image-vm: Allow for xz compressed vmdk images

In order to save space, introduce a vmdk.xz IMAGE_FSTYPE.  We re-use
the existing xz compression logic in place as given how the images are
created we cannot use CONVERSION_CMD_xz directly.  We switch to using
bb.utils.contains in order to get an exact match on if vmdk.xz or vmdk
is in IMAGE_FSTYPES.

Change-Id: I9aa5fd1c8d80330536b9a38eaa154e3f706a3c2d
AGL-Issue: SPEC-514
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10271
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>

1 files changed, 181 insertions, 0 deletions

diff --git a/meta-agl-bsp/classes/image-vm.bbclass b/meta-agl-bsp/classes/image-vm.bbclass
new file mode 100644
index 000000000..be4159e02
--- /dev/null
+++ b/meta-agl-bsp/classes/image-vm.bbclass
@@ -0,0 +1,181 @@
+# image-vm.bbclass
+# (loosly based off image-live.bbclass Copyright (C) 2004, Advanced Micro Devices, Inc.)
+#
+# Create an image which can be placed directly onto a harddisk using dd and then
+# booted.
+#
+# This uses syslinux. extlinux would have been nice but required the ext2/3
+# partition to be mounted. grub requires to run itself as part of the install
+# process.
+#
+# The end result is a 512 boot sector populated with an MBR and partition table
+# followed by an msdos fat16 partition containing syslinux and a linux kernel
+# completed by the ext2/3 rootfs.
+#
+# We have to push the msdos parition table size > 16MB so fat 16 is used as parted
+# won't touch fat12 partitions.
+
+inherit live-vm-common
+
+do_bootdirectdisk[depends] += "dosfstools-native:do_populate_sysroot \
+                               virtual/kernel:do_deploy \
+                               syslinux:do_populate_sysroot \
+                               syslinux-native:do_populate_sysroot \
+                               parted-native:do_populate_sysroot \
+                               mtools-native:do_populate_sysroot \
+                               ${PN}:do_image_${VM_ROOTFS_TYPE} \
+                               "
+
+IMAGE_TYPEDEP_vmdk = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_vmdk.xz = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_vdi = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_qcow2 = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_hdddirect = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPES_MASKED += "vmdk vmdk.xz vdi qcow2 hdddirect"
+
+VM_ROOTFS_TYPE ?= "ext4"
+ROOTFS ?= "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${VM_ROOTFS_TYPE}"
+
+# Used by bootloader
+LABELS_VM ?= "boot"
+ROOT_VM ?= "root=/dev/sda2"
+# Using an initramfs is optional. Enable it by setting INITRD_IMAGE_VM.
+INITRD_IMAGE_VM ?= ""
+INITRD_VM ?= "${@'${IMGDEPLOYDIR}/${INITRD_IMAGE_VM}-${MACHINE}.cpio.gz' if '${INITRD_IMAGE_VM}' else ''}"
+do_bootdirectdisk[depends] += "${@'${INITRD_IMAGE_VM}:do_image_complete' if '${INITRD_IMAGE_VM}' else ''}"
+
+BOOTDD_VOLUME_ID   ?= "boot"
+BOOTDD_EXTRA_SPACE ?= "16384"
+
+DISK_SIGNATURE ?= "${DISK_SIGNATURE_GENERATED}"
+DISK_SIGNATURE[vardepsexclude] = "DISK_SIGNATURE_GENERATED"
+
+build_boot_dd() {
+	HDDDIR="${S}/hdd/boot"
+	HDDIMG="${S}/hdd.image"
+	IMAGE=${IMGDEPLOYDIR}/${IMAGE_NAME}.hdddirect
+
+	populate_kernel $HDDDIR
+
+	if [ "${PCBIOS}" = "1" ]; then
+		syslinux_hddimg_populate $HDDDIR
+	fi
+	if [ "${EFI}" = "1" ]; then
+		efi_hddimg_populate $HDDDIR
+	fi
+
+	BLOCKS=`du -bks $HDDDIR | cut -f 1`
+	BLOCKS=`expr $BLOCKS + ${BOOTDD_EXTRA_SPACE}`
+
+	# Remove it since mkdosfs would fail when it exists
