Remove old components around joule board

Remove scripts that supported the EOL Joule board.

Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I2a50ed2631ff1bc961717e7cff27b861f6c43d5b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25159
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>

1 files changed, 0 insertions, 507 deletions

diff --git a/scripts/mkabl-agl.sh b/scripts/mkabl-agl.sh
deleted file mode 100755
index 611c08fbc..000000000
--- a/scripts/mkabl-agl.sh
+++ /dev/null
@@ -1,507 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# This program is free software;  you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY;  without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program;  if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Modification from mkefidisk.sh provided by the Yocto project by Dominig
-# to install Automotive Grade Linux (AGL) on 
-# Intel platforms equipped with the Automotive Linux Boot (ABL)
-#
-# Dependencies:
-# Relies on the Intel iasImage tool to pakage the Kernel and the initrd in ABL format
-#
-# changes
-#         - simpler use model
-#         - keep initrd if present
-#         - does not allocate swap
-#         - accept .hddimg, wic and wic.xz as sources
-#
-
-LANG=C
-
-# Set to 1 to enable additional output
-DEBUG=0
-exec 3>/dev/null
-
-#
-# Defaults
-#
-# 100 Mb for the boot partition
-BOOT_SIZE=100
-# min available space on TMP_DIR for uncompressing xz image in kB e.g. 5G (5000000)
-TMP_SIZE_MIN=5000000
-# TMP_DIR directory use for holding image file for uncompression (e.g. /tmp or $HOME)
-TMP_DIR=/tmp
-#
-MRB_DEBUG_TTY="ttyS2,115200n8"
-MRB_HDMI="HDMI-A-1:e"
-#
-IAS_PATH=""
-IAS_EXE="ias_image_app"
-IAS_CMD_LINE=/tmp/iasCommandLine.cmd
-
-# Cleanup after die()
-cleanup() {
-	debug "Syncing and unmounting devices"
-	# Unmount anything we mounted
-	unmount $ROOTFS_MNT || error "Failed to unmount $ROOTFS_MNT"
-	unmount $BOOTFS_MNT || error "Failed to unmount $BOOTFS_MNT"
-	unmount $HDDIMG_ROOTFS_MNT || error "Failed to unmount $HDDIMG_ROOTFS_MNT"
-	unmount $HDDIMG_MNT || error "Failed to unmount $HDDIMG_MNT"
-	if [ "$IMG_TYPE" = "DISK" ]; then
-        debug "de-attaching loop devices"
-        for LOOP_DEVICE in `losetup --list |grep $HDDIMG | cut -d" " -f1` ; do
-           losetup -d $LOOP_DEVICE  1>&3 2>&1 || error "Detaching $LOOP_DEVICE from $HDDIMG failled"
-        done   
-     fi
-	# Remove the TMPDIR
-	debug "Removing temporary files"
-	if [ -d "$TMPDIR" ]; then
-		rm -rf $TMPDIR || error "Failed to remove $TMPDIR"
-	fi
-    [ -f "$TMP_DIR/TMP-AGL-wic-image.wic" ] || rm -f $TMP_DIR/TMP-AGL-wic-image.wic
-}
-
-trap 'die "Signal Received, Aborting..."' HUP INT TERM
-
-# Logging routines
-WARNINGS=0
-ERRORS=0
-CLEAR="$(tput sgr0)"
-INFO="$(tput bold)"
-RED="$(tput setaf 1)$(tput bold)"
-GREEN="$(tput setaf 2)$(tput bold)"
-YELLOW="$(tput setaf 3)$(tput bold)"
-info() {
-	echo "${INFO}$1${CLEAR}"
-}
-error() {
-	ERRORS=$((ERRORS+1))
-	echo "${RED}$1${CLEAR}"
-}
-warn() {
-	WARNINGS=$((WARNINGS+1))
-	echo "${YELLOW}$1${CLEAR}"
-}
-success() {
-	echo "${GREEN}$1${CLEAR}"
-}
-die() {
-	error "$1"
-	cleanup
-	exit 1
-}
-debug() {
-	if [ $DEBUG -eq 1 ]; then
-		echo "$1"
-	fi
-}
-
-usage() {
-	echo "Install AGL on a removable device to boot ABL based computer"
-        echo "ABL on the target must accept non signed development Linux kernel"
-	echo "In particular is can create USB or SD bootable support for Intel MRB"
-	echo ""
-	echo "Usage: $(basename $0) [-v] [-p path_to_iasImage_tool] HDDIMG REMOVABLE_DEVICE"
-	echo "       -v: Verbose debug"
-        echo "       path_to_iasImage_tool: path the iasImage tool provided by Intel."
