5ee9b90e22 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Mon, 15 Oct 2018 17:57:56 +0700
+Subject: [PATCH 3/6] ADSP: add build for ADSP sound driver
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+---
+ sound/soc/Kconfig  | 1 +
+ sound/soc/Makefile | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
+index c0abad2067e1..f5f6abbd6e14 100644
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -71,6 +71,7 @@ source "sound/soc/txx9/Kconfig"
+ source "sound/soc/ux500/Kconfig"
+ source "sound/soc/xtensa/Kconfig"
+ source "sound/soc/zte/Kconfig"
++source "sound/soc/adsp/Kconfig"
+ 
+ # Supported codecs
+ source "sound/soc/codecs/Kconfig"
+diff --git a/sound/soc/Makefile b/sound/soc/Makefile
+index bf8c1e2ce0bf..6e77abba2b01 100644
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -52,3 +52,4 @@ obj-$(CONFIG_SND_SOC)	+= txx9/
+ obj-$(CONFIG_SND_SOC)	+= ux500/
+ obj-$(CONFIG_SND_SOC)	+= xtensa/
+ obj-$(CONFIG_SND_SOC)	+= zte/
++obj-$(CONFIG_SND_SOC)	+= adsp/
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch
new file mode 100644
index 00000000..6d95d65f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch
@@ -0,0 +1,185 @@
+From 825517f3f8ebe551d297db16e4582c0eae646f05 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Wed, 31 Oct 2018 16:12:36 +0700
+Subject: [PATCH 4/6] ADSP: integrate ADSP sound for H3, M3, M3N board
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+[takeshi.kihara.df: fix W=1 dtc warning]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ arch/arm64/boot/dts/renesas/r8a7795.dtsi      |  5 ++
+ arch/arm64/boot/dts/renesas/r8a7796.dtsi      |  5 ++
+ arch/arm64/boot/dts/renesas/r8a77965.dtsi     |  5 ++
+ .../boot/dts/renesas/salvator-common.dtsi     | 84 +++++++++++++++++--
+ 4 files changed, 94 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+index 1896e5250dff..8dfda0fda91c 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+@@ -793,6 +793,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+index c00d1da64198..726c0d07fe59 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+@@ -798,6 +798,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+index 454a67b132f4..799b005ade92 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+@@ -227,6 +227,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+index 922b9cc4797c..2c1d49c4bcaa 100644
+--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
++++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+@@ -153,11 +153,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture",
++				"ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -419,8 +435,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -731,6 +766,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -769,7 +843,7 @@
+ 		rsnd_port0: port@0 {
+ 			reg = <0>;
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch
new file mode 100644
index 00000000..34b32d8f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch
@@ -0,0 +1,272 @@
+From 455f26d0de1cf6eaeb0aa5b58725e3e34d8d34bd Mon Sep 17 00:00:00 2001
+From: Nguyen Dang <nguyen.dang.wh@rvc.renesas.com>
+Date: Tue, 6 Nov 2018 11:36:15 +0700
+Subject: [PATCH 5/6] ADSP: integrate ADSP sound for E3 board
+
+Signed-off-by: Nguyen Dang <nguyen.dang.wh@renesas.com>
+[takeshi.kihara.df: fix W=1 dtc warning]
+[takeshi.kihara.df: support for dt file separation by E3 ES1.0 SoC]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 84 +++++++++++++++++--
+ .../boot/dts/renesas/r8a77990-es10-ebisu.dts  | 84 +++++++++++++++++--
+ arch/arm64/boot/dts/renesas/r8a77990.dtsi     |  5 ++
+ 3 files changed, 163 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+index 26081a6e1866..20fdb4085d87 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
++++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+@@ -221,11 +221,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture",   "ak4613 Capture",
++				"ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -501,8 +517,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -702,6 +737,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -737,7 +811,7 @@
+ 	ports {
+ 		rsnd_port0: port@0 {
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
+index 087d5533f3db..61e18309c4a4 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
++++ b/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
+@@ -221,11 +221,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture",   "ak4613 Capture",
++				"ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -501,8 +517,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -702,6 +737,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -737,7 +811,7 @@
+ 	ports {
+ 		rsnd_port0: port@0 {
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+index bd4d71e2b93e..845399adcbdb 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+@@ -181,6 +181,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch
new file mode 100644
index 00000000..3f601b64
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch
@@ -0,0 +1,101 @@
+From acd7751ebcce90a442588f37fc6731990b5e09ea Mon Sep 17 00:00:00 2001
+From: Nguyen Dang <nguyen.dang.wh@renesas.com>
+Date: Tue, 6 Nov 2018 11:46:25 +0700
+Subject: [PATCH v2 6/6] ADSP: remove HDMI support from rcar-sound
+
+Signed-off-by: Nguyen Dang <nguyen.dang.wh@renesas.com>
+[takeshi.kihara.df: support for dt file separation by M3v3.0 SoC]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts       | 6 ------
+ arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts      | 6 ------
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts       | 5 -----
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts | 5 -----
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts      | 5 -----
+ 5 files changed, 27 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+index 6928afbd8e06..b268afd7df85 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+@@ -104,12 +104,6 @@
+ 	status = "okay";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1	/* HDMI0  */
+-		&rsnd_port2>;	/* HDMI1  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+index 498f78875dbd..b6ec3036e9fd 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+@@ -114,12 +114,6 @@
+ 	status = "okay";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1	/* HDMI0  */
+-		&rsnd_port2>;	/* HDMI1  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+index cf92aa3939e3..4faf935c4a32 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+@@ -88,11 +88,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
+index 664dc9250bbb..13960f69b2f7 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
+@@ -96,11 +96,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+index 7d39dc96ac8a..1cd6f0463361 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+@@ -88,11 +88,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+-- 
+2.21.0
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.14.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.14.bb
new file mode 100644
index 00000000..203ea19c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.14.bb
@@ -0,0 +1,38 @@
+require recipes-kernel/linux-libc-headers/linux-libc-headers.inc
+require include/iccom-control.inc
+require include/adsp-control.inc
+
+RENESAS_BSP_URL = " \
+    git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git"
+BRANCH = "v4.14.75-ltsi/rcar-3.9.6"
+SRCREV = "1d76a004d3a19367669b861559c1fbbf546b3065"
+
+SRC_URI = "${RENESAS_BSP_URL};branch=${BRANCH}"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+# Enable RPMSG_VIRTIO depend on ICCOM
+SRC_URI_append = " \
+    ${@oe.utils.conditional("USE_ICCOM", "1", " file://0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch", "", d)} \
+"
+
+# Add ADSP ALSA driver
+SUPPORT_ADSP_ASOC = " \
+    file://0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch \
+    file://0002-ADSP-add-ADSP-sound-driver-source.patch \
+    file://0003-ADSP-add-build-for-ADSP-sound-driver.patch \
+    file://0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch \
+    file://0005-ADSP-integrate-ADSP-sound-for-E3-board.patch \
+    file://0006-ADSP-remove-HDMI-support-from-rcar-sound.patch \
+"
+
+SRC_URI_append = " \
+    ${@oe.utils.conditional("USE_ADSP", "1", "${SUPPORT_ADSP_ASOC}", "", d)} \
+"
+
+S = "${WORKDIR}/git"
+
+# W/A Fix build issue with Linux v4.14
+SRC_URI_append = " \
+    file://0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch
new file mode 100644
index 00000000..765053fa
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch
@@ -0,0 +1,32 @@
+From 5f378e5db591a4a119b6cface6037cbded240506 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Thu, 25 Oct 2018 13:25:10 +0700
+Subject: [PATCH 1/6] ADSP: add document for compatible string
+ "renesas,rcar_adsp_sound_gen3"
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+---
+ .../devicetree/bindings/sound/renesas,adsp.txt        | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/sound/renesas,adsp.txt
+
+diff --git a/Documentation/devicetree/bindings/sound/renesas,adsp.txt b/Documentation/devicetree/bindings/sound/renesas,adsp.txt
+new file mode 100644
+index 000000000000..b529bcadea82
+--- /dev/null
++++ b/Documentation/devicetree/bindings/sound/renesas,adsp.txt
+@@ -0,0 +1,11 @@
++Renesas ADSP sound driver
++
++Required properties:
++- compatible			: "renesas,rcar_adsp_sound_gen3"
++
++Example:
++
++rcar_adsp_sound: adsp_sound@0 {
++     compatible =  "renesas,rcar_adsp_sound_gen3";
++     status = "disabled";
++};
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-Revert-ASoC-rsnd-ssi-wait-maximum-5ms-for-status-che.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-Revert-ASoC-rsnd-ssi-wait-maximum-5ms-for-status-che.patch
new file mode 100644
index 00000000..521631b0
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-Revert-ASoC-rsnd-ssi-wait-maximum-5ms-for-status-che.patch
@@ -0,0 +1,34 @@
+From a0e2d5ab917de4d8fce6bed4a5c87b729be30ca7 Mon Sep 17 00:00:00 2001
+From: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
+Date: Sat, 1 Dec 2018 23:48:49 +1100
+Subject: [PATCH] Revert: ASoC: rsnd: ssi: wait maximum 5ms for status check
+
+By waiting only a maximum of 5ms, we break the Renesas
+ADSP firmware's ability to access the SSI directly.
+This functionality is currently used by the Fiberdyne DSP.
+
+Since we shouldn't use udelay() for 50us
+(linux/Documentation/timers/timers-howto.txt), we instead increase
+the loop length to 1024*10 (5ms*10=50ms).
+
+Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
+---
+ sound/soc/sh/rcar/ssi.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
+index 9538f76f8e20..0395e33bebdd 100644
+--- a/sound/soc/sh/rcar/ssi.c
++++ b/sound/soc/sh/rcar/ssi.c
+@@ -166,7 +166,7 @@ static void rsnd_ssi_status_check(struct rsnd_mod *mod,
+ 	u32 status;
+ 	int i;
+ 
+-	for (i = 0; i < 1024; i++) {
++	for (i = 0; i < (10*1024); i++) {
+ 		status = rsnd_ssi_status_get(mod);
+ 		if (status & bit)
+ 			return;
+-- 
+2.17.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch
new file mode 100644
index 00000000..9c38a327
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch
@@ -0,0 +1,61 @@
+From a39cada70268aadff7153e4f782bcd90a5c69d07 Mon Sep 17 00:00:00 2001
+From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+Date: Mon, 4 Dec 2017 10:56:46 +0100
+Subject: [PATCH] arm64/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT
+ program type
+
+Correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type
+by exporting the user_pt_regs structure instead of the pt_regs structure
+that is in-kernel only.
+
+Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
+Acked-by: Alexei Starovoitov <ast@kernel.org>
+Cc: Will Deacon <will.deacon@arm.com>
+Cc: Mark Rutland <mark.rutland@arm.com>
+Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+---
+ arch/arm64/include/asm/perf_event.h          | 2 ++
+ arch/arm64/include/uapi/asm/bpf_perf_event.h | 9 +++++++++
+ 2 files changed, 11 insertions(+)
+ create mode 100644 arch/arm64/include/uapi/asm/bpf_perf_event.h
+
+diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
+index 8d5cbec..f9ccc36 100644
+--- a/arch/arm64/include/asm/perf_event.h
++++ b/arch/arm64/include/asm/perf_event.h
+@@ -18,6 +18,7 @@
+ #define __ASM_PERF_EVENT_H
+ 
+ #include <asm/stack_pointer.h>
++#include <asm/ptrace.h>
+ 
+ #define	ARMV8_PMU_MAX_COUNTERS	32
+ #define	ARMV8_PMU_COUNTER_MASK	(ARMV8_PMU_MAX_COUNTERS - 1)
+@@ -79,6 +80,7 @@ struct pt_regs;
+ extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+ extern unsigned long perf_misc_flags(struct pt_regs *regs);
+ #define perf_misc_flags(regs)	perf_misc_flags(regs)
++#define perf_arch_bpf_user_pt_regs(regs) &regs->user_regs
+ #endif
+ 
+ #define perf_arch_fetch_caller_regs(regs, __ip) { \
+diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h
+new file mode 100644
+index 0000000..b551b74
+--- /dev/null
++++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h
+@@ -0,0 +1,9 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
++#define _UAPI__ASM_BPF_PERF_EVENT_H__
++
++#include <asm/ptrace.h>
++
++typedef struct user_pt_regs bpf_user_pt_regs_t;
++
++#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch
new file mode 100644
index 00000000..8c0a2af7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch
@@ -0,0 +1,27 @@
+From 1cdbf4ed4717eefa2b6237c1e63e351b62990522 Mon Sep 17 00:00:00 2001
+From: Dien Pham <dien.pham.ry@renesas.com>
+Date: Fri, 23 Feb 2018 18:29:32 +0700
+Subject: [PATCH] rpmsg: Add message to be able to configure RPMSG_VIRTIO from
+ defconfig
+
+Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
+---
+ drivers/rpmsg/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
+index 0fe6eac..5b1e61b 100644
+--- a/drivers/rpmsg/Kconfig
++++ b/drivers/rpmsg/Kconfig
+@@ -47,7 +47,7 @@ config RPMSG_QCOM_SMD
+ 	  platforms.
+ 
+ config RPMSG_VIRTIO
+-	tristate
++	tristate "Enable remote processor message and virtual I/O configure"
+ 	select RPMSG
+ 	select VIRTIO
+ 
+-- 
+1.9.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-ADSP-add-ADSP-sound-driver-source.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-ADSP-add-ADSP-sound-driver-source.patch
new file mode 100644
index 00000000..14719fba
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-ADSP-add-ADSP-sound-driver-source.patch
@@ -0,0 +1,7204 @@
+From 829c17a722611c39cda6926f0fac46fa586c70ef Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Mon, 17 Jun 2019 17:04:02 +0700
+Subject: [PATCH 2/6] ADSP: add ADSP sound driver source
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+
+diff --git a/include/adsp_drv/xf-adsp-drv-ext.h b/include/adsp_drv/xf-adsp-drv-ext.h
+new file mode 100644
+index 0000000..6c3dbc0
+--- /dev/null
++++ b/include/adsp_drv/xf-adsp-drv-ext.h
+@@ -0,0 +1,58 @@
++/*****************************************************************************
++ * \file       xf-adsp-driver-ext.h
++ * \brief      Header file for ADSP driver extension part
++ * \addtogroup ADSP Driver
++ ******************************************************************************
++ * \date       Oct. 21, 2017
++ * \author     Renesas Electronics Corporation
++ ******************************************************************************
++ * \par        Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_DRV_EXT_H
++#define __XF_ADSP_DRV_EXT_H
++
++/***********************************************************
++ * Extension client APIs
++ * ********************************************************/
++
++struct xf_adsp_base_cmd {
++	/* register new client for ADSP base control */
++	int (*client_register)(void **private_data);
++	/* unregister client */
++	int (*client_unregister)(void *private_data);
++	/* get data from proxy */
++	int (*recv)(void *private_data, void *buf);
++	/* send data to proxy */
++	int (*send)(void *private_data, void *buf);
++	/* wait the valid message in the response queue */
++	int (*poll)(void *private_data, int *condition);
++};
++
++/* create ADSP base control data */
++int xf_adsp_base_create(struct xf_adsp_base_cmd *cmd);
++
++/* destroy ADSP base control data */
++int xf_adsp_base_destroy(void);
++
++#endif
+diff --git a/sound/soc/adsp/Kconfig b/sound/soc/adsp/Kconfig
+new file mode 100644
+index 0000000..605261f
+--- /dev/null
++++ b/sound/soc/adsp/Kconfig
+@@ -0,0 +1,14 @@
++## SoC for ADSP driver configuration
++menu "ASoC ADSP driver"
++
++config SND_SOC_ADSP
++    tristate "SoC Audio for R-Car ADSP"
++    select SND_SIMPLE_CARD
++    select SND_SIMPLE_SCU_CARD
++    select SND_AUDIO_GRAPH_CARD
++    select SND_AUDIO_GRAPH_SCU_CARD
++    default y
++    help
++      This option enables ALSA ADSP sound supports ADSP module
++
++endmenu
+diff --git a/sound/soc/adsp/Makefile b/sound/soc/adsp/Makefile
+new file mode 100644
+index 0000000..8277fdb
+--- /dev/null
++++ b/sound/soc/adsp/Makefile
+@@ -0,0 +1,3 @@
++## Makefile for SoC ADSP driver
++snd-soc-adsp-objs	:= xf-adsp-alsa.o xf-adsp-base.o
++obj-$(CONFIG_SND_SOC_ADSP)	+= snd-soc-adsp.o
+diff --git a/sound/soc/adsp/xf-adsp-alsa.c b/sound/soc/adsp/xf-adsp-alsa.c
+new file mode 100644
+index 0000000..493ff84
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-alsa.c
+@@ -0,0 +1,3939 @@
++/** ***************************************************************************
++ * \file	 xf-adsp-alsa.c
++ * \brief	 Source file for ADSP ALSA Driver
++ * \addtogroup	 ADSP Driver
++ ******************************************************************************
++ * \date	 Oct. 21, 2017
++ * \author	 Renesas Electronics Corporation
++ ******************************************************************************
++ * \par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the "Software"),
++ * to deal in the Software without restriction, including without limitation
++ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
++ * and/or sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
++ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++ * DEALINGS IN THE SOFTWARE.
++ *****************************************************************************/
++
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/sched/signal.h>
++#include <linux/delay.h>
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/pcm-indirect.h>
++#include <linux/time.h>
++
++#include "xf-adsp-base.h"
++
++/* Name of Volume control for playback */
++#define PLAYBACK_VOLUME_CTR_NAME	"PlaybackVolume"
++
++/* Name of Volume control for capture */
++#define CAPTURE_VOLUME_CTR_NAME		"CaptureVolume"
++
++/* Name of Sample Rate control for playback */
++#define PLAYBACK_OUT_RATE_CTR_NAME	"PlaybackOutRate"
++
++/* Name of Output Channel control for playback */
++#define PLAYBACK_OUT_CHANNEL_CTR_NAME	"PlaybackOutChannel"
++
++/* Name of Sample Rate control for capture */
++#define CAPTURE_IN_RATE_CTR_NAME	"CaptureInRate"
++
++/* Name of Equalizer parameters control for playback */
++#define PLAYBACK_EQZ_CTR_NAME		"PlaybackEQZControl"
++
++/* Name of Equalizer parameters control for capture */
++#define CAPTURE_EQZ_CTR_NAME		"CaptureEQZControl"
++
++/* Name of Equalizer Switch control for playback */
++#define PLAYBACK_EQZ_SWITCH_CTR_NAME	"PlaybackEQZSwitch"
++
++/* Name of Equalizer Switch control for capture */
++#define CAPTURE_EQZ_SWITCH_CTR_NAME	"CaptureEQZSwitch"
++
++/* Name of Volume control for TDM playback */
++#define TDM_PLAYBACK_VOLUME_CTR_NAME	"TDMPlaybackVolume"
++
++/* Name of Volume control for TDM capture */
++#define TDM_CAPTURE_VOLUME_CTR_NAME	"TDMCaptureVolume"
++
++/* Name of Sample Rate control for TDM playback */
++#define TDM_PLAYBACK_OUT_RATE_CTR_NAME	"TDMPlaybackOutRate"
++
++/* Name of Sample Rate control for TDM capture */
++#define TDM_CAPTURE_IN_RATE_CTR_NAME	"TDMCaptureInRate"
++
++/* Prefix of Playback control name */
++#define PREFIX_OF_PLAYBACK_CTR_NAME	PLAYBACK_VOLUME_CTR_NAME[0]
++
++/* Prefix of Capture control name */
++#define PREFIX_OF_CAPTURE_CTR_NAME	CAPTURE_VOLUME_CTR_NAME[0]
++
++/* Prefix of TDM control name */
++#define PREFIX_OF_TDM_CTR_NAME		TDM_PLAYBACK_VOLUME_CTR_NAME[0]
++
++/* Prefix of TDM playback */
++#define TDM_PLAYBACK			TDM_PLAYBACK_VOLUME_CTR_NAME[3]
++
++/* Prefix of TDM record */
++#define TDM_CAPTURE			TDM_CAPTURE_VOLUME_CTR_NAME[3]
++
++/* Number of control for playback & capture */
++#define RDR_CONTROL_NUM		(9)
++
++/* Number of controls for TDM */
++#define TDM_CONTROL_NUM		(4)
++
++/* Indicate playback stream */
++#define DIRECT_PLAYBACK		(0)
++
++/* Indicate capture stream */
++#define DIRECT_CAPTURE		(1)
++
++/* Indicate stream number */
++#define DIRECT_NUM		(2)
++
++/* Supported frame size for playback/record function in driver */
++#define FRAME_SIZE		(1024)
++
++/* Supported frame size for TDM playback/record function in driver */
++#define TDM_FRAME_SIZE		(1024)
++
++/* Supported sample rate in driver */
++#define SND_ADSP_SAMPLE_RATES	(SNDRV_PCM_RATE_32000 | \
++				 SNDRV_PCM_RATE_44100 | \
++				 SNDRV_PCM_RATE_48000)
++
++/* Supported PCM width in driver */
++#define SND_ADSP_PCM_WIDTHS	(SNDRV_PCM_FMTBIT_S16_LE | \
++				 SNDRV_PCM_FMTBIT_S24_LE)
++
++/* Macro to control DAI index */
++/* DAI 0 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX0		(0)
++
++/* DAI 1 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX1		(1)
++
++/* DAI 2 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX2		(2)
++
++/* DAI 3 index for playback/record functions of stereo/mono formats */
++#define RDR_DAI_IDX3		(3)
++
++/* DAI 4 index for playback/record functions of TDM formats */
++#define TDM_DAI_IDX		(4)
++
++/* Maximum number of DAI supported by driver */
++#define MAX_DAI_IDX		(5)
++
++/* Renderer/Capture software information */
++/* Minimum channel number supported */
++#define MIN_CHANNEL		(1)
++
++/* Maximum channel number supported */
++#define MAX_CHANNEL		(2)
++
++/* Minimum buffer size in byte */
++#define MIN_BUF_SIZE		(FRAME_SIZE * MIN_CHANNEL * 2)
++
++/* Maximum buffer size in byte */
++#define MAX_BUF_SIZE		(FRAME_SIZE * MAX_CHANNEL * 4)
++
++/* Minimum numbers of period in the buffer */
++#define MIN_PERIOD		(1)
++
++/* Maximum numbers of period in the buffer */
++#define MAX_PERIOD		(4)
++
++/* Maximun numbers of bytes in ALSA buffer */
++#define MAX_BUFFER_BYTES	(MAX_PERIOD * MAX_BUF_SIZE)
++
++/* TDM software information */
++/*< Minimum channel number supported in TDM plugin */
++#define TDM_MIN_CHANNEL		(6)
++
++/* Maximum channel number supported in TDM plugin */
++#define TDM_MAX_CHANNEL		(8)
++
++/* Minimum buffer size in byte for TDM format */
++#define TDM_MIN_BUF_SIZE	(TDM_FRAME_SIZE * TDM_MIN_CHANNEL * 2)
++
++/* Maximum buffer size in byte for TDM format */
++#define TDM_MAX_BUF_SIZE	(TDM_FRAME_SIZE * TDM_MAX_CHANNEL * 4)
++
++/* Minimum numbers of period in the buffer for TDM format */
++#define TDM_MIN_PERIOD		(1)
++
++/* Maximum numbers of period in the buffer for TDM format  */
++#define TDM_MAX_PERIOD		(4)
++
++/* Maximum numbers of bytes in ALSA buffer for TDM format */
++#define TDM_MAX_BUFFER_BYTES	(TDM_MAX_PERIOD * TDM_MAX_BUF_SIZE)
++
++/* Volume scale used when user set */
++#define VOLUME_SCALE		(100)
++
++/* Maximum element in Equalizer parameter control */
++#define MAX_EQZ_PARAM_NUMBER	(55)
++
++/* Equalizer control is disabled */
++#define EQZ_OFF			(0)
++
++/* Equalizer control is enabled */
++#define EQZ_ON			(1)
++
++/* Component status */
++/* Handle state is NULL */
++#define XF_HANDLE_NULL		(0)
++
++/* Handle state is CREATED after creating handle successfully */
++#define XF_HANDLE_CREATED	BIT(0)
++
++/* Handle state is READY after finishing handle init */
++#define XF_HANDLE_READY		BIT(1)
++
++/* channels */
++/* Mono stream */
++#define MONAURAL		(1)
++
++/* Stereo stream */
++#define STEREO			(2)
++
++/* define number of bytes in a sample of 24 bits format types */
++/* store 24 bits data in 4 bytes LE */
++#define FMTBIT_S24_LE_BYTES_PER_SAMPLE		(4)
++
++/* store 24 bits data in 3 bytes LE */
++#define FMTBIT_S24_3LE_BYTES_PER_SAMPLE		(3)
++
++/* helper macro to get bytes per sample number */
++#define BYTES_PER_SAMPLE(fmt)   (FMTBIT_##fmt##_BYTES_PER_SAMPLE)
++
++/* check component is created */
++#define COMPONENT_IS_CREATED(n)	(((n & XF_HANDLE_CREATED) != 0) ? TRUE : FALSE)
++
++/* check component is ready */
++#define COMPONENT_IS_READY(n)	(((n & XF_HANDLE_READY) != 0) ? TRUE : FALSE)
++
++/* indicator of stream order */
++#define MIX_UNUSED			(0)
++#define FIRST_RUN			(2)
++#define SECOND_RUN			(1)
++
++/* check MIX usage */
++#define MIX_ENABLED(mix_ctl)	((mix_ctl == SECOND_RUN) ? TRUE : FALSE)
++
++/*******************************************************************
++ * base structures for ADSP ALSA driver
++ * ****************************************************************/
++
++/** \struct snd_adsp_control
++ *  \brief  Structure stores parameters from user
++ */
++struct snd_adsp_control {
++	/* Volume rate for playback/record */
++	int	   vol_rate[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Volume rate for TDM playback/TDM record */
++	int	   tdm_vol_rate[DIRECT_NUM];
++
++	/* Out sample rate with Renderer, in sample rate with Capture */
++	int	   sample_rate[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Out sample rate for TDM Renderer, in sample rate for TDM Capture */
++	int	   tdm_sample_rate[DIRECT_NUM];
++
++	/* Output channel of playback */
++	int	   rdr_out_ch[MAX_DAI_IDX - 1];
++
++	/* Equalizer parameters */
++	struct xf_adsp_equalizer_params eqz_params[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Equalizer switch */
++	int	   eqz_switch[DIRECT_NUM][MAX_DAI_IDX - 1];
++
++	/* Indicator of MIX usage */
++	int	   mix_usage;
++};
++
++/** \struct snd_adsp_base_info
++ *  \brief  Structure stores some base information of a stream
++ */
++struct snd_adsp_base_info {
++	/* high resolution timer data */
++	struct hrtimer			hrtimer;
++
++	/* kernel time value in nanosecond */
++	ktime_t				ktime;
++
++	/* save interrupt state before getting lock */
++	unsigned long			flag;
++
++	/* high resolution timer state */
++	int				hrt_state;
++
++	/* target handle id of ALSA driver */
++	int				handle_id;
++
++	/* data buffer */
++	char				*buffer[XF_BUF_POOL_SIZE];
++
++	/* size of each allocated data buffer */
++	int				buf_bytes;
++
++	/* data index of buffer */
++	int				buf_idx;
++
++	/* queue index of buffer */
++	int				buf_queue;
++
++	/* HW index in bytes */
++	int				hw_idx;
++
++	/* number of bytes in a period */
++	int				period_bytes;
++
++	/* substream runtime object */
++	struct snd_pcm_substream	*substream;
++
++	/* indirect PCM data transfer */
++	struct snd_pcm_indirect		pcm_indirect;
++
++	/* spinlock data */
++	spinlock_t			lock;
++
++	/* runtime error indicator */
++	int				runtime_err;
++};
++
++/** \struct snd_adsp_playback
++ *  \brief  Structure stores data for playback function
++ */
++struct snd_adsp_playback {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* Renderer component data */
++	struct xf_adsp_renderer		*renderer;
++
++	/* Equalizer component data */
++	struct xf_adsp_equalizer	*equalizer;
++
++	/* Renderer component state */
++	int				rdr_state;
++
++	/* Equalizer component state */
++	int				eqz_state;
++};
++
++/** \struct snd_adsp_record
++ *  \brief  Structure stores data for record function
++ */
++struct snd_adsp_record {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* Capture component data */
++	struct xf_adsp_capture		*capture;
++
++	/* Equalizer component data */
++	struct xf_adsp_equalizer	*equalizer;
++
++	/* Capture component state */
++	int				cap_state;
++
++	/* Equalizer component state */
++	int				eqz_state;
++};
++
++/** \struct snd_adsp_tdm_playback
++ *  \brief  Structure stores data for TDM playback function
++ */
++struct snd_adsp_tdm_playback {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* TDM Renderer component data */
++	struct xf_adsp_tdm_renderer	*tdm_renderer;
++
++	/* TDM Renderer component state */
++	int				state;
++};
++
++/** \struct snd_adsp_tdm_record
++ *  \brief  Structure stores data for TDM record function
++ */
++struct snd_adsp_tdm_record {
++	/* base information of stream */
++	struct snd_adsp_base_info	base;
++
++	/* TDM Capture component data */
++	struct xf_adsp_tdm_capture	*tdm_capture;
++
++	/* TDM Capture component state */
++	int				state;
++};
++
++/** \struct snd_adsp_card
++ *  \brief  Structure stores data for ALSA sound card
++ */
++struct snd_adsp_card {
++	/* playback data */
++	struct snd_adsp_playback	*playback[MAX_DAI_IDX - 1];
++
++	/* record data */
++	struct snd_adsp_record		*record[MAX_DAI_IDX - 1];
++
++	/* TDM playback data */
++	struct snd_adsp_tdm_playback	*tdm_playback;
++
++	/* TDM record data */
++	struct snd_adsp_tdm_record	*tdm_record;
++
++	/* Structure contains params information for control */
++	struct snd_adsp_control		ctr_if;
++};
++
++/** HW configuration of ALSA ADSP card for Renderer/Capture */
++static struct snd_pcm_hardware snd_pcm_adsp_hw = {
++	.info		= (SNDRV_PCM_INFO_INTERLEAVED  /* PRQA S 1053 14 */
++			 | SNDRV_PCM_INFO_RESUME
++			 | SNDRV_PCM_INFO_BLOCK_TRANSFER
++			 | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats	   = SND_ADSP_PCM_WIDTHS,
++	.rates		   = SND_ADSP_SAMPLE_RATES,
++	.rate_min	   = 32000,
++	.rate_max	   = 48000,
++	.channels_min	   = MIN_CHANNEL,
++	.channels_max	   = MAX_CHANNEL,
++
++	/* maximum buffer size in bytes */
++	.buffer_bytes_max  = MAX_BUFFER_BYTES,
++
++	/* minimum size of the periods (frame) in bytes */
++	.period_bytes_min  = MIN_BUF_SIZE,
++
++	/* maximum size of the periods (frame) in bytes */
++	.period_bytes_max  = MAX_BUF_SIZE,
++
++	/* minimum periods (frames) in a buffer */
++	.periods_min	   = MIN_PERIOD,
++
++	/* maximum periods (frames) in a buffer */
++	.periods_max	   = MAX_PERIOD,
++};
++
++/* HW configuration of ALSA ADSP card for TDM */
++static struct snd_pcm_hardware snd_pcm_adsp_tdm_hw = {
++	.info		  = (SNDRV_PCM_INFO_INTERLEAVED  /* PRQA S 1053 14 */
++			   | SNDRV_PCM_INFO_RESUME
++			   | SNDRV_PCM_INFO_BLOCK_TRANSFER
++			   | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats	  = SND_ADSP_PCM_WIDTHS,
++	.rates		  = SND_ADSP_SAMPLE_RATES,
++	.rate_min	  = 32000,
++	.rate_max	  = 48000,
++	.channels_min	  = TDM_MIN_CHANNEL,
++	.channels_max	  = TDM_MAX_CHANNEL,
++
++	/* maximum buffer size in bytes */
++	.buffer_bytes_max = TDM_MAX_BUFFER_BYTES,
++
++	/* minimum size of the periods (frame) in bytes */
++	.period_bytes_min = TDM_MIN_BUF_SIZE,
++
++	/* maximum size of the periods (frame) in bytes */
++	.period_bytes_max = TDM_MAX_BUF_SIZE,
++
++	/* minimum periods (frames) in a buffer */
++	.periods_min	  = TDM_MIN_PERIOD,
++
++	/* maximum periods (frames) in a buffer */
++	.periods_max	  = TDM_MAX_PERIOD,
++};
++
++/*******************************************************************
++ * function declaration
++ * ****************************************************************/
++
++static int
++snd_adsp_rdr_empty_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_rdr_fill_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_cap_empty_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_cap_fill_buf_done(void *data, int opcode, int length, char *buffer);
++static int
++snd_adsp_get_dai_id_from_substream(struct snd_pcm_substream *substream);
++static void *
++snd_adsp_get_drvdata_from_substream(struct snd_pcm_substream *substream);
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_substream(struct snd_pcm_substream *substream);
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_hrt(struct hrtimer *hrt);
++static enum hrtimer_restart snd_adsp_hrtimer_func(struct hrtimer *hrt);
++static int snd_adsp_playback_init(struct snd_adsp_playback **data,
++				  int eqz_flag,
++				  struct snd_pcm_substream *substream);
++static int snd_adsp_record_init(struct snd_adsp_record **data,
++				int eqz_flag,
++				struct snd_pcm_substream *substream);
++static int snd_adsp_playback_prepare(struct snd_adsp_playback *playback,
++				     struct snd_pcm_substream *substream);
++static int snd_adsp_record_prepare(struct snd_adsp_record *record,
++				   struct snd_pcm_substream *substream);
++static int snd_adsp_playback_deinit(struct snd_adsp_playback *playback);
++static int snd_adsp_record_deinit(struct snd_adsp_record *record);
++static int snd_adsp_tdm_playback_init(struct snd_adsp_tdm_playback **data,
++				      struct snd_pcm_substream *substream);
++static int snd_adsp_tdm_record_init(struct snd_adsp_tdm_record **data,
++				    struct snd_pcm_substream *substream);
++static int
++snd_adsp_tdm_playback_prepare(struct snd_adsp_tdm_playback *tdm_playback,
++			      struct snd_pcm_substream *substream);
++static int snd_adsp_tdm_record_prepare(struct snd_adsp_tdm_record *tdm_record,
++				       struct snd_pcm_substream *substream);
++static int
++snd_adsp_tdm_playback_deinit(struct snd_adsp_tdm_playback *tdm_playback);
++static int snd_adsp_tdm_record_deinit(struct snd_adsp_tdm_record *tdm_record);
++static int snd_adsp_pcm_open(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_close(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_hw_params(struct snd_pcm_substream *substream,
++				  struct snd_pcm_hw_params *hw_params);
++static int snd_adsp_pcm_hw_free(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_prepare(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_trigger(struct snd_pcm_substream *substream, int idx);
++static snd_pcm_uframes_t
++snd_adsp_pcm_pointer(struct snd_pcm_substream *substream);
++static int snd_adsp_pcm_ack(struct snd_pcm_substream *substream);
++static void snd_adsp_pcm_transfer(struct snd_pcm_substream *substream,
++				  struct snd_pcm_indirect *rec, size_t bytes);
++static int snd_adsp_control_volume_info(struct snd_kcontrol *kcontrol,
++					struct snd_ctl_elem_info *uinfo);
++static int snd_adsp_control_volume_get(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_volume_put(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_eqz_get(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol);
++static int snd_adsp_control_eqz_info(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_info *uinfo);
++static int snd_adsp_control_eqz_put(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_get(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_info(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_info *uinfo);
++static int
++snd_adsp_control_sample_rate_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_sample_rate_info(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_info *uinfo);
++static int
++snd_adsp_control_sample_rate_get(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol);
++static int
++snd_adsp_control_eqz_switch_put(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol);
++static void snd_adsp_get_eqz_params_from_control(
++				struct xf_adsp_equalizer_params *eqz_params,
++				struct xf_adsp_equalizer_params *eqz_ctr_params,
++				bool flag);
++static int snd_adsp_pcm_new(struct snd_soc_pcm_runtime *runtime);
++static int snd_adsp_probe(struct platform_device *pdev);
++static int snd_adsp_remove(struct platform_device *pdev);
++
++/*******************************************************************
++ * callback function of ADSP control interface
++ * ****************************************************************/
++/** **************************************************************************
++ *  \brief	event handler callback to notify error from ADSP
++ *
++ *  \param[in]	data		Pointer to ADSP ALSA sound card
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_event_handler(void *data)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base)
++		base->runtime_err = TRUE;
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 empty buf done callback for playback/TDM playback functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_rdr_empty_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->buf_queue++;
++		base->hw_idx += length; /* increase the DMA buffer index */
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 fill buf done callback for playback/TDM playback functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_rdr_fill_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 empty buf done callback for record/TDM record functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_cap_empty_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 fill buf done callback for record/TDM record functions
++ *
++ *  \param[in]	  data		Pointer to ADSP ALSA sound card
++ *  \param[in]	  opcode	Opcode of message
++ *  \param[in]	  length	Length of data buffer
++ *  \param[in]	  buffer	Pointer to data buffer
++ * \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_cap_fill_buf_done(void *data, int opcode, int length, char *buffer)
++{
++	struct snd_adsp_base_info *base = (struct snd_adsp_base_info *)data;
++
++	if (base) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->buf_queue++;
++		base->hw_idx += length; /* increase the DMA buffer index */
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	return 0;
++}
++
++/** callback functions for playback/TDM playback */
++static struct xf_callback_func rdr_callbacks =	/* PRQA S 3218 */
++{
++	.empty_buf_done = &snd_adsp_rdr_empty_buf_done,	/* PRQA S 1053 2 */
++	.fill_buf_done = &snd_adsp_rdr_fill_buf_done,
++	.event_handler = &snd_adsp_event_handler
++};
++
++/** callback functions for record/TDM record */
++static struct xf_callback_func cap_callbacks =	/* PRQA S 3218 */
++{
++	.empty_buf_done = &snd_adsp_cap_empty_buf_done,	/* PRQA S 1053 2 */
++	.fill_buf_done = &snd_adsp_cap_fill_buf_done,
++	.event_handler = &snd_adsp_event_handler
++};
++
++/*******************************************************************
++ * helper functions to get some internal data
++ * ****************************************************************/
++
++/** **************************************************************************
++ *  \brief	Get current index of CPU DAI from runtime data of substream
++ *
++ *  \param[in]	  substream	Pointer to PCM stream data
++ *  \retval	  id		Index of current CPU DAI
++ *****************************************************************************/
++static int
++snd_adsp_get_dai_id_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_soc_pcm_runtime *rtd;
++
++	rtd = (struct snd_soc_pcm_runtime *)substream->private_data;
++	return rtd->cpu_dai->id;
++}
++
++/** **************************************************************************
++ *  \brief	Get ADSP ALSA driver's data from runtime data of substream
++ *
++ *  \param[in]	substream	Pointer to PCM stream data
++ *  \retval	pointer		Pointer to driver's data
++ *****************************************************************************/
++static void *
++snd_adsp_get_drvdata_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_soc_pcm_runtime *rtd;
++
++	rtd = (struct snd_soc_pcm_runtime *)substream->private_data;
++	return snd_soc_dai_get_drvdata(rtd->cpu_dai);
++}
++
++/** **************************************************************************
++ *  \brief   Get base's data of playback/record from runtime data of substream
++ *
++ *  \param[in]	substream	Pointer to PCM stream data
++ *  \retval	pointer		Pointer to playback/record's base data
++ *****************************************************************************/
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_substream(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	struct snd_adsp_base_info *base;
++	int dai_idx;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++
++	/* get DAI index of substream */
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++
++	/* get base data of the substream */
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			base = !adsp_card->playback[dai_idx] ?
++				NULL : &adsp_card->playback[dai_idx]->base;
++		} else {
++			base = !adsp_card->record[dai_idx] ?
++				NULL : &adsp_card->record[dai_idx]->base;
++		}
++	} else {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			base = !adsp_card->tdm_playback ?
++				NULL : &adsp_card->tdm_playback->base;
++		} else {
++			base = !adsp_card->tdm_record ?
