aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
diff options
context:
space:
mode:
authorJan-Simon Möller <jsmoeller@linuxfoundation.org>2020-08-28 16:55:59 +0200
committerJan-Simon Moeller <jsmoeller@linuxfoundation.org>2020-08-31 00:45:20 +0000
commit2dec1c0c7839353e2c9643511fe836c26d630094 (patch)
treefcf4e5c08dfd5fb95913f68342a48bb4570b8efa /scripts
parenteadebf9545c33880af1a99b7a8b8fe3ec1146310 (diff)
Remove old components around joule board
Remove scripts that supported the EOL Joule board. Bug-AGL: SPEC-3555 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I2a50ed2631ff1bc961717e7cff27b861f6c43d5b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25159 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Diffstat (limited to 'scripts')
-rwxr-xr-xscripts/ias_image_app191
-rwxr-xr-xscripts/mkabl-agl.sh507
-rwxr-xr-xscripts/mkefi-agl.sh531
3 files changed, 0 insertions, 1229 deletions
diff --git a/scripts/ias_image_app b/scripts/ias_image_app
deleted file mode 100755
index 6a9b55f30..000000000
--- a/scripts/ias_image_app
+++ /dev/null
@@ -1,191 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-# The CRC is a python translation of c code generated by (available under MIT license)
-# pycrc 0.7.1 (http://www.tty1.net/pycrc/). Command line used:
-# './pycrc.py --model=crc-32c --generate c --algorithm=table-driven'
-#
-
-import argparse
-import os
-import struct
-import errno
-
-__version__ = "0.0.1a"
-
-#========================================================================
-# IAS image creation
-#========================================================================
-
-MAGIC = 0x2E6B7069
-HEADER = struct.Struct('IIIIIII')
-
-def image (payload, ext_hdr=''):
-
- payload_len = round_up(len(payload))
- image_len = HEADER.size + len(ext_hdr) + payload_len + 4
- bytes = bytearray (image_len)
-
- type = 0x30000
- version = 0
- length = payload_len
- offset = HEADER.size + len(ext_hdr)
- uncomp = length ## compression not supported (yet)
- hcrc = 0
- HEADER.pack_into (bytes, 0,
- MAGIC, type, version, length, offset, uncomp, hcrc)
- crc = crc32c_buf (bytes[0:24])
- struct.pack_into ('I', bytes, 24, crc)
-
- bytes[HEADER.size:offset] = ext_hdr
- bytes[offset:offset+len(payload)] = payload
- crc = crc32c_buf(bytes[HEADER.size:offset+length])
- struct.pack_into ('I', bytes, offset+length, crc)
-
- return bytes
-
-def multi_image (files):
-
- nfile = len(files)
-
- subimg = []
- o = 0
- for f in files:
- l = len(f)
- subimg.append((o, l))
- o += round_up(l)
-
- sizes = bytearray(4*nfile)
- payload = bytearray(o)
- for i in range(nfile):
- o, l = subimg[i]
- struct.pack_into ('I', sizes, 4*i, l)
- payload[o:o+l] = files[i]
-
- return image (payload, sizes)
-
-# ========================================================================
-# Support functions.
-# ========================================================================
-
-def round_up (value, div=4):
- """Round VALUE up to the next multiple of DIV (a power of two)."""
- return (value + div - 1) & ~(div - 1)
-
-# ========================================================================
-#
-# CRC32C
-#
-# Prehashed table of value to speed script execution
-#
-_CRC32C_TABLE = (
-
- 0x00000000, 0xF26B8303, 0xE13B70F7, 0x1350F3F4, 0xC79A971F, 0x35F1141C, 0x26A1E7E8, 0xD4CA64EB,
- 0x8AD958CF, 0x78B2DBCC, 0x6BE22838, 0x9989AB3B, 0x4D43CFD0, 0xBF284CD3, 0xAC78BF27, 0x5E133C24,
- 0x105EC76F, 0xE235446C, 0xF165B798, 0x030E349B, 0xD7C45070, 0x25AFD373, 0x36FF2087, 0xC494A384,
- 0x9A879FA0, 0x68EC1CA3, 0x7BBCEF57, 0x89D76C54, 0x5D1D08BF, 0xAF768BBC, 0xBC267848, 0x4E4DFB4B,
- 0x20BD8EDE, 0xD2D60DDD, 0xC186FE29, 0x33ED7D2A, 0xE72719C1, 0x154C9AC2, 0x061C6936, 0xF477EA35,
- 0xAA64D611, 0x580F5512, 0x4B5FA6E6, 0xB93425E5, 0x6DFE410E, 0x9F95C20D, 0x8CC531F9, 0x7EAEB2FA,
- 0x30E349B1, 0xC288CAB2, 0xD1D83946, 0x23B3BA45, 0xF779DEAE, 0x05125DAD, 0x1642AE59, 0xE4292D5A,
- 0xBA3A117E, 0x4851927D, 0x5B016189, 0xA96AE28A, 0x7DA08661, 0x8FCB0562, 0x9C9BF696, 0x6EF07595,
- 0x417B1DBC, 0xB3109EBF, 0xA0406D4B, 0x522BEE48, 0x86E18AA3, 0x748A09A0, 0x67DAFA54, 0x95B17957,
- 0xCBA24573, 0x39C9C670, 0x2A993584, 0xD8F2B687, 0x0C38D26C, 0xFE53516F, 0xED03A29B, 0x1F682198,
- 0x5125DAD3, 0xA34E59D0, 0xB01EAA24, 0x42752927, 0x96BF4DCC, 0x64D4CECF, 0x77843D3B, 0x85EFBE38,
- 0xDBFC821C, 0x2997011F, 0x3AC7F2EB, 0xC8AC71E8, 0x1C661503, 0xEE0D9600, 0xFD5D65F4, 0x0F36E6F7,
- 0x61C69362, 0x93AD1061, 0x80FDE395, 0x72966096, 0xA65C047D, 0x5437877E, 0x4767748A, 0xB50CF789,
- 0xEB1FCBAD, 0x197448AE, 0x0A24BB5A, 0xF84F3859, 0x2C855CB2, 0xDEEEDFB1, 0xCDBE2C45, 0x3FD5AF46,
- 0x7198540D, 0x83F3D70E, 0x90A324FA, 0x62C8A7F9, 0xB602C312, 0x44694011, 0x5739B3E5, 0xA55230E6,
- 0xFB410CC2, 0x092A8FC1, 0x1A7A7C35, 0xE811FF36, 0x3CDB9BDD, 0xCEB018DE, 0xDDE0EB2A, 0x2F8B6829,
