Introduce meta-agl-profile-core and meta-agl-profile-graphics

Rework towards agl profiles.

This change is part of a series of changes to create the
AGL profiles.

This set will mainly introduce the 'core' profile.

It is setup to be a drop-in change, thus some files were kept
in (dummy) locations for now.
However, they'll be taken care of in the next changes in this series.

The main target of the meta-agl-profile-core layer is to host:
- a minimal, bootable image with network and package management enabled
  -- agl-image-boot
- a minimal image with network and packagemanagement and the AGL APIs
  -- agl-image-minimal

The layer meta-agl-profile-graphical is used as superset of these
and includes support for egl+wayland+weston. All recipes concerning
graphics were moved there. This is not a full profile as we still have
to migrate some parts of meta-agl-demo in a follow-up changeset.

The roadmap as discussed during the F2F session in Karlsruhe is:
- week 16 : core profile and profiles w/o graphics
- week 17 : graphical profiles
- week 18 : final conversion of the demo image

v2: moved agl-login-manager from -graphics to -core (see Jose's comment)
v3: moved back after discussion - follow-up in separate changeset

Change-Id: Idacb0d1274baac1f63f8d1b850d4b1104ac33918
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>

1 files changed, 0 insertions, 68 deletions

diff --git a/meta-ivi-common/recipes-test/interbench/files/interbench.c.patch b/meta-ivi-common/recipes-test/interbench/files/interbench.c.patch
deleted file mode 100755
index c882739ba..000000000
--- a/meta-ivi-common/recipes-test/interbench/files/interbench.c.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- interbench.c.orig	2009-10-30 23:14:59.000000000 -0500
-+++ interbench.c	2012-07-10 19:06:00.000000000 -0500
-@@ -71,6 +71,7 @@ struct user_data {
- 	char datestamp[13];
- 	FILE *logfile;
- } ud = {
-+	.ram = 0,
- 	.duration = 30,
- 	.cpu_load = 4,
- 	.log = 1,
-@@ -652,6 +653,8 @@ void emulate_write(struct thread *th)
- 			terminal_error("fopen");
- 		if (stat(name, &statbuf) == -1)
- 			terminal_fileopen_error(fp, "stat");
-+		if (statbuf.st_blksize < MIN_BLK_SIZE)
-+			statbuf.st_blksize = MIN_BLK_SIZE;
- 		for (i = 0 ; i < mem; i++) {
- 			if (fwrite(buf, statbuf.st_blksize, 1, fp) != 1)
- 				terminal_fileopen_error(fp, "fwrite");
-@@ -1136,14 +1139,17 @@ void get_ram(void)
- 	if(!(meminfo = fopen("/proc/meminfo", "r")))
- 		terminal_error("fopen");
- 
--	ud.ram = ud.swap = 0;
--	while( !feof(meminfo) && !fscanf(meminfo, "MemTotal: %lu kB", &ud.ram) )
--            fgets(aux,sizeof(aux),meminfo);
-+	if (!ud.ram)
-+	{
-+	    while( !feof(meminfo) && !fscanf(meminfo, "MemTotal: %lu kB", &ud.ram) )
-+        	fgets(aux,sizeof(aux),meminfo);
-+	}
-+	ud.swap = 0;
- 	while( !feof(meminfo) && !fscanf(meminfo, "SwapTotal: %lu kB", &ud.swap) )
-             fgets(aux,sizeof(aux),meminfo);
- 	if (fclose(meminfo) == -1)
- 		terminal_error("fclose");
--
-+ 
- 	if( !ud.ram || !ud.swap ) {
- 		unsigned long i;
- 		fprintf(stderr, "\nCould not get memory or swap size. ");
-@@ -1399,6 +1405,7 @@ void usage(void)
- 	fprintf(stderr, "\t[-h]\n\n");
- 	fprintf(stderr, " -l\tUse <int> loops per sec (default: use saved benchmark)\n");
- 	fprintf(stderr, " -L\tUse cpu load of <int> with burn load (default: 4)\n");
-+	fprintf(stderr, " -M\tForce RAM size to <int>. Useful when disk is smaller than RAM.\n");
- 	fprintf(stderr, " -t\tSeconds to run each benchmark (default: 30)\n");
- 	fprintf(stderr, " -B\tNice the benchmarked thread to <int> (default: 0)\n");
- 	fprintf(stderr, " -N\tNice the load thread to <int> (default: 0)\n");
-@@ -1482,7 +1489,7 @@ int main(int argc, char **argv)
- 		terminal_error("signal");
- #endif
- 
--	while ((q = getopt(argc, argv, "hl:L:B:N:ut:bcnrC:I:m:w:x:W:X:")) != -1) {
-+	while ((q = getopt(argc, argv, "hl:L:M:B:N:ut:bcnrC:I:m:w:x:W:X:")) != -1) {
- 		switch (q) {
- 			case 'h':
- 				usage();
-@@ -1496,6 +1503,9 @@ int main(int argc, char **argv)
- 			case 'L':
- 				ud.cpu_load = atoi(optarg);
- 				break;
-+			case 'M':
-+				ud.ram = atoi(optarg);
-+				break;
- 			case 'B':
- 				ud.bench_nice = atoi(optarg);
- 				break;