diff options
Diffstat (limited to 'bsp/meta-freescale-3rdparty/recipes-kernel/linux/linux-compulab-3.14.28/0001-ARM-i.MX6-dts-Add-initial-support-for-cm-fx6.patch')
| -rw-r--r-- | bsp/meta-freescale-3rdparty/recipes-kernel/linux/linux-compulab-3.14.28/0001-ARM-i.MX6-dts-Add-initial-support-for-cm-fx6.patch | 399 |
1 files changed, 0 insertions, 399 deletions
diff --git a/bsp/meta-freescale-3rdparty/recipes-kernel/linux/linux-compulab-3.14.28/0001-ARM-i.MX6-dts-Add-initial-support-for-cm-fx6.patch b/bsp/meta-freescale-3rdparty/recipes-kernel/linux/linux-compulab-3.14.28/0001-ARM-i.MX6-dts-Add-initial-support-for-cm-fx6.patch deleted file mode 100644 index 1156b835..00000000 --- a/bsp/meta-freescale-3rdparty/recipes-kernel/linux/linux-compulab-3.14.28/0001-ARM-i.MX6-dts-Add-initial-support-for-cm-fx6.patch +++ /dev/null @@ -1,399 +0,0 @@ -From af4b4f2854d6223ba2f1235400f8e8dac660a6a2 Mon Sep 17 00:00:00 2001 -From: Valentin Raevsky <valentin@compulab.co.il> -Date: Thu, 15 May 2014 17:18:11 +0300 -Subject: [PATCH 01/59] ARM: i.MX6: dts: Add initial support for cm-fx6 - -Add initial support for cm-fx6 module. - -This patch configures: -1) serial console -2) hearbeat led -3) FreeScale NIC -4) pcie -5) Intel I210 NIC -6) wif/bt -7) sata - -Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> ---- - arch/arm/boot/dts/imx6q-cm-fx6.dts | 368 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 368 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts - -diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts -new file mode 100644 -index 0000000..1f06d95 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts -@@ -0,0 +1,368 @@ -+/* -+* Copyright 2013 CompuLab Ltd. -+* -+* Author: Valentin Raevsky <valentin@compulab.co.il> -+* -+* The code contained herein is licensed under the GNU General Public -+* License. You may obtain a copy of the GNU General Public License -+* Version 2 or later at the following locations: -+* -+* http://www.opensource.org/licenses/gpl-license.html -+* http://www.gnu.org/copyleft/gpl.html -+*/ -+ -+/dts-v1/; -+#include "imx6q.dtsi" -+ -+/ { -+ model = "CompuLab CM-FX6"; -+ compatible = "compulab,cm-fx6", "fsl,imx6q"; -+ -+ memory { -+ reg = <0x10000000 0x80000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ heartbeat-led { -+ label = "Heartbeat"; -+ gpios = <&gpio2 31 0>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* regulator for mmc */ -+ reg_3p3v: 3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ /* regulator for usb otg */ -+ reg_usb_otg_vbus: usb_otg_vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_otg_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 22 0>; -+ enable-active-high; -+ }; -+ -+ /* regulator for usb hub1 */ -+ reg_usb_h1_vbus: usb_h1_vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb_h1_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio7 8 0>; -+ enable-active-high; -+ }; -+ -+ /* regulator1 for wifi/bt */ -+ awnh387_npoweron: regulator-awnh387-npoweron { -+ compatible = "regulator-fixed"; -+ regulator-name = "regulator-awnh387-npoweron"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio7 12 0>; -+ enable-active-high; -+ }; -+ -+ /* regulator2 for wifi/bt */ -+ awnh387_wifi_nreset: regulator-awnh387-wifi-nreset { -+ compatible = "regulator-fixed"; -+ regulator-name = "regulator-awnh387-wifi-nreset"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio6 16 0>; -+ startup-delay-us = <10000>; -+ }; -+ }; -+}; -+ -+&iomuxc { -+ imx6q-cm-fx6 { -+ /* pins for eth0 */ -+ pinctrl_enet: enetgrp { -+ fsl,pins = < -+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 -+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 -+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 -+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 -+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 -+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 -+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 -+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 -+ >; -+ }; -+ -+ /* pins for spi */ -+ pinctrl_ecspi1: ecspi1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 -+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 -+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 -+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 -+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 -+ >; -+ }; -+ -+ /* pins for nand */ -+ pinctrl_gpmi_nand: gpminandgrp { -+ fsl,pins = < -+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 -+ >; -+ }; -+ -+ /* pins for i2c1 */ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ /* pins for i2c2 */ -+ pinctrl_i2c2: i2c2grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ /* pins for i2c3 */ -+ pinctrl_i2c3: i2c3grp { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ /* pins for console */ -+ pinctrl_uart4: uart4grp { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 -+ >; -+ }; -+ -+ /* pins for usb hub1 */ -+ pinctrl_usbh1: usbh1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000 -+ >; -+ }; -+ -+ /* pins for usb otg */ -+ pinctrl_usbotg: usbotggrp { -+ fsl,pins = < -+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 -+ >; -+ }; -+ -+ /* pins for wifi/bt */ -+ pinctrl_usdhc1: usdhc1grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 -+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 -+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 -+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 -+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 -+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 -+ >; -+ }; -+ -+ /* pins for mmc */ -+ pinctrl_usdhc3: usdhc3grp { -+ fsl,pins = < -+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 -+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 -+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 -+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 -+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 -+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 -+ >; -+ }; -+ }; -+}; -+ -+/* spi */ -+&ecspi1 { -+ fsl,spi-num-chipselects = <2>; -+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_ecspi1>; -+ status = "okay"; -+ -+ flash: m25p80@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "st,m25px16", "st,m25p"; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0 0xc0000>; -+ }; -+ -+ partition@c0000 { -+ label = "uboot environment"; -+ reg = <0xc0000 0x40000>; -+ }; -+ -+ partition@100000 { -+ label = "reserved"; -+ reg = <0x100000 0x100000>; -+ }; -+ }; -+}; -+ -+/* eth0 */ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+/* nand */ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand>; -+ status = "okay"; -+}; -+ -+/* i2c1 */ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+ -+ eeprom@50 { -+ compatible = "at24,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+ -+ rtc@56 { -+ compatible = "emmicro,em3027"; -+ reg = <0x56>; -+ }; -+}; -+ -+/* i2c2 */ -+&i2c2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c2>; -+ status = "okay"; -+}; -+ -+/* i2c3 */ -+&i2c3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c3>; -+ status = "okay"; -+ -+ eeprom@50 { -+ compatible = "at24,24c02"; -+ reg = <0x50>; -+ pagesize = <16>; -+ }; -+}; -+ -+/* eth1 */ -+&pcie { -+ reset-gpio = <&gpio1 26 0>; -+ status = "okay"; -+}; -+ -+/* sata */ -+&sata { -+ status = "okay"; -+}; -+ -+/* rear serial console */ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2_2>; -+ fsl,dte-mode; -+ fsl,uart-has-rtscts; -+ dma-names = "rx", "tx"; -+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; -+ status = "okay"; -+}; -+ -+/* console */ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart4>; -+ status = "okay"; -+}; -+ -+/* usb otg */ -+&usbotg { -+ vbus-supply = <®_usb_otg_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbotg>; -+ dr_mode = "otg"; -+ status = "okay"; -+}; -+ -+/* usb hub1 */ -+&usbh1 { -+ vbus-supply = <®_usb_h1_vbus>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usbh1>; -+ status = "okay"; -+}; -+ -+/* wifi/bt */ -+&usdhc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc1>; -+ non-removable; -+ vmmc-supply = <&awnh387_npoweron>; -+ vmmc_aux-supply = <&awnh387_wifi_nreset>; -+ status = "okay"; -+}; -+ -+/* mmc */ -+&usdhc3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc3>; -+ vmmc-supply = <®_3p3v>; -+ status = "okay"; -+}; --- -1.7.9.5 - |