SPEC-3723: restructure meta-agl

Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.

v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
    due to dependency on meta-oe, moved -test packagegroup and -qa images
      to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
    move app f/w specific changes to bbappends in meta-app-framework and
    only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend

Description:

This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.

The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
   have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
   construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer

Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.

Bug-AGL: SPEC-3723

Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769

1 files changed, 0 insertions, 772 deletions

diff --git a/meta-agl-profile-graphical-qt5/recipes-qt/qt5/qtwayland/0019-xdg-shell-upgrade-to-support-current-version-weston-.patch b/meta-agl-profile-graphical-qt5/recipes-qt/qt5/qtwayland/0019-xdg-shell-upgrade-to-support-current-version-weston-.patch
deleted file mode 100644
index 8f0425a76..000000000
--- a/meta-agl-profile-graphical-qt5/recipes-qt/qt5/qtwayland/0019-xdg-shell-upgrade-to-support-current-version-weston-.patch
+++ /dev/null
@@ -1,772 +0,0 @@
-From c4219cca0febd7119e0bec776fdc2877b3448e0b Mon Sep 17 00:00:00 2001
-From: Philippe Coval <philippe.coval@open.eurogiciel.org>
-Date: Tue, 10 Jun 2014 16:22:17 +0200
-Subject: [PATCH 19/21] xdg-shell: upgrade to support current version
- (weston-1.5.0)
-
-The protocol file is a raw copy of
-
-Source: http://cgit.freedesktop.org/wayland/weston/plain/protocol/xdg-shell.xml?id=1.5.0
-
-Task-number: QTBUG-38633/related
-Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com>
-Reviewed-by: Philippe Coval <rzr@gna.org>
-Origin: https://www.qt.gitorious.org/qt/qtwayland/commit/4bac130b97fbaa565aa9883eb302557ef0185d50
-Change-Id: I41ca2f89c09a8b6348ce2fbf6d59f44b4c81ffff
----
- src/3rdparty/protocol/xdg-shell.xml | 288 ++++++++++++++++++------------------
- src/client/client.pro               |   2 +
- src/client/qwaylanddisplay.cpp      |  10 +-
- src/client/qwaylanddisplay_p.h      |   5 +-
- src/client/qwaylandxdgshell.cpp     |  77 ++++++++++
- src/client/qwaylandxdgshell_p.h     |  73 +++++++++
- src/client/qwaylandxdgsurface.cpp   |  60 ++++++--
- src/client/qwaylandxdgsurface_p.h   |  11 +-
- 8 files changed, 364 insertions(+), 162 deletions(-)
- create mode 100644 src/client/qwaylandxdgshell.cpp
- create mode 100644 src/client/qwaylandxdgshell_p.h
-
-diff --git a/src/3rdparty/protocol/xdg-shell.xml b/src/3rdparty/protocol/xdg-shell.xml
-index 4e5cff8..79a2831 100644
---- a/src/3rdparty/protocol/xdg-shell.xml
-+++ b/src/3rdparty/protocol/xdg-shell.xml
-@@ -40,19 +40,22 @@
- 
-     <enum name="version">
-       <description summary="latest protocol version">
--	Use this enum to check the protocol version, and it will be updated
--	automatically.
-+	The 'current' member of this enum gives the version of the
-+	protocol.  Implementations can compare this to the version
-+	they implement using static_assert to ensure the protocol and
-+	implementation versions match.
-       </description>
--      <entry name="current" value="1" summary="Always the latest version"/>
-+      <entry name="current" value="3" summary="Always the latest version"/>
-     </enum>
- 
- 
-     <request name="use_unstable_version">
-       <description summary="enable use of this unstable version">
--	Use this request in order to enable use of this interface.
--
--	Understand and agree that one is using an unstable interface,
--	that will likely change in the future, breaking the API.
-+	Negotiate the unstable version of the interface.  This
-+	mechanism is in place to ensure client and server agree on the
-+	unstable versions of the protocol that they speak or exit
-+	cleanly if they don't agree.  This request will go away once
-+	the xdg-shell protocol is stable.
