agl-basesystem

42 files changed, 2357 insertions, 0 deletions

diff --git a/external/poky/meta/lib/oeqa/runtime/case.py b/external/poky/meta/lib/oeqa/runtime/case.py
new file mode 100644
index 00000000..2f190acf
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/case.py
@@ -0,0 +1,17 @@
+# Copyright (C) 2016 Intel Corporation
+# Released under the MIT license (see COPYING.MIT)
+
+from oeqa.core.case import OETestCase
+from oeqa.utils.package_manager import install_package, uninstall_package
+
+class OERuntimeTestCase(OETestCase):
+    # target instance set by OERuntimeTestLoader.
+    target = None
+
+    def setUp(self):
+        super(OERuntimeTestCase, self).setUp()
+        install_package(self)
+
+    def tearDown(self):
+        super(OERuntimeTestCase, self).tearDown()
+        uninstall_package(self)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/_qemutiny.py b/external/poky/meta/lib/oeqa/runtime/cases/_qemutiny.py
new file mode 100644
index 00000000..7b5b4814
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/_qemutiny.py
@@ -0,0 +1,8 @@
+from oeqa.runtime.case import OERuntimeTestCase
+
+class QemuTinyTest(OERuntimeTestCase):
+
+    def test_boot_tiny(self):
+        status, output = self.target.run_serial('uname -a')
+        msg = "Cannot detect poky tiny boot!"
+        self.assertTrue("yocto-tiny" in output, msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/apt.py b/external/poky/meta/lib/oeqa/runtime/cases/apt.py
new file mode 100644
index 00000000..793143f7
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/apt.py
@@ -0,0 +1,47 @@
+import os
+from oeqa.utils.httpserver import HTTPService
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.data import skipIfNotDataVar, skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class AptTest(OERuntimeTestCase):
+
+    def pkg(self, command, expected = 0):
+        command = 'apt-get %s' % command
+        status, output = self.target.run(command, 1500)
+        message = os.linesep.join([command, output])
+        self.assertEqual(status, expected, message)
+        return output
+
+class AptRepoTest(AptTest):
+
+    @classmethod
+    def setUpClass(cls):
+        service_repo = os.path.join(cls.tc.td['DEPLOY_DIR_DEB'], 'all')
+        cls.repo_server = HTTPService(service_repo, cls.tc.target.server_ip, logger=cls.tc.logger)
+        cls.repo_server.start()
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.repo_server.stop()
+
+    def setup_source_config_for_package_install(self):
+        apt_get_source_server = 'http://%s:%s/' % (self.tc.target.server_ip, self.repo_server.port)
+        apt_get_sourceslist_dir = '/etc/apt/'
+        self.target.run('cd %s; echo deb %s ./ > sources.list' % (apt_get_sourceslist_dir, apt_get_source_server))
+
+    def cleanup_source_config_for_package_install(self):
+        apt_get_sourceslist_dir = '/etc/apt/'
+        self.target.run('cd %s; rm sources.list' % (apt_get_sourceslist_dir))
+
+    @skipIfNotFeature('package-management',
+                      'Test requires package-management to be in IMAGE_FEATURES')
+    @skipIfNotDataVar('IMAGE_PKGTYPE', 'deb',
+                      'DEB is not the primary package manager')
+    @OEHasPackage(['apt'])
+    def test_apt_install_from_repo(self):
+        self.setup_source_config_for_package_install()
+        self.pkg('update')
+        self.pkg('remove --yes run-postinsts-dev')
+        self.pkg('install --yes --allow-unauthenticated run-postinsts-dev')
+        self.cleanup_source_config_for_package_install()
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/buildcpio.py b/external/poky/meta/lib/oeqa/runtime/cases/buildcpio.py
new file mode 100644
index 00000000..a61d1e03
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/buildcpio.py
@@ -0,0 +1,30 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class BuildCpioTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        uri = 'https://downloads.yoctoproject.org/mirror/sources/cpio-2.12.tar.gz'
+        cls.project = TargetBuildProject(cls.tc.target,
+                                         uri,
+                                         dl_dir = cls.tc.td['DL_DIR'])
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.project.clean()
+
+    @OETestID(205)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['gcc'])
+    @OEHasPackage(['make'])
+    @OEHasPackage(['autoconf'])
+    def test_cpio(self):
+        self.project.download_archive()
+        self.project.run_configure()
+        self.project.run_make()
+        self.project.run_install()
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/buildgalculator.py b/external/poky/meta/lib/oeqa/runtime/cases/buildgalculator.py
new file mode 100644
index 00000000..a0a00320
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/buildgalculator.py
@@ -0,0 +1,29 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class GalculatorTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        uri = 'http://galculator.mnim.org/downloads/galculator-2.1.4.tar.bz2'
+        cls.project = TargetBuildProject(cls.tc.target,
+                                         uri,
+                                         dl_dir = cls.tc.td['DL_DIR'])
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.project.clean()
+
+    @OETestID(1526)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['gcc'])
+    @OEHasPackage(['make'])
+    @OEHasPackage(['autoconf'])
+    def test_galculator(self):
+        self.project.download_archive()
+        self.project.run_configure()
+        self.project.run_make()
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/buildlzip.py b/external/poky/meta/lib/oeqa/runtime/cases/buildlzip.py
new file mode 100644
index 00000000..5b455a07
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/buildlzip.py
@@ -0,0 +1,32 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class BuildLzipTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        uri = 'http://downloads.yoctoproject.org/mirror/sources'
+        uri = '%s/lzip-1.19.tar.gz' % uri
+        cls.project = TargetBuildProject(cls.tc.target,
+                                         uri,
+                                         dl_dir = cls.tc.td['DL_DIR'])
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.project.clean()
+
+    @OETestID(206)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['gcc'])
+    @OEHasPackage(['make'])
+    @OEHasPackage(['autoconf'])
+    def test_lzip(self):
+        self.project.download_archive()
+        self.project.run_configure()
+        self.project.run_make()
+        self.project.run_install()
+
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/connman.py b/external/poky/meta/lib/oeqa/runtime/cases/connman.py
new file mode 100644
index 00000000..12456b41
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/connman.py
@@ -0,0 +1,30 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class ConnmanTest(OERuntimeTestCase):
+
+    def service_status(self, service):
+        if 'systemd' in self.tc.td['DISTRO_FEATURES']:
+            (_, output) = self.target.run('systemctl status -l %s' % service)
+            return output
+        else:
+            return "Unable to get status or logs for %s" % service
+
+    @OETestID(961)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(["connman"])
+    def test_connmand_help(self):
+        (status, output) = self.target.run('/usr/sbin/connmand --help')
+        msg = 'Failed to get connman help. Output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(221)
+    @OETestDepends(['connman.ConnmanTest.test_connmand_help'])
+    def test_connmand_running(self):
+        cmd = '%s | grep [c]onnmand' % self.tc.target_cmds['ps']
+        (status, output) = self.target.run(cmd)
+        if status != 0:
+            self.logger.info(self.service_status("connman"))
+            self.fail("No connmand process running")
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/date.py b/external/poky/meta/lib/oeqa/runtime/cases/date.py
new file mode 100644
index 00000000..0887b831
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/date.py
@@ -0,0 +1,40 @@
+import re
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class DateTest(OERuntimeTestCase):
+
+    def setUp(self):
+        if self.tc.td.get('VIRTUAL-RUNTIME_init_manager') == 'systemd':
+            self.logger.debug('Stopping systemd-timesyncd daemon')
+            self.target.run('systemctl stop systemd-timesyncd')
+
+    def tearDown(self):
+        if self.tc.td.get('VIRTUAL-RUNTIME_init_manager') == 'systemd':
+            self.logger.debug('Starting systemd-timesyncd daemon')
+            self.target.run('systemctl start systemd-timesyncd')
+
+    @OETestID(211)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['coreutils', 'busybox'])
+    def test_date(self):
+        (status, output) = self.target.run('date +"%Y-%m-%d %T"')
+        msg = 'Failed to get initial date, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+        oldDate = output
+
+        sampleDate = '"2016-08-09 10:00:00"'
+        (status, output) = self.target.run("date -s %s" % sampleDate)
+        self.assertEqual(status, 0, msg='Date set failed, output: %s' % output)
+
+        (status, output) = self.target.run("date -R")
+        p = re.match('Tue, 09 Aug 2016 10:00:.. \+0000', output)
+        msg = 'The date was not set correctly, output: %s' % output
+        self.assertTrue(p, msg=msg)
+
+        (status, output) = self.target.run('date -s "%s"' % oldDate)
+        msg = 'Failed to reset date, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/df.py b/external/poky/meta/lib/oeqa/runtime/cases/df.py
new file mode 100644
index 00000000..e0b6bb83
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/df.py
@@ -0,0 +1,15 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class DfTest(OERuntimeTestCase):
+
+    @OETestID(234)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['coreutils', 'busybox'])
+    def test_df(self):
+        cmd = "df / | sed -n '2p' | awk '{print $4}'"
+        (status,output) = self.target.run(cmd)
+        msg = 'Not enough space on image. Current size is %s' % output
+        self.assertTrue(int(output)>5120, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/dnf.py b/external/poky/meta/lib/oeqa/runtime/cases/dnf.py
new file mode 100644
index 00000000..c1ed39d7
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/dnf.py
@@ -0,0 +1,167 @@
+import os
+import re
+import subprocess
+from oeqa.utils.httpserver import HTTPService
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotDataVar, skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class DnfTest(OERuntimeTestCase):
+
+    def dnf(self, command, expected = 0):
+        command = 'dnf %s' % command
+        status, output = self.target.run(command, 1500)
+        message = os.linesep.join([command, output])
+        self.assertEqual(status, expected, message)
+        return output
+
+class DnfBasicTest(DnfTest):
+
+    @skipIfNotFeature('package-management',
+                      'Test requires package-management to be in IMAGE_FEATURES')
+    @skipIfNotDataVar('IMAGE_PKGTYPE', 'rpm',
+                      'RPM is not the primary package manager')
+    @OEHasPackage(['dnf'])
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OETestID(1735)
+    def test_dnf_help(self):
+        self.dnf('--help')
+
+    @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+    @OETestID(1739)
+    def test_dnf_version(self):
+        self.dnf('--version')
+
+    @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+    @OETestID(1737)
+    def test_dnf_info(self):
+        self.dnf('info dnf')
+
+    @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+    @OETestID(1738)
+    def test_dnf_search(self):
+        self.dnf('search dnf')
+
+    @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+    @OETestID(1736)
+    def test_dnf_history(self):
+        self.dnf('history')
+
+class DnfRepoTest(DnfTest):
+
+    @classmethod
+    def setUpClass(cls):
+        cls.repo_server = HTTPService(os.path.join(cls.tc.td['WORKDIR'], 'oe-testimage-repo'),
+                                      cls.tc.target.server_ip, logger=cls.tc.logger)
+        cls.repo_server.start()
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.repo_server.stop()
+
+    def dnf_with_repo(self, command):
+        pkgarchs = os.listdir(os.path.join(self.tc.td['WORKDIR'], 'oe-testimage-repo'))
+        deploy_url = 'http://%s:%s/' %(self.target.server_ip, self.repo_server.port)
+        cmdlinerepoopts = ["--repofrompath=oe-testimage-repo-%s,%s%s" %(arch, deploy_url, arch) for arch in pkgarchs]
+
+        output = self.dnf(" ".join(cmdlinerepoopts) + " --nogpgcheck " + command)
+        return output
+
+    @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+    @OETestID(1744)
+    def test_dnf_makecache(self):
+        self.dnf_with_repo('makecache')
+
+
+# Does not work when repo is specified on the command line
+#    @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+#    def test_dnf_repolist(self):
+#        self.dnf_with_repo('repolist')
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+    @OETestID(1746)
+    def test_dnf_repoinfo(self):
+        self.dnf_with_repo('repoinfo')
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+    @OETestID(1740)
+    def test_dnf_install(self):
+        output = self.dnf_with_repo('list run-postinsts-dev')
+        if 'Installed Packages' in output:
+            self.dnf_with_repo('remove -y run-postinsts-dev')
+        self.dnf_with_repo('install -y run-postinsts-dev')
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_install'])
+    @OETestID(1741)
+    def test_dnf_install_dependency(self):
+        self.dnf_with_repo('remove -y run-postinsts')
+        self.dnf_with_repo('install -y run-postinsts-dev')
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_install_dependency'])
+    @OETestID(1742)
+    def test_dnf_install_from_disk(self):
+        self.dnf_with_repo('remove -y run-postinsts-dev')
+        self.dnf_with_repo('install -y --downloadonly run-postinsts-dev')
+        status, output = self.target.run('find /var/cache/dnf -name run-postinsts-dev*rpm', 1500)
+        self.assertEqual(status, 0, output)
+        self.dnf_with_repo('install -y %s' % output)
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_install_from_disk'])
+    @OETestID(1743)
+    def test_dnf_install_from_http(self):
+        output = subprocess.check_output('%s %s -name run-postinsts-dev*' % (bb.utils.which(os.getenv('PATH'), "find"),
+                                                                           os.path.join(self.tc.td['WORKDIR'], 'oe-testimage-repo')), shell=True).decode("utf-8")
+        rpm_path = output.split("/")[-2] + "/" + output.split("/")[-1]
+        url = 'http://%s:%s/%s' %(self.target.server_ip, self.repo_server.port, rpm_path)
+        self.dnf_with_repo('remove -y run-postinsts-dev')
+        self.dnf_with_repo('install -y %s' % url)
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_install'])
+    @OETestID(1745)
+    def test_dnf_reinstall(self):
+        self.dnf_with_repo('reinstall -y run-postinsts-dev')
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+    @OETestID(1771)
+    def test_dnf_installroot(self):
+        rootpath = '/home/root/chroot/test'
+        #Copy necessary files to avoid errors with not yet installed tools on
+        #installroot directory.