- 0x82F63B78, 0x709DB87B, 0x63CD4B8F, 0x91A6C88C, 0x456CAC67, 0xB7072F64, 0xA457DC90, 0x563C5F93,
- 0x082F63B7, 0xFA44E0B4, 0xE9141340, 0x1B7F9043, 0xCFB5F4A8, 0x3DDE77AB, 0x2E8E845F, 0xDCE5075C,
- 0x92A8FC17, 0x60C37F14, 0x73938CE0, 0x81F80FE3, 0x55326B08, 0xA759E80B, 0xB4091BFF, 0x466298FC,
- 0x1871A4D8, 0xEA1A27DB, 0xF94AD42F, 0x0B21572C, 0xDFEB33C7, 0x2D80B0C4, 0x3ED04330, 0xCCBBC033,
- 0xA24BB5A6, 0x502036A5, 0x4370C551, 0xB11B4652, 0x65D122B9, 0x97BAA1BA, 0x84EA524E, 0x7681D14D,
- 0x2892ED69, 0xDAF96E6A, 0xC9A99D9E, 0x3BC21E9D, 0xEF087A76, 0x1D63F975, 0x0E330A81, 0xFC588982,
- 0xB21572C9, 0x407EF1CA, 0x532E023E, 0xA145813D, 0x758FE5D6, 0x87E466D5, 0x94B49521, 0x66DF1622,
- 0x38CC2A06, 0xCAA7A905, 0xD9F75AF1, 0x2B9CD9F2, 0xFF56BD19, 0x0D3D3E1A, 0x1E6DCDEE, 0xEC064EED,
- 0xC38D26C4, 0x31E6A5C7, 0x22B65633, 0xD0DDD530, 0x0417B1DB, 0xF67C32D8, 0xE52CC12C, 0x1747422F,
- 0x49547E0B, 0xBB3FFD08, 0xA86F0EFC, 0x5A048DFF, 0x8ECEE914, 0x7CA56A17, 0x6FF599E3, 0x9D9E1AE0,
- 0xD3D3E1AB, 0x21B862A8, 0x32E8915C, 0xC083125F, 0x144976B4, 0xE622F5B7, 0xF5720643, 0x07198540,
- 0x590AB964, 0xAB613A67, 0xB831C993, 0x4A5A4A90, 0x9E902E7B, 0x6CFBAD78, 0x7FAB5E8C, 0x8DC0DD8F,
- 0xE330A81A, 0x115B2B19, 0x020BD8ED, 0xF0605BEE, 0x24AA3F05, 0xD6C1BC06, 0xC5914FF2, 0x37FACCF1,
- 0x69E9F0D5, 0x9B8273D6, 0x88D28022, 0x7AB90321, 0xAE7367CA, 0x5C18E4C9, 0x4F48173D, 0xBD23943E,
- 0xF36E6F75, 0x0105EC76, 0x12551F82, 0xE03E9C81, 0x34F4F86A, 0xC69F7B69, 0xD5CF889D, 0x27A40B9E,
- 0x79B737BA, 0x8BDCB4B9, 0x988C474D, 0x6AE7C44E, 0xBE2DA0A5, 0x4C4623A6, 0x5F16D052, 0xAD7D5351
-)
-
-def crc32c (byte, crc=0xffffffff):
-
- crc = (crc >> 8) ^ _CRC32C_TABLE[(crc ^ byte) & 0xff]
- return crc
-
-def crc32c_buf (buf, crc=0xffffffff):
-
- for b in buf:
- crc = crc32c (b, crc)
- return crc
-
-# ========================================================================
-
-#========================================================================
-# Main program: Argument handling.
-#========================================================================
-
-def parse_args():
- """Parse the command line and return an argparse.Namespace object."""
-
- parser = argparse.ArgumentParser(description='Create a NON SIGNED IAS image to be used with DEVEL-ABL.')
-
- parser.add_argument ('-V', '--version',
- action='version', version='%(prog)s ' + __version__)
- parser.add_argument ('-o', '--output',
- default='image.bin',
- help='write final image to OUTPUT')
- parser.add_argument ('-i', '--ignore',
- default='',
- help='provided for script compatibility with full featured ias_image_app',)
-
- parser.add_argument ('file',
- help='add FILE to payload of IMAGE being created',
- nargs='+',
- metavar='file')
-
- return parser.parse_args()
-
-# ------------------------------------------------------------------------
-
-def main():
-
- a = parse_args()
- try:
- data = [open(f, 'rb').read() for f in a.file]
- except IOError:
- print ('error: Cannot open', a.file)
- exit (1)
- print ('Creating NON signed Linux Kernel for ABL')
- img = multi_image(data)
- try:
- open (a.output, 'wb').write (img)
- except IOError as err:
- print ('error: Cannot open for write', a.output)
- exit (2)
-
-if __name__ == '__main__':
- main()
-
-# ========================================================================
diff --git a/scripts/mkabl-agl.sh b/scripts/mkabl-agl.sh
deleted file mode 100755
index 611c08fbc..000000000
--- a/scripts/mkabl-agl.sh
+++ /dev/null
@@ -1,507 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Modification from mkefidisk.sh provided by the Yocto project by Dominig
-# to install Automotive Grade Linux (AGL) on
-# Intel platforms equipped with the Automotive Linux Boot (ABL)
-#
-# Dependencies:
-# Relies on the Intel iasImage tool to pakage the Kernel and the initrd in ABL format
-#
-# changes
-# - simpler use model
-# - keep initrd if present
-# - does not allocate swap
-# - accept .hddimg, wic and wic.xz as sources
-#
-
-LANG=C
-
-# Set to 1 to enable additional output
-DEBUG=0
-exec 3>/dev/null
-
-#
-# Defaults
-#
-# 100 Mb for the boot partition
-BOOT_SIZE=100
-# min available space on TMP_DIR for uncompressing xz image in kB e.g. 5G (5000000)
-TMP_SIZE_MIN=5000000
-# TMP_DIR directory use for holding image file for uncompression (e.g. /tmp or $HOME)
-TMP_DIR=/tmp
-#
-MRB_DEBUG_TTY="ttyS2,115200n8"
-MRB_HDMI="HDMI-A-1:e"
-#
-IAS_PATH=""
-IAS_EXE="ias_image_app"
-IAS_CMD_LINE=/tmp/iasCommandLine.cmd
-
-# Cleanup after die()
-cleanup() {
- debug "Syncing and unmounting devices"
- # Unmount anything we mounted
- unmount $ROOTFS_MNT || error "Failed to unmount $ROOTFS_MNT"
- unmount $BOOTFS_MNT || error "Failed to unmount $BOOTFS_MNT"
- unmount $HDDIMG_ROOTFS_MNT || error "Failed to unmount $HDDIMG_ROOTFS_MNT"
- unmount $HDDIMG_MNT || error "Failed to unmount $HDDIMG_MNT"
