Fix up i.MX8MQ EVK configuration

Changes:
- Since linux-fslc-lts does not boot on the EVK at the moment,
  and both it and linux-fslc still do not have support for the
  HDMI output, switch back to using linux-fslc-imx with tweaks
  to use etnaviv as we did pre-kirkstone.
- A bbappend has been added for linux-fslc-lts since that was
  missed in a previous upgrade, and even though we are not using
  it now, it is possibly useful for other i.MX variants.
- A machine template for using the NXP BSP with the Vivante GPU
  driver, imx8mq-evk-viv, has been restored, as testing shows it
  now works with the current panel-less homescreens.  As before,
  the intent of this configuration is for testing or as an example
  of potential production use of meta-freescale where NXP support
  is available.
- Start up of Bluetooth support has been disabled, as it currently
  causes kernel oopses or panics (both have been seen in testing).
  This happens with both machine templates.  SPEC-4807 has been
  opened to track this issue.

Bug-AGL: SPEC-4799

Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28937
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>

6 files changed, 35 insertions, 49 deletions

diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0001-enable-mhdp-with-etnaviv.patch b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0001-enable-mhdp-with-etnaviv.patch
index 23ca0475a..f95891a2f 100644
--- a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0001-enable-mhdp-with-etnaviv.patch
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0001-enable-mhdp-with-etnaviv.patch
@@ -8,16 +8,15 @@ Upstream-Status: pending
 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
 ---
 
-diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
-index 63d5f1b532ee..a18ba56aa218 100644
---- a/drivers/gpu/drm/imx/Kconfig
-+++ b/drivers/gpu/drm/imx/Kconfig
-@@ -85,7 +85,7 @@ config DRM_IMX_CDNS_MHDP
- 	select DRM_CDNS_DP
+diff --git a/drivers/gpu/drm/imx/mhdp/Kconfig b/drivers/gpu/drm/imx/mhdp/Kconfig
+index 225ccc3638a8..164b42f04e94 100644
+--- a/drivers/gpu/drm/imx/mhdp/Kconfig
++++ b/drivers/gpu/drm/imx/mhdp/Kconfig
+@@ -7,6 +7,6 @@ config DRM_IMX_CDNS_MHDP
  	select DRM_CDNS_HDMI
  	select DRM_CDNS_AUDIO
+ 	select DRM_CDNS_HDMI_HDCP
 -	depends on DRM_IMX
 +	depends on DRM_IMX || DRM_ETNAVIV
  	help
  	  Choose this if you want to use HDMI on i.MX8.
- 
diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0002-dts-enable-etnaviv.patch b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0002-dts-enable-etnaviv.patch
index 4ce9b9d38..4ed4b685e 100644
--- a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0002-dts-enable-etnaviv.patch
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx/0002-dts-enable-etnaviv.patch
@@ -4,15 +4,14 @@ Some further investigation is required into how to manage this upstream
 in meta-freescale, as it is not required for the i.MX6 platforms AFAIK.
 
 Upstream-Status: pending
-
 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
 ---
 
 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
-index f2a7e4069a0d..c0b6c5052656 100755
+index c3f8a24c3943..754fbfe30f0a 100755
 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
 +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
-@@ -1074,7 +1074,7 @@
+@@ -1224,7 +1224,7 @@ &vpu_v4l2 {
  	status = "okay";
  };
  
diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx_%.bbappend b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx_%.bbappend
index cc26e25c6..0772a98a8 100644
--- a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx_%.bbappend
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-imx_%.bbappend
@@ -1,6 +1,6 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:${THISDIR}/files:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
 
-require recipes-kernel/linux/linux-yocto-agl.inc
+require linux-fslc.inc
 
 # These patches and the configuration fragment below will need to be
 # revisited if/when using IMX_DEFAULT_BSP = "mainline" with i.MX8
@@ -10,22 +10,8 @@ SRC_URI:append:etnaviv = " \
     file://0002-dts-enable-etnaviv.patch \
 "
 
-# Make sure these are enabled so that AGL systemd configuration works
-AGL_KCONFIG_FRAGMENTS += " \
-    tmpfs.cfg \
-    namespace.cfg \
-    cgroup.cfg \
-"
-
-# Support for CFG80211 subsystem
-AGL_KCONFIG_FRAGMENTS += "cfg80211.cfg"
-
-# Turn off a couple of things enabled by default by Freescale
-# (lock debugging and userspace firmware loader fallback)
-AGL_KCONFIG_FRAGMENTS += "fixups.cfg"
-
 # Support for i.MX8MQ EVKB (e.g. Broadcom wifi)
-AGL_KCONFIG_FRAGMENTS:append:imx8mqevk = " imx8mq-evkb.cfg"
+AGL_KCONFIG_FRAGMENTS:append:imx8mq-evk = " imx8mq-evkb.cfg"
 
 # Build in etnaviv if required
 AGL_KCONFIG_FRAGMENTS:append:etnaviv = " etnaviv.cfg"
diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-lts_%.bbappend b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-lts_%.bbappend
new file mode 100644
index 000000000..1007f3c7c
--- /dev/null
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc-lts_%.bbappend
@@ -0,0 +1 @@
+require linux-fslc.inc
diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc.inc b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc.inc
new file mode 100644
index 000000000..948b8c22c
--- /dev/null
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc.inc
@@ -0,0 +1,22 @@
+FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
+
+require recipes-kernel/linux/linux-yocto-agl.inc
+
+# Make sure these are enabled so that AGL systemd configuration works
+AGL_KCONFIG_FRAGMENTS += " \
+    tmpfs.cfg \
+    namespace.cfg \
+    cgroup.cfg \
+"
+
+# Support for CFG80211 subsystem
+AGL_KCONFIG_FRAGMENTS += "cfg80211.cfg"
+
+# Turn off a couple of things enabled by default by Freescale
+# (lock debugging and userspace firmware loader fallback)
+AGL_KCONFIG_FRAGMENTS += "fixups.cfg"
+
+do_install:append:cubox-i() {
+    # Add symlink to work with default Hummingboard 2 u-boot configuration
+    ln -sf imx6q-hummingboard2.dtb ${D}/boot/imx6q-hummingboard2-emmc.dtb
+}
diff --git a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc_%.bbappend b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc_%.bbappend
index 948b8c22c..1007f3c7c 100644
--- a/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc_%.bbappend
+++ b/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux/linux-fslc_%.bbappend
@@ -1,22 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
-
-require recipes-kernel/linux/linux-yocto-agl.inc
-
-# Make sure these are enabled so that AGL systemd configuration works
-AGL_KCONFIG_FRAGMENTS += " \
-    tmpfs.cfg \
-    namespace.cfg \
-    cgroup.cfg \
-"
-
-# Support for CFG80211 subsystem
-AGL_KCONFIG_FRAGMENTS += "cfg80211.cfg"
-
-# Turn off a couple of things enabled by default by Freescale
-# (lock debugging and userspace firmware loader fallback)
-AGL_KCONFIG_FRAGMENTS += "fixups.cfg"
-
-do_install:append:cubox-i() {
-    # Add symlink to work with default Hummingboard 2 u-boot configuration
-    ln -sf imx6q-hummingboard2.dtb ${D}/boot/imx6q-hummingboard2-emmc.dtb
-}
+require linux-fslc.inc