-       </description>
-       <arg name="version" type="int"/>
-     </request>
-@@ -84,6 +87,28 @@
-       <arg name="y" type="int"/>
-       <arg name="flags" type="uint"/>
-     </request>
-+
-+    <event name="ping">
-+      <description summary="check if the client is alive">
-+        The ping event asks the client if it's still alive. Pass the
-+        serial specified in the event back to the compositor by sending
-+        a "pong" request back with the specified serial.
-+
-+        Compositors can use this to determine if the client is still
-+        alive. It's unspecified what will happen if the client doesn't
-+        respond to the ping request, or in what timeframe. Clients should
-+        try to respond in a reasonable amount of time.
-+      </description>
-+      <arg name="serial" type="uint" summary="pass this to the callback"/>
-+    </event>
-+
-+    <request name="pong">
-+      <description summary="respond to a ping event">
-+	A client must respond to a ping event with a pong request or
-+	the client may be deemed unresponsive.
-+      </description>
-+      <arg name="serial" type="uint" summary="serial of the ping event"/>
-+    </request>
-   </interface>
- 
-   <interface name="xdg_surface" version="1">
-@@ -124,6 +149,32 @@
-       <arg name="parent" type="object" interface="wl_surface" allow-null="true"/>
-     </request>
- 
-+    <request name="set_margin">
-+      <description summary="set the visible frame boundaries">
-+        This tells the compositor what the visible size of the window
-+        should be, so it can use it to determine what borders to use for
-+        constrainment and alignment.
-+
-+        CSD often has invisible areas for decoration purposes, like drop
-+        shadows. These "shadow" drawings need to be subtracted out of the
-+        normal boundaries of the window when computing where to place
-+        windows (e.g. to set this window so it's centered on top of another,
-+        or to put it to the left or right of the screen.)
-+
-+        This value should change as little as possible at runtime, to
-+        prevent flicker.
-+
-+        This value is also ignored when the window is maximized or
-+        fullscreen, and assumed to be 0.
-+
-+        If never called, this value is assumed to be 0.
-+      </description>
-+      <arg name="left_margin" type="int"/>
-+      <arg name="right_margin" type="int"/>
-+      <arg name="top_margin" type="int"/>
-+      <arg name="bottom_margin" type="int"/>
-+    </request>
-+
-     <request name="set_title">
-       <description summary="set surface title">
- 	Set a short title for the surface.
-@@ -150,22 +201,6 @@
-       <arg name="app_id" type="string"/>
-     </request>
- 
--    <request name="pong">
--      <description summary="respond to a ping event">
--	A client must respond to a ping event with a pong request or
--	the client may be deemed unresponsive.
--      </description>
--      <arg name="serial" type="uint" summary="serial of the ping event"/>
--    </request>
--
--    <event name="ping">
--      <description summary="ping client">
--	Ping a client to check if it is receiving events and sending
--	requests. A client is expected to reply with a pong request.
--      </description>
--      <arg name="serial" type="uint"/>
--    </event>
--
-     <request name="move">
-       <description summary="start an interactive move">
- 	Start a pointer-driven move of the surface.
-@@ -217,12 +252,6 @@
- 	ignore it if it doesn't resize, pick a smaller size (to
- 	satisfy aspect ratio or resize in steps of NxM pixels).
- 
--	The edges parameter provides a hint about how the surface
--	was resized. The client may use this information to decide
--	how to adjust its content to the new size (e.g. a scrolling
--	area might adjust its content position to leave the viewable
--	content unmoved). Valid edge values are from resize_edge enum.
--
- 	The client is free to dismiss all but the last configure
- 	event it received.
- 
-@@ -230,7 +259,6 @@
- 	in surface local coordinates.
-       </description>
- 
--      <arg name="edges" type="uint"/>
-       <arg name="width" type="int"/>
-       <arg name="height" type="int"/>
-     </event>
-@@ -250,128 +278,122 @@
-       <arg name="output" type="object" interface="wl_output" allow-null="true"/>
-     </request>
- 
--    <event name="request_set_fullscreen">
--      <description summary="server requests that the client set fullscreen">
--	Event sent from the compositor to the client requesting that the client
--	goes to a fullscreen state. It's the client job to call set_fullscreen
--	and really trigger the fullscreen state.
