diff options
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd')
| -rw-r--r-- | meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd deleted file mode 100644 index 24cfb1658..000000000 --- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd +++ /dev/null @@ -1,45 +0,0 @@ -# -# SPDX-License-Identifier: MIT -# -# Copyright (c) 2020, MERA -# -# Author: Leonid Lazarev -# -# Xen Boot Script -# -# https://www.raspberrypi.org/documentation/configuration/device-tree.md -# We do not set fdt_addr, because device tree initially is loaded by raspberry pi firmware loader and the particular -# modification are performed. The prepared DTS is propagated to u-boot and this prepared device tree has to be reused. - -setenv kernel_addr_r 0x00480000 # 16M -setenv xen_addr_r 0x00200000 # 2M - -# Load xen to ${xen_addr_r}. -fatload mmc 0:1 ${xen_addr_r} /xen-@@MACHINE@@ - -#configure dom0 -fdt addr ${fdt_addr} - -#read prepared bootargs, rapsberry pi prepared initial list of the parameters for loading -fdt get value bootargs /chosen bootargs -fdt resize 8192 - -# add device type for raspberry -fdt set pcie0 device_type "pci" - -fdt chosen -fdt set /chosen \#address-cells <1> -fdt set /chosen \#size-cells <1> - -# Load Linux Image to ${kernel_addr_r} -fatload mmc 0:1 ${kernel_addr_r} /@@KERNEL_IMAGETYPE@@ - -# we load dom0 with 1512 MB of memory -fdt mknod /chosen dom0 -fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/soc/serial@7e215040 sync_console dom0_mem=1512M bootscrub=0" -fdt set /chosen xen,dom0-bootargs "${bootargs}" - -fdt set /chosen/dom0 compatible "xen,linux-zimage", "xen,multiboot-module" -fdt set /chosen/dom0 reg <${kernel_addr_r} 0x${filesize} > - -@@KERNEL_BOOTCMD@@ ${xen_addr_r} - ${fdt_addr} |