++				NULL : &adsp_card->tdm_record->base;
++		}
++	}
++
++	return base;
++}
++
++/** ***************************************************************************
++ *  \brief    Get playback/record/TDM playback/TDM record's base data
++ *	      from hr timer data
++ *
++ *  \param[in]	hrt		Pointer to hr timer data
++ *  \retval	pointer		Pointer to playback/record's base data
++ *****************************************************************************/
++static struct snd_adsp_base_info *
++snd_adsp_get_base_from_hrt(struct hrtimer *hrt)
++{
++	return (struct snd_adsp_base_info *)hrt;
++}
++
++/*****************************************************************************
++ * hrtimer interrupt function
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Interrupt function of high resolution timer
++ *
++ *  \param[in]	hrt		Pointer to hr timer data
++ *  \retval	HRTIMER_RESTART Restart the timer after expire time
++ *****************************************************************************/
++static enum hrtimer_restart snd_adsp_hrtimer_func(struct hrtimer *hrt)
++{
++	struct snd_adsp_base_info *base = snd_adsp_get_base_from_hrt(hrt);
++
++	spin_lock_irqsave(&base->lock, base->flag);
++	if (base->hw_idx != 0) {
++		spin_unlock_irqrestore(&base->lock, base->flag);
++		/* update PCM status for the next period */
++		snd_pcm_period_elapsed(base->substream);
++	} else {
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	hrtimer_forward_now(hrt, base->ktime);
++
++	return HRTIMER_RESTART;
++}
++
++/*****************************************************************************
++ * internal functions to manage playback and record functions
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Initialize playback data
++ *
++ *  \param[out]	  playback_data		Pointer to store playback data
++ *  \param[in]	  eqz_flag		Flag to indicate equalizer usage
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  EINVAL		Failed to initialize playback data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_playback_init(struct snd_adsp_playback **playback_data,
++				  int eqz_flag,
++				  struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_playback *playback;
++
++	/* allocate memory for playback data */
++	playback = kmalloc(sizeof(*playback), GFP_KERNEL);
++	if (!playback)
++		return -EINVAL;
++
++	/* init params */
++	memset(playback, 0, sizeof(struct snd_adsp_playback));
++
++	/* save the playback data */
++	*playback_data = playback;
++
++	/* set handle state as NULL state */
++	playback->rdr_state = XF_HANDLE_NULL;
++	playback->eqz_state = XF_HANDLE_NULL;
++	playback->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register renderer component */
++	if (xf_adsp_renderer_create(&playback->renderer,
++				    &rdr_callbacks,
++				    (void *)&playback->base) < 0)
++		return -EINVAL;
++
++	/* mark renderer component created */
++	playback->rdr_state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as renderer ID */
++	playback->base.handle_id = playback->renderer->handle_id;
++
++	if (eqz_flag == EQZ_ON) {
++		/* create equalizer component when equalizer is used */
++		if (xf_adsp_equalizer_create(&playback->equalizer,
++					     &rdr_callbacks,
++					     (void *)&playback->base) < 0)
++			return -EINVAL;
++
++		/* mark equalizer component created */
++		playback->eqz_state = XF_HANDLE_CREATED;
++
++		/* set target handle ID as equalizer ID */
++		playback->base.handle_id = playback->equalizer->handle_id;
++	}
++
++	/* init lock */
++	spin_lock_init(&playback->base.lock);
++
++	/* save the substream data */
++	playback->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&playback->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	playback->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	playback->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Initialize record data
++ *
++ *  \param[out]	 record_data	Pointer to store record data
++ *  \param[in]	 eqz_flag	Flag to indicate equalizer usage
++ *  \param[in]	 substream	Pointer to substream data
++ *  \retval	-EINVAL		Failed to initialize record data
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_record_init(struct snd_adsp_record **record_data,
++				int eqz_flag,
++				struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_record *record;
++
++	/* allocate memory for record data */
++	record = kmalloc(sizeof(*record), GFP_KERNEL);
++	if (!record)
++		return -EINVAL;
++
++	/* init params */
++	memset(record, 0, sizeof(struct snd_adsp_record));
++
++	/* save the record data */
++	*record_data = record;
++
++	/* set handle state as NULL state */
++	record->cap_state = XF_HANDLE_NULL;
++	record->eqz_state = XF_HANDLE_NULL;
++	record->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register capture component */
++	if (xf_adsp_capture_create(&record->capture,
++				   &cap_callbacks,
++				   (void *)&record->base) < 0)
++		return -EINVAL;
++
++	/* mark capture component created */
++	record->cap_state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as capture ID */
++	record->base.handle_id = record->capture->handle_id;
++
++	/* create equalizer component in case of it being used */
++	if (eqz_flag == EQZ_ON) {
++		if (xf_adsp_equalizer_create(&record->equalizer,
++					     &cap_callbacks,
++					     (void *)&record->base) < 0)
++			return -EINVAL;
++
++		/* mark equalizer component created */
++		record->eqz_state = XF_HANDLE_CREATED;
++
++		/* set target handle ID as equalizer ID */
++		record->base.handle_id = record->equalizer->handle_id;
++	}
++
++	/* init lock */
++	spin_lock_init(&record->base.lock);
++
++	/* save the substream data */
++	record->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&record->base.hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	record->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	record->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare playback function
++ *
++ *  \param[out]	  playback		Pointer to playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	 -EINVAL		Failed to prepare playback function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_playback_prepare(struct snd_adsp_playback *playback,
++				     struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	int dai_idx, pcm_width, ch, fs, frame_size, vol_rate, hw_buffer_size;
++	int out_rate;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_renderer *renderer;
++	struct xf_adsp_equalizer *equalizer;
++	struct snd_adsp_base_info *base;
++	int i;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	renderer = playback->renderer;
++	equalizer = playback->equalizer;
++	base = &playback->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	ch = runtime->channels;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++	vol_rate = ctr_if->vol_rate[DIRECT_PLAYBACK][dai_idx];
++	out_rate = ctr_if->sample_rate[DIRECT_PLAYBACK][dai_idx];
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = (base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE);
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* it should equal to a period size in bytes */
++	base->pcm_indirect.hw_queue_size = base->period_bytes;
++
++	/* set parameters when Renderer is not ready */
++	if (COMPONENT_IS_READY(playback->rdr_state) == FALSE) {
++		struct xf_adsp_renderer_params *params = &renderer->params;
++
++		/* apply renderer parameters */
++		params->in_rate = fs;
++		params->channel = ch;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		if (ctr_if->mix_usage == SECOND_RUN)
++			params->mix_ctrl = ctr_if->mix_usage;
++		else
++			params->mix_ctrl = MIX_UNUSED;
++
++		/* set flow as ADSP->PDMA0->SRC0->PDMA1->SSI0 */
++		params->dev1 = SRC0;
++		params->dev2 = SSI00;
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++
++		/* when MIX is enabled, change to DMAC transfer type to save */
++		/* hw FIFO */
++		if (MIX_ENABLED(params->mix_ctrl) == TRUE)
++			params->dma1 = ADMAC_CH01;
++
++		/* set volume rate if it is set by user or default value */
++		/* is 100% */
++		if (vol_rate >= 0)
++			params->vol_rate = vol_rate;
++		else
++			params->vol_rate = (1 << 20);
++
++		/* set output channel if it is set by user */
++		if (ctr_if->rdr_out_ch[dai_idx] >= MONAURAL)
++			params->out_channel = ctr_if->rdr_out_ch[dai_idx];
++		else
++			params->out_channel = params->channel;
++
++		/* set sample rate output if it is set by user */
++		if (out_rate >= 0)
++			params->out_rate = out_rate;
++
++		/* set parameters to ADSP Renderer plugin */
++		if (xf_adsp_renderer_set_params(renderer) != 0)
++			return -EINVAL;
++
++		/* allocate buffer pool to prepare the execution */
++		renderer->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(renderer->buf_pool))	/* PRQA S 306*/
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					renderer->buf_pool, i);
++
++			base->buf_queue++;
++			memset(base->buffer[i], 0, base->buf_bytes);
++		}
++
++		/* mark Renderer ready */
++		playback->rdr_state |= XF_HANDLE_READY;
++
++		/* set parameters for Equalizer if it is used */
++		if (COMPONENT_IS_CREATED(playback->eqz_state) == TRUE) {
++			/* apply Equalizer parameter setting */
++			equalizer->params.channel = ch;
++			equalizer->params.pcm_width = pcm_width;
++			equalizer->params.rate = fs;
++
++			/* get equalizer parameters from control interface */
++			/* data */
++			snd_adsp_get_eqz_params_from_control(
++				&equalizer->params,
++				&ctr_if->eqz_params[DIRECT_PLAYBACK][dai_idx],
++				true);
++
++			/* set parameters to Equalizer plugin */
++			if (xf_adsp_equalizer_set_params(equalizer) != 0)
++				return -EINVAL;
++
++			/* route Equalizer to Renderer */
++			if (xf_adsp_route(equalizer->handle_id,
++					  renderer->handle_id,
++					  XF_BUF_POOL_SIZE,
++					  base->buf_bytes) != 0)
++				return -EINVAL;
++
++			/* mark Equalizer ready */
++			playback->eqz_state |= XF_HANDLE_READY;
++
++			/* prepare data before start PCM */
++			/* PRQA S 2462 1 */ /* PRQA S 2463 1 */
++			for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++				/* send buffer to plugin to kick */
++				/* init-processing */
++				if (xf_adsp_empty_this_buffer(
++							base->handle_id,
++							base->buffer[i],
++							base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++			}
++		} else {
++			/* send zero buffer to plugin to kick */
++			/* init-processing */
++			if (xf_adsp_empty_this_buffer(base->handle_id,
++						      base->buffer[0],
++						      base->buf_bytes) != 0)
++				return -EINVAL;
++
++			spin_lock_irqsave(&base->lock, base->flag);
++			base->buf_queue--;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++		}
++
++		/* wait until all the buffer have been consummed */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset HW index */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare record function
++ *
++ *  \param[out]	  record		Pointer to record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	 -EINVAL		Failed to prepare record function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_record_prepare(struct snd_adsp_record *record,
++				   struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	int dai_idx, pcm_width, ch, fs, frame_size, vol_rate, in_rate;
++	int hw_buffer_size, hw_queue_size;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_capture *capture;
++	struct xf_adsp_equalizer *equalizer;
++	struct snd_adsp_base_info *base;
++	int i;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	capture = record->capture;
++	equalizer = record->equalizer;
++	base = &record->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	ch = runtime->channels;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++	vol_rate = ctr_if->vol_rate[DIRECT_CAPTURE][dai_idx];
++	in_rate = ctr_if->sample_rate[DIRECT_CAPTURE][dai_idx];
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* total size of allocated buffers */
++	hw_queue_size = base->period_bytes * XF_BUF_POOL_SIZE;
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = ((base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++	base->pcm_indirect.hw_queue_size = hw_queue_size;
++
++	/* prepare parameters to set to Capture plugin when it is not yet */
++	/* ready */
++	if (COMPONENT_IS_READY(record->cap_state) == FALSE) {
++		struct xf_adsp_capture_params *params = &capture->params;
++
++		/* apply capture parameters */
++		params->out_rate = fs;
++		params->channel = ch;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		params->dev1 = SRC0;
++		params->dev2 = SSI10;
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++
++		/* set volume rate if it is set by user or default volume as */
++		/* 100% */
++		if (vol_rate >= 0)
++			params->vol_rate = vol_rate;
++		else
++			params->vol_rate = (1 << 20);
++
++		/* set sample rate input if it is set by user */
++		if (in_rate >= 0)
++			params->in_rate = in_rate;
++
++		/* allocate buffer pool to prepare the execution */
++		capture->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(capture->buf_pool))		 /* PRQA S 306 */
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					capture->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* set parameters to ADSP Capture plugin */
++		if (xf_adsp_capture_set_params(capture) != 0)
++			return -EINVAL;
++
++		/* mark Capture ready */
++		record->cap_state |= XF_HANDLE_READY;
++
++		/* set parameters for Equalizer if it's used */
++		if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++			/* apply Equalizer parameter setting */
++			equalizer->params.channel = ch;
++			equalizer->params.pcm_width = pcm_width;
++			equalizer->params.rate = fs;
++
++			/* get equalizer parameter from control interface */
++			/* data */
++			snd_adsp_get_eqz_params_from_control(
++				&equalizer->params,
++				&ctr_if->eqz_params[DIRECT_CAPTURE][dai_idx],
++				true);
++
++			/* set parameters to Equalizer plugin */
++			if (xf_adsp_equalizer_set_params(equalizer) != 0)
++				return -EINVAL;
++
++			/* route Capture to Equalizer */
++			if (xf_adsp_route(capture->handle_id,
++					  equalizer->handle_id,
++					  XF_BUF_POOL_SIZE,
++					  base->buf_bytes) != 0)
++				return -EINVAL;
++
++			/* mark Equalizer ready */
++			record->eqz_state |= XF_HANDLE_READY;
++		}
++
++		/* kick init process by sending a zero buffer length */
++		xf_adsp_fill_this_buffer(base->handle_id, base->buffer[0], 0);
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until finishing initialization */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++			/* PRQA S 2462 1 */ /* PRQA S 2463 1 */
++			for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++				/* send buffer to plugin */
++				if (xf_adsp_fill_this_buffer(
++						base->handle_id,
++						base->buffer[i],
++						base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++			}
++
++			/* wait until all the buffer have been responsed */
++			while (base->buf_queue != XF_BUF_POOL_SIZE) {
++				schedule_timeout_interruptible(2);
++				if (signal_pending(current))
++					break;
++
++				/* check the error from initialization */
++				if (base->runtime_err)
++					return -EINVAL;
++			}
++		}
++
++		/* reset hw data position */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize playback function
++ *
++ *  \param[out]	playback	Pointer to playback data
++ *  \retval	-EINVAL		Failed to deinitialize playback function
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_playback_deinit(struct snd_adsp_playback *playback)
++{
++	int ret = 0;
++
++	/* perform de-initialization if playback has been created already */
++	if (playback) {
++		/* perform completion process */
++		if (COMPONENT_IS_CREATED(playback->rdr_state) == TRUE) {
++			/* send buffer with zero length to plugin for */
++			/* completion process *//* PRQA S 3200 2 */
++			xf_adsp_empty_this_buffer(playback->base.handle_id,
++						  NULL, 0);
++
++			/* free buffer pool */ /* PRQA S 3200 1 */
++			xf_adsp_free_mem_pool(playback->renderer->buf_pool);
++
++			/* destroy Renderer */
++			if (xf_adsp_renderer_destroy(playback->renderer) != 0)
++				ret = -EINVAL;
++
++			playback->renderer = NULL;
++		}
++
++		/* destroy Equalizer if it is used */
++		if (COMPONENT_IS_CREATED(playback->eqz_state) == TRUE) {
++			if (xf_adsp_equalizer_destroy(playback->equalizer))
++				ret = -EINVAL;
++
++			playback->equalizer = NULL;
++		}
++
++		/* canncel timer interrupt */
++		if (COMPONENT_IS_CREATED(playback->base.hrt_state) == TRUE)
++			hrtimer_cancel(&playback->base.hrtimer);
++
++		/* free playback data */
++		kfree(playback);
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize record function
++ *
++ *  \param[out]	 record		Pointer to record data
++ *  \retval	 -EINVAL	Failed to deinitialize record function
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_record_deinit(struct snd_adsp_record *record)
++{
++	int ret = 0;
++
++	/* perform de-initialization if record has been created already */
++	if (!record)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(record->cap_state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process *//* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(record->base.handle_id, NULL, 0);
++
++		/* free buffer pool */ /* PRQA S 3200 1 */
++		xf_adsp_free_mem_pool(record->capture->buf_pool);
++
++		if (xf_adsp_capture_destroy(record->capture))
++			ret = -EINVAL;
++
++		record->capture = NULL;
++	}
++
++	/* destroy Equalizer if it is used */
++	if (COMPONENT_IS_CREATED(record->eqz_state) == TRUE) {
++		if (xf_adsp_equalizer_destroy(record->equalizer) != 0)
++			ret = -EINVAL;
++
++		record->equalizer = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(record->base.hrt_state) == TRUE)
++		hrtimer_cancel(&record->base.hrtimer);
++
++	/* free record data */
++	kfree(record);
++
++	return ret;
++}
++
++/*****************************************************************************
++ * internal functions to manage TDM playback and TDM record functions
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	Initialize TDM playback data
++ *
++ *  \param[out]	tdm_playback_data	Pointer to store TDM playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to initialize TDM playback data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_init(struct snd_adsp_tdm_playback **tdm_playback_data,
++			   struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_tdm_playback *tdm_playback;
++
++	/* allocate memory for TDM playback data */
++	tdm_playback = kmalloc(sizeof(*tdm_playback), GFP_KERNEL);
++
++	if (!tdm_playback)
++		return -EINVAL;
++
++	/* init params */
++	memset(tdm_playback, 0, sizeof(struct snd_adsp_tdm_playback));
++
++	/* save the TDM playback data */
++	*tdm_playback_data = tdm_playback;
++
++	/* set handle state as NULL state */
++	tdm_playback->state = XF_HANDLE_NULL;
++	tdm_playback->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register TDM renderer component */
++	if (xf_adsp_tdm_renderer_create(&tdm_playback->tdm_renderer,
++					&rdr_callbacks,
++					(void *)&tdm_playback->base) < 0)
++		return -EINVAL;
++
++	/* mark TDM renderer component created */
++	tdm_playback->state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as TDM renderer ID */
++	tdm_playback->base.handle_id = tdm_playback->tdm_renderer->handle_id;
++
++	/* init lock */
++	spin_lock_init(&tdm_playback->base.lock);
++
++	/* save the substream data */
++	tdm_playback->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&tdm_playback->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	tdm_playback->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	tdm_playback->base.hrt_state = XF_HANDLE_CREATED;
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Initialize TDM record data
++ *
++ *  \param[out]	  tdm_record_data	Pointer to store TDM record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to initialize TDM record data
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_record_init(struct snd_adsp_tdm_record **tdm_record_data,
++			 struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_tdm_record *tdm_record;
++
++	/* allocate memory for TDM record data */
++	tdm_record = kmalloc(sizeof(*tdm_record), GFP_KERNEL);
++	if (!tdm_record)
++		return -EINVAL;
++
++	/* init params */
++	memset(tdm_record, 0, sizeof(struct snd_adsp_tdm_record));
++
++	/* save the TDM record data */
++	*tdm_record_data = tdm_record;
++
++	/* set handle state as NULL state */
++	tdm_record->state = XF_HANDLE_NULL;
++	tdm_record->base.hrt_state = XF_HANDLE_NULL;
++
++	/* register TDM Capture component */
++	if (xf_adsp_tdm_capture_create(&tdm_record->tdm_capture,
++				       &cap_callbacks,
++				       (void *)&tdm_record->base) != 0)
++		return -EINVAL;
++
++	/* mark TDM capture component created */
++	tdm_record->state = XF_HANDLE_CREATED;
++
++	/* set target handle ID as TDM capture ID */
++	tdm_record->base.handle_id = tdm_record->tdm_capture->handle_id;
++
++	/* init lock */
++	spin_lock_init(&tdm_record->base.lock);
++
++	/* save the substream data */
++	tdm_record->base.substream = substream;
++
++	/* init high resolution timer for updating hw status */
++	hrtimer_init(&tdm_record->base.hrtimer,
++		     CLOCK_MONOTONIC,
++		     HRTIMER_MODE_REL);
++
++	/* PRQA S 0563 1 */
++	tdm_record->base.hrtimer.function = &snd_adsp_hrtimer_func;
++	tdm_record->base.hrt_state = XF_HANDLE_CREATED;
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare TDM playback function
++ *
++ *  \param[out]	  tdm_playback		Pointer to TDM playback data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to prepare TDM playback function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_prepare(struct snd_adsp_tdm_playback *tdm_playback,
++			      struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card;
++	struct snd_adsp_control *ctr_if;
++	struct snd_pcm_runtime *runtime;
++	struct xf_adsp_tdm_renderer *tdm_renderer;
++	struct snd_adsp_base_info *base;
++	int i;
++	int pcm_width, ch_mode, fs, frame_size, hw_buffer_size;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++	runtime = substream->runtime;
++	tdm_renderer = tdm_playback->tdm_renderer;
++	base = &tdm_playback->base;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++
++	ch_mode = (runtime->channels == 8) ?
++		XA_TDM_RDR_CHANNEL_MODE_1X8 : XA_TDM_RDR_CHANNEL_MODE_1X6;
++
++	hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++
++	if (pcm_width == 16)
++		base->buf_bytes = base->period_bytes;
++	else
++		base->buf_bytes = ((base->period_bytes *
++			BYTES_PER_SAMPLE(S24_3LE)) / BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = hw_buffer_size;
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* it should equal to a period size in bytes */
++	base->pcm_indirect.hw_queue_size = base->period_bytes;
++
++	/* prepare parameters to set to TDM playback as it is not ready */
++	if (COMPONENT_IS_READY(tdm_playback->state) == FALSE) {
++		struct xf_adsp_tdm_renderer_params *params;
++
++		params = &tdm_renderer->params;
++
++		/* apply renderer parameters */
++		params->in_rate = fs;
++		params->ch_mode = ch_mode;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		/* setting Audio device indexes */
++		params->dma1 = ADMAC_CH00; /* use DMAC for transfer data */
++		params->dma2 = PDMA_CH03;
++		params->dev1 = SRC1;
++		params->dev2 = SSI30;  /* set SSI index to SSI30 */
++
++		/* set volume rate if it is set by user or default value as */
++		/* 100% */
++		params->vol_rate = (ctr_if->tdm_vol_rate[DIRECT_PLAYBACK] >= 0)
++			? ctr_if->tdm_vol_rate[DIRECT_PLAYBACK] : (1 << 20);
++
++		/* set output sampling rate if it is set by user */
++		if (ctr_if->tdm_sample_rate[DIRECT_PLAYBACK] >= 0)
++			params->out_rate =
++				ctr_if->tdm_sample_rate[DIRECT_PLAYBACK];
++
++		/* set parameters to ADSP TDM Renderer plugin */
++		if (xf_adsp_tdm_renderer_set_params(tdm_renderer) != 0)
++			return -EINVAL;
++
++		/* allocate buffer pool to prepare the execution */
++		tdm_renderer->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(tdm_renderer->buf_pool))	/* PRQA S 306*/
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					tdm_renderer->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* mark TDM Renderer created */
++		tdm_playback->state |= XF_HANDLE_READY;
++
++		/* send zero buffer to plugin to kick init-processing */
++		memset(base->buffer[0], 0, base->buf_bytes);
++
++		if (xf_adsp_empty_this_buffer(base->handle_id, base->buffer[0],
++					      base->buf_bytes) != 0)
++			return -EINVAL;
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until all the buffer have been consummed */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset HW index */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Prepare TDM record function
++ *
++ *  \param[out]	  tdm_record		Pointer to TDM record data
++ *  \param[in]	  substream		Pointer to substream data
++ *  \retval	  -EINVAL		Failed to prepare TDM record function
++ *  \retval	  0			Success
++ *****************************************************************************/
++static int snd_adsp_tdm_record_prepare(struct snd_adsp_tdm_record *tdm_record,
++				       struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_card *adsp_card =
++		snd_adsp_get_drvdata_from_substream(substream);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct xf_adsp_tdm_capture *tdm_capture = tdm_record->tdm_capture;
++	struct snd_adsp_base_info *base = &tdm_record->base;
++	int i;
++	int pcm_width, ch_mode, fs, frame_size;
++
++	/* runtime parameter */
++	fs = runtime->rate;
++
++	ch_mode = (runtime->channels == 8) ?
++		XA_TDM_RDR_CHANNEL_MODE_1X8 : XA_TDM_RDR_CHANNEL_MODE_1X6;
++
++	pcm_width = (runtime->format == SNDRV_PCM_FORMAT_S16_LE) ? 16 : 24;
++	frame_size = runtime->period_size;
++
++	/* get number of bytes in a period */
++	base->period_bytes = snd_pcm_lib_period_bytes(substream);
++	base->buf_bytes = (pcm_width == 16) ?
++			   base->period_bytes : ((base->period_bytes *
++						BYTES_PER_SAMPLE(S24_3LE)) /
++						BYTES_PER_SAMPLE(S24_LE));
++
++	/* pcm indirect configuration */
++	base->pcm_indirect.hw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
++	base->pcm_indirect.sw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	/* total size of allocated buffers */
++	base->pcm_indirect.hw_queue_size = base->period_bytes *
++					   XF_BUF_POOL_SIZE;
++
++	/* prepare parameters to set to TDM Capture as it is not yet ready */
++	if (COMPONENT_IS_READY(tdm_record->state) == FALSE) {
++		struct xf_adsp_tdm_capture_params *params;
++
++		params = &tdm_capture->params;
++
++		/* apply capture parameters */
++		params->out_rate = fs;
++		params->ch_mode = ch_mode;
++		params->pcm_width = pcm_width;
++		params->frame_size = frame_size;
++
++		/* setting Audio device indexes */
++		params->dma1 = PDMA_CH00;
++		params->dma2 = PDMA_CH01;
++		params->dev1 = SRC0;
++		params->dev2 = SSI40;  /* set input device is SSI40 */
++
++		/* set volume rate if it is set by user or default value as */
++		/* 100% */
++		params->vol_rate = (ctr_if->tdm_vol_rate[DIRECT_CAPTURE] >= 0)
++			? ctr_if->tdm_vol_rate[DIRECT_CAPTURE] : (1 << 20);
++
++		/* set input rate if it is set by user */
++		if (ctr_if->tdm_sample_rate[DIRECT_CAPTURE] >= 0) {
++			params->in_rate =
++				ctr_if->tdm_sample_rate[DIRECT_CAPTURE];
++		}
++
++		/* allocate buffer pool to prepare the execution */
++		tdm_capture->buf_pool = xf_adsp_allocate_mem_pool(
++				XF_BUF_POOL_SIZE, base->buf_bytes);
++
++		if (IS_ERR(tdm_capture->buf_pool))	/* PRQA S 306 */
++			return -EINVAL;
++
++		for (i = 0; i < XF_BUF_POOL_SIZE; i++) {
++			base->buffer[i] = xf_adsp_get_data_from_pool(
++					tdm_capture->buf_pool, i);
++
++			base->buf_queue++;
++		}
++
++		/* set parameters to ADSP TDM Capture plugin */
++		if (xf_adsp_tdm_capture_set_params(tdm_capture) != 0)
++			return -EINVAL;
++
++		/* mark TDM Capture ready */
++		tdm_record->state |= XF_HANDLE_READY;
++
++		/* kick init process by sending a zero buffer length */
++		xf_adsp_fill_this_buffer(base->handle_id, base->buffer[0], 0);
++
++		spin_lock_irqsave(&base->lock, base->flag);
++		base->buf_queue--;
++		spin_unlock_irqrestore(&base->lock, base->flag);
++
++		/* wait until finishing initialization */
++		while (base->buf_queue != XF_BUF_POOL_SIZE) {
++			schedule_timeout_interruptible(2);
++			if (signal_pending(current))
++				break;
++
++			/* check the error from initialization */
++			if (base->runtime_err)
++				return -EINVAL;
++		}
++
++		/* reset hw data position */
++		base->hw_idx = 0;
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize TDM playback function
++ *
++ *  \param[out]	  tdm_playback	Pointer to TDM playback data
++ *  \retval	  -EINVAL	Failed to deinitialize TDM playback function
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int
++snd_adsp_tdm_playback_deinit(struct snd_adsp_tdm_playback *tdm_playback)
++{
++	int ret = 0;
++
++	/* perform de-initialization if TDM playback has been created */
++	if (!tdm_playback)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(tdm_playback->state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process */
++		/* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(tdm_playback->base.handle_id,
++					  NULL, 0);
++
++		/* free buffer pool *//* PRQA S 3200 2 */
++		xf_adsp_free_mem_pool(tdm_playback->tdm_renderer->buf_pool);
++
++		/* destroy TDM Renderer component */
++		if (xf_adsp_tdm_renderer_destroy(
++				tdm_playback->tdm_renderer) != 0)
++			ret = -EINVAL;
++
++		tdm_playback->tdm_renderer = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(tdm_playback->base.hrt_state) == TRUE)
++		hrtimer_cancel(&tdm_playback->base.hrtimer);
++
++	/* free playback data */
++	kfree(tdm_playback);
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	Deinitialize TDM record function
++ *
++ *  \param[out]	 tdm_record	Pointer to TDM record data
++ *  \retval	 -EINVAL	Failed to deinitialize TDM record function
++ *  \retval	 0		Success
++ *****************************************************************************/
++static int snd_adsp_tdm_record_deinit(struct snd_adsp_tdm_record *tdm_record)
++{
++	int ret = 0;
++
++	/* perform de-initialization if TDM record has been created already */
++	if (!tdm_record)
++		return ret;
++
++	/* perform completion process */
++	if (COMPONENT_IS_CREATED(tdm_record->state) == TRUE) {
++		/* send buffer with zero length to plugin for */
++		/* completion process */
++		/* PRQA S 3200 2 */
++		xf_adsp_empty_this_buffer(tdm_record->base.handle_id, NULL, 0);
++
++		/* free buffer pool *//* PRQA S 3200 2 */
++		xf_adsp_free_mem_pool(tdm_record->tdm_capture->buf_pool);
++
++		/* destroy TDM Capture component */
++		if (xf_adsp_tdm_capture_destroy(tdm_record->tdm_capture) != 0)
++			ret = -EINVAL;
++
++		tdm_record->tdm_capture = NULL;
++	}
++
++	/* canncel timer interrupt */
++	if (COMPONENT_IS_CREATED(tdm_record->base.hrt_state) == TRUE)
++		hrtimer_cancel(&tdm_record->base.hrtimer);
++
++	/* free record data */
++	kfree(tdm_record);
++
++	return ret;
++}
++
++/*****************************************************************************
++ * callback functions of ADSP ALSA driver
++ * ***************************************************************************/
++
++/** **************************************************************************
++ *  \brief	 Open a playback/TDM playback or record/TDM record stream
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_open(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *adsp_card;
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	struct snd_adsp_control *ctr_if;
++
++	adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	ctr_if = &adsp_card->ctr_if;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		/* register data for playback/record functions */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			/* perform playback initialization */
++			if (snd_adsp_playback_init(
++				   &adsp_card->playback[dai_idx],
++				   ctr_if->eqz_switch[DIRECT_PLAYBACK][dai_idx],
++				   substream) < 0) {
++				/* perform playback de-initialization when */
++				/* the initialization fails */
++				snd_adsp_playback_deinit(
++						adsp_card->playback[dai_idx]);
++
++				adsp_card->playback[dai_idx] = NULL;
++				return -EINVAL;
++			}
++		} else {
++			/* perform record initialization */
++			if (snd_adsp_record_init(
++				    &adsp_card->record[dai_idx],
++				    ctr_if->eqz_switch[DIRECT_CAPTURE][dai_idx],
++				    substream) < 0) {
++				/* perform record de-initialization when the */
++				/* initialization fails */
++				snd_adsp_record_deinit(
++						adsp_card->record[dai_idx]);
++
++				adsp_card->record[dai_idx] = NULL;
++				return -EINVAL;
++			}
++		}
++
++		/* save the hardware parameters */
++		snd_soc_set_runtime_hwparams(substream, &snd_pcm_adsp_hw);
++
++		/* each period has a frame size */
++		snd_pcm_hw_constraint_single(substream->runtime,
++					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
++					     FRAME_SIZE);
++	} else {
++		/* register data for TDM playback/record functions */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			/* perform TDM playback initialization */
++			if (snd_adsp_tdm_playback_init(
++						&adsp_card->tdm_playback,
++						substream) < 0) {
++				/* perform TDM playback de-initialization */
++				/* when the initialization fails */
++				snd_adsp_tdm_playback_deinit(
++						adsp_card->tdm_playback);
++
++				adsp_card->tdm_playback = NULL;
++				return -EINVAL;
++			}
++		} else {
++			/* perform TDM record initialization */
++			if (snd_adsp_tdm_record_init(&adsp_card->tdm_record,
++						     substream) < 0) {
++				/* perform TDM record de-initialization */
++				/* when the initialization fails */
++				snd_adsp_tdm_record_deinit(
++						adsp_card->tdm_record);
++
++				adsp_card->tdm_record = NULL;
++				return -EINVAL;
++			}
++		}
++
++		/* save the hardware parameters */
++		snd_soc_set_runtime_hwparams(substream, &snd_pcm_adsp_tdm_hw);
++
++		/* each period has a frame size */
++		snd_pcm_hw_constraint_single(substream->runtime,
++					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
++					     TDM_FRAME_SIZE);
++	}
++
++	snd_pcm_hw_constraint_integer(substream->runtime,
++				      SNDRV_PCM_HW_PARAM_PERIODS);
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Close a playback/TDM playback or record/TDM record stream
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_close(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *adsp_card =
++		snd_adsp_get_drvdata_from_substream(substream);
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	int err = 0;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		/* destroy Renderer/Capture or Equalizer (if used) */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			if (snd_adsp_playback_deinit(
++					adsp_card->playback[dai_idx]) < 0)
++				err = -EINVAL;
++
++			adsp_card->playback[dai_idx] = NULL;
++		} else {
++			if (snd_adsp_record_deinit(
++					adsp_card->record[dai_idx]) < 0)
++				err = -EINVAL;
++
++			adsp_card->record[dai_idx] = NULL;
++		}
++	} else {
++		/* destroy TDM Renderer/TDM Capture */
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
++			if (snd_adsp_tdm_playback_deinit(
++					adsp_card->tdm_playback) < 0)
++				err = -EINVAL;
++
++			adsp_card->tdm_playback = NULL;
++		} else {
++			if (snd_adsp_tdm_record_deinit(
++					adsp_card->tdm_record) < 0)
++				err = -EINVAL;
++
++			adsp_card->tdm_record = NULL;
++		}
++	}
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	Allocate ALSA buffer and calculate expire time of hr timer
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-ENOMEM			Cannot allocate ALSA buffer
++ *****************************************************************************/
++static int snd_adsp_pcm_hw_params(struct snd_pcm_substream *substream,
++				  struct snd_pcm_hw_params *hw_params)
++{
++	struct snd_adsp_base_info *base;
++	int err = 0;
++
++	base = snd_adsp_get_base_from_substream(substream);
++
++	/* set expire time of hrtimer, this value should be time for */
++	/* transfer a frame */
++	base->ktime = ns_to_ktime((1000000000 / params_rate(hw_params)) *
++				  params_period_size(hw_params));
++
++	err = snd_pcm_lib_malloc_pages(substream,
++				       params_buffer_bytes(hw_params));
++
++	/* reset DMA buffer area */
++	memset(substream->runtime->dma_area, 0, substream->runtime->dma_bytes);
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	 Free the allocated ALSA buffer
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Cannot deallocate buffer
++ *****************************************************************************/
++static int snd_adsp_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	return snd_pcm_lib_free_pages(substream);
++}
++
++/** **************************************************************************
++ *  \brief	 Prepare playback/TDM playback or record/TDM record function
++ *		   before transferring data
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval		 0		Success
++ *  \retval		 -EINVAL	Error
++ *****************************************************************************/
++static int snd_adsp_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	/* get ADSP soundcard and CPU DAI index */
++	struct snd_adsp_card *
++		adsp_card = snd_adsp_get_drvdata_from_substream(substream);
++	int dai_idx = snd_adsp_get_dai_id_from_substream(substream);
++	int err = 0;
++
++	if (dai_idx == RDR_DAI_IDX0 || dai_idx == RDR_DAI_IDX1 ||
++	    dai_idx == RDR_DAI_IDX2 || dai_idx == RDR_DAI_IDX3) {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			/* get playback prepared to execute */
++			err = snd_adsp_playback_prepare(
++				adsp_card->playback[dai_idx], substream);
++		else
++			/* get record prepared to execute */
++			err = snd_adsp_record_prepare(
++				adsp_card->record[dai_idx], substream);
++	} else {
++		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++			/* get TDM playback prepared to execute */
++			err = snd_adsp_tdm_playback_prepare(
++				adsp_card->tdm_playback, substream);
++		else
++			/* get TDM record prepared to execute */
++			err = snd_adsp_tdm_record_prepare(
++				adsp_card->tdm_record, substream);
++	}
++
++	return err;
++}
++
++/** **************************************************************************
++ *  \brief	 Trigger playback/TDM playback or record/TDM record stream
++ *		   to go to next phase
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_trigger(struct snd_pcm_substream *substream, int idx)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++
++	switch (idx) {
++	case SNDRV_PCM_TRIGGER_START:
++	case SNDRV_PCM_TRIGGER_RESUME:
++		/* start high-resolution timer */
++		hrtimer_start(&base->hrtimer, base->ktime, HRTIMER_MODE_REL);
++
++		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
++			int buf_queue = 0;
++
++			/* get current available buffer */
++			spin_lock_irqsave(&base->lock, base->flag);
++			buf_queue = base->buf_queue;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++
++			/* send all available buffer to plugin to */
++			/* get data */
++			for (; buf_queue > 0; buf_queue--) {
++				if (xf_adsp_fill_this_buffer(
++						base->handle_id,
++						base->buffer[base->buf_idx],
++						base->buf_bytes) != 0)
++					return -EINVAL;
++
++				spin_lock_irqsave(&base->lock, base->flag);
++				base->buf_queue--;
++				spin_unlock_irqrestore(&base->lock, base->flag);
++
++				base->buf_idx++;
++
++				if (base->buf_idx >= XF_BUF_POOL_SIZE)
++					base->buf_idx = 0;
++			}
++		}
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++	case SNDRV_PCM_TRIGGER_SUSPEND:
++		break;
++	default:
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Return HW data position
++ *
++ *  \param[in]	  substream		Pointer to substream object
++ *  \retval	  position		HW data position
++ *****************************************************************************/
++static snd_pcm_uframes_t
++snd_adsp_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++	unsigned int hw_idx, hw_buffer_size;
++	snd_pcm_uframes_t pointer;
++
++	/* convert hw index to correct as submitted bytes */
++	spin_lock_irqsave(&base->lock, base->flag);
++	hw_idx = (base->hw_idx / base->buf_bytes) * base->period_bytes;
++	spin_unlock_irqrestore(&base->lock, base->flag);
++
++	hw_buffer_size = base->pcm_indirect.hw_buffer_size;
++
++	if (hw_idx >= hw_buffer_size) {
++		spin_lock_irqsave(&base->lock, base->flag);
++
++		base->hw_idx -= (hw_buffer_size / base->period_bytes) *
++							base->buf_bytes;
++
++		spin_unlock_irqrestore(&base->lock, base->flag);
++	}
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		pointer = snd_pcm_indirect_playback_pointer(substream,
++							    &base->pcm_indirect,
++							    hw_idx);
++	else
++		pointer = snd_pcm_indirect_capture_pointer(substream,
++							   &base->pcm_indirect,
++							   hw_idx);
++
++	return pointer;
++}
++
++/** **************************************************************************
++ *  \brief	  Call read/write process to transfer data
++ *
++ *  \param[in]	substream		Pointer to substream object
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_pcm_ack(struct snd_pcm_substream *substream)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++
++	if (base->runtime_err)
++		return -EINVAL;
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++		snd_pcm_indirect_playback_transfer(substream,
++						   &base->pcm_indirect,
++						   snd_adsp_pcm_transfer);
++	else
++		snd_pcm_indirect_capture_transfer(substream,
++						  &base->pcm_indirect,
++						  snd_adsp_pcm_transfer);
++
++	return 0;
++}
++
++/** ***************************************************************************
++ *  \brief	  Copy data from source buffer to destination buffer
++ *
++ *  \params[in]	 dst		Destination buffer pointer
++ *  \params[out] src		Source buffer pointer
++ *  \params[in]	 dst_size	Destination buffer size in byte
++ *  \params[in]	 src_size	Source buffer size in byte
++ *  \retval	 None
++ *****************************************************************************/
++static inline void
++snd_adsp_copy_data(void *dst, void *src, int dst_size, int src_size)
++{
++	unsigned char *data_dst = dst;
++	unsigned char *data_src = src;
++	int i;
++
++	if (dst_size == src_size) {
++		/* src and dst bufs are same size, does not need to convert */
++		memcpy(data_dst, data_src, dst_size);
++
++	} else if (dst_size < src_size) {
++		for (i = 0; i < (dst_size - BYTES_PER_SAMPLE(S24_3LE));
++				i += BYTES_PER_SAMPLE(S24_3LE)) {
++			*(u32 *)data_dst = *(u32 *)data_src;
++
++			data_dst += BYTES_PER_SAMPLE(S24_3LE);
++			data_src += BYTES_PER_SAMPLE(S24_LE);
++		}
++
++		/* copy a S24_3LE sample from S24_LE sample */
++		data_dst[0] = data_src[0];
++		data_dst[1] = data_src[1];
++		data_dst[2] = data_src[2];
++
++	} else {
++		unsigned int tmp;
++
++		for (i = 0; i < (dst_size - BYTES_PER_SAMPLE(S24_LE));
++				i += BYTES_PER_SAMPLE(S24_LE)) {
++			tmp = *(u32 *)data_src;
++			*(u32 *)data_dst = tmp & 0x0FFFFFF;
++
++			data_dst += BYTES_PER_SAMPLE(S24_LE);
++			data_src += BYTES_PER_SAMPLE(S24_3LE);
++		}
++
++		/* copy a S24_LE sample from S24_3LE sample */
++		data_dst[0] = data_src[0];
++		data_dst[1] = data_src[1];
++		data_dst[2] = data_src[2];
++		data_dst[3] = 0;
++	}
++}
++
++/** **************************************************************************
++ *  \brief	  Transfer data process between ALSA buffer and ADSP buffer
++ *
++ *  \param[in]	  substream		Pointer to substream object
++ *  \param[in]	  rec			Pointer to indirect PCM data
++ *  \param[in]	  bytes			Number of byte need to be transferred
++ *  \retval	  None
++ *****************************************************************************/
++static void snd_adsp_pcm_transfer(struct snd_pcm_substream *substream,
++				  struct snd_pcm_indirect *rec,
++				  size_t bytes)
++{
++	struct snd_adsp_base_info *
++		base = snd_adsp_get_base_from_substream(substream);
++	int direct = substream->stream;
++	int trans_bytes = bytes;
++	int buf_bytes, period_bytes;
++	void *dma_buf, *data_buff;
++
++	/* get the DMA buffer pointer */
++	dma_buf = (void *)(substream->runtime->dma_area + rec->sw_data);
++
++	/* get information from base */
++	buf_bytes = base->buf_bytes;
++	period_bytes = base->period_bytes;
++
++	/* make sure the available buffer and transfer size - TBD */
++	while (trans_bytes > 0) {
++		spin_lock_irqsave(&base->lock, base->flag);
++		if (base->buf_queue > 0 && trans_bytes >= period_bytes) {
++			base->buf_queue--;
++			spin_unlock_irqrestore(&base->lock, base->flag);
++
++			/* get the buffer pointer from stream */
++			data_buff = base->buffer[base->buf_idx];
++
++			if (direct == SNDRV_PCM_STREAM_PLAYBACK) {
++				/* copy data from user *//* PRQA S 3200 2 */
++				snd_adsp_copy_data(data_buff, dma_buf,
++						   buf_bytes, period_bytes);
++
++				/* send buffer to plugin */
++				if (xf_adsp_empty_this_buffer(base->handle_id,
++							      data_buff,
++							      buf_bytes) < 0)
++					base->runtime_err = TRUE;
++			} else {
++				/* copy data to user *//* PRQA S 3200 2 */
++				snd_adsp_copy_data(dma_buf, data_buff,
++						   period_bytes, buf_bytes);
++
++				/* send buffer to plugin */
++				if (xf_adsp_fill_this_buffer(base->handle_id,
++							     data_buff,
++							     buf_bytes) < 0)
++					base->runtime_err = TRUE;
++			}
++
++			base->buf_idx++;
++			if (base->buf_idx >= XF_BUF_POOL_SIZE)
++				base->buf_idx = 0;
++		} else {
++			spin_unlock_irqrestore(&base->lock, base->flag);
++			break;
++		}
++
++		trans_bytes -= period_bytes;
++	}
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Volume control
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  uinfo		Pointer to info structure of volume control
++ *  \retval		 0	Success
++ *****************************************************************************/
++static int snd_adsp_control_volume_info(struct snd_kcontrol *kcontrol,
++					struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 799;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get volume value
++ *
++ *  \param[in]	kcontrol		Pointer to control instance
++ *  \param[in]	ucontrol		Pointer to volume value
++ *  \retval	0			Success
++ *  \retval	-EINVAL			Error
++ *****************************************************************************/
++static int snd_adsp_control_volume_get(struct snd_kcontrol *kcontrol,
++				       struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	int handle_state, handle_id;
++	int volume, cmd_idx, direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine command index, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* get the volume's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get the volume's value from the plugin */
++		if (xf_adsp_get_param(handle_id, cmd_idx, &volume) != 0)
++			return -EINVAL;
++
++		/* check the value after getting it and adjust it */
++		ucontrol->value.integer.value[0] = (volume == 0xFFFFFFFF) ?
