Remove deprecated bsp files from meta-agl

- hsdk does not have a dunfell branch
- meta-intel was deprecated in favour of a unified qemux86-64 target
- sdcard_image-socfpga is deprecated as upstream changed to use wic

Bug-AGL: SPEC-3468
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ie79fc9c379bd6260a18fe6fe0115d9ce8de1017f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24918
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>

1 files changed, 0 insertions, 182 deletions

diff --git a/meta-agl-bsp/classes/sdcard_image-socfpga.bbclass b/meta-agl-bsp/classes/sdcard_image-socfpga.bbclass
deleted file mode 100644
index 2967063e0..000000000
--- a/meta-agl-bsp/classes/sdcard_image-socfpga.bbclass
+++ /dev/null
@@ -1,182 +0,0 @@
-inherit image_types
-
-# Create an sdcard image suitable for the atlas board
-# This is copied from the raspberrypi and freescale sdcard classes
-
-# Disk layout
-#    0                      -> 8*1024                           - reserverd
-#    8*1024                 -> 32*1024                          - 
-#    32*1024                -> 1024*1024                        - 
-#    1024*1024              -> BOOT_SPACE                       - bootloader and kernel in Part 3
-#    BOOT_SPACE*1024        -> FAT_SPACE
-
-
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_socfpga-sdimg = "${SDIMG_ROOTFS_TYPE}"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB] -> size 2M for A10
-BOOT_SPACE ?= "2048"
-
-# Fat partition size
-FAT_SPACE ?= "102400"
-
-# uBoot ENV offset
-SDIMG_UBOOT_ENV_OFFSET ?= "512"
-ENV_BASE_NAME ??= "${UBOOT_CONFIG}" 
-
-# Boot partition begin at sector 1024
-# This is required as for c5/a5 mainline uboot hard codes the location
-# of the uboot image in the sdcard to 0xa00 sector
-IMAGE_ROOTFS_ALIGNMENT = "1024"
-
-# ROOTFS_SIZE_MOD ?= "524288"
-ROOTFS_SIZE_MOD ?= "16384"
-
-# Use an uncompressed ext3 by default as rootfs
-SDIMG_ROOTFS_TYPE = "ext3"
-SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
-
-
-do_image_socfpga_sdimg[depends] += " \
-			coreutils-native:do_populate_sysroot \
-			parted-native:do_populate_sysroot \
-			mtools-native:do_populate_sysroot \
-			dosfstools-native:do_populate_sysroot \
-			virtual/kernel:do_deploy \
-			virtual/bootloader:do_deploy \
-			"
-
-rootfs[depends] += "virtual/kernel:do_deploy"
-
-# SD card image name
-SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.socfpga-sdimg"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-# After uboot v2016.05 the boot partition number was changed from 3 to 1 so as a
-# result we need 2 different functions for creating the boot partitions just to
-# change the partition creation order
-
-SOCFPGA_SDIMG_PARTITION_COMMAND ?= "generate_sdcard_partitions"
-
-generate_sdcard_partitions () {
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# P1: Fat partition
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 $(expr  ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ ${FAT_SPACE_ALIGNED})
-	# set fat partition as bootable for distroboot
-	parted -s ${SDIMG} set 1 boot on
-	# P2: Linux FS partition
-	parted -s ${SDIMG} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ ${FAT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ ${FAT_SPACE_ALIGNED} \+ ${ROOTFS_SIZE_ALIGNED})
-	# P3: A2 partition for bootloader
-	parted -s ${SDIMG} unit KiB mkpart primary ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-
-	# set part 3 to type a2 for spl / uboot image
