Merge "Fix rpi touchscreen support on master"

8 files changed, 1112 insertions, 4 deletions

diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend
index adb19c09c..7998c826a 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bbappend
@@ -1 +1,10 @@
 RDEPENDS_${PN}_append_sota += " u-boot-otascript"
+
+# uprev firmware
+
+RPIFW_DATE = "20190517"
+SRCREV = "e1900836948f6c6bdf4571da1b966a9085c95d37"
+SRC_URI[md5sum] = "ba272fed3661f0c8d5e4c424d2617246"
+SRC_URI[sha256sum] = "2a4c566e98b16575ebf295b795b40a5772f81282948e957bdc9733cf72fdcd39"
+
+PV = "${RPIFW_DATE}"
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend
index 9222fd52a..e4246e958 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend
@@ -11,8 +11,10 @@ do_deploy_append() {
 
     echo "avoid_warnings=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     echo "mask_gpu_interrupt0=0x400" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-    echo "dtoverlay=vc4-kms-v3d-overlay,cma-256" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-    echo "dtoverlay=rpi-ft5406-overlay" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtoverlay=vc4-kms-v3d,cma-256" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtoverlay=rpi-7inch"  >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtoverlay=rpi-backlight"  >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtoverlay=rpi-ft5406" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
index 7cc76c06e..bed3062ee 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
@@ -16,8 +16,8 @@ do_compile[depends] += "virtual/kernel:do_deploy"
 
 do_compile () {
 	# Official touchscreen setup (rpi3b/rpi3b dtb, vc4-kms-v3d and ft5406)
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
-	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo
+	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo
 
 	# HDMI screen setup (rpi3b/rpi3b dtb and vc4-kms-v3d)
 	fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
new file mode 100644
index 000000000..fce687290
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
@@ -0,0 +1,351 @@
+From 380fd9f0da44ed62dff59a7c7e06f1190b58aa64 Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 12:22:31 +0000
+Subject: [PATCH 1/4] Add devicetree support for RaspberryPi 7" panel over DSI
+ I2C
+
+---
+ arch/arm/boot/dts/bcm2708-rpi-b-plus.dts      |  5 +++
+ arch/arm/boot/dts/bcm2708-rpi-b.dts           |  6 +++
+ arch/arm/boot/dts/bcm2708-rpi.dtsi            | 21 ++++++++++
+ arch/arm/boot/dts/bcm2709-rpi-2-b.dts         |  5 +++
+ arch/arm/boot/dts/bcm270x.dtsi                | 39 +++++++++++++++++
+ arch/arm/boot/dts/bcm2710-rpi-3-b.dts         |  6 +++
+ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts      |  5 +++
+ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts      |  5 +++
+ arch/arm/boot/dts/bcm2835-rpi-b.dts           |  5 +++
+ arch/arm/boot/dts/bcm2835-rpi.dtsi            |  2 +
+ arch/arm/boot/dts/bcm2836-rpi-2-b.dts         |  5 +++
+ arch/arm/boot/dts/bcm2837-rpi-3-b.dts         |  5 +++
+ arch/arm/boot/dts/bcm283x.dtsi                | 16 ++++++-
+ arch/arm/boot/dts/overlays/Makefile           |  1 +
+ .../boot/dts/overlays/rpi-7inch-overlay.dts   | 42 +++++++++++++++++++
+ 15 files changed, 167 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+
+diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+index ef0beea3a3a3..83b95b9a6ec3 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+@@ -121,3 +121,8 @@
+ 		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ 	};
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 28 0
++		 &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts
+index dea70fae90e6..ea5de651d59d 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
+@@ -111,3 +111,9 @@
+ 		act_led_trigger = <&act_led>,"linux,default-trigger";
+ 	};
+ };
++
++
++&i2c_dsi {
++	gpios = <&gpio 2 0
++		 &gpio 3 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi
+index b13632932192..2d8421f6681c 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
+@@ -132,6 +132,27 @@
+ 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+ };
+ 
++&v3d {
++        power-domains = <&power RPI_POWER_DOMAIN_V3D>;
++};
++
++&vec {
++        power-domains = <&power RPI_POWER_DOMAIN_VEC>;
++        status = "okay";
++};
++
++&dsi0 {
++        power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
++        status = "okay";
++};
++
++&dsi1 {
++        power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++        status = "okay";
++};
++
++
++
+ &clocks {
+ 	firmware = <&firmware>;
+ };
+diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+index 34659505055a..c23f79395791 100644
+--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+@@ -122,3 +122,8 @@
+ 		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ 	};
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 28 0
++		 &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi
+index f086ff0deec5..0b1ef47b18b0 100644
+--- a/arch/arm/boot/dts/bcm270x.dtsi
++++ b/arch/arm/boot/dts/bcm270x.dtsi
+@@ -84,6 +84,26 @@
+ 			status = "disabled";
+ 		};
+ 
++		dsi1: dsi@7e700000 {
++			compatible = "brcm,bcm2835-dsi1";
++			reg = <0x7e700000 0x8c>;
++			interrupts = <2 12>;
++			#address-cells = <1>;
++			#size-cells = <0>;
++			#clock-cells = <1>;
++
++			clocks = <&clocks BCM2835_PLLD_DSI1>,
++				 <&clocks BCM2835_CLOCK_DSI1E>,
++				 <&clocks BCM2835_CLOCK_DSI1P>;
++			clock-names = "phy", "escape", "pixel";
++
++			clock-output-names = "dsi1_byte",
++					     "dsi1_ddr2",
++					     "dsi1_ddr";
++
++			status = "disabled";
++		};
++
+ 		firmwarekms: firmwarekms@7e600000 {
+ 			compatible = "raspberrypi,rpi-firmware-kms";
+ 			/* SMI interrupt reg */
+@@ -93,6 +113,21 @@
+ 			status = "disabled";
+ 		};
+ 
++                i2c_dsi: i2cdsi {
++                        /* We have to use i2c-gpio because the
++                         * firmware is also polling another device
++                         * using the only hardware I2C bus that could
++                         * connect to these pins.
