diff options
| -rw-r--r-- | scripts/envsetup.sh | 33 | ||||
| -rw-r--r-- | templates/intel-corei7-64/conf/bblayers.conf.sample (renamed from meta-agl/conf/bblayers.conf.sample) | 0 | ||||
| -rw-r--r-- | templates/intel-corei7-64/conf/conf-notes.txt (renamed from meta-agl/conf/conf-notes.txt) | 0 | ||||
| -rw-r--r-- | templates/intel-corei7-64/conf/local.conf.sample | 254 | ||||
| -rw-r--r-- | templates/qemux86-64/conf/bblayers.conf.sample | 22 | ||||
| -rw-r--r-- | templates/qemux86-64/conf/conf-notes.txt | 6 | ||||
| -rw-r--r-- | templates/qemux86-64/conf/local.conf.sample (renamed from meta-agl/conf/local.conf.sample) | 14 | ||||
| -rw-r--r-- | templates/qemux86/conf/bblayers.conf.sample | 22 | ||||
| -rw-r--r-- | templates/qemux86/conf/conf-notes.txt | 6 | ||||
| -rw-r--r-- | templates/qemux86/conf/local.conf.sample | 253 |
10 files changed, 591 insertions, 19 deletions
diff --git a/scripts/envsetup.sh b/scripts/envsetup.sh index adde54010..89713d968 100644 --- a/scripts/envsetup.sh +++ b/scripts/envsetup.sh @@ -5,7 +5,14 @@ if [ -z $1 ]; then return 1 fi -case "$1" in +MACHINE="$1" + +# set template conf for each <board/device> +if [ -z "$TEMPLATECONF" ]; then + TEMPLATECONF="$PWD/meta-agl-demo/templates/$MACHINE/conf" +fi + +case "$MACHINE" in "porter") # setup proprietary gfx drivers and multimedia packages COPY_MM_SCRIPT=meta-renesas/meta-rcar-gen2/scripts/setup_mm_packages.sh @@ -18,28 +25,30 @@ case "$1" in fi fi - # template conf for R-Car2 M2 Porter board - TEMPLATECONF=$PWD/meta-renesas/meta-rcar-gen2/conf + if [ ! -d "$TEMPLATECONF" ]; then + # set template conf for R-Car2 M2 Porter board + TEMPLATECONF="$PWD/meta-renesas/meta-rcar-gen2/conf" + fi ;; "intel-corei7-64") - # template conf for MinnowBoard MAX - TEMPLATECONF=$PWD/meta-agl-demo/conf + ;; + "qemux86") ;; "qemux86-64") - # template conf for QEMU x86-64 - TEMPLATECONF=$PWD/meta-agl-demo/conf ;; *) # nothing to do here - echo "WARN: '$1' is not tested by AGL Distro" - if [ -z $TEMPLATECONF ]; then - TEMPLATECONF=$PWD/meta-agl-demo/conf - fi + echo "WARN: '$MACHINE' is not tested by AGL Distro" ;; esac echo "envsetup: Set '$1 as MACHINE." -export MACHINE="$1" +export MACHINE + +if [ ! -d "$TEMPLATECONF" ]; then + # Allow to use templates at meta-agl-demo/conf + TEMPLATECONF="$PWD/meta-agl-demo/conf" +fi echo "envsetup: Using templates for local.conf & bblayers.conf from :" echo " '$TEMPLATECONF'" diff --git a/meta-agl/conf/bblayers.conf.sample b/templates/intel-corei7-64/conf/bblayers.conf.sample index 668f0fe98..668f0fe98 100644 --- a/meta-agl/conf/bblayers.conf.sample +++ b/templates/intel-corei7-64/conf/bblayers.conf.sample diff --git a/meta-agl/conf/conf-notes.txt b/templates/intel-corei7-64/conf/conf-notes.txt index f91379f98..f91379f98 100644 --- a/meta-agl/conf/conf-notes.txt +++ b/templates/intel-corei7-64/conf/conf-notes.txt diff --git a/templates/intel-corei7-64/conf/local.conf.sample b/templates/intel-corei7-64/conf/local.conf.sample new file mode 100644 index 000000000..325d5976a --- /dev/null +++ b/templates/intel-corei7-64/conf/local.conf.sample @@ -0,0 +1,254 @@ +# Machine Selection: MinnowBoard MAX +MACHINE ?= "intel-corei7-64" + +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "qemux86-64" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +#DISTRO ?= "poky" +DISTRO ?= "poky-agl" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK/ADT target architecture +# +# This variable specifies the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. This assumes there is a +# libsdl library available on your build system. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +ASSUME_PROVIDED += "libsdl-native" + +############### +# +# AGL specifics +# +############### + +# AGL includes all kernel modules here for ease-of-use during development. +# Comment this out to be able to select the kernel modules yourself. +IMAGE_INSTALL_append = " kernel-modules" + +# Likewise as we included all kernel modules by default in the filesystem, +# we do not need a separate tarball stored. +# Comment this out to receive the separate modules tarbal again. +MODULE_TARBALL_DEPLOY ?