- if [ "$IMG_TYPE" = "DISK" ]; then
- debug "de-attaching loop devices"
- for LOOP_DEVICE in `losetup --list |grep $HDDIMG | cut -d" " -f1` ; do
- losetup -d $LOOP_DEVICE 1>&3 2>&1 || error "Detaching $LOOP_DEVICE from $HDDIMG failled"
- done
- fi
- # Remove the TMPDIR
- debug "Removing temporary files"
- if [ -d "$TMPDIR" ]; then
- rm -rf $TMPDIR || error "Failed to remove $TMPDIR"
- fi
- [ -f "$TMP_DIR/TMP-AGL-wic-image.wic" ] || rm -f $TMP_DIR/TMP-AGL-wic-image.wic
-}
-
-trap 'die "Signal Received, Aborting..."' HUP INT TERM
-
-# Logging routines
-WARNINGS=0
-ERRORS=0
-CLEAR="$(tput sgr0)"
-INFO="$(tput bold)"
-RED="$(tput setaf 1)$(tput bold)"
-GREEN="$(tput setaf 2)$(tput bold)"
-YELLOW="$(tput setaf 3)$(tput bold)"
-info() {
- echo "${INFO}$1${CLEAR}"
-}
-error() {
- ERRORS=$((ERRORS+1))
- echo "${RED}$1${CLEAR}"
-}
-warn() {
- WARNINGS=$((WARNINGS+1))
- echo "${YELLOW}$1${CLEAR}"
-}
-success() {
- echo "${GREEN}$1${CLEAR}"
-}
-die() {
- error "$1"
- cleanup
- exit 1
-}
-debug() {
- if [ $DEBUG -eq 1 ]; then
- echo "$1"
- fi
-}
-
-usage() {
- echo "Install AGL on a removable device to boot ABL based computer"
- echo "ABL on the target must accept non signed development Linux kernel"
- echo "In particular is can create USB or SD bootable support for Intel MRB"
- echo ""
- echo "Usage: $(basename $0) [-v] [-p path_to_iasImage_tool] HDDIMG REMOVABLE_DEVICE"
- echo " -v: Verbose debug"
- echo " path_to_iasImage_tool: path the iasImage tool provided by Intel."
- echo " HDDIMG: The hddimg file to generate the efi disk from"
- echo " Supported formats are .hddimg, .wic .wic.xz"
- echo " REMOVABLE_DEVICE: The block device to write the image to, e.g. /dev/sdh"
- echo "ex:"
- echo " mkabl-agl.sh agl-demo-platform-intel-corei7-64.wic.xz /dev/sdd"
- echo " mkabl-agl.sh agl-demo-platform-intel-corei7-64.hddimg /dev/sdd"
-
- echo " assuming that iasImage is accessible via your default path"
- exit 1
-}
-
-image_details() {
- IMG=$1
- info "Image details"
- echo " image: $(stat --printf '%N\n' $IMG)"
- echo " size: $(stat -L --printf '%s bytes\n' $IMG)"
- echo " modified: $(stat -L --printf '%y\n' $IMG)"
- echo " type: $(file -L -b $IMG)"
- echo ""
-}
-
-device_details() {
- DEV=$1
- BLOCK_SIZE=512
-
- info "Device details"
- echo " device: $DEVICE"
- if [ -f "/sys/class/block/$DEV/device/vendor" ]; then
- echo " vendor: $(cat /sys/class/block/$DEV/device/vendor)"
- else
- echo " vendor: UNKOWN"
- fi
- if [ -f "/sys/class/block/$DEV/device/model" ]; then
- echo " model: $(cat /sys/class/block/$DEV/device/model)"
- else
- echo " model: UNKNOWN"
- fi
- if [ -f "/sys/class/block/$DEV/size" ]; then
- echo " size: $(($(cat /sys/class/block/$DEV/size) * $BLOCK_SIZE)) bytes"
- else
- echo " size: UNKNOWN"
- fi
- echo ""
-}
-
-unmount_device() {
- grep -q $DEVICE /proc/mounts
- if [ $? -eq 0 ]; then
- warn "$DEVICE listed in /proc/mounts, attempting to unmount"
- umount $DEVICE* 2>/dev/null
- ! grep -q $DEVICE /proc/mounts && info "Unmounted successfully"
- return $?
- fi
- return 0
-}
-
-unmount() {
- if [ "$1" = "" ] ; then
- return 0
- fi
- grep -q $1 /proc/mounts
- if [ $? -eq 0 ]; then
- debug "Unmounting $1"
- umount $1
- ! grep -q $1 /proc/mounts # check if unmounted successfully
- return $?
- fi
- return 0
-}
-
-#
-# Parse and validate arguments
-#
-
-if [ "$1" = "-v" ] ; then
- DEBUG=1
- exec 3>&1
- shift
-fi
-
-if [ "$1" = "-p" ] ; then
- IAS_PATH="$2""/"
- shift 2
-fi
-
-if [ $# -ne 2 ]; then
- usage
-fi
-
-IAS_IMAGE_TOOL="$IAS_PATH$IAS_EXE"
-debug "iasImage tool is: $IAS_IMAGE_TOOL"
-which $IAS_IMAGE_TOOL > IAS_IMAGE_TOOL_PATH
-if [ ! -x "$(command -v $IAS_IMAGE_TOOL)" ]; then
- die "$IAS_IMAGE_TOOL not found pointed by the path via 'sudo; use -p option'"
-fi
-
-HDDIMG=$1
-DEVICE=$2
-
-LINK=$(readlink $DEVICE)
-if [ $? -eq 0 ]; then
- DEVICE="$LINK"
-fi
-
-if [ ! -w "$DEVICE" ]; then
- if [ ! -e "${DEVICE}" ] ; then
- die "Device $DEVICE cannot be found"
- else
- die "Device $DEVICE is not writable (need to run under sudo?)"
- fi
-fi
-
-if [ ! -e "$HDDIMG" ]; then
- die "HDDIMG $HDDIMG does not exist"
-fi
-HDDIMG_EXT=${HDDIMG##*.}
-case $HDDIMG_EXT in
- hddimg)
- IMG_TYPE="MOUNT"
- IMG_COMPRESS="NO"
- debug "Detected: uncompressed image type .hddimg"
- ;;
- wic)
- IMG_TYPE="DISK"
- IMG_COMPRESS="NO"
- debug "Detected: uncompressed image type .wic"
- ;;
- xz)
- IMG_TYPE="DISK"
- IMG_COMPRESS="YES"
- debug "Detected: xz compressed image type .wic"
- command -v xz >/dev/null 2>&1 || { die "xz command is not available, pleaes install xz package"; }
- TMP_SIZE=`df -k $TMP_DIR | awk '/[0-9]%/{print $(NF-2)}'`
- if [ "$TMP_SIZE" -lt "$TMP_SIZE_MIN" ]; then
- die "Available space on $TMP_DIR must be at least $TMP_SIZE_MIN kB"
- fi
- printf "Starting decompression of the image. It may take some time ..."
- xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic $HDDIMG|| \
- die "xz command failled: xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic"
- HDDIMG="$TMP_DIR/TMP-AGL-wic-image.wic"
- echo "Image uncompressed, starting doing real work ..."
- ;;
- *)
- die "Unsupported image format: $HDDIMG_EXT Supported format are .hddimg .wic wic.xz"
- ;;
-esac
-#
-# Ensure the hddimg is not mounted
-#
-debug "will now try to umount /detach previous images"
-case $IMG_TYPE in
- MOUNT)
- unmount "$HDDIMG" || die "Failed to unmount $HDDIMG"
- ;;
- DISK)
- [ `losetup --list |grep $HDDIMG | wc -l ` -gt 1 ] && die "Image mounted more than once, manual cleaning required see: losetup --list"
- debug "ready to attach the wic image to aloop device"
- LOOP_DEVICE=`losetup --find --show $HDDIMG` && ( losetup -d $LOOP_DEVICE 1>&3 2>&1 || die "Detaching $LOOP_DEVICE from $HDDIMG failled")
- ;;
- *)
- die "unknown image format $IMG_TYPE"
- ;;
-esac
-#
-# Check if any $DEVICE partitions are mounted
-#
-unmount_device || die "Failed to unmount $DEVICE"
-
-#
-# Confirm device with user
-#
-image_details $HDDIMG
-device_details $(basename $DEVICE)
-echo -n "${INFO}Prepare ABL image on $DEVICE [y/N]?${CLEAR} "
-read RESPONSE
-if [ "$RESPONSE" != "y" ]; then
- echo "Image creation aborted"
- exit 0
-fi
-
-
-#
-# Prepare the temporary working space
-#
-TMPDIR=$(mktemp -d mkabldisk-XXX) || die "Failed to create temporary mounting directory."
-HDDIMG_MNT=$TMPDIR/hddimg
-debug "TEMPDIR is: $TMPDIR"
-HDDIMG_ROOTFS_MNT=$TMPDIR/hddimg_rootfs
-ROOTFS_MNT=$TMPDIR/rootfs
-BOOTFS_MNT=$TMPDIR/bootfs
-mkdir $HDDIMG_MNT || die "Failed to create $HDDIMG_MNT"
-mkdir $HDDIMG_ROOTFS_MNT || die "Failed to create $HDDIMG_ROOTFS_MNT"
-mkdir $ROOTFS_MNT || die "Failed to create $ROOTFS_MNT"
-mkdir $BOOTFS_MNT || die "Failed to create $BOOTFS_MNT"
-
-
-#
-# Partition $DEVICE
-#
-DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-# If the device size is not reported there may not be a valid label
-if [ "$DEVICE_SIZE" = "" ] ; then
- parted -s $DEVICE mklabel msdos || die "Failed to create MSDOS partition table"
- DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-fi
-ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE))
-ROOTFS_START=$((BOOT_SIZE))
-ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
-
-# MMC devices use a partition prefix character 'p'
-PART_PREFIX=""
-if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
- PART_PREFIX="p"
-fi
-BOOTFS=$DEVICE${PART_PREFIX}1
-ROOTFS=$DEVICE${PART_PREFIX}2
-
-TARGET_PART_PREFIX=""
-if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ]; then
- TARGET_PART_PREFIX="p"
-fi
-TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
-
-echo ""
-info "Boot partition size: $BOOT_SIZE MB ($BOOTFS)"
-info "ROOTFS partition size: $ROOTFS_SIZE MB ($ROOTFS)"
-echo ""
-
-# Use MSDOS by default as GPT cannot be reliably distributed in disk image form
-# as it requires the backup table to be on the last block of the device, which
-# of course varies from device to device.
-
-info "Partitioning installation media ($DEVICE)"
-
-debug "Deleting partition table on $DEVICE"
-dd if=/dev/zero of=$DEVICE bs=512 count=2 1>&3 2>&1 || die "Failed to zero beginning of $DEVICE"
-
-debug "Creating new partition table (MSDOS) on $DEVICE"
-parted -s $DEVICE mklabel msdos 1>&3 2>&1 || die "Failed to create MSDOS partition table"
-
-debug "Creating boot partition on $BOOTFS"
-parted -s $DEVICE mkpart primary 0% $BOOT_SIZE 1>&3 2>&1 || die "Failed to create BOOT partition"
-
-debug "Enabling boot flag on $BOOTFS"
-parted -s $DEVICE set 1 boot on 1>&3 2>&1 || die "Failed to enable boot flag"
-
-debug "Creating ROOTFS partition on $ROOTFS"
-parted -s $DEVICE mkpart primary $ROOTFS_START $ROOTFS_END 1>&3 2>&1 || die "Failed to create ROOTFS partition"
-
-# as blkid does not provide PARTUUID on Ubuntu LTS 14.04 we myst hack via fdisk
-#ROOTFS_PARTUUID=$(blkid |grep -e "$ROOTFS" |sed -n 's/^.*PARTUUID=/PARTUUID=/p')
-export LC_ALL=C
-ROOTFS_DISKID=$(fdisk -l "$DEVICE" | grep -e "Disk identifier" | sed -n 's/^.*Disk identifier: 0x/PARTUUID=/p')
-if [ $ROOTFS_DISKID = "" ]; then
- die "Failed to read DISKID"
-fi
-BOOTFS_PARTUUID="$ROOTFS_DISKID-01"
-ROOTFS_PARTUUID="$ROOTFS_DISKID-02"
-debug "PARTUUID for ROOTFS is $ROOTFS_PARTUUID"
-
-if [ $DEBUG -eq 1 ]; then
- parted -s $DEVICE print
-fi
-
-
-#
-# Check if any $DEVICE partitions are mounted after partitioning
-#
-unmount_device || die "Failed to unmount $DEVICE partitions"
-
-
-#
-# Format $DEVICE partitions
-#
-info "Formatting partitions"
-debug "Formatting $BOOTFS as ext2"
