aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/classes
diff options
context:
space:
mode:
authorLeon Anavi <leon.anavi@konsulko.com>2016-09-22 15:00:46 +0300
committerJan-Simon Moeller <jsmoeller@linuxfoundation.org>2016-09-25 04:04:48 +0000
commit3acb532fd1c18c18272cc9c5c1d6530aecead700 (patch)
tree97c876dbbd1dedd4275240876412a9be4338bfff /meta-agl-bsp/classes
parentb938fee8b0ab185bb036cde17537dd0ad65ab3e1 (diff)
meta-raspberrypi: AGL support for Raspberry Pi
Yocto/OE layer that extends the recipes for mesa and the supported Linux kernel for Raspberry Pi for successful build of AGL with Wayland, Weston and Qt. It is based on the existing ports of Tizen and GENIVI Development Platform for Raspberry Pi. Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Diffstat (limited to 'meta-agl-bsp/classes')
-rw-r--r--meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass96
1 files changed, 96 insertions, 0 deletions
diff --git a/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass b/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass
new file mode 100644
index 000000000..2956dd075
--- /dev/null
+++ b/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass
@@ -0,0 +1,96 @@
+inherit sdcard_image-rpi
+
+IMAGE_CMD_rpi-sdimg () {
+
+ # Align partitions
+ BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+ BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+ SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE)
+
+ echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
+
+ # Check if we are building with device tree support
+ DTS="${@get_dts(d, None)}"
+
+ # Initialize sdcard image file
+ dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
+
+ # Create partition table
+ parted -s ${SDIMG} mklabel msdos
+ # Create boot partition and mark it as bootable
+ parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+ parted -s ${SDIMG} set 1 boot on
+ # Create rootfs partition to the end of disk
+ parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
+ parted ${SDIMG} print
+
+ # Create a vfat image with boot files
+ BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+ rm -f ${WORKDIR}/boot.img
+ mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
+ case "${KERNEL_IMAGETYPE}" in
+ "uImage")
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.img ::${SDIMG_KERNELIMAGE}
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage
+ ;;
+ *)
+ if test -n "${DTS}"; then
+ # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
+ DT_OVERLAYS="${@split_overlays(d, 0)}"
+ DT_ROOT="${@split_overlays(d, 1)}"
+
+ # Copy board device trees to root folder
+ for DTB in ${DT_ROOT}; do
+ DTB_BASE_NAME=`basename ${DTB} .dtb`
+
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
+ done
+
+ # Copy device tree overlays to dedicated folder
+ mmd -i ${WORKDIR}/boot.img overlays
+ for DTB in ${DT_OVERLAYS}; do
+ DTB_BASE_NAME=`basename ${DTB} .dtb`
+
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::overlays/${DTB_BASE_NAME}.dtbo
+ done
+ fi
+ mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
+ ;;
+ esac
+
+ if [ -n ${FATPAYLOAD} ] ; then
+ echo "Copying payload into VFAT"
+ for entry in ${FATPAYLOAD} ; do
+ # add the || true to stop aborting on vfat issues like not supporting .~lock files
+ mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
+ done
+ fi
+
+ # Add stamp file
+ echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
+ mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
+
+ # Burn Partitions
+ dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+ # If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+ if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
+ then
+ xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+ else
+ dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+ fi
+
+ # Optionally apply compression
+ case "${SDIMG_COMPRESSION}" in
+ "gzip")
+ gzip -k9 "${SDIMG}"
+ ;;
+ "bzip2")
+ bzip2 -k9 "${SDIMG}"
+ ;;
+ "xz")
+ xz -k "${SDIMG}"
+ ;;
+ esac
+}