--      </description>
--    </event>
--
--    <event name="request_unset_fullscreen">
--      <description summary="server requests that the client unset fullscreen">
--	Event sent from the compositor to the client requesting that the client
--	leaves the fullscreen state. It's the client job to call
--	unset_fullscreen and really leave the fullscreen state.
--      </description>
--    </event>
-+    <enum name="state">
-+      <description summary="types of state on the surface">
-+        The different state values used on the surface. This is designed for
-+        state values like maximized, fullscreen. It is paired with the
-+        request_change_state event to ensure that both the client and the
-+        compositor setting the state can be synchronized.
- 
--    <request name="set_fullscreen">
--      <description summary="set the surface state as fullscreen">
--	Set the surface as fullscreen.
-+        States set in this way are double-buffered. They will get applied on
-+        the next commit.
- 
--	After this request, the compositor should send a configure event
--	informing the output size.
-+        Desktop environments may extend this enum by taking up a range of
-+        values and documenting the range they chose in this description.
-+        They are not required to document the values for the range that they
-+        chose. Ideally, any good extensions from a desktop environment should
-+        make its way into standardization into this enum.
- 
--	This request informs the compositor that the next attached buffer
--	committed will be in a fullscreen state. The buffer size should be the
--	same size as the size informed in the configure event, if the client
--	doesn't want to leave any empty area.
-+        The current reserved ranges are:
- 
--	In other words: the next attached buffer after set_maximized is the new
--	maximized buffer. And the surface will be positioned at the maximized
--	position on commit.
--
--	A simple way to synchronize and wait for the correct configure event is
--	to use a wl_display.sync request right after the set_fullscreen
--	request. When the sync callback returns, the last configure event
--	received just before it will be the correct one, and should contain the
--	right size for the surface to maximize.
--
--	Setting one state won't unset another state. Use
--	xdg_surface.unset_fullscreen for unsetting it.
-+        0x0000 - 0x0FFF: xdg-shell core values, documented below.
-+        0x1000 - 0x1FFF: GNOME
-       </description>
--    </request>
-+      <entry name="maximized" value="1" summary="the surface is maximized">
-+        A non-zero value indicates the surface is maximized. Otherwise,
-+        the surface is unmaximized.
-+      </entry>
-+      <entry name="fullscreen" value="2" summary="the surface is fullscreen">
-+        A non-zero value indicates the surface is fullscreen. Otherwise,
-+        the surface is not fullscreen.
-+      </entry>
-+    </enum>
- 
--    <request name="unset_fullscreen">
--      <description summary="unset the surface state as fullscreen">
--	Unset the surface fullscreen state.
-+    <request name="request_change_state">
-+      <description summary="client requests to change a surface's state">
-+        This asks the compositor to change the state. If the compositor wants
-+        to change the state, it will send a change_state event with the same
-+        state_type, value, and serial, and the event flow continues as if it
-+        it was initiated by the compositor.
- 
--	Same negotiation as set_fullscreen must be used.
-+        If the compositor does not want to change the state, it will send a
-+        change_state to the client with the old value of the state.
-       </description>
-+      <arg name="state_type" type="uint" summary="the state to set"/>
-+      <arg name="value" type="uint" summary="the value to change the state to"/>
-+      <arg name="serial" type="uint" summary="an event serial">
-+        This serial is so the client can know which change_state event corresponds
-+        to which request_change_state request it sent out.
-+      </arg>
-     </request>
- 
--    <event name="request_set_maximized">
--      <description summary="server requests that the client set maximized">
--	Event sent from the compositor to the client requesting that the client
--	goes to a maximized state. It's the client job to call set_maximized
--	and really trigger the maximized state.
-+    <event name="change_state">
-+      <description summary="compositor wants to change a surface's state">
-+        This event tells the client to change a surface's state. The client
-+        should respond with an ack_change_state request to the compositor to
-+        guarantee that the compositor knows that the client has seen it.