+        self.target.run('mkdir -p %s/etc' % rootpath, 1500)
+        self.target.run('mkdir -p %s/bin %s/sbin %s/usr/bin %s/usr/sbin' % (rootpath, rootpath, rootpath, rootpath), 1500)
+        self.target.run('mkdir -p %s/dev' % rootpath, 1500)
+        #Handle different architectures lib dirs
+        self.target.run('mkdir -p %s/lib' % rootpath, 1500)
+        self.target.run('mkdir -p %s/libx32' % rootpath, 1500)
+        self.target.run('mkdir -p %s/lib64' % rootpath, 1500)
+        self.target.run('cp /lib/libtinfo.so.5 %s/lib' % rootpath, 1500)
+        self.target.run('cp /libx32/libtinfo.so.5 %s/libx32' % rootpath, 1500)
+        self.target.run('cp /lib64/libtinfo.so.5 %s/lib64' % rootpath, 1500)
+        self.target.run('cp -r /etc/rpm %s/etc' % rootpath, 1500)
+        self.target.run('cp -r /etc/dnf %s/etc' % rootpath, 1500)
+        self.target.run('cp /bin/sh %s/bin' % rootpath, 1500)
+        self.target.run('mount -o bind /dev %s/dev/' % rootpath, 1500)
+        self.dnf_with_repo('install --installroot=%s -v -y --rpmverbosity=debug busybox run-postinsts' % rootpath)
+        status, output = self.target.run('test -e %s/var/cache/dnf' % rootpath, 1500)
+        self.assertEqual(0, status, output)
+        status, output = self.target.run('test -e %s/bin/busybox' % rootpath, 1500)
+        self.assertEqual(0, status, output)
+
+    @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+    @OETestID(1772)
+    def test_dnf_exclude(self):
+        excludepkg = 'curl-dev'
+        self.dnf_with_repo('install -y curl*')
+        self.dnf('list %s' % excludepkg, 0)
+        #Avoid remove dependencies to skip some errors on different archs and images
+        self.dnf_with_repo('remove --setopt=clean_requirements_on_remove=0 -y curl*')
+        #check curl-dev is not installed adter removing all curl occurrences
+        status, output = self.target.run('dnf list --installed | grep %s'% excludepkg, 1500)
+        self.assertEqual(1, status, "%s was not removed,  is listed as installed"%excludepkg)
+        self.dnf_with_repo('install -y --exclude=%s --exclude=curl-staticdev curl*' % excludepkg)
+        #check curl-dev is not installed after being excluded
+        status, output = self.target.run('dnf list --installed | grep %s'% excludepkg , 1500)
+        self.assertEqual(1, status, "%s was not excluded, is listed as installed"%excludepkg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/gcc.py b/external/poky/meta/lib/oeqa/runtime/cases/gcc.py
new file mode 100644
index 00000000..8265c59f
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/gcc.py
@@ -0,0 +1,70 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class GccCompileTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUp(cls):
+        dst = '/tmp/'
+        src = os.path.join(cls.tc.files_dir, 'test.c')
+        cls.tc.target.copyTo(src, dst)
+
+        src = os.path.join(cls.tc.runtime_files_dir, 'testmakefile')
+        cls.tc.target.copyTo(src, dst)
+
+        src = os.path.join(cls.tc.files_dir, 'test.cpp')
+        cls.tc.target.copyTo(src, dst)
+
+    @classmethod
+    def tearDown(cls):
+        files = '/tmp/test.c /tmp/test.o /tmp/test /tmp/testmakefile'
+        cls.tc.target.run('rm %s' % files)
+
+    @OETestID(203)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['gcc'])
+    def test_gcc_compile(self):
+        status, output = self.target.run('gcc /tmp/test.c -o /tmp/test -lm')
+        msg = 'gcc compile failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        status, output = self.target.run('/tmp/test')
+        msg = 'running compiled file failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(200)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['g++'])
+    def test_gpp_compile(self):
+        status, output = self.target.run('g++ /tmp/test.c -o /tmp/test -lm')
+        msg = 'g++ compile failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        status, output = self.target.run('/tmp/test')
+        msg = 'running compiled file failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(1142)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['g++'])
+    def test_gpp2_compile(self):
+        status, output = self.target.run('g++ /tmp/test.cpp -o /tmp/test -lm')
+        msg = 'g++ compile failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        status, output = self.target.run('/tmp/test')
+        msg = 'running compiled file failed, output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(204)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['gcc'])
+    @OEHasPackage(['make'])
+    def test_make(self):
+        status, output = self.target.run('cd /tmp; make -f testmakefile')
+        msg = 'running make failed, output %s' % output
+        self.assertEqual(status, 0, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/gi.py b/external/poky/meta/lib/oeqa/runtime/cases/gi.py
new file mode 100644
index 00000000..19073e52
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/gi.py
@@ -0,0 +1,15 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class GObjectIntrospectionTest(OERuntimeTestCase):
+
+    @OETestDepends(["ssh.SSHTest.test_ssh"])
+    @OEHasPackage(["python3-pygobject"])
+    def test_python(self):
+        script = """from gi.repository import GObject; print(GObject.markup_escape_text("<testing&testing>"))"""
+        status, output = self.target.run("python3 -c '%s'" % script)
+        self.assertEqual(status, 0, msg="Python failed (%s)" % (output))
+        self.assertEqual(output, "&lt;testing&amp;testing&gt;", msg="Unexpected output (%s)" % output)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/kernelmodule.py b/external/poky/meta/lib/oeqa/runtime/cases/kernelmodule.py
new file mode 100644
index 00000000..27a2c35b
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/kernelmodule.py
@@ -0,0 +1,44 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class KernelModuleTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUp(cls):
+        src = os.path.join(cls.tc.runtime_files_dir, 'hellomod.c')
+        dst = '/tmp/hellomod.c'
+        cls.tc.target.copyTo(src, dst)
+
+        src = os.path.join(cls.tc.runtime_files_dir, 'hellomod_makefile')
+        dst = '/tmp/Makefile'
+        cls.tc.target.copyTo(src, dst)
+
+    @classmethod
+    def tearDown(cls):
+        files = '/tmp/Makefile /tmp/hellomod.c'
+        cls.tc.target.run('rm %s' % files)
+
+    @OETestID(1541)
+    @skipIfNotFeature('tools-sdk',
+                      'Test requires tools-sdk to be in IMAGE_FEATURES')
+    @OETestDepends(['gcc.GccCompileTest.test_gcc_compile'])
+    @OEHasPackage(['kernel-devsrc'])
+    @OEHasPackage(['make'])
+    @OEHasPackage(['gcc'])
+    def test_kernel_module(self):
+        cmds = [
+            'cd /usr/src/kernel && make scripts prepare',
+            'cd /tmp && make',
+            'cd /tmp && insmod hellomod.ko',
+            'lsmod | grep hellomod',
+            'dmesg | grep Hello',
+            'rmmod hellomod', 'dmesg | grep "Cleaning up hellomod"'
+            ]
+        for cmd in cmds:
+            status, output = self.target.run(cmd, 900)
+            self.assertEqual(status, 0, msg='\n'.join([cmd, output]))
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/ksample.py b/external/poky/meta/lib/oeqa/runtime/cases/ksample.py
new file mode 100644
index 00000000..354cc976
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/ksample.py
@@ -0,0 +1,221 @@
+import os
+import time
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+# need some kernel fragments
+# echo "KERNEL_FEATURES_append += \" features\/kernel\-sample\/kernel\-sample.scc\"" >> local.conf
+class KSample(OERuntimeTestCase):
+    def cmd_and_check(self, cmd='', match_string=''):
+        status, output = self.target.run(cmd)
+        if not match_string:
+            # send cmd
+            msg = '%s failed, %s' % (cmd, output)
+            self.assertEqual(status, 0, msg=msg)
+        else:
+            # check result
+            result = ("%s" % match_string) in output
+            msg = output
+            self.assertTrue(result, msg)
+            self.assertEqual(status, 0, cmd)
+
+    def check_config(self, config_opt=''):
+        cmd = "zcat /proc/config.gz | grep %s" % config_opt
+        status, output = self.target.run(cmd)
+        result = ("%s=y" % config_opt) in output
+        if not result:
+            self.skipTest("%s is not set" % config_opt)
+
+    def check_module_exist(self, path='', module_name=''):
+        status, output = self.target.run("uname -r")
+        cmd = "ls " + "/lib/modules/" + output + "/kernel/samples/" + path + module_name
+        status, output = self.target.run(cmd)
+        if status != 0:
+            error_info = module_name + " doesn't exist"
+            self.skipTest(error_info)
+
+    def kfifo_func(self, name=''):
+        module_prename = name + "-example"
+        module_name = name + "-example.ko"
+        sysmbol_name = name + "_example"
+
+        # make sure if module exists
+        self.check_module_exist("kfifo/", module_name)
+        # modprobe
+        self.cmd_and_check("modprobe %s" % module_prename)
+        # lsmod
+        self.cmd_and_check("lsmod | grep %s | cut -d\' \' -f1" % sysmbol_name, sysmbol_name)
+        # check result
+        self.cmd_and_check("dmesg | grep \"test passed\" ", "test passed")
+        # rmmod
+        self.cmd_and_check("rmmod %s" %  module_prename)
+
+    def kprobe_func(self, name=''):
+        # check config
+        self.check_config("CONFIG_KPROBES")
+
+        module_prename = name + "_example"
+        module_name = name + "_example.ko"
+        sysmbol_name = module_prename
+
+        # make sure if module exists
+        self.check_module_exist("kprobes/", module_name)
+        # modprobe
+        self.cmd_and_check("modprobe %s" % module_prename)
+        # lsmod
+        self.cmd_and_check("lsmod | grep %s | cut -d\' \' -f1" % sysmbol_name, sysmbol_name)
+        # check result
+        self.cmd_and_check("dmesg | grep Planted | head -n10", "Planted")
+        # rmmod
+        self.cmd_and_check("rmmod %s" % module_prename)
+
+    def kobject_func(self, name=''):
+        module_prename = name + "_example"
+        module_name = name + "-example.ko"
+        sysmbol_name = module_prename
+
+        # make sure if module exists
+        self.check_module_exist("kobject/", module_name)
+        # modprobe
+        self.cmd_and_check("modprobe %s" % module_prename)
+        # lsmod
+        self.cmd_and_check("lsmod | grep %s | cut -d\' \' -f1" % sysmbol_name, sysmbol_name)
+        # check result
+        self.cmd_and_check("ls /sys/kernel/%s/" % sysmbol_name, "bar")
+        # rmmod
+        self.cmd_and_check("rmmod %s" % module_prename)
+
+class KSampleTest(KSample):
+    # kfifo
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_kfifo_test(self):
+        index = ["dma", "bytestream", "inttype", "record"]
+        for i in index:
+            self.kfifo_func(i)
+
+    # kprobe
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_kprobe_test(self):
+        index = ["kprobe", "kretprobe"]
+        for i in index:
+            self.kprobe_func(i)
+
+    # kobject
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_kobject_test(self):
+        index = ["kobject", "kset"]