++					(-1) : (volume * VOLUME_SCALE) >> 20;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			ucontrol->value.integer.value[0] =
++					(ctr_if->vol_rate[direction][index] *
++					 VOLUME_SCALE) >> 20;
++		else
++			ucontrol->value.integer.value[0] =
++					(ctr_if->tdm_vol_rate[direction] *
++					 VOLUME_SCALE) >> 20;
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set volume value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to volume value
++ *  \retval	  1		Volume change
++ *  \retval	  0		Volume does not change
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1*/
++static int
++snd_adsp_control_volume_put(struct snd_kcontrol *kcontrol,
++			    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	struct snd_adsp_control *ctr_if = &adsp_card->ctr_if;
++	int volume;
++	int ret;
++	int handle_state, handle_id, cmd_idx, volume_get;
++	int direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state and handle ID */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* get the value to set */
++	if (ucontrol->value.integer.value[0] == -1) {
++		volume = 0xFFFFFFFF;
++	} else {
++		/* round up the value if needed */
++		volume = (ucontrol->value.integer.value[0] * (1 << 20)) /
++			  VOLUME_SCALE;
++
++		if ((ucontrol->value.integer.value[0] * (1 << 20)) >
++		    (VOLUME_SCALE * volume))
++			volume += 1;
++	}
++
++	/* determine command index, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* set volume to plugin */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* TDM does not support set volume in runtime state */
++		if (kcontrol->id.name[0] == PREFIX_OF_TDM_CTR_NAME)
++			return -EINVAL;
++
++		/* apply set volume value to ADSP from user setting */
++		if (xf_adsp_set_param(handle_id, cmd_idx, volume) != 0)
++			return -EINVAL;
++
++		/* get volume from ADSP after setting to confirm */
++		if (xf_adsp_get_param(handle_id, cmd_idx, &volume_get) != 0)
++			return -EINVAL;
++
++		/* check if the value has changed */
++		ret = (volume_get == volume) ? 1 : 0;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			ctr_if->vol_rate[direction][index] = volume;
++		else
++			ctr_if->tdm_vol_rate[direction] = volume;
++
++		ret = 1;
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Sample Rate Converter control
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	uinfo		Pointer to info structure of sample rate
++ *				converter control
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_control_sample_rate_info(struct snd_kcontrol *kcontrol,
++					     struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 48000;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get sample rate value
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	ucontrol	Pointer to sample rate value
++ *  \retval	0		Success
++ *  \retval	-EINVAL		Error
++ *****************************************************************************/
++static int snd_adsp_control_sample_rate_get(struct snd_kcontrol *kcontrol,
++					    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int *rate;
++	int handle_id, handle_state, cmd_idx, direction;
++	unsigned int index;
++
++	rate = (int *)&ucontrol->value.integer.value[0]; /* PRQA S 310 */
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state and handle ID */
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine command, direction, handle state, handle ID */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++			handle_id =
++				adsp_card->playback[index]->renderer->handle_id;
++		}
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->cap_state;
++
++			handle_id =
++				adsp_card->record[index]->capture->handle_id;
++		}
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback) {
++				handle_state = adsp_card->tdm_playback->state;
++
++				handle_id =
++			       adsp_card->tdm_playback->tdm_renderer->handle_id;
++			}
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record) {
++				handle_state = adsp_card->tdm_record->state;
++
++				handle_id =
++				  adsp_card->tdm_record->tdm_capture->handle_id;
++			}
++		}
++	}
++
++	/* get parameter from plugin */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		if (xf_adsp_get_param(handle_id, cmd_idx, rate) != 0)
++			return -EINVAL;
++	} else {
++		if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++			*rate = adsp_card->ctr_if.sample_rate[direction][index];
++		else
++			*rate = adsp_card->ctr_if.tdm_sample_rate[direction];
++	}
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set sample rate value
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	ucontrol	Pointer to sample rate value
++ *  \retval	1		Sample rate change
++ *  \retval	0		Sample rate does not change
++ *  \retval	-EINVAL		Error
++ *****************************************************************************/
++/* PRQA S 3673 1 */
++static int
++snd_adsp_control_sample_rate_put(struct snd_kcontrol *kcontrol,
++				 struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	unsigned int index;
++	int rate;
++	int handle_state, cmd_idx, direction;
++	int ret = 1;
++
++	rate = (int)ucontrol->value.integer.value[0];
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine command, direction and handle state */
++	if (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) {
++		cmd_idx = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++		direction = DIRECT_PLAYBACK;
++
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->rdr_state;
++
++	} else if (kcontrol->id.name[0] == PREFIX_OF_CAPTURE_CTR_NAME) {
++		cmd_idx = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++		direction = DIRECT_CAPTURE;
++
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->cap_state;
++
++	} else {
++		if (kcontrol->id.name[3] == TDM_PLAYBACK) {
++			cmd_idx = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++			direction = DIRECT_PLAYBACK;
++
++			if (adsp_card->tdm_playback)
++				handle_state = adsp_card->tdm_playback->state;
++
++		} else {
++			cmd_idx = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++			direction = DIRECT_CAPTURE;
++
++			if (adsp_card->tdm_record)
++				handle_state = adsp_card->tdm_record->state;
++		}
++	}
++
++	/* get the value to set */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		return -EINVAL;
++
++	if (kcontrol->id.name[0] != PREFIX_OF_TDM_CTR_NAME)
++		adsp_card->ctr_if.sample_rate[direction][index] = rate;
++	else
++		adsp_card->ctr_if.tdm_sample_rate[direction] = rate;
++
++	ret = 1;
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Equalizer control
++ *
++ *  \param[in]	kcontrol	Pointer to control instance
++ *  \param[in]	uinfo		Pointer to info structure of Equalizer control
++ *  \retval	0		Success
++ *****************************************************************************/
++static int snd_adsp_control_eqz_info(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = MAX_EQZ_PARAM_NUMBER;
++	uinfo->value.integer.min = -1;
++	uinfo->value.integer.max = 0x7fffffff;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get equalizer parameters value
++ *
++ *  \param[in]	  kcontrol		Pointer to control instance
++ *  \param[in]	  ucontrol		Pointer to equalizer parameters value
++ *  \retval	  0			Success
++ *  \retval	  -EINVAL		Error
++ *****************************************************************************/
++static int snd_adsp_control_eqz_get(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int handle_state, direction;
++	int i, j, filter_index;
++	unsigned int index;
++	struct xf_adsp_equalizer *equalizer;
++	struct xf_adsp_equalizer_params *eqz_params;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determin direction of stream */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state, handle ID, equalizer pointer */
++	handle_state = XF_HANDLE_NULL;
++	equalizer = NULL;
++
++	/* get component's state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index]) {
++			handle_state = adsp_card->playback[index]->eqz_state;
++			equalizer = adsp_card->playback[index]->equalizer;
++		}
++	} else {
++		if (adsp_card->record[index]) {
++			handle_state = adsp_card->record[index]->eqz_state;
++			equalizer = adsp_card->record[index]->equalizer;
++		}
++	}
++
++	/* perform parameters' values getting */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get equalizer's parameters */
++		if (xf_adsp_equalizer_get_params(equalizer) != 0)
++			return -EINVAL;
++
++		eqz_params = &equalizer->params;
++	} else {
++		eqz_params = &adsp_card->ctr_if.eqz_params[direction][index];
++	}
++
++	/* get equalizer type: PARAMETRIC or GRAPHIC */
++	ucontrol->value.integer.value[0] = eqz_params->eqz_type;
++
++	/* get parameters' value from Equalizer plugin */
++	if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		for (i = 0, filter_index = 1;
++		     filter_index <= XA_REL_EQZ_FILTER_NUM;
++		     i++, filter_index++) {
++			/* get filter index */
++			ucontrol->value.integer.value[(i * 6) + 1] =
++				filter_index;
++
++			/* get frequency centre */
++			ucontrol->value.integer.value[(i * 6) + 2] =
++				eqz_params->p_coef.fc[i];
++
++			/* get bandwidth */
++			ucontrol->value.integer.value[(i * 6) + 3] =
++				eqz_params->p_coef.band_width[i];
++
++			/* get filter type */
++			ucontrol->value.integer.value[(i * 6) + 4] =
++				eqz_params->p_coef.type[i];
++
++			/* get gain base */
++			ucontrol->value.integer.value[(i * 6) + 5] =
++				eqz_params->p_coef.gain_base[i];
++
++			/* get gain */
++			ucontrol->value.integer.value[(i * 6) + 6] =
++				eqz_params->p_coef.gain[i];
++		}
++	} else {
++		for (i = 0, filter_index = 1;
++		     filter_index <= XA_REL_EQZ_GRAPHIC_BAND_NUM;
++		     i++, filter_index++) {
++			/* get band index */
++			ucontrol->value.integer.value[(i * 2) + 1] =
++				filter_index;
++
++			/* get graphic gain */
++			ucontrol->value.integer.value[(i * 2) + 2] =
++				eqz_params->g_coef.gain_g[i];
++		}
++
++		j = (i * 2) + 1;
++
++		/* make the rest of values silent */
++		while (j < MAX_EQZ_PARAM_NUMBER) {
++			ucontrol->value.integer.value[j] = -1;
++			j++;
++		}
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set equalizer parameters value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer parameters value
++ *  \retval	  1		Equalizer parameters change
++ *  \retval	  0		Equalizer parameters does not change
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1*/
++static int snd_adsp_control_eqz_put(struct snd_kcontrol *kcontrol,
++				    struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int handle_state, direction, filter_idx;
++	int i;
++	int index;
++	struct xf_adsp_equalizer_params *eqz_params = NULL;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* get the handle state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->eqz_state;
++	} else {
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->eqz_state;
++	}
++
++	/* perform equalizer's parameters setting */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		return -EINVAL;
++
++	/* PRQA S 310 1*/
++	eqz_params = &adsp_card->ctr_if.eqz_params[direction][index];
++
++	i = 0;
++	/* PRQA S 3440 1*/
++	eqz_params->eqz_type = ucontrol->value.integer.value[i];
++	i++;
++	filter_idx = 0;
++
++	if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		while (i < MAX_EQZ_PARAM_NUMBER) {
++			/* get index filter */
++			/* PRQA S 3440*/
++			filter_idx = ucontrol->value.integer.value[i];
++			i++;
++
++			/* valid index filter is range */
++			/* (1 to XA_REL_EQZ_FILTER_NUM) */
++			if (filter_idx >= 1 &&
++			    filter_idx <= XA_REL_EQZ_FILTER_NUM) {
++					/* PRQA S 3440 5*/
++				eqz_params->p_coef.fc[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.band_width[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.type[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.gain_base[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++				eqz_params->p_coef.gain[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++
++				i++;
++			}
++			/* index filter = -1 means that user */
++			/* does not set this filter */
++			else if (filter_idx == -1 || filter_idx == 0) {
++				i += 5;
++			} else {
++				return -EINVAL;
++			}
++		}
++	} else if (eqz_params->eqz_type == XA_REL_EQZ_TYPE_GRAPHIC) {
++		while (i < ((XA_REL_EQZ_GRAPHIC_BAND_NUM * 2) + 1)) {
++			/*get index filter */
++			/* PRQA S 3440 */
++			filter_idx = ucontrol->value.integer.value[i++];
++
++			if (filter_idx >= 1 &&
++			    filter_idx <= XA_REL_EQZ_GRAPHIC_BAND_NUM) {
++				eqz_params->g_coef.gain_g[filter_idx - 1] =
++					ucontrol->value.integer.value[i];
++				i++;
++
++			} else if (filter_idx == -1 || filter_idx == 0) {
++				i += 1;
++			} else {
++				return -EINVAL;
++			}
++		}
++	} else {
++		return -EINVAL;
++	}
++
++	return 1;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Equalizer Switch control
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  uinfo		Pointer to info structure of Equalizer
++ *				Switch control
++ *  \retval	  0		Success
++ *****************************************************************************/
++static int snd_adsp_control_eqz_switch_info(struct snd_kcontrol *kcontrol,
++					    struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = 1;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get equalizer switch value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer switch value
++ *  \retval	  0		Success
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_eqz_switch_get(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int direction;
++	unsigned int index;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++					     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* get the Equalizer switch status */
++	ucontrol->value.integer.value[0] =
++		adsp_card->ctr_if.eqz_switch[direction][index];
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set equalizer switch value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to equalizer switch value
++ *  \retval	  1		Equalizer switch change
++ *  \retval	  0		Equalizer switch does not change
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++/* PRQA S 3673 1 */
++static int
++snd_adsp_control_eqz_switch_put(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int eqz_switch;
++	int handle_state, direction;
++	unsigned int index;
++	int ret = 0;
++
++	eqz_switch = ucontrol->value.integer.value[0];
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	/* determine the direction */
++	direction = (kcontrol->id.name[0] == PREFIX_OF_PLAYBACK_CTR_NAME) ?
++		     DIRECT_PLAYBACK : DIRECT_CAPTURE;
++
++	/* set handle state as NULL state */
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine handle state */
++	if (direction == DIRECT_PLAYBACK) {
++		if (adsp_card->playback[index])
++			handle_state = adsp_card->playback[index]->rdr_state;
++	} else {
++		if (adsp_card->record[index])
++			handle_state = adsp_card->record[index]->cap_state;
++	}
++
++	/* set the status of Equalizer */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* runtime setting is not supported */
++		ret = -EINVAL;
++	} else {
++		adsp_card->ctr_if.eqz_switch[direction][index] = eqz_switch;
++		ret = 1;
++	}
++
++	return ret;
++}
++
++/** **************************************************************************
++ *  \brief	 Get info of Renderer output channel
++ *
++ *  \param[in]	  kcontrol Pointer to control instance
++ *  \param[in]	  uinfo	   Pointer to info structure of Renderer output channel
++ *  \retval	  0	   Success
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_info(struct snd_kcontrol *kcontrol,
++				      struct snd_ctl_elem_info *uinfo)
++{
++	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = MONAURAL;
++	uinfo->value.integer.max = STEREO;
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Get Renderer output channel's value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to Renderer output channel value
++ *  \retval	  0		Success
++ *  \retval	 -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_get(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	int rdr_out_ch;
++	unsigned int index;
++	int handle_state, handle_id;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	handle_state = XF_HANDLE_NULL;
++	handle_id = -1;
++
++	/* determine handle state and handle ID */
++	if (adsp_card->playback[index]) {
++		handle_state = adsp_card->playback[index]->rdr_state;
++		handle_id = adsp_card->playback[index]->renderer->handle_id;
++	}
++
++	/* get Renderer output channel's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE) {
++		/* get Renderer output channel's value from Renderer plugin */
++		if (xf_adsp_get_param(handle_id,
++				      XA_RDR_CONFIG_PARAM_OUT_CHANNELS,
++				      &rdr_out_ch) != 0) {
++			return -EINVAL;
++		}
++
++		ucontrol->value.integer.value[0] = rdr_out_ch;
++	} else {
++		ucontrol->value.integer.value[0] =
++		adsp_card->ctr_if.rdr_out_ch[index];
++	}
++
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Set Renderer output channel's value
++ *
++ *  \param[in]	  kcontrol	Pointer to control instance
++ *  \param[in]	  ucontrol	Pointer to Renderer output channel value
++ *  \retval	  1		Success
++ *  \retval	  -EINVAL	Error
++ *****************************************************************************/
++static int
++snd_adsp_control_rdr_out_channel_put(struct snd_kcontrol *kcontrol,
++				     struct snd_ctl_elem_value *ucontrol)
++{
++	struct snd_adsp_card *adsp_card = snd_kcontrol_chip(kcontrol);
++	unsigned int index;
++	int handle_state;
++	int ret = 1;
++
++	/* get the index */
++	index = kcontrol->id.index;
++
++	handle_state = XF_HANDLE_NULL;
++
++	/* determine handle state and handle ID */
++	if (adsp_card->playback[index])
++		handle_state = adsp_card->playback[index]->rdr_state;
++
++	/* get Renderer output channel's value */
++	if (COMPONENT_IS_READY(handle_state) == TRUE)
++		/* not support runtime setting */
++		ret = -EINVAL;
++	else
++		adsp_card->ctr_if.rdr_out_ch[index] =
++			ucontrol->value.integer.value[0];
++
++	return ret;
++}
++
++/** control interface for playback's volume rate */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_playback_volume_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	}
++};
++
++/** control interface for Capture's volume rate */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_capture_volume_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_VOLUME_CTR_NAME,
++		.info = &snd_adsp_control_volume_info,
++		.get = &snd_adsp_control_volume_get,
++		.put = &snd_adsp_control_volume_put
++	}
++};
++
++/** control interface for playback's output sample rate */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_playback_sample_rate_out_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_OUT_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	}
++};
++
++/** control interface for Capture's input sample rate */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_capture_sample_rate_in_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_IN_RATE_CTR_NAME,
++		.info = &snd_adsp_control_sample_rate_info,
++		.get = &snd_adsp_control_sample_rate_get,
++		.put = &snd_adsp_control_sample_rate_put
++	}
++};
++
++/** control interface for Equalizer parameters in playback */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_playback_equalizer_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	}
++};
++
++/** control interface for Equalizer parameters in record */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_capture_equalizer_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_EQZ_CTR_NAME,
++		.info = &snd_adsp_control_eqz_info,
++		.get = &snd_adsp_control_eqz_get,
++		.put = &snd_adsp_control_eqz_put
++	}
++};
++
++/** control interface for Equalizer usage in playback */
++/* PRQA S 3218 */
++static struct snd_kcontrol_new
++snd_adsp_playback_equalizer_switch_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	}
++};
++
++/** control interface for Equalizer usage in record */
++/* PRQA S 3218 1*/
++static struct snd_kcontrol_new
++snd_adsp_capture_equalizer_switch_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX1,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX2,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX3,
++		.name = CAPTURE_EQZ_SWITCH_CTR_NAME,
++		.info = &snd_adsp_control_eqz_switch_info,
++		.get = &snd_adsp_control_eqz_switch_get,
++		.put = &snd_adsp_control_eqz_switch_put
++	}
++};
++
++/** control interface for playback's output channel */
++static struct snd_kcontrol_new
++snd_adsp_playback_out_channel_control[MAX_DAI_IDX - 1] = {
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	/* PRQA S 1053 5 */
++		.index = RDR_DAI_IDX0,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX1,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX2,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	},
++	{
++		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++		.index = RDR_DAI_IDX3,
++		.name = PLAYBACK_OUT_CHANNEL_CTR_NAME,
++		.info = &snd_adsp_control_rdr_out_channel_info,
++		.get = &snd_adsp_control_rdr_out_channel_get,
++		.put = &snd_adsp_control_rdr_out_channel_put
++	}
++};
++
++/** control interface for TDM playback's volume rate */
++static struct snd_kcontrol_new snd_adsp_tdm_playback_volume_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_PLAYBACK_VOLUME_CTR_NAME,
++	.info = &snd_adsp_control_volume_info,
++	.get = &snd_adsp_control_volume_get,
++	.put = &snd_adsp_control_volume_put
++};
++
++/** control interface for TDM capture's volume rate */
++static struct snd_kcontrol_new snd_adsp_tdm_capture_volume_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_CAPTURE_VOLUME_CTR_NAME,
++	.info = &snd_adsp_control_volume_info,
++	.get = &snd_adsp_control_volume_get,
++	.put = &snd_adsp_control_volume_put
++};
++
++/** control interface for TDM playback's output sample rate */
++static struct snd_kcontrol_new snd_adsp_tdm_playback_sample_rate_out_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_PLAYBACK_OUT_RATE_CTR_NAME,
++	.info = &snd_adsp_control_sample_rate_info,
++	.get = &snd_adsp_control_sample_rate_get,
++	.put = &snd_adsp_control_sample_rate_put
++};
++
++/** control interface for TDM capture's input sample rate */
++static struct snd_kcontrol_new snd_adsp_tdm_capture_sample_rate_in_control = {
++	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		/* PRQA S 1053 5 */
++	.name = TDM_CAPTURE_IN_RATE_CTR_NAME,
++	.info = &snd_adsp_control_sample_rate_info,
++	.get = &snd_adsp_control_sample_rate_get,
++	.put = &snd_adsp_control_sample_rate_put
++};
++
++/** PCM callback function of the sound card */
++static struct snd_pcm_ops snd_adsp_pcm_ops = {
++	.open = &snd_adsp_pcm_open,	/* PRQA S 1053 10 */
++	.close = &snd_adsp_pcm_close,
++	.ioctl = &snd_pcm_lib_ioctl,
++	.hw_params = &snd_adsp_pcm_hw_params,
++	.hw_free = &snd_adsp_pcm_hw_free,
++	.prepare = &snd_adsp_pcm_prepare,
++	.trigger = &snd_adsp_pcm_trigger,
++	.pointer = &snd_adsp_pcm_pointer,
++	.ack = &snd_adsp_pcm_ack
++};
++
++/*******************************************************************
++ * Internal functions
++ * ****************************************************************/
++
++/** **************************************************************************
++ *  \brief	 Process information get from control structure
++ *
++ *  \param[in]	  eqz_params	 Equalizer parameters object
++ *  \param[in]	  eqz_ctr_params Equalizer parameters stored in control object
++ *  \param[in]	  flag		 Indicate playback or capture stream
++ *****************************************************************************/
++static void snd_adsp_get_eqz_params_from_control(
++		struct xf_adsp_equalizer_params *eqz_params,
++		struct xf_adsp_equalizer_params *eqz_ctr_params, bool flag)
++{
++	int filter_idx;
++
++	if (flag) {
++		if (eqz_ctr_params->eqz_type >= 0)
++			eqz_params->eqz_type = eqz_ctr_params->eqz_type;
++
++		for (filter_idx = 0; filter_idx < XA_REL_EQZ_FILTER_NUM;
++		     filter_idx++) {
++			if (eqz_ctr_params->p_coef.fc[filter_idx] >= 0)
++				eqz_params->p_coef.fc[filter_idx] =
++				  eqz_ctr_params->p_coef.fc[filter_idx];
++
++			if (eqz_ctr_params->p_coef.band_width[filter_idx] >= 0)
++				eqz_params->p_coef.band_width[filter_idx] =
++				eqz_ctr_params->p_coef.band_width[filter_idx];
++
++			if (eqz_ctr_params->p_coef.type[filter_idx] >= 0)
++				eqz_params->p_coef.type[filter_idx] =
++				  eqz_ctr_params->p_coef.type[filter_idx];
++
++			if (eqz_ctr_params->p_coef.gain_base[filter_idx] >= 0)
++				eqz_params->p_coef.gain_base[filter_idx] =
++				  eqz_ctr_params->p_coef.gain_base[filter_idx];
++
++			if (eqz_ctr_params->p_coef.gain[filter_idx] >= 0)
++				eqz_params->p_coef.gain[filter_idx] =
++				  eqz_ctr_params->p_coef.gain[filter_idx];
++		}
++		for (filter_idx = 0; filter_idx < XA_REL_EQZ_GRAPHIC_BAND_NUM;
++		     filter_idx++) {
++			if (eqz_ctr_params->g_coef.gain_g[filter_idx] >= 0)
++				eqz_params->g_coef.gain_g[filter_idx] =
++				  eqz_ctr_params->g_coef.gain_g[filter_idx];
++		}
++	} else {
++		memcpy(eqz_ctr_params, eqz_params, sizeof(*eqz_params));
++	}
++}
++
++/*******************************************************************
++ * ALSA ADSP Platform driver interface
++ * ****************************************************************/
++
++/** ****************************************************************************
++ *  \brief	 Register control interface and preallocate ALSA buffer
++ *
++ *  \param[in]	  runtime	Pointer to runtime PCM data
++ *  \retval	  0		Success
++ *  \retval	 -EINVAL	Cannot register control interface
++ ******************************************************************************/
++static int snd_adsp_pcm_new(struct snd_soc_pcm_runtime *runtime)
++{
++	int i = 0, err = 0;
++	int id;
++	struct snd_card *card;
++	struct snd_adsp_card *adsp_card;
++	int alsa_buf_sz = 0;
++
++	/* get sound card data */
++	card = runtime->card->snd_card;
++
++	/* get driver data */
++	adsp_card = snd_soc_dai_get_drvdata(runtime->cpu_dai);
++
++	/* get the ID of CPU DAI */
++	id = runtime->cpu_dai->id;
++
++	/* register control interfaces */
++	if (id == RDR_DAI_IDX0 || id == RDR_DAI_IDX1 ||
++	    id == RDR_DAI_IDX2 || id == RDR_DAI_IDX3) {
++		struct snd_kcontrol *kctl[RDR_CONTROL_NUM];
++		void *rdr_ctr[RDR_CONTROL_NUM] = {
++			&snd_adsp_playback_volume_control[id], /* PRQA S 1031 */
++			&snd_adsp_capture_volume_control[id],
++			&snd_adsp_playback_sample_rate_out_control[id],
++			&snd_adsp_capture_sample_rate_in_control[id],
++			&snd_adsp_playback_equalizer_control[id],
++			&snd_adsp_capture_equalizer_control[id],
++			&snd_adsp_playback_equalizer_switch_control[id],
++			&snd_adsp_capture_equalizer_switch_control[id],
++			&snd_adsp_playback_out_channel_control[id]
++		};
++
++		/* add basic control instance */
++		for (i = 0; i < RDR_CONTROL_NUM; i++) {
++			kctl[i] = snd_ctl_new1(rdr_ctr[i], adsp_card);
++			err = snd_ctl_add(card, kctl[i]);
++			if (err < 0)
++				return -EINVAL;
++		}
++
++		/* assign ALSA buffer size */
++		alsa_buf_sz = MAX_BUFFER_BYTES;
++
++		/* enable MIX feature from the 2nd playback/record stream */
++		if (adsp_card->ctr_if.mix_usage == MIX_UNUSED)
++			adsp_card->ctr_if.mix_usage = FIRST_RUN;
++		else if (adsp_card->ctr_if.mix_usage == FIRST_RUN)
++			adsp_card->ctr_if.mix_usage = SECOND_RUN;
++
++	} else {
++		struct snd_kcontrol *kctl[TDM_CONTROL_NUM];
++		void *tdm_ctr[TDM_CONTROL_NUM] = {
++			&snd_adsp_tdm_playback_volume_control,
++			&snd_adsp_tdm_playback_sample_rate_out_control,
++			&snd_adsp_tdm_capture_volume_control,
++			&snd_adsp_tdm_capture_sample_rate_in_control
++		};
++
++		/* add basic control instances */
++		for (i = 0; i < TDM_CONTROL_NUM; i++) {
++			kctl[i] = snd_ctl_new1(tdm_ctr[i], adsp_card);
++			err = snd_ctl_add(card, kctl[i]);
++			if (err < 0)
++				return -EINVAL;
++		}
++
++		/* assign ALSA buffer size */
++		alsa_buf_sz = TDM_MAX_BUFFER_BYTES;
++	}
++
++	return snd_pcm_lib_preallocate_pages_for_all(runtime->pcm,
++			SNDRV_DMA_TYPE_CONTINUOUS,
++			snd_dma_continuous_data(GFP_KERNEL),
++			alsa_buf_sz, alsa_buf_sz);
++}
++
++/* ****************************************************************************
++ * ALSA ADSP DAI register
++ * ***************************************************************************/
++
++/** callback function of platform driver */
++static struct snd_soc_platform_driver snd_adsp_platform = {
++	.pcm_new	= &snd_adsp_pcm_new, /* PRQA S 1053 *//* PRQA S 0674 */
++	.ops		= &snd_adsp_pcm_ops,
++};
++
++/** component information of driver */
++static const struct snd_soc_component_driver snd_adsp_component = {
++	.name		= "snd_adsp",		   /* PRQA S 1053 */
++};
++
++/** DAI information of ADSP ALSA driver */
++static struct snd_soc_dai_driver snd_adsp_dai[MAX_DAI_IDX] = {
++	{
++		/* PRQA S 1053 */
++		.id			= RDR_DAI_IDX0,
++		.name			= "adsp-dai.0",
++		.playback.stream_name   = "Playback0",
++		.capture.stream_name	= "Capture0",
++	},
++	{
++		.id			= RDR_DAI_IDX1,
++		.name			= "adsp-dai.1",
++		.playback.stream_name   = "Playback1",
++		.capture.stream_name	= "Capture1",
++	},
++	{
++		.id			= RDR_DAI_IDX2,
++		.name			= "adsp-dai.2",
++		.playback.stream_name   = "Playback2",
++		.capture.stream_name	= "Capture2",
++	},
++	{
++		.id			= RDR_DAI_IDX3,
++		.name			= "adsp-dai.3",
++		.playback.stream_name   = "Playback3",
++		.capture.stream_name	= "Capture3",
++	},
++	{
++		.id			= TDM_DAI_IDX,
++		.name			= "adsp-tdm-dai",
++		.playback.stream_name   = "TDM Playback",
++		.capture.stream_name	= "TDM Capture",
++	}
++};
++
++/** ***************************************************************************
++ *  \brief	 Register platform driver and ADSP ALSA sound card
++ *
++ *  \param[in]	  pdev		Pointer to platform driver data
++ *  \retval	  0		Success
++ *  \retval	 -ENOMEM	Cannot allocate driver's data
++ *  \retval	 -EINVAL	Cannot register platform driver or sound card
++ ****************************************************************************/
++static int snd_adsp_probe(struct platform_device *pdev)
++{
++	struct snd_adsp_card *adsp_card;
++	int i;
++
++	/* allocate a card data structure */
++	adsp_card = kmalloc(sizeof(*adsp_card), GFP_KERNEL);
++	if (!adsp_card)
++		return -ENOMEM;
++
++	/* init parameters */
++	memset(adsp_card, 0, sizeof(*adsp_card)); /* PRQA S 3200 */
++
++	/* PRQA S 3200 1*/
++	memset(&adsp_card->ctr_if, -1, sizeof(struct snd_adsp_control));
++
++	/* disable Equalizer for all streams */
++	for (i = 0; i < (MAX_DAI_IDX - 1); i++) {
++		adsp_card->ctr_if.eqz_switch[DIRECT_CAPTURE][i] = 0;
++		adsp_card->ctr_if.eqz_switch[DIRECT_PLAYBACK][i] = 0;
++	}
++
++	/* disable MIX function for all */
++	adsp_card->ctr_if.mix_usage = MIX_UNUSED;
++
++	/* save driver data */
++	dev_set_drvdata(&pdev->dev, adsp_card);
++
++	/* register platform device */
++	if (snd_soc_register_platform(&pdev->dev, &snd_adsp_platform) < 0) {
++		snd_soc_unregister_platform(&pdev->dev);
++		return -EINVAL;
++	}
++
++	/* fill format information of sound DAI driver for Rdr/Cap function */
++	for (i = 0; i < (MAX_DAI_IDX - 1); i++) {
++		snd_adsp_dai[i].playback.rates = SND_ADSP_SAMPLE_RATES;
++		snd_adsp_dai[i].playback.formats = SND_ADSP_PCM_WIDTHS;
++		snd_adsp_dai[i].playback.channels_min = MIN_CHANNEL;
++		snd_adsp_dai[i].playback.channels_max = MAX_CHANNEL;
++
++		snd_adsp_dai[i].capture.rates = SND_ADSP_SAMPLE_RATES;
++		snd_adsp_dai[i].capture.formats = SND_ADSP_PCM_WIDTHS;
++		snd_adsp_dai[i].capture.channels_min = MIN_CHANNEL;
++		snd_adsp_dai[i].capture.channels_max = MAX_CHANNEL;
++	}
++
++	/* fill format information of sound DAI driver for TDM function */
++	snd_adsp_dai[i].playback.rates = SND_ADSP_SAMPLE_RATES;
++	snd_adsp_dai[i].playback.formats = SND_ADSP_PCM_WIDTHS;
++	snd_adsp_dai[i].playback.channels_min = TDM_MIN_CHANNEL;
++	snd_adsp_dai[i].playback.channels_max = TDM_MAX_CHANNEL;
++
++	snd_adsp_dai[i].capture.rates = SND_ADSP_SAMPLE_RATES;
++	snd_adsp_dai[i].capture.formats = SND_ADSP_PCM_WIDTHS;
++	snd_adsp_dai[i].capture.channels_min = TDM_MIN_CHANNEL;
++	snd_adsp_dai[i].capture.channels_max = TDM_MAX_CHANNEL;
++
++	/* register CPU dai */
++	if (snd_soc_register_component(&pdev->dev, &snd_adsp_component,
++				       snd_adsp_dai,
++				       ARRAY_SIZE(snd_adsp_dai)) < 0) {
++		snd_soc_unregister_platform(&pdev->dev);
++		return -EINVAL;
++	}
++
++	dev_info(&pdev->dev, "probed\n");
++
++	/* success */
++	return 0;
++}
++
++/** **************************************************************************
++ *  \brief	 Unregister platform driver and ADSP ALSA sound card
++ *
++ *  \param[in]	pdev		Pointer platform driver data
++ *  \retval	0		Success
++ *  \retval	-EINVAL		Invalid driver's data
++ *****************************************************************************/
++static int snd_adsp_remove(struct platform_device *pdev)
++{
++	/* get ADSP sound card data */
++	struct snd_adsp_card *adsp_card = dev_get_drvdata(&pdev->dev);
++
++	if (!adsp_card)
++		return -ENODEV;
++
++	/* release the ADSP sound card */
++	kfree(adsp_card);
++
++	/* unregister platform driver */
++	snd_soc_unregister_component(&pdev->dev);
++	snd_soc_unregister_platform(&pdev->dev);
++
++	/* success */
++	return 0;
++}
++
++/** ADSP ALSA driver information */
++static const struct of_device_id snd_adsp_id[] = {
++	{ .compatible = "renesas,rcar_adsp_sound_gen3", },  /* PRQA S 1053 */
++};
++MODULE_DEVICE_TABLE(of, snd_adsp_id);
++
++/** platform driver of ADSP ALSA sound card */
++static struct platform_driver snd_adsp_driver = {
++	.driver	= {		 /* PRQA S 1053 */
++		.name	= "rcar_adsp_sound",
++		.of_match_table = snd_adsp_id,
++	},
++	.probe		= snd_adsp_probe,
++	.remove		= snd_adsp_remove,
++};
++module_platform_driver(snd_adsp_driver);		/* PRQA S 0651 */
++
++MODULE_AUTHOR("Renesas AudioDSP");
++MODULE_DESCRIPTION("Platform driver for ADSP");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:ADSP-PCM-AUDIO");
+diff --git a/sound/soc/adsp/xf-adsp-base.c b/sound/soc/adsp/xf-adsp-base.c
+new file mode 100644
+index 0000000..3ad9445
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-base.c
+@@ -0,0 +1,2259 @@
++/** ***************************************************************************
++ *\file		xf-adsp-base.c
++ *\brief	Source file for ADSP Base Control layer
++ *\addtogroup	ADSP Driver
++ ******************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ ******************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#include <linux/slab.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++
++#include "xf-adsp-base.h"
++
++#define XF_AUX_POOL_SIZE	(16)	/**< size of auxiliary pool*/
++#define XF_AUX_POOL_MSG_LENGTH	(256)	/**< size of auxiliary buffer   */
++
++#define XF_PROXY_ALIGN		(64)	/**< proxy alignment		*/
++
++/** \def XF_ALIGNED(size)
++ *  Get properly aligned buffer length
++ */
++#define XF_ALIGNED(size)\
++((((size) + XF_PROXY_ALIGN) - 1) & ~(XF_PROXY_ALIGN - 1)) /* PRQA S 3453 */
++
++#ifndef offset_of
++/** \def offset_of(type, member)
++ *  Return the offset of member in type structuer in byte
++ */
++#define offset_of(type, member)  \
++	((int)(long int)&(((const type *)(0))->member))	/* PRQA S 3453 */
++#endif
++
++/*************************************************
++ * Variable and and function declaration
++ * **********************************************/
++
++/** ADSP base control data */
++static struct xf_adsp_base *base;
++
++/* function declaration */
++static int xf_adsp_base_register_handle(void *private_data,
++					struct xf_callback_func *cb,
++					int comp_id);
++static inline struct xf_handle *xf_adsp_base_get_handle(int handle_id);
++static int xf_adsp_base_free_handle(int handle_id);
++static void xf_adsp_base_init_handle(void);
++static int xf_adsp_base_get_valid_handle(void);
++static int xf_send_and_receive(struct xf_message *msg);
++static int xf_response_thread(void *data);
++static void xf_buffer_put(struct xf_buffer *buffer);
++static u32 xf_buffer_length(struct xf_buffer *b);
++static struct xf_buffer *xf_buffer_get(struct xf_pool *pool);
++static void *xf_buffer_data(struct xf_buffer *b);
++static int xf_adsp_unregister(int comp_id);
++static int xf_adsp_register(char *name, int *comp_id);
++
++/*************************************************
++ * Helper function to process pool data
++ * **********************************************/
++
++/** ***********************************************************
++ *  \brief get buffer from given pool
++ *
++ *  \param[in]  pool	Data pool address
++ *  \retval	b	Pointer to buffer address in pool
++ **************************************************************/
++static struct xf_buffer *xf_buffer_get(struct xf_pool *pool)
++{
++	struct xf_buffer *b;
++
++	b = pool->free;
++	if (b) {
++		pool->free = b->link.next;
++		b->link.pool = pool;
++	}
++	return b;
++}
++
++/***********************************************************
++ *\brief return buffer back to pool
++ *
++ *\param[in]  buffer  Pointer to the buffer data
++ ************************************************************/
++static void xf_buffer_put(struct xf_buffer *buffer)
++{
++	struct xf_pool *pool = buffer->link.pool;
++
++	buffer->link.next = pool->free;
++	pool->free = buffer;
++}
++
++/***********************************************************
++ *\brief get the address of the given buffer data
++ *
++ *\param[in]	b		Pointer to the buffer data
++ *\retval	address		Address of buffer data
++ ************************************************************/
++static void *xf_buffer_data(struct xf_buffer *b)
++{
++	return b->address;
++}
++
++/************************************************************
++ *\brief get the length of the given buffer data
++ *
++ *\param[in]	b		Pointer to the buffer data
++ *\retval	length		Size of buffer data
++ ************************************************************/
++static u32 xf_buffer_length(struct xf_buffer *b)  /* PRQA S 3673 */
++{
++	return b->link.pool->length;
++}
++
++/************************************************************
++ *\brief set data to the given command message
++ *
++ *\param[out] m		Pointer to the command message
++ *\param[in]  id	Message ID
++ *\param[in]  opcode	Message opcode
++ *\param[in]  length	Message length
++ *\param[in]  buf	Pointer to the buffer data
++ *\param[in]  next	Pointer to the next message
++ *\retval     m		Pointer to the command message
++ ************************************************************/
++static inline struct xf_message *
++xf_create_msg(struct xf_message *m, u32 id, u32 opcode, u32 length, void *buf,
++	      struct xf_message *next)
++{
++	if (m) {
++		m->id = id;
++		m->opcode = opcode;
++		m->length = length;
++		m->buffer = buf;
++		m->next = next;
++	}
++
++	return m;
++}
++
++/*****************************************************************
++ *\brief synchronous send and wait for response message from proxy
++ *
++ *\param[in]	msg		Pointer to the command message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ ****************************************************************/
++static int xf_send_and_receive(struct xf_message *msg)
++{
++	int err;
++	int opcode = msg->opcode;
++
++	/* reset the base flag */
++	spin_lock(&base->lock);
++	base->base_flag = FALSE;
++	spin_unlock(&base->lock);
++
++	err = base->cmd.send(base->client, (void *)msg);
++	if (err != 0)
++		return err;
++
++	/* sleep and wait for the response wake up event */
++	if (wait_event_interruptible(base->base_wait,
++				     base->base_flag || base->err_flag)) {
++		return -EINVAL;
++	}
++
++	if (base->err_flag != 0) {
++		spin_lock(&base->lock);
++		base->err_flag = FALSE;
++		spin_unlock(&base->lock);
++		return -EINVAL;
++	}
++
++	/* save the response message */
++	/* PRQA S 3200 */
++	memcpy(msg, &base->base_msg, sizeof(struct xf_message));
++
++	/* check if the reponsed message is right */
++	if (msg->opcode != opcode)
++		return -EINVAL;
++
++	return 0;
++}
++
++/*************************************************************
++ *\brief send a message to proxy
++ *
++ *\param[in]	msg		Pointer to the command message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++static inline int xf_send(struct xf_message *msg)
++{
++	return base->cmd.send(base->client, (void *)msg);
++}
++
++/** ***********************************************************
++ *\brief receive message from proxy
++ *
++ *\param[in]	msg		Pointer to store the response message
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++static inline int xf_receive(struct xf_message *msg)
++{
++	/* do not wait here */
++	return base->cmd.recv(base->client, (void *)msg);
++}
++
++/** ***********************************************************
++ *\brief thread for receive response data
++ **************************************************************/
++static int xf_response_thread(void *data)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++	int id;
++
++	/* set polling to wait the response message */
++	spin_lock(&base->lock);
++	base->wait_flag = FALSE;
++	spin_unlock(&base->lock);
++
++	while (!kthread_should_stop()) {
++		if (base->cmd.poll(base->client, &base->wait_flag) != 0)
++			continue;
++
++		if (xf_receive(&msg) != 0)
++			continue;
++
++		/* get the handle id */
++		id = XF_AP_CLIENT(msg.id);
++
++		/* check the destination of the response message */
++		if (id == 0) {
++			/* message is from base control */
++			/* PRQA S 3200 1*/
++			memcpy(&base->base_msg, &msg,
++			       sizeof(struct xf_message));
++
++			spin_lock(&base->lock);
++			base->base_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			continue;
++		}
++
++		/* get handle data */
++		handle = xf_adsp_base_get_handle(id);
++
++		if (handle == 0)
++			continue;
++
++		switch (msg.opcode) {
++		case XF_EMPTY_THIS_BUFFER:	/* PRQA S 0594 */
++			handle->cb->empty_buf_done(handle->private_data,
++						   msg.opcode,
++						   msg.length,
++						   msg.buffer);
++			break;
++		case XF_FILL_THIS_BUFFER:	/* PRQA S 0594 */
++			handle->cb->fill_buf_done(handle->private_data,
++						  msg.opcode,
++						  msg.length,
++						  msg.buffer);
++			break;
++		case XF_SET_PARAM:		/* PRQA S 0594 4 */
++		case XF_GET_PARAM:
++		case XF_ROUTE:
++		case XF_UNROUTE:
++			/* message is from base control */
++			memcpy(&base->base_msg, &msg,
++			       sizeof(struct xf_message)); /* PRQA S 3200 */
++
++			spin_lock(&base->lock);
++			base->base_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			break;
++		default:
++			/* error has occurred */
++			handle->cb->event_handler(handle->private_data);
++
++			xf_adsp_base_free_handle(id); /* PRQA S 3200 */
++
++			spin_lock(&base->lock);
++			base->err_flag = TRUE;
++			spin_unlock(&base->lock);
++
++			wake_up(&base->base_wait);
++			break;
++		}
++	}
++
++	pr_info("ADSP base thread was exited\n");
++
++	do_exit(0);
++	return 0;
++}
++
++/*************************************************************
++ *	\brief register component to ADSP
++ *
++ *	\param[in]    name      Name string of component
++ *	\param[out]   comp_id   Store the registered component ID
++ *	\retval	      0         Success
++ *	\retval	      -EINVAL   Failed
++ **************************************************************/
++static int xf_adsp_register(char *name, int *comp_id)	/* PRQA S 3673 */
++{
++	struct xf_message msg;
++	struct xf_buffer *b = xf_buffer_get(base->aux_pool);
++	int err = 0;
++
++	msg.id = __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0));
++	msg.opcode = XF_REGISTER;
++	msg.length = strlen(name) + 1;
++	msg.buffer = xf_buffer_data(b);
++
++	/* copy identify name of ADSP component */
++	if (msg.length <= xf_buffer_length(b))
++		strncpy(msg.buffer, name, msg.length);	/* PRQA S 3200 */
++	else
++		strncpy(msg.buffer, name, xf_buffer_length(b));/* PRQA S 3200 */
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the registered component ID */
++	*comp_id = XF_MSG_SRC(msg.id);
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ * \brief unregister component from ADSP
++ * \param[in]	comp_id		Registered component ID
++ * \retval	0		Success
++ * \retval	-EINVAL		Failed
++ **************************************************************/
++static int xf_adsp_unregister(int comp_id)
++{
++	struct xf_message msg;
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), comp_id),
++		      XF_UNREGISTER, 0, NULL, NULL);	/* PRQA S 3200 */
++
++	return xf_send_and_receive(&msg);
++}
++
++/***************************************************************
++ * APIs for ADSP component helper
++ * ************************************************************/
++/** ***********************************************************
++ * \brief allocate memory pool from shared memory
++ * \param[in]   pool_size	Number of buffer need to allocate
++ * \param[in]   buf_length	Size of each buffer in bytes
++ * \retval	pool		Pointer to allocated pool
++ * \retval	-EINVAL		Invalid base data
++ * \retval	-ENOMEM		Out of memory resource
++ **************************************************************/
++struct xf_pool *xf_adsp_allocate_mem_pool(int pool_size, int buf_length)
++{
++	void *data;
++	u32 number;
++	struct xf_buffer *b;
++	struct xf_message msg;
++	struct xf_pool *pool;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return ERR_PTR(-EINVAL);	/* PRQA S 0306 */
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0)),
++		      XF_ALLOC,
++		      buf_length * pool_size, NULL, NULL); /* PRQA S 3200 */
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		return ERR_PTR(-ENOMEM);		/* PRQA S 0306 */
++
++	/* PRQA S 0306 1 */
++	pool = kmalloc(offset_of(struct xf_pool, buffer) +
++		       (pool_size * sizeof(struct xf_buffer)), GFP_KERNEL);
++
++	if (!pool)
++		return ERR_PTR(-ENOMEM);	/* PRQA S 0306 */
++
++	pool->length = buf_length;
++	pool->number = pool_size;
++	pool->p = msg.buffer;
++
++	number = pool_size;
++	for (pool->free = b = &pool->buffer[0], data = pool->p;
++	     number > 0; number--, b++) {	/* PRQA S 2462,3418,0489 */
++		/* set address of the buffer */