-mkfs.ext2 -F -F -L BOOT $BOOTFS 1>&3 2>&1 || die "Failed to format $BOOTFS"
-
-debug "Formatting $ROOTFS as ext4"
-mkfs.ext4 -F $ROOTFS -L "ROOT" 1>&3 2>&1 || die "Failed to format $ROOTFS"
-
-
-# Mounting image file system on loop devices
-#
-case $IMG_TYPE in
-
- MOUNT)
- debug "Mounting images and device in preparation for installation"
- mount -o loop $HDDIMG $HDDIMG_MNT 1>&3 2>&1 || die "Failed to mount $HDDIMG"
- mount -o loop $HDDIMG_MNT/rootfs.img $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount rootfs.img"
- ;;
- DISK)
- debug "Attaching image and mounting partitions then device in preparation for installation"
- LOOP_DEVICE=`losetup --find` || die "Failled to find an available loop device see: losetup --find"
- losetup -P $LOOP_DEVICE $HDDIMG 1>&3 2>&1 || die "Attaching $LOOP_DEVICE from $HDDIMG failled"
- mount "$LOOP_DEVICE"p2 $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp1 on $HDDIMG_ROOTFS_MNT"
- mount "$LOOP_DEVICE"p1 $HDDIMG_MNT 1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp2 on $HDDIMG_MNT"
- ;;
- *)
- die "unknown image format $IMG_TYPE"
- ;;
-esac
-
-mount $ROOTFS $ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $ROOTFS on $ROOTFS_MNT"
-mount $BOOTFS $BOOTFS_MNT 1>&3 2>&1 || die "Failed to mount $BOOTFS on $BOOTFS_MNT"
-
-info "Preparing boot partition"
-# create the config file for iasImage
-# Remove any existing root= kernel parameters and:
-# o Add a root= parameter with the target rootfs
-# o Specify ro so fsck can be run during boot
-# o Specify rootwait in case the target media is an asyncronous block device
-# such as MMC or USB disks
-# o Specify "quiet" to minimize boot time when using slow serial consoles
-
-# iasImage command line file creation
-echo "root=$ROOTFS_PARTUUID" > $IAS_CMD_LINE
-echo "console=$MRB_DEBUG_TTY" >> $IAS_CMD_LINE
-echo "earlycon=uart8250,mmio32,0xfc000000,115200n8" >> $IAS_CMD_LINE
-echo "rootwait" >> $IAS_CMD_LINE
-echo "video=$MRB_HDMI" >> $IAS_CMD_LINE
-echo "i915.enable_initial_modeset=1" >> $IAS_CMD_LINE
-debug "temp config for iasImage is $IAS_CMD_LINE"
-
-if [ -f $HDDIMG_MNT/vmlinuz ]; then
- KERNEL_TYPE="vmlinuz"
- debug "kernel is vmlinuz"
-fi
-if [ -f $HDDIMG_MNT/bzimage ]; then
- KERNEL_TYPE="bzimage"
- debug "kernel is bzimage -> vmlinuz"
-fi
-if [ -f $HDDIMG_MNT/microcode.cpio ]; then
- warn "initrd=microcode.cpio is not a supported configuration, microcode.cpio has been ignored"
-fi
-[ -z $KERNEL_TYPE ] && die "Linux kernel type in $HDDIMG is unsupported"
-
-if [ -f $HDDIMG_MNT/initrd ];
- then
- info "creating ABL image with initramsfs"
- debug "$IAS_IMAGE_TOOL -o $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE $HDDIMG_MNT/initrd"
- $IAS_IMAGE_TOOL -o $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE $HDDIMG_MNT/initrd
- else
- info "creating ABL image without initramfs"
- debug "$IAS_IMAGE_TOOL -o $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE"
- $IAS_IMAGE_TOOL -o $BOOTFS_MNT/iasImage -i 0x30000 $IAS_CMD_LINE $HDDIMG_MNT/$KERNEL_TYPE
-fi
-
-printf "Copying ROOTFS files ... "
-command -v rsync >/dev/null 2>&1 # check if rsync exists
-if [ $DEBUG -eq 1 ] && [ $? -eq 0 ]; then
- rsync --info=progress2 -h -aHAXW --no-compress $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-else
- cp -a $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-fi
-
-debug "removing any swap entry in /etc/fstab"
-sed --in-place '/swap/d' $ROOTFS_MNT/etc/fstab
-debug "fixing PARTUUID for /boot"
-sed --in-place -e "s#PARTUUID=[0-9a-z-]\+\t/boot#${BOOTFS_PARTUUID}\t/boot#" $ROOTFS_MNT/etc/fstab
-
-printf "flushing data on removable device. May take a while ... "
-sync --file-system $ROOTFS_MNT
-echo done
-
-# We dont want udev to mount our root device while we're booting...
-if [ -d $ROOTFS_MNT/etc/udev/ ] ; then
- echo "$TARGET_DEVICE" >> $ROOTFS_MNT/etc/udev/mount.blacklist
-fi
-
-
-# Call cleanup to unmount devices and images and remove the TMPDIR
-cleanup
-
-echo ""
-if [ $WARNINGS -ne 0 ] && [ $ERRORS -eq 0 ]; then
- echo "${YELLOW}Installation completed with warnings${CLEAR}"
- echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-elif [ $ERRORS -ne 0 ]; then
- echo "${RED}Installation encountered errors${CLEAR}"
- echo "${RED}Errors: $ERRORS${CLEAR}"
- echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-else
- success "Installation completed successfully"
-fi
-echo ""
diff --git a/scripts/mkefi-agl.sh b/scripts/mkefi-agl.sh
deleted file mode 100755
index c44ecedde..000000000
--- a/scripts/mkefi-agl.sh
+++ /dev/null
@@ -1,531 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2012, Intel Corporation.