+        for i in index:
+            self.kobject_func(i)
+
+    #trace
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_trace_events(self):
+        # check config
+        self.check_config("CONFIG_TRACING_SUPPORT")
+        # make sure if module exists
+        self.check_module_exist("trace_events/", "trace-events-sample.ko")
+        # modprobe
+        self.cmd_and_check("modprobe trace-events-sample")
+        # lsmod
+        self.cmd_and_check("lsmod | grep trace_events_sample | cut -d\' \' -f1", "trace_events_sample")
+        # check dir
+        self.cmd_and_check("ls /sys/kernel/debug/tracing/events/ | grep sample-trace", "sample-trace")
+        # enable trace
+        self.cmd_and_check("echo 1 > /sys/kernel/debug/tracing/events/sample-trace/enable")
+        self.cmd_and_check("cat /sys/kernel/debug/tracing/events/sample-trace/enable")
+        # check result
+        status = 1
+        count = 0
+        while status != 0:
+            time.sleep(1)
+            status, output = self.target.run('cat /sys/kernel/debug/tracing/trace | grep hello | head -n1 | cut -d\':\' -f2')
+            if " foo_bar" in output:
+                break
+            count = count + 1
+            if count > 5:
+                self.assertTrue(False, "Time out when check result")
+        # disable trace
+        self.cmd_and_check("echo 0 > /sys/kernel/debug/tracing/events/sample-trace/enable")
+        # clean up trace
+        self.cmd_and_check("echo > /sys/kernel/debug/tracing/trace")
+        # rmmod
+        self.cmd_and_check("rmmod trace-events-sample")
+
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_trace_printk(self):
+        # check config
+        self.check_config("CONFIG_TRACING_SUPPORT")
+        # make sure if module exists
+        self.check_module_exist("trace_printk/", "trace-printk.ko")
+        # modprobe
+        self.cmd_and_check("modprobe trace-printk")
+        # lsmod
+        self.cmd_and_check("lsmod | grep trace_printk | cut -d\' \' -f1", "trace_printk")
+        # check result
+        self.cmd_and_check("cat /sys/kernel/debug/tracing/trace | grep trace_printk_irq_work | head -n1 | cut -d\':\' -f2", " trace_printk_irq_work")
+        # clean up trace
+        self.cmd_and_check("echo > /sys/kernel/debug/tracing/trace")
+        # rmmod
+        self.cmd_and_check("rmmod trace-printk")
+
+    # hw breakpoint
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_hw_breakpoint_example(self):
+        # check arch
+        status, output = self.target.run("uname -m")
+        result = ("x86" in output) or ("aarch64" in output)
+        if not result:
+            self.skipTest("the arch doesn't support hw breakpoint" % output)
+        # check config
+        self.check_config("CONFIG_KALLSYMS_ALL")
+        # make sure if module exists
+        self.check_module_exist("hw_breakpoint/", "data_breakpoint.ko")
+        # modprobe
+        self.cmd_and_check("modprobe data_breakpoint")
+        # lsmod
+        self.cmd_and_check("lsmod | grep data_breakpoint | cut -d\' \' -f1", "data_breakpoint")
+        # check result
+        self.cmd_and_check("cat /var/log/messages | grep sample_hbp_handler", "sample_hbp_handler")
+        # rmmod
+        self.cmd_and_check("rmmod data_breakpoint")
+
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_configfs_sample(self):
+        # check config
+        status, ret = self.target.run('zcat /proc/config.gz | grep CONFIG_CONFIGFS_FS')
+        if not ["CONFIG_CONFIGFS_FS=m" in ret or "CONFIG_CONFIGFS_FS=y" in ret]:
+            self.skipTest("CONFIG error")
+        # make sure if module exists
+        self.check_module_exist("configfs/", "configfs_sample.ko")
+        # modprobe
+        self.cmd_and_check("modprobe configfs_sample")
+        # lsmod
+        self.cmd_and_check("lsmod | grep configfs_sample | cut -d\' \' -f1 | head -n1", "configfs_sample")
+
+        status = 1
+        count = 0
+        while status != 0:
+            time.sleep(1)
+            status, ret = self.target.run('cat /sys/kernel/config/01-childless/description')
+            count = count + 1
+            if count > 200:
+                self.skipTest("Time out for check dir")
+
+        # rmmod
+        self.cmd_and_check("rmmod configfs_sample")
+
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_cn_test(self):
+        # make sure if module exists
+        self.check_module_exist("connector/", "cn_test.ko")
+        # modprobe
+        self.cmd_and_check("modprobe cn_test")
+        # lsmod
+        self.cmd_and_check("lsmod | grep cn_test | cut -d\' \' -f1", "cn_test")
+        # check result
+        self.cmd_and_check("cat /proc/net/connector | grep cn_test | head -n1 | cut -d\' \' -f1", "cn_test")
+        # rmmod
+        self.cmd_and_check("rmmod cn_test")
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/ldd.py b/external/poky/meta/lib/oeqa/runtime/cases/ldd.py
new file mode 100644
index 00000000..5bde1845
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/ldd.py
@@ -0,0 +1,24 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class LddTest(OERuntimeTestCase):
+
+    @OETestID(962)
+    @OEHasPackage(["ldd"])
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_ldd(self):
+        status, output = self.target.run('which ldd')
+        msg = 'ldd does not exist in PATH: which ldd: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        cmd = ('for i in $(which ldd | xargs cat | grep "^RTLDLIST"| '
+              'cut -d\'=\' -f2|tr -d \'"\'); '
+              'do test -f $i && echo $i && break; done')
+        status, output = self.target.run(cmd)
+        self.assertEqual(status, 0, msg="ldd path not correct or RTLDLIST files don't exist.")
+
+        status, output = self.target.run("ldd /bin/true")
+        self.assertEqual(status, 0, msg="ldd failed to execute: %s" % output)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/logrotate.py b/external/poky/meta/lib/oeqa/runtime/cases/logrotate.py
new file mode 100644
index 00000000..d2666444
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/logrotate.py
@@ -0,0 +1,46 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=289 testcase
+# Note that the image under test must have logrotate installed
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class LogrotateTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        cls.tc.target.run('cp /etc/logrotate.d/wtmp $HOME/wtmp.oeqabak')
+
+    @classmethod
+    def tearDownClass(cls):
+        cls.tc.target.run('mv -f $HOME/wtmp.oeqabak /etc/logrotate.d/wtmp && rm -rf $HOME/logrotate_dir')
+
+    @OETestID(1544)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['logrotate'])
+    def test_1_logrotate_setup(self):
+        status, output = self.target.run('mkdir $HOME/logrotate_dir')
+        msg = 'Could not create logrotate_dir. Output: %s' % output
+        self.assertEqual(status, 0, msg = msg)
+
+        cmd = ('sed -i "s#wtmp {#wtmp {\\n    olddir $HOME/logrotate_dir#"'
+               ' /etc/logrotate.d/wtmp')
+        status, output = self.target.run(cmd)
+        msg = ('Could not write to logrotate.d/wtmp file. Status and output: '
+               ' %s and %s' % (status, output))
+        self.assertEqual(status, 0, msg = msg)
+
+    @OETestID(1542)
+    @OETestDepends(['logrotate.LogrotateTest.test_1_logrotate_setup'])
+    def test_2_logrotate(self):
+        status, output = self.target.run('logrotate -f /etc/logrotate.conf')
+        msg = ('logrotate service could not be reloaded. Status and output: '
+                '%s and %s' % (status, output))
+        self.assertEqual(status, 0, msg = msg)
+
+        _, output = self.target.run('ls -la $HOME/logrotate_dir/ | wc -l')
+        msg = ('new logfile could not be created. List of files within log '
+               'directory: %s' % (
+                self.target.run('ls -la $HOME/logrotate_dir')[1]))
+        self.assertTrue(int(output)>=3, msg = msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/multilib.py b/external/poky/meta/lib/oeqa/runtime/cases/multilib.py
new file mode 100644
index 00000000..89020386
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/multilib.py
@@ -0,0 +1,43 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotInDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class MultilibTest(OERuntimeTestCase):
+
+    def archtest(self, binary, arch):
+        """
+        Check that ``binary`` has the ELF class ``arch`` (e.g. ELF32/ELF64).
+        """
+
+        status, output = self.target.run('readelf -h %s' % binary)
+        self.assertEqual(status, 0, 'Failed to readelf %s' % binary)
+
+        l = [l.split()[1] for l in output.split('\n') if "Class:" in l]
+        if l:
+            theclass = l[0]
+        else:
+            self.fail('Cannot parse readelf. Output:\n%s' % output)
+
+        msg = "%s isn't %s (is %s)" % (binary, arch, theclass)
+        self.assertEqual(theclass, arch, msg=msg)
+
+    @OETestID(1593)
+    @skipIfNotInDataVar('MULTILIBS', 'multilib:lib32',
+                        "This isn't a multilib:lib32 image")
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['binutils'])
+    @OEHasPackage(['lib32-libc6'])
+    def test_check_multilib_libc(self):
+        """
+        Check that a multilib image has both 32-bit and 64-bit libc in.
+        """
+        self.archtest("/lib/libc.so.6", "ELF32")
+        self.archtest("/lib64/libc.so.6", "ELF64")
+
+    @OETestID(279)
+    @OETestDepends(['multilib.MultilibTest.test_check_multilib_libc'])
+    @OEHasPackage(['lib32-connman', '!connman'])
+    def test_file_connman(self):
+        self.archtest("/usr/sbin/connmand", "ELF32")
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/oe_syslog.py b/external/poky/meta/lib/oeqa/runtime/cases/oe_syslog.py
new file mode 100644
index 00000000..a92a1f2b
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/oe_syslog.py
@@ -0,0 +1,68 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class SyslogTest(OERuntimeTestCase):
+
+    @OETestID(201)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(["busybox-syslog", "sysklogd", "rsyslog", "syslog-ng"])
+    def test_syslog_running(self):
+        status, output = self.target.run(self.tc.target_cmds['ps'])
+        msg = "Failed to execute %s" % self.tc.target_cmds['ps']
+        self.assertEqual(status, 0, msg=msg)
+        msg = "No syslog daemon process; %s output:\n%s" % (self.tc.target_cmds['ps'], output)
+        hasdaemon = "syslogd" in output or "syslog-ng" in output
+        self.assertTrue(hasdaemon, msg=msg)
+
+class SyslogTestConfig(OERuntimeTestCase):
+
+    @OETestID(1149)
+    @OETestDepends(['oe_syslog.SyslogTest.test_syslog_running'])
+    def test_syslog_logger(self):
+        status, output = self.target.run('logger foobar')
+        msg = "Can't log into syslog. Output: %s " % output
+        self.assertEqual(status, 0, msg=msg)
+
+        status, output = self.target.run('grep foobar /var/log/messages')
+        if status != 0:
+            if self.tc.td.get("VIRTUAL-RUNTIME_init_manager") == "systemd":
+                status, output = self.target.run('journalctl -o cat | grep foobar')
+            else:
+                status, output = self.target.run('logread | grep foobar')
+        msg = ('Test log string not found in /var/log/messages or logread.'
