diff options
Diffstat (limited to 'bsp/meta-raspberrypi/README.md')
| -rw-r--r-- | bsp/meta-raspberrypi/README.md | 30 |
1 files changed, 27 insertions, 3 deletions
diff --git a/bsp/meta-raspberrypi/README.md b/bsp/meta-raspberrypi/README.md index b49405b2..898426d8 100644 --- a/bsp/meta-raspberrypi/README.md +++ b/bsp/meta-raspberrypi/README.md @@ -5,7 +5,9 @@ Yocto BSP layer for the Raspberry Pi boards - <http://www.raspberrypi.org/>. [](https://yocto-ci.resin.io/job/meta-raspberrypi1) [](https://yocto-ci.resin.io/job/meta-raspberrypi2) [](https://yocto-ci.resin.io/job/meta-raspberrypi3) -[](https://gitter.im/agherzan/meta-raspberrypi) +[](https://yocto-ci.resin.io/job/meta-raspberrypi4) +[](https://meta-raspberrypi.readthedocs.io/en/latest/?badge=latest) +[](https://matrix.to/#/#meta-raspberrypi:cub.icu) ## Quick links @@ -48,8 +50,30 @@ This layer depends on: 2. Add this layer to bblayers.conf and the dependencies above 3. Set MACHINE in local.conf to one of the supported boards 4. bitbake core-image-base -5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used) -6. Boot your RPI. +5. Use bmaptool to copy the generated .wic.bz2 file to the SD card +6. Boot your RPI + +## Quick Start with kas + +1. Install kas build tool from PyPi (sudo pip3 install kas) +2. kas build meta-raspberrypi/kas-poky-rpi.yml +3. Use bmaptool to copy the generated .wic.bz2 file to the SD card +4. Boot your RPI + +To adjust the build configuration with specific options (I2C, SPI, ...), simply add +a section as follows: + +``` +local_conf_header: + rpi-specific: | + ENABLE_I2C = "1" + RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt" +``` + +To configure the machine, you have to update the `machine` variable. +And the same for the `distro`. + +For further information, you can read more at <https://kas.readthedocs.io/en/1.0/index.html> ## Maintainers |