Upgrade to thud

Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
  configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
  latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
  linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
  longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
  Kprobes. This is required until linux-raspberrypi is updated to
  greater than 4.14.104 to avoid a build failure in lttng-modules
  related to a check for known breakage in the kernel CONFIG_OPTPROBES
  code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
  faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
  warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
  available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
  against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
  move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
  in run-postinsts bbappend to workaround race condition between
  ldconfig.service and the /sbin/ldconfig invocations in the
  post-install scripts run by run-postinsts.service.  The observed
  failure was cynara's post-install script failing and its database
  not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
  agl-demo-platform-html5-crosssdk, upstream have removed it from
  non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
  local patches
- Update weston patches for 5.0.0. Patches:

  0016-ivi-shell_add_screen_remove_layer_api.patch
  0017-ivi-shell-register-ivi_layout_interface.patch

  have been removed as they have been applied upstream and are no longer
  necessary. Patches:

  0018-compositor-add-output-type-to-weston_output.patch
  0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch

  (both related to Waltham) have been disabled for now as they need
  significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
  with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
  around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
  cynara package so the directory creation and labelling in the
  post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning

Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend

Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
  patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
  dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
  sumo or newer

Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
  bbappend to version 1.0.1

Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
  OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
  disabled
- Currently unclear if patch to libcap-native is actually required or
  not

Bug-AGL: SPEC-1837

Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>

7 files changed, 16 insertions, 79 deletions

diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
index 44f90272e..7cc76c06e 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
@@ -5,7 +5,7 @@ PR = "r1"
 LICENSE = "MIT"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
 
-DEPENDS = "fdtoverlay-native"
+DEPENDS = "dtc-native"
 
 ALLOW_EMPTY_${PN} = "1"
 FILES_${PN} = ""
@@ -16,20 +16,20 @@ do_compile[depends] += "virtual/kernel:do_deploy"
 
 do_compile () {
 	# Official touchscreen setup (rpi3b/rpi3b dtb, vc4-kms-v3d and ft5406)
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/uImage-bcm2710-rpi-3-b-plus.dtb -o uImage-bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/uImage-vc4-kms-v3d.dtbo
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/uImage-bcm2710-rpi-3-b.dtb -o uImage-bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/uImage-vc4-kms-v3d.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
 
 	# HDMI screen setup (rpi3b/rpi3b dtb and vc4-kms-v3d)
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/uImage-bcm2710-rpi-3-b-plus.dtb -o uImage-bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/uImage-vc4-kms-v3d.dtbo
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/uImage-bcm2710-rpi-3-b.dtb -o uImage-bcm2710-rpi-3+vc4.dtb ${DEPLOY_DIR_IMAGE}/uImage-vc4-kms-v3d.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
 }
 
 do_deploy () {
 	install -d ${DEPLOY_DIR_IMAGE}
-	install -m 0644 ${S}/uImage-bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}
-	install -m 0644 ${S}/uImage-bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}
-	install -m 0644 ${S}/uImage-bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}
-	install -m 0644 ${S}/uImage-bcm2710-rpi-3+vc4.dtb ${DEPLOY_DIR_IMAGE}
+	install -m 0644 ${S}/bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}
+	install -m 0644 ${S}/bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}
+	install -m 0644 ${S}/bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}
+	install -m 0644 ${S}/bcm2710-rpi-3+vc4.dtb ${DEPLOY_DIR_IMAGE}
 }
 