-       </description>
--    </event>
- 
--    <event name="request_unset_maximized">
--      <description summary="server requests that the client unset maximized">
--	Event sent from the compositor to the client requesting that the client
--	leaves the maximized state. It's the client job to call unset_maximized
--	and really leave the maximized state.
--      </description>
-+      <arg name="state_type" type="uint" summary="the state to set"/>
-+      <arg name="value" type="uint" summary="the value to change the state to"/>
-+      <arg name="serial" type="uint" summary="a serial for the compositor's own tracking"/>
-     </event>
- 
--    <request name="set_maximized">
--      <description summary="set the surface state as maximized">
--	Set the surface as maximized.
--
--	After this request, the compositor will send a configure event
--	informing the output size minus panel and other MW decorations.
--
--	This request informs the compositor that the next attached buffer
--	committed will be in a maximized state. The buffer size should be the
--	same size as the size informed in the configure event, if the client
--	doesn't want to leave any empty area.
-+    <request name="ack_change_state">
-+      <description summary="ack a change_state event">
-+        When a change_state event is received, a client should then ack it
-+        using the ack_change_state request to ensure that the compositor
-+        knows the client has seen the event.
- 
--	In other words: the next attached buffer after set_maximized is the new
--	maximized buffer. And the surface will be positioned at the maximized
--	position on commit.
-+        By this point, the state is confirmed, and the next attach should
-+        contain the buffer drawn for the new state value.
- 
--	A simple way to synchronize and wait for the correct configure event is
--	to use a wl_display.sync request right after the set_maximized request.
--	When the sync callback returns, the last configure event received just
--	before it will be the correct one, and should contain the right size
--	for the surface to maximize.
--
--	Setting one state won't unset another state. Use
--	xdg_surface.unset_maximized for unsetting it.
-+        The values here need to be the same as the values in the cooresponding
-+        change_state event.
-       </description>
-+      <arg name="state_type" type="uint" summary="the state to set"/>
-+      <arg name="value" type="uint" summary="the value to change the state to"/>
-+      <arg name="serial" type="uint" summary="a serial to pass to change_state"/>
-     </request>
- 
--    <request name="unset_maximized">
--      <description summary="unset the surface state as maximized">
--	Unset the surface maximized state.
--
--	Same negotiation as set_maximized must be used.
-+    <request name="set_minimized">
-+      <description summary="minimize the surface">
-+        Minimize the surface.
-       </description>
-     </request>
- 
--    <request name="set_minimized">
--      <description summary="set the surface state as minimized">
--	Set the surface minimized state.
--
--	Setting one state won't unset another state.
-+    <event name="activated">
-+      <description summary="surface was activated">
-+	The activated_set event is sent when this surface has been
-+	activated, which means that the surface has user attention.
-+        Window decorations should be updated accordingly. You should
-+        not use this event for anything but the style of decorations
-+        you display, use wl_keyboard.enter and wl_keyboard.leave for
-+        determining keyboard focus.
-       </description>
--    </request>
-+    </event>
- 
--    <event name="focused_set">
--      <description summary="surface was focused">
--	The focused_set event is sent when this surface has been
--	activated. Window decorations should be updated accordingly.
-+    <event name="deactivated">
-+      <description summary="surface was deactivated">
-+	The deactivate event is sent when this surface has been
-+        deactivated, which means that the surface lost user attention.
-+        Window decorations should be updated accordingly. You should
-+        not use this event for anything but the style of decorations
-+        you display, use wl_keyboard.enter and wl_keyboard.leave for
-+        determining keyboard focus.
-       </description>
-     </event>
- 
--    <event name="focused_unset">
--      <description summary="surface was unfocused">
--	The focused_unset event is sent when this surface has been
--	deactivated, because another surface has been activated. Window
--	decorations should be updated accordingly.
-+    <event name="close">
-+      <description summary="surface wants to be closed">
-+        The close event is sent by the compositor when the user
-+        wants the surface to be closed. This should be equivalent to
-+        the user clicking the close button in client-side decorations,
-+        if your application has any...
-+
-+        This is only a request that the user intends to close your
-+        window. The client may choose to ignore this request, or show
-+        a dialog to ask the user to save their data...