++		b->address = data;
++
++		/* fill buffer into free list */
++		if (number == 1)
++			b->link.next = NULL;
++		else
++			b->link.next = b + 1;		/* PRQA S 0489 */
++
++		/* advance data pointer in contigous buffer */
++		data += buf_length;		/* PRQA S 0550 */
++	}
++
++	return pool;
++}
++
++/** ***********************************************************
++ *\brief return memory to shared memory
++ *\param[in]	pool	Data pool address
++ *\retval	0	Success
++ *\retval	-EINVAL Invalid base or pool data
++ **************************************************************/
++int xf_adsp_free_mem_pool(struct xf_pool *pool)
++{
++	struct xf_message msg;
++
++	/* check the sane ADSP base pool data*/
++	if (!base || !pool)
++		return -EINVAL;
++
++	xf_create_msg(&msg, __XF_MSG_ID(__XF_AP_PROXY(0), __XF_DSP_PROXY(0)),
++		      XF_FREE, pool->number * pool->length,
++		      pool->p, NULL);		/* PRQA S 3200 */
++
++	xf_send_and_receive(&msg);		/* PRQA S 3200 */
++
++	kfree(pool);
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief get buffer from given pool
++ *
++ *\param[in]	pool	Data pool address
++ *\param[in]	index   Buffer index
++ *\retval	b	Pointer to buffer address in pool
++ *\retval	-EINVAL Invalid pool or index
++ **************************************************************/
++char *xf_adsp_get_data_from_pool(struct xf_pool *pool, int index)
++{
++	struct xf_buffer *buf[XF_BUF_POOL_SIZE] = {0};
++	char *data;
++	int i;
++
++	/* check the sane pool data*/
++	if (!pool)
++		return ERR_PTR(-EINVAL);		/* PRQA S 306 */
++
++	/* check the index is valid */
++	if (index > (pool->number - 1))
++		return ERR_PTR(-EINVAL);		/* PRQA S 306 */
++
++	/* get buffer from pool */
++	for (i = 0; i <= index; i++)
++		buf[i] = xf_buffer_get(pool);
++
++	/* get data from buffer */
++	data = xf_buffer_data(buf[index]);
++
++	/* return buffer to pool */
++	for (i = index; i >= 0; i--)
++		xf_buffer_put(buf[i]);
++
++	return data;
++}
++
++/** ***********************************************************
++ *\brief  send empty this buffer command to ADSP framework
++ *
++ *\param[in]	handle_id	ID of the registered handle
++ *\param[in]	buffer		Pointer to data buffer
++ *\param[in]	length		Size of buffer in bytes
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_empty_this_buffer(int handle_id, char *buffer, int length)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	/* submit message to port 0 of component */
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_EMPTY_THIS_BUFFER, length, buffer, NULL);
++
++	xf_send(&msg);		/* PRQA S 3200 */
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief  send fill this buffer command to ADSP framework
++ *
++ *\param[in]	handle_id	ID of the registered handle
++ *\param[in]	buffer		Pointer to data buffer
++ *\param[in]	length		Size of buffer in bytes
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_fill_this_buffer(int handle_id, char *buffer, int length)
++{
++	struct xf_message msg;
++	struct xf_handle *handle;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	/* submit message to port 1 of component */
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 1)),
++		      XF_FILL_THIS_BUFFER, length, buffer, NULL);
++
++	xf_send(&msg);		/* PRQA S 3200 */
++
++	return 0;
++}
++
++/** ***********************************************************
++ *\brief route data between two registered ADSP plugins
++ *
++ *\param[in]	src_handle_id	Handle ID of source plugin
++ *\param[in]	dst_handle_id	Handle ID of sink plugin
++ *\param[in]	buf_cnt		Number of buffer in tunnel
++ *\param[in]	buf_size	Size of each buffer in tunnel
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int
++xf_adsp_route(int src_handle_id, int dst_handle_id, int buf_cnt, int buf_size)
++{
++	struct xf_route_port_msg *route_msg;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	struct xf_handle *dst_handle, *src_handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	/* get handle data */
++	dst_handle = xf_adsp_base_get_handle(dst_handle_id);
++	src_handle = xf_adsp_base_get_handle(src_handle_id);
++
++	if (!dst_handle || !src_handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	route_msg = xf_buffer_data(b);
++
++	/* route information */
++	route_msg->dst = __XF_PORT_SPEC2(dst_handle->comp_id, 0);
++	route_msg->alloc_align = 4;
++	route_msg->alloc_number = buf_cnt;
++	route_msg->alloc_size = buf_size;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, src_handle_id),
++				  __XF_PORT_SPEC2(src_handle->comp_id, 1)),
++		      XF_ROUTE, sizeof(*route_msg), route_msg, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief set a single parameter
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\param[in]	index		Sub-command index of parameter
++ *\param[in]	value		the setting value
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_set_param(int handle_id, int index, int value)
++{
++	struct xf_message msg;
++	struct xf_buffer *b;
++	struct xf_set_param_msg *msg_params;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	msg_params->item[0].id = index;
++	msg_params->item[0].value = value;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(1), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief get a single parameter
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\param[in]	index		Sub-command index of parameter
++ *\param[out]	value		Store the getting value
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_get_param(int handle_id, int index, int *value)
++{
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base and value data */
++	if (!base || !value)
++		return -EINVAL;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	msg_params->c.id[0] = index;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(1), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	*value = msg_params->r.value[0];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/***************************************************
++ * APIs for ADSP base control
++ * ************************************************/
++
++/** ***********************************************************
++ *\brief initialize ADSP base's instance
++ *
++ *\retval 0	  Success
++ *\retval -EINVAL ADSP base's instance has been initialized
++ *\retval -ENOMEM Cannot allocate memory for ADSP base
++ *\retval -EBUSY  Cannot register client to proxy
++ **************************************************************/
++int xf_adsp_base_create(struct xf_adsp_base_cmd *cmd)
++{
++	int err = 0;
++
++	if (base != 0)
++		return -EINVAL;
++
++	if (!cmd || !cmd->recv || !cmd->send || !cmd->poll ||
++	    !cmd->client_register || !cmd->client_unregister)
++		return -EINVAL;
++
++	base = kmalloc(sizeof(*base), GFP_KERNEL);
++	if (!base)
++		return -ENOMEM;
++
++	memset(base, 0, sizeof(struct xf_adsp_base));	/* PRQA S 3200 */
++
++	/* store the proxy command */
++	memcpy(&base->cmd, cmd, sizeof(struct xf_adsp_base_cmd));
++
++	/* create client to connect from proxy driver */
++	err = base->cmd.client_register(&base->client);
++	if (err != 0)
++		goto err3;		/* PRQA S 2001 */
++
++	/* initialize waiting queue */
++	init_waitqueue_head(&base->base_wait);
++
++	/* initialize handle */
++	xf_adsp_base_init_handle();
++
++	/* create thread to get the responsed message from proxy */
++	base->rsp_thread = kthread_run(&xf_response_thread,
++				       (void *)base, "adsp base");
++
++	if (base->rsp_thread != 0) {
++		pr_info("ADSP base thread has been started.\n");
++	} else {
++		pr_info("Failed in create base thread\n");
++		err = -ENOMEM;
++		goto err2;		/* PRQA S 2001 */
++	}
++
++	/* allocate auxiliary pool for component usage */
++	base->aux_pool = xf_adsp_allocate_mem_pool(
++					XF_AUX_POOL_SIZE,
++					XF_ALIGNED(XF_AUX_POOL_MSG_LENGTH));
++
++	if (IS_ERR(base->aux_pool)) {		/* PRQA S 306 */
++		err = -ENOMEM;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	pr_info("ADSP base was created\n");
++	return 0;
++
++err1:
++	/* cancel the waitting queue */
++	spin_lock(&base->lock);
++	base->wait_flag = TRUE;
++	spin_unlock(&base->lock);
++
++	/* stop thread inadvance */
++	kthread_stop(base->rsp_thread);
++
++err2:
++	base->cmd.client_unregister(base->client);
++
++err3:
++	kfree(base);
++	base = NULL;
++
++	return err;
++}
++EXPORT_SYMBOL(xf_adsp_base_create);		/* PRQA S 0651 */
++
++/** ***********************************************************
++ *\brief deinitialize ADSP base's instance
++ *
++ *\retval	 0	   Success
++ *\retval	 -EINVAL Invalid ADSP base's instance
++ **************************************************************/
++int xf_adsp_base_destroy(void)
++{
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	/* free auxiliary pool to shared memory */
++	xf_adsp_free_mem_pool(base->aux_pool);		/* PRQA S 3200 */
++
++	/* cancel wait the response message, go to stop process */
++	spin_lock(&base->lock);
++	base->wait_flag = TRUE;
++	spin_unlock(&base->lock);
++
++	/* stop response thread */
++	kthread_stop(base->rsp_thread);
++
++	/* unregister client */
++	base->cmd.client_unregister(base->client);
++
++	kfree(base);
++	base = NULL;
++
++	pr_info("ADSP base was destroyed\n");
++	return 0;
++}
++EXPORT_SYMBOL(xf_adsp_base_destroy);		/* PRQA S 0651 */
++
++/** ***********************************************************
++ *	\brief initialize handle instance
++ **************************************************************/
++static inline void xf_adsp_base_init_handle(void)
++{
++	int i;
++
++	for (i = 0; i < MAX_HANDLE; i++)
++		base->handle[i] = NULL;
++}
++
++/** ***********************************************************
++ *\brief get the next available handle ID for register
++ *
++ *\retval -1		Unavailable handle ID
++ *\retval 0 to 255	Available handle ID
++ **************************************************************/
++static inline int xf_adsp_base_get_valid_handle(void)
++{
++	int id = -1;
++	int i;
++
++	for (i = 0; i < MAX_HANDLE; i++) {
++		/* get the id of the first available handler */
++		if (!base->handle[i]) {
++			id = i;
++			break;
++		}
++	}
++
++	return id;
++}
++
++/** ***********************************************************
++ *\brief register a handle instance for component usage
++ *
++ *\param[in]	 private_data	Private data of this component
++ *\param[in]	 cb		Callback function
++ *\param[in]	 comp_id	ID of register component
++ *\retval	 id		ID of registered handle
++ *\retval	 -EINVAL	Cannot get the handle instance
++ *\retval	 -ENOMEM	Cannot allocate handle memory
++ **************************************************************/
++static int xf_adsp_base_register_handle(void *private_data,
++					struct xf_callback_func *cb,
++					int comp_id)
++{
++	struct xf_handle *handle;
++	int id;
++
++	/* get the next handle id */
++	id = xf_adsp_base_get_valid_handle();
++
++	/* check available handle in base */
++	if (id < 0)
++		return -EINVAL;
++
++	/* allocate handle data */
++	handle = kmalloc(sizeof(*handle), GFP_KERNEL);
++	if (!handle)
++		return -ENOMEM;
++
++	/* save handle data */
++	handle->private_data = private_data;
++	handle->cb = cb;
++	handle->comp_id = comp_id;
++
++	/* save the hanle data */
++	base->handle[id] = handle;
++
++	/* return the id numbering in base handle */
++	return (id + 1);
++}
++
++/** ***********************************************************
++ *\brief  get handle instance from handle ID
++ *
++ *\param[in]	 handle_id	ID of registered handle
++ *\retval	 handle		Pointer to handle instance
++ **************************************************************/
++static inline struct xf_handle *xf_adsp_base_get_handle(int handle_id)
++{
++	return base->handle[handle_id - 1];
++}
++
++/** ***********************************************************
++ *\brief free the registered handle instance
++ *
++ *\param[in]	handle_id	ID of registered handle
++ *\retval	0		Success
++ *\retval	-EINVAL		Invalid handle ID
++ **************************************************************/
++static int xf_adsp_base_free_handle(int handle_id)
++{
++	if (handle_id < 1 || handle_id > MAX_HANDLE)
++		return -EINVAL;
++
++	kfree(base->handle[handle_id - 1]);
++	base->handle[handle_id - 1] = NULL;
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Renderer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Renderer parameters
++ *
++ *\param[in]	renderer	Pointer to Renderer component
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++int xf_adsp_renderer_set_params(struct xf_adsp_renderer *renderer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_renderer_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	params = &renderer->params;
++
++	/* get Renderer's handle data */
++	handle = xf_adsp_base_get_handle(renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_CHANNELS;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_OUT_CHANNELS;
++	msg_params->item[i++].value = params->out_channel;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_MIX_CONTROL;
++	msg_params->item[i++].value = params->mix_ctrl;
++
++	msg_params->item[i].id = XA_RDR_CONFIG_PARAM_STATE;
++	msg_params->item[i++].value = params->state;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Renderer parameters
++ *
++ *\param[in]	renderer	Pointer to Renderer component
++ *\retval	0		Success
++ *\retval	-EINVAL		Failed
++ **************************************************************/
++/* PRQA S 1505 */
++int xf_adsp_renderer_get_params(struct xf_adsp_renderer *renderer)
++{
++	struct xf_adsp_renderer_params *rdr_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	rdr_params = &renderer->params;
++
++	/* get Renderer's handle data */
++	handle = xf_adsp_base_get_handle(renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_CHANNELS;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_OUT_CHANNELS;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_MIX_CONTROL;
++	msg_params->c.id[i++] = XA_RDR_CONFIG_PARAM_STATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	rdr_params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	rdr_params->channel = msg_params->r.value[i++];
++	rdr_params->pcm_width = msg_params->r.value[i++];
++	rdr_params->frame_size = msg_params->r.value[i++];
++	rdr_params->dev1 = msg_params->r.value[i++];
++	rdr_params->dev2 = msg_params->r.value[i++];
++	rdr_params->dma1 = msg_params->r.value[i++];
++	rdr_params->dma2 = msg_params->r.value[i++];
++	rdr_params->out_rate = msg_params->r.value[i++];
++	rdr_params->vol_rate = msg_params->r.value[i++];
++	rdr_params->out_channel = msg_params->r.value[i++];
++	rdr_params->mix_ctrl = msg_params->r.value[i++];
++	rdr_params->state = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Renderer component
++ *
++ *\param[in,out]  renderer	Pointer to the registered component
++ *\param[in]	  cb		Callback function
++ *\param[in]	  private_data	Private data
++ *\retval	  0		Success
++ *\retval	 -EINVAL	Invalid base instance or register fail
++ *\retval	 -ENOMEM	Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_renderer_create(struct xf_adsp_renderer **renderer,
++			    struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_renderer *rdr;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	rdr = kmalloc(sizeof(*rdr), GFP_KERNEL);
++	if (!rdr)
++		return -ENOMEM;
++
++	memset(rdr, 0, sizeof(struct xf_adsp_renderer)); /* PRQA S 3200 */
++
++	/* register renderer component */
++	err = xf_adsp_register("renderer", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register Renderer to ADSP base control */
++	rdr->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (rdr->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from Renderer plugin */
++	err = xf_adsp_renderer_get_params(rdr);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save renderer compoent data */
++	*renderer = rdr;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(rdr);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Renderer component
++ *
++ *\param[in]	 renderer	Pointer to Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_renderer_destroy(struct xf_adsp_renderer *renderer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !renderer)
++		return -EINVAL;
++
++	handle_id = renderer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(renderer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Capture component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Capture parameters
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++int xf_adsp_capture_set_params(struct xf_adsp_capture *capture)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_capture_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	params = &capture->params;
++
++	/* get Capture's handle data */
++	handle = xf_adsp_base_get_handle(capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_CHANNELS;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	msg_params->item[i].id = XA_CAP_CONFIG_PARAM_STATE;
++	msg_params->item[i++].value = params->state;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Capture parameters
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++/* PRQA S 1505 */
++int xf_adsp_capture_get_params(struct xf_adsp_capture *capture)
++{
++	struct xf_adsp_capture_params *cap_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	cap_params = &capture->params;
++
++	/* get Capture's handle data */
++	handle = xf_adsp_base_get_handle(capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 11 1*/
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_CHANNELS;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->c.id[i++] = XA_CAP_CONFIG_PARAM_STATE;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	cap_params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 11 */
++	cap_params->channel = msg_params->r.value[i++];
++	cap_params->pcm_width = msg_params->r.value[i++];
++	cap_params->frame_size = msg_params->r.value[i++];
++	cap_params->dev1 = msg_params->r.value[i++];
++	cap_params->dev2 = msg_params->r.value[i++];
++	cap_params->dma1 = msg_params->r.value[i++];
++	cap_params->dma2 = msg_params->r.value[i++];
++	cap_params->out_rate = msg_params->r.value[i++];
++	cap_params->vol_rate = msg_params->r.value[i++];
++	cap_params->state = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Capture component
++ *
++ *\param[in,out]  capture	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Capture instance
++ *****************************************************************************/
++int xf_adsp_capture_create(struct xf_adsp_capture **capture,
++			   struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_capture *cap;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	cap = kmalloc(sizeof(*cap), GFP_KERNEL);
++	if (!cap)
++		return -ENOMEM;
++
++	memset(cap, 0, sizeof(struct xf_adsp_capture));	/* PRQA S 3200 */
++
++	/* register capture component */
++	err = xf_adsp_register("capture", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register capture to ADSP base control */
++	cap->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (cap->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from capture plugin */
++	err = xf_adsp_capture_get_params(cap);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save capture compoent data */
++	*capture = cap;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);	/* PRQA S 3200 */
++
++err2:
++	kfree(cap);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Capture component
++ *
++ *\param[in]	 capture	 Pointer to Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Capture data
++ **************************************************************/
++int xf_adsp_capture_destroy(struct xf_adsp_capture *capture) /* PRQA S 3673 */
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !capture)
++		return -EINVAL;
++
++	handle_id = capture->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);	/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);	/* PRQA S 3200 */
++
++exit:
++	kfree(capture);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for Equalizer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP Equalizer parameters
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++int xf_adsp_equalizer_set_params(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_equalizer_params    *params;
++	struct xf_buffer    *b;
++	int i, n;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	params = &equalizer->params;
++
++	/* get Equalizer's handle data */
++	handle = xf_adsp_base_get_handle(equalizer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_COEF_FS;
++	msg_params->item[i++].value = params->rate;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_CH;
++	msg_params->item[i++].value = params->channel;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_EQZ_CONFIG_PARAM_EQZ_TYPE;
++	msg_params->item[i++].value = params->eqz_type;
++
++	if (params->eqz_type == XA_REL_EQZ_TYPE_PARAMETRIC) {
++		struct xf_equalizer_parametric_coef *coef = &params->p_coef;
++
++		for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE + n;
++			msg_params->item[i++].value = coef->type[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC + n;
++			msg_params->item[i++].value = coef->fc[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW + n;
++			msg_params->item[i++].value = coef->band_width[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA + n;
++			msg_params->item[i++].value = coef->gain[n];
++
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA + n;
++			msg_params->item[i++].value = coef->gain_base[n];
++		}
++	} else {
++		struct xf_equalizer_graphic_coef *coef = &params->g_coef;
++
++		for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++) {
++			msg_params->item[i].id =
++				XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA + n;
++			msg_params->item[i++].value = coef->gain_g[n];
++		}
++	}
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, equalizer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP Equalizer parameters
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_equalizer_get_params(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_adsp_equalizer_params *eqz_params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i, n;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	eqz_params = &equalizer->params;
++
++	/* get Equalizer's handle data */
++	handle = xf_adsp_base_get_handle(equalizer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_COEF_FS; /* PRQA S 3440 4 */
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_CH;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_EQZ_TYPE;
++
++	for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++		/* PRQA S 3440 5 */
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA + n;
++
++		msg_params->c.id[i++] =
++			XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA + n;
++	}
++
++	for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++)
++		/* PRQA S 3440 1 */
++		msg_params->c.id[i++] = XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA + n;
++
++	/* PRQA S 3200 2 */
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, equalizer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	eqz_params->rate = msg_params->r.value[i++];	/* PRQA S 3440 4 */
++	eqz_params->channel = msg_params->r.value[i++];
++	eqz_params->pcm_width = msg_params->r.value[i++];
++	eqz_params->eqz_type = msg_params->r.value[i++];
++
++	for (n = 0; n < XA_REL_EQZ_FILTER_NUM; n++) {
++		/* PRQA S 3440 5 */
++		eqz_params->p_coef.type[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.fc[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.band_width[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.gain[n] = msg_params->r.value[i++];
++		eqz_params->p_coef.gain_base[n] = msg_params->r.value[i++];
++	}
++
++	for (n = 0; n < XA_REL_EQZ_GRAPHIC_BAND_NUM; n++) {
++		/* PRQA S 3440 1 */
++		eqz_params->g_coef.gain_g[n] = msg_params->r.value[i++];
++	}
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create Equalizer component
++ *
++ *\param[in,out]  equalizer	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Equalier instance
++ *****************************************************************************/
++int xf_adsp_equalizer_create(struct xf_adsp_equalizer **equalizer,
++			     struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_equalizer *eqz;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	eqz = kmalloc(sizeof(*eqz), GFP_KERNEL);
++	if (!eqz)
++		return -ENOMEM;
++
++	memset(eqz, 0, sizeof(struct xf_adsp_equalizer)); /* PRQA S 3200 */
++
++	/* register equalizer component */
++	err = xf_adsp_register("equalizer", &comp_id);
++	if (err != 0)
++		goto err2;			/* PRQA S 2001 */
++
++	/* register equalizer to ADSP base control */
++	eqz->handle_id = xf_adsp_base_register_handle(private_data,
++						      cb, comp_id);
++
++	if (eqz->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;			/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from equalizer plugin */
++	err = xf_adsp_equalizer_get_params(eqz);
++	if (err != 0)
++		goto err1;			/* PRQA S 2001 */
++
++	/* save equalizer compoent data */
++	*equalizer = eqz;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(eqz);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP Equalizer component
++ *
++ *\param[in]	 equalizer	 Pointer to Equalizer component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Equalizer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_equalizer_destroy(struct xf_adsp_equalizer *equalizer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base and Equalizer data */
++	if (!base || !equalizer)
++		return -EINVAL;
++
++	handle_id = equalizer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);	/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);	/* PRQA S 3200 */
++
++exit:
++	kfree(equalizer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for TDM Renderer component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP TDM Renderer parameters
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++int xf_adsp_tdm_renderer_set_params(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_tdm_renderer_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	params = &tdm_renderer->params;
++
++	/* get TDM Renderer's handle data */
++	handle = xf_adsp_base_get_handle(tdm_renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->item[i++].value = params->ch_mode;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP TDM Renderer parameters
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_tdm_renderer_get_params(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_adsp_tdm_renderer_params *params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	params = &tdm_renderer->params;
++
++	/* get TDM Renderer's handle data */
++	handle = xf_adsp_base_get_handle(tdm_renderer->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUTPUT1;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUTPUT2;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_renderer->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	params->ch_mode = msg_params->r.value[i++];
++	params->pcm_width = msg_params->r.value[i++];
++	params->frame_size = msg_params->r.value[i++];
++	params->dev1 = msg_params->r.value[i++];
++	params->dev2 = msg_params->r.value[i++];
++	params->dma1 = msg_params->r.value[i++];
++	params->dma2 = msg_params->r.value[i++];
++	params->out_rate = msg_params->r.value[i++];
++	params->vol_rate = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create TDM Renderer component
++ *
++ *\param[in,out]  tdm_renderer	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_tdm_renderer_create(struct xf_adsp_tdm_renderer **tdm_renderer,
++				struct xf_callback_func *cb,
++				void *private_data)
++{
++	struct xf_adsp_tdm_renderer *tdm_rdr;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	tdm_rdr = kmalloc(sizeof(*tdm_rdr), GFP_KERNEL);
++	if (!tdm_rdr)
++		return -ENOMEM;
++
++	/* PRQA S 3200 */
++	memset(tdm_rdr, 0, sizeof(struct xf_adsp_tdm_renderer));
++
++	/* register TDM Renderer component */
++	err = xf_adsp_register("tdm-renderer", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register TDM Renderer to ADSP base control */
++	tdm_rdr->handle_id = xf_adsp_base_register_handle(private_data,
++							  cb, comp_id);
++
++	if (tdm_rdr->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from plugin */
++	err = xf_adsp_tdm_renderer_get_params(tdm_rdr);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save compoent data */
++	*tdm_renderer = tdm_rdr;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(tdm_rdr);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP TDM Renderer component
++ *
++ *\param[in]	 tdm_renderer	Pointer to TDM Renderer component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 1*/
++int xf_adsp_tdm_renderer_destroy(struct xf_adsp_tdm_renderer *tdm_renderer)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_renderer)
++		return -EINVAL;
++
++	handle_id = tdm_renderer->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(tdm_renderer);
++
++	return 0;
++}
++
++/***********************************************************************
++ * APIs for TDM Capture component
++ * ********************************************************************/
++
++/** ***********************************************************
++ *\brief  set ADSP TDM Capture parameters
++ *
++ *\param[in]	 tdm_capture	Pointer to TDM Capture component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++int xf_adsp_tdm_capture_set_params(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_message msg;
++	struct xf_set_param_msg *msg_params;
++	struct xf_adsp_tdm_capture_params *params;
++	struct xf_buffer *b;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	params = &tdm_capture->params;
++
++	/* get TDM Capture's handle data */
++	handle = xf_adsp_base_get_handle(tdm_capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->item[i++].value = params->in_rate;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->item[i++].value = params->ch_mode;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->item[i++].value = params->pcm_width;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->item[i++].value = params->frame_size;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->item[i++].value = params->dev1;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->item[i++].value = params->dev2;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->item[i++].value = params->dma1;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->item[i++].value = params->dma2;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->item[i++].value = params->out_rate;
++
++	msg_params->item[i].id = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++	msg_params->item[i++].value = params->vol_rate;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_SET_PARAM, XF_SET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  get ADSP TDM Capture parameters
++ *
++ *\param[in]	 tdm_capture	Pointer to TDM Capture component
++ *\retval	 0		Success
++ *\retval	 -EINVAL	Failed
++ **************************************************************/
++/* PRQA S 1505 1*/
++int xf_adsp_tdm_capture_get_params(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_adsp_tdm_capture_params *params;
++	struct xf_message msg;
++	struct xf_buffer *b;
++	union xf_get_param_msg *msg_params;
++	int i;
++	struct xf_handle *handle;
++	int err = 0;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	params = &tdm_capture->params;
++
++	/* get TDM Capture's handle data */
++	handle = xf_adsp_base_get_handle(tdm_capture->handle_id);
++	if (!handle)
++		return -EINVAL;
++
++	b = xf_buffer_get(base->aux_pool);
++	msg_params = xf_buffer_data(b);
++
++	i = 0;
++	/* PRQA S 3440 13 1*/
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_INPUT1;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_INPUT2;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE;
++	msg_params->c.id[i++] = XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE;
++
++	/* PRQA S 3200 2*/
++	xf_create_msg(&msg,
++		      __XF_MSG_ID(__XF_AP_CLIENT(0, tdm_capture->handle_id),
++				  __XF_PORT_SPEC2(handle->comp_id, 0)),
++		      XF_GET_PARAM, XF_GET_PARAM_CMD_LEN(i), msg_params, NULL);
++
++	err = xf_send_and_receive(&msg);
++	if (err != 0)
++		goto exit;		/* PRQA S 2001 */
++
++	/* save the received parameters */
++	i = 0;
++	params->in_rate = msg_params->r.value[i++];	/* PRQA S 3440 13 */
++	params->ch_mode = msg_params->r.value[i++];
++	params->pcm_width = msg_params->r.value[i++];
++	params->frame_size = msg_params->r.value[i++];
++	params->dev1 = msg_params->r.value[i++];
++	params->dev2 = msg_params->r.value[i++];
++	params->dma1 = msg_params->r.value[i++];
++	params->dma2 = msg_params->r.value[i++];
++	params->out_rate = msg_params->r.value[i++];
++	params->vol_rate = msg_params->r.value[i++];
++
++exit:
++	/* return msg to pool */
++	xf_buffer_put(b);
++
++	return err;
++}
++
++/** **************************************************************************
++ *\brief  create TDM Capture component
++ *
++ *\param[in,out]  tdm_capture	 Pointer to the registered component
++ *\param[in]	  cb		 Callback function
++ *\param[in]	  private_data	 Private data
++ *\retval	  0		 Success
++ *\retval	  -EINVAL	 Invalid base instance or register fail
++ *\retval	  -ENOMEM	 Cannot allocate Renderer instance
++ *****************************************************************************/
++int xf_adsp_tdm_capture_create(struct xf_adsp_tdm_capture **tdm_capture,
++			       struct xf_callback_func *cb, void *private_data)
++{
++	struct xf_adsp_tdm_capture *tdm_cap;
++	int err;
++	int comp_id;
++
++	/* check the sane ADSP base data */
++	if (!base)
++		return -EINVAL;
++
++	tdm_cap = kmalloc(sizeof(*tdm_cap), GFP_KERNEL);
++	if (!tdm_cap)
++		return -ENOMEM;
++
++	/* PRQA S 3200 */
++	memset(tdm_cap, 0, sizeof(struct xf_adsp_tdm_capture));
++
++	/* register TDM Capture component */
++	err = xf_adsp_register("tdm-capture", &comp_id);
++	if (err != 0)
++		goto err2;		/* PRQA S 2001 */
++
++	/* register TDM Capture to ADSP base control */
++	tdm_cap->handle_id = xf_adsp_base_register_handle(private_data,
++							  cb, comp_id);
++
++	if (tdm_cap->handle_id <= 0) {
++		err = -EINVAL;
++		goto err1;		/* PRQA S 2001 */
++	}
++
++	/* get the default parameter from plugin */
++	err = xf_adsp_tdm_capture_get_params(tdm_cap);
++	if (err != 0)
++		goto err1;		/* PRQA S 2001 */
++
++	/* save compoent data */
++	*tdm_capture = tdm_cap;
++
++	return 0;
++
++err1:
++	xf_adsp_unregister(comp_id);		/* PRQA S 3200 */
++
++err2:
++	kfree(tdm_cap);
++
++	return err;
++}
++
++/** ***********************************************************
++ *\brief  deinitialize ADSP TDM Capture component
++ *
++ *\param[in]	 tdm_capture	 Pointer to TDM Capture component
++ *\retval	 0		 Success
++ *\retval	 -EINVAL	 Invalid base or Renderer data
++ **************************************************************/
++/* PRQA S 3673 */
++int xf_adsp_tdm_capture_destroy(struct xf_adsp_tdm_capture *tdm_capture)
++{
++	struct xf_handle *handle;
++	int handle_id;
++
++	/* check the sane ADSP base data */
++	if (!base || !tdm_capture)
++		return -EINVAL;
++
++	handle_id = tdm_capture->handle_id;
++
++	handle = xf_adsp_base_get_handle(handle_id);
++	if (!handle)
++		goto exit;		/* PRQA S 2001 */
++
++	/* unregister component */
++	xf_adsp_unregister(handle->comp_id);		/* PRQA S 3200 */
++
++	/* free handle data from base control */
++	xf_adsp_base_free_handle(handle_id);		/* PRQA S 3200 */
++
++exit:
++	kfree(tdm_capture);
++
++	return 0;
++}
+diff --git a/sound/soc/adsp/xf-adsp-base.h b/sound/soc/adsp/xf-adsp-base.h
+new file mode 100644
+index 0000000..27eb084
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-base.h
+@@ -0,0 +1,275 @@
++/** *************************************************************************
++ *\file		xf-adsp-base.h
++ *\brief	Header file for ADSP Base Control layer
++ *\addtogroup	ADSP Driver
++ ****************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ ****************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_BASE_H
++#define __XF_ADSP_BASE_H
++
++#include "xf-adsp-config.h"
++#include <adsp_drv/xf-adsp-drv-ext.h>
++
++#define XF_BUF_POOL_SIZE	(4)	 /**< number of buffer in a data pool */
++
++/**< maximum number of DSP component can be registered */
++#define MAX_HANDLE		(256)
++
++/* define boolean */
++#define TRUE			(1)
++#define FALSE			(0)
++
++/** \struct xf_callback_func
++ *  \brief  callback function for ADSP's response message
++ */
++struct xf_callback_func {
++	/** callback for empty buffer done message */
++	int (*empty_buf_done)(void *data, int opcode, int length, char *buffer);
++
++	/** callback for fill buffer done message */
++	int (*fill_buf_done)(void *data, int opcode, int length, char *buffer);
++
++	/** callback for event handler */
++	int (*event_handler)(void *data);
++};
++
++/** \struct xf_adsp_renderer_params
++ *  \brief  parameter structure for Renderer component
++ */
++struct xf_adsp_renderer_params {
++	int	 channel;	/**< channel number		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++	int	 out_channel;	/**< output channels		*/
++	int	 mix_ctrl;	/**< mix control flag		*/
++	int	 state;		/**< operation state		*/
++};
++
++/** \struct xf_adsp_renderer
++ *  \brief  Renderer component structure
++ */
++struct xf_adsp_renderer {
++	struct xf_adsp_renderer_params   params; /**< parameter structure*/
++	struct xf_pool   *buf_pool;  /**< buffer pool for data transfer  */
++	int		 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_adsp_capture_params
++ *\brief  parameter structure of Capture component
++ */
++struct xf_adsp_capture_params {
++	int	 channel;	/**< channel number		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++	int	 state;		/**< operation state		*/
++};
++
++/** \struct xf_adsp_capture
++ *  \brief  Capture component structure
++ */
++struct xf_adsp_capture {
++	struct xf_adsp_capture_params	params;	 /**< parameter structuer*/
++	struct xf_pool   *buf_pool;  /**< buffer pool for data transfer  */
++	int		 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_equalizer_parametric_coef
++ *\brief  Parametric Equalizer type's parameters
++ */
++struct xf_equalizer_parametric_coef {
++	int  type[XA_REL_EQZ_FILTER_NUM];		/**< Filter type */
++	int  fc[XA_REL_EQZ_FILTER_NUM];	  /**< Filter center frequency */
++	int  gain[XA_REL_EQZ_FILTER_NUM];	/**< Filter gain */
++	int  band_width[XA_REL_EQZ_FILTER_NUM];  /**< Filter band width	  */
++	int  gain_base[XA_REL_EQZ_FILTER_NUM];   /**< Filter base gain	  */
++};
++
++/** \struct xf_equalizer_graphic_coef
++ *  \brief  Graphic Equalizer type's parameters
++ */
++struct xf_equalizer_graphic_coef {
++	int  gain_g[XA_REL_EQZ_GRAPHIC_BAND_NUM];/**< Graphic equalizer gain */
++};
++
++/** \struct xf_adsp_equalizer_params
++ *\brief  Equalizer parameters
++ */
++struct xf_adsp_equalizer_params {
++	int		 channel;	/**< channel number	 */
++	int		 pcm_width;	/**< PCM width		 */
++	int		 rate;		/**< sampling rate	 */
++	int		 eqz_type;	/**< Equalizer type	 */
++	struct xf_equalizer_parametric_coef  p_coef; /**< Parametric params */
++	struct xf_equalizer_graphic_coef g_coef; /**< Graphic params */
++};
++
++/** \struct xf_adsp_equalizer
++ *  \brief  Equalizer component's structure
++ */
++struct xf_adsp_equalizer {
++	struct xf_adsp_equalizer_params   params;/**< Equalizer parameters   */
++	struct xf_pool	  *buf_pool;  /**< buffer pool for transfer data  */
++	int		  handle_id; /**< ID of registered handle	*/
++};
++
++/** \struct xf_adsp_tdm_renderer_params
++ *  \brief  parameter structure for TDM Renderer component
++ */
++struct xf_adsp_tdm_renderer_params {
++	int		 ch_mode;	/**< channel mode		*/
++	int		 pcm_width;	/**< PCM width			*/
++	int		 frame_size;	/**< frame size			*/
++	int		 in_rate;	/**< input sampling rate	*/
++	int		 out_rate;	/**< output sampling rate	*/
++	int		 vol_rate;	/**< volume rate		*/
++	int		 dev1;		/**< 1st device index		*/
++	int		 dev2;		/**< 2nd device index		*/
++	int		 dma1;		/**< 1st DMA index		*/
++	int		 dma2;		/**< 2nd DMA index		*/
++};
++
++/** \struct xf_adsp_tdm_renderer
++ *  \brief  TDM Renderer component structure
++ */
++struct xf_adsp_tdm_renderer {
++	struct xf_adsp_tdm_renderer_params   params; /**< parameter structure*/
++	struct xf_pool	  *buf_pool;  /**< buffer pool for data transfer  */
++	int	 handle_id;  /**< ID of registered handle	*/
++};
++
++/** \struct xf_adsp_tdm_capture_params
++ *  \brief  parameter structure for TDM Capture component
++ */
++struct xf_adsp_tdm_capture_params {
++	int	 ch_mode;	/**< channel mode		*/
++	int	 pcm_width;	/**< PCM width			*/
++	int	 frame_size;	/**< frame size			*/
++	int	 in_rate;	/**< input sampling rate	*/
++	int	 out_rate;	/**< output sampling rate	*/
++	int	 vol_rate;	/**< volume rate		*/
++	int	 dev1;		/**< 1st device index		*/
++	int	 dev2;		/**< 2nd device index		*/
++	int	 dma1;		/**< 1st DMA index		*/
++	int	 dma2;		/**< 2nd DMA index		*/
++};
++
++/** \struct xf_adsp_tdm_capture
++ *  \brief  TDM Capture component structure
++ */
++struct xf_adsp_tdm_capture {
++	struct xf_adsp_tdm_capture_params  params; /**< parameter structure*/
++	struct xf_pool	   *buf_pool;  /**< buffer pool for data transfer  */
++	int	 handle_id;  /**< ID of registered handle*/
++};
++
++/** \struct xf_handle
++ *  \brief Handle struct for each ADSP component
++ */
++struct xf_handle {
++	int	 comp_id;/**< ADSP component ID	  */
++	struct xf_callback_func  *cb;/**< callback functions	 */
++	void	*private_data;  /**< private data for callback functions*/
++};
++
++/** \struct xf_adsp_base
++ *  \brief Base component structure
++ */
++struct xf_adsp_base {
++	struct xf_adsp_base_cmd  cmd; /**< proxy commands	 */
++	void	*client; /**< client data which registered to proxy  */
++	struct xf_pool	 *aux_pool;  /**< auxiliary buffer pool data	 */
++	struct xf_handle *handle[MAX_HANDLE];	/**< handler data   */
++	struct task_struct *rsp_thread;/**< thread for response message*/
++	wait_queue_head_t base_wait;	 /**< ADSP base's waiting queue	 */
++	struct xf_message base_msg;   /**< ADSP base's response message   */
++	int base_flag;  /**< flag to control its waiting queue  */
++	int err_flag;  /**< flag to indicate a error from plugins */
++	int wait_flag;  /**< flag to control the polling waiting*/
++	spinlock_t lock; /**< spinlock data */
++};
++
++struct xf_pool *xf_adsp_allocate_mem_pool(int pool_size, int buf_length);
++int xf_adsp_free_mem_pool(struct xf_pool *pool);
++char *xf_adsp_get_data_from_pool(struct xf_pool *pool, int index);
++
++int xf_adsp_empty_this_buffer(int handle_id, char *buffer, int length);
++int xf_adsp_fill_this_buffer(int handle_id, char *buffer, int length);
++
++int xf_adsp_route(int src_handle_id, int dst_handle_id
++		 , int buf_cnt, int buf_size);
++
++int xf_adsp_set_param(int handle_id, int index, int value);
++int xf_adsp_get_param(int handle_id, int index, int *value);
++
++int xf_adsp_renderer_create(struct xf_adsp_renderer **renderer,
++			    struct xf_callback_func *cb, void *private_data);
++int xf_adsp_renderer_destroy(struct xf_adsp_renderer *renderer);
++int xf_adsp_renderer_set_params(struct xf_adsp_renderer *renderer);
++int xf_adsp_renderer_get_params(struct xf_adsp_renderer *renderer);
++
++int xf_adsp_capture_create(struct xf_adsp_capture **capture,
++			   struct xf_callback_func *cb, void *private_data);
++int xf_adsp_capture_destroy(struct xf_adsp_capture *capture);
++int xf_adsp_capture_set_params(struct xf_adsp_capture *capture);
++int xf_adsp_capture_get_params(struct xf_adsp_capture *capture);
++
++int xf_adsp_equalizer_create(struct xf_adsp_equalizer **equalizer,
++			     struct xf_callback_func *cb, void *private_data);
++int xf_adsp_equalizer_destroy(struct xf_adsp_equalizer *equalizer);
++int xf_adsp_equalizer_set_params(struct xf_adsp_equalizer *equalizer);
++int xf_adsp_equalizer_get_params(struct xf_adsp_equalizer *equalizer);
++
++int xf_adsp_tdm_renderer_create(struct xf_adsp_tdm_renderer **tdm_renderer,
++				struct xf_callback_func *cb,
++				void *private_data);
++int xf_adsp_tdm_renderer_destroy(struct xf_adsp_tdm_renderer *tdm_renderer);
++int xf_adsp_tdm_renderer_set_params(struct xf_adsp_tdm_renderer *tdm_renderer);
++int xf_adsp_tdm_renderer_get_params(struct xf_adsp_tdm_renderer *tdm_renderer);
++
++int xf_adsp_tdm_capture_create(struct xf_adsp_tdm_capture **tdm_capture,
++			       struct xf_callback_func *cb,
++			       void *private_data);
++int xf_adsp_tdm_capture_destroy(struct xf_adsp_tdm_capture *tdm_capture);
++int xf_adsp_tdm_capture_set_params(struct xf_adsp_tdm_capture *tdm_capture);
++int xf_adsp_tdm_capture_get_params(struct xf_adsp_tdm_capture *tdm_capture);
++
++#endif
+diff --git a/sound/soc/adsp/xf-adsp-config.h b/sound/soc/adsp/xf-adsp-config.h
+new file mode 100644
+index 0000000..818a46a
+--- /dev/null
++++ b/sound/soc/adsp/xf-adsp-config.h
+@@ -0,0 +1,604 @@
++/** ****************************************************************************
++ *\file		xf-adsp-config.h
++ *\brief	Header file for ADSP configuration
++ *\addtogroup	ADSP Driver
++ *******************************************************************************
++ *\date		Oct. 21, 2017
++ *\author	Renesas Electronics Corporation
++ *******************************************************************************
++ *\par		Copyright
++ *
++ * Copyright(c) 2016 Renesas Electoronics Corporation
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a copy
++ * of this software and associated documentation files (the "Software"), to deal
++ * in the Software without restriction, including without limitation the rights
++ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
++ * copies of the Software, and to permit persons to whom the Software is
++ * furnished to do so, subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be included in
++ * all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
++ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
++ * THE SOFTWARE.