+               ' Output: %s ' % output)
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(1150)
+    @OETestDepends(['oe_syslog.SyslogTest.test_syslog_running'])
+    def test_syslog_restart(self):
+        if "systemd" != self.tc.td.get("VIRTUAL-RUNTIME_init_manager", ""):
+            (_, _) = self.target.run('/etc/init.d/syslog restart')
+        else:
+            (_, _) = self.target.run('systemctl restart syslog.service')
+
+
+    @OETestID(202)
+    @OETestDepends(['oe_syslog.SyslogTestConfig.test_syslog_logger'])
+    @OEHasPackage(["busybox-syslog"])
+    @skipIfDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+                   'Not appropiate for systemd image')
+    def test_syslog_startup_config(self):
+        cmd = 'echo "LOGFILE=/var/log/test" >> /etc/syslog-startup.conf'
+        self.target.run(cmd)
+        status, output = self.target.run('/etc/init.d/syslog restart')
+        msg = ('Could not restart syslog service. Status and output:'
+               ' %s and %s' % (status,output))
+        self.assertEqual(status, 0, msg)
+
+        cmd = 'logger foobar && grep foobar /var/log/test'
+        status,output = self.target.run(cmd)
+        msg = 'Test log string not found. Output: %s ' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        cmd = "sed -i 's#LOGFILE=/var/log/test##' /etc/syslog-startup.conf"
+        self.target.run(cmd)
+        self.target.run('/etc/init.d/syslog restart')
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/opkg.py b/external/poky/meta/lib/oeqa/runtime/cases/opkg.py
new file mode 100644
index 00000000..693f5d68
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/opkg.py
@@ -0,0 +1,50 @@
+import os
+from oeqa.utils.httpserver import HTTPService
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.data import skipIfNotDataVar, skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class OpkgTest(OERuntimeTestCase):
+
+    def pkg(self, command, expected = 0):
+        command = 'opkg %s' % command
+        status, output = self.target.run(command, 1500)
+        message = os.linesep.join([command, output])
+        self.assertEqual(status, expected, message)
+        return output
+
+class OpkgRepoTest(OpkgTest):
+
+    @classmethod
+    def setUp(cls):
+        allarchfeed = 'all'
+        if cls.tc.td["MULTILIB_VARIANTS"]:
+            allarchfeed = cls.tc.td["TUNE_PKGARCH"]
+        service_repo = os.path.join(cls.tc.td['DEPLOY_DIR_IPK'], allarchfeed)
+        cls.repo_server = HTTPService(service_repo, cls.tc.target.server_ip, logger=cls.tc.logger)
+        cls.repo_server.start()
+
+    @classmethod
+    def tearDown(cls):
+        cls.repo_server.stop()
+
+    def setup_source_config_for_package_install(self):
+        apt_get_source_server = 'http://%s:%s/' % (self.tc.target.server_ip, self.repo_server.port)
+        apt_get_sourceslist_dir = '/etc/opkg/'
+        self.target.run('cd %s; echo src/gz all %s >> opkg.conf' % (apt_get_sourceslist_dir, apt_get_source_server))
+        
+    def cleanup_source_config_for_package_install(self):
+        apt_get_sourceslist_dir = '/etc/opkg/'
+        self.target.run('cd %s; sed -i "/^src/d" opkg.conf' % (apt_get_sourceslist_dir))
+        
+    @skipIfNotFeature('package-management',
+                      'Test requires package-management to be in IMAGE_FEATURES')
+    @skipIfNotDataVar('IMAGE_PKGTYPE', 'ipk',
+                      'IPK is not the primary package manager')
+    @OEHasPackage(['opkg'])
+    def test_opkg_install_from_repo(self):
+        self.setup_source_config_for_package_install()
+        self.pkg('update')
+        self.pkg('remove run-postinsts-dev')
+        self.pkg('install run-postinsts-dev')
+        self.cleanup_source_config_for_package_install()
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/pam.py b/external/poky/meta/lib/oeqa/runtime/cases/pam.py
new file mode 100644
index 00000000..3654cdc9
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/pam.py
@@ -0,0 +1,33 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=287 testcase
+# Note that the image under test must have "pam" in DISTRO_FEATURES
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class PamBasicTest(OERuntimeTestCase):
+
+    @OETestID(1543)
+    @skipIfNotFeature('pam', 'Test requires pam to be in DISTRO_FEATURES')
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_pam(self):
+        status, output = self.target.run('login --help')
+        msg = ('login command does not work as expected. '
+               'Status and output:%s and %s' % (status, output))
+        self.assertEqual(status, 1, msg = msg)
+
+        status, output = self.target.run('passwd --help')
+        msg = ('passwd command does not work as expected. '
+               'Status and output:%s and %s' % (status, output))
+        self.assertEqual(status, 0, msg = msg)
+
+        status, output = self.target.run('su --help')
+        msg = ('su command does not work as expected. '
+               'Status and output:%s and %s' % (status, output))
+        self.assertEqual(status, 0, msg = msg)
+
+        status, output = self.target.run('useradd --help')
+        msg = ('useradd command does not work as expected. '
+               'Status and output:%s and %s' % (status, output))
+        self.assertEqual(status, 0, msg = msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/parselogs.py b/external/poky/meta/lib/oeqa/runtime/cases/parselogs.py
new file mode 100644
index 00000000..f6e9820c
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/parselogs.py
@@ -0,0 +1,353 @@
+import os
+
+from subprocess import check_output
+from shutil import rmtree
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+#in the future these lists could be moved outside of module
+errors = ["error", "cannot", "can\'t", "failed"]
+
+common_errors = [
+    "(WW) warning, (EE) error, (NI) not implemented, (??) unknown.",
+    "dma timeout",
+    "can\'t add hid device:",
+    "usbhid: probe of ",
+    "_OSC failed (AE_ERROR)",
+    "_OSC failed (AE_SUPPORT)",
+    "AE_ALREADY_EXISTS",
+    "ACPI _OSC request failed (AE_SUPPORT)",
+    "can\'t disable ASPM",
+    "Failed to load module \"vesa\"",
+    "Failed to load module vesa",
+    "Failed to load module \"modesetting\"",
+    "Failed to load module modesetting",
+    "Failed to load module \"glx\"",
+    "Failed to load module \"fbdev\"",
+    "Failed to load module fbdev",
+    "Failed to load module glx",
+    "[drm] Cannot find any crtc or sizes - going 1024x768",
+    "_OSC failed (AE_NOT_FOUND); disabling ASPM",
+    "Open ACPI failed (/var/run/acpid.socket) (No such file or directory)",
+    "NX (Execute Disable) protection cannot be enabled: non-PAE kernel!",
+    "hd.: possibly failed opcode",
+    'NETLINK INITIALIZATION FAILED',
+    'kernel: Cannot find map file',
+    'omap_hwmod: debugss: _wait_target_disable failed',
+    'VGA arbiter: cannot open kernel arbiter, no multi-card support',
+    'Failed to find URL:http://ipv4.connman.net/online/status.html',
+    'Online check failed for',
+    'netlink init failed',
+    'Fast TSC calibration',
+    "BAR 0-9",
+    "Failed to load module \"ati\"",
+    "controller can't do DEVSLP, turning off",
+    "stmmac_dvr_probe: warning: cannot get CSR clock",
+    "error: couldn\'t mount because of unsupported optional features",
+    "GPT: Use GNU Parted to correct GPT errors",
+    "Cannot set xattr user.Librepo.DownloadInProgress",
+    "Failed to read /var/lib/nfs/statd/state: Success",
+    "error retry time-out =",
+    "logind: cannot setup systemd-logind helper (-61), using legacy fallback",
+    "Error changing net interface name 'eth0' to "
+    ]
+
+video_related = [
+    "uvesafb",
+]
+
+x86_common = [
+    '[drm:psb_do_init] *ERROR* Debug is',
+    'wrong ELF class',
+    'Could not enable PowerButton event',
+    'probe of LNXPWRBN:00 failed with error -22',
+    'pmd_set_huge: Cannot satisfy',
+    'failed to setup card detect gpio',
+    'amd_nb: Cannot enumerate AMD northbridges',
+    'failed to retrieve link info, disabling eDP',
+    'Direct firmware load for iwlwifi',
+] + common_errors
+
+qemux86_common = [
+    'wrong ELF class',
+    "fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.",
+    "can't claim BAR ",
+    'amd_nb: Cannot enumerate AMD northbridges',
+    'uvesafb: 5000 ms task timeout, infinitely waiting',
+    'tsc: HPET/PMTIMER calibration failed',
+] + common_errors
+
+ignore_errors = {
+    'default' : common_errors,
+    'qemux86' : [
+        'Failed to access perfctr msr (MSR',
+        'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+        ] + qemux86_common,
+    'qemux86-64' : qemux86_common,
+    'qemumips' : [
+        'Failed to load module "glx"',
+        'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+        'cacheinfo: Failed to find cpu0 device node',
+        ] + common_errors,
+    'qemumips64' : [
+        'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+        'cacheinfo: Failed to find cpu0 device node',
+         ] + common_errors,
+    'qemuppc' : [
+        'PCI 0000:00 Cannot reserve Legacy IO [io  0x0000-0x0fff]',
+        'host side 80-wire cable detection failed, limiting max speed',
+        'mode "640x480" test failed',
+        'Failed to load module "glx"',
+        'can\'t handle BAR above 4GB',
+        'Cannot reserve Legacy IO',
+        ] + common_errors,
+    'qemuarm' : [
+        'mmci-pl18x: probe of fpga:05 failed with error -22',
+        'mmci-pl18x: probe of fpga:0b failed with error -22',
+        'Failed to load module "glx"',
+        'OF: amba_device_add() failed (-19) for /amba/smc@10100000',
+        'OF: amba_device_add() failed (-19) for /amba/mpmc@10110000',
+        'OF: amba_device_add() failed (-19) for /amba/sctl@101e0000',
+        'OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000',
+        'OF: amba_device_add() failed (-19) for /amba/sci@101f0000',
+        'OF: amba_device_add() failed (-19) for /amba/ssp@101f4000',
+        'OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000',
+        'Failed to initialize \'/amba/timer@101e3000\': -22',
+        'jitterentropy: Initialization failed with host not compliant with requirements: 2',
+        ] + common_errors,
+    'qemuarm64' : [
+        'Fatal server error:',
+        '(EE) Server terminated with error (1). Closing log file.',
+        'dmi: Firmware registration failed.',
+        'irq: type mismatch, failed to map hwirq-27 for /intc',
+        ] + common_errors,
+    'intel-core2-32' : [
+        'ACPI: No _BQC method, cannot determine initial brightness',
+        '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness',
+        '(EE) Failed to load module "psb"',
+        '(EE) Failed to load module psb',
+        '(EE) Failed to load module "psbdrv"',
+        '(EE) Failed to load module psbdrv',
+        '(EE) open /dev/fb0: No such file or directory',
+        '(EE) AIGLX: reverting to software rendering',
+        'dmi: Firmware registration failed.',
+        'ioremap error for 0x78',
+        ] + x86_common,
+    'intel-corei7-64' : [
+        'can\'t set Max Payload Size to 256',
+        'intel_punit_ipc: can\'t request region for resource',
+        '[drm] parse error at position 4 in video mode \'efifb\'',
+        'ACPI Error: Could not enable RealTimeClock event',
+        'ACPI Warning: Could not enable fixed event - RealTimeClock',
+        'hci_intel INT33E1:00: Unable to retrieve gpio',
+        'hci_intel: probe of INT33E1:00 failed',
+        'can\'t derive routing for PCI INT A',
+        'failed to read out thermal zone',
+        'Bluetooth: hci0: Setting Intel event mask failed',
+        'ttyS2 - failed to request DMA',
+        'Bluetooth: hci0: Failed to send firmware data (-38)',
+        'atkbd serio0: Failed to enable keyboard on isa0060/serio0',
+        ] + x86_common,
+    'genericx86' : x86_common,
+    'genericx86-64' : [
+        'Direct firmware load for i915',
+        'Failed to load firmware i915',
+        'Failed to fetch GuC',
+        'Failed to initialize GuC',
+        'Failed to load DMC firmware',
+        'The driver is built-in, so to load the firmware you need to',
+        ] + x86_common,
+    'edgerouter' : [
+        'Fatal server error:',
+        ] + common_errors,
+}
+
+log_locations = ["/var/log/","/var/log/dmesg", "/tmp/dmesg_output.log"]
+
+class ParseLogsTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        cls.errors = errors
+
+        # When systemd is enabled we need to notice errors on
+        # circular dependencies in units.
