meta-agl-bsp: Add reference hardware GPS support

Add recipe for gpsd configuration for the reference hardware, which
also installs a script plus systemd unit drop-in to handle enabling
and disabling it.  The latter is required due to the reference
hardware's reuse of the h3ulcb image, which means the existing
PREFERRED_PROVIDER_virtual/gpsd-conf scheme is not sufficient in
this case.

Bug-AGL: SPEC-3792

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ifaf3b93d06825f7c5c6a8ce2773d93931e47178c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25994
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>

5 files changed, 113 insertions, 0 deletions

diff --git a/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/gpsd.refhw b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/gpsd.refhw
new file mode 100644
index 000000000..d22970681
--- /dev/null
+++ b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/gpsd.refhw
@@ -0,0 +1,5 @@
+# Default settings for gpsd.
+START_DAEMON="true"
+GPSD_OPTIONS=""
+DEVICES="/dev/ttySC3"
+GPSD_SOCKET="/var/run/gpsd.sock"
diff --git a/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh
new file mode 100644
index 000000000..d183ba43c
--- /dev/null
+++ b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Script to detect AGL Reference Hardware and switch gpsd
+# configuration as necessary.
+#
+# NOTE:
+# For the most part errors are ignored and the script returns
+# 0/success so gpsd still be started if the script is somehow
+# run on a board without the expected hardware.
+
+COMPAT=/sys/firmware/devicetree/base/compatible
+GPSTTY=/dev/ttySC3
+
+#if [ ! \( -f "$COMPAT" -a -c "$GPSTTY" -a -f /etc/default/gpsd.refhw \) ]; then
+if [ ! \( -f "$COMPAT" -a -f /etc/default/gpsd.refhw \) ]; then
+    exit 0
+fi
+
+found=false
+for c in `cat $COMPAT | tr '\0' ' '`; do
+    if echo $c | grep -q '^agl,refhw-h3$'; then
+        found=true
+        break
+    fi
+done
+
+if $found; then
+    if [ ! -c "$GPSTTY" ]; then
+        exit 0
+    fi
+    update-alternatives --install /etc/default/gpsd gpsd-defaults /etc/default/gpsd.refhw 20
+else
+    update-alternatives --install /etc/default/gpsd gpsd-defaults /etc/default/gpsd.refhw 5
+fi
+exit 0
diff --git a/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh.bak b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh.bak
new file mode 100644
index 000000000..2c9089aa0
--- /dev/null
+++ b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw-gpsd-helper.sh.bak
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# Script to detect AGL Reference Hardware and switch gpdf configuration
+# as needed.
+#
+# NOTE:
+# For the most part errors are ignored and the script returns
+# 0/success so gpsd still be started if the script is somehow
+# run on a board without the expected hardware.
+
+COMPAT=/sys/firmware/devicetree/base/compatible
+GPSTTY=/dev/ttySC3
+
+if [ ! \( -f "$COMPAT" -a -c "$GPSTTY" -a -f /etc/default/gpsd.refhw \) ]; then
+    exit 0
+fi
+
+found=false
+for c in `cat $COMPAT | tr '\0' ' '`; do
+    echo "c = $c"
+    if echo $c | grep -q '^agl,refhw-h3$'; then
+        found=true
+        break
+    fi
+done
+
+if $found; then
+    update-alternatives --install /etc/default/gpsd gpsd-defaults /etc/default/gpsd.refhw 20
+else
+    update-alternatives --remove gpsd-defaults /etc/default/gpsd.refhw
+fi
+exit 0
diff --git a/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw.conf b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw.conf
new file mode 100644
index 000000000..b7e3a7b0d
--- /dev/null
+++ b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/files/refhw.conf
@@ -0,0 +1,2 @@
+[Service]
+ExecStartPre=-/usr/sbin/refhw-gpsd-helper.sh
diff --git a/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/gpsd-conf-refhw_1.0.bb b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/gpsd-conf-refhw_1.0.bb
new file mode 100644
index 000000000..c87308eb7
--- /dev/null
+++ b/meta-agl-bsp/meta-agl-refhw-gen3/recipes-navigation/gpsd/gpsd-conf-refhw_1.0.bb
@@ -0,0 +1,39 @@
+SUMMARY = "AGL Reference Hardware specific gpsd configuration"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+
+COMPATIBLE_MACHINE = "agl-refhw-h3"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = "file://gpsd.refhw \
+           file://refhw-gpsd-helper.sh \
+           file://refhw.conf \
+"
+
+inherit update-alternatives
+
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
+
+do_install() {
+    install -D -m 0644 ${WORKDIR}/gpsd.refhw ${D}/${sysconfdir}/default/gpsd.refhw
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -D -m 0755 ${WORKDIR}/refhw-gpsd-helper.sh ${D}/${sbindir}/refhw-gpsd-helper.sh
+        install -d ${D}${sysconfdir}/systemd/system/gpsd.service.d
+        install -D -m 0644 ${WORKDIR}/refhw.conf ${D}${sysconfdir}/systemd/system/gpsd.service.d/refhw.conf
+    fi
+}
+
+ALTERNATIVE_${PN} = "gpsd-defaults"
+ALTERNATIVE_LINK_NAME[gpsd-defaults] = "${sysconfdir}/default/gpsd"
+ALTERNATIVE_TARGET[gpsd-defaults] = "${sysconfdir}/default/gpsd.refhw"
+# NOTE: Priority needs to be below default of 10 to avoid overriding the
+#       default configuration.  The script run by the systemd drop-in
+#       will tweak things on boot to handle h3ulcb vs refhw.
+ALTERNATIVE_PRIORITY[gpsd-defaults] = "5"
+
+CONFFILES_${PN} = "${sysconfdir}/default/gpsd.refhw"
+
+# NOTE: Explicitly not defining RPROVIDES of "virtual/gpsd-conf" to
+#       avoid conflicting with the default configuration and potentially
+#       changing behavior on m3ulcb/h3ulcb.