++                         */
++                        compatible = "i2c-gpio";
++                        #address-cells = <1>;
++                        #size-cells = <0>;
++                        status = "disabled";
++                        gpios = <&gpio 28 0
++                                 &gpio 29 0>;
++
++                };
++
+ 		smi: smi@7e600000 {
+ 			compatible = "brcm,bcm2835-smi";
+ 			reg = <0x7e600000 0x100>;
+@@ -187,3 +222,7 @@
+ &vc4 {
+ 	status = "disabled";
+ };
++
++&dsi1 {
++	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++};
+diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+index 37aed344cbbf..6ec9b28999f3 100644
+--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+@@ -190,3 +190,9 @@
+ 		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ 	};
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 44 0
++		 &gpio 45 0>;
++};
++
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+index a462de2ce37e..346efbd4a95f 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+@@ -109,3 +109,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 28 0
++		 &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+index 264c84e94329..8b9ebf3670c2 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+@@ -102,3 +102,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 2 0
++		 &gpio 3 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+index 03e3a7a7dc5e..4020e79fc989 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+@@ -97,3 +97,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 28 0
++		 &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+index 356d4e6a17e5..0599f0a27e5f 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+@@ -101,10 +101,12 @@
+ 
+ &dsi0 {
+ 	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
++	status = "okay";
+ };
+ 
+ &dsi1 {
+ 	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++	status = "okay";
+ };
+ 
+ &csi0 {
+diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+index 59e70f4a19e5..6c4c9c8d8ed0 100644
+--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+@@ -47,3 +47,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 28 0
++		 &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+index 8703d006a206..c99f70cefa61 100644
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+@@ -56,3 +56,8 @@
+ 	status = "okay";
+ 	bus-width = <4>;
+ };
++
++&i2c_dsi {
++	gpios = <&gpio 44 0
++		 &gpio 45 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
+index 22eca6fad427..3ee99963f827 100644
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -551,7 +551,6 @@
+ 			clock-output-names = "dsi1_byte",
+ 					     "dsi1_ddr2",
+ 					     "dsi1_ddr";
+-
+ 			status = "disabled";
+ 		};
+ 
+@@ -652,6 +651,21 @@
+ 		vc4: gpu {
+ 			compatible = "brcm,bcm2835-vc4";
+ 		};
++
++		i2c_dsi: i2cdsi {
++			/* We have to use i2c-gpio because the
++			 * firmware is also polling another device
++			 * using the only hardware I2C bus that could
++			 * connect to these pins.