+        if 'systemd' in cls.td.get('DISTRO_FEATURES', ''):
+            cls.errors.extend([
+                'Found ordering cycle on',
+                'Breaking ordering cycle by deleting job',
+                'deleted to break ordering cycle',
+                'Ordering cycle found, skipping',
+                ])
+
+        cls.ignore_errors = ignore_errors
+        cls.log_locations = log_locations
+        cls.msg = ''
+        is_lsb, _ = cls.tc.target.run("which LSB_Test.sh")
+        if is_lsb == 0:
+            for machine in cls.ignore_errors:
+                cls.ignore_errors[machine] = cls.ignore_errors[machine] \
+                                             + video_related
+
+    def getMachine(self):
+        return self.td.get('MACHINE', '')
+
+    def getWorkdir(self):
+        return self.td.get('WORKDIR', '')
+
+    # Get some information on the CPU of the machine to display at the
+    # beginning of the output. This info might be useful in some cases.
+    def getHardwareInfo(self):
+        hwi = ""
+        cmd = ('cat /proc/cpuinfo | grep "model name" | head -n1 | '
+               " awk 'BEGIN{FS=\":\"}{print $2}'")
+        _, cpu_name = self.target.run(cmd)
+
+        cmd = ('cat /proc/cpuinfo | grep "cpu cores" | head -n1 | '
+               "awk {'print $4'}")
+        _, cpu_physical_cores = self.target.run(cmd)
+
+        cmd = 'cat /proc/cpuinfo | grep "processor" | wc -l'
+        _, cpu_logical_cores = self.target.run(cmd)
+
+        _, cpu_arch = self.target.run('uname -m')
+
+        hwi += 'Machine information: \n'
+        hwi += '*******************************\n'
+        hwi += 'Machine name: ' + self.getMachine() + '\n'
+        hwi += 'CPU: ' + str(cpu_name) + '\n'
+        hwi += 'Arch: ' + str(cpu_arch)+ '\n'
+        hwi += 'Physical cores: ' + str(cpu_physical_cores) + '\n'
+        hwi += 'Logical cores: ' + str(cpu_logical_cores) + '\n'
+        hwi += '*******************************\n'
+
+        return hwi
+
+    # Go through the log locations provided and if it's a folder
+    # create a list with all the .log files in it, if it's a file
+    # just add it to that list.
+    def getLogList(self, log_locations):
+        logs = []
+        for location in log_locations:
+            status, _ = self.target.run('test -f ' + str(location))
+            if status == 0:
+                logs.append(str(location))
+            else:
+                status, _ = self.target.run('test -d ' + str(location))
+                if status == 0:
+                    cmd = 'find ' + str(location) + '/*.log -maxdepth 1 -type f'
+                    status, output = self.target.run(cmd)
+                    if status == 0:
+                        output = output.splitlines()
+                        for logfile in output:
+                            logs.append(os.path.join(location, str(logfile)))
+        return logs
+
+    # Copy the log files to be parsed locally
+    def transfer_logs(self, log_list):
+        workdir = self.getWorkdir()
+        self.target_logs = workdir + '/' + 'target_logs'
+        target_logs = self.target_logs
+        if os.path.exists(target_logs):
+            rmtree(self.target_logs)
+        os.makedirs(target_logs)
+        for f in log_list:
+            self.target.copyFrom(str(f), target_logs)
+
+    # Get the local list of logs
+    def get_local_log_list(self, log_locations):
+        self.transfer_logs(self.getLogList(log_locations))
+        list_dir = os.listdir(self.target_logs)
+        dir_files = [os.path.join(self.target_logs, f) for f in list_dir]
+        logs = [f for f in dir_files if os.path.isfile(f)]
+        return logs
+
+    # Build the grep command to be used with filters and exclusions
+    def build_grepcmd(self, errors, ignore_errors, log):
+        grepcmd = 'grep '
+        grepcmd += '-Ei "'
+        for error in errors:
+            grepcmd += error + '|'
+        grepcmd = grepcmd[:-1]
+        grepcmd += '" ' + str(log) + " | grep -Eiv \'"
+
+        try:
+            errorlist = ignore_errors[self.getMachine()]
+        except KeyError:
+            self.msg += 'No ignore list found for this machine, using default\n'
+            errorlist = ignore_errors['default']
+
+        for ignore_error in errorlist:
+            ignore_error = ignore_error.replace('(', '\(')
+            ignore_error = ignore_error.replace(')', '\)')
+            ignore_error = ignore_error.replace("'", '.')
+            ignore_error = ignore_error.replace('?', '\?')
+            ignore_error = ignore_error.replace('[', '\[')
+            ignore_error = ignore_error.replace(']', '\]')
+            ignore_error = ignore_error.replace('*', '\*')
+            ignore_error = ignore_error.replace('0-9', '[0-9]')
+            grepcmd += ignore_error + '|'
+        grepcmd = grepcmd[:-1]
+        grepcmd += "\'"
+
+        return grepcmd
+
+    # Grep only the errors so that their context could be collected.
+    # Default context is 10 lines before and after the error itself
+    def parse_logs(self, errors, ignore_errors, logs,
+                   lines_before = 10, lines_after = 10):
+        results = {}
+        rez = []
+        grep_output = ''
+
+        for log in logs:
+            result = None
+            thegrep = self.build_grepcmd(errors, ignore_errors, log)
+
+            try:
+                result = check_output(thegrep, shell=True).decode('utf-8')
+            except:
+                pass
+
+            if result is not None:
+                results[log] = {}
+                rez = result.splitlines()
+
+                for xrez in rez:
+                    try:
+                        cmd = ['grep', '-F', xrez, '-B', str(lines_before)]
+                        cmd += ['-A', str(lines_after), log]
+                        grep_output = check_output(cmd).decode('utf-8')
+                    except:
+                        pass
+                    results[log][xrez]=grep_output
+
+        return results
+
+    # Get the output of dmesg and write it in a file.
+    # This file is added to log_locations.
+    def write_dmesg(self):
+        (status, dmesg) = self.target.run('dmesg > /tmp/dmesg_output.log')
+
+    @OETestID(1059)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_parselogs(self):
+        self.write_dmesg()
+        log_list = self.get_local_log_list(self.log_locations)
+        result = self.parse_logs(self.errors, self.ignore_errors, log_list)
+        print(self.getHardwareInfo())
+        errcount = 0
+        for log in result:
+            self.msg += 'Log: ' + log + '\n'
+            self.msg += '-----------------------\n'
+            for error in result[log]:
+                errcount += 1
+                self.msg += 'Central error: ' + str(error) + '\n'
+                self.msg +=  '***********************\n'
+                self.msg +=  result[str(log)][str(error)] + '\n'
+                self.msg +=  '***********************\n'
+        self.msg += '%s errors found in logs.' % errcount
+        self.assertEqual(errcount, 0, msg=self.msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/perl.py b/external/poky/meta/lib/oeqa/runtime/cases/perl.py
new file mode 100644
index 00000000..be3287f2
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/perl.py
@@ -0,0 +1,15 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class PerlTest(OERuntimeTestCase):
+    @OETestID(208)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['perl'])
+    def test_perl_works(self):
+        status, output = self.target.run("perl -e '$_=\"Uryyb, jbeyq\"; tr/a-zA-Z/n-za-mN-ZA-M/;print'")
+        self.assertEqual(status, 0)
+        self.assertEqual(output, "Hello, world")
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/ping.py b/external/poky/meta/lib/oeqa/runtime/cases/ping.py
new file mode 100644
index 00000000..02f580ab
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/ping.py
@@ -0,0 +1,24 @@
+from subprocess import Popen, PIPE
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.oetimeout import OETimeout
+
+class PingTest(OERuntimeTestCase):
+
+    @OETimeout(30)
+    @OETestID(964)
+    def test_ping(self):
+        output = ''
+        count = 0
+        while count < 5:
+            cmd = 'ping -c 1 %s' % self.target.ip
+            proc = Popen(cmd, shell=True, stdout=PIPE)
+            output += proc.communicate()[0].decode('utf-8')
+            if proc.poll() == 0:
+                count += 1
+            else:
+                count = 0
+        msg = ('Expected 5 consecutive, got %d.\n'
+               'ping output is:\n%s' % (count,output))
+        self.assertEqual(count, 5, msg = msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/ptest.py b/external/poky/meta/lib/oeqa/runtime/cases/ptest.py
new file mode 100644
index 00000000..2a28ca59
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/ptest.py
@@ -0,0 +1,82 @@
+import unittest
+import pprint
+import datetime
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+from oeqa.utils.logparser import PtestParser
+
+class PtestRunnerTest(OERuntimeTestCase):
+
+    @OETestID(1600)
+    @skipIfNotFeature('ptest', 'Test requires ptest to be in DISTRO_FEATURES')
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['ptest-runner'])
+    @unittest.expectedFailure
+    def test_ptestrunner(self):
+        status, output = self.target.run('which ptest-runner', 0)
+        if status != 0:
+            self.skipTest("No -ptest packages are installed in the image")
+
+        test_log_dir = self.td.get('TEST_LOG_DIR', '')
+        # The TEST_LOG_DIR maybe NULL when testimage is added after
+        # testdata.json is generated.
+        if not test_log_dir:
+            test_log_dir = os.path.join(self.td.get('WORKDIR', ''), 'testimage')
+        # Don't use self.td.get('DATETIME'), it's from testdata.json, not
+        # up-to-date, and may cause "File exists" when re-reun.
+        timestamp = datetime.datetime.now().strftime('%Y%m%d%H%M%S')
+        ptest_log_dir_link = os.path.join(test_log_dir, 'ptest_log')
+        ptest_log_dir = '%s.%s' % (ptest_log_dir_link, timestamp)
+        ptest_runner_log = os.path.join(ptest_log_dir, 'ptest-runner.log')
+
+        status, output = self.target.run('ptest-runner', 0)
+        os.makedirs(ptest_log_dir)
+        with open(ptest_runner_log, 'w') as f:
+            f.write(output)
+
+        # status != 0 is OK since some ptest tests may fail
+        self.assertTrue(status != 127, msg="Cannot execute ptest-runner!")