-       </description>
-     </event>
-   </interface>
-@@ -409,22 +431,6 @@
-       </description>
-     </request>
- 
--    <request name="pong">
--      <description summary="respond to a ping event">
--	A client must respond to a ping event with a pong request or
--	the client may be deemed unresponsive.
--      </description>
--      <arg name="serial" type="uint" summary="serial of the ping event"/>
--    </request>
--
--    <event name="ping">
--      <description summary="ping client">
--	Ping a client to check if it is receiving events and sending
--	requests. A client is expected to reply with a pong request.
--      </description>
--      <arg name="serial" type="uint"/>
--    </event>
--
-     <event name="popup_done">
-       <description summary="popup interaction is done">
- 	The popup_done event is sent out when a popup grab is broken,
-diff --git a/src/client/client.pro b/src/client/client.pro
-index 9ecf82f..73e3b7f 100644
---- a/src/client/client.pro
-+++ b/src/client/client.pro
-@@ -59,6 +59,7 @@ SOURCES +=  qwaylandintegration.cpp \
-             qwaylanddatasource.cpp \
-             qwaylandshellsurface.cpp \
-             qwaylandwlshellsurface.cpp \
-+            qwaylandxdgshell.cpp \
-             qwaylandxdgsurface.cpp \
-             qwaylandextendedoutput.cpp \
-             qwaylandextendedsurface.cpp \
-@@ -89,6 +90,7 @@ HEADERS +=  qwaylandintegration_p.h \
-             qwaylanddatasource_p.h \
-             qwaylandshellsurface_p.h \
-             qwaylandwlshellsurface_p.h \
-+            qwaylandxdgshell_p.h \
-             qwaylandxdgsurface_p.h \
-             qwaylandextendedoutput_p.h \
-             qwaylandextendedsurface_p.h \
-diff --git a/src/client/qwaylanddisplay.cpp b/src/client/qwaylanddisplay.cpp
-index 7f953ad..2e25672 100644
---- a/src/client/qwaylanddisplay.cpp
-+++ b/src/client/qwaylanddisplay.cpp
-@@ -50,7 +50,7 @@
- #include "qwaylandclipboard_p.h"
- #include "qwaylanddatadevicemanager_p.h"
- #include "qwaylandhardwareintegration_p.h"
--
-+#include "qwaylandxdgshell_p.h"
- 
- #include "qwaylandwindowmanagerintegration_p.h"
- 
-@@ -209,8 +209,7 @@ void QWaylandDisplay::registry_global(uint32_t id, const QString &interface, uin
-         mShm = static_cast<struct wl_shm *>(wl_registry_bind(registry, id, &wl_shm_interface,1));
-     } else if (interface == QStringLiteral("xdg_shell")
-                && qEnvironmentVariableIsSet("QT_WAYLAND_USE_XDG_SHELL")) {
--        mShellXdg.reset(new QtWayland::xdg_shell(registry, id));
--        mShellXdg->use_unstable_version(QtWayland::xdg_shell::version_current);
-+        mShellXdg.reset(new QWaylandXdgShell(registry,id));
-     } else if (interface == QStringLiteral("wl_shell")){
-         mShell.reset(new QtWayland::wl_shell(registry, id));
-     } else if (interface == QStringLiteral("wl_seat")) {
-@@ -275,4 +274,9 @@ void QWaylandDisplay::forceRoundTrip()
-     wl_display_roundtrip(mDisplay);
- }
- 
-+QtWayland::xdg_shell *QWaylandDisplay::shellXdg()
-+{
-+    return mShellXdg.data();
-+}
-+
- QT_END_NAMESPACE
-diff --git a/src/client/qwaylanddisplay_p.h b/src/client/qwaylanddisplay_p.h
-index cf5dfc2..f1b35a7 100644
---- a/src/client/qwaylanddisplay_p.h
-+++ b/src/client/qwaylanddisplay_p.h
-@@ -72,6 +72,7 @@ class QWaylandWindow;
- class QWaylandEventThread;
- class QWaylandIntegration;
- class QWaylandHardwareIntegration;
-+class QWaylandXdgShell;
- 
- namespace QtWayland {
-     class qt_output_extension;
-@@ -115,7 +116,7 @@ public:
-     QtWayland::wl_compositor *compositor() { return &mCompositor; }
- 
-     QtWayland::wl_shell *shell() { return mShell.data(); }
--    QtWayland::xdg_shell *shellXdg() { return mShellXdg.data(); }
-+    QtWayland::xdg_shell *shellXdg();
- 
-     QList<QWaylandInputDevice *> inputDevices() const { return mInputDevices; }
-     QWaylandInputDevice *defaultInputDevice() const;