++ ******************************************************************************/
++
++#ifndef __XF_ADSP_CONFIG_H
++#define __XF_ADSP_CONFIG_H
++
++/* Equalizer definition */
++#define XA_REL_EQZ_FILTER_NUM		(9) /**< number of filter */
++#define XA_REL_EQZ_GRAPHIC_BAND_NUM	(5) /**< number of graphic band */
++
++struct xf_buffer {
++	void			*address;
++	union {						/* PRQA S 750 3 */
++		struct xf_buffer *next;
++		struct xf_pool   *pool;
++	} link;
++};
++
++struct xf_pool {
++	/* length of individual buffer in a pool */
++	u32			length;
++
++	/* number of buffer in a pool */
++	u32			number;
++
++	/* pointer to pool memory */
++	void			*p;
++
++	/* pointer to first free buffer in a pool */
++	struct xf_buffer	*free;
++
++	/* individual buffer */
++	struct xf_buffer	buffer[0];		/* PRQA S 1037 */
++};
++
++struct xf_message {
++	/* pointer to the next item in the list */
++	struct xf_message	*next;
++
++	/* shmem session_id */
++	u32			id;
++
++	/* operation code */
++	u32			opcode;
++
++	/* length of attached message buffer */
++	u32			length;
++
++	/* message buffer */
++	void			*buffer;
++};
++
++/*******************************************************************************
++ * XF_GET_PARAM message
++ ******************************************************************************/
++
++/* ...message body (command/response) */
++union xf_get_param_msg {			/* PRQA S 750 18 */
++	/* ...command structure */
++	struct {
++		/* ...array of parameters requested */
++		u32		id[0];	/* PRQA S 1037 */
++
++	}   __attribute__((__packed__)) c;
++
++	/* ...response structure */
++	struct {
++		/* ...array of parameters values */
++		u32		value[0];/* PRQA S 1037 */
++
++	}   __attribute__((__packed__)) r;
++
++};
++
++/* ...length of the XF_GET_PARAM command/response */
++/* PRQA S 3453 2 */
++#define XF_GET_PARAM_CMD_LEN(params)	(sizeof(u32) * (params))
++#define XF_GET_PARAM_RSP_LEN(params)	(sizeof(u32) * (params))
++
++/*******************************************************************************
++ * XF_SET_PARAM message
++ ******************************************************************************/
++
++/* ...component initialization parameter */
++struct xf_set_param_item {
++	/* ...index of parameter passed to SET_CONFIG_PARAM call */
++	u32				 id;
++
++	/* ...value of parameter */
++	u32				 value;
++
++}   __attribute__ ((__packed__));
++
++/* ...message body (no response message? - tbd) */
++struct xf_set_param_msg {
++	/* ...command message */
++	struct xf_set_param_item	 item[0];	/* PRQA S 1037 */
++
++}   __attribute__ ((__packed__));
++
++/* ...length of the command message */
++/* PRQA S 3453 */
++#define XF_SET_PARAM_CMD_LEN(params) \
++	(sizeof(struct xf_set_param_item) * (params))
++
++/*******************************************************************************
++ * XF_ROUTE definition
++ ******************************************************************************/
++
++/* ...port routing command */
++struct xf_route_port_msg {
++	/* ...source port specification */
++	u32				 src;
++
++	/* ...destination port specification */
++	u32				 dst;
++
++	/* ...number of buffers to allocate */
++	u32				 alloc_number;
++
++	/* ...length of buffer to allocate */
++	u32				 alloc_size;
++
++	/* ...alignment restriction for a buffer */
++	u32				 alloc_align;
++
++}	__attribute__((__packed__));
++
++/*******************************************************************************
++ * XF_UNROUTE definition
++ ******************************************************************************/
++
++/* ...port unrouting command */
++struct xf_unroute_port_msg {
++	/* ...source port specification */
++	u32				 src;
++
++	/* ...destination port specification */
++	u32				 dst;
++
++}	__attribute__((__packed__));
++
++/* ...Capture states  */
++enum xa_capture_state {
++	XA_CAP_STATE_RUN	= 0,
++	XA_CAP_STATE_IDLE	= 1,
++	XA_CAP_STATE_PAUSE	= 2
++};
++
++/* ...Renderer states  */
++enum xa_renderer_state {
++	XA_RDR_STATE_RUN	= 0,
++	XA_RDR_STATE_IDLE	= 1,
++	XA_RDR_STATE_PAUSE	= 2
++};
++
++/*******************************************************************************
++ * Message routing composition - move somewhere else - tbd
++ ******************************************************************************/
++
++/* ...adjust IPC client of message going from user-space */
++#define XF_MSG_AP_FROM_USER(id, client) \
++	(((id) & ~(0xF << 2)) | ((client) << 2))
++
++/* ...wipe out IPC client from message going to user-space */
++#define XF_MSG_AP_TO_USER(id)		   \
++	((id) & ~(0xF << 18))
++
++/* ...port specification (12 bits) */
++#define __XF_PORT_SPEC(core, id, port)  ((core) | ((id) << 2) | ((port) << 8))
++#define __XF_PORT_SPEC2(id, port)	((id) | ((port) << 8))
++#define XF_PORT_CORE(spec)		((spec) & 0x3)
++#define XF_PORT_CLIENT(spec)		(((spec) >> 2) & 0x3F)
++#define XF_PORT_ID(spec)		(((spec) >> 8) & 0xF)
++
++/* ...message id contains source and destination ports specification */
++#define __XF_MSG_ID(src, dst)	(((src) & 0xFFFF) | (((dst) & 0xFFFF) << 16))
++#define XF_MSG_SRC(id)			(((id) >> 0) & 0xFFFF)
++#define XF_MSG_SRC_CORE(id)		(((id) >> 0) & 0x3)
++#define XF_MSG_SRC_CLIENT(id)		(((id) >> 2) & 0x3F)
++#define XF_MSG_SRC_PORT(id)		(((id) >> 8) & 0xF)
++#define XF_MSG_SRC_PROXY(id)		(((id) >> 15) & 0x1)
++#define XF_MSG_DST(id)			(((id) >> 16) & 0xFFFF)
++#define XF_MSG_DST_CORE(id)		(((id) >> 16) & 0x3)
++#define XF_MSG_DST_CLIENT(id)		(((id) >> 18) & 0x3F)
++#define XF_MSG_DST_PORT(id)		(((id) >> 24) & 0xF)
++#define XF_MSG_DST_PROXY(id)		(((id) >> 31) & 0x1)
++
++/* ...special treatment of AP-proxy destination field */
++#define XF_AP_IPC_CLIENT(id)		(((id) >> 18) & 0xF)
++#define XF_AP_CLIENT(id)		(((id) >> 22) & 0x1FF)
++#define __XF_AP_PROXY(core)		((core) | 0x8000)
++#define __XF_DSP_PROXY(core)		((core) | 0x8000)
++#define __XF_AP_CLIENT(core, client)	((core) | ((client) << 6) | 0x8000)
++
++/*******************************************************************************
++ * Opcode composition
++ ******************************************************************************/
++
++/* ...opcode composition with command/response data tags */
++#define __XF_OPCODE(c, r, op)	(((c) << 31) | ((r) << 30) | ((op) & 0x3F))
++
++/* ...accessors */
++#define XF_OPCODE_CDATA(opcode)		((opcode) & (1 << 31))
++#define XF_OPCODE_RDATA(opcode)		((opcode) & (1 << 30))
++#define XF_OPCODE_TYPE(opcode)		((opcode) & (0x3F))
++
++/*******************************************************************************
++ * Opcode types
++ ******************************************************************************/
++
++/* ...unregister client */
++#define XF_UNREGISTER			__XF_OPCODE(0, 0, 0)
++
++/* ...register client at proxy */
++#define XF_REGISTER			__XF_OPCODE(1, 0, 1)
++
++/* ...port routing command */
++#define XF_ROUTE			__XF_OPCODE(1, 0, 2)
++
++/* ...port unrouting command */
++#define XF_UNROUTE			__XF_OPCODE(1, 0, 3)
++
++/* ...shared buffer allocation */
++#define XF_ALLOC			__XF_OPCODE(0, 0, 4)
++
++/* ...shared buffer freeing */
++#define XF_FREE				__XF_OPCODE(0, 0, 5)
++
++/* ...set component parameters */
++#define XF_SET_PARAM			__XF_OPCODE(1, 0, 6)
++
++/* ...get component parameters */
++#define XF_GET_PARAM			__XF_OPCODE(1, 1, 7)
++
++/* ...input buffer reception */
++#define XF_EMPTY_THIS_BUFFER		__XF_OPCODE(1, 0, 8)
++
++/* ...output buffer reception */
++#define XF_FILL_THIS_BUFFER		__XF_OPCODE(0, 1, 9)
++
++/* ...flush specific port */
++#define XF_FLUSH			__XF_OPCODE(0, 0, 10)
++
++/* ...start component operation */
++#define XF_START			__XF_OPCODE(0, 0, 11)
++
++/* ...stop component operation */
++#define XF_STOP				__XF_OPCODE(0, 0, 12)
++
++/* ...pause component operation */
++#define XF_PAUSE			__XF_OPCODE(0, 0, 13)
++
++/* ...resume component operation */
++#define XF_RESUME			__XF_OPCODE(0, 0, 14)
++
++/* ...total amount of supported decoder commands */
++#define __XF_OP_NUM			(15)
++
++/*************************************************
++ * Renderer - specific configuration parameters
++ * **********************************************/
++
++enum xa_config_param_renderer {
++	XA_RDR_CONFIG_PARAM_STATE		= 0,
++	XA_RDR_CONFIG_PARAM_PCM_WIDTH		= 1,
++	XA_RDR_CONFIG_PARAM_CHANNELS		= 2,
++	XA_RDR_CONFIG_PARAM_SAMPLE_RATE		= 3,
++	XA_RDR_CONFIG_PARAM_FRAME_SIZE		= 4,
++	XA_RDR_CONFIG_PARAM_OUTPUT1		= 5,
++	XA_RDR_CONFIG_PARAM_DMACHANNEL1		= 6,
++	XA_RDR_CONFIG_PARAM_OUTPUT2		= 7,
++	XA_RDR_CONFIG_PARAM_DMACHANNEL2		= 8,
++	XA_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE	= 9,
++	XA_RDR_CONFIG_PARAM_VOLUME_RATE		= 10,
++	XA_RDR_CONFIG_PARAM_OUT_CHANNELS	= 11,
++	XA_RDR_CONFIG_PARAM_MIX_CONTROL		= 12,
++	XA_RDR_CONFIG_PARAM_NUM			= 13
++};
++
++/*************************************************
++ * Capture - specific configuration parameters
++ * **********************************************/
++
++enum xa_config_param_capture {
++	XA_CAP_CONFIG_PARAM_CB			= 0,
++	XA_CAP_CONFIG_PARAM_STATE		= 1,
++	XA_CAP_CONFIG_PARAM_PCM_WIDTH		= 2,
++	XA_CAP_CONFIG_PARAM_CHANNELS		= 3,
++	XA_CAP_CONFIG_PARAM_SAMPLE_RATE		= 4,
++	XA_CAP_CONFIG_PARAM_FRAME_SIZE		= 5,
++	XA_CAP_CONFIG_PARAM_INPUT1		= 6,
++	XA_CAP_CONFIG_PARAM_DMACHANNEL1		= 7,
++	XA_CAP_CONFIG_PARAM_INPUT2		= 8,
++	XA_CAP_CONFIG_PARAM_DMACHANNEL2		= 9,
++	XA_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE	= 10,
++	XA_CAP_CONFIG_PARAM_VOLUME_RATE		= 11,
++	XA_CAP_CONFIG_PARAM_NUM			= 12
++};
++
++/*************************************************
++ * Equalizer - specific configuration parameters
++ * **********************************************/
++
++enum xa_rel_eqz_filter_type {
++	XA_REL_EQZ_TYPE_THROUGH = 0,
++	XA_REL_EQZ_TYPE_PEAK	= 1,
++	XA_REL_EQZ_TYPE_BASS	= 2,
++	XA_REL_EQZ_TYPE_TREBLE	= 3
++};
++
++enum xa_rel_eqz_type {
++	XA_REL_EQZ_TYPE_PARAMETRIC	= 0,
++	XA_REL_EQZ_TYPE_GRAPHIC		= 1
++};
++
++/*****************************************************************************/
++/* Additional subcommand indices */
++/*****************************************************************************/
++
++enum xa_add_cmd_type_generic {
++	/* XA_API_CMD_SET_CONFIG_PARAM indices */
++	XA_EQZ_CONFIG_PARAM_COEF_FS			= 0x0000,
++	XA_EQZ_CONFIG_PARAM_PCM_WIDTH			= 0x0001,
++	XA_EQZ_CONFIG_PARAM_CH				= 0x0002,
++	XA_EQZ_CONFIG_PARAM_EQZ_TYPE			= 0x0003,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_FC	= 0x0010,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_FC	= 0x0011,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_FC	= 0x0012,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_FC	= 0x0013,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_FC	= 0x0014,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_FC	= 0x0015,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_FC	= 0x0016,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_FC	= 0x0017,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_FC	= 0x0018,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_TYPE	= 0x0020,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_TYPE	= 0x0021,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_TYPE	= 0x0022,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_TYPE	= 0x0023,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_TYPE	= 0x0024,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_TYPE	= 0x0025,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_TYPE	= 0x0026,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_TYPE	= 0x0027,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_TYPE	= 0x0028,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BW	= 0x0030,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_BW	= 0x0031,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_BW	= 0x0032,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_BW	= 0x0033,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_BW	= 0x0034,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_BW	= 0x0035,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_BW	= 0x0036,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_BW	= 0x0037,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_BW	= 0x0038,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_GA	= 0x0040,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_GA	= 0x0041,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_GA	= 0x0042,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_GA	= 0x0043,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_GA	= 0x0044,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_GA	= 0x0045,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_GA	= 0x0046,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_GA	= 0x0047,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_GA	= 0x0048,
++
++	XA_EQZ_CONFIG_PARAM_FILTER_0_COEF_BA	= 0x0050,
++	XA_EQZ_CONFIG_PARAM_FILTER_1_COEF_BA	= 0x0051,
++	XA_EQZ_CONFIG_PARAM_FILTER_2_COEF_BA	= 0x0052,
++	XA_EQZ_CONFIG_PARAM_FILTER_3_COEF_BA	= 0x0053,
++	XA_EQZ_CONFIG_PARAM_FILTER_4_COEF_BA	= 0x0054,
++	XA_EQZ_CONFIG_PARAM_FILTER_5_COEF_BA	= 0x0055,
++	XA_EQZ_CONFIG_PARAM_FILTER_6_COEF_BA	= 0x0056,
++	XA_EQZ_CONFIG_PARAM_FILTER_7_COEF_BA	= 0x0057,
++	XA_EQZ_CONFIG_PARAM_FILTER_8_COEF_BA	= 0x0058,
++
++	XA_EQZ_CONFIG_PARAM_BAND_0_GCOEF_GA	= 0x0060,
++	XA_EQZ_CONFIG_PARAM_BAND_1_GCOEF_GA	= 0x0061,
++	XA_EQZ_CONFIG_PARAM_BAND_2_GCOEF_GA	= 0x0062,
++	XA_EQZ_CONFIG_PARAM_BAND_3_GCOEF_GA	= 0x0063,
++	XA_EQZ_CONFIG_PARAM_BAND_4_GCOEF_GA	= 0x0064
++};
++
++/* ...tdm-renderer-specific configuration parameters */
++enum xa_config_param_tdm_renderer {
++	XA_TDM_RDR_CONFIG_PARAM_PCM_WIDTH	= 0,
++	XA_TDM_RDR_CONFIG_PARAM_CHANNEL_MODE	= 1,
++	XA_TDM_RDR_CONFIG_PARAM_IN_SAMPLE_RATE  = 2,
++	XA_TDM_RDR_CONFIG_PARAM_FRAME_SIZE	= 3,
++	XA_TDM_RDR_CONFIG_PARAM_OUTPUT1		= 4,
++	XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL1	= 5,
++	XA_TDM_RDR_CONFIG_PARAM_OUTPUT2		= 6,
++	XA_TDM_RDR_CONFIG_PARAM_DMACHANNEL2	= 7,
++	XA_TDM_RDR_CONFIG_PARAM_OUT_SAMPLE_RATE = 8,
++	XA_TDM_RDR_CONFIG_PARAM_VOLUME_RATE	= 9
++};
++
++enum xa_rel_tdm_renderer_channel_mode {
++	XA_TDM_RDR_CHANNEL_MODE_2X4 = 0, /**< 4 stereo TDM data	   */
++	XA_TDM_RDR_CHANNEL_MODE_1X8 = 1, /**< 1 eight-channel TDM data*/
++	/**< 1 six-channels plus 1 two-channels TDM data */
++	XA_TDM_RDR_CHANNEL_MODE_6_2 = 2,
++	XA_TDM_RDR_CHANNEL_MODE_2X3 = 3, /**< 3 stereo TDM data	   */
++	XA_TDM_RDR_CHANNEL_MODE_1X6 = 4	 /**< 1 six-channel TDM data  */
++};
++
++/* ...TDM Capture-specific configuration parameters */
++enum xa_config_param_tdm_capture {
++	XA_TDM_CAP_CONFIG_PARAM_PCM_WIDTH	= 0,
++	XA_TDM_CAP_CONFIG_PARAM_CHANNEL_MODE	= 1,
++	XA_TDM_CAP_CONFIG_PARAM_IN_SAMPLE_RATE  = 2,
++	XA_TDM_CAP_CONFIG_PARAM_FRAME_SIZE	= 3,
++	XA_TDM_CAP_CONFIG_PARAM_INPUT1		= 4,
++	XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL1	= 5,
++	XA_TDM_CAP_CONFIG_PARAM_INPUT2		= 6,
++	XA_TDM_CAP_CONFIG_PARAM_DMACHANNEL2	= 7,
++	XA_TDM_CAP_CONFIG_PARAM_OUT_SAMPLE_RATE = 8,
++	XA_TDM_CAP_CONFIG_PARAM_VOLUME_RATE	= 9
++};
++
++enum xa_rel_tdm_capture_channel_mode {
++	XA_TDM_CAP_CHANNEL_MODE_2X4 = 0, /**< 4 stereo TDM data  */
++	XA_TDM_CAP_CHANNEL_MODE_1X8 = 1, /**< 1 eight-channel TDM data*/
++	/**< 1 six-channels plus 1 two-channels TDM data */
++	XA_TDM_CAP_CHANNEL_MODE_6_2 = 2,
++	XA_TDM_CAP_CHANNEL_MODE_2X3 = 3, /**< 3 stereo TDM data	   */
++	XA_TDM_CAP_CHANNEL_MODE_1X6 = 4	 /**< 1 six-channel TDM data  */
++};
++
++/*****************************************************************************/
++/* HW supported	 */
++/*****************************************************************************/
++/* ...SSI modules supported by HW */
++enum ssi_module {
++	SSI00		= 0,
++	SSI01		= 1,
++	SSI02		= 2,
++	SSI03		= 3,
++	SSI04		= 4,
++	SSI05		= 5,
++	SSI06		= 6,
++	SSI07		= 7,
++	SSI10		= 10,
++	SSI11		= 11,
++	SSI12		= 12,
++	SSI13		= 13,
++	SSI14		= 14,
++	SSI15		= 15,
++	SSI16		= 16,
++	SSI17		= 17,
++	SSI20		= 20,
++	SSI21		= 21,
++	SSI22		= 22,
++	SSI23		= 23,
++	SSI24		= 24,
++	SSI25		= 25,
++	SSI26		= 26,
++	SSI27		= 27,
++	SSI30		= 30,
++	SSI31		= 31,
++	SSI32		= 32,
++	SSI33		= 33,
++	SSI34		= 34,
++	SSI35		= 35,
++	SSI36		= 36,
++	SSI37		= 37,
++	SSI40		= 40,
++	SSI41		= 41,
++	SSI42		= 42,
++	SSI43		= 43,
++	SSI44		= 44,
++	SSI45		= 45,
++	SSI46		= 46,
++	SSI47		= 47,
++	SSI5		= 50,
++	SSI6		= 60,
++	SSI7		= 70,
++	SSI8		= 80,
++	SSI90		= 90,
++	SSI91		= 91,
++	SSI92		= 92,
++	SSI93		= 93,
++	SSI94		= 94,
++	SSI95		= 95,
++	SSI96		= 96,
++	SSI97		= 97
++};
++
++/* ...SRC modules supported by HW */
++enum src_module {
++	SRC0	= 110,			  /* SRC0 */
++	SRC1	= 111,			  /* SRC1 */
++	SRC2	= 112,			  /* SRC2 */
++	SRC3	= 113,			  /* SRC3 */
++	SRC4	= 114,			  /* SRC4 */
++	SRC5	= 115,			  /* SRC5 */
++	SRC6	= 116,			  /* SRC6 */
++	SRC7	= 117,			  /* SRC7 */
++	SRC8	= 118,			  /* SRC8 */
++	SRC9	= 119,			  /* SRC9 */
++	SRCMAX  = 120			   /* Maximum number of SRC modules */
++};
++
++/* ...PDMA supported by HW */
++enum {
++	PDMA_CH00 = 0,
++	PDMA_CH01 = 1,
++	PDMA_CH02 = 2,
++	PDMA_CH03 = 3,
++	PDMA_CH04 = 4,
++	PDMA_CH05 = 5,
++	PDMA_CH06 = 6,
++	PDMA_CH07 = 7,
++	PDMA_CH08 = 8,
++	PDMA_CH09 = 9,
++	PDMA_CH10 = 10,
++	PDMA_CH11 = 11,
++	PDMA_CH12 = 12,
++	PDMA_CH13 = 13,
++	PDMA_CH14 = 14,
++	PDMA_CH15 = 15,
++	PDMA_CH16 = 16,
++	PDMA_CH17 = 17,
++	PDMA_CH18 = 18,
++	PDMA_CH19 = 19,
++	PDMA_CH20 = 20,
++	PDMA_CH21 = 21,
++	PDMA_CH22 = 22,
++	PDMA_CH23 = 23,
++	PDMA_CH24 = 24,
++	PDMA_CH25 = 25,
++	PDMA_CH26 = 26,
++	PDMA_CH27 = 27,
++	PDMA_CH28 = 28,
++	PDMA_CHMAX = 29
++};
++
++/* ...DMAC supported by HW */
++enum {
++	ADMAC_CH00 = PDMA_CHMAX + 0,
++	ADMAC_CH01 = PDMA_CHMAX + 1,
++	ADMAC_CH02 = PDMA_CHMAX + 2,
++	ADMAC_CH03 = PDMA_CHMAX + 3,
++	ADMAC_CH04 = PDMA_CHMAX + 4,
++	ADMAC_CH05 = PDMA_CHMAX + 5,
++	ADMAC_CH06 = PDMA_CHMAX + 6,
++	ADMAC_CH07 = PDMA_CHMAX + 7,
++	ADMAC_CH08 = PDMA_CHMAX + 8,
++	ADMAC_CH09 = PDMA_CHMAX + 9,
++	ADMAC_CH10 = PDMA_CHMAX + 10,
++	ADMAC_CH11 = PDMA_CHMAX + 11,
++	ADMAC_CH12 = PDMA_CHMAX + 12,
++	ADMAC_CH13 = PDMA_CHMAX + 13,
++	ADMAC_CH14 = PDMA_CHMAX + 14,
++	ADMAC_CH15 = PDMA_CHMAX + 15,
++	ADMAC_CH16 = PDMA_CHMAX + 16,
++	ADMAC_CH17 = PDMA_CHMAX + 17,
++	ADMAC_CH18 = PDMA_CHMAX + 18,
++	ADMAC_CH19 = PDMA_CHMAX + 19,
++	ADMAC_CH20 = PDMA_CHMAX + 20,
++	ADMAC_CH21 = PDMA_CHMAX + 21,
++	ADMAC_CH22 = PDMA_CHMAX + 22,
++	ADMAC_CH23 = PDMA_CHMAX + 23,
++	ADMAC_CH24 = PDMA_CHMAX + 24,
++	ADMAC_CH25 = PDMA_CHMAX + 25,
++	ADMAC_CH26 = PDMA_CHMAX + 26,
++	ADMAC_CH27 = PDMA_CHMAX + 27,
++	ADMAC_CH28 = PDMA_CHMAX + 28,
++	ADMAC_CH29 = PDMA_CHMAX + 29,
++	ADMAC_CH30 = PDMA_CHMAX + 30,
++	ADMAC_CH31 = PDMA_CHMAX + 31,
++	ADMAC_CHMAX = PDMA_CHMAX + 32
++};
++
++#endif
+-- 
+2.7.4
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ADSP-add-build-for-ADSP-sound-driver.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ADSP-add-build-for-ADSP-sound-driver.patch
new file mode 100644
index 00000000..ecab4120
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ADSP-add-build-for-ADSP-sound-driver.patch
@@ -0,0 +1,35 @@
+From 3ae5cb9feda031f660becc94f5496d5ee9b90e22 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Mon, 15 Oct 2018 17:57:56 +0700
+Subject: [PATCH 3/6] ADSP: add build for ADSP sound driver
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+---
+ sound/soc/Kconfig  | 1 +
+ sound/soc/Makefile | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
+index c0abad2067e1..f5f6abbd6e14 100644
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -71,6 +71,7 @@ source "sound/soc/txx9/Kconfig"
+ source "sound/soc/ux500/Kconfig"
+ source "sound/soc/xtensa/Kconfig"
+ source "sound/soc/zte/Kconfig"
++source "sound/soc/adsp/Kconfig"
+ 
+ # Supported codecs
+ source "sound/soc/codecs/Kconfig"
+diff --git a/sound/soc/Makefile b/sound/soc/Makefile
+index bf8c1e2ce0bf..6e77abba2b01 100644
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -52,3 +52,4 @@ obj-$(CONFIG_SND_SOC)	+= txx9/
+ obj-$(CONFIG_SND_SOC)	+= ux500/
+ obj-$(CONFIG_SND_SOC)	+= xtensa/
+ obj-$(CONFIG_SND_SOC)	+= zte/
++obj-$(CONFIG_SND_SOC)	+= adsp/
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch
new file mode 100644
index 00000000..6d95d65f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch
@@ -0,0 +1,185 @@
+From 825517f3f8ebe551d297db16e4582c0eae646f05 Mon Sep 17 00:00:00 2001
+From: tienphitran <tien.tran.uw@renesas.com>
+Date: Wed, 31 Oct 2018 16:12:36 +0700
+Subject: [PATCH 4/6] ADSP: integrate ADSP sound for H3, M3, M3N board
+
+Signed-off-by: tienphitran <tien.tran.uw@renesas.com>
+[takeshi.kihara.df: fix W=1 dtc warning]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ arch/arm64/boot/dts/renesas/r8a7795.dtsi      |  5 ++
+ arch/arm64/boot/dts/renesas/r8a7796.dtsi      |  5 ++
+ arch/arm64/boot/dts/renesas/r8a77965.dtsi     |  5 ++
+ .../boot/dts/renesas/salvator-common.dtsi     | 84 +++++++++++++++++--
+ 4 files changed, 94 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+index 1896e5250dff..8dfda0fda91c 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+@@ -793,6 +793,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+index c00d1da64198..726c0d07fe59 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+@@ -798,6 +798,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+index 454a67b132f4..799b005ade92 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+@@ -227,6 +227,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+index 922b9cc4797c..2c1d49c4bcaa 100644
+--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
++++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+@@ -153,11 +153,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture",
++				"ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -419,8 +435,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -731,6 +766,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -769,7 +843,7 @@
+ 		rsnd_port0: port@0 {
+ 			reg = <0>;
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch
new file mode 100644
index 00000000..34b32d8f
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0005-ADSP-integrate-ADSP-sound-for-E3-board.patch
@@ -0,0 +1,272 @@
+From 455f26d0de1cf6eaeb0aa5b58725e3e34d8d34bd Mon Sep 17 00:00:00 2001
+From: Nguyen Dang <nguyen.dang.wh@rvc.renesas.com>
+Date: Tue, 6 Nov 2018 11:36:15 +0700
+Subject: [PATCH 5/6] ADSP: integrate ADSP sound for E3 board
+
+Signed-off-by: Nguyen Dang <nguyen.dang.wh@renesas.com>
+[takeshi.kihara.df: fix W=1 dtc warning]
+[takeshi.kihara.df: support for dt file separation by E3 ES1.0 SoC]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 84 +++++++++++++++++--
+ .../boot/dts/renesas/r8a77990-es10-ebisu.dts  | 84 +++++++++++++++++--
+ arch/arm64/boot/dts/renesas/r8a77990.dtsi     |  5 ++
+ 3 files changed, 163 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+index 26081a6e1866..20fdb4085d87 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
++++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+@@ -221,11 +221,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture",   "ak4613 Capture",
++				"ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -501,8 +517,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -702,6 +737,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -737,7 +811,7 @@
+ 	ports {
+ 		rsnd_port0: port@0 {
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
+index 087d5533f3db..61e18309c4a4 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
++++ b/arch/arm64/boot/dts/renesas/r8a77990-es10-ebisu.dts
+@@ -221,11 +221,27 @@
+ 	};
+ 
+ 	sound_card: sound {
+-		compatible = "audio-graph-card";
++		compatible = "audio-graph-scu-card";
+ 
+ 		label = "rcar-sound";
+ 
+-		dais = <&rsnd_port0>;
++		prefix = "ak4613";
++		routing = "ak4613 Playback", "DAI0 Playback",
++				"DAI0 Capture",   "ak4613 Capture",
++				"ak4613 Playback", "Playback0",
++				"ak4613 Playback", "Playback1",
++				"ak4613 Playback", "Playback2",
++				"ak4613 Playback", "Playback3",
++				"Capture0", "ak4613 Capture",
++				"Capture1", "ak4613 Capture",
++				"Capture2", "ak4613 Capture",
++				"Capture3", "ak4613 Capture";
++
++		dais = <&adsp_port0
++			&adsp_port1
++			&adsp_port2
++			&adsp_port3
++			&rsnd_port0>;
+ 	};
+ 
+ 	vbus0_usb2: regulator-vbus0-usb2 {
+@@ -501,8 +517,27 @@
+ 		asahi-kasei,out5-single-end;
+ 		asahi-kasei,out6-single-end;
+ 
+-		port {
+-			ak4613_endpoint: endpoint {
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			ak4613_endpoint0: endpoint@0 {
++				reg = <0>;
++				remote-endpoint = <&adsp_endpoint0>;
++			};
++			ak4613_endpoint1: endpoint@1 {
++				reg = <1>;
++				remote-endpoint = <&adsp_endpoint1>;
++			};
++			ak4613_endpoint2: endpoint@2 {
++				reg = <2>;
++				remote-endpoint = <&adsp_endpoint2>;
++			};
++			ak4613_endpoint3: endpoint@3 {
++				reg = <3>;
++				remote-endpoint = <&adsp_endpoint3>;
++			};
++			ak4613_endpoint4: endpoint@4 {
++				reg = <4>;
+ 				remote-endpoint = <&rsnd_endpoint0>;
+ 			};
+ 		};
+@@ -702,6 +737,45 @@
+ 	status = "okay";
+ };
+ 
++&rcar_adsp_sound {
++	status = "okay";
++	/* Multiple DAI */
++	#sound-dai-cells = <1>;
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		adsp_port0: port@0 {
++			reg = <0>;
++			adsp_endpoint0: endpoint {
++				remote-endpoint = <&ak4613_endpoint0>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port1: port@1 {
++			reg = <1>;
++			adsp_endpoint1: endpoint {
++				remote-endpoint = <&ak4613_endpoint1>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port2: port@2 {
++			reg = <2>;
++			adsp_endpoint2: endpoint {
++				remote-endpoint = <&ak4613_endpoint2>;
++				dai-format = "left_j";
++			};
++		};
++		adsp_port3: port@3 {
++			reg = <3>;
++			adsp_endpoint3: endpoint {
++				remote-endpoint = <&ak4613_endpoint3>;
++				dai-format = "left_j";
++			};
++		};
++	};
++};
++
+ &rcar_sound {
+ 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ 	pinctrl-names = "default";
+@@ -737,7 +811,7 @@
+ 	ports {
+ 		rsnd_port0: port@0 {
+ 			rsnd_endpoint0: endpoint {
+-				remote-endpoint = <&ak4613_endpoint>;
++				remote-endpoint = <&ak4613_endpoint4>;
+ 
+ 				dai-format = "left_j";
+ 				bitclock-master = <&rsnd_endpoint0>;
+diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+index bd4d71e2b93e..845399adcbdb 100644
+--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
++++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+@@ -181,6 +181,11 @@
+ 		method = "smc";
+ 	};
+ 
++	rcar_adsp_sound: adsp_sound {
++		compatible =  "renesas,rcar_adsp_sound_gen3";
++		status = "disabled";
++	};
++
+ 	/* External SCIF clock - to be overridden by boards that provide it */
+ 	scif_clk: scif {
+ 		compatible = "fixed-clock";
+-- 
+2.19.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch
new file mode 100644
index 00000000..3f601b64
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0006-ADSP-remove-HDMI-support-from-rcar-sound.patch
@@ -0,0 +1,101 @@
+From acd7751ebcce90a442588f37fc6731990b5e09ea Mon Sep 17 00:00:00 2001
+From: Nguyen Dang <nguyen.dang.wh@renesas.com>
+Date: Tue, 6 Nov 2018 11:46:25 +0700
+Subject: [PATCH v2 6/6] ADSP: remove HDMI support from rcar-sound
+
+Signed-off-by: Nguyen Dang <nguyen.dang.wh@renesas.com>
+[takeshi.kihara.df: support for dt file separation by M3v3.0 SoC]
+Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
+---
+ arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts       | 6 ------
+ arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts      | 6 ------
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts       | 5 -----
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts | 5 -----
+ arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts      | 5 -----
+ 5 files changed, 27 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+index 6928afbd8e06..b268afd7df85 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+@@ -104,12 +104,6 @@
+ 	status = "okay";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1	/* HDMI0  */
+-		&rsnd_port2>;	/* HDMI1  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+index 498f78875dbd..b6ec3036e9fd 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+@@ -114,12 +114,6 @@
+ 	status = "okay";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1	/* HDMI0  */
+-		&rsnd_port2>;	/* HDMI1  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+index cf92aa3939e3..4faf935c4a32 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+@@ -88,11 +88,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
+index 664dc9250bbb..13960f69b2f7 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs-2x4g.dts
+@@ -96,11 +96,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+index 7d39dc96ac8a..1cd6f0463361 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+@@ -88,11 +88,6 @@
+ 		      "dclkin.0", "dclkin.1", "dclkin.2";
+ };
+ 
+-&sound_card {
+-	dais = <&rsnd_port0	/* ak4613 */
+-		&rsnd_port1>;	/* HDMI0  */
+-};
+-
+ &hdmi0 {
+ 	status = "okay";
+ 
+-- 
+2.21.0
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/adsp.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/adsp.cfg
new file mode 100644
index 00000000..f19e8d29
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/adsp.cfg
@@ -0,0 +1,3 @@
+CONFIG_SND_SOC_ADSP=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/capacity_aware_migration_strategy.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/capacity_aware_migration_strategy.cfg
new file mode 100644
index 00000000..e8b09aa7
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/capacity_aware_migration_strategy.cfg
@@ -0,0 +1 @@
+CONFIG_SCHED_DEBUG=y
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig
new file mode 100644
index 00000000..dd59bb89
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig
@@ -0,0 +1,6423 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm64 4.14.75 Kernel Configuration
+#
+CONFIG_ARM64=y
+CONFIG_64BIT=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_CONT_SHIFT=4
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_SMP=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_THREAD_INFO_IN_TASK=y
+
+#
+# General setup
+#
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+# CONFIG_USELIB is not set
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_GENERIC_IRQ_DEBUGFS is not set
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TASKS_RCU=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_CFS_BANDWIDTH is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_CGROUP_PIDS=y
+# CONFIG_CGROUP_RDMA is not set
+# CONFIG_CGROUP_FREEZER is not set
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_POSIX_TIMERS=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_NMI=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_FUTEX_PI=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_BPF_SYSCALL is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_MEMBARRIER=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+# CONFIG_PC104 is not set
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SLAB_MERGE_DEFAULT=y
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+# CONFIG_SLAB_FREELIST_HARDENED is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+CONFIG_PROFILING=y
+CONFIG_CRASH_CORE=y
+CONFIG_KEXEC_CORE=y
+# CONFIG_KPROBES is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_NMI=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_THIN_ARCHIVES=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
+# CONFIG_HAVE_ARCH_HASH is not set
+# CONFIG_ISA_BUS_API is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_VMAP_STACK=y
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_REFCOUNT_FULL is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_BLK_DEV_ZONED is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+# CONFIG_BLK_WBT is not set
+CONFIG_BLK_DEBUG_FS=y
+# CONFIG_BLK_SED_OPAL is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_MQ_IOSCHED_DEADLINE=y
+CONFIG_MQ_IOSCHED_KYBER=y
+# CONFIG_IOSCHED_BFQ is not set
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Platform selection
+#
+# CONFIG_ARCH_ACTIONS is not set
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+# CONFIG_ARCH_REALTEK is not set
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_R8A77965=y
+CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A77980=y
+CONFIG_ARCH_R8A77990=y
+CONFIG_ARCH_R8A77995=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+# CONFIG_ARCH_VULCAN is not set
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_ATS=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_IOV=y
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+CONFIG_PCI_LABEL=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# DesignWare PCI Core Support
+#
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+# CONFIG_PCIE_DW_PLAT is not set
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_KIRIN=y
+
+#
+# PCI host controller drivers
+#
+CONFIG_PCI_AARDVARK=y
+# CONFIG_PCIE_XILINX_NWL is not set
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_XGENE_MSI=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_PLATFORM=y
+CONFIG_PCIE_IPROC_MSI=y
+CONFIG_PCI_HOST_THUNDER_PEM=y
+CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCIE_ROCKCHIP=m
+# CONFIG_PCIE_MEDIATEK is not set
+
+#
+# PCI Endpoint
+#
+# CONFIG_PCI_ENDPOINT is not set
+
+#
+# PCI switch controller drivers
+#
+# CONFIG_PCI_SW_SWITCHTEC is not set
+
+#
+# Kernel Features
+#
+
+#
+# ARM errata workarounds via the alternatives framework
+#
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_ERRATUM_845719=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_1024718=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23144=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_CAVIUM_ERRATUM_30115=y
+CONFIG_QCOM_FALKOR_ERRATUM_1003=y
+CONFIG_QCOM_FALKOR_ERRATUM_1009=y
+CONFIG_QCOM_QDF2400_ERRATUM_0065=y
+CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_16K_PAGES is not set
+# CONFIG_ARM64_64K_PAGES is not set
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SCHED_MC=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_HOTPLUG_CPU=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=2
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_HOLES_IN_ZONE=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_MEMORY_FAILURE=y
+# CONFIG_HWPOISON_INJECT is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_AREAS=7
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FRAME_VECTOR=y
+# CONFIG_PERCPU_STATS is not set
+CONFIG_SECCOMP=y
+CONFIG_PARAVIRT=y
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ARM64_SSBD=y
+# CONFIG_ARMV8_DEPRECATED is not set
+# CONFIG_ARM64_SW_TTBR0_PAN is not set
+
+#
+# ARMv8.1 architectural features
+#
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_PAN=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_VHE=y
+
+#
+# ARMv8.2 architectural features
+#
+CONFIG_ARM64_UAO=y
+# CONFIG_ARM64_PMEM is not set
+CONFIG_ARM64_MODULE_CMODEL_LARGE=y
+# CONFIG_RANDOMIZE_BASE is not set
+
+#
+# Boot options
+#
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_EFI_STUB=y
+CONFIG_EFI=y
+CONFIG_DMI=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_OPP=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_CPU_PM=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_DT_IDLE_STATES=y
+
+#
+# ARM CPU Idle Drivers
+#
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+
+#
+# CPU frequency scaling drivers
+#
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=y
+# CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG is not set
+# CONFIG_ARM_DT_BL_CPUFREQ is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA20_CPUFREQ=y
+CONFIG_ARM_TEGRA124_CPUFREQ=y
+CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
+# CONFIG_QORIQ_CPUFREQ is not set
+CONFIG_NET=y
+CONFIG_NET_INGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+CONFIG_UNIX=y
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_TLS is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_NET_IP_TUNNEL=m
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_RAW_DIAG is not set
+# CONFIG_INET_DIAG_DESTROY is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_VTI is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_SEG6_LWTUNNEL is not set
+# CONFIG_IPV6_SEG6_HMAC is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NET_PTP_CLASSIFY=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_COMMON=m
+# CONFIG_NF_LOG_NETDEV is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_PROTO_DCCP=y
+CONFIG_NF_NAT_PROTO_UDPLITE=y
+CONFIG_NF_NAT_PROTO_SCTP=y
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_REDIRECT is not set
+# CONFIG_NF_TABLES is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_NAT=m
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_SOCKET_IPV4 is not set
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_LOG_ARP is not set
+CONFIG_NF_LOG_IPV4=m
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NF_NAT_MASQUERADE_IPV4=m
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_NF_SOCKET_IPV6 is not set
+# CONFIG_NF_DUP_IPV6 is not set
+CONFIG_NF_REJECT_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NF_NAT_MASQUERADE_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+# CONFIG_IP6_NF_TARGET_NPT is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_MRP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_HAVE_NET_DSA=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_6LOWPAN is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_NET_NSH is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_QRTR is not set
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+# CONFIG_BT_RFCOMM is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_NOKIA is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_LL=y
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_INTEL is not set
+# CONFIG_BT_HCIUART_BCM is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+# CONFIG_CFG80211_WEXT is not set
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_GPIO is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+# CONFIG_NET_9P_XEN is not set
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_PSAMPLE is not set
+# CONFIG_NET_IFE is not set
+# CONFIG_LWTUNNEL is not set
+CONFIG_DST_CACHE=y
+CONFIG_GRO_CELLS=y
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+CONFIG_ARM_AMBA=y
+CONFIG_TEGRA_AHB=y
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
+CONFIG_SYS_HYPERVISOR=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_SOC_BUS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_SPMI=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_DMA_FENCE_TRACE is not set
+CONFIG_DMA_CMA=y
+
+#
+# Default contiguous memory area size:
+#
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+
+#
+# Bus devices
+#
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCN is not set
+CONFIG_BRCMSTB_GISB_ARB=y
+CONFIG_QCOM_EBI2=y
+# CONFIG_SIMPLE_PM_BUS is not set
+CONFIG_SUNXI_RSB=y
+# CONFIG_TEGRA_ACONNECT is not set
+# CONFIG_TEGRA_GMI is not set
+CONFIG_UNIPHIER_SYSTEM_BUS=y
+CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Partition parsers
+#
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MCHP23K256 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MTD_NAND_DENALI=y
+# CONFIG_MTD_NAND_DENALI_PCI is not set
+CONFIG_MTD_NAND_DENALI_DT=y
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+# CONFIG_MTD_NAND_RICOH is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_BRCMNAND is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_IFC is not set
+# CONFIG_MTD_NAND_SUNXI is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+# CONFIG_MTD_NAND_QCOM is not set
+# CONFIG_MTD_NAND_MTK is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+CONFIG_OF_NUMA=y
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_XEN_BLKDEV_BACKEND is not set
+CONFIG_VIRTIO_BLK=y
+# CONFIG_VIRTIO_BLK_SCSI is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+CONFIG_NVME_CORE=m
+CONFIG_BLK_DEV_NVME=m
+# CONFIG_NVME_FC is not set
+# CONFIG_NVME_TARGET is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_QCOM_COINCELL is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_SRAM=y
+CONFIG_VEXPRESS_SYSCFG=y
+# CONFIG_PCI_ENDPOINT_TEST is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_AT25=m
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_EEPROM_IDT_89HPESX is not set
+# CONFIG_CB710_CORE is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# SCIF Bus Driver
+#
+
+#
+# VOP Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_GENWQE is not set
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+# CONFIG_CXL_LIB is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_XEN_SCSI_FRONTEND is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+# CONFIG_SATA_ZPODD is not set
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+# CONFIG_AHCI_BRCM is not set
+CONFIG_AHCI_CEVA=y
+# CONFIG_AHCI_MTK is not set
+CONFIG_AHCI_MVEBU=y
+# CONFIG_AHCI_SUNXI is not set
+# CONFIG_AHCI_TEGRA is not set
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+# CONFIG_SATA_AHCI_SEATTLE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_RCAR=y
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_PATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+# CONFIG_VXLAN is not set
+# CONFIG_MACSEC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_TUN=y
+CONFIG_TAP=m
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+# CONFIG_NLMON is not set
+# CONFIG_ARCNET is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_VORTEX is not set
+# CONFIG_TYPHOON is not set
+CONFIG_NET_VENDOR_ADAPTEC=y
+# CONFIG_ADAPTEC_STARFIRE is not set
+CONFIG_NET_VENDOR_AGERE=y
+# CONFIG_ET131X is not set
+CONFIG_NET_VENDOR_ALACRITECH=y
+# CONFIG_SLICOSS is not set
+CONFIG_NET_VENDOR_ALLWINNER=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_NET_VENDOR_ALTEON=y
+# CONFIG_ACENIC is not set
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_PCNET32 is not set
+CONFIG_AMD_XGBE=y
+# CONFIG_AMD_XGBE_HAVE_ECC is not set
+CONFIG_NET_XGENE=y
+# CONFIG_NET_XGENE_V2 is not set
+CONFIG_NET_VENDOR_AQUANTIA=y
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_NET_VENDOR_ATHEROS=y
+# CONFIG_ATL2 is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ALX is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+CONFIG_MACB=y
+CONFIG_MACB_USE_HWSTAMP=y
+# CONFIG_MACB_PCI is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2X is not set
+CONFIG_BGMAC=y
+CONFIG_BGMAC_PLATFORM=y
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_BNXT is not set
+CONFIG_NET_VENDOR_BROCADE=y
+# CONFIG_BNA is not set
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_THUNDER_NIC_PF=y
+# CONFIG_THUNDER_NIC_VF is not set
+CONFIG_THUNDER_NIC_BGX=y
+CONFIG_THUNDER_NIC_RGX=y
+# CONFIG_LIQUIDIO is not set
+# CONFIG_LIQUIDIO_VF is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+CONFIG_NET_VENDOR_CISCO=y
+# CONFIG_ENIC is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_DEC=y
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_DLINK=y
+# CONFIG_DL2K is not set
+# CONFIG_SUNDANCE is not set
+CONFIG_NET_VENDOR_EMULEX=y
+# CONFIG_BE2NET is not set
+CONFIG_NET_VENDOR_EZCHIP=y
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+CONFIG_NET_VENDOR_EXAR=y
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+CONFIG_NET_VENDOR_FREESCALE=y
+# CONFIG_FSL_FMAN is not set
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+# CONFIG_GIANFAR is not set
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIP04_ETH is not set
+CONFIG_HNS_MDIO=y
+CONFIG_HNS=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+# CONFIG_HNS3 is not set
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_HUAWEI=y
+CONFIG_NET_VENDOR_INTEL=y
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGB_HWMON=y
+CONFIG_IGBVF=y
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_FM10K is not set
+CONFIG_NET_VENDOR_I825XX=y
+# CONFIG_JME is not set
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
+CONFIG_MVPP2=y
+# CONFIG_PXA168_ETH is not set
+# CONFIG_SKGE is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLXSW_CORE is not set
+# CONFIG_MLXFW is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+CONFIG_NET_VENDOR_MYRI=y
+# CONFIG_MYRI10GE is not set
+# CONFIG_FEALNX is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NS83820 is not set
+CONFIG_NET_VENDOR_NETRONOME=y
+# CONFIG_NFP is not set
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET_VENDOR_NVIDIA=y
+# CONFIG_FORCEDETH is not set
+CONFIG_NET_VENDOR_OKI=y
+# CONFIG_ETHOC is not set
+CONFIG_NET_PACKET_ENGINE=y
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_NET_VENDOR_QLOGIC=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_QED is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000_SPI is not set
+# CONFIG_QCA7000_UART is not set
+CONFIG_QCOM_EMAC=m
+# CONFIG_RMNET is not set
+CONFIG_NET_VENDOR_REALTEK=y
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_VENDOR_RENESAS=y