++			 */
++			compatible = "i2c-gpio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			status = "disabled";
++			gpios = <&gpio 28 0
++				 &gpio 29 0>;
++
++		};
+ 	};
+ 
+ 	clocks {
+diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
+index e0bdd84d21c5..f983d0180b8b 100644
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -110,6 +110,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	rpi-cirrus-wm5102.dtbo \
+ 	rpi-dac.dtbo \
+ 	rpi-display.dtbo \
++	rpi-7inch.dtbo \
+ 	rpi-ft5406.dtbo \
+ 	rpi-poe.dtbo \
+ 	rpi-proto.dtbo \
+diff --git a/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+new file mode 100644
+index 000000000000..3bb882d79086
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+@@ -0,0 +1,42 @@
++/*
++ * Device Tree overlay for RaspberryPi 7" Touchscreen panel
++ *
++ */
++
++/dts-v1/; 
++/plugin/; 
++
++/ {
++        compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
++
++        fragment@1 {
++                target = <&dsi1>;
++                __overlay__ {
++                        #address-cells = <1>; size-cells = <0>;
++                        status = "okay";
++                        port {
++                                dsi_out_port: endpoint {
++                                        remote-endpoint = <&panel_dsi_port>;
++                                };
++                        };
++                };
++        };
++
++        fragment@2 {
++                target = <&i2c_dsi>;
++                __overlay__ {
++                        #address-cells = <1>;
++			#size-cells = <0>;
++                        status = "okay";
++			lcd@45 {
++				compatible = "raspberrypi,7inch-touchscreen-panel";
++				reg = <0x45>;
++				port {
++					panel_dsi_port: endpoint {
++						remote-endpoint = <&dsi_out_port>;
++					};
++				};
++			};
++                };
++        };
++};
+-- 
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
new file mode 100644
index 000000000..13d821418
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
@@ -0,0 +1,102 @@
+From ab06860f2361a3750ec3a62347e0fdd7873cb30d Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 18:07:40 +0000
+Subject: [PATCH 2/4] drm/vc4: Make DSI call into the bridge after the DSI link
+ is enabled. bring this patch https://patchwork.kernel.org/patch/10480937/ to
+ Linux rpi-4.14.y
+
+This allows panels or bridges that need to send DSI commands during
+pre_enable() to successfully send them.  We delay DISP0 (aka the
+actual display) enabling until after pre_enable so that pixels aren't
+streaming before then.
+
+v2: Just clear out the encoder->bridge value to disable the midlayer
+    calls (idea by Andrzej Hajda).
+---
+ drivers/gpu/drm/vc4/vc4_dsi.c | 48 ++++++++++++++++++++++++-----------
+ 1 file changed, 33 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
+index a3f416cbd1d6..3fa2db18d70f 100644
+--- a/drivers/gpu/drm/vc4/vc4_dsi.c
++++ b/drivers/gpu/drm/vc4/vc4_dsi.c
+@@ -814,7 +814,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
+ 	struct vc4_dsi *dsi = vc4_encoder->dsi;
+ 	struct device *dev = &dsi->pdev->dev;
+ 
++	drm_bridge_disable(dsi->bridge);
+ 	vc4_dsi_ulps(dsi, true);
++	drm_bridge_post_disable(dsi->bridge);
+ 
+ 	clk_disable_unprepare(dsi->pll_phy_clock);
+ 	clk_disable_unprepare(dsi->escape_clock);
+@@ -1089,21 +1091,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
+ 	/* Display reset sequence timeout */
+ 	DSI_PORT_WRITE(PR_TO_CNT, 100000);
+ 
+-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+-		DSI_PORT_WRITE(DISP0_CTRL,
+-			       VC4_SET_FIELD(dsi->divider,
+-					     DSI_DISP0_PIX_CLK_DIV) |
+-			       VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
+-			       VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
+-					     DSI_DISP0_LP_STOP_CTRL) |
+-			       DSI_DISP0_ST_END |
+-			       DSI_DISP0_ENABLE);
+-	} else {
+-		DSI_PORT_WRITE(DISP0_CTRL,
+-			       DSI_DISP0_COMMAND_MODE |
+-			       DSI_DISP0_ENABLE);
+-	}
+-
+ 	/* Set up DISP1 for transferring long command payloads through
+ 	 * the pixfifo.
+ 	 */
+@@ -1128,6 +1115,25 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
+ 
+ 	vc4_dsi_ulps(dsi, false);
+ 
++	drm_bridge_pre_enable(dsi->bridge);
++
++	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
++		DSI_PORT_WRITE(DISP0_CTRL,
++			       VC4_SET_FIELD(dsi->divider,
++					     DSI_DISP0_PIX_CLK_DIV) |
++			       VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
++			       VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
++					     DSI_DISP0_LP_STOP_CTRL) |
++			       DSI_DISP0_ST_END |
++			       DSI_DISP0_ENABLE);
++	} else {
++		DSI_PORT_WRITE(DISP0_CTRL,
++			       DSI_DISP0_COMMAND_MODE |
++			       DSI_DISP0_ENABLE);
++	}
++
++	drm_bridge_enable(dsi->bridge);
++
+ 	if (debug_dump_regs) {
+ 		DRM_INFO("DSI regs after:\n");
+ 		vc4_dsi_dump_regs(dsi);
+@@ -1656,6 +1662,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 
+ 	dev_set_drvdata(dev, dsi);
+ 
++	ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
++	if (ret) {
++		dev_err(dev, "bridge attach failed: %d\n", ret);
++		return ret;
++	}
++	/* Disable the atomic helper calls into the bridge.  We
++	 * manually call the bridge pre_enable / enable / etc. calls
++	 * from our driver, since we need to sequence them within the
++	 * encoder's enable/disable paths.