-	echo "       HDDIMG: The hddimg file to generate the efi disk from"
-    echo "               Supported formats are .hddimg, .wic .wic.xz"
-	echo "       REMOVABLE_DEVICE: The block device to write the image to, e.g. /dev/sdh"
-	echo "ex:"
-	echo "   mkabl-agl.sh   agl-demo-platform-intel-corei7-64.wic.xz /dev/sdd"
-    echo "   mkabl-agl.sh   agl-demo-platform-intel-corei7-64.hddimg /dev/sdd"
-
-        echo "                  assuming that iasImage is accessible via your default path"
-	exit 1
-}
-
-image_details() {
-	IMG=$1
-	info "Image details"
-	echo "    image: $(stat --printf '%N\n' $IMG)"
-	echo "     size: $(stat -L --printf '%s bytes\n' $IMG)"
-	echo " modified: $(stat -L --printf '%y\n' $IMG)"
-	echo "     type: $(file -L -b $IMG)"
-	echo ""
-}
-
-device_details() {
-	DEV=$1
-	BLOCK_SIZE=512
-
-	info "Device details"
-	echo "  device: $DEVICE"
-	if [ -f "/sys/class/block/$DEV/device/vendor" ]; then
-		echo "  vendor: $(cat /sys/class/block/$DEV/device/vendor)"
-	else
-		echo "  vendor: UNKOWN"
-	fi
-	if [ -f "/sys/class/block/$DEV/device/model" ]; then
-		echo "   model: $(cat /sys/class/block/$DEV/device/model)"
-	else
-		echo "   model: UNKNOWN"
-	fi
-	if [ -f "/sys/class/block/$DEV/size" ]; then
-		echo "    size: $(($(cat /sys/class/block/$DEV/size) * $BLOCK_SIZE)) bytes"
-	else
-		echo "    size: UNKNOWN"
-	fi
-	echo ""
-}
-
-unmount_device() {
-	grep -q $DEVICE /proc/mounts
-	if [ $? -eq 0 ]; then
-		warn "$DEVICE listed in /proc/mounts, attempting to unmount"
-		umount $DEVICE* 2>/dev/null
-		! grep -q $DEVICE /proc/mounts && info "Unmounted successfully"
-		return $?
-	fi
-	return 0
-}
-
-unmount() {
-	if [ "$1" = "" ] ; then
-		return 0
-	fi
-	grep -q $1 /proc/mounts
-	if [ $? -eq 0 ]; then
-		debug "Unmounting $1"
-		umount $1
-		! grep -q $1 /proc/mounts # check if unmounted successfully
-		return $?
-	fi
-	return 0
-}
-
-#
-# Parse and validate arguments
-#
-
-if [ "$1" = "-v" ] ; then
-	DEBUG=1
-	exec 3>&1
-	shift
-fi
-
-if [ "$1" = "-p" ] ; then
-        IAS_PATH="$2""/"
-        shift 2
-fi
-
-if  [ $# -ne 2 ]; then
-        usage
-fi
-
-IAS_IMAGE_TOOL="$IAS_PATH$IAS_EXE"
-debug "iasImage tool is: $IAS_IMAGE_TOOL"
-which $IAS_IMAGE_TOOL > IAS_IMAGE_TOOL_PATH
-if  [ ! -x "$(command -v $IAS_IMAGE_TOOL)" ]; then
-   die "$IAS_IMAGE_TOOL not found pointed by the path via 'sudo; use -p option'"
-fi
-
-HDDIMG=$1
-DEVICE=$2
-
-LINK=$(readlink $DEVICE)
-if [ $? -eq 0 ]; then
-	DEVICE="$LINK"
-fi
-
-if [ ! -w "$DEVICE" ]; then
-	if [ ! -e "${DEVICE}" ] ; then
-		die "Device $DEVICE cannot be found"
-	else
-		die "Device $DEVICE is not writable (need to run under sudo?)"
