vs-positioningbaselibrary branch

1 files changed, 207 insertions, 0 deletions

diff --git a/positioning_base_library/library/src/_pbProcMng.cpp b/positioning_base_library/library/src/_pbProcMng.cpp
new file mode 100644
index 00000000..df4c02e4
--- /dev/null
+++ b/positioning_base_library/library/src/_pbProcMng.cpp
@@ -0,0 +1,207 @@
+/*
+ * @copyright Copyright (c) 2016-2019 TOYOTA MOTOR CORPORATION.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ File name      : _pbProcMng.cpp
+ System name    :
+ Subsystem name :
+ Title          :
+* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+#include <fcntl.h>
+#include <sys/procfs.h>
+#include <vehicle_service/positioning_base_library.h>
+#include "WPF_STD_private.h"
+#include "_pbInternalProc.h"
+#include "_pbWaitforsingleobject.h"
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : ExitProcess
+ * ABSTRACT  : Terminate one process and all threads belonging to that process.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : VOID defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+VOID ExitProcess(UINT u_exit_code) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    exit(u_exit_code);
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetCurrentProcess
+ * ABSTRACT  : Get a pseudo handle for the current process.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : HANDLE defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/* QAC 3460 */
+HANDLE GetCurrentProcess(void) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return reinterpret_cast<HANDLE>(getpid());
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetCurrentProcessId
+ * ABSTRACT  : Get the process identifier of the calling process.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : DWORD defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/* QAC 3460 */
+DWORD GetCurrentProcessId(void) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return (DWORD)getpid();
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : _pb_ExitThread
+ * ABSTRACT  : Terminate a thread
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : VOID defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+VOID _pb_ExitThread(DWORD dw_exit_code) {   // LCOV_EXCL_START 8:dead code  // NOLINT(whitespace/line_length)  // NOLINT(readability/nolint)  WPF_SYSAPI.h API
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    /* Delete handle type */
+    WaitObjectDel(reinterpret_cast<HANDLE*>(pthread_self()));
+
+    return pthread_exit (reinterpret_cast<void*>(dw_exit_code));
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : TerminateThread
+ * ABSTRACT  : Terminate a thread
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : BOOL defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+BOOL TerminateThread(HANDLE h_thread, DWORD dw_exit_code) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    int32    lret = EOK;
+    BOOL    bret = TRUE;
+
+    /* Delete handle type */
+    WaitObjectDel(h_thread);
+
+    /* When an error occurs */
+    if (lret == EOK) {
+        bret = FALSE;
+    }
+
+    return bret;
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetExitCodeThread
+ * ABSTRACT  : Get the exit status of the specified thread.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : BOOL defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+BOOL GetExitCodeThread(HANDLE h_thread, LPDWORD lp_exit_code) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return TRUE;
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : WaitExitThread
+ * ABSTRACT  : Wait for the thread to terminate.
+ * NOTE      : It can only be used for a thread in the same process according to PosixBasedOS001.
+ * ARGUMENT  :
+ * RETURN    : BOOL defined
+ *         RET_NORMAL        : Normal completion
+ *         RET_ERROR        : ABEND
+ *         RET_ERRTIMEOUT    : Timeout occurred
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+RET_API WaitExitThread(HANDLE h_handle, u_int32 ul_mill_seconds, u_int32* pul_exit_code) {  // LCOV_EXCL_START 8:dead code  // NOLINT(whitespace/line_length)
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return RET_NORMAL;    /* Coverity CID: 18759 compliant */
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetCurrentThread
+ * ABSTRACT  : Get a pseudo handle for the current thread.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : HANDLE defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/* QAC 3460 */
+HANDLE GetCurrentThread(void) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return (HANDLE)pthread_self();
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetCurrentThreadId
+ * ABSTRACT  : Get the thread identifier of the calling thread.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : DWORD defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+/* QAC 3460 */
+DWORD GetCurrentThreadId(void) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return (DWORD)pthread_self();
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : GetThreadTimes
+ * ABSTRACT  : Get time information about the specified thread.
+ * NOTE      :
+ * ARGUMENT  :
+ * RETURN    : BOOL defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+BOOL GetThreadTimes(HANDLE h_process, HANDLE h_thread, LPFILETIME lp_creation_time, LPFILETIME lp_exit_time, LPFILETIME lp_kernel_time, LPFILETIME lp_user_time) {  // LCOV_EXCL_START 8:dead code  // NOLINT(whitespace/line_length)
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return TRUE;    /* Coverity CID: 18765 compliant */
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : ResumeThread
+ * ABSTRACT  : Decrease the thread suspend count by 1.
+ * NOTE      : Always return 0 because no suspend operation is supported according to PosixBasedOS001.
+ * ARGUMENT  :
+ * RETURN    : DWORD defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+DWORD ResumeThread(HANDLE h_thread) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return 0;
+}
+// LCOV_EXCL_STOP
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * MODULE    : SuspendThread
+ * ABSTRACT  : Suspend execution of the specified thread.
+ * NOTE      : Always return 0 because no suspend operation is supported according to PosixBasedOS001.
+ * ARGUMENT  :
+ * RETURN    : DWORD defined
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+DWORD SuspendThread(HANDLE h_thread) {  // LCOV_EXCL_START 8:dead code
+    AGL_ASSERT_NOT_TESTED();  // LCOV_EXCL_LINE 200: test assert
+    return 0;
+}
+// LCOV_EXCL_STOP
+