++	 */
++	dsi->encoder->bridge = NULL;
++
+ 	pm_runtime_enable(dev);
+ 
+ 	return 0;
+-- 
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
new file mode 100644
index 000000000..0e6e068fe
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
@@ -0,0 +1,217 @@
+From 2ccd080392adfb1f077f2f4d289651b6b15e0951 Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 18:09:52 +0000
+Subject: [PATCH 3/4] drm/vc4: Set up the DSI host at pdev probe time, not
+ component bind. bring https://patchwork.kernel.org/patch/9902623/ to Linux
+ 4.14.y
+
+We need the following things to happen in sequence:
+
+DSI host creation
+DSI device creation in the panel driver (needs DSI host)
+DSI device attach from panel to host.
+DSI drm_panel_add()
+DSI encoder creation
+DSI encoder's DRM panel/bridge attach
+
+Unless we allow device creation while the host isn't up yet, we need
+to break the -EPROBE_DEFER deadlock between the panel driver looking
+up the host and the host driver looking up the panel.  We can do so by
+moving the DSI host creation outside of the component bind loop, and
+the panel/bridge lookup/attach into the component bind process.
+---
+ drivers/gpu/drm/vc4/vc4_dsi.c | 93 ++++++++++++++++++++---------------
+ 1 file changed, 53 insertions(+), 40 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
+index 3fa2db18d70f..faf38f17ec26 100644
+--- a/drivers/gpu/drm/vc4/vc4_dsi.c
++++ b/drivers/gpu/drm/vc4/vc4_dsi.c
+@@ -33,6 +33,7 @@
+ #include <drm/drm_crtc_helper.h>
+ #include <drm/drm_edid.h>
+ #include <drm/drm_mipi_dsi.h>
++#include <drm/drm_of.h>
+ #include <drm/drm_panel.h>
+ #include <linux/clk.h>
+ #include <linux/clk-provider.h>
+@@ -504,7 +505,6 @@ struct vc4_dsi {
+ 	struct mipi_dsi_host dsi_host;
+ 	struct drm_encoder *encoder;
+ 	struct drm_bridge *bridge;
+-	bool is_panel_bridge;
+ 
+ 	void __iomem *regs;
+ 
+@@ -1300,7 +1300,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
+ 			       struct mipi_dsi_device *device)
+ {
+ 	struct vc4_dsi *dsi = host_to_dsi(host);
+-	int ret = 0;
+ 
+ 	dsi->lanes = device->lanes;
+ 	dsi->channel = device->channel;
+@@ -1335,33 +1334,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
+ 		return 0;
+ 	}
+ 
+-	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
+-	if (!dsi->bridge) {
+-		struct drm_panel *panel =
+-			of_drm_find_panel(device->dev.of_node);
+-
+-		dsi->bridge = drm_panel_bridge_add(panel,
+-						   DRM_MODE_CONNECTOR_DSI);
+-		if (IS_ERR(dsi->bridge)) {
+-			ret = PTR_ERR(dsi->bridge);
+-			dsi->bridge = NULL;
+-			return ret;
+-		}
+-		dsi->is_panel_bridge = true;
+-	}
+-
+-	return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
++	return 0;
+ }
+ 
+ static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
+ 			       struct mipi_dsi_device *device)
+ {
+-	struct vc4_dsi *dsi = host_to_dsi(host);
+-
+-	if (dsi->is_panel_bridge) {
+-		drm_panel_bridge_remove(dsi->bridge);
+-		dsi->bridge = NULL;
+-	}
+ 
+ 	return 0;
+ }
+@@ -1525,16 +1503,13 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 	struct platform_device *pdev = to_platform_device(dev);
+ 	struct drm_device *drm = dev_get_drvdata(master);
+ 	struct vc4_dev *vc4 = to_vc4_dev(drm);
+-	struct vc4_dsi *dsi;
++	struct vc4_dsi *dsi = dev_get_drvdata(dev);
+ 	struct vc4_dsi_encoder *vc4_dsi_encoder;
++	struct drm_panel *panel;
+ 	const struct of_device_id *match;
+ 	dma_cap_mask_t dma_mask;
+ 	int ret;
+ 
+-	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+-	if (!dsi)
+-		return -ENOMEM;
+-
+ 	match = of_match_device(vc4_dsi_dt_match, dev);
+ 	if (!match)
+ 		return -ENODEV;
+@@ -1549,7 +1524,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 	vc4_dsi_encoder->dsi = dsi;
+ 	dsi->encoder = &vc4_dsi_encoder->base.base;
+ 
+-	dsi->pdev = pdev;
+ 	dsi->regs = vc4_ioremap_regs(pdev, 0);
+ 	if (IS_ERR(dsi->regs))