-	# 446 to partition table, 16 bytes per entry, 4 byte offset to partition type
-	echo -ne "\xa2" | dd of=${SDIMG} bs=1 count=1 seek=$(expr 446 + 16 + 16 + 4) conv=notrunc && sync && sync
-	
-	# Create a vfat image with boot files
-	FAT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/fat.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/fat.img $FAT_BLOCKS
-	
-}
-
-IMAGE_CMD_socfpga-sdimg () {
-
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	FAT_SPACE_ALIGNED=$(expr ${FAT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)  
-	FAT_SPACE_ALIGNED=$(expr ${FAT_SPACE_ALIGNED} - ${FAT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	
-	ROOTFS_SIZE_ALIGNED=$(expr ${ROOTFS_SIZE} \+ ${ROOTFS_SIZE_MOD})
-	ROOTFS_SIZE_ALIGNED=$(expr ${ROOTFS_SIZE_ALIGNED} \- ${ROOTFS_SIZE_ALIGNED} \% ${ROOTFS_SIZE_MOD})
-	
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + ${FAT_SPACE_ALIGNED} + ${ROOTFS_SIZE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT})
-	
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE}) && sync && sync
-	
-	# Create partition table
-	${SOCFPGA_SDIMG_PARTITION_COMMAND}
-
-	# Copy kernel image
-	mcopy -i ${WORKDIR}/fat.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE}
-	
-	# Copy boot scripts
-	if [ -e "${DEPLOY_DIR_IMAGE}/${MACHINE}.scr" ]
-	then
-		mcopy -i ${WORKDIR}/fat.img -s ${DEPLOY_DIR_IMAGE}/${MACHINE}.scr ::/u-boot.scr
-	fi
-	
-	# Copy device tree file
-	if test -n "${KERNEL_DEVICETREE}"; then
-		for DTS_FILE in ${KERNEL_DEVICETREE}; do
-			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
-			if [ -e "${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
-				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
-				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
-				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
-					mcopy -i ${WORKDIR}/fat.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
-				fi
-			fi
-		done
-	fi
-
-	# copy extlinux stuff
-	if [ "${UBOOT_EXTLINUX}" = "1" ]
-	then
-		if [ -e "${DEPLOY_DIR_IMAGE}/extlinux.conf" ]
-		then
-			rm -Rf ${WORKDIR}/extlinux
-			mkdir ${WORKDIR}/extlinux
-			cp ${DEPLOY_DIR_IMAGE}/extlinux.conf ${WORKDIR}/extlinux/
-			mcopy -i ${WORKDIR}/fat.img -s ${WORKDIR}/extlinux ::/
-		fi
-		
-	fi
-
-	# copy any files listed as extra files
-	if test -n "${SOCFPGA_SDIMG_EXTRA_FILES}"; then 
-		for EXTRA_FILE in ${SOCFPGA_SDIMG_EXTRA_FILES}; do
-			if [ -e "${DEPLOY_DIR_IMAGE}/${EXTRA_FILE}" ]; then
-				mcopy -i ${WORKDIR}/fat.img -s ${DEPLOY_DIR_IMAGE}/${EXTRA_FILE} ::/${EXTRA_FILE}
-			fi
-		done
-	fi
-
-	# Add stamp file
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/fat.img -v ${WORKDIR}//image-version-info ::
-
-	# Burn Partitions
-	dd if=${WORKDIR}/fat.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + 1024 \* ${FAT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + 1024 \* ${FAT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	if [ -e "${DEPLOY_DIR_IMAGE}/${SPL_BINARY}-${UBOOT_CONFIG}" ]
-	then
-            dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY}-${UBOOT_CONFIG} of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	elif [ -e "${DEPLOY_DIR_IMAGE}/${SPL_BINARY}" ]
-	then
-            dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-            bbfatal "${SPL_BINARY} does not exist."
-	fi
-	
-	if [ -e "${DEPLOY_DIR_IMAGE}/u-boot-env-${ENV_BASE_NAME}.bin" ]; then 
-		dd if=${DEPLOY_DIR_IMAGE}/u-boot-env-${ENV_BASE_NAME}.bin of=${SDIMG} conv=notrunc bs=1 seek=${SDIMG_UBOOT_ENV_OFFSET} && sync && sync
-	fi
-	
-}