diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 85 |
1 files changed, 83 insertions, 2 deletions
@@ -15,6 +15,12 @@ URI: git://git.openembedded.org/meta-openembedded > branch: dizzy > revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97 +## The Renesas R-Car Gen2 (Porter) board depends in addition on: ## + +URI: https://gerrit.automotivelinux.org/gerrit/p/AGL/meta-renesas.git +> branch: agl-1.0-bsp-1.8.0 +> revision: 0a69b07cfca17d1435f2bc7bf779139c5fac09a3 + Layers ------ @@ -22,7 +28,7 @@ There are 2 sub-layers in top-level `meta-agl`. `meta-agl` is a layer which contains AGL common and middleware packages. > meta-agl/meta-agl - + `meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU). > meta-agl/meta-agl-bsp @@ -55,6 +61,7 @@ Supported Machine ----------------- * QEMU (x86-64) - emulated machine: qemux86-64 +* Renesas R-Car Gen2 (R-Car M2) - machine: porter Supported Target of bitbake ------------------------ @@ -64,6 +71,24 @@ Supported Target of bitbake * `agl-image-minimal` For internal use to develop distribution (experimental) * `agl-image-weston` For internal use to develop distribution (experimental) +Supposed Directory Trees of Layers to build +------------------------------------------- + +* For QEMU + + ${TOPDIR}/ + meta-agl/ + meta-openembedded/ + poky/ + +* For R-Car M2 + + ${TOPDIR}/ + meta-agl/ + meta-openembedded/ + meta-renesas/ + poky/ + Build a QEMU image ------------------ @@ -72,7 +97,7 @@ You can build a QEMU image using the following steps: 1. Export TEMPLATECONF to pick up correct configuration for the build > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf -2. Rune the following command: +2. Run the following command: > $ source poky/oe-init-build-env 3. Build the minimal image of AGL Distribution @@ -85,3 +110,59 @@ You can build a QEMU image using the following steps: > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode_option=1280x720-32" 5. Some weston samples are available from weston terminal. + +Build a R-Car M2 (porter) image +------------------------------- + +### Software setup + +#### Obtain and Install Renesas Graphics Drivers + +See [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#M2_Porter_low_cost_board) and get 2 ZIP files from the link there. + +Note: You have to copy files manually because there is no shell-script +in the current meta-renesas. + +1. Unzip the two downloads into a folder. In this example a temporary directory is used. + $ cd $HOME/AGL + $ mkdir binary-tmp + $ <unzip the two downloads into binary-tmp> + + After this step there should be two files in binary-tmp: + R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz + R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz + +2. Extract 2 tar.gz + tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz + tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz + +3. Copy 2 files manually + 1. Locate EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 in the graphics + driver deliverable and copy it into the BSP layer. (need rename) + cp <path_to_file>/EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \ + meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\ + gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2 + + 2. Locate SGX_KM_M2.tar.bz2 in the graphics driver deliverable and copy + it into the BSP layer. + cp <path_to_file>SGX_KM_M2.tar.bz2 \ + meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module + +#### Build from the Source code + +You can build a R-Car2 M2 (porter) image using the following steps: + +1. Export TEMPLATECONF to pick up correct configuration for the build + > $ export TEMPLATECONF=/full/path/to/meta-renesas/meta-rcar-gen2/conf + +2. Run the following command: + > $ source poky/oe-init-build-env + +3. Build the minimal image of AGL Distribution + > $ bitbake agl-image-ivi + +### Deployment (SDCARD) + +Follow the instructions [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29) + +Note: Use `agl-image-ivi-porter.tar.bz2` as name of root file system archive. |