-@@ -171,7 +172,7 @@ private:
-     QThread *mEventThread;
-     QWaylandEventThread *mEventThreadObject;
-     QScopedPointer<QtWayland::wl_shell> mShell;
--    QScopedPointer<QtWayland::xdg_shell> mShellXdg;
-+    QScopedPointer<QWaylandXdgShell> mShellXdg;
-     QList<QPlatformScreen *> mScreens;
-     QList<QWaylandInputDevice *> mInputDevices;
-     QList<Listener> mRegistryListeners;
-diff --git a/src/client/qwaylandxdgshell.cpp b/src/client/qwaylandxdgshell.cpp
-new file mode 100644
-index 0000000..eb9f91c
---- /dev/null
-+++ b/src/client/qwaylandxdgshell.cpp
-@@ -0,0 +1,77 @@
-+/****************************************************************************
-+**
-+** Copyright (C) 2014 Eurogiciel, author: <philippe.coval@eurogiciel.fr>
-+** Contact: http://www.qt-project.org/legal
-+**
-+** This file is part of the config.tests of the Qt Toolkit.
-+**
-+** $QT_BEGIN_LICENSE:LGPL$
-+** Commercial License Usage
-+** Licensees holding valid commercial Qt licenses may use this file in
-+** accordance with the commercial license agreement provided with the
-+** Software or, alternatively, in accordance with the terms contained in
-+** a written agreement between you and Digia.  For licensing terms and
-+** conditions see http://qt.digia.com/licensing.  For further information
-+** use the contact form at http://qt.digia.com/contact-us.
-+**
-+** GNU Lesser General Public License Usage
-+** Alternatively, this file may be used under the terms of the GNU Lesser
-+** General Public License version 2.1 as published by the Free Software
-+** Foundation and appearing in the file LICENSE.LGPL included in the
-+** packaging of this file.  Please review the following information to
-+** ensure the GNU Lesser General Public License version 2.1 requirements
-+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-+**
-+** In addition, as a special exception, Digia gives you certain additional
-+** rights.  These rights are described in the Digia Qt LGPL Exception
-+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-+**
-+** GNU General Public License Usage
-+** Alternatively, this file may be used under the terms of the GNU
-+** General Public License version 3.0 as published by the Free Software
-+** Foundation and appearing in the file LICENSE.GPL included in the
-+** packaging of this file.  Please review the following information to
-+** ensure the GNU General Public License version 3.0 requirements will be
-+** met: http://www.gnu.org/copyleft/gpl.html.
-+**
-+**
-+** $QT_END_LICENSE$
-+**
-+****************************************************************************/
-+
-+#include "qwaylandxdgshell_p.h"
-+
-+#include "qwaylanddisplay_p.h"
-+#include "qwaylandwindow_p.h"
-+#include "qwaylandinputdevice_p.h"
-+#include "qwaylanddecoration_p.h"
-+#include "qwaylandscreen_p.h"
-+
-+#include <QtCore/QDebug>
-+
-+QT_BEGIN_NAMESPACE
-+
-+QWaylandXdgShell::QWaylandXdgShell(struct ::xdg_shell *shell)
-+    : QtWayland::xdg_shell(shell)
-+{
-+}
-+
-+QWaylandXdgShell::QWaylandXdgShell(struct ::wl_registry *registry, uint32_t id)
-+    : QtWayland::xdg_shell(registry, id)
-+{
-+    use_unstable_version(QtWayland::xdg_shell::version_current);
-+}
-+
-+QWaylandXdgShell::~QWaylandXdgShell()
-+{
-+    xdg_shell_destroy(object());
-+}
-+
-+
-+void QWaylandXdgShell::xdg_shell_ping(uint32_t serial)
-+{
-+    pong(serial);
-+}
-+
-+
-+QT_END_NAMESPACE
-diff --git a/src/client/qwaylandxdgshell_p.h b/src/client/qwaylandxdgshell_p.h
-new file mode 100644
-index 0000000..6a396bd
---- /dev/null
-+++ b/src/client/qwaylandxdgshell_p.h
-@@ -0,0 +1,73 @@
-+/****************************************************************************
-+**
-+** Copyright (C) 2014 Eurogiciel, author: <philippe.coval@eurogiciel.fr>
-+** Contact: http://www.qt-project.org/legal
-+**
-+** This file is part of the config.tests of the Qt Toolkit.