+ 		return PTR_ERR(dsi->regs);
+@@ -1637,6 +1611,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 		return ret;
+ 	}
+ 
++	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
++					  &panel, &dsi->bridge);
++	if (ret)
++		return ret;
++
++	if (panel) {
++		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
++							DRM_MODE_CONNECTOR_DSI);
++		if (IS_ERR(dsi->bridge))
++			return PTR_ERR(dsi->bridge);
++	}
++
+ 	/* The esc clock rate is supposed to always be 100Mhz. */
+ 	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
+ 	if (ret) {
+@@ -1655,13 +1641,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 			 DRM_MODE_ENCODER_DSI, NULL);
+ 	drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
+ 
+-	dsi->dsi_host.ops = &vc4_dsi_host_ops;
+-	dsi->dsi_host.dev = dev;
+-
+-	mipi_dsi_host_register(&dsi->dsi_host);
+-
+-	dev_set_drvdata(dev, dsi);
+-
+ 	ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
+ 	if (ret) {
+ 		dev_err(dev, "bridge attach failed: %d\n", ret);
+@@ -1672,6 +1651,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ 	 * from our driver, since we need to sequence them within the
+ 	 * encoder's enable/disable paths.
+ 	 */
++
+ 	dsi->encoder->bridge = NULL;
+ 
+ 	pm_runtime_enable(dev);
+@@ -1690,8 +1670,6 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
+ 
+ 	vc4_dsi_encoder_destroy(dsi->encoder);
+ 
+-	mipi_dsi_host_unregister(&dsi->dsi_host);
+-
+ 	if (dsi->port == 1)
+ 		vc4->dsi1 = NULL;
+ }
+@@ -1703,12 +1681,47 @@ static const struct component_ops vc4_dsi_ops = {
+ 
+ static int vc4_dsi_dev_probe(struct platform_device *pdev)
+ {
+-	return component_add(&pdev->dev, &vc4_dsi_ops);
++	struct device *dev = &pdev->dev;
++	struct vc4_dsi *dsi;
++	int ret;
++
++	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
++	if (!dsi)
++		return -ENOMEM;
++	dev_set_drvdata(dev, dsi);
++
++	dsi->pdev = pdev;
++
++	/* Note, the initialization sequence for DSI and panels is
++	 * tricky.  The component bind above won't get past its
++	 * -EPROBE_DEFER until the panel/bridge probes.  The
++	 * panel/bridge will return -EPROBE_DEFER until it has a
++	 * mipi_dsi_host to register its device to.  So, we register
++	 * the host during pdev probe time, so vc4 as a whole can then
++	 * -EPROBE_DEFER its component bind process until the panel
++	 * successfully attaches.
++	 */
++	dsi->dsi_host.ops = &vc4_dsi_host_ops;
++	dsi->dsi_host.dev = dev;
++	mipi_dsi_host_register(&dsi->dsi_host);
++
++	ret = component_add(&pdev->dev, &vc4_dsi_ops);
++	if (ret) {
++		mipi_dsi_host_unregister(&dsi->dsi_host);
++		return ret;
++	}
++
++	return 0;
+ }
+ 
+ static int vc4_dsi_dev_remove(struct platform_device *pdev)
+ {
++	struct device *dev = &pdev->dev;
++	struct vc4_dsi *dsi = dev_get_drvdata(dev);
++
+ 	component_del(&pdev->dev, &vc4_dsi_ops);
++	mipi_dsi_host_unregister(&dsi->dsi_host);
++
+ 	return 0;
+ }
+ 
+-- 
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
new file mode 100644
index 000000000..17c32750b
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
@@ -0,0 +1,418 @@
+From 7f745c7e13b50911424b9bbb4181d4dc72ef155f Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 12:14:41 +0000
+Subject: [PATCH 4/4] drm/panel: Backport 4.15 support for the Raspberry Pi 7"
+ Touchscreen
+
+---
+ .../drm/panel/panel-raspberrypi-touchscreen.c | 242 ++++++++----------
+ 1 file changed, 111 insertions(+), 131 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+index 128523d8d518..2c9c9722734f 100644
+--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
++++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright © 2016 Broadcom
++ * Copyright © 2016-2017 Broadcom
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License version 2 as
+@@ -30,14 +30,15 @@
+  */
+ 
+ /**
+- * DOC: Raspberry Pi 7" touchscreen panel driver.