+# CONFIG_SH_ETH is not set
+CONFIG_RAVB=y
+CONFIG_NET_VENDOR_RDC=y
+# CONFIG_R6040 is not set
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+# CONFIG_SC92031 is not set
+CONFIG_NET_VENDOR_SIS=y
+# CONFIG_SIS900 is not set
+# CONFIG_SIS190 is not set
+CONFIG_NET_VENDOR_SOLARFLARE=y
+# CONFIG_SFC is not set
+# CONFIG_SFC_FALCON is not set
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_SMC91X=y
+# CONFIG_EPIC100 is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_SMSC9420 is not set
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+# CONFIG_DWMAC_DWC_QOS_ETH is not set
+CONFIG_DWMAC_GENERIC=y
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+# CONFIG_DWMAC_SOCFPGA is not set
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
+# CONFIG_STMMAC_PCI is not set
+CONFIG_NET_VENDOR_SUN=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NIU is not set
+CONFIG_NET_VENDOR_TEHUTI=y
+# CONFIG_TEHUTI is not set
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TLAN is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_NET_VENDOR_SYNOPSYS=y
+# CONFIG_DWC_XLGMAC is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_BUS=y
+# CONFIG_MDIO_BCM_IPROC is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_MDIO_CAVIUM=y
+# CONFIG_MDIO_GPIO is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_SUN4I is not set
+CONFIG_MDIO_THUNDER=y
+CONFIG_MDIO_XGENE=y
+CONFIG_PHYLIB=y
+CONFIG_SWPHY=y
+# CONFIG_LED_TRIGGER_PHY is not set
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+CONFIG_AT803X_PHY=m
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CORTINA_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_10G_PHY=m
+CONFIG_MESON_GXL_PHY=m
+CONFIG_MICREL_PHY=y
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_ROCKCHIP_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+# CONFIG_USB_LAN78XX is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=m
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SR9700 is not set
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_NET_CH9200 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+# CONFIG_ADM8211 is not set
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH5K_PCI is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_AR5523 is not set
+# CONFIG_WIL6210 is not set
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_WLAN_VENDOR_BROADCOM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_BRCMUTIL=m
+# CONFIG_BRCMSMAC is not set
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_PROTO_BCDC=y
+CONFIG_BRCMFMAC_SDIO=y
+# CONFIG_BRCMFMAC_USB is not set
+# CONFIG_BRCMFMAC_PCIE is not set
+# CONFIG_BRCM_TRACING is not set
+# CONFIG_BRCMDBG is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_WLAN_VENDOR_INTEL=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+CONFIG_WLAN_VENDOR_INTERSIL=y
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PRISM54 is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MWIFIEX is not set
+# CONFIG_MWL8K is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+# CONFIG_MT7601U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CE is not set
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8723BE is not set
+# CONFIG_RTL8188EE is not set
+# CONFIG_RTL8192EE is not set
+# CONFIG_RTL8821AE is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+CONFIG_WLAN_VENDOR_RSI=y
+# CONFIG_RSI_91X is not set
+CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_CW1200 is not set
+CONFIG_WLAN_VENDOR_TI=y
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+CONFIG_WL18XX=m
+CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
+CONFIG_WLCORE_SDIO=m
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_ZD1211RW is not set
+CONFIG_WLAN_VENDOR_QUANTENNA=y
+# CONFIG_QTNFMAC_PEARL_PCIE is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_XEN_NETDEV_BACKEND is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_ISDN is not set
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
+CONFIG_INPUT_MATRIXKMAP=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADC=m
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_DLINK_DIR685 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_TEGRA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+CONFIG_MOUSE_PS2_SMBUS=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+CONFIG_INPUT_PM8941_PWRKEY=y
+# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_AXP20X_PEK is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_PWM_VIBRA is not set
+# CONFIG_INPUT_RK805_PWRKEY is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_SERIO_GPIO_PS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_FINTEK is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_ASPEED_VUART is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=18
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_EARLYCON=y
+CONFIG_SERIAL_SH_SCI_DMA=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_SPRD is not set
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_HVC_DCC is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_BCM2835=m
+CONFIG_HW_RANDOM_IPROC_RNG200=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_HW_RANDOM_VIRTIO is not set
+CONFIG_HW_RANDOM_HISI=m
+CONFIG_HW_RANDOM_MSM=m
+CONFIG_HW_RANDOM_XGENE=m
+CONFIG_HW_RANDOM_MESON=m
+CONFIG_HW_RANDOM_CAVIUM=m
+CONFIG_HW_RANDOM_MTK=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_GPMUX is not set
+# CONFIG_I2C_MUX_LTC4306 is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+# CONFIG_I2C_MUX_MLXCPLD is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HIX5HD2 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_I2C_SCMI is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BCM2835=m
+CONFIG_I2C_BCM_IPROC=y
+CONFIG_I2C_BRCMSTB=y
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_I2C_DESIGNWARE_SLAVE is not set
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_EMEV2 is not set
+CONFIG_I2C_EXYNOS5=y
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
+# CONFIG_I2C_MT65XX is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_PXA_SLAVE is not set
+CONFIG_I2C_QUP=y
+# CONFIG_I2C_RIIC is not set
+CONFIG_I2C_RK3X=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SPRD is not set
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_TEGRA_BPMP=y
+# CONFIG_I2C_UNIPHIER is not set
+CONFIG_I2C_UNIPHIER_F=y
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_I2C_RCAR=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_CROS_EC_TUNNEL=y
+# CONFIG_I2C_XGENE_SLIMPRO is not set
+CONFIG_I2C_ZX2967=y
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_SLAVE=y
+# CONFIG_I2C_SLAVE_EEPROM is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_ARMADA_3700 is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_BCM_QSPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_FSL_DSPI is not set
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
+# CONFIG_SPI_MT65XX is not set
+# CONFIG_SPI_OC_TINY is not set
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+CONFIG_SPI_ROCKCHIP=y
+# CONFIG_SPI_RSPI is not set
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_SH_MSIOF is not set
+# CONFIG_SPI_SH_HSPI is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_TEGRA114 is not set
+# CONFIG_SPI_TEGRA20_SFLASH is not set
+# CONFIG_SPI_TEGRA20_SLINK is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XLP is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_SLAVE is not set
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_HSI is not set
+CONFIG_PPS=y
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_DTE=y
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_PINMUX=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+# CONFIG_PINCTRL_MCP23S08 is not set
+CONFIG_PINCTRL_MESON=y
+CONFIG_PINCTRL_ROCKCHIP=y
+CONFIG_PINCTRL_SINGLE=y
+# CONFIG_PINCTRL_SX150X is not set
+CONFIG_PINCTRL_MAX77620=y
+# CONFIG_PINCTRL_RK805 is not set
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PINCTRL_IPROC_GPIO=y
+CONFIG_PINCTRL_NS2_MUX=y
+# CONFIG_PINCTRL_BERLIN_BG2 is not set
+# CONFIG_PINCTRL_BERLIN_BG2CD is not set
+# CONFIG_PINCTRL_BERLIN_BG2Q is not set
+# CONFIG_PINCTRL_BERLIN_BG4CT is not set
+CONFIG_PINCTRL_MVEBU=y
+CONFIG_PINCTRL_ARMADA_AP806=y
+CONFIG_PINCTRL_ARMADA_CP110=y
+CONFIG_PINCTRL_ARMADA_37XX=y
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+CONFIG_PINCTRL_IPQ8074=y
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8994=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+CONFIG_PINCTRL_SAMSUNG=y
+CONFIG_PINCTRL_EXYNOS=y
+CONFIG_PINCTRL_EXYNOS_ARM64=y
+CONFIG_PINCTRL_SH_PFC=y
+CONFIG_PINCTRL_PFC_R8A7795=y
+CONFIG_PINCTRL_PFC_R8A7796=y
+CONFIG_PINCTRL_PFC_R8A77965=y
+CONFIG_PINCTRL_PFC_R8A77970=y
+CONFIG_PINCTRL_PFC_R8A77980=y
+CONFIG_PINCTRL_PFC_R8A77990=y
+CONFIG_PINCTRL_PFC_R8A77995=y
+# CONFIG_PINCTRL_SPRD is not set
+CONFIG_PINCTRL_SUNXI=y
+# CONFIG_PINCTRL_SUN4I_A10 is not set
+# CONFIG_PINCTRL_SUN5I is not set
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A83T_R is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+CONFIG_PINCTRL_SUN8I_H3_R=y
+# CONFIG_PINCTRL_SUN8I_V3S is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_SUN50I_A64_R=y
+CONFIG_PINCTRL_SUN50I_H5=y
+CONFIG_PINCTRL_TEGRA=y
+CONFIG_PINCTRL_TEGRA124=y
+CONFIG_PINCTRL_TEGRA210=y
+CONFIG_PINCTRL_TEGRA_XUSB=y
+CONFIG_PINCTRL_UNIPHIER=y
+# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
+# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
+# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
+# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
+# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
+CONFIG_PINCTRL_UNIPHIER_LD11=y
+CONFIG_PINCTRL_UNIPHIER_LD20=y
+CONFIG_PINCTRL_UNIPHIER_PXS3=y
+CONFIG_PINCTRL_MTK=y
+CONFIG_PINCTRL_MT8173=y
+# CONFIG_PINCTRL_ZX296718 is not set
+CONFIG_GPIOLIB=y
+CONFIG_OF_GPIO=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_GENERIC=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMDPT is not set
+# CONFIG_GPIO_AXP209 is not set
+CONFIG_GPIO_BRCMSTB=y
+CONFIG_GPIO_DWAPB=y
+# CONFIG_GPIO_EXAR is not set
+# CONFIG_GPIO_FTGPIO010 is not set
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_GPIO_SYSCON is not set
+CONFIG_GPIO_TEGRA=y
+# CONFIG_GPIO_THUNDERX is not set
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_XGENE_SB=y
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XLP is not set
+# CONFIG_GPIO_ZYNQ is not set
+# CONFIG_GPIO_ZX is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_TPIC2810 is not set
+
+#
+# MFD GPIO expanders
+#
+# CONFIG_GPIO_BD9571MWV is not set
+CONFIG_GPIO_MAX77620=y
+
+#
+# PCI GPIO expanders
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_PCI_IDIO_16 is not set
+# CONFIG_GPIO_RDC321X is not set
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_PISOSR is not set
+# CONFIG_GPIO_XRA1403 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_BRCMSTB=y
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_HISI is not set
+CONFIG_POWER_RESET_MSM=y
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_RESTART is not set
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_ZX is not set
+CONFIG_REBOOT_MODE=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_LEGO_EV3 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_CHARGER_SBS is not set
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_BATTERY_BQ27XXX_I2C=y
+# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
+# CONFIG_AXP20X_POWER is not set
+# CONFIG_AXP288_FUEL_GAUGE is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_LTC3651 is not set
+# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
+# CONFIG_CHARGER_QCOM_SMBB is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_CHARGER_RT9455 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_ARM_SCPI=y
+# CONFIG_SENSORS_ASPEED is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_TC654 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_STTS751 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+CONFIG_SENSORS_INA2XX=m
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP108 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_XGENE is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_SENSORS_ACPI_POWER is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_STEP_WISE is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+# CONFIG_CLOCK_THERMAL is not set
+# CONFIG_DEVFREQ_THERMAL is not set
+CONFIG_THERMAL_EMULATION=y
+CONFIG_HISI_THERMAL=y
+# CONFIG_MAX77620_THERMAL is not set
+# CONFIG_QORIQ_THERMAL is not set
+CONFIG_ROCKCHIP_THERMAL=m
+# CONFIG_RCAR_THERMAL is not set
+CONFIG_RCAR_GEN3_THERMAL=y
+# CONFIG_ARMADA_THERMAL is not set
+
+#
+# ACPI INT340X thermal drivers
+#
+CONFIG_MTK_THERMAL=y
+
+#
+# Samsung thermal drivers
+#
+CONFIG_EXYNOS_THERMAL=y
+
+#
+# NVIDIA Tegra thermal drivers
+#
+# CONFIG_TEGRA_SOCTHERM is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+
+#
+# Qualcomm thermal drivers
+#
+CONFIG_QCOM_TSENS=y
+# CONFIG_ZX2967_THERMAL is not set
+CONFIG_UNIPHIER_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_SUNXI_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX77620_WATCHDOG is not set
+# CONFIG_IMX2_WDT is not set
+# CONFIG_TEGRA_WATCHDOG is not set
+# CONFIG_QCOM_WDT is not set
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+# CONFIG_MEDIATEK_WATCHDOG is not set
+CONFIG_RENESAS_WDT=y
+# CONFIG_RENESAS_RZAWDT is not set
+# CONFIG_ZX2967_WATCHDOG is not set
+CONFIG_UNIPHIER_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+CONFIG_BCM2835_WDT=y
+# CONFIG_BCM7038_WDT is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_XEN_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_SUN4I_GPADC is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+CONFIG_MFD_BD9571MWV=y
+# CONFIG_MFD_AC100 is not set
+CONFIG_MFD_AXP20X=y
+# CONFIG_MFD_AXP20X_I2C is not set
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+CONFIG_MFD_EXYNOS_LPASS=m
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+CONFIG_MFD_HI6421_PMIC=y
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+CONFIG_MFD_MAX77620=y
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_CPCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_QCOM_RPM is not set
+CONFIG_MFD_SPMI_PMIC=y
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+CONFIG_MFD_RK808=y
+# CONFIG_MFD_RN5T618 is not set
+CONFIG_MFD_SEC_CORE=y
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_TI_LMU is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS68470 is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TI_LP87565 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_BD9571MWV=y
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_GPIO=y
+# CONFIG_REGULATOR_HI6421 is not set
+CONFIG_REGULATOR_HI6421V530=y
+CONFIG_REGULATOR_HI655X=y
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX77620=y
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
+# CONFIG_REGULATOR_S2MPA01 is not set
+CONFIG_REGULATOR_S2MPS11=y
+# CONFIG_REGULATOR_S5M8767 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS65132 is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_VCTRL is not set
+# CONFIG_REGULATOR_VEXPRESS is not set
+CONFIG_CEC_CORE=y
+CONFIG_RC_CORE=m
+CONFIG_RC_MAP=m
+CONFIG_RC_DECODERS=y
+# CONFIG_LIRC is not set
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_SHARP_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_XMP_DECODER=m
+CONFIG_RC_DEVICES=y
+# CONFIG_RC_ATI_REMOTE is not set
+# CONFIG_IR_ENE is not set
+# CONFIG_IR_HIX5HD2 is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_ITE_CIR is not set
+# CONFIG_IR_FINTEK is not set
+CONFIG_IR_MESON=m
+# CONFIG_IR_MTK is not set
+# CONFIG_IR_NUVOTON is not set
+# CONFIG_IR_REDRAT3 is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_IR_IGORPLUGUSB is not set
+# CONFIG_IR_IGUANA is not set
+# CONFIG_IR_TTUSBIR is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_IR_GPIO_CIR is not set
+# CONFIG_IR_SUNXI is not set
+# CONFIG_IR_SERIAL is not set
+# CONFIG_IR_SIR is not set
+# CONFIG_IR_ZX is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_CEC_SUPPORT is not set
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_CONTROLLER_DVB is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
+CONFIG_V4L2_MEM2MEM_DEV=m
+CONFIG_V4L2_FWNODE=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_MEMOPS=y
+CONFIG_VIDEOBUF2_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_VMALLOC=y
+CONFIG_DVB_CORE=y
+# CONFIG_DVB_NET is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_DVB_MAX_ADAPTERS=16
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
+
+#
+# Media drivers
+#
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_SH_VOU is not set
+# CONFIG_VIDEO_MUX is not set
+# CONFIG_VIDEO_QCOM_CAMSS is not set
+# CONFIG_VIDEO_RENESAS_CEU is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
+# CONFIG_VIDEO_XILINX is not set
+CONFIG_VIDEO_RCAR_CSI2=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_MEDIATEK_VPU is not set
+# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+# CONFIG_VIDEO_SH_VEU is not set
+# CONFIG_VIDEO_RENESAS_FDP1 is not set
+# CONFIG_VIDEO_RENESAS_JPU is not set
+CONFIG_VIDEO_RENESAS_FCP=y
+CONFIG_VIDEO_RENESAS_VSP1=y
+# CONFIG_VIDEO_RENESAS_DEBUG is not set
+CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0
+# CONFIG_VIDEO_QCOM_VENUS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_DVB_PLATFORM_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_SMS_SDIO_DRV is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# I2C Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_ADV7180=y
+# CONFIG_VIDEO_ADV7183 is not set
+CONFIG_VIDEO_ADV748X=y
+CONFIG_VIDEO_ADV7604=y
+CONFIG_VIDEO_ADV7604_CEC=y
+# CONFIG_VIDEO_ADV7842 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_AD5820 is not set
+# CONFIG_VIDEO_DW9714 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TC358743 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV7511 is not set
+# CONFIG_VIDEO_AD9389B is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_THS8200 is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV2640 is not set
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV5640 is not set
+# CONFIG_VIDEO_OV5645 is not set
+# CONFIG_VIDEO_OV5647 is not set
+# CONFIG_VIDEO_OV6650 is not set
+# CONFIG_VIDEO_OV5670 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OV9650 is not set
+# CONFIG_VIDEO_OV13858 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_MT9M032 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9P031 is not set
+# CONFIG_VIDEO_MT9T001 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MT9V032 is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_M5MOLS is not set
+# CONFIG_VIDEO_S5K6AA is not set
+# CONFIG_VIDEO_S5K6A3 is not set
+# CONFIG_VIDEO_S5K4ECGX is not set
+# CONFIG_VIDEO_S5K5BAF is not set
+# CONFIG_VIDEO_SMIAPP is not set
+# CONFIG_VIDEO_ET8EK8 is not set
+# CONFIG_VIDEO_S5C73M3 is not set
+
+#
+# Flash devices
+#
+# CONFIG_VIDEO_ADP1653 is not set
+# CONFIG_VIDEO_AS3645A is not set
+# CONFIG_VIDEO_LM3560 is not set
+# CONFIG_VIDEO_LM3646 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Audio/Video compression chips
+#
+# CONFIG_VIDEO_SAA6752HS is not set
+
+#
+# SDR tuner chips
+#
+
+#
+# Miscellaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# SPI helper chips
+#
+# CONFIG_VIDEO_GS1662 is not set
+CONFIG_MEDIA_TUNER=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MSI001=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2063=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_FC0011=m
+CONFIG_MEDIA_TUNER_FC0012=m
+CONFIG_MEDIA_TUNER_FC0013=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_E4000=m
+CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88RS6000T=m
+CONFIG_MEDIA_TUNER_TUA9001=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_IT913X=m
+CONFIG_MEDIA_TUNER_R820T=m
+CONFIG_MEDIA_TUNER_MXL301RF=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+
+#
+# Customise DVB Frontends
+#
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+CONFIG_DVB_STV090x=m
+CONFIG_DVB_STV0910=m
+CONFIG_DVB_STV6110x=m
+CONFIG_DVB_STV6111=m
+CONFIG_DVB_MXL5XX=m
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+CONFIG_DVB_SI2165=m
+CONFIG_DVB_MN88472=m
+CONFIG_DVB_MN88473=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_ZL10039=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_STV6110=m
+CONFIG_DVB_STV0900=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_CX24117=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_SI21XX=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_DS3000=m
+CONFIG_DVB_MB86A16=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_S5H1432=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_DIB9000=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_AF9013=m
+CONFIG_DVB_EC100=m
+CONFIG_DVB_STV0367=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_CXD2841ER=m
+CONFIG_DVB_RTL2830=m
+CONFIG_DVB_RTL2832=m
+CONFIG_DVB_SI2168=m
+# CONFIG_DVB_AS102_FE is not set
+CONFIG_DVB_ZD1301_DEMOD=m
+# CONFIG_DVB_GP8PSK_FE is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_LGDT3306A=m
+CONFIG_DVB_LG2160=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_DIB8000=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBH25=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_LNBP22=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_ISL6423=m
+CONFIG_DVB_A8293=m
+CONFIG_DVB_SP2=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DVB_LGS8GXX=m
+CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_TDA665x=m
+CONFIG_DVB_IX2505V=m
+CONFIG_DVB_M88RS2000=m
+CONFIG_DVB_AF9033=m
+CONFIG_DVB_HORUS3A=m
+CONFIG_DVB_ASCOT2E=m
+CONFIG_DVB_HELENE=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+CONFIG_TEGRA_HOST1X=m
+CONFIG_TEGRA_HOST1X_FIREWALL=y
+CONFIG_DRM=y
+CONFIG_DRM_MIPI_DSI=y
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+# CONFIG_DRM_DEBUG_MM is not set
+# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+CONFIG_DRM_TTM=m
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+CONFIG_DRM_VM=y
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_AMDGPU is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_PLATFORM_DRIVER=y
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+# CONFIG_DRM_VGEM is not set
+CONFIG_DRM_EXYNOS=m
+
+#
+# CRTCs
+#
+# CONFIG_DRM_EXYNOS_FIMD is not set
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS7_DECON=y
+# CONFIG_DRM_EXYNOS_MIXER is not set
+# CONFIG_DRM_EXYNOS_VIDI is not set
+
+#
+# Encoders and Bridges
+#
+CONFIG_DRM_EXYNOS_DSI=y
+# CONFIG_DRM_EXYNOS_DP is not set
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_MIC=y
+
+#
+# Sub-drivers
+#
+# CONFIG_DRM_EXYNOS_G2D is not set
+# CONFIG_DRM_EXYNOS_IPP is not set
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_DW_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_MSM=y
+# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
+CONFIG_DRM_MSM_HDMI_HDCP=y
+CONFIG_DRM_MSM_DSI=y
+CONFIG_DRM_MSM_DSI_PLL=y
+CONFIG_DRM_MSM_DSI_28NM_PHY=y
+CONFIG_DRM_MSM_DSI_20NM_PHY=y
+CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
+CONFIG_DRM_MSM_DSI_14NM_PHY=y
+CONFIG_DRM_TEGRA=m
+# CONFIG_DRM_TEGRA_DEBUG is not set
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_PANEL_LVDS=y
+CONFIG_DRM_PANEL_SIMPLE=m
+# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_PANEL_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+CONFIG_DRM_DUMB_VGA_DAC=y
+# CONFIG_DRM_LVDS_ENCODER is not set
+# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_SIL_SII8620 is not set
+# CONFIG_DRM_SII902X is not set
+CONFIG_DRM_THINE_THC63LVD1024=y
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+# CONFIG_DRM_TI_TFP410 is not set
+CONFIG_DRM_ANALOGIX_DP=m
+CONFIG_DRM_I2C_ADV7511=y
+# CONFIG_DRM_I2C_ADV7511_AUDIO is not set
+CONFIG_DRM_I2C_ADV7533=y
+CONFIG_DRM_I2C_ADV7511_CEC=y
+CONFIG_DRM_DW_HDMI=y
+# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
+CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
+# CONFIG_DRM_DW_HDMI_CEC is not set
+CONFIG_DRM_VC4=m
+# CONFIG_DRM_VC4_HDMI_CEC is not set
+# CONFIG_DRM_ARCPGU is not set
+CONFIG_DRM_HISI_HIBMC=m
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_HISI_KIRIN_DW_DSI=m
+# CONFIG_DRM_MEDIATEK is not set
+# CONFIG_DRM_ZTE is not set
+# CONFIG_DRM_MXSFB is not set
+CONFIG_DRM_MESON=m
+CONFIG_DRM_MESON_DW_HDMI=m
+# CONFIG_DRM_TINYDRM is not set
+# CONFIG_DRM_PL111 is not set
+# CONFIG_DRM_LEGACY is not set
+# CONFIG_DRM_LIB_RANDOM is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+# CONFIG_FB_S3C is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_XILINX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_XEN_FBDEV_FRONTEND=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_HX8357 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+CONFIG_BACKLIGHT_LP855X=m
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_BACKLIGHT_ARCXCNN is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+# CONFIG_SND_OSSEMUL is not set
+CONFIG_SND_PCM_TIMER=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# HD-Audio
+#
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDA_TEGRA is not set
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_ATMEL_SOC is not set
+CONFIG_SND_BCM2835_SOC_I2S=m
+# CONFIG_SND_DESIGNWARE_I2S is not set
+
+#
+# SoC Audio for Freescale CPUs
+#
+
+#
+# Common SoC Audio options for Freescale CPUs:
+#
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_I2S_HI6210_I2S is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_ROCKCHIP is not set
+CONFIG_SND_SOC_SAMSUNG=y
+# CONFIG_SND_SAMSUNG_PCM is not set
+# CONFIG_SND_SAMSUNG_SPDIF is not set
+# CONFIG_SND_SAMSUNG_I2S is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
+# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
+# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
+# CONFIG_SND_SOC_SNOW is not set
+# CONFIG_SND_SOC_ODROID is not set
+# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set
+
+#
+# SoC Audio support for Renesas SoCs
+#
+# CONFIG_SND_SOC_SH4_FSI is not set
+CONFIG_SND_SOC_RCAR=y
+
+#
+# STMicroelectronics STM32 SOC audio support
+#
+
+#
+# Allwinner SoC Audio support
+#
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SOC_TEGRA is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+# CONFIG_ZX_SPDIF is not set
+# CONFIG_ZX_I2S is not set
+# CONFIG_ZX_TDM is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+
+#
+# CODEC drivers
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU1761_I2C is not set
+# CONFIG_SND_SOC_ADAU1761_SPI is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+CONFIG_SND_SOC_AK4613=y
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS35L34 is not set
+# CONFIG_SND_SOC_CS35L35 is not set
+# CONFIG_SND_SOC_CS42L42 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS43130 is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+# CONFIG_SND_SOC_DIO2125 is not set
+CONFIG_SND_SOC_HDMI_CODEC=y
+# CONFIG_SND_SOC_ES7134 is not set
+# CONFIG_SND_SOC_ES8316 is not set
+# CONFIG_SND_SOC_ES8328_I2C is not set
+# CONFIG_SND_SOC_ES8328_SPI is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX98927 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
+# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8524 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_ZX_AUD96P22 is not set
+# CONFIG_SND_SOC_NAU8540 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_NAU8824 is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+CONFIG_SND_AUDIO_GRAPH_CARD=y
+# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACCUTOUCH is not set
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_ASUS is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CMEDIA is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+CONFIG_HID_ITE=y
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MAYFLASH is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTI is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_RETRODE is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_UDRAW_PS3 is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_ALPS is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_PCI=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_DBGCAP is not set
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_USB_XHCI_MTK is not set
+# CONFIG_USB_XHCI_MVEBU is not set
+CONFIG_USB_XHCI_RCAR=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_EHCI_HCD_ORION=y
+# CONFIG_USB_EHCI_MSM is not set
+# CONFIG_USB_EHCI_TEGRA is not set
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RENESAS_USBHS_HCD is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+CONFIG_USB_RENESAS_USBHS=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MTU3 is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_DUAL_ROLE=y
+
+#
+# Platform Glue Layer
+#
+CONFIG_USB_MUSB_SUNXI=y
+
+#
+# MUSB DMA mode
+#
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_ULPI is not set
+# CONFIG_USB_DWC3_HOST is not set
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_DUAL_ROLE=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_EXYNOS=y
+CONFIG_USB_DWC3_PCI=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_HOST is not set
+
+#
+# Gadget/Dual-role mode requires USB Gadget support to be enabled
+#
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_DUAL_ROLE=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_OF=y
+CONFIG_USB_CHIPIDEA_PCI=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_ULPI=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_ISP1761_UDC=y
+# CONFIG_USB_ISP1760_HOST_ROLE is not set
+# CONFIG_USB_ISP1760_GADGET_ROLE is not set
+CONFIG_USB_ISP1760_DUAL_ROLE=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+# CONFIG_USB_HUB_USB251XB is not set
+CONFIG_USB_HSIC_USB3503=y
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_MSM_OTG is not set
+# CONFIG_USB_QCOM_8X16_PHY is not set
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_RENESAS_USB3=m
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+CONFIG_USB_SNP_CORE=y
+CONFIG_USB_SNP_UDC_PLAT=y
+# CONFIG_USB_M66592 is not set
+CONFIG_USB_BDC_UDC=y
+
+#
+# Platform Support
+#
+CONFIG_USB_BDC_PCI=y
+# CONFIG_USB_AMD5536UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_CONFIGFS is not set
+
+#
+# USB Power Delivery and Type-C drivers
+#
+# CONFIG_TYPEC_UCSI is not set
+# CONFIG_USB_LED_TRIG is not set
+CONFIG_USB_ULPI_BUS=y
+CONFIG_USB_ROLE_SWITCH=m
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_QCOM_DML=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_TEGRA=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+CONFIG_MMC_SDHCI_F_SDH30=y
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=y
+CONFIG_MMC_TMIO_CORE=y
+CONFIG_MMC_SDHI=y
+# CONFIG_MMC_SDHI_SYS_DMAC is not set
+CONFIG_MMC_SDHI_INTERNAL_DMAC=y
+# CONFIG_MMC_SDHI_PIO is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MMC_CAVIUM_THUNDERX is not set
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_ROCKCHIP=y
+# CONFIG_MMC_DW_ZX is not set
+# CONFIG_MMC_SH_MMCIF is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+CONFIG_MMC_SUNXI=y
+# CONFIG_MMC_TOSHIBA_PCI is not set
+CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_MTK is not set
+CONFIG_MMC_SDHCI_BRCMSTB=y
+CONFIG_MMC_SDHCI_XENON=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_PWM=y
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_SYSCON=y
+# CONFIG_LEDS_USER is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+CONFIG_LEDS_TRIGGER_DISK=y
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_CPU=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+CONFIG_LEDS_TRIGGER_PANIC=y
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EDAC=y
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_GHES=y
+# CONFIG_EDAC_LAYERSCAPE is not set
+# CONFIG_EDAC_THUNDERX is not set
+# CONFIG_EDAC_XGENE is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+CONFIG_RTC_NVMEM=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+CONFIG_RTC_DRV_BRCMSTB=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+CONFIG_RTC_DRV_S5M=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_DS3232_HWMON=y
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+CONFIG_RTC_DRV_EFI=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_HAVE_S3C_RTC=y
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_PL030 is not set
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_RTC_DRV_ARMADA38X=y
+# CONFIG_RTC_DRV_FTRTC010 is not set
+# CONFIG_RTC_DRV_PM8XXX is not set
+CONFIG_RTC_DRV_TEGRA=y
+# CONFIG_RTC_DRV_SNVS is not set
+CONFIG_RTC_DRV_XGENE=y
+# CONFIG_RTC_DRV_R7301 is not set
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_OF=y
+# CONFIG_ALTERA_MSGDMA is not set
+# CONFIG_AMBA_PL08X is not set
+CONFIG_BCM_SBA_RAID=m
+CONFIG_DMA_BCM2835=m
+# CONFIG_DMA_SUN6I is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_INTEL_IDMA64 is not set
+CONFIG_K3_DMA=y
+# CONFIG_MV_XOR is not set
+CONFIG_MV_XOR_V2=y
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+# CONFIG_TEGRA210_ADMA is not set
+# CONFIG_XGENE_DMA is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_ZX_DMA is not set
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_RENESAS_DMA=y
+CONFIG_SH_DMAE_BASE=y
+# CONFIG_SH_DMAE is not set
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+# CONFIG_SUDMAC is not set
+
+#
+# DMA Clients
+#
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
+
+#
+# DMABUF options
+#
+CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_VFIO_IOMMU_TYPE1=y
+CONFIG_VFIO_VIRQFD=y
+CONFIG_VFIO=y
+# CONFIG_VFIO_NOIOMMU is not set
+CONFIG_VFIO_PCI=y
+CONFIG_VFIO_PCI_MMAP=y
+CONFIG_VFIO_PCI_INTX=y
+# CONFIG_VFIO_PLATFORM is not set
+# CONFIG_VFIO_MDEV is not set
+CONFIG_IRQ_BYPASS_MANAGER=y
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=y
+# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+# CONFIG_HYPERV_TSCPAGE is not set
+
+#
+# Xen driver support
+#
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=y
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_SWIOTLB_XEN=y
+# CONFIG_XEN_PVCALLS_BACKEND is not set
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_EFI=y
+CONFIG_XEN_AUTO_XLATE=y
+# CONFIG_STAGING is not set
+# CONFIG_GOLDFISH is not set
+CONFIG_CHROME_PLATFORMS=y
+# CONFIG_CROS_EC_CHARDEV is not set
+CONFIG_CROS_EC_PROTO=y
+# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+CONFIG_COMMON_CLK_VERSATILE=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_CLK_HSDK is not set
+# CONFIG_COMMON_CLK_MAX77686 is not set
+CONFIG_COMMON_CLK_RK808=y
+# CONFIG_COMMON_CLK_HI655X is not set
+CONFIG_COMMON_CLK_SCPI=y
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMMON_CLK_NXP is not set
+CONFIG_COMMON_CLK_PWM=y
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_IPROC=y
+CONFIG_CLK_BCM_NS2=y
+CONFIG_CLK_BCM_SR=y
+CONFIG_COMMON_CLK_HI3516CV300=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI3660=y
+CONFIG_COMMON_CLK_HI3798CV200=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_RESET_HISI=y
+CONFIG_STUB_CLK_HI6220=y
+CONFIG_COMMON_CLK_MEDIATEK=y
+CONFIG_COMMON_CLK_MT6797=y
+# CONFIG_COMMON_CLK_MT6797_MMSYS is not set
+# CONFIG_COMMON_CLK_MT6797_IMGSYS is not set
+# CONFIG_COMMON_CLK_MT6797_VDECSYS is not set
+# CONFIG_COMMON_CLK_MT6797_VENCSYS is not set
+CONFIG_COMMON_CLK_MT8173=y
+CONFIG_COMMON_CLK_AMLOGIC=y
+CONFIG_COMMON_CLK_GXBB=y
+CONFIG_ARMADA_37XX_CLK=y
+CONFIG_ARMADA_AP806_SYSCON=y
+CONFIG_ARMADA_CP110_SYSCON=y
+CONFIG_QCOM_GDSC=y
+CONFIG_QCOM_RPMCC=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+# CONFIG_IPQ_GCC_4019 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_LCC_806X is not set
+CONFIG_IPQ_GCC_8074=y
+# CONFIG_MSM_GCC_8660 is not set
+CONFIG_MSM_GCC_8916=y
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+CONFIG_MSM_GCC_8994=y
+CONFIG_MSM_GCC_8996=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_CLK_RENESAS=y
+CONFIG_CLK_R8A7795=y
+CONFIG_CLK_R8A7796=y
+CONFIG_CLK_R8A77965=y
+CONFIG_CLK_R8A77970=y
+CONFIG_CLK_R8A77980=y
+CONFIG_CLK_R8A77990=y
+CONFIG_CLK_R8A77995=y
+CONFIG_CLK_RCAR_GEN3_CPG=y
+# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
+CONFIG_CLK_RENESAS_CPG_MSSR=y
+CONFIG_CLK_RENESAS_DIV6=y
+CONFIG_COMMON_CLK_SAMSUNG=y
+CONFIG_EXYNOS_ARM64_COMMON_CLK=y
+CONFIG_EXYNOS_AUDSS_CLK_CON=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUN50I_A64_CCU=y
+# CONFIG_SUN8I_A83T_CCU is not set
+CONFIG_SUN8I_H3_CCU=y
+# CONFIG_SUN8I_DE2_CCU is not set
+CONFIG_SUN8I_R_CCU=y
+CONFIG_CLK_TEGRA_BPMP=y
+CONFIG_CLK_UNIPHIER=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+# CONFIG_HWSPINLOCK_SPRD is not set
+CONFIG_HWSPINLOCK_RCAR=y
+
+#
+# Clock Source drivers
+#
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_ACPI=y
+CONFIG_TIMER_PROBE=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_HISILICON_ERRATUM_161010101=y
+CONFIG_ARM64_ERRATUM_858921=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_ATMEL_PIT is not set
+CONFIG_MTK_TIMER=y
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_CLKSRC_VERSATILE=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+CONFIG_PLATFORM_MHU=y
+# CONFIG_PL320_MBOX is not set
+# CONFIG_ROCKCHIP_MBOX is not set
+CONFIG_PCC=y
+# CONFIG_ALTERA_MBOX is not set
+CONFIG_BCM2835_MBOX=y
+CONFIG_HI6220_MBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_TEGRA_HSP_MBOX=y
+# CONFIG_XGENE_SLIMPRO_MBOX is not set
+# CONFIG_BCM_PDC_MBOX is not set
+CONFIG_BCM_FLEXRM_MBOX=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+CONFIG_IOMMU_IO_PGTABLE=y
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+CONFIG_IOMMU_IOVA=y
+CONFIG_OF_IOMMU=y
+CONFIG_IOMMU_DMA=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_TEGRA_IOMMU_SMMU=y
+# CONFIG_EXYNOS_IOMMU is not set
+CONFIG_IPMMU_VMSA=y
+CONFIG_IPMMU_VMSA_CTX_NUM=8
+CONFIG_IPMMU_VMSA_WHITELIST=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_MTK_IOMMU is not set
+# CONFIG_QCOM_IOMMU is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_REMOTEPROC is not set
+
+#
+# Rpmsg drivers
+#
+CONFIG_RPMSG=y
+# CONFIG_RPMSG_CHAR is not set
+# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
+CONFIG_RPMSG_QCOM_SMD=y
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Amlogic SoC drivers
+#
+CONFIG_MESON_GX_SOCINFO=y
+
+#
+# Broadcom SoC drivers
+#
+CONFIG_RASPBERRYPI_POWER=y
+# CONFIG_SOC_BRCMSTB is not set
+CONFIG_FSL_GUTS=y
+
+#
+# i.MX SoC drivers
+#
+CONFIG_MTK_INFRACFG=y
+# CONFIG_MTK_PMIC_WRAP is not set
+CONFIG_MTK_SCPSYS=y
+
+#
+# Qualcomm SoC drivers
+#
+# CONFIG_QCOM_GSBI is not set
+CONFIG_QCOM_MDT_LOADER=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMEM_STATE=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+# CONFIG_QCOM_WCNSS_CTRL is not set
+CONFIG_SOC_RENESAS=y
+CONFIG_RCAR_CPU_TOPOLOGY=y
+CONFIG_SYSC_R8A7795=y
+CONFIG_SYSC_R8A7796=y
+CONFIG_SYSC_R8A77965=y
+CONFIG_SYSC_R8A77970=y
+CONFIG_SYSC_R8A77980=y
+CONFIG_SYSC_R8A77990=y
+CONFIG_SYSC_R8A77995=y
+CONFIG_RST_RCAR=y
+CONFIG_SYSC_RCAR=y
+CONFIG_RCAR_THERMAL_EMS=y
+CONFIG_RCAR_POWER_AVS=y
+CONFIG_ROCKCHIP_GRF=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_SOC_SAMSUNG=y
+CONFIG_EXYNOS_PMU=y
+CONFIG_EXYNOS_PM_DOMAINS=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_SOC_TEGRA_FUSE=y
+CONFIG_SOC_TEGRA_FLOWCTRL=y
+CONFIG_SOC_TEGRA_PMC=y
+CONFIG_SOC_TEGRA_PMC_TEGRA186=y
+CONFIG_SOC_TEGRA_POWERGATE_BPMP=y
+# CONFIG_SOC_TI is not set
+# CONFIG_SOC_ZTE is not set
+CONFIG_PM_DEVFREQ=y
+
+#
+# DEVFREQ Governors
+#
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_DEVFREQ_GOV_PASSIVE=y
+
+#
+# DEVFREQ Drivers
+#
+# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
+# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
+# CONFIG_PM_DEVFREQ_EVENT is not set
+CONFIG_EXTCON=y
+
+#
+# Extcon Device Drivers
+#
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_AXP288 is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+CONFIG_EXTCON_USB_GPIO=y
+# CONFIG_EXTCON_USBC_CROS_EC is not set
+CONFIG_MEMORY=y
+# CONFIG_ARM_PL172_MPMC is not set
+CONFIG_TEGRA_MC=y
+CONFIG_IIO=y
+# CONFIG_IIO_BUFFER is not set
+# CONFIG_IIO_CONFIGFS is not set
+# CONFIG_IIO_TRIGGER is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+
+#
+# Accelerometers
+#
+# CONFIG_ADXL345_I2C is not set
+# CONFIG_ADXL345_SPI is not set
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_DA280 is not set
+# CONFIG_DA311 is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_DMARD10 is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_MC3230 is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_SCA3000 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+
+#
+# Analog to digital converters
+#
+# CONFIG_AD7266 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7766 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_AXP20X_ADC is not set
+# CONFIG_AXP288_ADC is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BERLIN2_ADC is not set
+# CONFIG_CC10001_ADC is not set
+# CONFIG_ENVELOPE_DETECTOR is not set
+CONFIG_EXYNOS_ADC=y
+# CONFIG_HI8435 is not set
+# CONFIG_HX711 is not set
+# CONFIG_INA2XX_ADC is not set
+# CONFIG_LTC2471 is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_LTC2497 is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX11100 is not set
+# CONFIG_MAX1118 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MAX9611 is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MEDIATEK_MT6577_AUXADC is not set
+CONFIG_MESON_SARADC=y
+# CONFIG_NAU7802 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+CONFIG_ROCKCHIP_SARADC=m
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC084S021 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC108S102 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS7950 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_TI_TLC4541 is not set
+# CONFIG_VF610_ADC is not set
+
+#
+# Amplifiers
+#
+# CONFIG_AD8366 is not set
+
+#
+# Chemical Sensors
+#
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_CCS811 is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_VZ89X is not set
+# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set
+
+#
+# Hid Sensor IIO Common
+#
+
+#
+# SSP Sensor Common
+#
+# CONFIG_IIO_SSP_SENSORHUB is not set
+
+#
+# Counters
+#
+
+#
+# Digital to analog converters
+#
+# CONFIG_AD5064 is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_LTC2632 is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_DPOT_DAC is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_VF610_DAC is not set
+
+#
+# IIO dummy driver
+#
+
+#
+# Frequency Synthesizers DDS/PLL
+#
+
+#
+# Clock Generator/Distribution
+#
+# CONFIG_AD9523 is not set
+
+#
+# Phase-Locked Loop (PLL) frequency synthesizers
+#
+# CONFIG_ADF4350 is not set
+
+#
+# Digital gyroscope sensors
+#
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADXRS450 is not set
+# CONFIG_BMG160 is not set
+# CONFIG_MPU3050_I2C is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_ITG3200 is not set
+
+#
+# Health Sensors
+#
+
+#
+# Heart Rate Monitors
+#
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_MAX30100 is not set
+# CONFIG_MAX30102 is not set
+
+#
+# Humidity sensors
+#
+# CONFIG_AM2315 is not set
+# CONFIG_DHT11 is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HTS221 is not set
+# CONFIG_HTU21 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+
+#
+# Inertial measurement units
+#
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_KMX61 is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_SPI is not set
+# CONFIG_IIO_ST_LSM6DSX is not set
+
+#
+# Light sensors
+#
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM3605 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_SENSORS_ISL29018 is not set
+# CONFIG_SENSORS_ISL29028 is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_JSA1212 is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_LTR501 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_OPT3001 is not set
+# CONFIG_PA12203001 is not set
+# CONFIG_SI1145 is not set
+# CONFIG_STK3310 is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL2583 is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_US5182D is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VEML6070 is not set
+# CONFIG_VL6180 is not set
+
+#
+# Magnetometer sensors
+#
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AK09911 is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+
+#
+# Multiplexers
+#
+# CONFIG_IIO_MUX is not set
+
+#
+# Inclinometer sensors
+#
+
+#
+# Digital potentiometers
+#
+# CONFIG_DS1803 is not set
+# CONFIG_MAX5481 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_TPL0102 is not set
+
+#
+# Digital potentiostats
+#
+# CONFIG_LMP91000 is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_ABP060MG is not set
+# CONFIG_BMP280 is not set
+# CONFIG_HP03 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_T5403 is not set
+# CONFIG_HP206C is not set
+# CONFIG_ZPA2326 is not set
+
+#
+# Lightning sensors
+#
+# CONFIG_AS3935 is not set
+
+#