-+**
-+** $QT_BEGIN_LICENSE:LGPL$
-+** Commercial License Usage
-+** Licensees holding valid commercial Qt licenses may use this file in
-+** accordance with the commercial license agreement provided with the
-+** Software or, alternatively, in accordance with the terms contained in
-+** a written agreement between you and Digia.  For licensing terms and
-+** conditions see http://qt.digia.com/licensing.  For further information
-+** use the contact form at http://qt.digia.com/contact-us.
-+**
-+** GNU Lesser General Public License Usage
-+** Alternatively, this file may be used under the terms of the GNU Lesser
-+** General Public License version 2.1 as published by the Free Software
-+** Foundation and appearing in the file LICENSE.LGPL included in the
-+** packaging of this file.  Please review the following information to
-+** ensure the GNU Lesser General Public License version 2.1 requirements
-+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-+**
-+** In addition, as a special exception, Digia gives you certain additional
-+** rights.  These rights are described in the Digia Qt LGPL Exception
-+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-+**
-+** GNU General Public License Usage
-+** Alternatively, this file may be used under the terms of the GNU
-+** General Public License version 3.0 as published by the Free Software
-+** Foundation and appearing in the file LICENSE.GPL included in the
-+** packaging of this file.  Please review the following information to
-+** ensure the GNU General Public License version 3.0 requirements will be
-+** met: http://www.gnu.org/copyleft/gpl.html.
-+**
-+**
-+** $QT_END_LICENSE$
-+**
-+****************************************************************************/
-+
-+#ifndef QWAYLANDXDGSHELL_H
-+#define QWAYLANDXDGSHELL_H
-+
-+#include <QtCore/QSize>
-+
-+#include <wayland-client.h>
-+
-+#include <QtWaylandClient/private/qwayland-xdg-shell.h>
-+#include <QtWaylandClient/private/qwaylandclientexport_p.h>
-+#include "qwaylandshellsurface_p.h"
-+
-+QT_BEGIN_NAMESPACE
-+
-+class QWaylandWindow;
-+class QWaylandInputDevice;
-+class QWindow;
-+
-+class Q_WAYLAND_CLIENT_EXPORT QWaylandXdgShell : public QtWayland::xdg_shell
-+{
-+public:
-+    QWaylandXdgShell(struct ::xdg_shell *shell);
-+    QWaylandXdgShell(struct ::wl_registry *registry, uint32_t id);
-+
-+    virtual ~QWaylandXdgShell();
-+
-+private:
-+    void xdg_shell_ping(uint32_t serial) Q_DECL_OVERRIDE;
-+};
-+
-+QT_END_NAMESPACE
-+
-+#endif // QWAYLANDXDGSHELL_H
-diff --git a/src/client/qwaylandxdgsurface.cpp b/src/client/qwaylandxdgsurface.cpp
-index 1b8affa..5fb74d2 100644
---- a/src/client/qwaylandxdgsurface.cpp
-+++ b/src/client/qwaylandxdgsurface.cpp
-@@ -87,23 +87,25 @@ void QWaylandXdgSurface::move(QWaylandInputDevice *inputDevice)
- 
- void QWaylandXdgSurface::setMaximized()
- {
--    m_maximized = true;
--    m_size = m_window->window()->geometry().size();
--    set_maximized();
-+    if (!m_maximized)
-+        request_change_state(XDG_SURFACE_STATE_MAXIMIZED, true, 0);
- }
- 
- void QWaylandXdgSurface::setFullscreen()
- {
--    m_fullscreen = true;
--    m_size = m_window->window()->geometry().size();
--    set_fullscreen();
