1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
From c7c3ed47f1de7c20de348a6ca5fe0d5a18912f4b Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Mon, 23 Mar 2020 12:16:13 +0200
Subject: [PATCH 4/4] refactor a009531, a008851 and a011270
1. Add 'load conditional', 'jump condidional' and 'jump' to PBI
instructions.
2. Use SVR register to execute the PCIe workarounds on the relevant rev
of the device.
Upstream-Status: Inappropriate [Solid-Run BSP]
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
lx2160asi/a009531_a008851.rcw | 96 +++++++++++++++++++++++++++++++++++
lx2160asi/a011270.rcw | 6 +++
rcw.py | 28 ++++++++++
3 files changed, 130 insertions(+)
create mode 100644 lx2160asi/a009531_a008851.rcw
diff --git a/lx2160asi/a009531_a008851.rcw b/lx2160asi/a009531_a008851.rcw
new file mode 100644
index 0000000..0eb7051
--- /dev/null
+++ b/lx2160asi/a009531_a008851.rcw
@@ -0,0 +1,96 @@
+/*
+ * Work-around for erratum A-009531
+ *
+ * Description:
+ * As defined in section 2.2.6.4, Relaxed Ordering and ID-Based Ordering (IDO)
+ * Attributes of the PCI Express Base Specification Rev 3.1, “A Completer
+ * is permitted to set IDO only if the IDO Completion Enable bit in the Device
+ * Control 2 Register is set. It is not required to copy the value of IDO from
+ * the Request into the Completion(s) for that Request".
+ *
+ * However, the PCI Express controller as the completer sets the IDO bit in the
+ * completion packet header, in response to non-posted requests (memory read) with
+ * IDO bit set in the packet header, even if the IDO Completion Enable bit in the
+ * Device Control 2 Register is not set.
+ *
+ * Impact:
+ * The PCI Express controller as the completer sends completion packets with IDO
+ * bit set in packet header even when the IDO Completion Enable bit is cleared in
+ * the controller’s Device Control 2 Register.
+ * Applicable for SNP PCIe controller
+ */
+
+/*
+ * Work-around for erratum A-008851
+ *
+ * Invalid transmitter/receiver preset values are used in Gen3 equalization
+ * phases during link training for RC mode
+ * This errata is valid only for PCI gen3.
+ * Workaround:
+ * write 0x00000001 to MISC_CONTROL_1_OFF
+ * write 0x4747 to Lane Equalization Control register for each lane
+ * Applicable for SNP PCIe controller
+ */
+
+.pbi
+/* Load condition SVR register mask major ID */
+loadc 0x01e000a4,0x000000f0
+
+/* If it is rev 2, skip the following jump command */
+jumpc 0x00000014,0x00000020
+
+/* Jump all the below instructions */
+jump 0x190 /* All instruction below including the jump are 0x190 bytes */
+
+loadc 0x01ea1080,0x70000000
+jumpc 0x00000034,0x00000000
+write 0x03400098,0x00000000
+write 0x034008bc,0x00000001
+write 0x03400154,0x47474747
+write 0x03400158,0x47474747
+write 0x034008bc,0x00000000
+
+loadc 0x01ea1080,0x00700000
+jumpc 0x00000034,0x00000000
+write 0x03500098,0x00000000
+write 0x035008bc,0x00000001
+write 0x03500154,0x47474747
+write 0x03500158,0x47474747
+write 0x035008bc,0x00000000
+
+loadc 0x01eb1080,0x70000000
+jumpc 0x00000044,0x00000000
+write 0x03600098,0x00000000
+write 0x036008bc,0x00000001
+write 0x03600164,0x47474747
+write 0x03600168,0x47474747
+write 0x0360016c,0x47474747
+write 0x03600170,0x47474747
+write 0x036008bc,0x00000000
+
+loadc 0x01eb1080,0x00700000
+jumpc 0x00000034,0x00000000
+write 0x03700098,0x00000000
+write 0x037008bc,0x00000001
+write 0x03700154,0x47474747
+write 0x03700158,0x47474747
+write 0x037008bc,0x00000000
+
+loadc 0x01ec1080,0x70000000
+jumpc 0x00000044,0x00000000
+write 0x03800098,0x00000000
+write 0x038008bc,0x00000001
+write 0x03800164,0x47474747
+write 0x03800168,0x47474747
+write 0x0380016c,0x47474747
+write 0x03800170,0x47474747
+write 0x038008bc,0x00000000
+
+loadc 0x01ec1080,0x00700000
+jumpc 0x00000034,0x00000000
+write 0x03900098,0x00000000
+write 0x039008bc,0x00000001
+write 0x03900154,0x47474747
+write 0x03900158,0x47474747
+write 0x039008bc,0x00000000
+.end
diff --git a/lx2160asi/a011270.rcw b/lx2160asi/a011270.rcw
index 0dc774d..5bd5558 100644
--- a/lx2160asi/a011270.rcw
+++ b/lx2160asi/a011270.rcw
@@ -4,6 +4,12 @@
*/
.pbi
+/* Load condition SVR register mask major ID */
+loadc 0x01e000a4,0x000000f0
+/* If it is rev 1, skip the following jump command */
+jumpc 0x00000014,0x00000010
+/* Skip the following instructions by jumping to the end */
+jump 0x38
write 0x03400688,0x00000001
write 0x03500688,0x00000001
write 0x03600688,0x00000001
diff --git a/rcw.py b/rcw.py
index 863f755..c2d06f6 100755
--- a/rcw.py
+++ b/rcw.py
@@ -328,6 +328,34 @@ def build_pbi(lines):
v2 = struct.pack(endianess + 'L', p2)
subsection += v1
subsection += v2
+ elif op == 'loadc':
+ if p1 == None or p2 == None:
+ print('Error: "loadc" instruction requires two parameters')
+ return ''
+ v1 = struct.pack(endianess + 'L', 0x80140000)
+ v2 = struct.pack(endianess + 'L', p1)
+ v3 = struct.pack(endianess + 'L', p2)
+ subsection += v1
+ subsection += v2
+ subsection += v3
+ elif op == 'jumpc':
+ if p1 == None or p2 == None:
+ print('Error: "jumpc" instruction requires two parameters')
+ return ''
+ v1 = struct.pack(endianess + 'L', 0x80850000)
+ v2 = struct.pack(endianess + 'L', p1)
+ v3 = struct.pack(endianess + 'L', p2)
+ subsection += v1
+ subsection += v2
+ subsection += v3
+ elif op == 'jump':
+ if p1 == None:
+ print('Error: "jump" instruction requires a parameter')
+ return ''
+ v1 = struct.pack(endianess + 'L', 0x80840000)
+ v2 = struct.pack(endianess + 'L', p1)
+ subsection += v1
+ subsection += v2
elif op == 'awrite':
if p1 == None or p2 == None:
print('Error: "awrite" instruction requires two parameters')
--
2.17.1
|