+	rm -f $HDDIMG
+	mkdosfs -n ${BOOTDD_VOLUME_ID} -S 512 -C $HDDIMG $BLOCKS 
+	mcopy -i $HDDIMG -s $HDDDIR/* ::/
+
+	if [ "${PCBIOS}" = "1" ]; then
+		syslinux_hdddirect_install $HDDIMG
+	fi	
+	chmod 644 $HDDIMG
+
+	ROOTFSBLOCKS=`du -Lbks ${ROOTFS} | cut -f 1`
+	TOTALSIZE=`expr $BLOCKS + $ROOTFSBLOCKS`
+	END1=`expr $BLOCKS \* 1024`
+	END2=`expr $END1 + 512`
+	END3=`expr \( $ROOTFSBLOCKS \* 1024 \) + $END1`
+
+	echo $ROOTFSBLOCKS $TOTALSIZE $END1 $END2 $END3
+	rm -rf $IMAGE
+	dd if=/dev/zero of=$IMAGE bs=1024 seek=$TOTALSIZE count=1
+
+	parted $IMAGE mklabel msdos
+	parted $IMAGE mkpart primary fat16 0 ${END1}B
+	parted $IMAGE unit B mkpart primary ext2 ${END2}B ${END3}B
+	parted $IMAGE set 1 boot on 
+
+	parted $IMAGE print
+
+	awk "BEGIN { printf \"$(echo ${DISK_SIGNATURE} | fold -w 2 | tac | paste -sd '' | sed 's/\(..\)/\\x&/g')\" }" | \
+		dd of=$IMAGE bs=1 seek=440 conv=notrunc
+
+	OFFSET=`expr $END2 / 512`
+	if [ "${PCBIOS}" = "1" ]; then
+		dd if=${STAGING_DATADIR}/syslinux/mbr.bin of=$IMAGE conv=notrunc
+	fi
+
+	dd if=$HDDIMG of=$IMAGE conv=notrunc seek=1 bs=512
+	dd if=${ROOTFS} of=$IMAGE conv=notrunc seek=$OFFSET bs=512
+
+	cd ${IMGDEPLOYDIR}
+
+	ln -sf ${IMAGE_NAME}.hdddirect ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.hdddirect
+} 
+
+python do_bootdirectdisk() {
+    validate_disk_signature(d)
+    set_live_vm_vars(d, 'VM')
+    if d.getVar("PCBIOS", True) == "1":
+        bb.build.exec_func('build_syslinux_cfg', d)
+    if d.getVar("EFI", True) == "1":
+        bb.build.exec_func('build_efi_cfg', d)
+    bb.build.exec_func('build_boot_dd', d)
+}
+
+def generate_disk_signature():
+    import uuid
+
+    signature = str(uuid.uuid4())[:8]
+
+    if signature != '00000000':
+        return signature
+    else:
+        return 'ffffffff'
+
+def validate_disk_signature(d):
+    import re
+
+    disk_signature = d.getVar("DISK_SIGNATURE", True)
+
+    if not re.match(r'^[0-9a-fA-F]{8}$', disk_signature):
+        bb.fatal("DISK_SIGNATURE '%s' must be an 8 digit hex string" % disk_signature)
+
+DISK_SIGNATURE_GENERATED := "${@generate_disk_signature()}"
+
+run_qemu_img (){
+    type="$1"
+    qemu-img convert -O $type ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.hdddirect ${IMGDEPLOYDIR}/${IMAGE_NAME}.$type
+
+    ln -sf ${IMAGE_NAME}.$type ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.$type
+}
+create_vmdk_image () {
+    run_qemu_img vmdk
+}
+
+create_vmdkxz_image () {
+    run_qemu_img vmdk
+    xz -f ${XZ_COMPRESSION_LEVEL} ${XZ_THREADS} --check=${XZ_INTEGRITY_CHECK} ${IMGDEPLOYDIR}/${IMAGE_NAME}.vmdk
+    ln -sf ${IMAGE_NAME}.vmdk.xz ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vmdk.xz
+    rm -f ${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vmdk
+}
+
+create_vdi_image () {
+    run_qemu_img vdi
+}
+
+create_qcow2_image () {
+    run_qemu_img qcow2
+}
+
+python do_vmimg() {
+    if bb.utils.contains('IMAGE_FSTYPES', 'vmdk.xz', True, False, d):
+        bb.build.exec_func('create_vmdkxz_image', d)
+    if bb.utils.contains('IMAGE_FSTYPES', 'vmdk', True, False, d):
+        bb.build.exec_func('create_vmdk_image', d)
+    if 'vdi' in d.getVar('IMAGE_FSTYPES', True):
+        bb.build.exec_func('create_vdi_image', d)
+    if 'qcow2' in d.getVar('IMAGE_FSTYPES', True):
+        bb.build.exec_func('create_qcow2_image', d)
+}
+
+addtask bootdirectdisk before do_vmimg
+addtask vmimg after do_bootdirectdisk before do_image_complete
+do_vmimg[depends] += "qemu-native:do_populate_sysroot"