+
+        if not hasattr(self.tc, "extraresults"):
+            self.tc.extraresults = {}
+        extras = self.tc.extraresults
+        extras['ptestresult.rawlogs'] = {'log': output}
+
+        # Parse and save results
+        parser = PtestParser()
+        results, sections = parser.parse(ptest_runner_log)
+        parser.results_as_files(ptest_log_dir)
+        if os.path.exists(ptest_log_dir_link):
+            # Remove the old link to create a new one
+            os.remove(ptest_log_dir_link)
+        os.symlink(os.path.basename(ptest_log_dir), ptest_log_dir_link)
+
+        extras['ptestresult.sections'] = sections
+
+        trans = str.maketrans("()", "__")
+        for section in results:
+            for test in results[section]:
+                result = results[section][test]
+                testname = "ptestresult." + (section or "No-section") + "." + "_".join(test.translate(trans).split())
+                extras[testname] = {'status': result}
+
+        failed_tests = {}
+        for section in results:
+            failed_testcases = [ "_".join(test.translate(trans).split()) for test in results[section] if results[section][test] == 'fail' ]
+            if failed_testcases:
+                failed_tests[section] = failed_testcases
+
+        failmsg = ""
+        status, output = self.target.run('dmesg | grep "Killed process"', 0)
+        if output:
+            failmsg = "ERROR: Processes were killed by the OOM Killer:\n%s\n" % output
+
+        if failed_tests:
+            failmsg = failmsg + "Failed ptests:\n%s" % pprint.pformat(failed_tests)
+
+        if failmsg:
+            self.fail(failmsg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/python.py b/external/poky/meta/lib/oeqa/runtime/cases/python.py
new file mode 100644
index 00000000..66ab4d25
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/python.py
@@ -0,0 +1,17 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class PythonTest(OERuntimeTestCase):
+    @OETestID(965)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['python3-core'])
+    def test_python3(self):
+        cmd = "python3 -c \"import codecs; print(codecs.encode('Uryyb, jbeyq', 'rot13'))\""
+        status, output = self.target.run(cmd)
+        msg = 'Exit status was not 0. Output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        msg = 'Incorrect output: %s' % output
+        self.assertEqual(output, "Hello, world", msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/rpm.py b/external/poky/meta/lib/oeqa/runtime/cases/rpm.py
new file mode 100644
index 00000000..de92157c
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/rpm.py
@@ -0,0 +1,140 @@
+import os
+import fnmatch
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+from oeqa.core.utils.path import findFile
+
+class RpmBasicTest(OERuntimeTestCase):
+
+    @OETestID(960)
+    @OEHasPackage(['rpm'])
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_rpm_help(self):
+        status, output = self.target.run('rpm --help')
+        msg = 'status and output: %s and %s' % (status, output)
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(191)
+    @OETestDepends(['rpm.RpmBasicTest.test_rpm_help'])
+    def test_rpm_query(self):
+        status, output = self.target.run('ls /var/lib/rpm/')
+        if status != 0:
+            self.skipTest('No /var/lib/rpm on target')
+        status, output = self.target.run('rpm -q rpm')
+        msg = 'status and output: %s and %s' % (status, output)
+        self.assertEqual(status, 0, msg=msg)
+
+class RpmInstallRemoveTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        pkgarch = cls.td['TUNE_PKGARCH'].replace('-', '_')
+        rpmdir = os.path.join(cls.tc.td['DEPLOY_DIR'], 'rpm', pkgarch)
+        # Pick base-passwd-doc as a test file to get installed, because it's small
+        # and it will always be built for standard targets
+        rpm_doc = 'base-passwd-doc-*.%s.rpm' % pkgarch
+        if not os.path.exists(rpmdir):
+            return
+        for f in fnmatch.filter(os.listdir(rpmdir), rpm_doc):
+            cls.test_file = os.path.join(rpmdir, f)
+        cls.dst = '/tmp/base-passwd-doc.rpm'
+
+    @OETestID(192)
+    @OETestDepends(['rpm.RpmBasicTest.test_rpm_query'])
+    def test_rpm_install(self):
+        self.tc.target.copyTo(self.test_file, self.dst)
+        status, output = self.target.run('rpm -ivh /tmp/base-passwd-doc.rpm')
+        msg = 'Failed to install base-passwd-doc package: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+        self.tc.target.run('rm -f %s' % self.dst)
+
+    @OETestID(194)
+    @OETestDepends(['rpm.RpmInstallRemoveTest.test_rpm_install'])
+    def test_rpm_remove(self):
+        status,output = self.target.run('rpm -e base-passwd-doc')
+        msg = 'Failed to remove base-passwd-doc package: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(1096)
+    @OETestDepends(['rpm.RpmBasicTest.test_rpm_query'])
+    def test_rpm_query_nonroot(self):
+
+        def set_up_test_user(u):
+            status, output = self.target.run('id -u %s' % u)
+            if status:
+                status, output = self.target.run('useradd %s' % u)
+                msg = 'Failed to create new user: %s' % output
+                self.assertTrue(status == 0, msg=msg)
+
+        def exec_as_test_user(u):
+            status, output = self.target.run('su -c id %s' % u)
+            msg = 'Failed to execute as new user'
+            self.assertTrue("({0})".format(u) in output, msg=msg)
+
+            status, output = self.target.run('su -c "rpm -qa" %s ' % u)
+            msg = 'status: %s. Cannot run rpm -qa: %s' % (status, output)
+            self.assertEqual(status, 0, msg=msg)
+
+        def unset_up_test_user(u):
+            status, output = self.target.run('userdel -r %s' % u)
+            msg = 'Failed to erase user: %s' % output
+            self.assertTrue(status == 0, msg=msg)
+
+        tuser = 'test1'
+
+        try:
+            set_up_test_user(tuser)
+            exec_as_test_user(tuser)
+        finally:
+            unset_up_test_user(tuser)
+
+    @OETestID(195)
+    @OETestDepends(['rpm.RpmInstallRemoveTest.test_rpm_remove'])
+    def test_check_rpm_install_removal_log_file_size(self):
+        """
+        Summary:     Check that rpm writes into /var/log/messages
+        Expected:    There should be some RPM prefixed entries in the above file.
+        Product:     BSPs
+        Author:      Alexandru Georgescu <alexandru.c.georgescu@intel.com>
+        Author:      Alexander Kanavin <alex.kanavin@gmail.com>
+        AutomatedBy: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
+        """
+        db_files_cmd = 'ls /var/lib/rpm/__db.*'
+        check_log_cmd = "grep RPM /var/log/messages | wc -l"
+
+        # Make sure that some database files are under /var/lib/rpm as '__db.xxx'
+        status, output = self.target.run(db_files_cmd)
+        msg =  'Failed to find database files under /var/lib/rpm/ as __db.xxx'
+        self.assertEqual(0, status, msg=msg)
+
+        self.tc.target.copyTo(self.test_file, self.dst)
+
+        # Remove the package just in case
+        self.target.run('rpm -e base-passwd-doc')
+
+        # Install/Remove a package 10 times
+        for i in range(10):
+            status, output = self.target.run('rpm -ivh /tmp/base-passwd-doc.rpm')
+            msg = 'Failed to install base-passwd-doc package. Reason: {}'.format(output)
+            self.assertEqual(0, status, msg=msg)
+
+            status, output = self.target.run('rpm -e base-passwd-doc')
+            msg = 'Failed to remove base-passwd-doc package. Reason: {}'.format(output)
+            self.assertEqual(0, status, msg=msg)
+
+        self.tc.target.run('rm -f %s' % self.dst)
+
+        # if using systemd this should ensure all entries are flushed to /var
+        status, output = self.target.run("journalctl --sync")
+        # Get the amount of entries in the log file
+        status, output = self.target.run(check_log_cmd)
+        msg = 'Failed to get the final size of the log file.'
+        self.assertEqual(0, status, msg=msg)
+
+        # Check that there's enough of them
+        self.assertGreaterEqual(int(output), 80,
+                                   'Cound not find sufficient amount of rpm entries in /var/log/messages, found {} entries'.format(output))
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/scp.py b/external/poky/meta/lib/oeqa/runtime/cases/scp.py
new file mode 100644
index 00000000..8f895da9
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/scp.py
@@ -0,0 +1,35 @@
+import os
+from tempfile import mkstemp
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class ScpTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUpClass(cls):
+        cls.tmp_fd, cls.tmp_path = mkstemp()
+        with os.fdopen(cls.tmp_fd, 'w') as f:
+            f.seek(2 ** 22 -1)
+            f.write(os.linesep)
+
+    @classmethod
+    def tearDownClass(cls):
+        os.remove(cls.tmp_path)
+
+    @OETestID(220)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['openssh-scp', 'dropbear'])
+    def test_scp_file(self):
+        dst = '/tmp/test_scp_file'
+
+        (status, output) = self.target.copyTo(self.tmp_path, dst)
+        msg = 'File could not be copied. Output: %s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        (status, output) = self.target.run('ls -la %s' % dst)
+        self.assertEqual(status, 0, msg = 'SCP test failed')
+
+        self.target.run('rm %s' % dst)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/skeletoninit.py b/external/poky/meta/lib/oeqa/runtime/cases/skeletoninit.py
new file mode 100644
index 00000000..4fdcf033
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/skeletoninit.py
@@ -0,0 +1,33 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=284
+# testcase. Image under test must have meta-skeleton layer in bblayers and
+# IMAGE_INSTALL_append = " service" in local.conf
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class SkeletonBasicTest(OERuntimeTestCase):
+
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['service'])
+    @skipIfDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+                   'Not appropiate for systemd image')
+    def test_skeleton_availability(self):
+        status, output = self.target.run('ls /etc/init.d/skeleton')
+        msg = 'skeleton init script not found. Output:\n%s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+        status, output =  self.target.run('ls /usr/sbin/skeleton-test')
+        msg = 'skeleton-test not found. Output:\n%s' % output
+        self.assertEqual(status, 0, msg=msg)
+
+    @OETestID(284)
+    @OETestDepends(['skeletoninit.SkeletonBasicTest.test_skeleton_availability'])
+    def test_skeleton_script(self):
+        output1 = self.target.run("/etc/init.d/skeleton start")[1]
+        cmd = '%s | grep [s]keleton-test' % self.tc.target_cmds['ps']
+        status, output2 = self.target.run(cmd)
+        msg = ('Skeleton script could not be started:'
+               '\n%s\n%s' % (output1, output2))
+        self.assertEqual(status, 0, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/ssh.py b/external/poky/meta/lib/oeqa/runtime/cases/ssh.py
new file mode 100644
index 00000000..0b1ea7bc
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/ssh.py
@@ -0,0 +1,17 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class SSHTest(OERuntimeTestCase):
+
+    @OETestID(224)
+    @OETestDepends(['ping.PingTest.test_ping'])
+    @OEHasPackage(['dropbear', 'openssh-sshd'])
+    def test_ssh(self):
+        (status, output) = self.target.run('uname -a')
+        self.assertEqual(status, 0, msg='SSH Test failed: %s' % output)
+        (status, output) = self.target.run('cat /etc/masterimage')
+        msg = "This isn't the right image  - /etc/masterimage " \
+              "shouldn't be here %s" % output
+        self.assertEqual(status, 1, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/stap.py b/external/poky/meta/lib/oeqa/runtime/cases/stap.py
new file mode 100644
index 00000000..c492caff
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/stap.py
@@ -0,0 +1,35 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class StapTest(OERuntimeTestCase):
+
+    @classmethod
+    def setUp(cls):
+        src = os.path.join(cls.tc.runtime_files_dir, 'hello.stp')
+        dst = '/tmp/hello.stp'
+        cls.tc.target.copyTo(src, dst)
+
+    @classmethod
+    def tearDown(cls):
+        files = '/tmp/hello.stp'
+        cls.tc.target.run('rm %s' % files)
+
+    @OETestID(1652)
+    @skipIfNotFeature('tools-profile',
+                      'Test requires tools-profile to be in IMAGE_FEATURES')
+    @OETestDepends(['kernelmodule.KernelModuleTest.test_kernel_module'])
+    @OEHasPackage(['systemtap'])
+    def test_stap(self):
+        cmds = [
+            'cd /usr/src/kernel && make scripts prepare',
+            'cd /lib/modules/`uname -r` && (if [ ! -e build ]; then ln -s /usr/src/kernel build; fi)',
+            'stap --disable-cache -DSTP_NO_VERREL_CHECK /tmp/hello.stp'
+            ]
+        for cmd in cmds:
+            status, output = self.target.run(cmd, 900)
+            self.assertEqual(status, 0, msg='\n'.join([cmd, output]))
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/systemd.py b/external/poky/meta/lib/oeqa/runtime/cases/systemd.py
new file mode 100644
index 00000000..460b8fc3
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/systemd.py
@@ -0,0 +1,181 @@
+import re
+import time
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar, skipIfNotDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class SystemdTest(OERuntimeTestCase):
+
+    def systemctl(self, action='', target='', expected=0, verbose=False):
+        command = 'SYSTEMD_BUS_TIMEOUT=240s systemctl %s %s' % (action, target)
+        status, output = self.target.run(command)
+        message = '\n'.join([command, output])
+        if status != expected and verbose:
+            cmd = 'SYSTEMD_BUS_TIMEOUT=240s systemctl status --full %s' % target
+            message += self.target.run(cmd)[1]
+        self.assertEqual(status, expected, message)
+        return output
+
+    #TODO: use pyjournalctl instead
+    def journalctl(self, args='',l_match_units=None):
+        """
+        Request for the journalctl output to the current target system
+
+        Arguments:
+        -args, an optional argument pass through argument
+        -l_match_units, an optional list of units to filter the output
+        Returns:
+        -string output of the journalctl command
+        Raises:
+        -AssertionError, on remote commands that fail
+        -ValueError, on a journalctl call with filtering by l_match_units that
+        returned no entries
+        """
+
+        query_units=''
+        if l_match_units:
+            query_units = ['_SYSTEMD_UNIT='+unit for unit in l_match_units]
+            query_units = ' '.join(query_units)
+        command = 'journalctl %s %s' %(args, query_units)
+        status, output = self.target.run(command)
+        if status:
+            raise AssertionError("Command '%s' returned non-zero exit "
+                    'code %d:\n%s' % (command, status, output))
+        if len(output) == 1 and "-- No entries --" in output:
+            raise ValueError('List of units to match: %s, returned no entries'
+                    % l_match_units)
+        return output
+
+class SystemdBasicTests(SystemdTest):
+
+    def settle(self):
+        """
+        Block until systemd has finished activating any units being activated,
+        or until two minutes has elapsed.