+# Proximity and distance sensors
+#
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_SRF04 is not set
+# CONFIG_SX9500 is not set
+# CONFIG_SRF08 is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TMP007 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_PWM_BCM_IPROC=y
+CONFIG_PWM_BCM2835=m
+# CONFIG_PWM_BERLIN is not set
+# CONFIG_PWM_BRCMSTB is not set
+CONFIG_PWM_CROS_EC=m
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_HIBVT is not set
+CONFIG_PWM_MESON=m
+# CONFIG_PWM_MTK_DISP is not set
+# CONFIG_PWM_MEDIATEK is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWM_RCAR=y
+# CONFIG_PWM_RENESAS_TPU is not set
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
+# CONFIG_PWM_SUN4I is not set
+CONFIG_PWM_TEGRA=m
+# CONFIG_PWM_ZX is not set
+CONFIG_IRQCHIP=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ALPINE_MSI=y
+CONFIG_BRCMSTB_L2_IRQ=y
+CONFIG_DW_APB_ICTL=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
+CONFIG_RENESAS_IRQC=y
+CONFIG_MVEBU_GICP=y
+CONFIG_MVEBU_ICU=y
+CONFIG_MVEBU_ODMI=y
+CONFIG_MVEBU_PIC=y
+CONFIG_LS_SCFG_MSI=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_QCOM_IRQ_COMBINER=y
+CONFIG_IRQ_UNIPHIER_AIDET=y
+# CONFIG_IPACK_BUS is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+CONFIG_RESET_BERLIN=y
+# CONFIG_RESET_IMX7 is not set
+# CONFIG_RESET_LANTIQ is not set
+# CONFIG_RESET_LPC18XX is not set
+CONFIG_RESET_MESON=y
+# CONFIG_RESET_PISTACHIO is not set
+CONFIG_RESET_SOCFPGA=y
+# CONFIG_RESET_STM32 is not set
+CONFIG_RESET_SUNXI=y
+# CONFIG_RESET_TI_SYSCON is not set
+CONFIG_RESET_UNIPHIER=y
+# CONFIG_RESET_ZX2967 is not set
+# CONFIG_RESET_ZYNQ is not set
+CONFIG_COMMON_RESET_HI3660=y
+CONFIG_COMMON_RESET_HI6220=y
+CONFIG_RESET_TEGRA_BPMP=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_SUN4I_USB=y
+# CONFIG_PHY_SUN9I_USB is not set
+CONFIG_PHY_MESON8B_USB2=y
+CONFIG_PHY_MESON_GXL_USB2=y
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_PHY_BCM_NS_USB2 is not set
+# CONFIG_PHY_BCM_NS_USB3 is not set
+CONFIG_PHY_NS2_PCIE=y
+CONFIG_PHY_NS2_USB_DRD=y
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_PHY_HI6220_USB=y
+# CONFIG_PHY_BERLIN_SATA is not set
+# CONFIG_PHY_BERLIN_USB is not set
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_MTK_TPHY is not set
+# CONFIG_PHY_CPCAP_USB is not set
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PHY_QCOM_USB_HS=y
+# CONFIG_PHY_QCOM_USB_HSIC is not set
+# CONFIG_PHY_RCAR_GEN2 is not set
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=y
+# CONFIG_PHY_ROCKCHIP_DP is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
+# CONFIG_PHY_ROCKCHIP_TYPEC is not set
+# CONFIG_PHY_ROCKCHIP_USB is not set
+CONFIG_PHY_EXYNOS_DP_VIDEO=y
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
+# CONFIG_PHY_EXYNOS_PCIE is not set
+CONFIG_PHY_SAMSUNG_USB2=y
+# CONFIG_PHY_EXYNOS4210_USB2 is not set
+# CONFIG_PHY_EXYNOS4X12_USB2 is not set
+# CONFIG_PHY_EXYNOS5250_USB2 is not set
+CONFIG_PHY_EXYNOS5_USBDRD=y
+CONFIG_PHY_TEGRA_XUSB=y
+# CONFIG_PHY_TUSB1210 is not set
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+CONFIG_ARM_PMU=y
+CONFIG_ARM_PMU_ACPI=y
+CONFIG_QCOM_L2_PMU=y
+CONFIG_QCOM_L3_PMU=y
+# CONFIG_XGENE_PMU is not set
+CONFIG_RAS=y
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_DAX is not set
+CONFIG_NVMEM=y
+# CONFIG_MTK_EFUSE is not set
+CONFIG_QCOM_QFPROM=y
+# CONFIG_ROCKCHIP_EFUSE is not set
+CONFIG_NVMEM_BCM_OCOTP=y
+# CONFIG_NVMEM_SUNXI_SID is not set
+CONFIG_MESON_EFUSE=m
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+# CONFIG_FPGA is not set
+
+#
+# FSI support
+#
+# CONFIG_FSI is not set
+CONFIG_TEE=y
+
+#
+# TEE drivers
+#
+CONFIG_OPTEE=y
+
+#
+# Firmware Drivers
+#
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_PSCI_CHECKER is not set
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_DMIID=y
+# CONFIG_DMI_SYSFS is not set
+CONFIG_RASPBERRYPI_FIRMWARE=y
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_64=y
+CONFIG_HAVE_ARM_SMCCC=y
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# CONFIG_EFI_VARS is not set
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_ARMSTUB=y
+CONFIG_EFI_CAPSULE_LOADER=y
+# CONFIG_EFI_TEST is not set
+# CONFIG_RESET_ATTACK_MITIGATION is not set
+CONFIG_UEFI_CPER=y
+# CONFIG_EFI_DEV_PATH_PARSER is not set
+CONFIG_MESON_SM=y
+
+#
+# Tegra firmware driver
+#
+CONFIG_TEGRA_IVC=y
+CONFIG_TEGRA_BPMP=y
+CONFIG_ACPI=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_CCA_REQUIRED=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SPCR_TABLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_MCFG=y
+CONFIG_ACPI_CPPC_LIB=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+# CONFIG_ACPI_BGRT is not set
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+CONFIG_HAVE_ACPI_APEI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_SEA=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_EINJ=y
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_ACPI_CONFIGFS is not set
+CONFIG_ACPI_IORT=y
+CONFIG_ACPI_GTDT=y
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_FS_DAX is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
+# CONFIG_OVERLAY_FS_INDEX is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XZ is not set
+# CONFIG_SQUASHFS_ZSTD is not set
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_PSTORE=y
+CONFIG_PSTORE_ZLIB_COMPRESS=y
+# CONFIG_PSTORE_LZO_COMPRESS is not set
+# CONFIG_PSTORE_LZ4_COMPRESS is not set
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_PMSG is not set
+# CONFIG_PSTORE_RAM is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V2=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_SWAP is not set
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PNFS_FILE_LAYOUT=y
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+# CONFIG_NFS_V4_1_MIGRATION is not set
+CONFIG_NFS_V4_SECURITY_LABEL=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFSD is not set
+CONFIG_GRACE_PERIOD=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BACKCHANNEL=y
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_PMU=y
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+# CONFIG_GDB_SCRIPTS is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+# CONFIG_KCOV is not set
+# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
+# CONFIG_SOFTLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_INFO=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_DEBUG_PREEMPT is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_WW_MUTEX_SELFTEST is not set
+# CONFIG_STACKTRACE is not set
+# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_SYSCTL is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_TEST_KMOD is not set
+CONFIG_MEMTEST=y
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM64_PTDUMP_CORE is not set
+# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+# CONFIG_DEBUG_WX is not set
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_DEBUG_EFI is not set
+# CONFIG_ARM64_RELOC_TEST is not set
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_COMPAT=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_WRITABLE_HOOKS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+# CONFIG_HARDENED_USERCOPY is not set
+# CONFIG_FORTIFY_SOURCE is not set
+# CONFIG_STATIC_USERMODEHELPER is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_LOADPIN is not set
+# CONFIG_SECURITY_YAMA is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+CONFIG_INTEGRITY_AUDIT=y
+# CONFIG_IMA is not set
+# CONFIG_EVM is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
+CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_KPP2=y
+CONFIG_CRYPTO_KPP=m
+CONFIG_CRYPTO_ACOMP2=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_DH is not set
+CONFIG_CRYPTO_ECDH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_ENGINE=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=y
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_GHASH=m
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_TI is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_CHACHA20=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
+# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
+# CONFIG_CRYPTO_DEV_S5P is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CAVIUM_CPT is not set
+# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
+# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+CONFIG_CRYPTO_DEV_VIRTIO=m
+CONFIG_CRYPTO_DEV_BCM_SPU=m
+# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+
+#
+# Certificates for signature checking
+#
+# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA512_ARM64=m
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_CRC32_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_AES_ARM64_BS=m
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC4 is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+# CONFIG_CRC8 is not set
+CONFIG_XXHASH=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_AUDIT_COMPAT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_ZSTD_COMPRESS=m
+CONFIG_ZSTD_DECOMPRESS=m
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_RADIX_TREE_MULTIORDER=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+# CONFIG_DMA_NOOP_OPS is not set
+# CONFIG_DMA_VIRT_OPS is not set
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+# CONFIG_IRQ_POLL is not set
+CONFIG_LIBFDT=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_SBITMAP=y
+# CONFIG_STRING_SELFTEST is not set
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/iccom.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/iccom.cfg
new file mode 100644
index 00000000..a3923c19
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/iccom.cfg
@@ -0,0 +1 @@
+CONFIG_RPMSG_VIRTIO=y
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg
new file mode 100644
index 00000000..327c753a
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg
@@ -0,0 +1 @@
+CONFIG_HID_MULTITOUCH=y
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg
new file mode 100644
index 00000000..7446787d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg
@@ -0,0 +1,68 @@
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb3.cfg b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb3.cfg
new file mode 100644
index 00000000..f58b942c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb3.cfg
@@ -0,0 +1,4 @@
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE="r8a779x_usb3_v2.dlmem r8a779x_usb3_v3.dlmem"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.14.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.14.bb
new file mode 100644
index 00000000..9dac5ff1
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.14.bb
@@ -0,0 +1,85 @@
+DESCRIPTION = "Linux kernel for the R-Car Generation 3 based board"
+
+require include/avb-control.inc
+require include/iccom-control.inc
+require recipes-kernel/linux/linux-yocto.inc
+require include/cas-control.inc
+require include/adsp-control.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/:"
+COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb|m3nulcb|ebisu"
+
+RENESAS_BSP_URL = " \
+    git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git"
+BRANCH = "v4.14.75-ltsi/rcar-3.9.6"
+SRCREV = "1d76a004d3a19367669b861559c1fbbf546b3065"
+
+SRC_URI = "${RENESAS_BSP_URL};protocol=git;nocheckout=1;branch=${BRANCH}"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+# Fix inaccessible SSI for Renesas ADSP firmware
+SRC_URI_append = " \
+    file://0001-Revert-ASoC-rsnd-ssi-wait-maximum-5ms-for-status-che.patch \
+"
+
+LINUX_VERSION ?= "4.14.75"
+PV = "${LINUX_VERSION}+git${SRCPV}"
+PR = "r1"
+
+SRC_URI_append = " \
+    file://defconfig \
+    file://touch.cfg \
+    ${@oe.utils.conditional("USE_AVB", "1", " file://usb-video-class.cfg", "", d)} \
+"
+
+# Enable RPMSG_VIRTIO depend on ICCOM
+SUPPORT_ICCOM = " \
+    file://0001-rpmsg-Add-message-to-be-able-to-configure-RPMSG_VIRT.patch \
+    file://iccom.cfg \
+"
+
+SRC_URI_append = " \
+    ${@oe.utils.conditional("USE_ICCOM", "1", "${SUPPORT_ICCOM}", "", d)} \
+"
+
+# Add SCHED_DEBUG config fragment to support CAS
+SRC_URI_append = " \
+    ${@oe.utils.conditional("USE_CAS", "1", " file://capacity_aware_migration_strategy.cfg", "",d)} \
+"
+
+# Add ADSP ALSA driver
+SUPPORT_ADSP_ASOC = " \
+    file://0001-ADSP-add-document-for-compatible-string-renesas-rcar.patch \
+    file://0002-ADSP-add-ADSP-sound-driver-source.patch \
+    file://0003-ADSP-add-build-for-ADSP-sound-driver.patch \
+    file://0004-ADSP-integrate-ADSP-sound-for-H3-M3-M3N-board.patch \
+    file://0005-ADSP-integrate-ADSP-sound-for-E3-board.patch \
+    file://0006-ADSP-remove-HDMI-support-from-rcar-sound.patch \
+    file://adsp.cfg \
+"
+
+SRC_URI_append = " \
+    ${@oe.utils.conditional("USE_ADSP", "1", "${SUPPORT_ADSP_ASOC}", "", d)} \
+"
+
+# Install USB3.0 firmware to rootfs
+USB3_FIRMWARE_V2 = "https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/r8a779x_usb3_v2.dlmem;md5sum=645db7e9056029efa15f158e51cc8a11"
+USB3_FIRMWARE_V3 = "https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/r8a779x_usb3_v3.dlmem;md5sum=687d5d42f38f9850f8d5a6071dca3109"
+
+SRC_URI_append = " \
+    ${USB3_FIRMWARE_V2} \
+    ${USB3_FIRMWARE_V3} \
+    ${@bb.utils.contains('MACHINE_FEATURES','usb3','file://usb3.cfg','',d)} \
+"
+
+# W/A Fix build issue with Linux v4.14
+SRC_URI_append = " \
+    file://0001-arm64-bpf-correct-broken-uapi-for-BPF_PROG_TYPE_PERF.patch \
+"
+
+do_download_firmware () {
+    install -m 755 ${WORKDIR}/r8a779x_usb3_v*.dlmem ${STAGING_KERNEL_DIR}/firmware
+}
+
+addtask do_download_firmware after do_configure before do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb
new file mode 100644
index 00000000..b264cbb5
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb
@@ -0,0 +1,31 @@
+DESCRIPTION = "ADSP Framework for Linux"
+LICENSE = "CLOSED"
+
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "adsp"
+
+SRC_URI = "file://RCG3AHFWN0201ZDP.tar.gz"
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/RCG3AHFWN0201ZDP"
+
+do_install() {
+    # create the firmware dir
+    install -d ${D}/lib/firmware
+
+    # install the firmware bin
+    install -m 0644 ${S}/lib/firmware/xf-rcar.fw ${D}/lib/firmware
+}
+
+PACKAGES = " \
+    ${PN} \
+"
+
+FILES_${PN} = " \
+    /lib/firmware \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb
new file mode 100644
index 00000000..52b26271
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb
@@ -0,0 +1,61 @@
+DESCRIPTION = "ADSP Interface for Linux"
+LICENSE = "CLOSED"
+
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "adsp"
+
+DEPENDS += "kernel-module-xtensa-hifi"
+
+SRC_URI = "file://RCG3AHIFL4101ZDP.tar.gz"
+
+S = "${WORKDIR}/RCG3AHIFL4101ZDP"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+# Don't need to do_configure
+do_configure[noexec] = "1"
+
+# Don't use EXTRA_OEMAKE default value to avoid default CFLAGS, LDFLAGS
+# of poky override the CFLAGS, LDFLAGS inside RCG3AHIFL4101ZDP/Makefile
+EXTRA_OEMAKE = "INCSHARED=${STAGING_INCDIR}"
+CFLAGS += "-Wno-packed-not-aligned"
+
+do_compile() {
+    cd ${S}
+    oe_runmake
+}
+
+do_install() {
+    # Create destination directory
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+    install -d ${D}/${includedir}/sys/fio
+    install -d ${D}/${includedir}/os/linux
+
+    # Copy library
+    install -m 0755 ${S}/libRCG3AHIFL4101ZDP.so.1.0 ${D}/${libdir}
+
+    # Copy shared header files
+    install -m 0644 ${S}/include/*.h ${D}/${includedir}
+    install -m 0644 ${S}/include/sys/fio/*.h ${D}/${includedir}/sys/fio/
+    install -m 0644 ${S}/include/os/linux/*.h ${D}/${includedir}/os/linux/
+
+    # Create the symbolic link
+    cd ${D}/${libdir}
+    ln -s libRCG3AHIFL4101ZDP.so.1.0 libRCG3AHIFL4101ZDP.so.1
+    ln -s libRCG3AHIFL4101ZDP.so.1 libRCG3AHIFL4101ZDP.so
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+FILES_${PN} += " \
+    ${libdir}/*.so* \
+    ${includedir} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc
new file mode 100644
index 00000000..0a46e7b3
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc
@@ -0,0 +1,8 @@
+require include/rcar-gen3-modules-common.inc
+
+inherit distro_features_check
+
+REQUIRED_DISTRO_FEATURES = "avb"
+
+SRC_URI = "git://github.com/renesas-rcar/avb-applications.git;branch=rcar-gen3"
+SRCREV = "8398f6e66eaf487eaf8e9a2a8d60f222456c06a6"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb
new file mode 100644
index 00000000..e668d13b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb
@@ -0,0 +1,121 @@
+DESCRIPTION = "Renesas Ethernet AVB demo applications"
+
+require avb-applications.inc
+
+LICENSE = "MIT & BSD"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \
+    file://lib/msrp/LICENSE.BSD;md5=60ba0ea0afdcbf8d26ce31ce1503aba3 \
+    file://lib/avdecc/jdksavdecc-c/COPYRIGHT;md5=6592ded5140540a936b8d98ed1b6a577 \
+    file://avblauncher/inih/LICENSE.txt;md5=a7a95d2af90376e85a05318794e6f202 \
+"
+
+DEPENDS = "kernel-module-avb-streaming libyaml cmake-native"
+
+S = "${WORKDIR}/git/avb-demoapps"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    export http_proxy=${http_proxy}
+    export https_proxy=${https_proxy}
+    export HTTP_PROXY=${HTTP_PROXY}
+    export HTTPS_PROXY=${HTTPS_PROXY}
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+EXTRA_OEMAKE = "'CC=${CC}' 'AR=${AR}'"
+
+do_install_append() {
+    oe_runmake install INSTALL_DIR=${D}/${bindir}
+
+    # Create install directories
+    install -d ${D}/${sysconfdir}/linuxptp
+    install -d ${D}/${sysconfdir}/daemon_cl
+    install -d ${D}/${sysconfdir}/avblauncher
+
+    # Install
+    install -m 644 ${S}/etc/linuxptp/avb-demoapps.cfg ${D}/${sysconfdir}/linuxptp
+    install -m 644 ${S}/etc/daemon_cl/gptp_cfg.ini ${D}/${sysconfdir}/daemon_cl
+    install -m 755 ${S}/etc/avblauncher/mse_aaf_pcm.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_h264.sh ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_h264_d13.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_cvf_mjpeg.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_iec61883_4.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/mse_iec61883_6.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 755 ${S}/etc/avblauncher/simple_application.sh ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/simple_listener.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/simple_talker.ini ${D}/${sysconfdir}/avblauncher
+    install -m 644 ${S}/etc/avblauncher/avdecc_entity_audio.yaml ${D}/${sysconfdir}/avblauncher
+}
+
+PACKAGES =+ " \
+    ${PN}-simple \
+    ${PN}-mrpdummy \
+    ${PN}-avblauncher \
+"
+
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-mrpdummy = " \
+    ${bindir}/mrpdummy \
+"
+
+FILES_${PN}-avblauncher = " \
+    ${sysconfdir}/daemon_cl/gptp_cfg.ini \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm.sh \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm_listener.ini \
+    ${sysconfdir}/avblauncher/mse_aaf_pcm_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_d13_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_h264_talker.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg.sh \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg_listener.ini \
+    ${sysconfdir}/avblauncher/mse_cvf_mjpeg_talker.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_4.sh \
+    ${sysconfdir}/avblauncher/mse_iec61883_4_listener.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_4_talker.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_6.sh \
+    ${sysconfdir}/avblauncher/mse_iec61883_6_listener.ini \
+    ${sysconfdir}/avblauncher/mse_iec61883_6_talker.ini \
+    ${sysconfdir}/avblauncher/simple_application.sh \
+    ${sysconfdir}/avblauncher/simple_listener.ini \
+    ${sysconfdir}/avblauncher/simple_talker.ini \
+    ${sysconfdir}/avblauncher/avdecc_entity_audio.yaml \
+    ${bindir}/avblauncher \
+"
+
+FILES_${PN}-simple = " \
+    ${sysconfdir}/linuxptp/avb-demoapps.cfg \
+    ${bindir}/simple_talker \
+    ${bindir}/simple_listener \
+"
+
+RDEPENDS_${PN} = " \
+    ${PN}-simple \
+    ${PN}-avblauncher \
+"
+
+RDEPENDS_${PN}-avblauncher = " \
+    ${PN}-mrpdummy \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb
new file mode 100644
index 00000000..5c002776
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb
@@ -0,0 +1,17 @@
+DESCRIPTION = "Utility tool of the AVB Streaming Driver for Linux for the R-Car Gen3"
+
+require avb-applications.inc
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9"
+
+DEPENDS = "kernel-module-avb-streaming"
+
+S = "${WORKDIR}/git/avbtool"
+
+EXTRA_OEMAKE = "'CC=${CC}'"
+
+do_install_append() {
+    install -d ${D}/${bindir}
+    install -m 755 ${S}/avbtool ${D}/${bindir}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb
new file mode 100644
index 00000000..094d3265
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb
@@ -0,0 +1,74 @@
+DESCRIPTION = "R-Car Gen3 Color Management System"
+LICENSE = "CLOSED"
+
+require include/cms-control.inc
+
+SRC_CMSBCM = "${@bb.utils.contains('USE_CMSBCM', '1', 'file://RTM0AC0000JRCMBCV0SL41C.tar.gz;subdir=cms/bcm', '', d)}"
+SRC_CMSBLC = "${@bb.utils.contains('USE_CMSBLC', '1', 'file://RTM0AC0000JRCMBLC0SL41C.tar.gz;subdir=cms/blc', '', d)}"
+SRC_CMSDGC = "${@bb.utils.contains('USE_CMSDGC', '1', 'file://RTM0AC0000JRCMDGV0SL41C.tar.gz;subdir=cms/dgc', '', d)}"
+
+SRC_URI = " \
+    ${SRC_CMSBCM} \
+    ${SRC_CMSBLC} \
+    ${SRC_CMSDGC} \
+"
+
+S = "${WORKDIR}/cms"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create the lib directory
+    install -d ${D}/${libdir}
+
+    if [ "X${USE_CMSBCM}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/bcm
+        install -m 755 ${S}/bcm/${baselib}/libcmsbcm.so.2.0.0 ${D}/${libdir}
+        install -m 644 ${S}/bcm/include/*.h ${D}/${includedir}/cms/bcm
+
+        cd ${D}/${libdir}
+        ln -s libcmsbcm.so.2.0.0 libcmsbcm.so.1
+        ln -s libcmsbcm.so.1 libcmsbcm.so
+    fi
+
+    if [ "X${USE_CMSBLC}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/blc
+        install -m 755 ${S}/blc/${baselib}/libcmsblc.so.2.0.0 ${D}/${libdir}
+        install -m 644 ${S}/blc/include/*.h ${D}/${includedir}/cms/blc
+
+        cd ${D}/${libdir}
+        ln -s libcmsblc.so.2.0.0 libcmsblc.so.1
+        ln -s libcmsblc.so.1 libcmsblc.so
+    fi
+
+    if [ "X${USE_CMSDGC}" = "X1" ]; then
+        install -d ${D}/${includedir}/cms/dgc
+        install -m 755 ${S}/dgc/${baselib}/libcmsdgc.so.2.0.0 ${D}/${libdir}
+        install -m 644 ${S}/dgc/include/*.h ${D}/${includedir}/cms/dgc
+
+        cd ${D}/${libdir}
+        ln -s libcmsdgc.so.2.0.0 libcmsdgc.so.1
+        ln -s libcmsdgc.so.1 libcmsdgc.so
+    fi
+}
+
+FILES_${PN} = " \
+    ${libdir}/*.so.* \
+    ${libdir}/lib*.so \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir} \
+"
+
+INSANE_SKIP_${PN} = "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb
new file mode 100644
index 00000000..a3553b5c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb
@@ -0,0 +1,74 @@
+DESCRIPTION = "ISDB-T DTV Software Package for Linux for the R-Car Gen3"
+LICENSE = "CLOSED"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+inherit distro_features_check
+
+DEPENDS = " \
+    kernel-module-vspmif mmngr-user-module \
+    vspmif-user-module kernel-module-vspm \
+    omx-user-module kernel-module-uvcs-drv \
+    kernel-module-scu-src kernel-module-ssp \
+    kernel-module-tddmac kernel-module-tsif \
+"
+
+PN = "dtv-user-module"
+PR = "r0"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+REQUIRED_DISTRO_FEATURES = "dtv"
+
+SRC_URI_DTV_SW = "file://Software.tar.gz"
+SRC_URI_DTV_UDF = "file://Reference.tar.gz"
+
+SRC_URI = " \
+    ${SRC_URI_DTV_SW} \
+    ${SRC_URI_DTV_UDF} \
+"
+
+S = "${WORKDIR}"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# do_configure() nothing
+do_configure[noexec] = "1"
+# do_compile() nothing
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}${RENESAS_DATADIR}/include
+    install -d ${D}${RENESAS_DATADIR}/src/dtv/reference
+
+    # Copy library
+    install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}/
+
+    # Copy shared header files
+    install -m 644 ${S}/include/*.h ${D}${RENESAS_DATADIR}/include
+
+    # Copy reference files
+    install -m 644 ${S}/userfunc/*.h ${D}${RENESAS_DATADIR}/src/dtv/reference
+    install -m 644 ${S}/userfunc/*.c ${D}${RENESAS_DATADIR}/src/dtv/reference
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = ""
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-dev = " \
+    ${RENESAS_DATADIR}/include/*.h \
+    ${RENESAS_DATADIR}/src/dtv/reference/* \
+"
+FILES_${PN}-staticdev = " \
+    ${libdir}/*.a \
+"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-encryption-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-encryption-module.bb
new file mode 100644
index 00000000..7fad4010
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-encryption-module.bb
@@ -0,0 +1,53 @@
+DESCRIPTION = "DVD Encryption Library for Linux RCar Gen3"
+LICENSE = "CLOSED"
+
+require include/rcar-gen3-path-common.inc
+
+inherit distro_features_check
+REQUIRED_DISTRO_FEATURES = "dvd_encryption_library"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = " \
+    file://Software.tar.gz \
+"
+
+S = "${WORKDIR}"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    install -d ${D}${base_libdir}/optee_armtz
+    install -d ${D}${RENESAS_DATADIR}/include
+    install -d ${D}${libdir}
+
+    install -m 644 ${S}/TEE/DynamicTA/*.ta \
+                   ${D}${base_libdir}/optee_armtz/
+    install -m 644 ${S}/TEEC/include/avc_copdvd.h \
+                   ${D}${RENESAS_DATADIR}/include/
+    install -m 644 ${S}/TEEC/lib/libcopdvd.a \
+                   ${D}${libdir}
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = " \
+    ${base_libdir}/optee_armtz/*.ta \
+"
+
+FILES_${PN}-dev = " \
+    ${RENESAS_DATADIR}/include/avc_copdvd.h \
+"
+
+FILES_${PN}-staticdev = " \
+    ${libdir}/libcopdvd.a \
+"
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb
new file mode 100644
index 00000000..f3d0b134
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb
@@ -0,0 +1,64 @@
+DESCRIPTION = "DVD Core-Middleware for Linux for the R-Car Gen3"
+LICENSE = "CLOSED"
+
+require include/rcar-gen3-modules-common.inc
+require include/dtv-dvd-control.inc
+
+inherit distro_features_check
+
+DEPENDS = " \
+    kernel-module-vspmif mmngr-user-module \
+    vspmif-user-module kernel-module-vspm \
+    omx-user-module kernel-module-uvcs-drv \
+"
+
+PN = "dvd-user-module"
+PR = "r0"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+REQUIRED_DISTRO_FEATURES = "dvd"
+
+SRC_URI_DVD_SW = "file://Software.tar.gz"
+
+SRC_URI = " \
+    ${SRC_URI_DVD_SW} \
+"
+
+S = "${WORKDIR}"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+# do_configure() nothing
+do_configure[noexec] = "1"
+# do_compile() nothing
+do_compile[noexec] = "1"
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}${RENESAS_DATADIR}/include
+
+    # Copy library
+    install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}
+
+    # Copy shared header files
+    install -m 644 ${S}/include/*.h ${D}${RENESAS_DATADIR}/include
+}
+
+PACKAGES = " \
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-staticdev \
+"
+
+FILES_${PN} = ""
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-dev = " \
+    ${RENESAS_DATADIR}/include/*.h \
+"
+FILES_${PN}-staticdev = " \
+    ${libdir}/*.a \
+"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx/gstomx.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx/gstomx.conf
new file mode 100644
index 00000000..5fca3ee8
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx/gstomx.conf
@@ -0,0 +1,131 @@
+[omxh264dec]
+type-name=GstOMXH264Dec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.H264
+rank=512
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/x-h264,alignment=(string)au,stream-format=(string)byte-stream,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
+
+[omxaaclcdec]
+type-name=GstOMXAACDec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.AUDIO.DECODER.AACLC
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport
+sink-template-caps=audio/mpeg,mpegversion=(int){2,4},stream-format=(string){raw,adts},rate=(int)[8000,96000],channels=(int)[1,2],framed=(boolean)true
+src-template-caps=audio/x-raw,rate=(int)[8000,96000],channels=(int)[1,2],format=(string)S16LE
+
+[omxmpeg4videodec]
+type-name=GstOMXMPEG4VideoDec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.MPEG4
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/mpeg,mpegversion=(int)4,systemstream=(boolean)false,parsed=(boolean)true,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
+
+[omxvc1dec]
+type-name=GstOMXWMVDec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.VC1
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/x-wmv,wmvversion=(int)3,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
+
+[omxh265dec]
+type-name=GstOMXH265Dec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.H265
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/x-h265,alignment=(string)au,stream-format=(string)byte-stream,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
+
+[omxaacdec]
+type-name=GstOMXAACDec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.AUDIO.DECODER.AAC
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport
+sink-template-caps=audio/mpeg,mpegversion=(int){2,4},stream-format=(string){raw,adts},rate=(int)[8000,48000],channels=(int)[1,6],framed=(boolean)true
+src-template-caps=audio/x-raw,rate=(int)[8000,48000],channels=(int){1,2,6},format=(string)S16LE
+
+[omxmp3dec]
+type-name=GstOMXMP3Dec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.AUDIO.DECODER.MP3
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport
+sink-template-caps=audio/mpeg,mpegversion=(int)1,layer=(int)[1,3],mpegaudioversion=(int)[1,3],rate=(int)[8000,48000],channels=(int)[1,2],parsed=(boolean) true
+src-template-caps=audio/x-raw,rate=(int)[8000,48000],channels=(int){1,2},format=(string)S16LE
+
+[omxwmadec]
+type-name=GstOMXWMADec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.AUDIO.DECODER.WMA
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;skip-handle-codec-data
+sink-template-caps=audio/x-wma,wmaversion=(int)2,rate=(int)[8000,48000],channels=(int){1,2},block_align=(int)[0,2147483647],bitrate=(int)[0,2147483647]
+src-template-caps=audio/x-raw,rate=(int)[8000,48000],channels=(int){1,2},format=(string)S16LE
+
+[omxh264enc]
+type-name=GstOMXH264Enc
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.ENCODER.H264
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;renesas-encmc-stride-align
+sink-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[80,3840],height=(int)[80,2160]
+src-template-caps=video/x-h264,stream-format=(string)byte-stream,width=(int)[80,3840],height=(int)[80,2160]
+
+[omxvp8dec]
+type-name=GstOMXVP8Dec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.VP8
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/x-vp8,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
+
+[omxvp8enc]
+type-name=GstOMXVP8Enc
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.ENCODER.VP8
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;renesas-encmc-stride-align
+sink-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[80,1920],height=(int)[80,1080]
+src-template-caps=video/x-vp8,width=(int)[80,1920],height=(int)[80,1080]
+
+[omxvp9dec]
+type-name=GstOMXVP9Dec
+core-name=@RENESAS_DATADIR@/lib/libomxr_core.so
+component-name=OMX.RENESAS.VIDEO.DECODER.VP9
+rank=256
+in-port-index=0
+out-port-index=1
+hacks=no-disable-outport;default-pix-aspect-ratio;no-component-reconfigure
+sink-template-caps=video/x-vp9,width=(int)[1, MAX],height=(int)[1, MAX]
+src-template-caps=video/x-raw,format=(string){NV12,I420},width=(int)[1, MAX],height=(int)[1, MAX]
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.14.4.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.14.4.bbappend
new file mode 100644
index 00000000..81515f9d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.14.4.bbappend
@@ -0,0 +1,38 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/:"
+
+SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-omx/gst-omx-${PV}.tar.xz"
+SRC_URI_append = " \
+    git://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.14.4 \
+    file://gstomx.conf \
+"
+
+require include/rcar-gen3-path-common.inc
+
+DEPENDS += "omx-user-module mmngrbuf-user-module"
+
+SRCREV = "2542e931c13b6f3e0dfa97d7b6230ca584ca11bc"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c \
+    file://omx/gstomx.h;beginline=1;endline=22;md5=e2c6664eda77dc22095adbed9cb6c6e4 \
+"
+
+S = "${WORKDIR}/git"
+
+GSTREAMER_1_0_OMX_TARGET = "rcar"
+GSTREAMER_1_0_OMX_CORE_NAME = "${libdir}/libomxr_core.so"
+EXTRA_OECONF_append = " --enable-experimental"
+
+do_configure_prepend() {
+    export http_proxy=${http_proxy}
+    export https_proxy=${https_proxy}
+    export HTTP_PROXY=${HTTP_PROXY}
+    export HTTPS_PROXY=${HTTPS_PROXY}
+    cd ${S}
+    install -m 0644 ${WORKDIR}/gstomx.conf ${S}/config/rcar/
+    sed -i 's,@RENESAS_DATADIR@,${RENESAS_DATADIR},g' ${S}/config/rcar/gstomx.conf
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
+
+RDEPENDS_${PN}_append = " omx-user-module"
+RDEPENDS_${PN}_remove = "libomxil"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-ebisu_r8a77990.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-ebisu_r8a77990.conf
new file mode 100644
index 00000000..25a3fa1e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-ebisu_r8a77990.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video8
+output-device-name=/dev/video9
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf
new file mode 100644
index 00000000..4807dc3d
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video12
+output-device-name=/dev/video13
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3nulcb_r8a77965.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3nulcb_r8a77965.conf
new file mode 100644
index 00000000..890c5ad9
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3nulcb_r8a77965.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video6
+output-device-name=/dev/video7
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf
new file mode 100644
index 00000000..890c5ad9
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video6
+output-device-name=/dev/video7
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf
new file mode 100644
index 00000000..586b13b0
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video20
+output-device-name=/dev/video21
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf
new file mode 100644
index 00000000..74a8ab9b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video14
+output-device-name=/dev/video15
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a77965.conf b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a77965.conf
new file mode 100644
index 00000000..74a8ab9b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a77965.conf
@@ -0,0 +1,2 @@
+input-device-name=/dev/video14
+output-device-name=/dev/video15
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.1.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.1.bb
new file mode 100644
index 00000000..631487cd
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.1.bb
@@ -0,0 +1,52 @@
+SUMMARY = "GStreamer VSP filter plugin"
+SECTION = "multimedia"
+LICENSE = "GPLv2+"
+DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base pkgconfig"
+LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=4fbd65380cdd255951079008b364516c"
+inherit autotools pkgconfig
+
+PN = "gstreamer1.0-plugin-vspfilter"
+
+EXTRA_AUTORECONF_append = " -I ${STAGING_DATADIR}/aclocal"
+
+VSPFILTER_CONF_r8a7795 = "gstvspfilter-${MACHINE}_r8a7795.conf"
+VSPFILTER_CONF_r8a7796 = "gstvspfilter-${MACHINE}_r8a7796.conf"
+VSPFILTER_CONF_r8a77965 = "gstvspfilter-${MACHINE}_r8a77965.conf"
+VSPFILTER_CONF_r8a77990 = "gstvspfilter-${MACHINE}_r8a77990.conf"
+
+SRC_URI = " \
+    git://github.com/renesas-rcar/gst-plugin-vspfilter.git;branch=RCAR-GEN3/1.0.1 \
+    file://${VSPFILTER_CONF} \
+"
+
+SRCREV = "53061d6710619851e2d85576a5142eb5f3fa0c84"
+
+S = "${WORKDIR}/git"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    export http_proxy=${http_proxy}
+    export https_proxy=${https_proxy}
+    export HTTP_PROXY=${HTTP_PROXY}
+    export HTTPS_PROXY=${HTTPS_PROXY}
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+FILES_${PN} = " \
+    ${libdir}/gstreamer-1.0/libgstvspfilter.so \
+    ${sysconfdir}/gstvspfilter.conf"
+FILES_${PN}-dev = "${libdir}/gstreamer-1.0/libgstvspfilter.la"
+FILES_${PN}-staticdev = "${libdir}/gstreamer-1.0/libgstvspfilter.a"
+FILES_${PN}-dbg = " \
+    ${libdir}/gstreamer-1.0/.debug \
+    ${prefix}/src"
+
+do_install_append() {
+    install -Dm 644 ${WORKDIR}/${VSPFILTER_CONF} ${D}/etc/gstvspfilter.conf
+}
+
+RDEPENDS_${PN} = "kernel-module-vsp2driver"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.14.4.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.14.4.bbappend
new file mode 100644
index 00000000..8a5d5862
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.14.4.bbappend
@@ -0,0 +1,27 @@
+SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-${PV}.tar.xz"
+SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.14.4"
+
+SRCREV = "34917c1788f037d884501074517337087de701f0"
+
+DEPENDS += "weston"
+
+S = "${WORKDIR}/git"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    export http_proxy=${http_proxy}
+    export https_proxy=${https_proxy}
+    export HTTP_PROXY=${HTTP_PROXY}
+    export HTTPS_PROXY=${HTTPS_PROXY}
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+do_configure_prepend() {
+    cd ${S}
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.14.4.bbappend b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.14.4.bbappend
new file mode 100644
index 00000000..98268b33
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.14.4.bbappend
@@ -0,0 +1,32 @@
+SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-${PV}.tar.xz"
+SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.14.4"
+
+SRCREV = "11b76b496300a62c984f3dff5f4dfd772b16b9c0"
+
+DEPENDS += "mmngrbuf-user-module"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OECONF_append = " \
+    --enable-cont-frame-capture \
+    --enable-ignore-fps-of-video-standard \
+"
+
+# submodule is extracted before do_populate_lic
+addtask do_init_submodule after do_unpack before do_patch
+
+do_init_submodule() {
+    export http_proxy=${http_proxy}
+    export https_proxy=${https_proxy}
+    export HTTP_PROXY=${HTTP_PROXY}
+    export HTTPS_PROXY=${HTTPS_PROXY}
+    cd ${S}
+    git submodule init
+    git submodule update
+}
+
+do_configure_prepend() {
+    cd ${S}
+    ./autogen.sh --noconfigure
+    cd ${B}
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb
new file mode 100644
index 00000000..ac4cf30b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb
@@ -0,0 +1,25 @@
+DESCRIPTION = "Memory Manager User module for Renesas R-Car Gen3"
+require mmngr_lib.inc
+require include/rcar-gen3-path-common.inc
+
+DEPENDS = "kernel-module-mmngr"
+PN = "mmngr-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git/libmmngr/mmngr"
+
+EXTRA_OECONF =  "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \
+    " --enable-mmngr-test", "", d)}"
+
+exec_prefix = "/usr"
+bindir = "${RENESAS_DATADIR}/bin"
+includedir = "${RENESAS_DATADIR}/include"
+CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include"
+
+do_install_append() {
+    if [ -f ${D}${RENESAS_DATADIR}/bin/mmtp ]; then
+        if [ X${WS} = "X32" ]; then
+            mv ${D}${RENESAS_DATADIR}/bin/mmtp ${D}${RENESAS_DATADIR}/bin/mmtp${WS}
+        fi
+    fi
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc
new file mode 100644
index 00000000..5def237b
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc
@@ -0,0 +1,18 @@
+# Common path of MMNGR and MMNGRBUF module
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "\
+    file://${WORKDIR}/git/COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a"
+
+MMNGR_LIB_URI = "git://github.com/renesas-rcar/mmngr_lib.git"
+
+SRC_URI = "${MMNGR_LIB_URI};branch=rcar_gen3"
+SRCREV = "e55a8356c906486ee0be78b2a1fde227e7a578f4"
+
+# Get Wordsize of test app and change their names later to avoid override
+WS_aarch64 = ""
+WS_virtclass-multilib-lib32 = "32"
+
+# These modules are machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit autotools
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb
new file mode 100644
index 00000000..690169fd
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb
@@ -0,0 +1,25 @@
+DESCRIPTION = "Memory Manager Buffer User module for Renesas R-Car Gen3"
+require mmngr_lib.inc
+require include/rcar-gen3-path-common.inc
+
+DEPENDS = "kernel-module-mmngrbuf"
+PN = "mmngrbuf-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git/libmmngr/mmngrbuf"
+
+EXTRA_OECONF =  "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \
+    " --enable-mmngrbuf-test", "", d)}"
+
+exec_prefix = "/usr"
+bindir = "${RENESAS_DATADIR}/bin"
+includedir = "${RENESAS_DATADIR}/include"
+CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include"
+
+do_install_append() {
+    if [ -f ${D}${RENESAS_DATADIR}/bin/mmbuftp ]; then
+        if [ X${WS} = "X32" ]; then
+            mv ${D}${RENESAS_DATADIR}/bin/mmbuftp ${D}${RENESAS_DATADIR}/bin/mmbuftp${WS}
+        fi
+    fi
+}
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc
new file mode 100644
index 00000000..6f3f8474
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc
@@ -0,0 +1,2 @@
+deltask do_configure
+deltask do_compile
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb
new file mode 100644
index 00000000..f31792bf
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb
@@ -0,0 +1,61 @@
+DESCRIPTION = "ALAC decoder library"
+SECTION = "libs"
+LICENSE = "Apache-2.0 & APSL-2.0"
+LIC_FILES_CHKSUM = " \
+    file://LICENSE;md5=5cf67868b9e038eccb149ec80809d9f5 \
+    file://APPLE_LICENSE.txt;md5=b180a94f894d2a868d40ea43da2bbaba \
+"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+DEPENDS = " \
+    kernel-module-mmngr mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif \
+    kernel-module-vspm kernel-module-vsp2driver \
+"
+
+RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module"
+
+SRC_URI = "git://github.com/renesas-rcar/alac_decoder.git;branch=master"
+SRCREV = "5d7e5c91a932bedb36284591612bfbb3342cd672"
+
+S = "${WORKDIR}/git"
+B = "${S}/build/linux_armyocto/lib"
+
+EXTRA_OEMAKE = "ARCH=${ARCH}"
+
+ARCH = "arm"
+ARCH_aarch64 = "arm64"
+
+do_install() {
+    # Create directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 755 ${S}/build/linux_armyocto/libALACDLA_L.so.2.0 ${D}/${libdir}/
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -s libALACDLA_L.so.2.0 libALACDLA_L.so.2
+    ln -s libALACDLA_L.so.2 libALACDLA_L.so
+
+    # Install shared header file
+    install -m 644 ${S}/lib/alacd_Lib.h ${D}/${includedir}/
+}
+
+FILES_${PN} += " \
+    ${libdir}/libALACDLA_L.so.* \
+    ${libdir}/libALACDLA_L.so \
+"
+
+FILES_${PN}-dev = "${includedir}/*.h"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb
new file mode 100644
index 00000000..453195e1
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb
@@ -0,0 +1,50 @@
+DESCRIPTION = "FLAC decoder library"
+SECTION = "libs"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING.Xiph;md5=a2c4b71c0198682376d483eb5bcc9197"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = "git://github.com/renesas-rcar/flac_decoder.git;branch=master"
+SRCREV = "70c0a7ae7dc8cac2056adf5eb175e3c54f892c27"
+
+S = "${WORKDIR}/git"
+B = "${S}/build/linux_armyocto/lib"
+
+EXTRA_OEMAKE = "ARCH=${ARCH}"
+
+ARCH = "arm"
+ARCH_aarch64 = "arm64"
+
+do_install() {
+    # Create directories
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Install library
+    install -m 755 ${S}/build/linux_armyocto/libFLACDLA_L.so.2.0 ${D}/${libdir}/
+
+    # Create symbolic link
+    cd ${D}/${libdir}
+    ln -s libFLACDLA_L.so.2.0 libFLACDLA_L.so.2
+    ln -s libFLACDLA_L.so.2 libFLACDLA_L.so
+
+    # Install shared header file
+    install -m 644 ${S}/lib/flacd_Lib.h ${D}/${includedir}/
+}
+
+FILES_${PN} += " \
+    ${libdir}/libFLACDLA_L.so.* \
+    ${libdir}/libFLACDLA_L.so \
+"
+
+FILES_${PN}-dev = "${includedir}/*.h"
+
+INSANE_SKIP_${PN} += "dev-so"
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb
new file mode 100644
index 00000000..7be578fe
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb
@@ -0,0 +1,489 @@
+DESCRIPTION = "OMX Media Components R-Car Gen3"
+LICENSE = "CLOSED"
+require include/omx-control.inc
+require include/rcar-gen3-modules-common.inc
+
+DEPENDS = " \
+    kernel-module-mmngr mmngr-user-module \
+    vspmif-user-module kernel-module-vspmif \
+    kernel-module-vspm kernel-module-vsp2driver \
+"
+
+# Task Control. Compile is not performed when not installing OMX Video and Audio Libs.