-	fi
-fi
-
-if [ ! -e "$HDDIMG" ]; then
-	die "HDDIMG $HDDIMG does not exist"
-fi
-HDDIMG_EXT=${HDDIMG##*.}
-case $HDDIMG_EXT in
-  hddimg)
-     IMG_TYPE="MOUNT"
-     IMG_COMPRESS="NO"
-     debug "Detected: uncompressed image type .hddimg"
-     ;;
-  wic)
-     IMG_TYPE="DISK"
-     IMG_COMPRESS="NO"
-     debug "Detected: uncompressed image type .wic"
-     ;;
-  xz)
-     IMG_TYPE="DISK"
-     IMG_COMPRESS="YES"
-     debug "Detected: xz compressed image type .wic"
-     command -v xz >/dev/null 2>&1 || { die "xz command is not available, pleaes install xz package"; }
-     TMP_SIZE=`df -k $TMP_DIR | awk '/[0-9]%/{print $(NF-2)}'`
-     if [ "$TMP_SIZE" -lt "$TMP_SIZE_MIN" ]; then
-       die "Available space on $TMP_DIR must be at least $TMP_SIZE_MIN kB" 
-     fi
-     printf "Starting decompression of the image. It may take some time ..."
-     xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic  $HDDIMG|| \
-         die "xz command failled: xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic"
-     HDDIMG="$TMP_DIR/TMP-AGL-wic-image.wic"
-     echo "Image uncompressed, starting doing real work ..."
-     ;;
-  *)
-     die "Unsupported image format: $HDDIMG_EXT Supported format are .hddimg .wic wic.xz"
-     ;;
-esac
-#
-# Ensure the hddimg is not mounted
-#
-debug "will now try to umount /detach previous images"
-case $IMG_TYPE in
-  MOUNT)
-      unmount "$HDDIMG" || die "Failed to unmount $HDDIMG"
-      ;;
-  DISK)
-      [ `losetup --list |grep $HDDIMG | wc -l ` -gt 1 ] && die "Image mounted more than once, manual cleaning required see: losetup --list"
-      debug "ready to attach the wic image to aloop device"
-      LOOP_DEVICE=`losetup --find --show $HDDIMG`  && ( losetup -d $LOOP_DEVICE  1>&3 2>&1 || die "Detaching $LOOP_DEVICE from $HDDIMG failled")
-      ;;
-  *)
-      die "unknown image format $IMG_TYPE"
-      ;;
-esac
-#
-# Check if any $DEVICE partitions are mounted
-#
-unmount_device || die "Failed to unmount $DEVICE"
-
-#
-# Confirm device with user
-#
-image_details $HDDIMG
-device_details $(basename $DEVICE)
-echo -n "${INFO}Prepare ABL image on $DEVICE [y/N]?${CLEAR} "
-read RESPONSE
-if [ "$RESPONSE" != "y" ]; then
-	echo "Image creation aborted"
-	exit 0
-fi
-
-
-#
-# Prepare the temporary working space
-#
-TMPDIR=$(mktemp -d mkabldisk-XXX) || die "Failed to create temporary mounting directory."
-HDDIMG_MNT=$TMPDIR/hddimg
-debug "TEMPDIR is: $TMPDIR"
-HDDIMG_ROOTFS_MNT=$TMPDIR/hddimg_rootfs
-ROOTFS_MNT=$TMPDIR/rootfs
-BOOTFS_MNT=$TMPDIR/bootfs
-mkdir $HDDIMG_MNT || die "Failed to create $HDDIMG_MNT"
-mkdir $HDDIMG_ROOTFS_MNT || die "Failed to create $HDDIMG_ROOTFS_MNT"
-mkdir $ROOTFS_MNT || die "Failed to create $ROOTFS_MNT"
-mkdir $BOOTFS_MNT || die "Failed to create $BOOTFS_MNT"
-
-
-#
-# Partition $DEVICE
-#
-DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-# If the device size is not reported there may not be a valid label
-if [ "$DEVICE_SIZE" = "" ] ; then
-	parted -s $DEVICE mklabel msdos || die "Failed to create MSDOS partition table"
-	DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-fi
-ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE))
-ROOTFS_START=$((BOOT_SIZE))
-ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
-
-# MMC devices use a partition prefix character 'p'
-PART_PREFIX=""
-if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
-	PART_PREFIX="p"
-fi
-BOOTFS=$DEVICE${PART_PREFIX}1
-ROOTFS=$DEVICE${PART_PREFIX}2
-
-TARGET_PART_PREFIX=""
-if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ]; then
-	TARGET_PART_PREFIX="p"
-fi
-TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
-
-echo ""
-info "Boot partition size:   $BOOT_SIZE MB ($BOOTFS)"
-info "ROOTFS partition size: $ROOTFS_SIZE MB ($ROOTFS)"
-echo ""
-
-# Use MSDOS by default as GPT cannot be reliably distributed in disk image form
-# as it requires the backup table to be on the last block of the device, which
-# of course varies from device to device.