+
+        Returns a tuple, either (True, '') if all units have finished
+        activating, or (False, message string) if there are still units
+        activating (generally, failing units that restart).
+        """
+        endtime = time.time() + (60 * 2)
+        while True:
+            status, output = self.target.run('SYSTEMD_BUS_TIMEOUT=240s systemctl --state=activating')
+            if "0 loaded units listed" in output:
+                return (True, '')
+            if time.time() >= endtime:
+                return (False, output)
+            time.sleep(10)
+
+    @skipIfNotFeature('systemd',
+                      'Test requires systemd to be in DISTRO_FEATURES')
+    @skipIfNotDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+                      'systemd is not the init manager for this image')
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_systemd_basic(self):
+        self.systemctl('--version')
+
+    @OETestID(551)
+    @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+    def test_systemd_list(self):
+        self.systemctl('list-unit-files')
+
+    @OETestID(550)
+    @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+    def test_systemd_failed(self):
+        settled, output = self.settle()
+        msg = "Timed out waiting for systemd to settle:\n%s" % output
+        self.assertTrue(settled, msg=msg)
+
+        output = self.systemctl('list-units', '--failed')
+        match = re.search('0 loaded units listed', output)
+        if not match:
+            output += self.systemctl('status --full --failed')
+        self.assertTrue(match, msg='Some systemd units failed:\n%s' % output)
+
+
+class SystemdServiceTests(SystemdTest):
+
+    @OEHasPackage(['avahi-daemon'])
+    @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+    def test_systemd_status(self):
+        self.systemctl('status --full', 'avahi-daemon.service')
+
+    @OETestID(695)
+    @OETestDepends(['systemd.SystemdServiceTests.test_systemd_status'])
+    def test_systemd_stop_start(self):
+        self.systemctl('stop', 'avahi-daemon.service')
+        self.systemctl('is-active', 'avahi-daemon.service',
+                       expected=3, verbose=True)
+        self.systemctl('start','avahi-daemon.service')
+        self.systemctl('is-active', 'avahi-daemon.service', verbose=True)
+
+    @OETestID(696)
+    @OETestDepends(['systemd.SystemdServiceTests.test_systemd_status'])
+    def test_systemd_disable_enable(self):
+        self.systemctl('disable', 'avahi-daemon.service')
+        self.systemctl('is-enabled', 'avahi-daemon.service', expected=1)
+        self.systemctl('enable', 'avahi-daemon.service')
+        self.systemctl('is-enabled', 'avahi-daemon.service')
+
+class SystemdJournalTests(SystemdTest):
+
+    @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+    def test_systemd_journal(self):
+        status, output = self.target.run('journalctl')
+        self.assertEqual(status, 0, output)
+
+    @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+    def test_systemd_boot_time(self, systemd_TimeoutStartSec=90):
+        """
+        Get the target boot time from journalctl and log it
+
+        Arguments:
+        -systemd_TimeoutStartSec, an optional argument containing systemd's
+        unit start timeout to compare against
+        """
+
+        # The expression chain that uniquely identifies the time boot message.
+        expr_items=['Startup finished', 'kernel', 'userspace','\.$']
+        try:
+            output = self.journalctl(args='-o cat --reverse')
+        except AssertionError:
+            self.fail('Error occurred while calling journalctl')
+        if not len(output):
+            self.fail('Error, unable to get startup time from systemd journal')
+
+        # Check for the regular expression items that match the startup time.
+        for line in output.split('\n'):
+            check_match = ''.join(re.findall('.*'.join(expr_items), line))
+            if check_match:
+                break
+        # Put the startup time in the test log
+        if check_match:
+            self.tc.logger.info('%s' % check_match)
+        else:
+            self.skipTest('Error at obtaining the boot time from journalctl')
+        boot_time_sec = 0
+
+        # Get the numeric values from the string and convert them to seconds
+        # same data will be placed in list and string for manipulation.
+        l_boot_time = check_match.split(' ')[-2:]
+        s_boot_time = ' '.join(l_boot_time)
+        try:
+            # Obtain the minutes it took to boot.
+            if l_boot_time[0].endswith('min') and l_boot_time[0][0].isdigit():
+                boot_time_min = s_boot_time.split('min')[0]
+                # Convert to seconds and accumulate it.
+                boot_time_sec += int(boot_time_min) * 60
+            # Obtain the seconds it took to boot and accumulate.
+            boot_time_sec += float(l_boot_time[1].split('s')[0])
+        except ValueError:
+            self.skipTest('Error when parsing time from boot string')
+
+        # Assert the target boot time against systemd's unit start timeout.
+        if boot_time_sec > systemd_TimeoutStartSec:
+            msg = ("Target boot time %s exceeds systemd's TimeoutStartSec %s"
+                    % (boot_time_sec, systemd_TimeoutStartSec))
+            self.tc.logger.info(msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/x32lib.py b/external/poky/meta/lib/oeqa/runtime/cases/x32lib.py
new file mode 100644
index 00000000..8da0154e
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/x32lib.py
@@ -0,0 +1,19 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotInDataVar
+
+class X32libTest(OERuntimeTestCase):
+
+    @skipIfNotInDataVar('DEFAULTTUNE', 'x86-64-x32',
+                        'DEFAULTTUNE is not set to x86-64-x32')
+    @OETestID(281)
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    def test_x32_file(self):
+        cmd = 'readelf -h /bin/ls | grep Class | grep ELF32'
+        status1 = self.target.run(cmd)[0]
+        cmd = 'readelf -h /bin/ls | grep Machine | grep X86-64'
+        status2 = self.target.run(cmd)[0]
+        msg = ("/bin/ls isn't an X86-64 ELF32 binary. readelf says: %s" % 
+                self.target.run("readelf -h /bin/ls")[1])
+        self.assertTrue(status1 == 0 and status2 == 0, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/cases/xorg.py b/external/poky/meta/lib/oeqa/runtime/cases/xorg.py
new file mode 100644
index 00000000..82521c69
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/cases/xorg.py
@@ -0,0 +1,19 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class XorgTest(OERuntimeTestCase):
+
+    @OETestID(1151)
+    @skipIfNotFeature('x11-base',
+                      'Test requires x11 to be in IMAGE_FEATURES')
+    @OETestDepends(['ssh.SSHTest.test_ssh'])
+    @OEHasPackage(['xserver-nodm-init'])
+    def test_xorg_running(self):
+        cmd ='%s | grep -v xinit | grep [X]org' % self.tc.target_cmds['ps']
+        status, output = self.target.run(cmd)
+        msg = ('Xorg does not appear to be running %s' %
+              self.target.run(self.tc.target_cmds['ps'])[1])
+        self.assertEqual(status, 0, msg=msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/context.py b/external/poky/meta/lib/oeqa/runtime/context.py
new file mode 100644
index 00000000..db0482d6
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/context.py
@@ -0,0 +1,217 @@
+# Copyright (C) 2016 Intel Corporation
+# Released under the MIT license (see COPYING.MIT)
+
+import os
+
+from oeqa.core.context import OETestContext, OETestContextExecutor
+from oeqa.core.target.ssh import OESSHTarget
+from oeqa.core.target.qemu import OEQemuTarget
+from oeqa.utils.dump import HostDumper
+
+from oeqa.runtime.loader import OERuntimeTestLoader
+
+class OERuntimeTestContext(OETestContext):
+    loaderClass = OERuntimeTestLoader
+    runtime_files_dir = os.path.join(
+                        os.path.dirname(os.path.abspath(__file__)), "files")
+
+    def __init__(self, td, logger, target,
+                 host_dumper, image_packages, extract_dir):
+        super(OERuntimeTestContext, self).__init__(td, logger)
+
+        self.target = target
+        self.image_packages = image_packages
+        self.host_dumper = host_dumper
+        self.extract_dir = extract_dir
+        self._set_target_cmds()
+
+    def _set_target_cmds(self):
+        self.target_cmds = {}
+
+        self.target_cmds['ps'] = 'ps'
+        if 'procps' in self.image_packages:
+            self.target_cmds['ps'] = self.target_cmds['ps'] + ' -ef'
+
+class OERuntimeTestContextExecutor(OETestContextExecutor):
+    _context_class = OERuntimeTestContext
+
+    name = 'runtime'
+    help = 'runtime test component'
+    description = 'executes runtime tests over targets'
+
+    default_cases = os.path.join(os.path.abspath(os.path.dirname(__file__)),
+            'cases')
+    default_data = None
+    default_test_data = 'data/testdata.json'
+    default_tests = ''
+
+    default_target_type = 'simpleremote'
+    default_manifest = 'data/manifest'
+    default_server_ip = '192.168.7.1'
+    default_target_ip = '192.168.7.2'
+    default_extract_dir = 'packages/extracted'
+
+    def register_commands(self, logger, subparsers):
+        super(OERuntimeTestContextExecutor, self).register_commands(logger, subparsers)
+
+        runtime_group = self.parser.add_argument_group('runtime options')
+
+        runtime_group.add_argument('--target-type', action='store',
+                default=self.default_target_type, choices=['simpleremote', 'qemu'],
+                help="Target type of device under test, default: %s" \
+                % self.default_target_type)
+        runtime_group.add_argument('--target-ip', action='store',
+                default=self.default_target_ip,
+                help="IP address of device under test, default: %s" \
+                % self.default_target_ip)
+        runtime_group.add_argument('--server-ip', action='store',
+                default=self.default_target_ip,
+                help="IP address of device under test, default: %s" \
+                % self.default_server_ip)
+
+        runtime_group.add_argument('--host-dumper-dir', action='store',
+                help="Directory where host status is dumped, if tests fails")
+
+        runtime_group.add_argument('--packages-manifest', action='store',
+                default=self.default_manifest,
+                help="Package manifest of the image under testi, default: %s" \
+                % self.default_manifest)
+
+        runtime_group.add_argument('--extract-dir', action='store',
+                default=self.default_extract_dir,
+                help='Directory where extracted packages reside, default: %s' \
+                % self.default_extract_dir)
+
+        runtime_group.add_argument('--qemu-boot', action='store',
+                help="Qemu boot configuration, only needed when target_type is QEMU.")