++ * Raspberry Pi 7" touchscreen panel driver.
+  *
+  * The 7" touchscreen consists of a DPI LCD panel, a Toshiba
+  * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR
+- * controlling power management, the LCD PWM, and the touchscreen.
++ * controlling power management, the LCD PWM, and initial register
++ * setup of the Tohsiba.
+  *
+- * This driver presents this device as a MIPI DSI panel to the DRM
+- * driver, and should expose the touchscreen as a HID device.
++ * This driver controls the TC358762 and ATTINY88, presenting a DSI
++ * device with a drm_panel.
+  */
+ 
+ #include <linux/delay.h>
+@@ -58,10 +59,12 @@
+ #include <drm/drm_mipi_dsi.h>
+ #include <drm/drm_panel.h>
+ 
++#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"
++
+ /* I2C registers of the Atmel microcontroller. */
+ enum REG_ADDR {
+ 	REG_ID = 0x80,
+-	REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip
++	REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */
+ 	REG_PORTB,
+ 	REG_PORTC,
+ 	REG_PORTD,
+@@ -81,9 +84,6 @@ enum REG_ADDR {
+ 	REG_ID2,
+ };
+ 
+-/* We only turn the PWM on or off, without varying values. */
+-#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1
+-
+ /* DSI D-PHY Layer Registers */
+ #define D0W_DPHYCONTTX		0x0004
+ #define CLW_DPHYCONTRX		0x0020
+@@ -100,8 +100,6 @@ enum REG_ADDR {
+ #define PPI_BUSYPPI		0x0108
+ #define PPI_LINEINITCNT		0x0110
+ #define PPI_LPTXTIMECNT		0x0114
+-//#define PPI_LANEENABLE		0x0134
+-//#define PPI_TX_RX_TA		0x013C
+ #define PPI_CLS_ATMR		0x0140
+ #define PPI_D0S_ATMR		0x0144
+ #define PPI_D1S_ATMR		0x0148
+@@ -197,43 +195,23 @@ enum REG_ADDR {
+ struct rpi_touchscreen {
+ 	struct drm_panel base;
+ 	struct mipi_dsi_device *dsi;
+-	struct i2c_client *bridge_i2c;
+-
+-	/* Version of the firmware on the bridge chip */
+-	int atmel_ver;
++	struct i2c_client *i2c;
+ };
+ 
+ static const struct drm_display_mode rpi_touchscreen_modes[] = {
+ 	{
+-		/* The DSI PLL can only integer divide from the 2Ghz
+-		 * PLLD, giving us few choices.  We pick a divide by 3
+-		 * as our DSI HS clock, giving us a pixel clock of
+-		 * that divided by 24 bits.  Pad out HFP to get our
+-		 * panel to refresh at 60Hz, even if that doesn't
+-		 * match the datasheet.
+-		 */
+-#define PIXEL_CLOCK ((2000000000 / 3) / 24)
+-#define VREFRESH    60
+-#define VTOTAL      (480 + 7 + 2 + 21)
+-#define HACT        800
+-#define HSW         2
+-#define HBP         46
+-#define HFP         ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP))
+-
+-		/* Round up the pixel clock a bit (10khz), so that the
+-		 * "don't run things faster than the requested clock
+-		 * rate" rule of the clk driver doesn't reject the
+-		 * divide-by-3 mode due to rounding error.
++		/* Modeline comes from the Raspberry Pi firmware, with HFP=1
++		 * plugged in and clock re-computed from that.
+ 		 */
+-		.clock = PIXEL_CLOCK / 1000 + 10,
+-		.hdisplay = HACT,
+-		.hsync_start = HACT + HFP,
+-		.hsync_end = HACT + HFP + HSW,
+-		.htotal = HACT + HFP + HSW + HBP,
++		.clock = 25979400 / 1000,
++		.hdisplay = 800,
++		.hsync_start = 800 + 1,
++		.hsync_end = 800 + 1 + 2,
++		.htotal = 800 + 1 + 2 + 46,
+ 		.vdisplay = 480,
+ 		.vsync_start = 480 + 7,
+ 		.vsync_end = 480 + 7 + 2,
+-		.vtotal = VTOTAL,
++		.vtotal = 480 + 7 + 2 + 21,
+ 		.vrefresh = 60,
+ 	},
+ };
+@@ -245,7 +223,7 @@ static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel)
+ 
+ static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
+ {
+-	return i2c_smbus_read_byte_data(ts->bridge_i2c, reg);
++	return i2c_smbus_read_byte_data(ts->i2c, reg);
+ }
+ 
+ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
+@@ -253,19 +231,13 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
+ {
+ 	int ret;
+ 
+-	ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val);
++	ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
+ 	if (ret)
+ 		dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+ }
+ 
+ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
+ {
+-#if 0
+-	/* The firmware uses LP DSI transactions like this to bring up
+-	 * the hardware, which should be faster than using I2C to then
+-	 * pass to the Toshiba.  However, I was unable to get it to
+-	 * work.