-
-info "Partitioning installation media ($DEVICE)"
-
-debug "Deleting partition table on $DEVICE"
-dd if=/dev/zero of=$DEVICE bs=512 count=2 1>&3 2>&1 || die "Failed to zero beginning of $DEVICE"
-
-debug "Creating new partition table (MSDOS) on $DEVICE"
-parted -s $DEVICE mklabel msdos 1>&3 2>&1 || die "Failed to create MSDOS partition table"
-
-debug "Creating boot partition on $BOOTFS"
-parted -s $DEVICE mkpart primary 0% $BOOT_SIZE 1>&3 2>&1 || die "Failed to create BOOT partition"
-
-debug "Enabling boot flag on $BOOTFS"
-parted -s $DEVICE set 1 boot on 1>&3 2>&1 || die "Failed to enable boot flag"
-
-debug "Creating ROOTFS partition on $ROOTFS"
-parted -s $DEVICE mkpart primary $ROOTFS_START $ROOTFS_END 1>&3 2>&1 || die "Failed to create ROOTFS partition"
-
-# as blkid does not provide PARTUUID on Ubuntu LTS 14.04 we myst hack via fdisk
-#ROOTFS_PARTUUID=$(blkid |grep -e "$ROOTFS" |sed -n 's/^.*PARTUUID=/PARTUUID=/p')
-export LC_ALL=C
-ROOTFS_DISKID=$(fdisk -l "$DEVICE" | grep -e "Disk identifier" | sed -n 's/^.*Disk identifier: 0x/PARTUUID=/p')
-if [ $ROOTFS_DISKID = "" ]; then
-    die "Failed to read DISKID"
-fi
-BOOTFS_PARTUUID="$ROOTFS_DISKID-01"
-ROOTFS_PARTUUID="$ROOTFS_DISKID-02"
-debug "PARTUUID for ROOTFS is $ROOTFS_PARTUUID"
-
-if [ $DEBUG -eq 1 ]; then
-	parted -s $DEVICE print
-fi
-
-
-#
-# Check if any $DEVICE partitions are mounted after partitioning
-#
-unmount_device || die "Failed to unmount $DEVICE partitions"
-
-
-#
-# Format $DEVICE partitions
-#
-info "Formatting partitions"
-debug "Formatting $BOOTFS as ext2"
-mkfs.ext2 -F -F -L BOOT $BOOTFS  1>&3 2>&1 || die "Failed to format $BOOTFS"
-
-debug "Formatting $ROOTFS as ext4"
-mkfs.ext4 -F $ROOTFS -L "ROOT" 1>&3 2>&1 || die "Failed to format $ROOTFS"
-
-
-# Mounting image file system on loop devices
-#
-case $IMG_TYPE in
-
-  MOUNT) 
-     debug "Mounting images and device in preparation for installation"
-     mount -o loop $HDDIMG $HDDIMG_MNT 1>&3 2>&1 || die "Failed to mount $HDDIMG"
-     mount -o loop $HDDIMG_MNT/rootfs.img $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount rootfs.img"
-     ;;
-  DISK)
-     debug "Attaching image and mounting partitions then device in preparation for installation"
-     LOOP_DEVICE=`losetup --find` || die "Failled to find an available loop device see: losetup --find"
-     losetup -P $LOOP_DEVICE $HDDIMG  1>&3 2>&1 || die "Attaching $LOOP_DEVICE from $HDDIMG failled"
-     mount "$LOOP_DEVICE"p2  $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp1 on $HDDIMG_ROOTFS_MNT"
-     mount "$LOOP_DEVICE"p1  $HDDIMG_MNT       1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp2 on $HDDIMG_MNT"
-     ;;
-  *)
-      die "unknown image format $IMG_TYPE"
-      ;;
-esac
-
-mount $ROOTFS $ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $ROOTFS on $ROOTFS_MNT"
-mount $BOOTFS $BOOTFS_MNT 1>&3 2>&1 || die "Failed to mount $BOOTFS on $BOOTFS_MNT"
-
-info "Preparing boot partition"
-# create the config file for iasImage
