diff options
Diffstat (limited to 'bsp/meta-boundary/conf/machine')
-rw-r--r-- | bsp/meta-boundary/conf/machine/imx6-acl.conf | 52 | ||||
-rw-r--r-- | bsp/meta-boundary/conf/machine/nitrogen8mm.conf | 46 |
2 files changed, 0 insertions, 98 deletions
diff --git a/bsp/meta-boundary/conf/machine/imx6-acl.conf b/bsp/meta-boundary/conf/machine/imx6-acl.conf deleted file mode 100644 index a1a32a3d..00000000 --- a/bsp/meta-boundary/conf/machine/imx6-acl.conf +++ /dev/null @@ -1,52 +0,0 @@ -#@TYPE: Machine -#@NAME: Boundary Devices ACL -#@SOC: i.MX6 Q/DL -#@DESCRIPTION: Machine configuration for Boundary Devices ACL -#@MAINTAINER: Gary Bisson <gary.bisson@boundarydevices.com> -# -# By default, this machine will build for the standard Solo, 512M -# option. To build U-Boot for other CPU or memory combinations, -# you can set the UBOOT_MACHINE variable in your local.conf -# according to the following table: -# -# Processor Memory Configuration -# -------------- ------ -------------------- -# i.MX6Quad 2GB acl_q2g_defconfig -# i.MX6Solo 512MB acl_s512m_defconfig -# - -MACHINEOVERRIDES =. "mx6:mx6dl:mx6q:" - -include conf/machine/include/imx-base.inc -include conf/machine/include/tune-cortexa9.inc - -KERNEL_DEVICETREE = "imx6dl-acl.dtb \ - imx6q-acl.dtb \ -" -KERNEL_IMAGETYPE = "zImage" - -PREFERRED_PROVIDER_u-boot = "u-boot-boundary" -PREFERRED_PROVIDER_virtual/kernel ?= "linux-boundary" - -# Use SPI NOR U-Boot by default -IMAGE_BOOTLOADER ?= "" - -IMAGE_FSTYPES = "sdcard.gz" - -# Shorten boot volume ID (FAT limitation) -BOOTDD_VOLUME_ID = "Boot" - -# Ensure boot scripts will be available at rootfs time -do_rootfs[depends] += "u-boot-script-boundary:do_deploy" - -# Boot scripts to install -BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript" - -UBOOT_MACHINE ?= "acl_512m_defconfig" - -SERIAL_CONSOLE = "115200 ttymxc1" - -MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-gslx680 \ - libiio libiio-iiod libiio-tests \ - libmdi2300 libmdi2300-examples \ - printer-tools kernel-iio " diff --git a/bsp/meta-boundary/conf/machine/nitrogen8mm.conf b/bsp/meta-boundary/conf/machine/nitrogen8mm.conf deleted file mode 100644 index c8003a3d..00000000 --- a/bsp/meta-boundary/conf/machine/nitrogen8mm.conf +++ /dev/null @@ -1,46 +0,0 @@ -#@TYPE: Machine -#@NAME: Boundary Devices Nitrogen8M -#@SOC: i.MX8 MQ -#@DESCRIPTION: Machine configuration for Boundary Devices Nitrogen8M -#@MAINTAINER: Chris Dimich <chris.dimich@boundarydevices.com> - -MACHINEOVERRIDES =. "mx8:mx8mm:mx8m:mx8mq:" - -require conf/machine/include/imx-base.inc -require conf/machine/include/arm/arch-arm64.inc - -# Kernel configuration -PREFERRED_PROVIDER_virtual/kernel ??= "linux-boundary" -PREFERRED_VERSION_linux-boundary = "4.14%" -KERNEL_DEVICETREE = "freescale/imx8mq-nitrogen8m.dtb \ - freescale/imx8mq-nitrogen8m-m4.dtb \ - freescale/imx8mm-nitrogen8mm.dtb \ - freescale/imx8mm-nitrogen8mm_som.dtb \ -" -KERNEL_IMAGETYPE = "Image" -KERNEL_DEFCONFIG = "boundary_defconfig" -RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "" - -# U-Boot configuration -PREFERRED_PROVIDER_u-boot ??= "u-boot-boundary" -PREFERRED_PROVIDER_virtual/bootloader ??= "u-boot-boundary" -SPL_BINARY = "spl/u-boot-spl.bin" -UBOOT_DTB_NAME ?= "imx8mm-nitrogen8mm.dtb" -UBOOT_MACHINE ?= "nitrogen8mm_2g_defconfig" -UBOOT_MAKE_TARGET = "" -UBOOT_SUFFIX = "bin" - -# wic support -WKS_FILE = "sdimage-bootpart.wks" -IMAGE_BOOT_FILES_append = " \ - boot.scr-${MACHINE};boot.scr \ -" -WKS_FILE_DEPENDS_mx8 += " \ - u-boot-script-boundary \ - e2fsprogs-native \ - bmap-tools-native \ -" - -SERIAL_CONSOLE ?= "115200 ttymxc0" - -MACHINE_FEATURES += " pci wifi bluetooth" |