-# All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Modification from mkefidisk.sh provided by the Yocto project by Dominig
-# to install Automotive Grade Linux (AGL) on Minnowboard and any PC with UEFI boot
-#
-# changes
-# - simpler use model
-# - keep initrd if present
-# - create a grub config with PARTUID to ease boot from various devices automaticaly
-# - add a UEFI startup.nsh script for autoboot
-# - remove any configured swap is fstab
-# - accept .hddimg, wic and wic.xz as sources
-
-LANG=C
-
-# Set to 1 to enable additional output
-DEBUG=0
-exec 3>/dev/null
-
-#
-# Defaults
-#
-# 100 Mb for the boot partition
-BOOT_SIZE=100
-# min available space on TMP_DIR for uncompressing xz image in kB e.g. 5G (5000000)
-TMP_SIZE_MIN=5000000
-# TMP_DIR directory use for holding image file for uncompression (e.g. /tmp or $HOME)
-TMP_DIR=/tmp
-
-# Cleanup after die()
-cleanup() {
- debug "Syncing and unmounting devices"
- # Unmount anything we mounted
- unmount $ROOTFS_MNT || error "Failed to unmount $ROOTFS_MNT"
- unmount $BOOTFS_MNT || error "Failed to unmount $BOOTFS_MNT"
- unmount $HDDIMG_ROOTFS_MNT || error "Failed to unmount $HDDIMG_ROOTFS_MNT"
- unmount $HDDIMG_MNT || error "Failed to unmount $HDDIMG_MNT"
- if [ "$IMG_TYPE" = "DISK" ]; then
- debug "de-attaching loop devices"
- for LOOP_DEVICE in `losetup --list |grep $HDDIMG | cut -d" " -f1` ; do
- losetup -d $LOOP_DEVICE 1>&3 2>&1 || error "Detaching $LOOP_DEVICE from $HDDIMG failled"
- done
- fi
-
- # Remove the TMPDIR
- debug "Removing temporary files"
- if [ -d "$TMPDIR" ]; then
- rm -rf "$TMPDIR" || error "Failed to remove $TMPDIR"
- fi
- [ -f "$TMP_DIR/TMP-AGL-wic-image.wic" ] && rm -f $TMP_DIR/TMP-AGL-wic-image.wic
-}
-
-trap 'die "Signal Received, Aborting..."' HUP INT TERM
-
-# Logging routines
-WARNINGS=0
-ERRORS=0
-CLEAR="$(tput sgr0)"
-INFO="$(tput bold)"
-RED="$(tput setaf 1)$(tput bold)"
-GREEN="$(tput setaf 2)$(tput bold)"
-YELLOW="$(tput setaf 3)$(tput bold)"
-info() {
- echo "${INFO}$1${CLEAR}"
-}
-error() {
- ERRORS=$((ERRORS+1))
- echo "${RED}$1${CLEAR}"
-}
-warn() {
- WARNINGS=$((WARNINGS+1))
- echo "${YELLOW}$1${CLEAR}"
-}
-success() {
- echo "${GREEN}$1${CLEAR}"
-}
-die() {
- error "$1"
- cleanup
- exit 1
-}
-debug() {
- if [ $DEBUG -eq 1 ]; then
- echo "$1"
- fi
-}
-
-usage() {
- echo "Install AGL on a removable device to boot on IA UEFI based computer"
- echo "In particular is can create USB or SD bootable support for Minnowboard"
- echo ""
- echo "Usage: $(basename $0) [-v] IDSK_IMAGE REMOVABLE_DEVICE"
- echo " -v: Verbose debug"
- echo " HDDIMG: The DISK_IMAGE file generated by Yocto the efi disk from"
- echo " Supported formats are .hddimg, .wic .wic.xz"
- echo " REMOVABLE_DEVICE: The block device to write the image to, e.g. /dev/sdh"
- echo "ex:"
- echo " mkefi-agl.sh agl-demo-platform-intel-corei7-64.hddimg /dev/sdd"
- echo " mkefi-agl.sh agl-demo-platform-intel-corei7-64.wic.xz /dev/sdd"
- exit 1
-}
-
-image_details() {
- IMG=$1
- info "Image details"
- echo " image: $(stat --printf '%N\n' $IMG)"
- echo " size: $(stat -L --printf '%s bytes\n' $IMG)"
- echo " modified: $(stat -L --printf '%y\n' $IMG)"
- echo " type: $(file -L -b $IMG)"
- echo ""
-}
-
-device_details() {
- DEV=$1
- BLOCK_SIZE=512
-
- info "Device details"
- echo " device: $DEVICE"
- if [ -f "/sys/class/block/$DEV/device/vendor" ]; then
- echo " vendor: $(cat /sys/class/block/$DEV/device/vendor)"
- else
- echo " vendor: UNKOWN"
- fi
- if [ -f "/sys/class/block/$DEV/device/model" ]; then
- echo " model: $(cat /sys/class/block/$DEV/device/model)"
- else
- echo " model: UNKNOWN"
- fi
- if [ -f "/sys/class/block/$DEV/size" ]; then
- echo " size: $(($(cat /sys/class/block/$DEV/size) * $BLOCK_SIZE)) bytes"
- else
- echo " size: UNKNOWN"
- fi
- echo ""
-}
-
-unmount_device() {
- grep -q $DEVICE /proc/mounts
- if [ $? -eq 0 ]; then
- warn "$DEVICE listed in /proc/mounts, attempting to unmount"
- umount $DEVICE* 2>/dev/null
- ! grep -q $DEVICE /proc/mounts && info "Unmounted successfully"
- return $?
- fi
- return 0
-}
-
-unmount() {
- if [ "$1" = "" ] ; then
- return 0
- fi
- grep -q $1 /proc/mounts
- if [ $? -eq 0 ]; then
- debug "Unmounting $1"
- umount $1
- ! grep -q $1 /proc/mounts # check if unmounted successfully
- return $?
- fi
- return 0
-}
-
-#
-# Parse and validate arguments
-#
-if [ "$1" != "-v" ] && [ $# -ne 2 ]; then
- usage
-fi
-if [ "$1" = "-v" ] && [ $# -ne 3 ]; then
- usage
-fi
-
-if [ "$1" = "-v" ] ; then
- DEBUG=1
- exec 3>&1
- shift
-fi
-
-HDDIMG=$1
-DEVICE=$2
-
-LINK=$(readlink $DEVICE)
-if [ $? -eq 0 ]; then
- DEVICE="$LINK"
-fi
-
-if [ ! -w "$DEVICE" ]; then
- if [ ! -e "${DEVICE}" ] ; then
- die "Device $DEVICE cannot be found"
- else
- die "Device $DEVICE is not writable (need to run under sudo?)"
- fi
-fi
-
-if [ ! -e "$HDDIMG" ]; then
- die "HDDIMG $HDDIMG does not exist"
-fi
-HDDIMG_EXT=${HDDIMG##*.}
-case $HDDIMG_EXT in
- hddimg)
- IMG_TYPE="MOUNT"
- IMG_COMPRESS="NO"
- debug "Detected: uncompressed image type .hddimg"
- ;;
- wic)
- IMG_TYPE="DISK"
- IMG_COMPRESS="NO"
- debug "Detected: uncompressed image type .wic"
- ;;
- xz)
- IMG_TYPE="DISK"
- IMG_COMPRESS="YES"
- debug "Detected: xz compressed image type .wic"
- command -v xz >/dev/null 2>&1 || { die "xz command is not available, pleaes install xz package"; }
- TMP_SIZE=`df -k $TMP_DIR | awk '/[0-9]%/{print $(NF-2)}'`
- if [ "$TMP_SIZE" -lt "$TMP_SIZE_MIN" ]; then
- die "Available space on $TMP_DIR must be at least $TMP_SIZE_MIN kB"
- fi
- printf "Starting decompression of the image. It may take some time ..."
- xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic $HDDIMG|| \
- die "xz command failled: xz --decompress --keep --format=auto --force --threads=0 --stdout > $TMP_DIR/TMP-AGL-wic-image.wic"
- HDDIMG="$TMP_DIR/TMP-AGL-wic-image.wic"
- echo "Image uncompressed, starting doing real work ..."