+
+    @staticmethod
+    def getTarget(target_type, logger, target_ip, server_ip, **kwargs):
+        target = None
+
+        if target_ip:
+            target_ip_port = target_ip.split(':')
+            if len(target_ip_port) == 2:
+                target_ip = target_ip_port[0]
+                kwargs['port'] = target_ip_port[1]
+
+        if target_type == 'simpleremote':
+            target = OESSHTarget(logger, target_ip, server_ip, **kwargs)
+        elif target_type == 'qemu':
+            target = OEQemuTarget(logger, server_ip, **kwargs)
+        else:
+            # XXX: This code uses the old naming convention for controllers and
+            # targets, the idea it is to leave just targets as the controller
+            # most of the time was just a wrapper.
+            # XXX: This code tries to import modules from lib/oeqa/controllers
+            # directory and treat them as controllers, it will less error prone
+            # to use introspection to load such modules.
+            # XXX: Don't base your targets on this code it will be refactored
+            # in the near future.
+            # Custom target module loading
+            target_modules_path = kwargs.get('target_modules_path', '')
+            controller = OERuntimeTestContextExecutor.getControllerModule(target_type, target_modules_path)
+            target = controller(logger, target_ip, server_ip, **kwargs)
+
+        return target
+
+    # Search oeqa.controllers module directory for and return a controller
+    # corresponding to the given target name.
+    # AttributeError raised if not found.
+    # ImportError raised if a provided module can not be imported.
+    @staticmethod
+    def getControllerModule(target, target_modules_path):
+        controllerslist = OERuntimeTestContextExecutor._getControllerModulenames(target_modules_path)
+        controller = OERuntimeTestContextExecutor._loadControllerFromName(target, controllerslist)
+        return controller
+
+    # Return a list of all python modules in lib/oeqa/controllers for each
+    # layer in bbpath
+    @staticmethod
+    def _getControllerModulenames(target_modules_path):
+
+        controllerslist = []
+
+        def add_controller_list(path):
+            if not os.path.exists(os.path.join(path, '__init__.py')):
+                raise OSError('Controllers directory %s exists but is missing __init__.py' % path)
+            files = sorted([f for f in os.listdir(path) if f.endswith('.py') and not f.startswith('_')])
+            for f in files:
+                module = 'oeqa.controllers.' + f[:-3]
+                if module not in controllerslist:
+                    controllerslist.append(module)
+                else:
+                    raise RuntimeError("Duplicate controller module found for %s. Layers should create unique controller module names" % module)
+
+        extpath = target_modules_path.split(':')
+        for p in extpath:
+            controllerpath = os.path.join(p, 'lib', 'oeqa', 'controllers')
+            if os.path.exists(controllerpath):
+                add_controller_list(controllerpath)
+        return controllerslist
+
+    # Search for and return a controller from given target name and
+    # set of module names.
+    # Raise AttributeError if not found.
+    # Raise ImportError if a provided module can not be imported
+    @staticmethod
+    def _loadControllerFromName(target, modulenames):
+        for name in modulenames:
+            obj = OERuntimeTestContextExecutor._loadControllerFromModule(target, name)
+            if obj:
+                return obj
+        raise AttributeError("Unable to load {0} from available modules: {1}".format(target, str(modulenames)))
+
+    # Search for and return a controller or None from given module name
+    @staticmethod
+    def _loadControllerFromModule(target, modulename):
+        obj = None
+        # import module, allowing it to raise import exception
+        module = __import__(modulename, globals(), locals(), [target])
+        # look for target class in the module, catching any exceptions as it
+        # is valid that a module may not have the target class.
+        try:
+            obj = getattr(module, target)
+        except:
+            obj = None
+        return obj
+        
+    @staticmethod
+    def readPackagesManifest(manifest):
+        if not manifest or not os.path.exists(manifest):
+            raise OSError("Manifest file not exists: %s" % manifest)
+
+        image_packages = set()
+        with open(manifest, 'r') as f:
+            for line in f.readlines():
+                line = line.strip()
+                if line and not line.startswith("#"):
+                    image_packages.add(line.split()[0])
+
+        return image_packages
+
+    @staticmethod
+    def getHostDumper(cmds, directory):
+        return HostDumper(cmds, directory)
+
+    def _process_args(self, logger, args):
+        if not args.packages_manifest:
+            raise TypeError('Manifest file not provided')
+
+        super(OERuntimeTestContextExecutor, self)._process_args(logger, args)
+
+        target_kwargs = {}
+        target_kwargs['qemuboot'] = args.qemu_boot
+
+        self.tc_kwargs['init']['target'] = \
+                OERuntimeTestContextExecutor.getTarget(args.target_type,
+                        None, args.target_ip, args.server_ip, **target_kwargs)
+        self.tc_kwargs['init']['host_dumper'] = \
+                OERuntimeTestContextExecutor.getHostDumper(None,
+                        args.host_dumper_dir)
+        self.tc_kwargs['init']['image_packages'] = \
+                OERuntimeTestContextExecutor.readPackagesManifest(
+                        args.packages_manifest)
+        self.tc_kwargs['init']['extract_dir'] = args.extract_dir
+
+_executor_class = OERuntimeTestContextExecutor
diff --git a/external/poky/meta/lib/oeqa/runtime/decorator/package.py b/external/poky/meta/lib/oeqa/runtime/decorator/package.py
new file mode 100644
index 00000000..aa6ecb68
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/decorator/package.py
@@ -0,0 +1,53 @@
+# Copyright (C) 2016 Intel Corporation
+# Released under the MIT license (see COPYING.MIT)
+
+from oeqa.core.decorator import OETestDecorator, registerDecorator
+from oeqa.core.utils.misc import strToSet
+
+@registerDecorator
+class OEHasPackage(OETestDecorator):
+    """
+        Checks if image has packages (un)installed.
+
+        The argument must be a string, set, or list of packages that must be
+        installed or not present in the image.
+
+        The way to tell a package must not be in an image is using an
+        exclamation point ('!') before the name of the package.
+
+        If test depends on pkg1 or pkg2 you need to use:
+        @OEHasPackage({'pkg1', 'pkg2'})
+
+        If test depends on pkg1 and pkg2 you need to use:
+        @OEHasPackage('pkg1')
+        @OEHasPackage('pkg2')
+
+        If test depends on pkg1 but pkg2 must not be present use:
+        @OEHasPackage({'pkg1', '!pkg2'})
+    """
+
+    attrs = ('need_pkgs',)
+
+    def setUpDecorator(self):
+        need_pkgs = set()
+        unneed_pkgs = set()
+        pkgs = strToSet(self.need_pkgs)
+        for pkg in pkgs:
+            if pkg.startswith('!'):
+                unneed_pkgs.add(pkg[1:])
+            else:
+                need_pkgs.add(pkg)
+
+        if unneed_pkgs:
+            msg = 'Checking if %s is not installed' % ', '.join(unneed_pkgs)
+            self.logger.debug(msg)
+            if not self.case.tc.image_packages.isdisjoint(unneed_pkgs):
+                msg = "Test can't run with %s installed" % ', or'.join(unneed_pkgs)
+                self.case.skipTest(msg)
+
+        if need_pkgs:
+            msg = 'Checking if at least one of %s is installed' % ', '.join(need_pkgs)
+            self.logger.debug(msg)
+            if self.case.tc.image_packages.isdisjoint(need_pkgs):
+                msg = "Test requires %s to be installed" % ', or'.join(need_pkgs)
+                self.case.skipTest(msg)
diff --git a/external/poky/meta/lib/oeqa/runtime/files/hello.stp b/external/poky/meta/lib/oeqa/runtime/files/hello.stp
new file mode 100644
index 00000000..36771471
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/files/hello.stp
@@ -0,0 +1 @@
+probe oneshot { println("hello world") }
diff --git a/external/poky/meta/lib/oeqa/runtime/files/hellomod.c b/external/poky/meta/lib/oeqa/runtime/files/hellomod.c
new file mode 100644
index 00000000..a383397e
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/files/hellomod.c
@@ -0,0 +1,19 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+static int __init hello_init(void)
+{
+        printk(KERN_INFO "Hello world!\n");
+        return 0;
+}
+
+static void __exit hello_cleanup(void)
+{
+        printk(KERN_INFO "Cleaning up hellomod.\n");
+}
+
+module_init(hello_init);
+module_exit(hello_cleanup);
+
+MODULE_LICENSE("GPL");
diff --git a/external/poky/meta/lib/oeqa/runtime/files/hellomod_makefile b/external/poky/meta/lib/oeqa/runtime/files/hellomod_makefile
new file mode 100644
index 00000000..b92d5c8f
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/files/hellomod_makefile
@@ -0,0 +1,8 @@
+obj-m := hellomod.o
+KDIR := /usr/src/kernel
+
+all:
+	$(MAKE) -C $(KDIR) M=$(PWD) modules
+
+clean:
+	$(MAKE) -C $(KDIR) M=$(PWD) clean
diff --git a/external/poky/meta/lib/oeqa/runtime/files/testmakefile b/external/poky/meta/lib/oeqa/runtime/files/testmakefile
new file mode 100644
index 00000000..ca1844e9
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/files/testmakefile
@@ -0,0 +1,5 @@
+test: test.o
+	gcc -o test test.o -lm
+test.o: test.c
+	gcc -c test.c
+
diff --git a/external/poky/meta/lib/oeqa/runtime/loader.py b/external/poky/meta/lib/oeqa/runtime/loader.py
new file mode 100644
index 00000000..041ef976
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/loader.py
@@ -0,0 +1,16 @@
+# Copyright (C) 2016 Intel Corporation
+# Released under the MIT license (see COPYING.MIT)
+
+from oeqa.core.loader import OETestLoader
+from oeqa.runtime.case import OERuntimeTestCase
+
+class OERuntimeTestLoader(OETestLoader):
+    caseClass = OERuntimeTestCase
+
+    def _getTestCase(self, testCaseClass, tcName):
+        case = super(OERuntimeTestLoader, self)._getTestCase(testCaseClass, tcName)
+
+        # Adds custom attributes to the OERuntimeTestCase
+        setattr(case, 'target', self.tc.target)
+
+        return case
diff --git a/external/poky/meta/lib/oeqa/runtime/utils/__init__.py b/external/poky/meta/lib/oeqa/runtime/utils/__init__.py
new file mode 100644
index 00000000..e69de29b
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/utils/__init__.py
diff --git a/external/poky/meta/lib/oeqa/runtime/utils/targetbuildproject.py b/external/poky/meta/lib/oeqa/runtime/utils/targetbuildproject.py
new file mode 100644
index 00000000..5af55d73
--- /dev/null
+++ b/external/poky/meta/lib/oeqa/runtime/utils/targetbuildproject.py
@@ -0,0 +1,39 @@
+# Copyright (C) 2016 Intel Corporation
+# Released under the MIT license (see COPYING.MIT)
+
+from oeqa.utils.buildproject import BuildProject
+
+class TargetBuildProject(BuildProject):
+
+    def __init__(self, target, uri, foldername=None, dl_dir=None):
+        self.target = target
+        self.targetdir = "~/"
+        BuildProject.__init__(self, uri, foldername, dl_dir=dl_dir)
+
+    def download_archive(self):
+        self._download_archive()
+
+        status, output = self.target.copyTo(self.localarchive, self.targetdir)
+        if status:
+            raise Exception('Failed to copy archive to target, '
+                            'output: %s' % output)
+
+        cmd = 'tar xf %s%s -C %s' % (self.targetdir,
+                                     self.archive,
+                                     self.targetdir)
+        status, output = self.target.run(cmd)
+        if status:
+            raise Exception('Failed to extract archive, '
+                            'output: %s' % output)
+
+        # Change targetdir to project folder
+        self.targetdir = self.targetdir + self.fname
+
+    # The timeout parameter of target.run is set to 0
+    # to make the ssh command run with no timeout.
+    def _run(self, cmd):
+        ret = self.target.run(cmd, 0)
+        msg = "Command %s failed with exit code %s: %s" % (cmd, ret[0], ret[1])
+        if ret[0] != 0:
+            raise Exception(msg)
+        return ret[0]