diff options
Diffstat (limited to 'meta-agl-refhw-gen3')
3 files changed, 28 insertions, 41 deletions
diff --git a/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend b/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend index 4253d4f..84a0694 100644 --- a/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend +++ b/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend @@ -2,15 +2,20 @@ FILESEXTRAPATHS:prepend := "${THISDIR}/files:" SRC_URI:append:rcar-gen3 = " file://0001-rcar_gen3-plat-Do-not-panic-on-unrecognized-boards.patch" -# It is believed the eMMC configuration below makes the result AGL -# reference hardware specific, mark it as such when building with +# Since it is believed the eMMC configuration below makes the result +# AGL reference hardware specific, mark it as such when building with # MACHINE=agl-refhw-h3 to potentially flag this in an incorrectly # configured build. COMPATIBLE_MACHINE:agl-refhw-h3 = "agl-refhw-h3" # There are hardware issues in using hyperflash. arm-trusted-firmware, optee and -# u-boot have to be stored into eMMC by using serial donwload. -EMMC_BOOT_OPTION = "RCAR_SA6_TYPE=1" +# u-boot have to be stored into eMMC by using serial download. +# We need to specify it explicitly for the reference hardware configs when +# building with MACHINE=h3ulcb to not break the h3ulcb builds. +REFHW_ATFW_OPT_BOOTMODE = "RCAR_SA6_TYPE=1" + +# Use the existing bootmode flag with MACHINE=agl-refhw-h3 +USE_EMMC_BOOTMODE:agl-refh-h3 = "1" # RCAR_DRAM_MEMRANK must be set, since in case of RCAR_DRAM_LPDDR4_MEMCONF=1 # ddr_rank_judge is called. But for RCAR_DRAM_MEMRANK=0 it can determine values @@ -28,56 +33,35 @@ DDR_8G_OPTION = "RCAR_DRAM_LPDDR4_MEMCONF=1 RCAR_DRAM_MEMRANK=2" # and please flash the firmware built with the following options. DDR_8G_1RANK_OPTION = "RCAR_DRAM_LPDDR4_MEMCONF=1 RCAR_DRAM_MEMRANK=1" -ATFW_OPT:agl-refhw-h3 = "LSI=H3 RCAR_DRAM_SPLIT=1 ${EMMC_BOOT_OPTION} ${DDR_8G_OPTION}" - # -# Handle building as extra firmware with MACHINE=h3ulcb +# Build configurations for MACHINE=agl-refhw-h3, derived from salvator_x_r8a7795 # -# Build options for building as extra firmware when MACHINE=h3ulcb, based on H3[4x2g] -H3ULCB[agl-refhw-4x2g] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${EMMC_BOOT_OPTION} ${DDR_8G_OPTION}" -H3ULCB[agl-refhw-4x2g-1rank] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${EMMC_BOOT_OPTION} ${DDR_8G_1RANK_OPTION}" +agl_refhw_h3_r8a7795[4x2g] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY} ${ATFW_OPT_BOOTMODE} ${DDR_8G_OPTION}" +agl_refhw_h3_r8a7795[4x2g-1rank] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY} ${ATFW_OPT_BOOTMODE} ${DDR_8G_1RANK_OPTION}" -python __anonymous() { - # If building for MACHINE=agl-refhw-h3, the predefined default - # extra configurations in the base recipe are not interesting - # to us, as there is no compatible hardware. - if d.getVar("MACHINE") == "agl-refhw-h3": - d.delVarFlag("H3", "2x2g") - d.delVarFlag("H3", "4x2g") -} +# +# Extra configurations for building as extra firmware with MACHINE=h3ulcb +# -# Also build the extra 1rank firmware when MACHINE=agl-refhw-h3 -H3[4x2g-1rank] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${EMMC_BOOT_OPTION} ${DDR_8G_1RANK_OPTION}" +h3ulcb_r8a7795[agl-refhw-4x2g] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY} ${REFHW_ATFW_OPT_BOOTMODE} ${DDR_8G_OPTION}" +h3ulcb_r8a7795[agl-refhw-4x2g-1rank] = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY} ${REFHW_ATFW_OPT_BOOTMODE} ${DDR_8G_1RANK_OPTION}" # Boot Normal World in EL2: this define configures ATF (SPSR register) to boot # BL33 in EL2. EXTRA_OEMAKE += " RCAR_BL33_EXECUTION_EL=1" -# -# Need to prepend the compile tasks with a distclean that actually cleans -# out all the platform specific files like the new rcar_layout_tool output, -# otherwise they do not get rebuilt and board builds can get the wrong -# version of e.g. cert_headers_sa6. This needs to be addressed with -# upstream. -# - -do_compile:prepend() { - oe_runmake distclean PLAT=${PLATFORM} MBEDTLS_COMMON_MK=1 ${ATFW_OPT} -} - -do_ipl_opt_compile:prepend() { - oe_runmake distclean PLAT=${PLATFORM} MBEDTLS_COMMON_MK=1 ${ATFW_OPT} -} +# Hook to rename firmware files when building with MACHINE=h3ulcb +# to hopefully avoid confusion. -do_extra_ipl_opt_refhw_fixup() { +do_refhw_fixup() { # Rename agl-refhw-h3 firmware files to drop h3ulcb- - for f in ${DEPLOYDIR}/*-h3ulcb-agl-refhw-4x2g*; do + for f in ${S}/release/*-h3ulcb-agl-refhw-4x2g*; do n=`basename $f | sed 's/h3ulcb-//'` - mv -f $f ${DEPLOYDIR}/$n + mv -f $f ${S}/release/$n done } -EXTRA_IPL_OPT_POSTFUNCS = "" -EXTRA_IPL_OPT_POSTFUNCS_h3ulcb = "do_extra_ipl_opt_refhw_fixup" -do_extra_ipl_opt[postfuncs] += "${EXTRA_IPL_OPT_POSTFUNCS}" +DO_COMPILE_POSTFUNCS = "" +DO_COMPILE_POSTFUNCS:h3ulcb = "do_refhw_fixup" +do_compile[postfuncs] += "${DO_COMPILE_POSTFUNCS}" diff --git a/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config/gstvspfilter-agl-refhw-h3_r8a7795.conf b/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config/gstvspfilter-agl-refhw-h3_r8a7795.conf new file mode 100644 index 0000000..586b13b --- /dev/null +++ b/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config/gstvspfilter-agl-refhw-h3_r8a7795.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video20 +output-device-name=/dev/video21 diff --git a/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config_%.bbappend b/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config_%.bbappend new file mode 100644 index 0000000..9accc57 --- /dev/null +++ b/meta-agl-refhw-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter-config_%.bbappend @@ -0,0 +1 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:" |