 addtask deploy after do_install
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay.inc b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay.inc
deleted file mode 100644
index e769a1864..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay.inc
+++ /dev/null
@@ -1,26 +0,0 @@
-SUMMARY = "fdtoverlay from the device tree compiler"
-HOMEPAGE = "https://devicetree.org/"
-DESCRIPTION = "fdtoverlay is a tool to apply a number of overlays to a base blob."
-SECTION = "bootloader"
-LICENSE = "GPLv2 | BSD"
-DEPENDS = "flex-native bison-native"
-
-SRC_URI = "git://git.kernel.org/pub/scm/utils/dtc/dtc.git \
-           file://make_install.patch \
-           "
-UPSTREAM_CHECK_GITTAGREGEX = "v(?P<pver>\d+(\.\d+)+)"
-
-EXTRA_OEMAKE='NO_PYTHON=1 PREFIX="${prefix}" LIBDIR="${libdir}" DESTDIR="${D}"'
-
-S = "${WORKDIR}/git"
-
-do_compile () {
-	oe_runmake fdtoverlay
-}
-
-do_install () {
-	install -d ${D}/${bindir}
-	install -m 0755 ${S}/fdtoverlay ${D}/${bindir}/fdtoverlay
-}
-
-FILES_${PN} = "${bindir}/fdtoverlay"
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay/make_install.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay/make_install.patch
deleted file mode 100644
index ea9359e81..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay/make_install.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e9852b9d206df1e42aa4c8afec55a0f5e099b533 Mon Sep 17 00:00:00 2001
-From: Saul Wold <sgw@linux.intel.com>
-Date: Thu, 3 Nov 2011 08:35:47 -0700
-Subject: [PATCH] dtc: Add patch to correctly install shared libraries and
-
-Upstream-Status: Inappropriate [configuration]
-
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index d8ebc4f..f5e01be 100644
---- a/Makefile
-+++ b/Makefile
-@@ -205,8 +205,8 @@ install-bin: all $(SCRIPTS)
- install-lib: all
- 	@$(VECHO) INSTALL-LIB
- 	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
--	$(INSTALL_LIB) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
--	ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
-+	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
-+	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/$(notdir $(LIBFDT_lib))
- 	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/libfdt.$(SHAREDLIB_EXT)
- 	$(INSTALL_DATA) $(LIBFDT_archive) $(DESTDIR)$(LIBDIR)
- 
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay_1.4.7.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay_1.4.7.bb
deleted file mode 100644
index 91981987d..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/fdtoverlay/fdtoverlay_1.4.7.bb
+++ /dev/null
@@ -1,10 +0,0 @@
-require fdtoverlay.inc
-
-LIC_FILES_CHKSUM = "file://GPL;md5=94d55d512a9ba36caa9b7df079bae19f \
-		    file://libfdt/libfdt.h;beginline=3;endline=52;md5=fb360963151f8ec2d6c06b055bcbb68c"
-
-SRCREV = "88f18909db731a627456f26d779445f84e449536"
-
-S = "${WORKDIR}/git"
-
-BBCLASSEXTEND = "native nativesdk"
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
deleted file mode 100644
index 9df797fab..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ /dev/null
@@ -1,5 +0,0 @@
-# In releases based on Rocko firmware files for bcm43430 and
-# bcm43455 are provided by linux-firmware-raspbian. The lines
-# below fix eventual duplication of these files.
-FILES_${PN}-bcm43455 = ""
-FILES_${PN}-bcm43430 = ""
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/disable_kprobes.cfg b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/disable_kprobes.cfg
new file mode 100644
index 000000000..4a67a7e6b
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/disable_kprobes.cfg
@@ -0,0 +1 @@
+CONFIG_KPROBES=n
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
index 855a86257..92dd6e7d2 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
@@ -1,17 +1,20 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
 
 require recipes-kernel/linux/linux-agl.inc
-require recipes-kernel/linux/linux-agl-4.9.inc
+require recipes-kernel/linux/linux-agl-4.14.inc
 
+# NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated
+#       to newer than 4.14.104 to avoid lttng-modules failing to build.
 SRC_URI_append = "\
-    ${@base_conditional('USE_FAYTECH_MONITOR', '1', 'file://0002-faytech-fix-rpi.patch', '', d)} \
+    ${@oe.utils.conditional('USE_FAYTECH_MONITOR', '1', 'file://0002-faytech-fix-rpi.patch', '', d)} \
+    file://disable_kprobes.cfg \
 "
 
 CMDLINE_DEBUG = ""
 CMDLINE_append = " usbhid.mousepoll=0"
 
 # Add options to allow CMA to operate
-CMDLINE_append = ' ${@base_conditional("ENABLE_CMA", "1", "coherent_pool=6M smsc95xx.turbo_mode=N", "", d)}'
+CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_CMA", "1", "coherent_pool=6M smsc95xx.turbo_mode=N", "", d)}'
 
 KERNEL_MODULE_AUTOLOAD += "snd-bcm2835"
 KERNEL_MODULE_AUTOLOAD += "hid-multitouch"