+-	 */
+ 	u8 msg[] = {
+ 		reg,
+ 		reg >> 8,
+@@ -275,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
+ 		val >> 24,
+ 	};
+ 
+-	mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg));
+-#else
+-	rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8);
+-	rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg);
+-	rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8);
+-	rpi_touchscreen_i2c_write(ts, REG_WRITEL, val);
+-#endif
++	mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg));
+ 
+ 	return 0;
+ }
+@@ -317,8 +283,7 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
+ 
+ 	rpi_touchscreen_write(ts, DSI_LANEENABLE,
+ 			      DSI_LANEENABLE_CLOCK |
+-			      DSI_LANEENABLE_D0 |
+-			      (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0));
++			      DSI_LANEENABLE_D0);
+ 	rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05);
+ 	rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05);
+ 	rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00);
+@@ -352,6 +317,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
+ 	struct drm_connector *connector = panel->connector;
+ 	struct drm_device *drm = panel->drm;
+ 	unsigned int i, num = 0;
++	static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ 
+ 	for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) {
+ 		const struct drm_display_mode *m = &rpi_touchscreen_modes[i];
+@@ -378,6 +344,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
+ 	connector->display_info.bpc = 8;
+ 	connector->display_info.width_mm = 154;
+ 	connector->display_info.height_mm = 86;
++	drm_display_info_set_bus_formats(&connector->display_info,
++					 &bus_format, 1);
+ 
+ 	return num;
+ }
+@@ -390,51 +358,27 @@ static const struct drm_panel_funcs rpi_touchscreen_funcs = {
+ 	.get_modes = rpi_touchscreen_get_modes,
+ };
+ 
+-static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev,
+-						  const char *name)
+-{
+-	struct device_node *node;
+-	struct i2c_client *client;
+-
+-	node = of_parse_phandle(dev->of_node, name, 0);
+-	if (!node)
+-		return ERR_PTR(-ENODEV);
+-
+-	client = of_find_i2c_device_by_node(node);
+-
+-	of_node_put(node);
+-
+-	if (!client)
+-		return ERR_PTR(-EPROBE_DEFER);
+-
+-	return client;
+-}
+-
+-static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_probe(struct i2c_client *i2c,
++				 const struct i2c_device_id *id)
+ {
+-	struct device *dev = &dsi->dev;
++	struct device *dev = &i2c->dev;
+ 	struct rpi_touchscreen *ts;
++	struct device_node *endpoint, *dsi_host_node;
++	struct mipi_dsi_host *host;
+ 	int ret, ver;
++	struct mipi_dsi_device_info info = {
++		.type = RPI_DSI_DRIVER_NAME,
++		.channel = 0,
++		.node = NULL,
++	};
+ 
+ 	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ 	if (!ts)
+ 		return -ENOMEM;
+ 
+-	dev_set_drvdata(dev, ts);
++	i2c_set_clientdata(i2c, ts);
+ 
+-	ts->dsi = dsi;
+-	dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
+-			   MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+-			   MIPI_DSI_MODE_LPM);
+-	dsi->format = MIPI_DSI_FMT_RGB888;
+-	dsi->lanes = 1;
+-
+-	ts->bridge_i2c =
+-		rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge");
+-	if (IS_ERR(ts->bridge_i2c)) {
+-		ret = -EPROBE_DEFER;
+-		return ret;
+-	}
++	ts->i2c = i2c;
+ 
+ 	ver = rpi_touchscreen_i2c_read(ts, REG_ID);
+ 	if (ver < 0) {
+@@ -443,11 +387,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ 	}
+ 
+ 	switch (ver) {
+-	case 0xde:
+-		ts->atmel_ver = 1;
+-		break;
+-	case 0xc3:
+-		ts->atmel_ver = 2;
++	case 0xde: /* ver 1 */
++	case 0xc3: /* ver 2 */
+ 		break;
+ 	default:
+ 		dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
+@@ -457,65 +398,104 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ 	/* Turn off at boot, so we can cleanly sequence powering on. */
+ 	rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
+ 
+-	drm_panel_init(&ts->base);
++	/* Look up the DSI host.  It needs to probe before we do. */
++	endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
++	dsi_host_node = of_graph_get_remote_port_parent(endpoint);
++	host = of_find_mipi_dsi_host_by_node(dsi_host_node);
++	of_node_put(dsi_host_node);
++	if (!host) {
++		of_node_put(endpoint);
++		return -EPROBE_DEFER;
++	}
++
++	info.node = of_graph_get_remote_port(endpoint);
++	of_node_put(endpoint);
++
++	ts->dsi = mipi_dsi_device_register_full(host, &info);
++	if (IS_ERR(ts->dsi)) {
++		dev_err(dev, "DSI device registration failed: %ld\n",
++			PTR_ERR(ts->dsi));
++		return PTR_ERR(ts->dsi);
++	}
++
+ 	ts->base.dev = dev;
+ 	ts->base.funcs = &rpi_touchscreen_funcs;
+ 
++	/* This appears last, as it's what will unblock the DSI host
++	 * driver's component bind function.
