| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Move KVM demo configuration and image recipes to a new sub-layer,
meta-agl-kvm-demo, to keep things that may not be buildable with
just the agl-demo feature separate to avoid confusion. It will
hopefully also avoid clutter in recipes-platform/images.
This sub-layer is pulled in when the agl-kvm setup feature is
given to aglsetup.sh.
- Remove the agl-kvm-host-kuksa and agl-kvm-host-audio setup
features.
- Add new *-guest and *-guest-preconfigured flavors of the Flutter
IVI and IC images under meta-agl-kvm-demo that that have the
desired configuration changes baked in.
- Add required qemu-config recipe variants for the new guest image
flavors. At the moment there is more duplication of configuration
for this than is desired, and some reworking of agl-qemu-runner
configuration may come as a follow up to avoid this.
- Remove qemu-config recipe variants for unused Qt guest images.
If it becomes desirable to use the Qt demo images as guests this
can be revisited.
- Added agl-kvm-demo-flutter-preconfigured image variant that
supports the full demo setup (i.e. "green machine" with steering
wheel, equivalent to CES 2024 demos).
NOTES:
- The agl-kvm-demo image remains and builds roughly the same image
as before, with the KUKSA.val databroker running in the IVI guest
and cluster support enabled. Replacing this image with a bbclass
abstraction and an e.g. agl-kvm-demo-flutter image is under
consideration.
Bug-AGL: SPEC-5138
Change-Id: I64936208fd032e5ba47366e3a7ff572dc18338e4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29918
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Rename the demo images to align with the following scheme:
agl-<ivi|cluster|etc>-<image|demo>-<qt|flutter|etc>(-<crosssdk|preconfigured>)
The intent is to make the naming more consistent in preparation for
switching to preconfigured images as a replacement for the existing
agl-demo-preload, agl-demo-cluster-support, agl-kvm-host-* aglsetup.sh
features.
Additionally, the prototype LXC demo image support has been removed
as it is unused and would need updating for these and upcoming
changes.
Bug-AGL: SPEC-5138
Change-Id: I8d907713b09eb47c3cb0ebd5326ab063b2684ea2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29864
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Fix native-shell-client systemd unit to work with the changes
made for SPEC-4714 (separate agl-compositor systemd unit,
running as agl-driver).
- Update agl-qemu-runner.sh for the SPEC-4714 changes.
- Tweak cluster guest configuration to use just 2 cores and 1 GB
of memory to free up resources for the host.
- Add inverted psplash configuration that is pulled in for the
KVM demo image when building with agl-demo-preload. This
matches the inverted screen in the demo hardware.
Bug-AGL: SPEC-4974
Change-Id: Ie57a3550c8c8b12fd64ee14a9f1fbf4a4c40da32
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29460
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Changes:
- Tweak agl-qemu-runner to make CAN options configurable.
- Update the IVI guest image agl-qemu-runner configurations to
enable an emulated PCI CAN device mapped to the host can0.
- Update the IVI guest image agl-qemu-runner configurations to
change the input device to a USB passthrough corresponding to
the bottom USB 2.0 connector of the 2x stack on the reference
hardware, so that a USB touchscreen can be used for demos.
Bug-AGL: SPEC-4618
Change-Id: I6b690377f5fe0a481e283d7370cbb165478ee8eb
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 0eb0e7ad872bc03cbc8af5c95bfe0219ebf06bfd)
|
|
Changes:
- Tweak agl-qemu-runner to make network options configurable.
- Add qemu-config-vmnet0 recipe that installs the required
configuration files to set up a vmnet0 bridge device for QEMU to
add the guests to, and to run dnsmasq against it to provide set
IPs (in 172.16.10.0/8) to known MAC addresses that can be used to
get the IVI and IC guests at stable IP addresses.
- As part of the above, disable connman DNS proxying to avoid
conflicting with dnsmasq. This does mean this package should
only be used for simple host images where applications can live
with less dynamic DNS configuration behavior.
- Update the various guest configuration files for agl-qemu-runner
to set the new QEMU_NET_OPT variable as required.
Bug-AGL: SPEC-4618
Change-Id: I81d2ea9f0605a8bca7ac17d6e8f33c0b1a9f2c46
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 0219e6547b627f45936599fa54e02cad27dee4f4)
|
|
Add recipes for agl-qemu-runner.sh QEMU wrapper script and template
systemd unit, and guest per-image configuration files and systemd
unit links for the various demo platform images. The configurations
for the demo images can be mixed and matched somewhat, but only one
each of IVI and cluster should be used, as there are some static CPU
assignments in the configurations. As well, this has only been
tested on the AGL reference hardware at present, some rework will
likely be required to support other platforms.
There is room to add a bbclass to simplify the guest configuration
recipes, but that has not been done for now as this approach may be
temporary; a switch to libvirtd with appropriate configurations is
likely.
Bug-AGL: SPEC-4618
Change-Id: Ieefbd4081cca506f915957cc313411a5ed1ece5c
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
Scott Murray