-# Remove any existing root= kernel parameters and:
-# o Add a root= parameter with the target rootfs
-# o Specify ro so fsck can be run during boot
-# o Specify rootwait in case the target media is an asyncronous block device
-#   such as MMC or USB disks
-# o Specify "quiet" to minimize boot time when using slow serial consoles
-
-# iasImage command line file creation
-echo "root=$ROOTFS_PARTUUID"   > $IAS_CMD_LINE
-echo "console=$MRB_DEBUG_TTY" >> $IAS_CMD_LINE
-echo "earlycon=uart8250,mmio32,0xfc000000,115200n8" >> $IAS_CMD_LINE
-echo "rootwait" >> $IAS_CMD_LINE
-echo "video=$MRB_HDMI" >> $IAS_CMD_LINE
-echo "i915.enable_initial_modeset=1" >> $IAS_CMD_LINE
-debug "temp config for iasImage is $IAS_CMD_LINE"
-
-if [ -f $HDDIMG_MNT/vmlinuz ]; then
-   KERNEL_TYPE="vmlinuz"
-   debug "kernel is vmlinuz"
-fi
-if [ -f $HDDIMG_MNT/bzimage ]; then
-   KERNEL_TYPE="bzimage"
-   debug "kernel is bzimage -> vmlinuz"
-fi
-if [ -f $HDDIMG_MNT/microcode.cpio ]; then
-     warn "initrd=microcode.cpio is not a supported configuration, microcode.cpio has been ignored"
-fi
-[ -z $KERNEL_TYPE ] && die "Linux kernel type in $HDDIMG is unsupported"
-
-if [ -f $HDDIMG_MNT/initrd ]; 
-  then
-     info "creating ABL image with initramsfs"
-     debug "$IAS_IMAGE_TOOL -o  $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE $HDDIMG_MNT/initrd"
-     $IAS_IMAGE_TOOL -o  $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE $HDDIMG_MNT/initrd
-  else
-     info "creating ABL image without initramfs"
-     debug "$IAS_IMAGE_TOOL -o  $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE"
-     $IAS_IMAGE_TOOL -o  $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE
-fi     
-
-printf "Copying ROOTFS files ... "
-command -v rsync >/dev/null 2>&1 # check if rsync exists
-if [ $DEBUG -eq 1 ] && [ $? -eq 0 ]; then
-	rsync --info=progress2 -h -aHAXW --no-compress  $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-else
-	cp -a $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-fi
-
-debug "removing any swap entry in /etc/fstab"
-sed --in-place '/swap/d' $ROOTFS_MNT/etc/fstab 
-debug "fixing PARTUUID for /boot"
-sed --in-place -e "s#PARTUUID=[0-9a-z-]\+\t/boot#${BOOTFS_PARTUUID}\t/boot#" $ROOTFS_MNT/etc/fstab
-
-printf "flushing data on removable device. May take a while ... "
-sync --file-system $ROOTFS_MNT
-echo done
-
-# We dont want udev to mount our root device while we're booting...
-if [ -d $ROOTFS_MNT/etc/udev/ ] ; then
-	echo "$TARGET_DEVICE" >> $ROOTFS_MNT/etc/udev/mount.blacklist
-fi
-
-
-# Call cleanup to unmount devices and images and remove the TMPDIR
-cleanup
-
-echo ""
-if [ $WARNINGS -ne 0 ] && [ $ERRORS -eq 0 ]; then
-	echo "${YELLOW}Installation completed with warnings${CLEAR}"
-	echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-elif [ $ERRORS -ne 0 ]; then
-	echo "${RED}Installation encountered errors${CLEAR}"
-	echo "${RED}Errors: $ERRORS${CLEAR}"
-	echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-else
-	success "Installation completed successfully"
-fi
-echo ""