+# Note) dummy-omx-user-module.inc does not exist.
+INCLUDE_FILE = '${@oe.utils.conditional("USE_OMX_COMMON", "1", "dummy", "deltask", d )}'
+include ${INCLUDE_FILE}-omx-user-module.inc
+
+DEPENDS += '${@oe.utils.conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}'
+
+inherit autotools
+require include/checksum_control.inc
+
+includedir = "${RENESAS_DATADIR}/include"
+CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+OMX_EVA_PREFIX = '${@oe.utils.conditional("USE_OMX_EVA_PKG", "1", "EVA", "", d )}'
+
+# SRC file name
+SRC_URI_OMX = '${@oe.utils.conditional("USE_OMX_COMMON", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL41C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_VCMND = '${@oe.utils.conditional("USE_VIDEO_DEC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL41C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_VCMNE = '${@oe.utils.conditional("USE_VIDEO_ENC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL41C.tar.bz2;unpack=0", "", d )}'
+SRC_URI_H264D = '${@oe.utils.conditional("USE_H264D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL41C.tar.bz2", "", d )}'
+SRC_URI_H264E = '${@oe.utils.conditional("USE_H264E_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL41C.tar.bz2", "", d )}'
+
+SRC_URI_H263D = '${@oe.utils.conditional("USE_H263D_OMX", "1", "file://RTM0AC0000XV263D30SL41C.tar.bz2", "", d )}'
+SRC_URI_H265D = '${@oe.utils.conditional("USE_H265D_OMX", "1", "file://RTM0AC0000XV265D30SL41C.tar.bz2", "", d )}'
+SRC_URI_MPEG2D = '${@oe.utils.conditional("USE_MPEG2D_OMX", "1", "file://RTM0AC0000XVM2VD30SL41C.tar.bz2", "", d )}'
+SRC_URI_MPEG4D = '${@oe.utils.conditional("USE_MPEG4D_OMX", "1", "file://RTM0AC0000XVM4VD30SL41C.tar.bz2", "", d )}'
+SRC_URI_VC1D = '${@oe.utils.conditional("USE_VC1D_OMX", "1", "file://RTM0AC0000XVVC1D30SL41C.tar.bz2", "", d )}'
+SRC_URI_DIVXD = '${@oe.utils.conditional("USE_DIVXD_OMX", "1", "file://RTM0AC0000XVDVXD30SL41C.tar.bz2", "", d )}'
+SRC_URI_RVD = '${@oe.utils.conditional("USE_RVD_OMX", "1", "file://RTM0AC0000XVRLVD30SL41C.tar.bz2", "", d )}'
+SRC_URI_VP8D = '${@oe.utils.conditional("USE_VP8D_OMX", "1", "file://RTM0AC0000XVVP8D30SL41C.tar.bz2", "", d )}'
+SRC_URI_VP8E = '${@oe.utils.conditional("USE_VP8E_OMX", "1", "file://RTM0AC0000XVVP8E30SL41C.tar.bz2", "", d )}'
+SRC_URI_VP9D = '${@oe.utils.conditional("USE_VP9D_OMX", "1", "file://RTM0AC0000XVVP9D30SL41C.tar.bz2", "", d )}'
+SRC_URI_ACMND = '${@oe.utils.conditional("USE_AUDIO_OMX", "1", "file://RTM0AC0000XACMND30SL41C.tar.gz", "", d )}'
+SRC_URI_AACLC = '${@oe.utils.conditional("USE_AACLCD_OMX", "1", "file://RTM0AC0000XAAACD30SL41C.tar.gz", "", d )}'
+SRC_URI_AACPV2 = '${@oe.utils.conditional("USE_AACPV2D_OMX", "1", "file://RTM0AC0000XAAAPD30SL41C.tar.gz", "", d )}'
+SRC_URI_MP3 = '${@oe.utils.conditional("USE_MP3D_OMX", "1", "file://RTM0AC0000XAMP3D30SL41C.tar.gz", "", d )}'
+SRC_URI_AACLCE = '${@oe.utils.conditional("USE_AACLCE_OMX", "1", "file://RTM0AC0000XAAACE30SL41C.tar.gz", "", d )}'
+SRC_URI_WMA = '${@oe.utils.conditional("USE_WMAD_OMX", "1", "file://RTM0AC0000XAWMAD30SL41C.tar.gz", "", d )}'
+SRC_URI_ALACD = '${@oe.utils.conditional("USE_ALACD_OMX", "1", "file://RTM0AC0000XAALAD30SL41C.tar.gz", "", d )}'
+SRC_URI_FLACD = '${@oe.utils.conditional("USE_FLACD_OMX", "1", "file://RTM0AC0000XAFLAD30SL41C.tar.gz", "", d )}'
+SRC_URI_DDD = '${@oe.utils.conditional("USE_DDD_OMX", "1", "file://RTM0AC0000XADD5D30SL41C.tar.gz", "", d )}'
+SRC_URI_AACMZ = '${@oe.utils.conditional("USE_AACLC_MDW", "1", "file://RTM0AC0000ADAACMZ1SL41C.tar.gz", "", d )}'
+SRC_URI_AACPV2MZ = '${@oe.utils.conditional("USE_AACPV2_MDW", "1", "file://RTM0AC0000ADAAPMZ1SL41C.tar.gz", "", d )}'
+SRC_URI_MP3MZ = '${@oe.utils.conditional("USE_MP3_MDW", "1", "file://RTM0AC0000ADMP3MZ1SL41C.tar.gz", "", d )}'
+SRC_URI_WMAMZ = '${@oe.utils.conditional("USE_WMA_MDW", "1", "file://RTM0AC0000ADWMAMZ1SL41C.tar.gz", "", d )}'
+SRC_URI_DDMZ = '${@oe.utils.conditional("USE_DD_MDW", "1", "file://RTM0AC0000ADDD5MZ1SL41C.tar.gz", "", d )}'
+SRC_URI_AEAACMZ = '${@oe.utils.conditional("USE_AACLCE_MDW", "1", "file://RTM0AC0000AEAACMZ1SL41C.tar.gz", "", d )}'
+
+SRC_URI = " \
+    ${SRC_URI_OMX} \
+    ${SRC_URI_VCMND} \
+    ${SRC_URI_VCMNE} \
+    ${SRC_URI_H263D} \
+    ${SRC_URI_H264D} \
+    ${SRC_URI_H264E} \
+    ${SRC_URI_H265D} \
+    ${SRC_URI_MPEG2D} \
+    ${SRC_URI_MPEG4D} \
+    ${SRC_URI_VC1D} \
+    ${SRC_URI_DIVXD} \
+    ${SRC_URI_RVD} \
+    ${SRC_URI_ACMND} \
+    ${SRC_URI_AACLC} \
+    ${SRC_URI_AACPV2} \
+    ${SRC_URI_MP3} \
+    ${SRC_URI_WMA} \
+    ${SRC_URI_ALACD} \
+    ${SRC_URI_FLACD} \
+    ${SRC_URI_DDD} \
+    ${SRC_URI_AACLCE} \
+    ${SRC_URI_AACMZ} \
+    ${SRC_URI_AACPV2MZ} \
+    ${SRC_URI_MP3MZ} \
+    ${SRC_URI_WMAMZ} \
+    ${SRC_URI_DDMZ} \
+    ${SRC_URI_AEAACMZ} \
+    ${SRC_URI_VP8D} \
+    ${SRC_URI_VP8E} \
+    ${SRC_URI_VP9D} \
+"
+
+# SRC directory name
+OMX_COMMON_SRC = '${@oe.utils.conditional("USE_OMX_COMMON", "1", "${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL41C", "", d )}'
+OMX_VIDEO_DEC_COMMON_SRC = '${@oe.utils.conditional("USE_VIDEO_DEC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL41C", "", d )}'
+OMX_VIDEO_ENC_COMMON_SRC = '${@oe.utils.conditional("USE_VIDEO_ENC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL41C", "", d )}'
+
+OMX_H264_DEC_SRC = '${@oe.utils.conditional("USE_H264D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL41C", "", d )}'
+OMX_H264_ENC_SRC = '${@oe.utils.conditional("USE_H264E_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL41C", "", d )}'
+
+OMX_H263_DEC_SRC = '${@oe.utils.conditional("USE_H263D_OMX", "1", "RTM0AC0000XV263D30SL41C", "", d )}'
+OMX_H265_DEC_SRC = '${@oe.utils.conditional("USE_H265D_OMX", "1", "RTM0AC0000XV265D30SL41C", "", d )}'
+OMX_MPEG2_DEC_SRC = '${@oe.utils.conditional("USE_MPEG2D_OMX", "1", "RTM0AC0000XVM2VD30SL41C", "", d )}'
+OMX_MPEG4_DEC_SRC = '${@oe.utils.conditional("USE_MPEG4D_OMX", "1", "RTM0AC0000XVM4VD30SL41C", "", d )}'
+OMX_VC1_DEC_SRC = '${@oe.utils.conditional("USE_VC1D_OMX", "1", "RTM0AC0000XVVC1D30SL41C", "", d )}'
+OMX_DIVX_DEC_SRC = '${@oe.utils.conditional("USE_DIVXD_OMX", "1", "RTM0AC0000XVDVXD30SL41C", "", d )}'
+OMX_RV_DEC_SRC = '${@oe.utils.conditional("USE_RVD_OMX", "1", "RTM0AC0000XVRLVD30SL41C", "", d )}'
+OMX_VP8_DEC_SRC = '${@oe.utils.conditional("USE_VP8D_OMX", "1", "RTM0AC0000XVVP8D30SL41C", "", d )}'
+OMX_VP8_ENC_SRC = '${@oe.utils.conditional("USE_VP8E_OMX", "1", "RTM0AC0000XVVP8E30SL41C", "", d )}'
+OMX_VP9_DEC_SRC = '${@oe.utils.conditional("USE_VP9D_OMX", "1", "RTM0AC0000XVVP9D30SL41C", "", d )}'
+
+OMX_VIDEO_SRC_LIST = " \
+    ${OMX_COMMON_SRC} \
+    ${OMX_VIDEO_DEC_COMMON_SRC} \
+    ${OMX_VIDEO_ENC_COMMON_SRC} \
+    ${OMX_H263_DEC_SRC} \
+    ${OMX_H264_DEC_SRC} \
+    ${OMX_H264_ENC_SRC} \
+    ${OMX_H265_DEC_SRC} \
+    ${OMX_MPEG2_DEC_SRC} \
+    ${OMX_MPEG4_DEC_SRC} \
+    ${OMX_VC1_DEC_SRC} \
+    ${OMX_DIVX_DEC_SRC} \
+    ${OMX_RV_DEC_SRC} \
+    ${OMX_VP8_DEC_SRC} \
+    ${OMX_VP8_ENC_SRC} \
+    ${OMX_VP9_DEC_SRC} \
+"
+
+AAC_MIDDLEWARE_SRC = "RTM0AC0000ADAACMZ1SL41C"
+AACPV2_MIDDLEWARE_SRC = "RTM0AC0000ADAAPMZ1SL41C"
+MP3_MIDDLEWARE_SRC = "RTM0AC0000ADMP3MZ1SL41C"
+WMA_MIDDLEWARE_SRC = "RTM0AC0000ADWMAMZ1SL41C"
+DD_MIDDLEWARE_SRC = "RTM0AC0000ADDD5MZ1SL41C"
+AEAAC_MIDDLEWARE_SRC = "RTM0AC0000AEAACMZ1SL41C"
+
+OMX_AUDIO_COMMON_SRC = '${@oe.utils.conditional("USE_AUDIO_OMX", "1", "RTM0AC0000XACMND30SL41C", "", d )}'
+OMX_AACLC_DEC_SRC = '${@oe.utils.conditional("USE_AACLCD_OMX", "1", "RTM0AC0000XAAACD30SL41C", "", d )}'
+OMX_AACPV2_DEC_SRC = '${@oe.utils.conditional("USE_AACPV2D_OMX", "1", "RTM0AC0000XAAAPD30SL41C", "", d )}'
+OMX_MP3_DEC_SRC = '${@oe.utils.conditional("USE_MP3D_OMX", "1", "RTM0AC0000XAMP3D30SL41C", "", d )}'
+OMX_WMA_DEC_SRC = '${@oe.utils.conditional("USE_WMAD_OMX", "1", "RTM0AC0000XAWMAD30SL41C", "", d )}'
+OMX_ALAC_DEC_SRC = '${@oe.utils.conditional("USE_ALACD_OMX", "1", "RTM0AC0000XAALAD30SL41C", "", d )}'
+OMX_FLAC_DEC_SRC = '${@oe.utils.conditional("USE_FLACD_OMX", "1", "RTM0AC0000XAFLAD30SL41C", "", d )}'
+OMX_DD_DEC_SRC = '${@oe.utils.conditional("USE_DDD_OMX", "1", "RTM0AC0000XADD5D30SL41C", "", d )}'
+OMX_AACLC_ENC_SRC = '${@oe.utils.conditional("USE_AACLCE_OMX", "1", "RTM0AC0000XAAACE30SL41C", "", d )}'
+
+OMX_AUDIO_SRC_LIST = " \
+    ${OMX_AUDIO_COMMON_SRC} \
+    ${OMX_AACLC_DEC_SRC} \
+    ${OMX_AACPV2_DEC_SRC} \
+    ${OMX_MP3_DEC_SRC} \
+    ${OMX_WMA_DEC_SRC} \
+    ${OMX_ALAC_DEC_SRC} \
+    ${OMX_FLAC_DEC_SRC} \
+    ${OMX_DD_DEC_SRC} \
+    ${OMX_AACLC_ENC_SRC} \
+"
+
+S = "${WORKDIR}/omx/"
+
+# Create ${S} directory
+do_unpack_prepend() {
+    os.system("install -d ${S}")
+}
+
+do_unpack_append() {
+    bb.build.exec_func('setup_build_tree', d)
+}
+
+setup_build_tree() {
+    for omxmc in ${OMX_COMMON_SRC} ${OMX_VIDEO_DEC_COMMON_SRC} ${OMX_VIDEO_ENC_COMMON_SRC}
+    do
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${WORKDIR}
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${S} ${omxmc}/src --strip=2
+        tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${S} ${omxmc}/include --strip=1
+    done
+}
+
+B = "${S}"
+
+EXTRA_OECONF = "OMXR_DEFAULT_CONFIG_FILE_NAME=${sysconfdir}/omxr/omxr_config_base.txt"
+
+do_configure() {
+    export uvcsdrv_dir="${INCSHARED}"
+    chmod u+x autogen.sh
+    ./autogen.sh
+    oe_runconf
+}
+
+do_install_omx_video() {
+    cd ${D}/${libdir}
+    for omxmc in ${OMX_VIDEO_SRC_LIST}
+    do
+        src="${WORKDIR}/${omxmc}"
+        install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir}
+        install -m 644 ${src}/include/*.h ${D}/${includedir}
+        install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr
+    done
+
+    if [ "X${USE_OMX_COMMON}" = "X1" ] ; then
+        ln -s libomxr_core.so.3.0.0 libomxr_core.so.3
+        ln -s libomxr_core.so.3 libomxr_core.so
+
+        ln -s libomxr_mc_cmn.so.3.0.0 libomxr_mc_cmn.so.3
+        ln -s libomxr_mc_cmn.so.3 libomxr_mc_cmn.so
+    fi
+
+    if [ "X${USE_VIDEO_OMX}" = "X1" ] ; then
+        ln -s libomxr_mc_vcmn.so.3.0.0 libomxr_mc_vcmn.so.3
+        ln -s libomxr_mc_vcmn.so.3 libomxr_mc_vcmn.so
+    fi
+
+    if [ "X${USE_VIDEO_DEC}" = "X1" ] ; then
+        ln -s libomxr_mc_vdcmn.so.3.0.0 libomxr_mc_vdcmn.so.3
+        ln -s libomxr_mc_vdcmn.so.3 libomxr_mc_vdcmn.so
+
+        ln -s libuvcs_dec.so.3.0.0 libuvcs_dec.so.3
+        ln -s libuvcs_dec.so.3 libuvcs_dec.so
+    fi
+
+    if [ "X${USE_VIDEO_ENC}" = "X1" ] ; then
+        ln -s libomxr_mc_vecmn.so.3.0.0 libomxr_mc_vecmn.so.3
+        ln -s libomxr_mc_vecmn.so.3 libomxr_mc_vecmn.so
+
+        ln -s libuvcs_enc.so.3.0.0 libuvcs_enc.so.3
+        ln -s libuvcs_enc.so.3 libuvcs_enc.so
+    fi
+
+    if [ "X${USE_H263D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h263d.so.3.0.0 libomxr_mc_h263d.so.3
+        ln -s libomxr_mc_h263d.so.3 libomxr_mc_h263d.so
+
+        ln -s libuvcs_hv3d.so.3.0.0 libuvcs_hv3d.so.3
+        ln -s libuvcs_hv3d.so.3 libuvcs_hv3d.so
+    fi
+
+    if [ "X${USE_H264D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h264d.so.3.0.0 libomxr_mc_h264d.so.3
+        ln -s libomxr_mc_h264d.so.3 libomxr_mc_h264d.so
+
+        ln -s libuvcs_avcd.so.3.0.0 libuvcs_avcd.so.3
+        ln -s libuvcs_avcd.so.3 libuvcs_avcd.so
+    fi
+
+    if [ "X${USE_H264E_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_h264e.so.3.0.0 libomxr_mc_h264e.so.3
+        ln -s libomxr_mc_h264e.so.3 libomxr_mc_h264e.so
+
+        ln -s libuvcs_avce.so.3.0.0 libuvcs_avce.so.3
+        ln -s libuvcs_avce.so.3 libuvcs_avce.so
+    fi
+
+    if [ "X${USE_H265D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_hevd.so.3.0.0 libomxr_mc_hevd.so.3
+        ln -s libomxr_mc_hevd.so.3 libomxr_mc_hevd.so
+
+        ln -s libuvcs_hevd.so.3.0.0 libuvcs_hevd.so.3
+        ln -s libuvcs_hevd.so.3 libuvcs_hevd.so
+    fi
+
+    if [ "X${USE_MPEG2D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_m2vd.so.3.0.0 libomxr_mc_m2vd.so.3
+        ln -s libomxr_mc_m2vd.so.3 libomxr_mc_m2vd.so
+
+        ln -s libuvcs_m2vd.so.3.0.0 libuvcs_m2vd.so.3
+        ln -s libuvcs_m2vd.so.3 libuvcs_m2vd.so
+    fi
+
+    if [ "X${USE_MPEG4D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_m4vd.so.3.0.0 libomxr_mc_m4vd.so.3
+        ln -s libomxr_mc_m4vd.so.3 libomxr_mc_m4vd.so
+
+        ln -s libuvcs_m4vd.so.3.0.0 libuvcs_m4vd.so.3
+        ln -s libuvcs_m4vd.so.3 libuvcs_m4vd.so
+    fi
+
+    if [ "X${USE_VC1D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_vc1d.so.3.0.0 libomxr_mc_vc1d.so.3
+        ln -s libomxr_mc_vc1d.so.3 libomxr_mc_vc1d.so
+
+        ln -s libuvcs_vc1d.so.3.0.0 libuvcs_vc1d.so.3
+        ln -s libuvcs_vc1d.so.3 libuvcs_vc1d.so
+    fi
+
+    if [ "X${USE_DIVXD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_divxd.so.3.0.0 libomxr_mc_divxd.so.3
+        ln -s libomxr_mc_divxd.so.3 libomxr_mc_divxd.so
+
+        ln -s libuvcs_dvxd.so.3.0.0 libuvcs_dvxd.so.3
+        ln -s libuvcs_dvxd.so.3 libuvcs_dvxd.so
+    fi
+
+    if [ "X${USE_RVD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_rlvd.so.3.0.0 libomxr_mc_rlvd.so.3
+        ln -s libomxr_mc_rlvd.so.3 libomxr_mc_rlvd.so
+
+        ln -s libuvcs_rlvd.so.3.0.0 libuvcs_rlvd.so.3
+        ln -s libuvcs_rlvd.so.3 libuvcs_rlvd.so
+    fi
+
+    if [ "X${USE_VP8D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_vp8d.so.3.0.0 libomxr_mc_vp8d.so.3
+        ln -s libomxr_mc_vp8d.so.3 libomxr_mc_vp8d.so
+
+        ln -s libuvcs_vp8d.so.3.0.0 libuvcs_vp8d.so.3
+        ln -s libuvcs_vp8d.so.3 libuvcs_vp8d.so
+    fi
+
+    if [ "X${USE_VP8E_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_vp8e.so.3.0.0 libomxr_mc_vp8e.so.3
+        ln -s libomxr_mc_vp8e.so.3 libomxr_mc_vp8e.so
+
+        ln -s libuvcs_vp8e.so.3.0.0 libuvcs_vp8e.so.3
+        ln -s libuvcs_vp8e.so.3 libuvcs_vp8e.so
+    fi
+
+    if [ "X${USE_VP9D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_vp9d.so.3.0.0 libomxr_mc_vp9d.so.3
+        ln -s libomxr_mc_vp9d.so.3 libomxr_mc_vp9d.so
+
+        ln -s libuvcs_vp9d.so.3.0.0 libuvcs_vp9d.so.3
+        ln -s libuvcs_vp9d.so.3 libuvcs_vp9d.so
+    fi
+}
+
+do_install_audio_middleware() {
+    cd ${D}/${libdir}
+
+    if [ "X${USE_AACLC_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/${baselib}/libAACDLA_L.so.3.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libAACDLA_L.so.3.0 libAACDLA_L.so.3
+        ln -s libAACDLA_L.so.3 libAACDLA_L.so
+    fi
+
+    if [ "X${USE_AACPV2_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/${baselib}/libRSACPDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSACPDLA_L.so.2.0 libRSACPDLA_L.so.2
+        ln -s libRSACPDLA_L.so.2 libRSACPDLA_L.so
+    fi
+
+    if [ "X${USE_MP3_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/${baselib}/libMP3DLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libMP3DLA_L.so.2.0 libMP3DLA_L.so.2
+        ln -s libMP3DLA_L.so.2 libMP3DLA_L.so
+    fi
+
+    if [ "X${USE_WMA_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/${baselib}/libWMASTDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libWMASTDLA_L.so.2.0 libWMASTDLA_L.so.2
+        ln -s libWMASTDLA_L.so.2 libWMASTDLA_L.so
+    fi
+
+    if [ "X${USE_DD_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/${baselib}/libRSDACDLA_L.so.2.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSDACDLA_L.so.2.0 libRSDACDLA_L.so.2
+        ln -s libRSDACDLA_L.so.2 libRSDACDLA_L.so
+    fi
+
+    if [ "X${USE_AACLCE_MDW}" = "X1" ]; then
+        install -m 755 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/${baselib}/libRSAACELA_L.so.3.0 \
+            ${D}/${libdir}
+        install -m 644 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir}
+
+        ln -s libRSAACELA_L.so.3.0 libRSAACELA_L.so.3
+        ln -s libRSAACELA_L.so.3 libRSAACELA_L.so
+    fi
+}
+
+do_install_omx_audio() {
+    cd ${D}/${libdir}
+    for omxmc in ${OMX_AUDIO_SRC_LIST}
+    do
+        src="${WORKDIR}/${omxmc}/"
+        install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir}
+        if [ -d ${src}/include ]; then
+            install -m 644 ${src}/include/*.h ${D}/${includedir}
+        fi
+        install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr
+    done
+
+    if [ "X${USE_AUDIO_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_acmn.so.3.0.0 libomxr_mc_acmn.so.3
+        ln -s libomxr_mc_acmn.so.3 libomxr_mc_acmn.so
+    fi
+
+    if [ "X${USE_AACLCD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aacd.so.3.0.0 libomxr_mc_aacd.so.3
+        ln -s libomxr_mc_aacd.so.3 libomxr_mc_aacd.so
+    fi
+
+    if [ "X${USE_AACPV2D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aapd.so.3.0.0 libomxr_mc_aapd.so.3
+        ln -s libomxr_mc_aapd.so.3 libomxr_mc_aapd.so
+    fi
+
+    if [ "X${USE_MP3D_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_mp3d.so.3.0.0 libomxr_mc_mp3d.so.3
+        ln -s libomxr_mc_mp3d.so.3 libomxr_mc_mp3d.so
+    fi
+
+    if [ "X${USE_WMAD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_wmad.so.3.0.0 libomxr_mc_wmad.so.3
+        ln -s libomxr_mc_wmad.so.3 libomxr_mc_wmad.so
+    fi
+
+    if [ "X${USE_ALACD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_alacd.so.3.0.0 libomxr_mc_alacd.so.3
+        ln -s libomxr_mc_alacd.so.3 libomxr_mc_alacd.so
+    fi
+
+    if [ "X${USE_FLACD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_flacd.so.3.0.0 libomxr_mc_flacd.so.3
+        ln -s libomxr_mc_flacd.so.3 libomxr_mc_flacd.so
+    fi
+
+    if [ "X${USE_AACLCE_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_aace.so.3.0.0 libomxr_mc_aace.so.3
+        ln -s libomxr_mc_aace.so.3 libomxr_mc_aace.so
+    fi
+
+    if [ "X${USE_DDD_OMX}" = "X1" ]; then
+        ln -s libomxr_mc_ddd.so.3.0.0 libomxr_mc_ddd.so.3
+        ln -s libomxr_mc_ddd.so.3 libomxr_mc_ddd.so
+    fi
+}
+
+do_install () {
+    if [ "X${USE_OMX_COMMON}" = "X1" ]; then
+        oe_runmake 'DESTDIR=${D}' install
+        # Info dir listing isn't interesting at this point so remove it if it exists.
+        if [ -e "${D}/${infodir}/dir" ]; then
+            rm -f ${D}/${infodir}/dir
+        fi
+    fi
+}
+
+do_install_append() {
+    # Create destination directory
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+    if [ "X${USE_OMX_COMMON}" = "X1" ]; then
+        install -d ${D}/${sysconfdir}/omxr
+    fi
+
+    # Copy omx video library
+    do_install_omx_video
+    # Copy audio middleware library
+    do_install_audio_middleware
+    # Copy omx audio library
+    do_install_omx_audio
+}
+
+INSANE_SKIP_${PN} = "dev-so"
+
+FILES_${PN} += " \
+    ${libdir}/*.so \
+"
+
+FILES_${PN}-dev = " \
+    ${includedir} \
+    ${libdir}/*.la \
+"
+
+RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module"
+RDEPENDS_${PN} += '${@oe.utils.conditional("USE_ALACD_OMX", "1", "libalacdla-l", "", d )}'
+RDEPENDS_${PN} += '${@oe.utils.conditional("USE_FLACD_OMX", "1", "libflacdla-l", "", d )}'
+
+# Skip debug strip of do_populate_sysroot()
+INHIBIT_SYSROOT_STRIP = "1"
+
+# Skip debug split and strip of do_package()
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu/0001-Fix-QA-issue-when-build-with-Yocto.patch b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu/0001-Fix-QA-issue-when-build-with-Yocto.patch
new file mode 100644
index 00000000..dbc1eccb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu/0001-Fix-QA-issue-when-build-with-Yocto.patch
@@ -0,0 +1,34 @@
+From 5e9eff188ada13e1c1986d5611a42e0779fe7fd1 Mon Sep 17 00:00:00 2001
+From: Thao Nguyen <thao.nguyen.yb@renesas.com>
+Date: Mon, 18 Sep 2017 17:09:21 +0700
+Subject: [PATCH] Fix QA issue when build with Yocto
+
+Yocto project has updated Linker Hash Style Changed in YP2.4.
+Makefile should be updated to avoid QA error.
+
+ERROR: open-avb-1.1+gitAUTOINC+5e43fa5ae2-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/proj/yocto/gen3/v3.4.0-pt2/build/tmp/work/aarch64-poky-linux/open-avb/1.1+gitAUTOINC+5e43fa5ae2-r0/packages-split/open-avb-gptp/usr/bin/daemon_cl' [ldflags]
+ERROR: open-avb-1.1+gitAUTOINC+5e43fa5ae2-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
+ERROR: open-avb-1.1+gitAUTOINC+5e43fa5ae2-r0 do_package_qa: Function failed: do_package_qa
+
+Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
+Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
+---
+ daemons/gptp/linux/build/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/daemons/gptp/linux/build/Makefile b/daemons/gptp/linux/build/Makefile
+index 1e00b1a..99fbf84 100644
+--- a/daemons/gptp/linux/build/Makefile
++++ b/daemons/gptp/linux/build/Makefile
+@@ -131,7 +131,7 @@ LDFLAGS_G += -lpthread -lrt
+ 
+ CFLAGS = $(CFLAGS_G)
+ CPPFLAGS = $(CPPFLAGS_G)
+-LDFLAGS = $(LDFLAGS_G)
++LDFLAGS += $(LDFLAGS_G)
+ 
+ all: $(OBJ_DIR)/daemon_cl
+ 
+-- 
+1.9.1
+
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu_git.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu_git.bb
new file mode 100644
index 00000000..486a5b6e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/openavnu/openavnu_git.bb
@@ -0,0 +1,74 @@
+DESCRIPTION = "OpenAvnu - an AVnu sponsored repository for Time Sensitive Network (TSN and AVB) technology"
+HOMEPAGE = "https://github.com/AVnu/OpenAvnu"
+LICENSE = "BSD & MIT & GPLv2 & LGPLv2"
+LIC_FILES_CHKSUM = " \
+    file://daemons/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \
+    file://daemons/shaper/LICENSE;md5=53e60f7a40864e4c075831415f2ecc59 \
+    file://kmod/igb/COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+    file://kmod/igb/LICENSE;md5=e2c0cd0820d168b0b26e19f13df4dc56 \
+    file://lib/igb/LICENSE;md5=9bc783ca40be823a8b237df5eed80fc4 \
+    file://lib/avtp_pipeline/LICENSE;md5=485c2c585be88b59c3ee70a016f27959 \
+    file://examples/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \
+    file://examples/gstreamer-avb-plugins/COPYING.LIB;md5=55ca817ccb7d5b5b66355690e9abc605 \
+    file://examples/gstreamer-avb-plugins/COPYING.MIT;md5=bba6cdb9c2b03c849ed4975ed9ed90dc \
+"
+
+DEPENDS = "libpcap"
+
+PV = "1.1+git${SRCPV}"
+
+SRCREV = "5e43fa5ae27fbd2b89c320670a32143ce93e0e16"
+SRC_URI = "git://github.com/AVnu/OpenAvnu.git;branch=master"
+
+# Fix QA issue of ldflags
+SRC_URI_append = " file://0001-Fix-QA-issue-when-build-with-Yocto.patch"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE = "'CC=${CC}' 'CXX=${CXX}'"
+
+do_configure() {
+    oe_runmake daemons_all_clean
+}
+
+do_compile() {
+    oe_runmake daemons_all
+}
+
+do_install() {
+    install -d ${D}/${bindir}
+    install -m 755 daemons/maap/linux/build/maap_daemon ${D}/${bindir}
+    install -m 755 daemons/mrpd/mrpd daemons/mrpd/mrpctl ${D}/${bindir}
+    install -m 755 daemons/gptp/linux/build/obj/daemon_cl ${D}/${bindir}
+}
+
+PACKAGES =+ " \
+    ${PN}-gptp \
+    ${PN}-mrpd \
+    ${PN}-maap \
+"
+
+ALLOW_EMPTY_${PN} = "1"
+
+FILES_${PN}-gptp = " \
+    ${bindir}/daemon_cl \
+"
+
+FILES_${PN}-mrpd = " \
+    ${bindir}/mrpd \
+    ${bindir}/mrpctl \
+"
+
+FILES_${PN}-maap = " \
+    ${bindir}/maap_daemon \
+"
+
+RDEPENDS_${PN} = " \
+    ${PN}-gptp \
+    ${PN}-mrpd \
+    ${PN}-maap \
+"
+
+RDEPENDS_${PN}-maap = " \
+    libpcap \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb
new file mode 100644
index 00000000..e6894409
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb
@@ -0,0 +1,85 @@
+SUMMARY = "GStreamer 1.0 package groups"
+LICENSE = "MIT"
+
+require include/omx-control.inc
+
+DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good"
+DEPENDS += "gstreamer1.0-plugins-bad"
+DEPENDS += "gstreamer1.0-plugins-ugly"
+DEPENDS += "${@oe.utils.conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)}"
+
+LIC_FILES_CHKSUM = " \
+    file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302 \
+"
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-gstreamer1.0-plugins \
+    packagegroup-gstreamer1.0-plugins-base \
+    packagegroup-gstreamer1.0-plugins-audio \
+    packagegroup-gstreamer1.0-plugins-video \
+    ${@oe.utils.conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \
+    packagegroup-gstreamer1.0-plugins-debug \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins = " \
+    packagegroup-gstreamer1.0-plugins-base \
+    packagegroup-gstreamer1.0-plugins-audio \
+    packagegroup-gstreamer1.0-plugins-video \
+    ${@oe.utils.conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \
+    packagegroup-gstreamer1.0-plugins-debug \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-base = " \
+    gstreamer1.0-meta-base \
+    gstreamer1.0-plugins-base-typefindfunctions \
+    gstreamer1.0-plugins-good-id3demux \
+    gstreamer1.0-plugins-good-autodetect \
+    ${@oe.utils.conditional("USE_OMX_COMMON", "1", "gstreamer1.0-plugin-vspfilter", "", d)} \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-audio = " \
+    gstreamer1.0-meta-audio \
+    gstreamer1.0-plugins-good-audioparsers \
+    gstreamer1.0-plugins-base-audiotestsrc \
+    gstreamer1.0-plugins-base-audioconvert \
+    gstreamer1.0-plugins-base-audioresample \
+    gstreamer1.0-plugins-base-alsa \
+    gstreamer1.0-plugins-base-ogg \
+    gstreamer1.0-plugins-base-vorbis \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-video = " \
+    gstreamer1.0-meta-video \
+    gstreamer1.0-plugins-base-videotestsrc \
+    gstreamer1.0-plugins-base-videoconvert \
+    gstreamer1.0-plugins-base-playback \
+    gstreamer1.0-plugins-base-videoscale \
+    gstreamer1.0-plugins-base-videorate \
+    gstreamer1.0-plugins-good-matroska \
+    gstreamer1.0-plugins-good-isomp4 \
+    gstreamer1.0-plugins-good-avi \
+    gstreamer1.0-plugins-good-videofilter \
+    gstreamer1.0-plugins-good-videomixer \
+    gstreamer1.0-plugins-good-videocrop \
+    gstreamer1.0-plugins-good-video4linux2 \
+    gstreamer1.0-plugins-good-jpeg \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', \
+        'gstreamer1.0-plugins-bad-waylandsink', '', d)} \
+    gstreamer1.0-plugins-bad-videoparsersbad \
+    gstreamer1.0-plugins-bad-mpegtsdemux \
+    gstreamer1.0-plugins-bad-jpegformat \
+    gstreamer1.0-plugins-ugly-asf \
+    gstreamer1.0-libav \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-omx = " \
+    ${@oe.utils.conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)} \
+"
+
+RDEPENDS_packagegroup-gstreamer1.0-plugins-debug = " \
+    gstreamer1.0-meta-debug \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb
new file mode 100644
index 00000000..7e8e7e43
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb
@@ -0,0 +1,31 @@
+SUMMARY = "Multimedia kernel modules package groups"
+LICENSE = "GPLv2 & MIT"
+
+require include/omx-control.inc
+
+DEPENDS = "kernel-module-mmngr kernel-module-mmngrbuf \
+    kernel-module-vspm kernel-module-vspmif \
+    kernel-module-vsp2driver \
+"
+
+DEPENDS += '${@oe.utils.conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}'
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-multimedia-kernel-modules \
+"
+
+RDEPENDS_packagegroup-multimedia-kernel-modules = " \
+    kernel-module-mmngr \
+    kernel-module-mmngrbuf \
+    kernel-module-vspm \
+    kernel-module-vspmif \
+    kernel-module-vsp2driver \
+"
+
+RDEPENDS_packagegroup-multimedia-kernel-modules += " \
+    ${@oe.utils.conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )} \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb
new file mode 100644
index 00000000..323f6aeb
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb
@@ -0,0 +1,20 @@
+SUMMARY = "Multimedia user libraries modules package groups"
+LICENSE = "MIT"
+
+DEPENDS = "mmngr-user-module mmngrbuf-user-module \
+    vspmif-user-module libalacdla-l libflacdla-l \
+"
+
+PR = "r0"
+
+inherit packagegroup
+
+PACKAGES = " \
+    packagegroup-multimedia-libs \
+"
+
+RDEPENDS_packagegroup-multimedia-libs = " \
+    mmngr-user-module mmngrbuf-user-module \
+    vspmif-user-module \
+    libalacdla-l libflacdla-l \
+"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb
new file mode 100644
index 00000000..0070563c
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb
@@ -0,0 +1,46 @@
+DESCRIPTION = "VSP Manager Interface test app for R-Car Gen3"
+
+require vspmif.inc
+
+DEPENDS = "vspmif-user-module mmngr-user-module"
+PN = "vspmif-tp-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+VSPMIF_TP_DIR = "vspm_if-tp-user/files/vspm_if"
+
+# Get Wordsize of test app and change their names later to avoid override
+WS_aarch64 = ""
+WS_virtclass-multilib-lib32 = "32"
+
+do_compile() {
+    cd ${S}/${VSPMIF_TP_DIR}
+    make all
+}
+
+do_install() {
+    # Create destination folder
+    install -d ${D}${RENESAS_DATADIR}/bin/
+
+    # Copy user test program
+    if [ X${WS} = "X32" ]; then
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}${RENESAS_DATADIR}/bin/vspm_tp32
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}${RENESAS_DATADIR}/bin/fdpm_tp32
+    else
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}${RENESAS_DATADIR}/bin/
+        install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}${RENESAS_DATADIR}/bin/
+    fi
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dbg \
+"
+FILES_${PN} = " \
+    ${@oe.utils.conditional('WS', '32', '${RENESAS_DATADIR}/bin/vspm_tp32 ${RENESAS_DATADIR}/bin/fdpm_tp32', \
+    '${RENESAS_DATADIR}/bin/vspm_tp ${RENESAS_DATADIR}/bin/fdpm_tp', d)}"
+
+FILES_${PN}-dbg = " \
+    ${RENESAS_DATADIR}/bin/.debug/*"
+
+RPROVIDES_${PN} += "vspmif-tp-user-module"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb
new file mode 100644
index 00000000..bf7fef63
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb
@@ -0,0 +1,49 @@
+DESCRIPTION = "VSP Manager Interface library for R-Car Gen3"
+
+require vspmif.inc
+
+DEPENDS = "kernel-module-vspmif mmngr-user-module"
+PN = "vspmif-user-module"
+PR = "r0"
+
+S = "${WORKDIR}/git"
+VSPMIF_LIB_DIR = "vspm_if-module/files/vspm_if"
+
+EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}"
+
+includedir = "${RENESAS_DATADIR}/include"
+
+do_compile() {
+    export VSPM_LEGACY_IF="1"
+
+    # Build shared library
+    cd ${S}/${VSPMIF_LIB_DIR}/if
+    rm -rf ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so*
+    oe_runmake
+}
+
+do_install() {
+    # Create destination folders
+    install -d ${D}/${libdir}
+    install -d ${D}/${includedir}
+
+    # Copy shared library
+    install -m 755 ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* ${D}/${libdir}/
+    cd ${D}/${libdir}/
+    ln -sf libvspm.so.1.0.0 libvspm.so.1
+    ln -sf libvspm.so.1 libvspm.so
+
+    # Copy shared header files
+    install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/vspm_public.h ${D}/${includedir}/
+    install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/fdpm_api.h ${D}/${includedir}/
+}
+
+PACKAGES = "\
+    ${PN} \
+    ${PN}-dev \
+    ${PN}-dbg \
+"
+
+RPROVIDES_${PN} += "vspmif-user-module"
+INSANE_SKIP_${PN} += "libdir"
+INSANE_SKIP_${PN}-dev += "libdir"
diff --git a/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc
new file mode 100644
index 00000000..34e8587e
--- /dev/null
+++ b/bsp/meta-renesas-rcar-gen3/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc
@@ -0,0 +1,15 @@
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = " \
+    file://COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a \
+"
+
+require include/rcar-gen3-modules-common.inc
+
+VSPMIF_LIB_URL = "git://github.com/renesas-rcar/vspmif_lib.git"
+BRANCH = "rcar_gen3"
+SRCREV = "06fe8b1341801079f8a2b964ea95980967dcf789"
+
+SRC_URI = "${VSPMIF_LIB_URL};branch=${BRANCH}"
+
+# This module is machine specific.
+PACKAGE_ARCH = "${MACHINE_ARCH}"