- ;;
- *)
- die "Unsupported image format: $HDDIMG_EXT Supported format are .hddimg .wic wic.xz"
- ;;
-esac
-
-#
-# Ensure the hddimg is not mounted
-#
-debug "will now try to umount /detach previous images"
-case $IMG_TYPE in
- MOUNT)
- unmount "$HDDIMG" || die "Failed to unmount $HDDIMG"
- ;;
- DISK)
- [ `losetup --list |grep $HDDIMG | wc -l ` -gt 1 ] && die "Image mounted more than once, manual cleaning required see: losetup --list"
- debug "ready to attach the wic image to aloop device"
- LOOP_DEVICE=`losetup --find --show $HDDIMG` && ( losetup -d $LOOP_DEVICE 1>&3 2>&1 || die "Detaching $LOOP_DEVICE from $HDDIMG failled")
- ;;
- *)
- die "unknown image format $IMG_TYPE"
- ;;
-esac
-
-#
-# Check if any $DEVICE partitions are mounted
-#
-unmount_device || die "Failed to unmount $DEVICE"
-
-#
-# Confirm device with user
-#
-image_details $HDDIMG
-device_details $(basename $DEVICE)
-echo -n "${INFO}Prepare EFI image on $DEVICE [y/N]?${CLEAR} "
-read RESPONSE
-if [ "$RESPONSE" != "y" ]; then
- die "Image creation aborted"
-fi
-
-
-#
-# Prepare the temporary working space
-#
-TMPDIR=$(mktemp -d mkefidisk-XXX) || die "Failed to create temporary mounting directory."
-HDDIMG_MNT=$TMPDIR/hddimg
-HDDIMG_ROOTFS_MNT=$TMPDIR/hddimg_rootfs
-ROOTFS_MNT=$TMPDIR/rootfs
-BOOTFS_MNT=$TMPDIR/bootfs
-mkdir $HDDIMG_MNT || die "Failed to create $HDDIMG_MNT"
-mkdir $HDDIMG_ROOTFS_MNT || die "Failed to create $HDDIMG_ROOTFS_MNT"
-mkdir $ROOTFS_MNT || die "Failed to create $ROOTFS_MNT"
-mkdir $BOOTFS_MNT || die "Failed to create $BOOTFS_MNT"
-
-
-#
-# Partition $DEVICE
-#
-DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-# If the device size is not reported there may not be a valid label
-if [ "$DEVICE_SIZE" = "" ] ; then
- parted -s $DEVICE mklabel msdos || die "Failed to create MSDOS partition table"
- DEVICE_SIZE=$(parted -s $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
-fi
-ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE))
-ROOTFS_START=$((BOOT_SIZE))
-ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
-
-# MMC devices use a partition prefix character 'p'
-PART_PREFIX=""
-if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/nvme0n}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
- PART_PREFIX="p"
-fi
-BOOTFS=$DEVICE${PART_PREFIX}1
-ROOTFS=$DEVICE${PART_PREFIX}2
-
-TARGET_PART_PREFIX=""
-if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ] || [ ! "${TARGET_DEVICE#/dev/nvme0n}" = "${TARGET_DEVICE}" ]; then
- TARGET_PART_PREFIX="p"
-fi
-TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
-
-echo ""
-info "Boot partition size: $BOOT_SIZE MB ($BOOTFS)"
-info "ROOTFS partition size: $ROOTFS_SIZE MB ($ROOTFS)"
-echo ""
-
-# Use MSDOS by default as GPT cannot be reliably distributed in disk image form
-# as it requires the backup table to be on the last block of the device, which
-# of course varies from device to device.
-
-info "Partitioning installation media ($DEVICE)"
-
-debug "Deleting partition table on $DEVICE"
-dd if=/dev/zero of=$DEVICE bs=512 count=2 1>&3 2>&1 || die "Failed to zero beginning of $DEVICE"
-
-debug "Creating new partition table (MSDOS) on $DEVICE"
-parted -s $DEVICE mklabel msdos 1>&3 2>&1 || die "Failed to create MSDOS partition table"
-
-debug "Creating boot partition on $BOOTFS"
-parted -s $DEVICE mkpart primary 0% $BOOT_SIZE 1>&3 2>&1 || die "Failed to create BOOT partition"
-
-debug "Enabling boot flag on $BOOTFS"
-parted -s $DEVICE set 1 boot on 1>&3 2>&1 || die "Failed to enable boot flag"
-
-debug "Creating ROOTFS partition on $ROOTFS"
-parted -s $DEVICE mkpart primary $ROOTFS_START $ROOTFS_END 1>&3 2>&1 || die "Failed to create ROOTFS partition"
-
-# as blkid does not provide PARTUUID on Ubuntu LTS 14.04 we myst hack via fdisk
-#ROOTFS_PARTUUID=$(blkid |grep -e "$ROOTFS" |sed -n 's/^.*PARTUUID=/PARTUUID=/p')
-export LC_ALL=C
-ROOTFS_DISKID=$(fdisk -l "$DEVICE" | grep -e "Disk identifier" | sed -n 's/^.*Disk identifier: 0x/PARTUUID=/p')
-if [ $ROOTFS_DISKID = "" ]; then
- die "Failed to read DISKID"
-fi
-BOOTFS_PARTUUID="$ROOTFS_DISKID-01"
-ROOTFS_PARTUUID="$ROOTFS_DISKID-02"
-debug "PARTUUID for ROOTFS is $ROOTFS_PARTUUID"
-
-if [ $DEBUG -eq 1 ]; then
- parted -s $DEVICE print
-fi
-
-
-#
-# Check if any $DEVICE partitions are mounted after partitioning
-#
-unmount_device || die "Failed to unmount $DEVICE partitions"
-
-
-#
-# Format $DEVICE partitions
-#
-info "Formatting partitions"
-debug "Formatting $BOOTFS as vfat"
-if [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
- mkfs.vfat -I $BOOTFS -n "EFI" 1>&3 2>&1 || die "Failed to format $BOOTFS"
-else
- mkfs.vfat $BOOTFS -n "EFI" 1>&3 2>&1 || die "Failed to format $BOOTFS"
-fi
-
-debug "Formatting $ROOTFS as ext4"
-mkfs.ext4 -F $ROOTFS -L "ROOT" 1>&3 2>&1 || die "Failed to format $ROOTFS"
-
-
-#
-# Mounting image file system on loop devices
-#
-case $IMG_TYPE in
-
- MOUNT)
- debug "Mounting images and device in preparation for installation"
- mount -o loop $HDDIMG $HDDIMG_MNT 1>&3 2>&1 || die "Failed to mount $HDDIMG"
- mount -o loop $HDDIMG_MNT/rootfs.img $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount rootfs.img"
- ;;
- DISK)
- debug "Attaching image and mounting partitions then device in preparation for installation"
- LOOP_DEVICE=`losetup --find` || die "Failled to find an available loop device see: losetup --find"
