diff options
| -rw-r--r-- | meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass | 113 |
1 files changed, 0 insertions, 113 deletions
diff --git a/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass b/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass deleted file mode 100644 index 725ada89d..000000000 --- a/meta-agl-bsp/classes/sdcard_image-rpi-gdp.bbclass +++ /dev/null @@ -1,113 +0,0 @@ -inherit sdcard_image-rpi - -IMAGE_CMD_rpi-sdimg () { - - # Get rootfs size - if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz" - then - ROOTPART_SIZE=`xz -l --robot ${SDIMG_ROOTFS} | grep "^file" | cut -f` - else - ROOTPART_SIZE=`du -Lb ${SDIMG_ROOTFS} | cut -f1` - fi - - ROOTPART_SIZE=$(expr ${ROOTPART_SIZE} / 1024) - - # just in case our file system block size is not a multiple of 1KiB - if [ $(expr ${ROOTPART_SIZE} % 1024) != 0 ]; - then - ROOTPART_SIZE=$(expr ${ROOTPART_SIZE} + 1) - fi - - # Align partitions - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) - SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTPART_SIZE) - - echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTPART_SIZE KiB" - - # Check if we are building with device tree support - DTS="${@get_dts(d, None)}" - - # Initialize sdcard image file - dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE} - - # Create partition table - parted -s ${SDIMG} mklabel msdos - # Create boot partition and mark it as bootable - parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) - parted -s ${SDIMG} set 1 boot on - # Create rootfs partition to the end of disk - parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s - parted ${SDIMG} print - - # Create a vfat image with boot files - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }') - rm -f ${WORKDIR}/boot.img - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/ - case "${KERNEL_IMAGETYPE}" in - "uImage") - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.img ::${SDIMG_KERNELIMAGE} - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage - ;; - *) - if test -n "${DTS}"; then - # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder - DT_OVERLAYS="${@split_overlays(d, 0)}" - DT_ROOT="${@split_overlays(d, 1)}" - - # Copy board device trees to root folder - for DTB in ${DT_ROOT}; do - DTB_BASE_NAME=`basename ${DTB} .dtb` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb - done - - # Copy device tree overlays to dedicated folder - mmd -i ${WORKDIR}/boot.img overlays - for DTB in ${DT_OVERLAYS}; do - DTB_EXT=${DTB##*.} - DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT} - done - fi - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE} - ;; - esac - - if [ -n ${FATPAYLOAD} ] ; then - echo "Copying payload into VFAT" - for entry in ${FATPAYLOAD} ; do - # add the || true to stop aborting on vfat issues like not supporting .~lock files - mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true - done - fi - - # Add stamp file - echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info - mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info :: - - # Burn Partitions - dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - # If SDIMG_ROOTFS_TYPE is a .xz file use xzcat - if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz" - then - xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - else - dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - fi - - # Optionally apply compression - case "${SDIMG_COMPRESSION}" in - "gzip") - gzip -k9 "${SDIMG}" - ;; - "bzip2") - bzip2 -k9 "${SDIMG}" - ;; - "xz") - xz -k "${SDIMG}" - ;; - esac -} |