= "0" + +############### +# /END AGL +############### + + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" diff --git a/templates/qemux86-64/conf/bblayers.conf.sample b/templates/qemux86-64/conf/bblayers.conf.sample new file mode 100644 index 000000000..e5e54431c --- /dev/null +++ b/templates/qemux86-64/conf/bblayers.conf.sample @@ -0,0 +1,22 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "6" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/meta-yocto-bsp \ + ##OEROOT##/../meta-agl/meta-ivi-common \ + ##OEROOT##/../meta-agl/meta-agl \ + ##OEROOT##/../meta-agl/meta-agl-bsp \ + ##OEROOT##/../meta-openembedded/meta-oe \ + ##OEROOT##/../meta-openembedded/meta-multimedia \ + " +BBLAYERS_NON_REMOVABLE ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/../meta-agl/meta-agl \ + " diff --git a/templates/qemux86-64/conf/conf-notes.txt b/templates/qemux86-64/conf/conf-notes.txt new file mode 100644 index 000000000..f91379f98 --- /dev/null +++ b/templates/qemux86-64/conf/conf-notes.txt @@ -0,0 +1,6 @@ +Common targets are: + agl-image-ivi + agl-image-ivi-crosssdk + + agl-image-minimal + agl-image-weston diff --git a/meta-agl/conf/local.conf.sample b/templates/qemux86-64/conf/local.conf.sample index 5be9aa207..c2da6e6be 100644 --- a/meta-agl/conf/local.conf.sample +++ b/templates/qemux86-64/conf/local.conf.sample @@ -110,7 +110,7 @@ PACKAGE_CLASSES ?= "package_rpm" # SDK/ADT target architecture # # This variable specifies the architecture to build SDK/ADT items for and means -# you can build the SDK packages for architectures other than the machine you are +# you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). # Supported values are i686 and x86_64 #SDKMACHINE ?= "i686" @@ -118,7 +118,7 @@ PACKAGE_CLASSES ?= "package_rpm" # # Extra image configuration defaults # -# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated # images. Some of these options are added to certain image types automatically. The # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages @@ -143,7 +143,7 @@ EXTRA_IMAGE_FEATURES = "debug-tweaks" # Additional image features # # The following is a list of additional classes to use when building images which -# enable extra features. Some available options which can be included in this variable +# enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics # - 'image-mklibs' to reduce shared library files size for an image @@ -194,18 +194,18 @@ BB_DISKMON_DIRS = "\ STOPTASKS,${SSTATE_DIR},1G,100K \ ABORT,${TMPDIR},100M,1K \ ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K" + ABORT,${SSTATE_DIR},100M,1K" # # Shared-state files from other locations # -# As mentioned above, shared state files are prebuilt cache data objects which can +# As mentioned above, shared state files are prebuilt cache data objects which can # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # # This can be a filesystem directory, or a remote url such as http or ftp. These -# would contain the sstate-cache results from previous builds (possibly from other -# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH # at the end as shown in the examples below. This will be substituted with the diff --git a/templates/qemux86/conf/bblayers.conf.sample b/templates/qemux86/conf/bblayers.conf.sample new file mode 100644 index 000000000..e5e54431c --- /dev/null +++ b/templates/qemux86/conf/bblayers.conf.sample @@ -0,0 +1,22 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "6" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/meta-yocto-bsp \ + ##OEROOT##/../meta-agl/meta-ivi-common \ + ##OEROOT##/../meta-agl/meta-agl \ + ##OEROOT##/../meta-agl/meta-agl-bsp \ + ##OEROOT##/../meta-openembedded/meta-oe \ + ##OEROOT##/../meta-openembedded/meta-multimedia \ + " +BBLAYERS_NON_REMOVABLE ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/../meta-agl/meta-agl \ + " diff --git a/templates/qemux86/conf/conf-notes.txt b/templates/qemux86/conf/conf-notes.txt new file mode 100644 index 000000000..f91379f98 --- /dev/null +++ b/templates/qemux86/conf/conf-notes.txt @@ -0,0 +1,6 @@ +Common targets are: + agl-image-ivi + agl-image-ivi-crosssdk + + agl-image-minimal + agl-image-weston diff --git a/templates/qemux86/conf/local.conf.sample b/templates/qemux86/conf/local.conf.sample new file mode 100644 index 000000000..1dc84f5b7 --- /dev/null +++ b/templates/qemux86/conf/local.conf.sample @@ -0,0 +1,253 @@ +# Machine Selection: QEMUx86 +MACHINE ?= "qemux86" +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "qemux86-64" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +#DISTRO ?= "poky" +DISTRO ?= "poky-agl" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK/ADT target architecture +# +# This variable specifies the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. This assumes there is a +# libsdl library available on your build system. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +ASSUME_PROVIDED += "libsdl-native" + +############### +# +# AGL specifics +# +############### + +# AGL includes all kernel modules here for ease-of-use during development. +# Comment this out to be able to select the kernel modules yourself. +IMAGE_INSTALL_append = " kernel-modules" + +# Likewise as we included all kernel modules by default in the filesystem, +# we do not need a separate tarball stored. +# Comment this out to receive the separate modules tarbal again. +MODULE_TARBALL_DEPLOY ?= "0" + +############### +# /END AGL +############### + + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" |