++	 */
+ 	ret = drm_panel_add(&ts->base);
+-	if (ret < 0)
+-		goto err_release_bridge;
+-
+-	return mipi_dsi_attach(dsi);
++	if (ret)
++		return ret;
+ 
+-err_release_bridge:
+-	put_device(&ts->bridge_i2c->dev);
+-	return ret;
++	return 0;
+ }
+ 
+-static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_remove(struct i2c_client *i2c)
+ {
+-	struct device *dev = &dsi->dev;
+-	struct rpi_touchscreen *ts = dev_get_drvdata(dev);
+-	int ret;
++	struct rpi_touchscreen *ts = i2c_get_clientdata(i2c);
+ 
+-	ret = mipi_dsi_detach(dsi);
+-	if (ret < 0) {
+-		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+-		return ret;
+-	}
++	mipi_dsi_detach(ts->dsi);
+ 
+-	drm_panel_detach(&ts->base);
+ 	drm_panel_remove(&ts->base);
+ 
+-	put_device(&ts->bridge_i2c->dev);
++	mipi_dsi_device_unregister(ts->dsi);
++	kfree(ts->dsi);
+ 
+ 	return 0;
+ }
+ 
+-static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ {
+-	struct device *dev = &dsi->dev;
+-	struct rpi_touchscreen *ts = dev_get_drvdata(dev);
++	int ret;
+ 
+-	rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
++	dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
++			   MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
++			   MIPI_DSI_MODE_LPM);
++	dsi->format = MIPI_DSI_FMT_RGB888;
++	dsi->lanes = 1;
++
++	ret = mipi_dsi_attach(dsi);
++
++	if (ret)
++		dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
++
++	return ret;
+ }
+ 
+-static const struct of_device_id rpi_touchscreen_of_match[] = {
+-	{ .compatible = "raspberrypi,touchscreen" },
++static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = {
++	.driver.name = RPI_DSI_DRIVER_NAME,
++	.probe = rpi_touchscreen_dsi_probe,
++};
++
++static const struct of_device_id rpi_touchscreen_of_ids[] = {
++	{ .compatible = "raspberrypi,7inch-touchscreen-panel" },
+ 	{ } /* sentinel */
+ };
+-MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match);
++MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids);
+ 
+-static struct mipi_dsi_driver rpi_touchscreen_driver = {
++static struct i2c_driver rpi_touchscreen_driver = {
+ 	.driver = {
+-		.name = "raspberrypi-touchscreen",
+-		.of_match_table = rpi_touchscreen_of_match,
++		.name = "rpi_touchscreen",
++		.of_match_table = rpi_touchscreen_of_ids,
+ 	},
+-	.probe = rpi_touchscreen_dsi_probe,
+-	.remove = rpi_touchscreen_dsi_remove,
+-	.shutdown = rpi_touchscreen_dsi_shutdown,
++	.probe = rpi_touchscreen_probe,
++	.remove = rpi_touchscreen_remove,
+ };
+-module_mipi_dsi_driver(rpi_touchscreen_driver);
++
++static int __init rpi_touchscreen_init(void)
++{
++	mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver);
++	return i2c_add_driver(&rpi_touchscreen_driver);
++}
++module_init(rpi_touchscreen_init);
++
++static void __exit rpi_touchscreen_exit(void)
++{
++	i2c_del_driver(&rpi_touchscreen_driver);
++	mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver);
++}
++module_exit(rpi_touchscreen_exit);
+ 
+ MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+ MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver");
+-- 
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
index 4271926e4..ffbf791e8 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
@@ -3,6 +3,15 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
 require recipes-kernel/linux/linux-agl.inc
 require recipes-kernel/linux/linux-agl-4.14.inc
 
+# ENABLE DSI
+# ported from https://github.com/k-quigley/linux
+SRC_URI_append = " \
+    file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \
+    file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \
+    file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \
+    file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \
+"
+
 # NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated
 #       to newer than 4.14.104 to avoid lttng-modules failing to build.
 SRC_URI_append = "\