- losetup -P $LOOP_DEVICE $HDDIMG 1>&3 2>&1 || die "Attaching $LOOP_DEVICE from $HDDIMG failled"
- mount "$LOOP_DEVICE"p2 $HDDIMG_ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp1 on $HDDIMG_ROOTFS_MNT"
- mount "$LOOP_DEVICE"p1 $HDDIMG_MNT 1>&3 2>&1 || die "Failed to mount $LOOP_DEVICEp2 on $HDDIMG_MNT"
- ;;
- *)
- die "unknown image format $IMG_TYPE"
- ;;
-esac
-# Mount removable device
- mount $ROOTFS $ROOTFS_MNT 1>&3 2>&1 || die "Failed to mount $ROOTFS on $ROOTFS_MNT"
- mount $BOOTFS $BOOTFS_MNT 1>&3 2>&1 || die "Failed to mount $BOOTFS on $BOOTFS_MNT"
-
-
-info "Preparing boot partition"
-EFIDIR="$BOOTFS_MNT/EFI/BOOT"
-if [ -f $HDDIMG_MNT/vmlinuz ]; then
- cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy vmlinuz"
- KERNEL_TYPE="VMLINUZ"
- debug "kernel is vmlinuz"
-fi
-if [ -f $HDDIMG_MNT/bzimage ]; then
- cp $HDDIMG_MNT/bzimage $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy bzimage"
- KERNEL_TYPE="BZIMAGE"
- debug "kernel is bzimage"
-fi
-if [ -f $HDDIMG_MNT/microcode.cpio ]; then
- cp $HDDIMG_MNT/microcode.cpio $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy microcode.cpio"
- debug "microcode.cpio copied"
-fi
-[ -z $KERNEL_TYPE ] && die "Linux kernel type in $HDDIMG is unsupported"
-
-if [ -f $HDDIMG_MNT/initrd ]
- then
- echo "initrd detected"
- cp $HDDIMG_MNT/initrd $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy initrd"
- else
- warn "initrd missing"
-fi
-echo "bootx64.efi" > $BOOTFS_MNT/startup.nsh || die "Failed to create startup.nsh"
-# Copy the efi loader and configs (booti*.efi and grub.cfg if it exists)
-cp -r $HDDIMG_MNT/EFI $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy EFI dir"
-# Silently ignore a missing systemd-boot or gummiboot loader dir (we might just be a GRUB image)
-cp -r $HDDIMG_MNT/loader $BOOTFS_MNT 1>&3 2>&1
-
-# Update the boot loaders configurations for an installed image
-# Remove any existing root= kernel parameters and:
-# o Add a root= parameter with the target rootfs
-# o Specify ro so fsck can be run during boot
-# o Specify rootwait in case the target media is an asyncronous block device
-# such as MMC or USB disks
-# o Specify "quiet" to minimize boot time when using slow serial consoles
-
-# Look for a GRUB installation
-GRUB_CFG="$EFIDIR/grub.cfg"
-if [ -e "$GRUB_CFG" ]; then
- info "Configuring GRUB"
- # Delete the install entry
- sed -i "/menuentry 'install'/,/^}/d" $GRUB_CFG
- # Delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GRUB_CFG
- # detect config initrd=microcode.cpio
- if grep -q microcode $GRUB_CFG; then
- warn "initrd=microcode.cpio detected, might not work on all boot configurations"
- fi
- sed -i "s@ root=[^ ]*@ @" $GRUB_CFG
- sed -i "s@vmlinuz @vmlinuz root=$ROOTFS_PARTUUID @" $GRUB_CFG
-fi
-
-# look for a systemd-boot loader.conf file and create a default boot entry
-SYSTEMDBOOT_CFG="$BOOTFS_MNT/loader/loader.conf"
-if [ -e "$SYSTEMDBOOT_CFG" ]; then
- info "Configuring SYSTEMD-BOOT"
- SYSTEMDBOOT_BOOT="$BOOTFS_MNT/loader/entries/boot.conf"
- SYSTEMDBOOT_DEBUG="$BOOTFS_MNT/loader/entries/debug.conf"
- # Delete the install entry
- sed -i "/menuentry 'install'/,/^}/d" $SYSTEMDBOOT_CFG
- rm -rf "$BOOTFS_MNT/loader/entries/install.conf" 1>&3 2>&1
- # Add PARTUUID to the boot entry file
- if [ ! -e "$SYSTEMDBOOT_BOOT" ]; then
- die "no boot.conf entry found in systemd-boot directories"
- fi
- # Delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_BOOT
- # detect config initrd=microcode.cpio
- if grep -q microcode $SYSTEMDBOOT_BOOT; then
- warn "initrd=microcode.cpio detected, might not work on all boot configurations"
- fi
- sed -i "s@ root=[^ ]*@ @" $SYSTEMDBOOT_BOOT
- sed -i "s@options @options root=$ROOTFS_PARTUUID @" $SYSTEMDBOOT_BOOT
-fi
-
-
-# Ensure we have at least one EFI bootloader configured
-if [ ! -e $GRUB_CFG ] && [ ! -e $SYSTEMDBOOT_CFG ] ; then
- die "No EFI bootloader configuration found"
-fi
-
-printf "Copying ROOTFS files ... "
-command -v rsync >/dev/null 2>&1 # check if rsync exists
-if [ $DEBUG -eq 1 ] && [ $? -eq 0 ]; then
- rsync --info=progress2 -h -aHAXW --no-compress $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-else
- cp -a $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT 1>&3 2>&1 || die "Root FS copy failed"
-fi
-debug "removing any swap entry in /etc/fstab"
-sed --in-place '/swap/d' $ROOTFS_MNT/etc/fstab
-debug "fixing PARTUUID for /boot"
-sed --in-place -e "s#PARTUUID=[0-9a-z-]\+\t/boot#${BOOTFS_PARTUUID}\t/boot#" $ROOTFS_MNT/etc/fstab
-
-printf "flushing data on removable device. May take a while ... "
-sync --file-system $ROOTFS_MNT
-echo done
-
-# We dont want udev to mount our root device while we're booting...
-if [ -d $ROOTFS_MNT/etc/udev/ ] ; then
- echo "$TARGET_DEVICE" >> $ROOTFS_MNT/etc/udev/mount.blacklist
-fi
-
-
-# Call cleanup to unmount devices and images and remove the TMPDIR
-cleanup
-
-echo ""
-if [ $WARNINGS -ne 0 ] && [ $ERRORS -eq 0 ]; then
- echo "${YELLOW}Installation completed with warnings${CLEAR}"
- echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-elif [ $ERRORS -ne 0 ]; then
- echo "${RED}Installation encountered errors${CLEAR}"
- echo "${RED}Errors: $ERRORS${CLEAR}"
- echo "${YELLOW}Warnings: $WARNINGS${CLEAR}"
-else
- success "Installation completed successfully"
-fi
-echo ""