-+    if (!m_fullscreen)
-+        request_change_state(XDG_SURFACE_STATE_FULLSCREEN, true, 0);
- }
- 
- void QWaylandXdgSurface::setNormal()
- {
-     if (m_fullscreen || m_maximized  || m_minimized) {
--        if (m_maximized) { unset_maximized(); }
--        if (m_fullscreen) { unset_fullscreen(); }
-+        if (m_maximized) {
-+            request_change_state(XDG_SURFACE_STATE_MAXIMIZED, false, 0);
-+        }
-+        if (m_fullscreen) {
-+            request_change_state(XDG_SURFACE_STATE_FULLSCREEN, false, 0);
-+        }
- 
-         m_fullscreen = m_maximized = m_minimized = false;
-         setTopLevel();
-@@ -158,16 +160,48 @@ void QWaylandXdgSurface::setAppId(const QString & appId)
-     return QtWayland::xdg_surface::set_app_id(appId);
- }
- 
--void QWaylandXdgSurface::xdg_surface_ping(uint32_t serial)
-+void QWaylandXdgSurface::xdg_surface_configure(int32_t width, int32_t height)
- {
--    pong(serial);
-+    m_window->configure(0 , width, height);
- }
- 
--void QWaylandXdgSurface::xdg_surface_configure(uint32_t edges, int32_t width,
--                                               int32_t height)
-+void QWaylandXdgSurface::xdg_surface_change_state(uint32_t state,
-+                                                  uint32_t value,
-+                                                  uint32_t serial)
- {
--    m_window->configure(edges, width, height);
-+
-+    if (state == XDG_SURFACE_STATE_MAXIMIZED
-+            || state == XDG_SURFACE_STATE_FULLSCREEN) {
-+        if (value) {
-+            m_size = m_window->window()->geometry().size();
-+        } else {
-+            QMargins m = m_window->frameMargins();
-+            m_window->configure(0, m_size.width() + m.left() + m.right(), m_size.height() + m.top() + m.bottom());
-+        }
-+    }
-+
-+    switch (state) {
-+    case XDG_SURFACE_STATE_MAXIMIZED:
-+        m_maximized = value;
-+        break;
-+    case XDG_SURFACE_STATE_FULLSCREEN:
-+        m_fullscreen = value;
-+        break;
-+    }
-+
-+    xdg_surface_ack_change_state(object(), state, value, serial);
- }
- 
-+void QWaylandXdgSurface::xdg_surface_activated()
-+{
-+}
-+
-+void QWaylandXdgSurface::xdg_surface_deactivated()
-+{
-+}
-+
-+void QWaylandXdgSurface::xdg_surface_close()
-+{
-+}
- 
- QT_END_NAMESPACE
-diff --git a/src/client/qwaylandxdgsurface_p.h b/src/client/qwaylandxdgsurface_p.h
-index 744d3f3..d2a154e 100644
---- a/src/client/qwaylandxdgsurface_p.h
-+++ b/src/client/qwaylandxdgsurface_p.h
-@@ -93,10 +93,15 @@ private:
-     bool m_fullscreen;
-     QSize m_size;
- 
--    void xdg_surface_ping(uint32_t serial) Q_DECL_OVERRIDE;
--    void xdg_surface_configure(uint32_t edges,
--                               int32_t width,
-+    void xdg_surface_configure(int32_t width,
-                                int32_t height) Q_DECL_OVERRIDE;
-+    void xdg_surface_change_state(uint32_t state,
-+                                  uint32_t value,
-+                                  uint32_t serial) Q_DECL_OVERRIDE;
-+    void xdg_surface_activated() Q_DECL_OVERRIDE;
-+    void xdg_surface_deactivated() Q_DECL_OVERRIDE;
-+    void xdg_surface_close() Q_DECL_OVERRIDE;
-+
-     friend class QWaylandWindow;
- };
- 
--- 
-1.9.1
-